ARM: tegra: add DT entry for nct1008 to Dalmore

Enable thermal sensor nct1008 for Tegra114 dalmore.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 871aff5e2b87f1a05b472904d9e36fc613133ee1..cb5ec23b03a71b59e8fac5f3df740f3eaa730f32 100644 (file)
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -739,6 +739,14 @@
                        realtek,ldo1-en-gpios =
                                <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
                };
+
+               temperature-sensor@4c {
+                       compatible = "onnn,nct1008";
+                       reg = <0x4c>;
+                       vcc-supply = <&palmas_ldo6_reg>;
+                       interrupt-parent = <&gpio>;
+                       interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+               };
        };
 
        i2c@7000d000 {
@@ -948,7 +956,7 @@
                                                regulator-max-microvolt = <1800000>;
                                        };
 
-                                       ldo6 {
+                                       palmas_ldo6_reg: ldo6 {
                                                regulator-name = "vdd-sensor-2v85";
                                                regulator-min-microvolt = <2850000>;
                                                regulator-max-microvolt = <2850000>;