* MMC card bus driver model
*/
+#include <linux/export.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/slab.h>
+#include <linux/stat.h>
#include <linux/pm_runtime.h>
#include <linux/mmc/card.h>
{
int ret;
const char *type;
+ const char *uhs_bus_speed_mode = "";
+ static const char *const uhs_speeds[] = {
+ [UHS_SDR12_BUS_SPEED] = "SDR12 ",
+ [UHS_SDR25_BUS_SPEED] = "SDR25 ",
+ [UHS_SDR50_BUS_SPEED] = "SDR50 ",
+ [UHS_SDR104_BUS_SPEED] = "SDR104 ",
+ [UHS_DDR50_BUS_SPEED] = "DDR50 ",
+ };
+
dev_set_name(&card->dev, "%s:%04x", mmc_hostname(card->host), card->rca);
break;
}
+ if (mmc_sd_card_uhs(card) &&
+ (card->sd_bus_speed < ARRAY_SIZE(uhs_speeds)))
+ uhs_bus_speed_mode = uhs_speeds[card->sd_bus_speed];
+
if (mmc_host_is_spi(card->host)) {
- printk(KERN_INFO "%s: new %s%s%s card on SPI\n",
+ pr_info("%s: new %s%s%s card on SPI\n",
mmc_hostname(card->host),
mmc_card_highspeed(card) ? "high speed " : "",
mmc_card_ddr_mode(card) ? "DDR " : "",
type);
} else {
- printk(KERN_INFO "%s: new %s%s%s card at address %04x\n",
+ pr_info("%s: new %s%s%s%s%s card at address %04x\n",
mmc_hostname(card->host),
mmc_sd_card_uhs(card) ? "ultra high speed " :
(mmc_card_highspeed(card) ? "high speed " : ""),
+ (mmc_card_hs200(card) ? "HS200 " : ""),
mmc_card_ddr_mode(card) ? "DDR " : "",
- type, card->rca);
+ uhs_bus_speed_mode, type, card->rca);
}
#ifdef CONFIG_DEBUG_FS
#define MMC_STATE_HIGHSPEED_DDR (1<<4) /* card is in high speed mode */
#define MMC_STATE_ULTRAHIGHSPEED (1<<5) /* card is in ultra high speed mode */
#define MMC_CARD_SDXC (1<<6) /* card is SDXC */
+#define MMC_CARD_REMOVED (1<<7) /* card has been removed */
+#define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */
+#define MMC_STATE_DOING_BKOPS (1<<10) /* card is doing BKOPS */
+
unsigned int quirks; /* card quirks */
#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
#define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */
#define MMC_QUIRK_DISABLE_CD (1<<5) /* disconnect CD/DAT[3] resistor */
#define MMC_QUIRK_INAND_CMD38 (1<<6) /* iNAND devices have broken CMD38 */
#define MMC_QUIRK_BLK_NO_CMD23 (1<<7) /* Avoid CMD23 for regular multiblock */
+#define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8) /* Avoid sending 512 bytes in */
+#define MMC_QUIRK_LONG_READ_TIME (1<<9) /* Data read time > CSD says */
+#define MMC_QUIRK_SEC_ERASE_TRIM_BROKEN (1<<10) /* Skip secure for erase/trim */
+
unsigned int erase_size; /* erase size in sectors */
unsigned int erase_shift; /* if erase unit is power 2 */
#define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT)
#define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY)
#define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED)
+#define mmc_card_hs200(c) ((c)->state & MMC_STATE_HIGHSPEED_200)
#define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR)
#define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR)
#define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)