--- /dev/null
+#!/bin/bash
+
+#set -x # echo invoked commands to std out
+
+# Base dir should point to the experimental_result folder which contains the subfolders:
+# - 'smarthome' which contains the traces collected while other devices are idle
+# - 'standalone' which contains signatures and the traces used to generate the signatures.
+BASE_DIR=$1
+readonly BASE_DIR
+
+OUTPUT_DIR=$2
+readonly OUTPUT_DIR
+
+PCAP_FILE_UNB=$3
+readonly PCAP_FILE_UNB
+
+PCAPS_BASE_DIR="$BASE_DIR/smarthome"
+readonly PCAPS_BASE_DIR
+
+SIGNATURES_BASE_DIR="$BASE_DIR/standalone"
+readonly SIGNATURES_BASE_DIR
+
+# ==================================================== ARLO CAMERA =====================================================
+# Has no device side signature.
+PCAP_FILE=${PCAP_FILE_UNB}
+echo "$PCAP_FILE"
+
+# PHONE SIDE (TODO: may possibly be the .incomplete signatures)
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/arlo-camera/analysis/arlo-camera-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/arlo-camera/analysis/arlo-camera-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/arlo-camera/signatures/arlo-camera-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/arlo-camera/signatures/arlo-camera-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/arlo-camera/arlo-camera.eth0.detection.pcap___phone-side$i.detectionresults"
+SIGNATURE_DURATION="213"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+# ======================================================================================================================
+
+
+
+# ================================================= BLOSSOM SPRINKLER ==================================================
+# DEVICE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/blossom-sprinkler/analysis/blossom-sprinkler-onClusters-device-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/blossom-sprinkler/analysis/blossom-sprinkler-offClusters-device-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/blossom-sprinkler/signatures/blossom-sprinkler-onSignature-device-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/blossom-sprinkler/signatures/blossom-sprinkler-offSignature-device-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/blossom-sprinkler/blossom-sprinkler.eth0.detection.pcap___device-side$i.detectionresults"
+SIGNATURE_DURATION="9274"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/blossom-sprinkler/analysis/blossom-sprinkler-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/blossom-sprinkler/analysis/blossom-sprinkler-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/blossom-sprinkler/signatures/blossom-sprinkler-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/blossom-sprinkler/signatures/blossom-sprinkler-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/blossom-sprinkler/blossom-sprinkler.eth0.detection.pcap___phone-side$i.detectionresults"
+SIGNATURE_DURATION="3670"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+# ======================================================================================================================
+
+
+
+# ==================================================== D-LINK PLUG =====================================================
+# DEVICE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/dlink-plug/analysis/dlink-plug-onClusters-device-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/dlink-plug/analysis/dlink-plug-offClusters-device-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/dlink-plug/signatures/dlink-plug-onSignature-device-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/dlink-plug/signatures/dlink-plug-offSignature-device-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/dlink-plug/dlink-plug.eth0.detection.pcap___device-side$i.detectionresults"
+SIGNATURE_DURATION="8866"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/dlink-plug/analysis/dlink-plug-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/dlink-plug/analysis/dlink-plug-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/dlink-plug/signatures/dlink-plug-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/dlink-plug/signatures/dlink-plug-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/dlink-plug/dlink-plug.eth0.detection.pcap___phone-side$i.detectionresults"
+SIGNATURE_DURATION="193"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+# ======================================================================================================================
+
+
+
+# ==================================================== D-LINK SIREN ====================================================
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/dlink-siren/analysis/dlink-siren-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/dlink-siren/analysis/dlink-siren-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/dlink-siren/signatures/dlink-siren-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/dlink-siren/signatures/dlink-siren-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/dlink-siren/dlink-siren.eth0.detection.pcap___phone-side$i.detectionresults"
+SIGNATURE_DURATION="71"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+# ======================================================================================================================
+
+
+
+# ===================================================== HUE BULB =======================================================
+# Has no device side signature.
+
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/hue-bulb/analysis/hue-bulb-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/hue-bulb/analysis/hue-bulb-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/hue-bulb/signatures/hue-bulb-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/hue-bulb/signatures/hue-bulb-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/hue-bulb/hue-bulb.eth0.detection.pcap___phone-side$i.detectionresults"
+SIGNATURE_DURATION="27"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+# ======================================================================================================================
+
+
+
+# ================================================= KWIKSET DOORLOCK ===================================================
+# Has no device side signature.
+
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/kwikset-doorlock/analysis/kwikset-doorlock-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/kwikset-doorlock/analysis/kwikset-doorlock-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/kwikset-doorlock/signatures/kwikset-doorlock-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/kwikset-doorlock/signatures/kwikset-doorlock-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/kwikset-doorlock/kwikset-doorlock.eth0.detection.pcap___phone-side$i.detectionresults"
+SIGNATURE_DURATION="3161"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+# ======================================================================================================================
+
+
+
+# ================================================= NEST THERMOSTAT ====================================================
+# Has no device side signature.
+
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/nest-thermostat/analysis/nest-thermostat-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/nest-thermostat/analysis/nest-thermostat-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/nest-thermostat/signatures/nest-thermostat-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/nest-thermostat/signatures/nest-thermostat-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/nest-thermostat/nest-thermostat.eth0.detection.pcap___phone-side$i.detectionresults"
+SIGNATURE_DURATION="1179"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+# ======================================================================================================================
+
+
+
+# ====================================================== ST PLUG =======================================================
+# Has no device side signature.
+
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/st-plug/analysis/st-plug-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/st-plug/analysis/st-plug-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/st-plug/signatures/st-plug-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/st-plug/signatures/st-plug-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/st-plug/st-plug.wlan1.detection.pcap___phone-side$i.detectionresults"
+SIGNATURE_DURATION="2445"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+# ======================================================================================================================
+
+
+
+# ==================================================== TP-LINK BULB ====================================================
+# Has no device side signature.
+
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-bulb/analysis/tplink-bulb-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-bulb/analysis/tplink-bulb-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-bulb/signatures/tplink-bulb-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-bulb/signatures/tplink-bulb-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/tplink-bulb/tplink-bulb.wlan1.wan-detection.pcap___phone-side$i.detectionresults"
+SIGNATURE_DURATION="162"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+# ======================================================================================================================
+
+
+
+# ==================================================== TP-LINK PLUG ====================================================
+# DEVICE SIDE (both the 112, 115 and 556, 1293 sequences)
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-plug/analysis/tplink-plug-onClusters.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-plug/analysis/tplink-plug-offClusters.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-plug/signatures/tplink-plug-onSignature-device-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-plug/signatures/tplink-plug-offSignature-device-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/tplink-plug/tplink-plug.wlan1.wan-detection.pcap___device-side$i.detectionresults"
+SIGNATURE_DURATION="3660"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+
+# DEVICE SIDE OUTBOUND (contains only those packets that go through the WAN port, i.e., only the 556, 1293 sequence)
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-plug/analysis/tplink-plug-onClusters.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-plug/analysis/tplink-plug-offClusters.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-plug/signatures/tplink-plug-onSignature-device-side-outbound.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-plug/signatures/tplink-plug-offSignature-device-side-outbound.sig"
+RESULTS_FILE="$OUTPUT_DIR/tplink-plug/tplink-plug.wlan1.wan-detection.pcap___device-side-outbound$i.detectionresults"
+SIGNATURE_DURATION="224"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+
+# Phone side does not make sense as it is merely a subset of the device side and does not differentiate ONs from OFFs.
+# ======================================================================================================================
+
+
+
+# ================================================== WEMO INSIGHT PLUG =================================================
+# Has no device side signature.
+
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/wemo-insight-plug/analysis/wemo-insight-plug-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/wemo-insight-plug/analysis/wemo-insight-plug-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/wemo-insight-plug/signatures/wemo-insight-plug-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/wemo-insight-plug/signatures/wemo-insight-plug-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/wemo-insight-plug/wemo-insight-plug.wlan1.wan-detection.pcap___phone-side$i.detectionresults"
+SIGNATURE_DURATION="106"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+# ======================================================================================================================
+
+
+
+# ===================================================== WEMO PLUG ======================================================
+# Has no device side signature.
+
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/wemo-plug/analysis/wemo-plug-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/wemo-plug/analysis/wemo-plug-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/wemo-plug/signatures/wemo-plug-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/wemo-plug/signatures/wemo-plug-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/wemo-plug/wemo-plug.wlan1.wan-detection.pcap___phone-side$i.detectionresults"
+SIGNATURE_DURATION="147"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+# ======================================================================================================================
+
--- /dev/null
+#!/bin/bash
+
+#set -x # echo invoked commands to std out
+
+# Base dir should point to the experimental_result folder which contains the subfolders:
+# - 'smarthome' which contains the traces collected while other devices are idle
+# - 'standalone' which contains signatures and the traces used to generate the signatures.
+BASE_DIR=$1
+readonly BASE_DIR
+
+OUTPUT_DIR=$2
+readonly OUTPUT_DIR
+
+BASE_DIR_UNSW=$3
+readonly BASE_DIR_UNSW
+
+PCAPS_BASE_DIR="$BASE_DIR/smarthome"
+readonly PCAPS_BASE_DIR
+
+SIGNATURES_BASE_DIR="$BASE_DIR/standalone"
+readonly SIGNATURES_BASE_DIR
+
+# Files that are too big or could generate errors but results are valid
+PCAP_FILE_ARR[0]="$BASE_DIR_UNSW/UNSW/16-09-28.pcap"
+PCAP_FILE_ARR[1]="$BASE_DIR_UNSW/UNSW/16-10-02.pcap"
+PCAP_FILE_ARR[2]="$BASE_DIR_UNSW/UNSW/16-10-03.pcap"
+PCAP_FILE_ARR[3]="$BASE_DIR_UNSW/UNSW/16-10-04-a.pcap"
+PCAP_FILE_ARR[4]="$BASE_DIR_UNSW/UNSW/16-10-04-b.pcap"
+PCAP_FILE_ARR[5]="$BASE_DIR_UNSW/UNSW/16-10-07.pcap"
+PCAP_FILE_ARR[6]="$BASE_DIR_UNSW/UNSW/16-10-08.pcap"
+PCAP_FILE_ARR[7]="$BASE_DIR_UNSW/UNSW/16-10-09.pcap"
+PCAP_FILE_ARR[8]="$BASE_DIR_UNSW/UNSW/16-10-10.pcap"
+PCAP_FILE_ARR[9]="$BASE_DIR_UNSW/UNSW/16-10-11.pcap"
+PCAP_FILE_ARR[10]="$BASE_DIR_UNSW/UNSW/16-10-12-a.pcap"
+PCAP_FILE_ARR[11]="$BASE_DIR_UNSW/UNSW/16-10-12-b.pcap"
+PCAP_FILE_ARR[12]="$BASE_DIR_UNSW/UNSW/16-10-12-c.pcap"
+PCAP_FILE_ARR[13]="$BASE_DIR_UNSW/UNSW/16-10-12-d.pcap"
+# Normal files with valid results
+PCAP_FILE_ARR[14]="$BASE_DIR_UNSW/UNSW/16-09-23.pcap"
+PCAP_FILE_ARR[15]="$BASE_DIR_UNSW/UNSW/16-09-24.pcap"
+PCAP_FILE_ARR[16]="$BASE_DIR_UNSW/UNSW/16-09-25.pcap"
+PCAP_FILE_ARR[17]="$BASE_DIR_UNSW/UNSW/16-09-26.pcap"
+PCAP_FILE_ARR[18]="$BASE_DIR_UNSW/UNSW/16-09-27.pcap"
+PCAP_FILE_ARR[19]="$BASE_DIR_UNSW/UNSW/16-09-29.pcap"
+PCAP_FILE_ARR[20]="$BASE_DIR_UNSW/UNSW/16-10-01.pcap"
+PCAP_FILE_ARR[21]="$BASE_DIR_UNSW/UNSW/16-10-06.pcap"
+
+for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
+do
+ # ==================================================== ARLO CAMERA =====================================================
+ # Has no device side signature.
+ PCAP_FILE=${PCAP_FILE_ARR[$i]}
+
+ echo "$PCAP_FILE"
+
+ # PHONE SIDE (TODO: may possibly be the .incomplete signatures)
+ ON_ANALYSIS="$SIGNATURES_BASE_DIR/arlo-camera/analysis/arlo-camera-onClusters-phone-side.cls"
+ OFF_ANALYSIS="$SIGNATURES_BASE_DIR/arlo-camera/analysis/arlo-camera-offClusters-phone-side.cls"
+ ON_SIGNATURE="$SIGNATURES_BASE_DIR/arlo-camera/signatures/arlo-camera-onSignature-phone-side.sig"
+ OFF_SIGNATURE="$SIGNATURES_BASE_DIR/arlo-camera/signatures/arlo-camera-offSignature-phone-side.sig"
+ RESULTS_FILE="$OUTPUT_DIR/arlo-camera/arlo-camera.eth0.detection.pcap___phone-side$i.detectionresults"
+ SIGNATURE_DURATION="213"
+
+ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+ ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+ # ======================================================================================================================
+
+
+
+ # ================================================= BLOSSOM SPRINKLER ==================================================
+ # DEVICE SIDE
+ ON_ANALYSIS="$SIGNATURES_BASE_DIR/blossom-sprinkler/analysis/blossom-sprinkler-onClusters-device-side.cls"
+ OFF_ANALYSIS="$SIGNATURES_BASE_DIR/blossom-sprinkler/analysis/blossom-sprinkler-offClusters-device-side.cls"
+ ON_SIGNATURE="$SIGNATURES_BASE_DIR/blossom-sprinkler/signatures/blossom-sprinkler-onSignature-device-side.sig"
+ OFF_SIGNATURE="$SIGNATURES_BASE_DIR/blossom-sprinkler/signatures/blossom-sprinkler-offSignature-device-side.sig"
+ RESULTS_FILE="$OUTPUT_DIR/blossom-sprinkler/blossom-sprinkler.eth0.detection.pcap___device-side$i.detectionresults"
+ SIGNATURE_DURATION="9274"
+
+ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+ ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+
+ # PHONE SIDE
+ ON_ANALYSIS="$SIGNATURES_BASE_DIR/blossom-sprinkler/analysis/blossom-sprinkler-onClusters-phone-side.cls"
+ OFF_ANALYSIS="$SIGNATURES_BASE_DIR/blossom-sprinkler/analysis/blossom-sprinkler-offClusters-phone-side.cls"
+ ON_SIGNATURE="$SIGNATURES_BASE_DIR/blossom-sprinkler/signatures/blossom-sprinkler-onSignature-phone-side.sig"
+ OFF_SIGNATURE="$SIGNATURES_BASE_DIR/blossom-sprinkler/signatures/blossom-sprinkler-offSignature-phone-side.sig"
+ RESULTS_FILE="$OUTPUT_DIR/blossom-sprinkler/blossom-sprinkler.eth0.detection.pcap___phone-side$i.detectionresults"
+ SIGNATURE_DURATION="3670"
+
+ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+ ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+ # ======================================================================================================================
+
+
+
+ # ==================================================== D-LINK PLUG =====================================================
+ # DEVICE SIDE
+ ON_ANALYSIS="$SIGNATURES_BASE_DIR/dlink-plug/analysis/dlink-plug-onClusters-device-side.cls"
+ OFF_ANALYSIS="$SIGNATURES_BASE_DIR/dlink-plug/analysis/dlink-plug-offClusters-device-side.cls"
+ ON_SIGNATURE="$SIGNATURES_BASE_DIR/dlink-plug/signatures/dlink-plug-onSignature-device-side.sig"
+ OFF_SIGNATURE="$SIGNATURES_BASE_DIR/dlink-plug/signatures/dlink-plug-offSignature-device-side.sig"
+ RESULTS_FILE="$OUTPUT_DIR/dlink-plug/dlink-plug.eth0.detection.pcap___device-side$i.detectionresults"
+ SIGNATURE_DURATION="8866"
+
+ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+ #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+
+ # PHONE SIDE
+ ON_ANALYSIS="$SIGNATURES_BASE_DIR/dlink-plug/analysis/dlink-plug-onClusters-phone-side.cls"
+ OFF_ANALYSIS="$SIGNATURES_BASE_DIR/dlink-plug/analysis/dlink-plug-offClusters-phone-side.cls"
+ ON_SIGNATURE="$SIGNATURES_BASE_DIR/dlink-plug/signatures/dlink-plug-onSignature-phone-side.sig"
+ OFF_SIGNATURE="$SIGNATURES_BASE_DIR/dlink-plug/signatures/dlink-plug-offSignature-phone-side.sig"
+ RESULTS_FILE="$OUTPUT_DIR/dlink-plug/dlink-plug.eth0.detection.pcap___phone-side$i.detectionresults"
+ SIGNATURE_DURATION="193"
+
+ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+ #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+ # ======================================================================================================================
+
+
+
+ # ==================================================== D-LINK SIREN ====================================================
+ # PHONE SIDE
+ ON_ANALYSIS="$SIGNATURES_BASE_DIR/dlink-siren/analysis/dlink-siren-onClusters-phone-side.cls"
+ OFF_ANALYSIS="$SIGNATURES_BASE_DIR/dlink-siren/analysis/dlink-siren-offClusters-phone-side.cls"
+ ON_SIGNATURE="$SIGNATURES_BASE_DIR/dlink-siren/signatures/dlink-siren-onSignature-phone-side.sig"
+ OFF_SIGNATURE="$SIGNATURES_BASE_DIR/dlink-siren/signatures/dlink-siren-offSignature-phone-side.sig"
+ RESULTS_FILE="$OUTPUT_DIR/dlink-siren/dlink-siren.eth0.detection.pcap___phone-side$i.detectionresults"
+ SIGNATURE_DURATION="71"
+
+ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+ #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+ # ======================================================================================================================
+
+
+
+ # ===================================================== HUE BULB =======================================================
+ # Has no device side signature.
+
+ # PHONE SIDE
+ ON_ANALYSIS="$SIGNATURES_BASE_DIR/hue-bulb/analysis/hue-bulb-onClusters-phone-side.cls"
+ OFF_ANALYSIS="$SIGNATURES_BASE_DIR/hue-bulb/analysis/hue-bulb-offClusters-phone-side.cls"
+ ON_SIGNATURE="$SIGNATURES_BASE_DIR/hue-bulb/signatures/hue-bulb-onSignature-phone-side.sig"
+ OFF_SIGNATURE="$SIGNATURES_BASE_DIR/hue-bulb/signatures/hue-bulb-offSignature-phone-side.sig"
+ RESULTS_FILE="$OUTPUT_DIR/hue-bulb/hue-bulb.eth0.detection.pcap___phone-side$i.detectionresults"
+ SIGNATURE_DURATION="27"
+
+ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+ #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+ # ======================================================================================================================
+
+
+
+ # ================================================= KWIKSET DOORLOCK ===================================================
+ # Has no device side signature.
+
+ # PHONE SIDE
+ ON_ANALYSIS="$SIGNATURES_BASE_DIR/kwikset-doorlock/analysis/kwikset-doorlock-onClusters-phone-side.cls"
+ OFF_ANALYSIS="$SIGNATURES_BASE_DIR/kwikset-doorlock/analysis/kwikset-doorlock-offClusters-phone-side.cls"
+ ON_SIGNATURE="$SIGNATURES_BASE_DIR/kwikset-doorlock/signatures/kwikset-doorlock-onSignature-phone-side.sig"
+ OFF_SIGNATURE="$SIGNATURES_BASE_DIR/kwikset-doorlock/signatures/kwikset-doorlock-offSignature-phone-side.sig"
+ RESULTS_FILE="$OUTPUT_DIR/kwikset-doorlock/kwikset-doorlock.eth0.detection.pcap___phone-side$i.detectionresults"
+ SIGNATURE_DURATION="3161"
+
+ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+ #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+ # ======================================================================================================================
+
+
+
+ # ================================================= NEST THERMOSTAT ====================================================
+ # Has no device side signature.
+
+ # PHONE SIDE
+ ON_ANALYSIS="$SIGNATURES_BASE_DIR/nest-thermostat/analysis/nest-thermostat-onClusters-phone-side.cls"
+ OFF_ANALYSIS="$SIGNATURES_BASE_DIR/nest-thermostat/analysis/nest-thermostat-offClusters-phone-side.cls"
+ ON_SIGNATURE="$SIGNATURES_BASE_DIR/nest-thermostat/signatures/nest-thermostat-onSignature-phone-side.sig"
+ OFF_SIGNATURE="$SIGNATURES_BASE_DIR/nest-thermostat/signatures/nest-thermostat-offSignature-phone-side.sig"
+ RESULTS_FILE="$OUTPUT_DIR/nest-thermostat/nest-thermostat.eth0.detection.pcap___phone-side$i.detectionresults"
+ SIGNATURE_DURATION="1179"
+
+ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+ ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+ # ======================================================================================================================
+
+
+
+ # ====================================================== ST PLUG =======================================================
+ # Has no device side signature.
+
+ # PHONE SIDE
+ ON_ANALYSIS="$SIGNATURES_BASE_DIR/st-plug/analysis/st-plug-onClusters-phone-side.cls"
+ OFF_ANALYSIS="$SIGNATURES_BASE_DIR/st-plug/analysis/st-plug-offClusters-phone-side.cls"
+ ON_SIGNATURE="$SIGNATURES_BASE_DIR/st-plug/signatures/st-plug-onSignature-phone-side.sig"
+ OFF_SIGNATURE="$SIGNATURES_BASE_DIR/st-plug/signatures/st-plug-offSignature-phone-side.sig"
+ RESULTS_FILE="$OUTPUT_DIR/st-plug/st-plug.wlan1.detection.pcap___phone-side$i.detectionresults"
+ SIGNATURE_DURATION="2445"
+
+ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+ #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+ # ======================================================================================================================
+
+
+
+ # ==================================================== TP-LINK BULB ====================================================
+ # Has no device side signature.
+
+ # PHONE SIDE
+ ON_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-bulb/analysis/tplink-bulb-onClusters-phone-side.cls"
+ OFF_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-bulb/analysis/tplink-bulb-offClusters-phone-side.cls"
+ ON_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-bulb/signatures/tplink-bulb-onSignature-phone-side.sig"
+ OFF_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-bulb/signatures/tplink-bulb-offSignature-phone-side.sig"
+ RESULTS_FILE="$OUTPUT_DIR/tplink-bulb/tplink-bulb.wlan1.wan-detection.pcap___phone-side$i.detectionresults"
+ SIGNATURE_DURATION="162"
+
+ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+ #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+ # ======================================================================================================================
+
+
+
+ # ==================================================== TP-LINK PLUG ====================================================
+ # DEVICE SIDE (both the 112, 115 and 556, 1293 sequences)
+ ON_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-plug/analysis/tplink-plug-onClusters.cls"
+ OFF_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-plug/analysis/tplink-plug-offClusters.cls"
+ ON_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-plug/signatures/tplink-plug-onSignature-device-side.sig"
+ OFF_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-plug/signatures/tplink-plug-offSignature-device-side.sig"
+ RESULTS_FILE="$OUTPUT_DIR/tplink-plug/tplink-plug.wlan1.wan-detection.pcap___device-side$i.detectionresults"
+ SIGNATURE_DURATION="3660"
+
+ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+ #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+
+ # DEVICE SIDE OUTBOUND (contains only those packets that go through the WAN port, i.e., only the 556, 1293 sequence)
+ ON_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-plug/analysis/tplink-plug-onClusters.cls"
+ OFF_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-plug/analysis/tplink-plug-offClusters.cls"
+ ON_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-plug/signatures/tplink-plug-onSignature-device-side-outbound.sig"
+ OFF_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-plug/signatures/tplink-plug-offSignature-device-side-outbound.sig"
+ RESULTS_FILE="$OUTPUT_DIR/tplink-plug/tplink-plug.wlan1.wan-detection.pcap___device-side-outbound$i.detectionresults"
+ SIGNATURE_DURATION="224"
+
+ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+ #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+
+ # Phone side does not make sense as it is merely a subset of the device side and does not differentiate ONs from OFFs.
+ # ======================================================================================================================
+
+
+
+ # ================================================== WEMO INSIGHT PLUG =================================================
+ # Has no device side signature.
+
+ # PHONE SIDE
+ ON_ANALYSIS="$SIGNATURES_BASE_DIR/wemo-insight-plug/analysis/wemo-insight-plug-onClusters-phone-side.cls"
+ OFF_ANALYSIS="$SIGNATURES_BASE_DIR/wemo-insight-plug/analysis/wemo-insight-plug-offClusters-phone-side.cls"
+ ON_SIGNATURE="$SIGNATURES_BASE_DIR/wemo-insight-plug/signatures/wemo-insight-plug-onSignature-phone-side.sig"
+ OFF_SIGNATURE="$SIGNATURES_BASE_DIR/wemo-insight-plug/signatures/wemo-insight-plug-offSignature-phone-side.sig"
+ RESULTS_FILE="$OUTPUT_DIR/wemo-insight-plug/wemo-insight-plug.wlan1.wan-detection.pcap___phone-side$i.detectionresults"
+ SIGNATURE_DURATION="106"
+
+ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+ #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+ # ======================================================================================================================
+
+
+
+ # ===================================================== WEMO PLUG ======================================================
+ # Has no device side signature.
+
+ # PHONE SIDE
+ ON_ANALYSIS="$SIGNATURES_BASE_DIR/wemo-plug/analysis/wemo-plug-onClusters-phone-side.cls"
+ OFF_ANALYSIS="$SIGNATURES_BASE_DIR/wemo-plug/analysis/wemo-plug-offClusters-phone-side.cls"
+ ON_SIGNATURE="$SIGNATURES_BASE_DIR/wemo-plug/signatures/wemo-plug-onSignature-phone-side.sig"
+ OFF_SIGNATURE="$SIGNATURES_BASE_DIR/wemo-plug/signatures/wemo-plug-offSignature-phone-side.sig"
+ RESULTS_FILE="$OUTPUT_DIR/wemo-plug/wemo-plug.wlan1.wan-detection.pcap___phone-side$i.detectionresults"
+ SIGNATURE_DURATION="147"
+
+ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION'"
+ #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+ # ======================================================================================================================
+done
public static void main(String[] args) throws PcapNativeException, NotOpenException, IOException {
// Parse required parameters.
- if (args.length < 7) {
+// if (args.length < 7) {
+ if (args.length < 5) {
String errMsg = String.format("Usage: %s inputPcapFile onAnalysisFile offAnalysisFile onSignatureFile offSignatureFile resultsFile" +
"\n inputPcapFile: the target of the detection" +
- "\n onAnalysisFile: the file that contains the ON clusters analysis" +
- "\n offAnalysisFile: the file that contains the OFF clusters analysis" +
+// "\n onAnalysisFile: the file that contains the ON clusters analysis" +
+// "\n offAnalysisFile: the file that contains the OFF clusters analysis" +
"\n onSignatureFile: the file that contains the ON signature to search for" +
"\n offSignatureFile: the file that contains the OFF signature to search for" +
"\n resultsFile: where to write the results of the detection" +
System.out.println(optParamsExplained);
return;
}
+// final String pcapFile = args[0];
+// final String onClusterAnalysisFile = args[1];
+// final String offClusterAnalysisFile = args[2];
+// final String onSignatureFile = args[3];
+// final String offSignatureFile = args[4];
+// final String resultsFile = args[5];
+// final int signatureDuration = Integer.parseInt(args[6]);
+
final String pcapFile = args[0];
- final String onClusterAnalysisFile = args[1];
- final String offClusterAnalysisFile = args[2];
- final String onSignatureFile = args[3];
- final String offSignatureFile = args[4];
- final String resultsFile = args[5];
- final int signatureDuration = Integer.parseInt(args[6]);
+ final String onSignatureFile = args[1];
+ final String offSignatureFile = args[2];
+ final String resultsFile = args[3];
+ final int signatureDuration = Integer.parseInt(args[4]);
// Parse optional parameters.
List<Function<Layer2Flow, Boolean>> onSignatureMacFilters = null, offSignatureMacFilters = null;
// Include metadata as comments at the top
PrintWriterUtils.println("# Detection results for:", resultsWriter, DUPLICATE_OUTPUT_TO_STD_OUT);
PrintWriterUtils.println("# - inputPcapFile: " + pcapFile, resultsWriter, DUPLICATE_OUTPUT_TO_STD_OUT);
- PrintWriterUtils.println("# - onAnalysisFile: " + onClusterAnalysisFile, resultsWriter, DUPLICATE_OUTPUT_TO_STD_OUT);
- PrintWriterUtils.println("# - offAnalysisFile: " + offClusterAnalysisFile, resultsWriter, DUPLICATE_OUTPUT_TO_STD_OUT);
+// PrintWriterUtils.println("# - onAnalysisFile: " + onClusterAnalysisFile, resultsWriter, DUPLICATE_OUTPUT_TO_STD_OUT);
+// PrintWriterUtils.println("# - offAnalysisFile: " + offClusterAnalysisFile, resultsWriter, DUPLICATE_OUTPUT_TO_STD_OUT);
PrintWriterUtils.println("# - onSignatureFile: " + onSignatureFile, resultsWriter, DUPLICATE_OUTPUT_TO_STD_OUT);
PrintWriterUtils.println("# - offSignatureFile: " + offSignatureFile, resultsWriter, DUPLICATE_OUTPUT_TO_STD_OUT);
resultsWriter.flush();
List<List<List<PcapPacket>>> onSignature = PrintUtils.deserializeFromFile(onSignatureFile);
List<List<List<PcapPacket>>> offSignature = PrintUtils.deserializeFromFile(offSignatureFile);
// Load signature analyses
- List<List<List<PcapPacket>>> onClusterAnalysis = PrintUtils.deserializeFromFile(onClusterAnalysisFile);
- List<List<List<PcapPacket>>> offClusterAnalysis = PrintUtils.deserializeFromFile(offClusterAnalysisFile);
+
// List<List<List<PcapPacket>>> onClusterAnalysis = PrintUtils.deserializeFromFile(onClusterAnalysisFile);
+
// List<List<List<PcapPacket>>> offClusterAnalysis = PrintUtils.deserializeFromFile(offClusterAnalysisFile);
// TODO: FOR NOW WE DECIDE PER SIGNATURE AND THEN WE OR THE BOOLEANS
// TODO: SINCE WE ONLY HAVE 2 SIGNATURES FOR NOW (ON AND OFF), THEN IT IS USUALLY EITHER RANGE-BASED OR
// TODO: STRICT MATCHING
// Check if we should use range-based matching
// boolean isRangeBasedForOn = PcapPacketUtils.isRangeBasedMatching(onSignature, eps, offSignature);
// boolean isRangeBasedForOff = PcapPacketUtils.isRangeBasedMatching(offSignature, eps, onSignature);
+// // Update the signature with ranges if it is range-based
+// if (isRangeBasedForOn && isRangeBasedForOff) {
+// onSignature = PcapPacketUtils.useRangeBasedMatching(onSignature, onClusterAnalysis);
+// offSignature = PcapPacketUtils.useRangeBasedMatching(offSignature, offClusterAnalysis);
+// }
// TODO: WE DON'T DO RANGE-BASED FOR NOW BECAUSE THE RESULTS ARE TERRIBLE FOR LAYER 2 MATCHING
// TODO: THIS WOULD ONLY WORK FOR SIGNATURES LONGER THAN 2 PACKETS
boolean isRangeBasedForOn = false;
boolean isRangeBasedForOff = false;
- // Update the signature with ranges if it is range-based
- if (isRangeBasedForOn && isRangeBasedForOff) {
- onSignature = PcapPacketUtils.useRangeBasedMatching(onSignature, onClusterAnalysis);
- offSignature = PcapPacketUtils.useRangeBasedMatching(offSignature, offClusterAnalysis);
- }
Layer2SignatureDetector onDetector = onSignatureMacFilters == null ?
new Layer2SignatureDetector(onSignature, isRangeBasedForOn, eps) :
new Layer2SignatureDetector(onSignature, onSignatureMacFilters, signatureDuration, isRangeBasedForOn, eps);
// WAN
Layer3SignatureDetector onDetector = new Layer3SignatureDetector(onSignature, ROUTER_WAN_IP,
- 0, isRangeBasedForOn, eps);
+ signatureDuration, isRangeBasedForOn, eps);
Layer3SignatureDetector offDetector = new Layer3SignatureDetector(offSignature, ROUTER_WAN_IP,
- 0, isRangeBasedForOff, eps);
+ signatureDuration, isRangeBasedForOff, eps);
final DateTimeFormatter dateTimeFormatter = DateTimeFormatter.ofLocalizedDateTime(FormatStyle.MEDIUM).
withLocale(Locale.US).withZone(ZoneId.of("America/Los_Angeles"));
// Output the detected events
detectedEvents.forEach(outputter);
- System.out.println("Number of detected events of type " + UserAction.Type.TOGGLE_ON + ": " +
- detectedEvents.stream().filter(ua -> ua.getType() == UserAction.Type.TOGGLE_ON).count());
- System.out.println("Number of detected events of type " + UserAction.Type.TOGGLE_OFF + ": " +
- detectedEvents.stream().filter(ua -> ua.getType() == UserAction.Type.TOGGLE_OFF).count());
+ String resultOn = "Number of detected events of type " + UserAction.Type.TOGGLE_ON + ": " +
+ detectedEvents.stream().filter(ua -> ua.getType() == UserAction.Type.TOGGLE_ON).count();
+ String resultOff = "Number of detected events of type " + UserAction.Type.TOGGLE_OFF + ": " +
+ detectedEvents.stream().filter(ua -> ua.getType() == UserAction.Type.TOGGLE_OFF).count();
+ PrintWriterUtils.println(resultOn, resultsWriter, DUPLICATE_OUTPUT_TO_STD_OUT);
+ PrintWriterUtils.println(resultOff, resultsWriter, DUPLICATE_OUTPUT_TO_STD_OUT);
+ System.out.println(resultOn);
+ System.out.println(resultOff);
+
// Flush output to results file and close it.
resultsWriter.flush();
projects / pingpong.git / commitdiff