The drivers/tty/serial dir is already getting rather busy.
Relocate the 8250 related drivers to their own subdir to
reduce the clutter.
Note that sunsu.c is not included in this move -- it is
8250-like hardware, but it does not use any of the existing
infrastructure -- and does not depend on SERIAL_8250.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
+++ /dev/null
-/*
- * Driver for 8250/16550-type serial ports
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *
- * Copyright (C) 2001 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * A note about mapbase / membase
- *
- * mapbase is the physical address of the IO port.
- * membase is an 'ioremapped' cookie.
- */
-
-#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/tty.h>
-#include <linux/ratelimit.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/nmi.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include "8250.h"
-
-#ifdef CONFIG_SPARC
-#include "suncore.h"
-#endif
-
-/*
- * Configuration:
- * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option
- * is unsafe when used on edge-triggered interrupts.
- */
-static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
-
-static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
-
-static struct uart_driver serial8250_reg;
-
-static int serial_index(struct uart_port *port)
-{
- return (serial8250_reg.minor - 64) + port->line;
-}
-
-static unsigned int skip_txen_test; /* force skip of txen test at init time */
-
-/*
- * Debugging.
- */
-#if 0
-#define DEBUG_AUTOCONF(fmt...) printk(fmt)
-#else
-#define DEBUG_AUTOCONF(fmt...) do { } while (0)
-#endif
-
-#if 0
-#define DEBUG_INTR(fmt...) printk(fmt)
-#else
-#define DEBUG_INTR(fmt...) do { } while (0)
-#endif
-
-#define PASS_LIMIT 512
-
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
-
-/*
- * We default to IRQ0 for the "no irq" hack. Some
- * machine types want others as well - they're free
- * to redefine this in their header file.
- */
-#define is_real_interrupt(irq) ((irq) != 0)
-
-#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define CONFIG_SERIAL_DETECT_IRQ 1
-#endif
-#ifdef CONFIG_SERIAL_8250_MANY_PORTS
-#define CONFIG_SERIAL_MANY_PORTS 1
-#endif
-
-/*
- * HUB6 is always on. This will be removed once the header
- * files have been cleaned.
- */
-#define CONFIG_HUB6 1
-
-#include <asm/serial.h>
-/*
- * SERIAL_PORT_DFNS tells us about built-in ports that have no
- * standard enumeration mechanism. Platforms that can find all
- * serial ports via mechanisms like ACPI or PCI need not supply it.
- */
-#ifndef SERIAL_PORT_DFNS
-#define SERIAL_PORT_DFNS
-#endif
-
-static const struct old_serial_port old_serial_port[] = {
- SERIAL_PORT_DFNS /* defined in asm/serial.h */
-};
-
-#define UART_NR CONFIG_SERIAL_8250_NR_UARTS
-
-#ifdef CONFIG_SERIAL_8250_RSA
-
-#define PORT_RSA_MAX 4
-static unsigned long probe_rsa[PORT_RSA_MAX];
-static unsigned int probe_rsa_count;
-#endif /* CONFIG_SERIAL_8250_RSA */
-
-struct irq_info {
- struct hlist_node node;
- int irq;
- spinlock_t lock; /* Protects list not the hash */
- struct list_head *head;
-};
-
-#define NR_IRQ_HASH 32 /* Can be adjusted later */
-static struct hlist_head irq_lists[NR_IRQ_HASH];
-static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */
-
-/*
- * Here we define the default xmit fifo size used for each type of UART.
- */
-static const struct serial8250_config uart_config[] = {
- [PORT_UNKNOWN] = {
- .name = "unknown",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_8250] = {
- .name = "8250",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_16450] = {
- .name = "16450",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_16550] = {
- .name = "16550",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_16550A] = {
- .name = "16550A",
- .fifo_size = 16,
- .tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO,
- },
- [PORT_CIRRUS] = {
- .name = "Cirrus",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_16650] = {
- .name = "ST16650",
- .fifo_size = 1,
- .tx_loadsz = 1,
- .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
- },
- [PORT_16650V2] = {
- .name = "ST16650V2",
- .fifo_size = 32,
- .tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
- UART_FCR_T_TRIG_00,
- .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
- },
- [PORT_16750] = {
- .name = "TI16750",
- .fifo_size = 64,
- .tx_loadsz = 64,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
- UART_FCR7_64BYTE,
- .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE,
- },
- [PORT_STARTECH] = {
- .name = "Startech",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_16C950] = {
- .name = "16C950/954",
- .fifo_size = 128,
- .tx_loadsz = 128,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- /* UART_CAP_EFR breaks billionon CF bluetooth card. */
- .flags = UART_CAP_FIFO | UART_CAP_SLEEP,
- },
- [PORT_16654] = {
- .name = "ST16654",
- .fifo_size = 64,
- .tx_loadsz = 32,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
- UART_FCR_T_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
- },
- [PORT_16850] = {
- .name = "XR16850",
- .fifo_size = 128,
- .tx_loadsz = 128,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
- },
- [PORT_RSA] = {
- .name = "RSA",
- .fifo_size = 2048,
- .tx_loadsz = 2048,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11,
- .flags = UART_CAP_FIFO,
- },
- [PORT_NS16550A] = {
- .name = "NS16550A",
- .fifo_size = 16,
- .tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_NATSEMI,
- },
- [PORT_XSCALE] = {
- .name = "XScale",
- .fifo_size = 32,
- .tx_loadsz = 32,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_UUE | UART_CAP_RTOIE,
- },
- [PORT_RM9000] = {
- .name = "RM9000",
- .fifo_size = 16,
- .tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO,
- },
- [PORT_OCTEON] = {
- .name = "OCTEON",
- .fifo_size = 64,
- .tx_loadsz = 64,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO,
- },
- [PORT_AR7] = {
- .name = "AR7",
- .fifo_size = 16,
- .tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
- .flags = UART_CAP_FIFO | UART_CAP_AFE,
- },
- [PORT_U6_16550A] = {
- .name = "U6_16550A",
- .fifo_size = 64,
- .tx_loadsz = 64,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_AFE,
- },
- [PORT_TEGRA] = {
- .name = "Tegra",
- .fifo_size = 32,
- .tx_loadsz = 8,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
- UART_FCR_T_TRIG_01,
- .flags = UART_CAP_FIFO | UART_CAP_RTOIE,
- },
- [PORT_XR17D15X] = {
- .name = "XR17D15X",
- .fifo_size = 64,
- .tx_loadsz = 64,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR,
- },
-};
-
-#if defined(CONFIG_MIPS_ALCHEMY)
-
-/* Au1x00 UART hardware has a weird register layout */
-static const u8 au_io_in_map[] = {
- [UART_RX] = 0,
- [UART_IER] = 2,
- [UART_IIR] = 3,
- [UART_LCR] = 5,
- [UART_MCR] = 6,
- [UART_LSR] = 7,
- [UART_MSR] = 8,
-};
-
-static const u8 au_io_out_map[] = {
- [UART_TX] = 1,
- [UART_IER] = 2,
- [UART_FCR] = 4,
- [UART_LCR] = 5,
- [UART_MCR] = 6,
-};
-
-/* sane hardware needs no mapping */
-static inline int map_8250_in_reg(struct uart_port *p, int offset)
-{
- if (p->iotype != UPIO_AU)
- return offset;
- return au_io_in_map[offset];
-}
-
-static inline int map_8250_out_reg(struct uart_port *p, int offset)
-{
- if (p->iotype != UPIO_AU)
- return offset;
- return au_io_out_map[offset];
-}
-
-#elif defined(CONFIG_SERIAL_8250_RM9K)
-
-static const u8
- regmap_in[8] = {
- [UART_RX] = 0x00,
- [UART_IER] = 0x0c,
- [UART_IIR] = 0x14,
- [UART_LCR] = 0x1c,
- [UART_MCR] = 0x20,
- [UART_LSR] = 0x24,
- [UART_MSR] = 0x28,
- [UART_SCR] = 0x2c
- },
- regmap_out[8] = {
- [UART_TX] = 0x04,
- [UART_IER] = 0x0c,
- [UART_FCR] = 0x18,
- [UART_LCR] = 0x1c,
- [UART_MCR] = 0x20,
- [UART_LSR] = 0x24,
- [UART_MSR] = 0x28,
- [UART_SCR] = 0x2c
- };
-
-static inline int map_8250_in_reg(struct uart_port *p, int offset)
-{
- if (p->iotype != UPIO_RM9000)
- return offset;
- return regmap_in[offset];
-}
-
-static inline int map_8250_out_reg(struct uart_port *p, int offset)
-{
- if (p->iotype != UPIO_RM9000)
- return offset;
- return regmap_out[offset];
-}
-
-#else
-
-/* sane hardware needs no mapping */
-#define map_8250_in_reg(up, offset) (offset)
-#define map_8250_out_reg(up, offset) (offset)
-
-#endif
-
-static unsigned int hub6_serial_in(struct uart_port *p, int offset)
-{
- offset = map_8250_in_reg(p, offset) << p->regshift;
- outb(p->hub6 - 1 + offset, p->iobase);
- return inb(p->iobase + 1);
-}
-
-static void hub6_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = map_8250_out_reg(p, offset) << p->regshift;
- outb(p->hub6 - 1 + offset, p->iobase);
- outb(value, p->iobase + 1);
-}
-
-static unsigned int mem_serial_in(struct uart_port *p, int offset)
-{
- offset = map_8250_in_reg(p, offset) << p->regshift;
- return readb(p->membase + offset);
-}
-
-static void mem_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = map_8250_out_reg(p, offset) << p->regshift;
- writeb(value, p->membase + offset);
-}
-
-static void mem32_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = map_8250_out_reg(p, offset) << p->regshift;
- writel(value, p->membase + offset);
-}
-
-static unsigned int mem32_serial_in(struct uart_port *p, int offset)
-{
- offset = map_8250_in_reg(p, offset) << p->regshift;
- return readl(p->membase + offset);
-}
-
-static unsigned int au_serial_in(struct uart_port *p, int offset)
-{
- offset = map_8250_in_reg(p, offset) << p->regshift;
- return __raw_readl(p->membase + offset);
-}
-
-static void au_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = map_8250_out_reg(p, offset) << p->regshift;
- __raw_writel(value, p->membase + offset);
-}
-
-static unsigned int io_serial_in(struct uart_port *p, int offset)
-{
- offset = map_8250_in_reg(p, offset) << p->regshift;
- return inb(p->iobase + offset);
-}
-
-static void io_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = map_8250_out_reg(p, offset) << p->regshift;
- outb(value, p->iobase + offset);
-}
-
-static int serial8250_default_handle_irq(struct uart_port *port);
-
-static void set_io_from_upio(struct uart_port *p)
-{
- struct uart_8250_port *up =
- container_of(p, struct uart_8250_port, port);
- switch (p->iotype) {
- case UPIO_HUB6:
- p->serial_in = hub6_serial_in;
- p->serial_out = hub6_serial_out;
- break;
-
- case UPIO_MEM:
- p->serial_in = mem_serial_in;
- p->serial_out = mem_serial_out;
- break;
-
- case UPIO_RM9000:
- case UPIO_MEM32:
- p->serial_in = mem32_serial_in;
- p->serial_out = mem32_serial_out;
- break;
-
- case UPIO_AU:
- p->serial_in = au_serial_in;
- p->serial_out = au_serial_out;
- break;
-
- default:
- p->serial_in = io_serial_in;
- p->serial_out = io_serial_out;
- break;
- }
- /* Remember loaded iotype */
- up->cur_iotype = p->iotype;
- p->handle_irq = serial8250_default_handle_irq;
-}
-
-static void
-serial_out_sync(struct uart_8250_port *up, int offset, int value)
-{
- struct uart_port *p = &up->port;
- switch (p->iotype) {
- case UPIO_MEM:
- case UPIO_MEM32:
- case UPIO_AU:
- p->serial_out(p, offset, value);
- p->serial_in(p, UART_LCR); /* safe, no side-effects */
- break;
- default:
- p->serial_out(p, offset, value);
- }
-}
-
-#define serial_in(up, offset) \
- (up->port.serial_in(&(up)->port, (offset)))
-#define serial_out(up, offset, value) \
- (up->port.serial_out(&(up)->port, (offset), (value)))
-/*
- * We used to support using pause I/O for certain machines. We
- * haven't supported this for a while, but just in case it's badly
- * needed for certain old 386 machines, I've left these #define's
- * in....
- */
-#define serial_inp(up, offset) serial_in(up, offset)
-#define serial_outp(up, offset, value) serial_out(up, offset, value)
-
-/* Uart divisor latch read */
-static inline int _serial_dl_read(struct uart_8250_port *up)
-{
- return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8;
-}
-
-/* Uart divisor latch write */
-static inline void _serial_dl_write(struct uart_8250_port *up, int value)
-{
- serial_outp(up, UART_DLL, value & 0xff);
- serial_outp(up, UART_DLM, value >> 8 & 0xff);
-}
-
-#if defined(CONFIG_MIPS_ALCHEMY)
-/* Au1x00 haven't got a standard divisor latch */
-static int serial_dl_read(struct uart_8250_port *up)
-{
- if (up->port.iotype == UPIO_AU)
- return __raw_readl(up->port.membase + 0x28);
- else
- return _serial_dl_read(up);
-}
-
-static void serial_dl_write(struct uart_8250_port *up, int value)
-{
- if (up->port.iotype == UPIO_AU)
- __raw_writel(value, up->port.membase + 0x28);
- else
- _serial_dl_write(up, value);
-}
-#elif defined(CONFIG_SERIAL_8250_RM9K)
-static int serial_dl_read(struct uart_8250_port *up)
-{
- return (up->port.iotype == UPIO_RM9000) ?
- (((__raw_readl(up->port.membase + 0x10) << 8) |
- (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff) :
- _serial_dl_read(up);
-}
-
-static void serial_dl_write(struct uart_8250_port *up, int value)
-{
- if (up->port.iotype == UPIO_RM9000) {
- __raw_writel(value, up->port.membase + 0x08);
- __raw_writel(value >> 8, up->port.membase + 0x10);
- } else {
- _serial_dl_write(up, value);
- }
-}
-#else
-#define serial_dl_read(up) _serial_dl_read(up)
-#define serial_dl_write(up, value) _serial_dl_write(up, value)
-#endif
-
-/*
- * For the 16C950
- */
-static void serial_icr_write(struct uart_8250_port *up, int offset, int value)
-{
- serial_out(up, UART_SCR, offset);
- serial_out(up, UART_ICR, value);
-}
-
-static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
-{
- unsigned int value;
-
- serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
- serial_out(up, UART_SCR, offset);
- value = serial_in(up, UART_ICR);
- serial_icr_write(up, UART_ACR, up->acr);
-
- return value;
-}
-
-/*
- * FIFO support.
- */
-static void serial8250_clear_fifos(struct uart_8250_port *p)
-{
- if (p->capabilities & UART_CAP_FIFO) {
- serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO);
- serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO |
- UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
- serial_outp(p, UART_FCR, 0);
- }
-}
-
-/*
- * IER sleep support. UARTs which have EFRs need the "extended
- * capability" bit enabled. Note that on XR16C850s, we need to
- * reset LCR to write to IER.
- */
-static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
-{
- if (p->capabilities & UART_CAP_SLEEP) {
- if (p->capabilities & UART_CAP_EFR) {
- serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_outp(p, UART_EFR, UART_EFR_ECB);
- serial_outp(p, UART_LCR, 0);
- }
- serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0);
- if (p->capabilities & UART_CAP_EFR) {
- serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_outp(p, UART_EFR, 0);
- serial_outp(p, UART_LCR, 0);
- }
- }
-}
-
-#ifdef CONFIG_SERIAL_8250_RSA
-/*
- * Attempts to turn on the RSA FIFO. Returns zero on failure.
- * We set the port uart clock rate if we succeed.
- */
-static int __enable_rsa(struct uart_8250_port *up)
-{
- unsigned char mode;
- int result;
-
- mode = serial_inp(up, UART_RSA_MSR);
- result = mode & UART_RSA_MSR_FIFO;
-
- if (!result) {
- serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
- mode = serial_inp(up, UART_RSA_MSR);
- result = mode & UART_RSA_MSR_FIFO;
- }
-
- if (result)
- up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
-
- return result;
-}
-
-static void enable_rsa(struct uart_8250_port *up)
-{
- if (up->port.type == PORT_RSA) {
- if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
- spin_lock_irq(&up->port.lock);
- __enable_rsa(up);
- spin_unlock_irq(&up->port.lock);
- }
- if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
- serial_outp(up, UART_RSA_FRR, 0);
- }
-}
-
-/*
- * Attempts to turn off the RSA FIFO. Returns zero on failure.
- * It is unknown why interrupts were disabled in here. However,
- * the caller is expected to preserve this behaviour by grabbing
- * the spinlock before calling this function.
- */
-static void disable_rsa(struct uart_8250_port *up)
-{
- unsigned char mode;
- int result;
-
- if (up->port.type == PORT_RSA &&
- up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
- spin_lock_irq(&up->port.lock);
-
- mode = serial_inp(up, UART_RSA_MSR);
- result = !(mode & UART_RSA_MSR_FIFO);
-
- if (!result) {
- serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
- mode = serial_inp(up, UART_RSA_MSR);
- result = !(mode & UART_RSA_MSR_FIFO);
- }
-
- if (result)
- up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
- spin_unlock_irq(&up->port.lock);
- }
-}
-#endif /* CONFIG_SERIAL_8250_RSA */
-
-/*
- * This is a quickie test to see how big the FIFO is.
- * It doesn't work at all the time, more's the pity.
- */
-static int size_fifo(struct uart_8250_port *up)
-{
- unsigned char old_fcr, old_mcr, old_lcr;
- unsigned short old_dl;
- int count;
-
- old_lcr = serial_inp(up, UART_LCR);
- serial_outp(up, UART_LCR, 0);
- old_fcr = serial_inp(up, UART_FCR);
- old_mcr = serial_inp(up, UART_MCR);
- serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
- UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
- serial_outp(up, UART_MCR, UART_MCR_LOOP);
- serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A);
- old_dl = serial_dl_read(up);
- serial_dl_write(up, 0x0001);
- serial_outp(up, UART_LCR, 0x03);
- for (count = 0; count < 256; count++)
- serial_outp(up, UART_TX, count);
- mdelay(20);/* FIXME - schedule_timeout */
- for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) &&
- (count < 256); count++)
- serial_inp(up, UART_RX);
- serial_outp(up, UART_FCR, old_fcr);
- serial_outp(up, UART_MCR, old_mcr);
- serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A);
- serial_dl_write(up, old_dl);
- serial_outp(up, UART_LCR, old_lcr);
-
- return count;
-}
-
-/*
- * Read UART ID using the divisor method - set DLL and DLM to zero
- * and the revision will be in DLL and device type in DLM. We
- * preserve the device state across this.
- */
-static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
-{
- unsigned char old_dll, old_dlm, old_lcr;
- unsigned int id;
-
- old_lcr = serial_inp(p, UART_LCR);
- serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_A);
-
- old_dll = serial_inp(p, UART_DLL);
- old_dlm = serial_inp(p, UART_DLM);
-
- serial_outp(p, UART_DLL, 0);
- serial_outp(p, UART_DLM, 0);
-
- id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
-
- serial_outp(p, UART_DLL, old_dll);
- serial_outp(p, UART_DLM, old_dlm);
- serial_outp(p, UART_LCR, old_lcr);
-
- return id;
-}
-
-/*
- * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's.
- * When this function is called we know it is at least a StarTech
- * 16650 V2, but it might be one of several StarTech UARTs, or one of
- * its clones. (We treat the broken original StarTech 16650 V1 as a
- * 16550, and why not? Startech doesn't seem to even acknowledge its
- * existence.)
- *
- * What evil have men's minds wrought...
- */
-static void autoconfig_has_efr(struct uart_8250_port *up)
-{
- unsigned int id1, id2, id3, rev;
-
- /*
- * Everything with an EFR has SLEEP
- */
- up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
-
- /*
- * First we check to see if it's an Oxford Semiconductor UART.
- *
- * If we have to do this here because some non-National
- * Semiconductor clone chips lock up if you try writing to the
- * LSR register (which serial_icr_read does)
- */
-
- /*
- * Check for Oxford Semiconductor 16C950.
- *
- * EFR [4] must be set else this test fails.
- *
- * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca)
- * claims that it's needed for 952 dual UART's (which are not
- * recommended for new designs).
- */
- up->acr = 0;
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_out(up, UART_EFR, UART_EFR_ECB);
- serial_out(up, UART_LCR, 0x00);
- id1 = serial_icr_read(up, UART_ID1);
- id2 = serial_icr_read(up, UART_ID2);
- id3 = serial_icr_read(up, UART_ID3);
- rev = serial_icr_read(up, UART_REV);
-
- DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev);
-
- if (id1 == 0x16 && id2 == 0xC9 &&
- (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) {
- up->port.type = PORT_16C950;
-
- /*
- * Enable work around for the Oxford Semiconductor 952 rev B
- * chip which causes it to seriously miscalculate baud rates
- * when DLL is 0.
- */
- if (id3 == 0x52 && rev == 0x01)
- up->bugs |= UART_BUG_QUOT;
- return;
- }
-
- /*
- * We check for a XR16C850 by setting DLL and DLM to 0, and then
- * reading back DLL and DLM. The chip type depends on the DLM
- * value read back:
- * 0x10 - XR16C850 and the DLL contains the chip revision.
- * 0x12 - XR16C2850.
- * 0x14 - XR16C854.
- */
- id1 = autoconfig_read_divisor_id(up);
- DEBUG_AUTOCONF("850id=%04x ", id1);
-
- id2 = id1 >> 8;
- if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) {
- up->port.type = PORT_16850;
- return;
- }
-
- /*
- * It wasn't an XR16C850.
- *
- * We distinguish between the '654 and the '650 by counting
- * how many bytes are in the FIFO. I'm using this for now,
- * since that's the technique that was sent to me in the
- * serial driver update, but I'm not convinced this works.
- * I've had problems doing this in the past. -TYT
- */
- if (size_fifo(up) == 64)
- up->port.type = PORT_16654;
- else
- up->port.type = PORT_16650V2;
-}
-
-/*
- * We detected a chip without a FIFO. Only two fall into
- * this category - the original 8250 and the 16450. The
- * 16450 has a scratch register (accessible with LCR=0)
- */
-static void autoconfig_8250(struct uart_8250_port *up)
-{
- unsigned char scratch, status1, status2;
-
- up->port.type = PORT_8250;
-
- scratch = serial_in(up, UART_SCR);
- serial_outp(up, UART_SCR, 0xa5);
- status1 = serial_in(up, UART_SCR);
- serial_outp(up, UART_SCR, 0x5a);
- status2 = serial_in(up, UART_SCR);
- serial_outp(up, UART_SCR, scratch);
-
- if (status1 == 0xa5 && status2 == 0x5a)
- up->port.type = PORT_16450;
-}
-
-static int broken_efr(struct uart_8250_port *up)
-{
- /*
- * Exar ST16C2550 "A2" devices incorrectly detect as
- * having an EFR, and report an ID of 0x0201. See
- * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
- */
- if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
- return 1;
-
- return 0;
-}
-
-static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
-{
- unsigned char status;
-
- status = serial_in(up, 0x04); /* EXCR2 */
-#define PRESL(x) ((x) & 0x30)
- if (PRESL(status) == 0x10) {
- /* already in high speed mode */
- return 0;
- } else {
- status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
- status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
- serial_outp(up, 0x04, status);
- }
- return 1;
-}
-
-/*
- * We know that the chip has FIFOs. Does it have an EFR? The
- * EFR is located in the same register position as the IIR and
- * we know the top two bits of the IIR are currently set. The
- * EFR should contain zero. Try to read the EFR.
- */
-static void autoconfig_16550a(struct uart_8250_port *up)
-{
- unsigned char status1, status2;
- unsigned int iersave;
-
- up->port.type = PORT_16550A;
- up->capabilities |= UART_CAP_FIFO;
-
- /*
- * Check for presence of the EFR when DLAB is set.
- * Only ST16C650V1 UARTs pass this test.
- */
- serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A);
- if (serial_in(up, UART_EFR) == 0) {
- serial_outp(up, UART_EFR, 0xA8);
- if (serial_in(up, UART_EFR) != 0) {
- DEBUG_AUTOCONF("EFRv1 ");
- up->port.type = PORT_16650;
- up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
- } else {
- DEBUG_AUTOCONF("Motorola 8xxx DUART ");
- }
- serial_outp(up, UART_EFR, 0);
- return;
- }
-
- /*
- * Maybe it requires 0xbf to be written to the LCR.
- * (other ST16C650V2 UARTs, TI16C752A, etc)
- */
- serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
- if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) {
- DEBUG_AUTOCONF("EFRv2 ");
- autoconfig_has_efr(up);
- return;
- }
-
- /*
- * Check for a National Semiconductor SuperIO chip.
- * Attempt to switch to bank 2, read the value of the LOOP bit
- * from EXCR1. Switch back to bank 0, change it in MCR. Then
- * switch back to bank 2, read it from EXCR1 again and check
- * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2
- */
- serial_outp(up, UART_LCR, 0);
- status1 = serial_in(up, UART_MCR);
- serial_outp(up, UART_LCR, 0xE0);
- status2 = serial_in(up, 0x02); /* EXCR1 */
-
- if (!((status2 ^ status1) & UART_MCR_LOOP)) {
- serial_outp(up, UART_LCR, 0);
- serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP);
- serial_outp(up, UART_LCR, 0xE0);
- status2 = serial_in(up, 0x02); /* EXCR1 */
- serial_outp(up, UART_LCR, 0);
- serial_outp(up, UART_MCR, status1);
-
- if ((status2 ^ status1) & UART_MCR_LOOP) {
- unsigned short quot;
-
- serial_outp(up, UART_LCR, 0xE0);
-
- quot = serial_dl_read(up);
- quot <<= 3;
-
- if (ns16550a_goto_highspeed(up))
- serial_dl_write(up, quot);
-
- serial_outp(up, UART_LCR, 0);
-
- up->port.uartclk = 921600*16;
- up->port.type = PORT_NS16550A;
- up->capabilities |= UART_NATSEMI;
- return;
- }
- }
-
- /*
- * No EFR. Try to detect a TI16750, which only sets bit 5 of
- * the IIR when 64 byte FIFO mode is enabled when DLAB is set.
- * Try setting it with and without DLAB set. Cheap clones
- * set bit 5 without DLAB set.
- */
- serial_outp(up, UART_LCR, 0);
- serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
- status1 = serial_in(up, UART_IIR) >> 5;
- serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
- serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A);
- serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
- status2 = serial_in(up, UART_IIR) >> 5;
- serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
- serial_outp(up, UART_LCR, 0);
-
- DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2);
-
- if (status1 == 6 && status2 == 7) {
- up->port.type = PORT_16750;
- up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP;
- return;
- }
-
- /*
- * Try writing and reading the UART_IER_UUE bit (b6).
- * If it works, this is probably one of the Xscale platform's
- * internal UARTs.
- * We're going to explicitly set the UUE bit to 0 before
- * trying to write and read a 1 just to make sure it's not
- * already a 1 and maybe locked there before we even start start.
- */
- iersave = serial_in(up, UART_IER);
- serial_outp(up, UART_IER, iersave & ~UART_IER_UUE);
- if (!(serial_in(up, UART_IER) & UART_IER_UUE)) {
- /*
- * OK it's in a known zero state, try writing and reading
- * without disturbing the current state of the other bits.
- */
- serial_outp(up, UART_IER, iersave | UART_IER_UUE);
- if (serial_in(up, UART_IER) & UART_IER_UUE) {
- /*
- * It's an Xscale.
- * We'll leave the UART_IER_UUE bit set to 1 (enabled).
- */
- DEBUG_AUTOCONF("Xscale ");
- up->port.type = PORT_XSCALE;
- up->capabilities |= UART_CAP_UUE | UART_CAP_RTOIE;
- return;
- }
- } else {
- /*
- * If we got here we couldn't force the IER_UUE bit to 0.
- * Log it and continue.
- */
- DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
- }
- serial_outp(up, UART_IER, iersave);
-
- /*
- * Exar uarts have EFR in a weird location
- */
- if (up->port.flags & UPF_EXAR_EFR) {
- up->port.type = PORT_XR17D15X;
- up->capabilities |= UART_CAP_AFE | UART_CAP_EFR;
- }
-
- /*
- * We distinguish between 16550A and U6 16550A by counting
- * how many bytes are in the FIFO.
- */
- if (up->port.type == PORT_16550A && size_fifo(up) == 64) {
- up->port.type = PORT_U6_16550A;
- up->capabilities |= UART_CAP_AFE;
- }
-}
-
-/*
- * This routine is called by rs_init() to initialize a specific serial
- * port. It determines what type of UART chip this serial port is
- * using: 8250, 16450, 16550, 16550A. The important question is
- * whether or not this UART is a 16550A or not, since this will
- * determine whether or not we can use its FIFO features or not.
- */
-static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
-{
- unsigned char status1, scratch, scratch2, scratch3;
- unsigned char save_lcr, save_mcr;
- unsigned long flags;
-
- if (!up->port.iobase && !up->port.mapbase && !up->port.membase)
- return;
-
- DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ",
- serial_index(&up->port), up->port.iobase, up->port.membase);
-
- /*
- * We really do need global IRQs disabled here - we're going to
- * be frobbing the chips IRQ enable register to see if it exists.
- */
- spin_lock_irqsave(&up->port.lock, flags);
-
- up->capabilities = 0;
- up->bugs = 0;
-
- if (!(up->port.flags & UPF_BUGGY_UART)) {
- /*
- * Do a simple existence test first; if we fail this,
- * there's no point trying anything else.
- *
- * 0x80 is used as a nonsense port to prevent against
- * false positives due to ISA bus float. The
- * assumption is that 0x80 is a non-existent port;
- * which should be safe since include/asm/io.h also
- * makes this assumption.
- *
- * Note: this is safe as long as MCR bit 4 is clear
- * and the device is in "PC" mode.
- */
- scratch = serial_inp(up, UART_IER);
- serial_outp(up, UART_IER, 0);
-#ifdef __i386__
- outb(0xff, 0x080);
-#endif
- /*
- * Mask out IER[7:4] bits for test as some UARTs (e.g. TL
- * 16C754B) allow only to modify them if an EFR bit is set.
- */
- scratch2 = serial_inp(up, UART_IER) & 0x0f;
- serial_outp(up, UART_IER, 0x0F);
-#ifdef __i386__
- outb(0, 0x080);
-#endif
- scratch3 = serial_inp(up, UART_IER) & 0x0f;
- serial_outp(up, UART_IER, scratch);
- if (scratch2 != 0 || scratch3 != 0x0F) {
- /*
- * We failed; there's nothing here
- */
- DEBUG_AUTOCONF("IER test failed (%02x, %02x) ",
- scratch2, scratch3);
- goto out;
- }
- }
-
- save_mcr = serial_in(up, UART_MCR);
- save_lcr = serial_in(up, UART_LCR);
-
- /*
- * Check to see if a UART is really there. Certain broken
- * internal modems based on the Rockwell chipset fail this
- * test, because they apparently don't implement the loopback
- * test mode. So this test is skipped on the COM 1 through
- * COM 4 ports. This *should* be safe, since no board
- * manufacturer would be stupid enough to design a board
- * that conflicts with COM 1-4 --- we hope!
- */
- if (!(up->port.flags & UPF_SKIP_TEST)) {
- serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
- status1 = serial_inp(up, UART_MSR) & 0xF0;
- serial_outp(up, UART_MCR, save_mcr);
- if (status1 != 0x90) {
- DEBUG_AUTOCONF("LOOP test failed (%02x) ",
- status1);
- goto out;
- }
- }
-
- /*
- * We're pretty sure there's a port here. Lets find out what
- * type of port it is. The IIR top two bits allows us to find
- * out if it's 8250 or 16450, 16550, 16550A or later. This
- * determines what we test for next.
- *
- * We also initialise the EFR (if any) to zero for later. The
- * EFR occupies the same register location as the FCR and IIR.
- */
- serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_outp(up, UART_EFR, 0);
- serial_outp(up, UART_LCR, 0);
-
- serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
- scratch = serial_in(up, UART_IIR) >> 6;
-
- DEBUG_AUTOCONF("iir=%d ", scratch);
-
- switch (scratch) {
- case 0:
- autoconfig_8250(up);
- break;
- case 1:
- up->port.type = PORT_UNKNOWN;
- break;
- case 2:
- up->port.type = PORT_16550;
- break;
- case 3:
- autoconfig_16550a(up);
- break;
- }
-
-#ifdef CONFIG_SERIAL_8250_RSA
- /*
- * Only probe for RSA ports if we got the region.
- */
- if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) {
- int i;
-
- for (i = 0 ; i < probe_rsa_count; ++i) {
- if (probe_rsa[i] == up->port.iobase &&
- __enable_rsa(up)) {
- up->port.type = PORT_RSA;
- break;
- }
- }
- }
-#endif
-
- serial_outp(up, UART_LCR, save_lcr);
-
- if (up->capabilities != uart_config[up->port.type].flags) {
- printk(KERN_WARNING
- "ttyS%d: detected caps %08x should be %08x\n",
- serial_index(&up->port), up->capabilities,
- uart_config[up->port.type].flags);
- }
-
- up->port.fifosize = uart_config[up->port.type].fifo_size;
- up->capabilities = uart_config[up->port.type].flags;
- up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
-
- if (up->port.type == PORT_UNKNOWN)
- goto out;
-
- /*
- * Reset the UART.
- */
-#ifdef CONFIG_SERIAL_8250_RSA
- if (up->port.type == PORT_RSA)
- serial_outp(up, UART_RSA_FRR, 0);
-#endif
- serial_outp(up, UART_MCR, save_mcr);
- serial8250_clear_fifos(up);
- serial_in(up, UART_RX);
- if (up->capabilities & UART_CAP_UUE)
- serial_outp(up, UART_IER, UART_IER_UUE);
- else
- serial_outp(up, UART_IER, 0);
-
- out:
- spin_unlock_irqrestore(&up->port.lock, flags);
- DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name);
-}
-
-static void autoconfig_irq(struct uart_8250_port *up)
-{
- unsigned char save_mcr, save_ier;
- unsigned char save_ICP = 0;
- unsigned int ICP = 0;
- unsigned long irqs;
- int irq;
-
- if (up->port.flags & UPF_FOURPORT) {
- ICP = (up->port.iobase & 0xfe0) | 0x1f;
- save_ICP = inb_p(ICP);
- outb_p(0x80, ICP);
- (void) inb_p(ICP);
- }
-
- /* forget possible initially masked and pending IRQ */
- probe_irq_off(probe_irq_on());
- save_mcr = serial_inp(up, UART_MCR);
- save_ier = serial_inp(up, UART_IER);
- serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
-
- irqs = probe_irq_on();
- serial_outp(up, UART_MCR, 0);
- udelay(10);
- if (up->port.flags & UPF_FOURPORT) {
- serial_outp(up, UART_MCR,
- UART_MCR_DTR | UART_MCR_RTS);
- } else {
- serial_outp(up, UART_MCR,
- UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
- }
- serial_outp(up, UART_IER, 0x0f); /* enable all intrs */
- (void)serial_inp(up, UART_LSR);
- (void)serial_inp(up, UART_RX);
- (void)serial_inp(up, UART_IIR);
- (void)serial_inp(up, UART_MSR);
- serial_outp(up, UART_TX, 0xFF);
- udelay(20);
- irq = probe_irq_off(irqs);
-
- serial_outp(up, UART_MCR, save_mcr);
- serial_outp(up, UART_IER, save_ier);
-
- if (up->port.flags & UPF_FOURPORT)
- outb_p(save_ICP, ICP);
-
- up->port.irq = (irq > 0) ? irq : 0;
-}
-
-static inline void __stop_tx(struct uart_8250_port *p)
-{
- if (p->ier & UART_IER_THRI) {
- p->ier &= ~UART_IER_THRI;
- serial_out(p, UART_IER, p->ier);
- }
-}
-
-static void serial8250_stop_tx(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- __stop_tx(up);
-
- /*
- * We really want to stop the transmitter from sending.
- */
- if (up->port.type == PORT_16C950) {
- up->acr |= UART_ACR_TXDIS;
- serial_icr_write(up, UART_ACR, up->acr);
- }
-}
-
-static void serial8250_start_tx(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- if (!(up->ier & UART_IER_THRI)) {
- up->ier |= UART_IER_THRI;
- serial_out(up, UART_IER, up->ier);
-
- if (up->bugs & UART_BUG_TXEN) {
- unsigned char lsr;
- lsr = serial_in(up, UART_LSR);
- up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
- if ((up->port.type == PORT_RM9000) ?
- (lsr & UART_LSR_THRE) :
- (lsr & UART_LSR_TEMT))
- serial8250_tx_chars(up);
- }
- }
-
- /*
- * Re-enable the transmitter if we disabled it.
- */
- if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
- up->acr &= ~UART_ACR_TXDIS;
- serial_icr_write(up, UART_ACR, up->acr);
- }
-}
-
-static void serial8250_stop_rx(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- up->ier &= ~UART_IER_RLSI;
- up->port.read_status_mask &= ~UART_LSR_DR;
- serial_out(up, UART_IER, up->ier);
-}
-
-static void serial8250_enable_ms(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- /* no MSR capabilities */
- if (up->bugs & UART_BUG_NOMSR)
- return;
-
- up->ier |= UART_IER_MSI;
- serial_out(up, UART_IER, up->ier);
-}
-
-/*
- * Clear the Tegra rx fifo after a break
- *
- * FIXME: This needs to become a port specific callback once we have a
- * framework for this
- */
-static void clear_rx_fifo(struct uart_8250_port *up)
-{
- unsigned int status, tmout = 10000;
- do {
- status = serial_in(up, UART_LSR);
- if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))
- status = serial_in(up, UART_RX);
- else
- break;
- if (--tmout == 0)
- break;
- udelay(1);
- } while (1);
-}
-
-/*
- * serial8250_rx_chars: processes according to the passed in LSR
- * value, and returns the remaining LSR bits not handled
- * by this Rx routine.
- */
-unsigned char
-serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
-{
- struct tty_struct *tty = up->port.state->port.tty;
- unsigned char ch;
- int max_count = 256;
- char flag;
-
- do {
- if (likely(lsr & UART_LSR_DR))
- ch = serial_inp(up, UART_RX);
- else
- /*
- * Intel 82571 has a Serial Over Lan device that will
- * set UART_LSR_BI without setting UART_LSR_DR when
- * it receives a break. To avoid reading from the
- * receive buffer without UART_LSR_DR bit set, we
- * just force the read character to be 0
- */
- ch = 0;
-
- flag = TTY_NORMAL;
- up->port.icount.rx++;
-
- lsr |= up->lsr_saved_flags;
- up->lsr_saved_flags = 0;
-
- if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
- /*
- * For statistics only
- */
- if (lsr & UART_LSR_BI) {
- lsr &= ~(UART_LSR_FE | UART_LSR_PE);
- up->port.icount.brk++;
- /*
- * If tegra port then clear the rx fifo to
- * accept another break/character.
- */
- if (up->port.type == PORT_TEGRA)
- clear_rx_fifo(up);
-
- /*
- * We do the SysRQ and SAK checking
- * here because otherwise the break
- * may get masked by ignore_status_mask
- * or read_status_mask.
- */
- if (uart_handle_break(&up->port))
- goto ignore_char;
- } else if (lsr & UART_LSR_PE)
- up->port.icount.parity++;
- else if (lsr & UART_LSR_FE)
- up->port.icount.frame++;
- if (lsr & UART_LSR_OE)
- up->port.icount.overrun++;
-
- /*
- * Mask off conditions which should be ignored.
- */
- lsr &= up->port.read_status_mask;
-
- if (lsr & UART_LSR_BI) {
- DEBUG_INTR("handling break....");
- flag = TTY_BREAK;
- } else if (lsr & UART_LSR_PE)
- flag = TTY_PARITY;
- else if (lsr & UART_LSR_FE)
- flag = TTY_FRAME;
- }
- if (uart_handle_sysrq_char(&up->port, ch))
- goto ignore_char;
-
- uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
-
-ignore_char:
- lsr = serial_inp(up, UART_LSR);
- } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0));
- spin_unlock(&up->port.lock);
- tty_flip_buffer_push(tty);
- spin_lock(&up->port.lock);
- return lsr;
-}
-EXPORT_SYMBOL_GPL(serial8250_rx_chars);
-
-void serial8250_tx_chars(struct uart_8250_port *up)
-{
- struct circ_buf *xmit = &up->port.state->xmit;
- int count;
-
- if (up->port.x_char) {
- serial_outp(up, UART_TX, up->port.x_char);
- up->port.icount.tx++;
- up->port.x_char = 0;
- return;
- }
- if (uart_tx_stopped(&up->port)) {
- serial8250_stop_tx(&up->port);
- return;
- }
- if (uart_circ_empty(xmit)) {
- __stop_tx(up);
- return;
- }
-
- count = up->tx_loadsz;
- do {
- serial_out(up, UART_TX, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->port.icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&up->port);
-
- DEBUG_INTR("THRE...");
-
- if (uart_circ_empty(xmit))
- __stop_tx(up);
-}
-EXPORT_SYMBOL_GPL(serial8250_tx_chars);
-
-unsigned int serial8250_modem_status(struct uart_8250_port *up)
-{
- unsigned int status = serial_in(up, UART_MSR);
-
- status |= up->msr_saved_flags;
- up->msr_saved_flags = 0;
- if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
- up->port.state != NULL) {
- if (status & UART_MSR_TERI)
- up->port.icount.rng++;
- if (status & UART_MSR_DDSR)
- up->port.icount.dsr++;
- if (status & UART_MSR_DDCD)
- uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
- if (status & UART_MSR_DCTS)
- uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
-
- wake_up_interruptible(&up->port.state->port.delta_msr_wait);
- }
-
- return status;
-}
-EXPORT_SYMBOL_GPL(serial8250_modem_status);
-
-/*
- * This handles the interrupt from one port.
- */
-int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
-{
- unsigned char status;
- unsigned long flags;
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- if (iir & UART_IIR_NO_INT)
- return 0;
-
- spin_lock_irqsave(&up->port.lock, flags);
-
- status = serial_inp(up, UART_LSR);
-
- DEBUG_INTR("status = %x...", status);
-
- if (status & (UART_LSR_DR | UART_LSR_BI))
- status = serial8250_rx_chars(up, status);
- serial8250_modem_status(up);
- if (status & UART_LSR_THRE)
- serial8250_tx_chars(up);
-
- spin_unlock_irqrestore(&up->port.lock, flags);
- return 1;
-}
-EXPORT_SYMBOL_GPL(serial8250_handle_irq);
-
-static int serial8250_default_handle_irq(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- unsigned int iir = serial_in(up, UART_IIR);
-
- return serial8250_handle_irq(port, iir);
-}
-
-/*
- * This is the serial driver's interrupt routine.
- *
- * Arjan thinks the old way was overly complex, so it got simplified.
- * Alan disagrees, saying that need the complexity to handle the weird
- * nature of ISA shared interrupts. (This is a special exception.)
- *
- * In order to handle ISA shared interrupts properly, we need to check
- * that all ports have been serviced, and therefore the ISA interrupt
- * line has been de-asserted.
- *
- * This means we need to loop through all ports. checking that they
- * don't have an interrupt pending.
- */
-static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
-{
- struct irq_info *i = dev_id;
- struct list_head *l, *end = NULL;
- int pass_counter = 0, handled = 0;
-
- DEBUG_INTR("serial8250_interrupt(%d)...", irq);
-
- spin_lock(&i->lock);
-
- l = i->head;
- do {
- struct uart_8250_port *up;
- struct uart_port *port;
- bool skip;
-
- up = list_entry(l, struct uart_8250_port, list);
- port = &up->port;
- skip = pass_counter && up->port.flags & UPF_IIR_ONCE;
-
- if (!skip && port->handle_irq(port)) {
- handled = 1;
- end = NULL;
- } else if (end == NULL)
- end = l;
-
- l = l->next;
-
- if (l == i->head && pass_counter++ > PASS_LIMIT) {
- /* If we hit this, we're dead. */
- printk_ratelimited(KERN_ERR
- "serial8250: too much work for irq%d\n", irq);
- break;
- }
- } while (l != end);
-
- spin_unlock(&i->lock);
-
- DEBUG_INTR("end.\n");
-
- return IRQ_RETVAL(handled);
-}
-
-/*
- * To support ISA shared interrupts, we need to have one interrupt
- * handler that ensures that the IRQ line has been deasserted
- * before returning. Failing to do this will result in the IRQ
- * line being stuck active, and, since ISA irqs are edge triggered,
- * no more IRQs will be seen.
- */
-static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up)
-{
- spin_lock_irq(&i->lock);
-
- if (!list_empty(i->head)) {
- if (i->head == &up->list)
- i->head = i->head->next;
- list_del(&up->list);
- } else {
- BUG_ON(i->head != &up->list);
- i->head = NULL;
- }
- spin_unlock_irq(&i->lock);
- /* List empty so throw away the hash node */
- if (i->head == NULL) {
- hlist_del(&i->node);
- kfree(i);
- }
-}
-
-static int serial_link_irq_chain(struct uart_8250_port *up)
-{
- struct hlist_head *h;
- struct hlist_node *n;
- struct irq_info *i;
- int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
-
- mutex_lock(&hash_mutex);
-
- h = &irq_lists[up->port.irq % NR_IRQ_HASH];
-
- hlist_for_each(n, h) {
- i = hlist_entry(n, struct irq_info, node);
- if (i->irq == up->port.irq)
- break;
- }
-
- if (n == NULL) {
- i = kzalloc(sizeof(struct irq_info), GFP_KERNEL);
- if (i == NULL) {
- mutex_unlock(&hash_mutex);
- return -ENOMEM;
- }
- spin_lock_init(&i->lock);
- i->irq = up->port.irq;
- hlist_add_head(&i->node, h);
- }
- mutex_unlock(&hash_mutex);
-
- spin_lock_irq(&i->lock);
-
- if (i->head) {
- list_add(&up->list, i->head);
- spin_unlock_irq(&i->lock);
-
- ret = 0;
- } else {
- INIT_LIST_HEAD(&up->list);
- i->head = &up->list;
- spin_unlock_irq(&i->lock);
- irq_flags |= up->port.irqflags;
- ret = request_irq(up->port.irq, serial8250_interrupt,
- irq_flags, "serial", i);
- if (ret < 0)
- serial_do_unlink(i, up);
- }
-
- return ret;
-}
-
-static void serial_unlink_irq_chain(struct uart_8250_port *up)
-{
- struct irq_info *i;
- struct hlist_node *n;
- struct hlist_head *h;
-
- mutex_lock(&hash_mutex);
-
- h = &irq_lists[up->port.irq % NR_IRQ_HASH];
-
- hlist_for_each(n, h) {
- i = hlist_entry(n, struct irq_info, node);
- if (i->irq == up->port.irq)
- break;
- }
-
- BUG_ON(n == NULL);
- BUG_ON(i->head == NULL);
-
- if (list_empty(i->head))
- free_irq(up->port.irq, i);
-
- serial_do_unlink(i, up);
- mutex_unlock(&hash_mutex);
-}
-
-/*
- * This function is used to handle ports that do not have an
- * interrupt. This doesn't work very well for 16450's, but gives
- * barely passable results for a 16550A. (Although at the expense
- * of much CPU overhead).
- */
-static void serial8250_timeout(unsigned long data)
-{
- struct uart_8250_port *up = (struct uart_8250_port *)data;
-
- up->port.handle_irq(&up->port);
- mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port));
-}
-
-static void serial8250_backup_timeout(unsigned long data)
-{
- struct uart_8250_port *up = (struct uart_8250_port *)data;
- unsigned int iir, ier = 0, lsr;
- unsigned long flags;
-
- spin_lock_irqsave(&up->port.lock, flags);
-
- /*
- * Must disable interrupts or else we risk racing with the interrupt
- * based handler.
- */
- if (is_real_interrupt(up->port.irq)) {
- ier = serial_in(up, UART_IER);
- serial_out(up, UART_IER, 0);
- }
-
- iir = serial_in(up, UART_IIR);
-
- /*
- * This should be a safe test for anyone who doesn't trust the
- * IIR bits on their UART, but it's specifically designed for
- * the "Diva" UART used on the management processor on many HP
- * ia64 and parisc boxes.
- */
- lsr = serial_in(up, UART_LSR);
- up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
- if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
- (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
- (lsr & UART_LSR_THRE)) {
- iir &= ~(UART_IIR_ID | UART_IIR_NO_INT);
- iir |= UART_IIR_THRI;
- }
-
- if (!(iir & UART_IIR_NO_INT))
- serial8250_tx_chars(up);
-
- if (is_real_interrupt(up->port.irq))
- serial_out(up, UART_IER, ier);
-
- spin_unlock_irqrestore(&up->port.lock, flags);
-
- /* Standard timer interval plus 0.2s to keep the port running */
- mod_timer(&up->timer,
- jiffies + uart_poll_timeout(&up->port) + HZ / 5);
-}
-
-static unsigned int serial8250_tx_empty(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- unsigned long flags;
- unsigned int lsr;
-
- spin_lock_irqsave(&up->port.lock, flags);
- lsr = serial_in(up, UART_LSR);
- up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
- spin_unlock_irqrestore(&up->port.lock, flags);
-
- return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0;
-}
-
-static unsigned int serial8250_get_mctrl(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- unsigned int status;
- unsigned int ret;
-
- status = serial8250_modem_status(up);
-
- ret = 0;
- if (status & UART_MSR_DCD)
- ret |= TIOCM_CAR;
- if (status & UART_MSR_RI)
- ret |= TIOCM_RNG;
- if (status & UART_MSR_DSR)
- ret |= TIOCM_DSR;
- if (status & UART_MSR_CTS)
- ret |= TIOCM_CTS;
- return ret;
-}
-
-static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- unsigned char mcr = 0;
-
- if (mctrl & TIOCM_RTS)
- mcr |= UART_MCR_RTS;
- if (mctrl & TIOCM_DTR)
- mcr |= UART_MCR_DTR;
- if (mctrl & TIOCM_OUT1)
- mcr |= UART_MCR_OUT1;
- if (mctrl & TIOCM_OUT2)
- mcr |= UART_MCR_OUT2;
- if (mctrl & TIOCM_LOOP)
- mcr |= UART_MCR_LOOP;
-
- mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
-
- serial_out(up, UART_MCR, mcr);
-}
-
-static void serial8250_break_ctl(struct uart_port *port, int break_state)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- unsigned long flags;
-
- spin_lock_irqsave(&up->port.lock, flags);
- if (break_state == -1)
- up->lcr |= UART_LCR_SBC;
- else
- up->lcr &= ~UART_LCR_SBC;
- serial_out(up, UART_LCR, up->lcr);
- spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-/*
- * Wait for transmitter & holding register to empty
- */
-static void wait_for_xmitr(struct uart_8250_port *up, int bits)
-{
- unsigned int status, tmout = 10000;
-
- /* Wait up to 10ms for the character(s) to be sent. */
- for (;;) {
- status = serial_in(up, UART_LSR);
-
- up->lsr_saved_flags |= status & LSR_SAVE_FLAGS;
-
- if ((status & bits) == bits)
- break;
- if (--tmout == 0)
- break;
- udelay(1);
- }
-
- /* Wait up to 1s for flow control if necessary */
- if (up->port.flags & UPF_CONS_FLOW) {
- unsigned int tmout;
- for (tmout = 1000000; tmout; tmout--) {
- unsigned int msr = serial_in(up, UART_MSR);
- up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
- if (msr & UART_MSR_CTS)
- break;
- udelay(1);
- touch_nmi_watchdog();
- }
- }
-}
-
-#ifdef CONFIG_CONSOLE_POLL
-/*
- * Console polling routines for writing and reading from the uart while
- * in an interrupt or debug context.
- */
-
-static int serial8250_get_poll_char(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- unsigned char lsr = serial_inp(up, UART_LSR);
-
- if (!(lsr & UART_LSR_DR))
- return NO_POLL_CHAR;
-
- return serial_inp(up, UART_RX);
-}
-
-
-static void serial8250_put_poll_char(struct uart_port *port,
- unsigned char c)
-{
- unsigned int ier;
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- /*
- * First save the IER then disable the interrupts
- */
- ier = serial_in(up, UART_IER);
- if (up->capabilities & UART_CAP_UUE)
- serial_out(up, UART_IER, UART_IER_UUE);
- else
- serial_out(up, UART_IER, 0);
-
- wait_for_xmitr(up, BOTH_EMPTY);
- /*
- * Send the character out.
- * If a LF, also do CR...
- */
- serial_out(up, UART_TX, c);
- if (c == 10) {
- wait_for_xmitr(up, BOTH_EMPTY);
- serial_out(up, UART_TX, 13);
- }
-
- /*
- * Finally, wait for transmitter to become empty
- * and restore the IER
- */
- wait_for_xmitr(up, BOTH_EMPTY);
- serial_out(up, UART_IER, ier);
-}
-
-#endif /* CONFIG_CONSOLE_POLL */
-
-static int serial8250_startup(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- unsigned long flags;
- unsigned char lsr, iir;
- int retval;
-
- up->port.fifosize = uart_config[up->port.type].fifo_size;
- up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
- up->capabilities = uart_config[up->port.type].flags;
- up->mcr = 0;
-
- if (up->port.iotype != up->cur_iotype)
- set_io_from_upio(port);
-
- if (up->port.type == PORT_16C950) {
- /* Wake up and initialize UART */
- up->acr = 0;
- serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_outp(up, UART_EFR, UART_EFR_ECB);
- serial_outp(up, UART_IER, 0);
- serial_outp(up, UART_LCR, 0);
- serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
- serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_outp(up, UART_EFR, UART_EFR_ECB);
- serial_outp(up, UART_LCR, 0);
- }
-
-#ifdef CONFIG_SERIAL_8250_RSA
- /*
- * If this is an RSA port, see if we can kick it up to the
- * higher speed clock.
- */
- enable_rsa(up);
-#endif
-
- /*
- * Clear the FIFO buffers and disable them.
- * (they will be reenabled in set_termios())
- */
- serial8250_clear_fifos(up);
-
- /*
- * Clear the interrupt registers.
- */
- (void) serial_inp(up, UART_LSR);
- (void) serial_inp(up, UART_RX);
- (void) serial_inp(up, UART_IIR);
- (void) serial_inp(up, UART_MSR);
-
- /*
- * At this point, there's no way the LSR could still be 0xff;
- * if it is, then bail out, because there's likely no UART
- * here.
- */
- if (!(up->port.flags & UPF_BUGGY_UART) &&
- (serial_inp(up, UART_LSR) == 0xff)) {
- printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
- serial_index(&up->port));
- return -ENODEV;
- }
-
- /*
- * For a XR16C850, we need to set the trigger levels
- */
- if (up->port.type == PORT_16850) {
- unsigned char fctr;
-
- serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
-
- fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX);
- serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX);
- serial_outp(up, UART_TRG, UART_TRG_96);
- serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX);
- serial_outp(up, UART_TRG, UART_TRG_96);
-
- serial_outp(up, UART_LCR, 0);
- }
-
- if (is_real_interrupt(up->port.irq)) {
- unsigned char iir1;
- /*
- * Test for UARTs that do not reassert THRE when the
- * transmitter is idle and the interrupt has already
- * been cleared. Real 16550s should always reassert
- * this interrupt whenever the transmitter is idle and
- * the interrupt is enabled. Delays are necessary to
- * allow register changes to become visible.
- */
- spin_lock_irqsave(&up->port.lock, flags);
- if (up->port.irqflags & IRQF_SHARED)
- disable_irq_nosync(up->port.irq);
-
- wait_for_xmitr(up, UART_LSR_THRE);
- serial_out_sync(up, UART_IER, UART_IER_THRI);
- udelay(1); /* allow THRE to set */
- iir1 = serial_in(up, UART_IIR);
- serial_out(up, UART_IER, 0);
- serial_out_sync(up, UART_IER, UART_IER_THRI);
- udelay(1); /* allow a working UART time to re-assert THRE */
- iir = serial_in(up, UART_IIR);
- serial_out(up, UART_IER, 0);
-
- if (up->port.irqflags & IRQF_SHARED)
- enable_irq(up->port.irq);
- spin_unlock_irqrestore(&up->port.lock, flags);
-
- /*
- * If the interrupt is not reasserted, setup a timer to
- * kick the UART on a regular basis.
- */
- if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
- up->bugs |= UART_BUG_THRE;
- pr_debug("ttyS%d - using backup timer\n",
- serial_index(port));
- }
- }
-
- /*
- * The above check will only give an accurate result the first time
- * the port is opened so this value needs to be preserved.
- */
- if (up->bugs & UART_BUG_THRE) {
- up->timer.function = serial8250_backup_timeout;
- up->timer.data = (unsigned long)up;
- mod_timer(&up->timer, jiffies +
- uart_poll_timeout(port) + HZ / 5);
- }
-
- /*
- * If the "interrupt" for this port doesn't correspond with any
- * hardware interrupt, we use a timer-based system. The original
- * driver used to do this with IRQ0.
- */
- if (!is_real_interrupt(up->port.irq)) {
- up->timer.data = (unsigned long)up;
- mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
- } else {
- retval = serial_link_irq_chain(up);
- if (retval)
- return retval;
- }
-
- /*
- * Now, initialize the UART
- */
- serial_outp(up, UART_LCR, UART_LCR_WLEN8);
-
- spin_lock_irqsave(&up->port.lock, flags);
- if (up->port.flags & UPF_FOURPORT) {
- if (!is_real_interrupt(up->port.irq))
- up->port.mctrl |= TIOCM_OUT1;
- } else
- /*
- * Most PC uarts need OUT2 raised to enable interrupts.
- */
- if (is_real_interrupt(up->port.irq))
- up->port.mctrl |= TIOCM_OUT2;
-
- serial8250_set_mctrl(&up->port, up->port.mctrl);
-
- /* Serial over Lan (SoL) hack:
- Intel 8257x Gigabit ethernet chips have a
- 16550 emulation, to be used for Serial Over Lan.
- Those chips take a longer time than a normal
- serial device to signalize that a transmission
- data was queued. Due to that, the above test generally
- fails. One solution would be to delay the reading of
- iir. However, this is not reliable, since the timeout
- is variable. So, let's just don't test if we receive
- TX irq. This way, we'll never enable UART_BUG_TXEN.
- */
- if (skip_txen_test || up->port.flags & UPF_NO_TXEN_TEST)
- goto dont_test_tx_en;
-
- /*
- * Do a quick test to see if we receive an
- * interrupt when we enable the TX irq.
- */
- serial_outp(up, UART_IER, UART_IER_THRI);
- lsr = serial_in(up, UART_LSR);
- iir = serial_in(up, UART_IIR);
- serial_outp(up, UART_IER, 0);
-
- if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
- if (!(up->bugs & UART_BUG_TXEN)) {
- up->bugs |= UART_BUG_TXEN;
- pr_debug("ttyS%d - enabling bad tx status workarounds\n",
- serial_index(port));
- }
- } else {
- up->bugs &= ~UART_BUG_TXEN;
- }
-
-dont_test_tx_en:
- spin_unlock_irqrestore(&up->port.lock, flags);
-
- /*
- * Clear the interrupt registers again for luck, and clear the
- * saved flags to avoid getting false values from polling
- * routines or the previous session.
- */
- serial_inp(up, UART_LSR);
- serial_inp(up, UART_RX);
- serial_inp(up, UART_IIR);
- serial_inp(up, UART_MSR);
- up->lsr_saved_flags = 0;
- up->msr_saved_flags = 0;
-
- /*
- * Finally, enable interrupts. Note: Modem status interrupts
- * are set via set_termios(), which will be occurring imminently
- * anyway, so we don't enable them here.
- */
- up->ier = UART_IER_RLSI | UART_IER_RDI;
- serial_outp(up, UART_IER, up->ier);
-
- if (up->port.flags & UPF_FOURPORT) {
- unsigned int icp;
- /*
- * Enable interrupts on the AST Fourport board
- */
- icp = (up->port.iobase & 0xfe0) | 0x01f;
- outb_p(0x80, icp);
- (void) inb_p(icp);
- }
-
- return 0;
-}
-
-static void serial8250_shutdown(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- unsigned long flags;
-
- /*
- * Disable interrupts from this port
- */
- up->ier = 0;
- serial_outp(up, UART_IER, 0);
-
- spin_lock_irqsave(&up->port.lock, flags);
- if (up->port.flags & UPF_FOURPORT) {
- /* reset interrupts on the AST Fourport board */
- inb((up->port.iobase & 0xfe0) | 0x1f);
- up->port.mctrl |= TIOCM_OUT1;
- } else
- up->port.mctrl &= ~TIOCM_OUT2;
-
- serial8250_set_mctrl(&up->port, up->port.mctrl);
- spin_unlock_irqrestore(&up->port.lock, flags);
-
- /*
- * Disable break condition and FIFOs
- */
- serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
- serial8250_clear_fifos(up);
-
-#ifdef CONFIG_SERIAL_8250_RSA
- /*
- * Reset the RSA board back to 115kbps compat mode.
- */
- disable_rsa(up);
-#endif
-
- /*
- * Read data port to reset things, and then unlink from
- * the IRQ chain.
- */
- (void) serial_in(up, UART_RX);
-
- del_timer_sync(&up->timer);
- up->timer.function = serial8250_timeout;
- if (is_real_interrupt(up->port.irq))
- serial_unlink_irq_chain(up);
-}
-
-static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
-{
- unsigned int quot;
-
- /*
- * Handle magic divisors for baud rates above baud_base on
- * SMSC SuperIO chips.
- */
- if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
- baud == (port->uartclk/4))
- quot = 0x8001;
- else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
- baud == (port->uartclk/8))
- quot = 0x8002;
- else
- quot = uart_get_divisor(port, baud);
-
- return quot;
-}
-
-void
-serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- unsigned char cval, fcr = 0;
- unsigned long flags;
- unsigned int baud, quot;
-
- switch (termios->c_cflag & CSIZE) {
- case CS5:
- cval = UART_LCR_WLEN5;
- break;
- case CS6:
- cval = UART_LCR_WLEN6;
- break;
- case CS7:
- cval = UART_LCR_WLEN7;
- break;
- default:
- case CS8:
- cval = UART_LCR_WLEN8;
- break;
- }
-
- if (termios->c_cflag & CSTOPB)
- cval |= UART_LCR_STOP;
- if (termios->c_cflag & PARENB)
- cval |= UART_LCR_PARITY;
- if (!(termios->c_cflag & PARODD))
- cval |= UART_LCR_EPAR;
-#ifdef CMSPAR
- if (termios->c_cflag & CMSPAR)
- cval |= UART_LCR_SPAR;
-#endif
-
- /*
- * Ask the core to calculate the divisor for us.
- */
- baud = uart_get_baud_rate(port, termios, old,
- port->uartclk / 16 / 0xffff,
- port->uartclk / 16);
- quot = serial8250_get_divisor(port, baud);
-
- /*
- * Oxford Semi 952 rev B workaround
- */
- if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0)
- quot++;
-
- if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) {
- if (baud < 2400)
- fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
- else
- fcr = uart_config[up->port.type].fcr;
- }
-
- /*
- * MCR-based auto flow control. When AFE is enabled, RTS will be
- * deasserted when the receive FIFO contains more characters than
- * the trigger, or the MCR RTS bit is cleared. In the case where
- * the remote UART is not using CTS auto flow control, we must
- * have sufficient FIFO entries for the latency of the remote
- * UART to respond. IOW, at least 32 bytes of FIFO.
- */
- if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) {
- up->mcr &= ~UART_MCR_AFE;
- if (termios->c_cflag & CRTSCTS)
- up->mcr |= UART_MCR_AFE;
- }
-
- /*
- * Ok, we're now changing the port state. Do it with
- * interrupts disabled.
- */
- spin_lock_irqsave(&up->port.lock, flags);
-
- /*
- * Update the per-port timeout.
- */
- uart_update_timeout(port, termios->c_cflag, baud);
-
- up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
- if (termios->c_iflag & INPCK)
- up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (termios->c_iflag & (BRKINT | PARMRK))
- up->port.read_status_mask |= UART_LSR_BI;
-
- /*
- * Characteres to ignore
- */
- up->port.ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
- if (termios->c_iflag & IGNBRK) {
- up->port.ignore_status_mask |= UART_LSR_BI;
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (termios->c_iflag & IGNPAR)
- up->port.ignore_status_mask |= UART_LSR_OE;
- }
-
- /*
- * ignore all characters if CREAD is not set
- */
- if ((termios->c_cflag & CREAD) == 0)
- up->port.ignore_status_mask |= UART_LSR_DR;
-
- /*
- * CTS flow control flag and modem status interrupts
- */
- up->ier &= ~UART_IER_MSI;
- if (!(up->bugs & UART_BUG_NOMSR) &&
- UART_ENABLE_MS(&up->port, termios->c_cflag))
- up->ier |= UART_IER_MSI;
- if (up->capabilities & UART_CAP_UUE)
- up->ier |= UART_IER_UUE;
- if (up->capabilities & UART_CAP_RTOIE)
- up->ier |= UART_IER_RTOIE;
-
- serial_out(up, UART_IER, up->ier);
-
- if (up->capabilities & UART_CAP_EFR) {
- unsigned char efr = 0;
- /*
- * TI16C752/Startech hardware flow control. FIXME:
- * - TI16C752 requires control thresholds to be set.
- * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled.
- */
- if (termios->c_cflag & CRTSCTS)
- efr |= UART_EFR_CTS;
-
- serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
- if (up->port.flags & UPF_EXAR_EFR)
- serial_outp(up, UART_XR_EFR, efr);
- else
- serial_outp(up, UART_EFR, efr);
- }
-
-#ifdef CONFIG_ARCH_OMAP
- /* Workaround to enable 115200 baud on OMAP1510 internal ports */
- if (cpu_is_omap1510() && is_omap_port(up)) {
- if (baud == 115200) {
- quot = 1;
- serial_out(up, UART_OMAP_OSC_12M_SEL, 1);
- } else
- serial_out(up, UART_OMAP_OSC_12M_SEL, 0);
- }
-#endif
-
- if (up->capabilities & UART_NATSEMI) {
- /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */
- serial_outp(up, UART_LCR, 0xe0);
- } else {
- serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
- }
-
- serial_dl_write(up, quot);
-
- /*
- * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
- * is written without DLAB set, this mode will be disabled.
- */
- if (up->port.type == PORT_16750)
- serial_outp(up, UART_FCR, fcr);
-
- serial_outp(up, UART_LCR, cval); /* reset DLAB */
- up->lcr = cval; /* Save LCR */
- if (up->port.type != PORT_16750) {
- if (fcr & UART_FCR_ENABLE_FIFO) {
- /* emulated UARTs (Lucent Venus 167x) need two steps */
- serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
- }
- serial_outp(up, UART_FCR, fcr); /* set fcr */
- }
- serial8250_set_mctrl(&up->port, up->port.mctrl);
- spin_unlock_irqrestore(&up->port.lock, flags);
- /* Don't rewrite B0 */
- if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
-}
-EXPORT_SYMBOL(serial8250_do_set_termios);
-
-static void
-serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
-{
- if (port->set_termios)
- port->set_termios(port, termios, old);
- else
- serial8250_do_set_termios(port, termios, old);
-}
-
-static void
-serial8250_set_ldisc(struct uart_port *port, int new)
-{
- if (new == N_PPS) {
- port->flags |= UPF_HARDPPS_CD;
- serial8250_enable_ms(port);
- } else
- port->flags &= ~UPF_HARDPPS_CD;
-}
-
-
-void serial8250_do_pm(struct uart_port *port, unsigned int state,
- unsigned int oldstate)
-{
- struct uart_8250_port *p =
- container_of(port, struct uart_8250_port, port);
-
- serial8250_set_sleep(p, state != 0);
-}
-EXPORT_SYMBOL(serial8250_do_pm);
-
-static void
-serial8250_pm(struct uart_port *port, unsigned int state,
- unsigned int oldstate)
-{
- if (port->pm)
- port->pm(port, state, oldstate);
- else
- serial8250_do_pm(port, state, oldstate);
-}
-
-static unsigned int serial8250_port_size(struct uart_8250_port *pt)
-{
- if (pt->port.iotype == UPIO_AU)
- return 0x1000;
-#ifdef CONFIG_ARCH_OMAP
- if (is_omap_port(pt))
- return 0x16 << pt->port.regshift;
-#endif
- return 8 << pt->port.regshift;
-}
-
-/*
- * Resource handling.
- */
-static int serial8250_request_std_resource(struct uart_8250_port *up)
-{
- unsigned int size = serial8250_port_size(up);
- int ret = 0;
-
- switch (up->port.iotype) {
- case UPIO_AU:
- case UPIO_TSI:
- case UPIO_MEM32:
- case UPIO_MEM:
- if (!up->port.mapbase)
- break;
-
- if (!request_mem_region(up->port.mapbase, size, "serial")) {
- ret = -EBUSY;
- break;
- }
-
- if (up->port.flags & UPF_IOREMAP) {
- up->port.membase = ioremap_nocache(up->port.mapbase,
- size);
- if (!up->port.membase) {
- release_mem_region(up->port.mapbase, size);
- ret = -ENOMEM;
- }
- }
- break;
-
- case UPIO_HUB6:
- case UPIO_PORT:
- if (!request_region(up->port.iobase, size, "serial"))
- ret = -EBUSY;
- break;
- }
- return ret;
-}
-
-static void serial8250_release_std_resource(struct uart_8250_port *up)
-{
- unsigned int size = serial8250_port_size(up);
-
- switch (up->port.iotype) {
- case UPIO_AU:
- case UPIO_TSI:
- case UPIO_MEM32:
- case UPIO_MEM:
- if (!up->port.mapbase)
- break;
-
- if (up->port.flags & UPF_IOREMAP) {
- iounmap(up->port.membase);
- up->port.membase = NULL;
- }
-
- release_mem_region(up->port.mapbase, size);
- break;
-
- case UPIO_HUB6:
- case UPIO_PORT:
- release_region(up->port.iobase, size);
- break;
- }
-}
-
-static int serial8250_request_rsa_resource(struct uart_8250_port *up)
-{
- unsigned long start = UART_RSA_BASE << up->port.regshift;
- unsigned int size = 8 << up->port.regshift;
- int ret = -EINVAL;
-
- switch (up->port.iotype) {
- case UPIO_HUB6:
- case UPIO_PORT:
- start += up->port.iobase;
- if (request_region(start, size, "serial-rsa"))
- ret = 0;
- else
- ret = -EBUSY;
- break;
- }
-
- return ret;
-}
-
-static void serial8250_release_rsa_resource(struct uart_8250_port *up)
-{
- unsigned long offset = UART_RSA_BASE << up->port.regshift;
- unsigned int size = 8 << up->port.regshift;
-
- switch (up->port.iotype) {
- case UPIO_HUB6:
- case UPIO_PORT:
- release_region(up->port.iobase + offset, size);
- break;
- }
-}
-
-static void serial8250_release_port(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- serial8250_release_std_resource(up);
- if (up->port.type == PORT_RSA)
- serial8250_release_rsa_resource(up);
-}
-
-static int serial8250_request_port(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- int ret = 0;
-
- ret = serial8250_request_std_resource(up);
- if (ret == 0 && up->port.type == PORT_RSA) {
- ret = serial8250_request_rsa_resource(up);
- if (ret < 0)
- serial8250_release_std_resource(up);
- }
-
- return ret;
-}
-
-static void serial8250_config_port(struct uart_port *port, int flags)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
- int probeflags = PROBE_ANY;
- int ret;
-
- /*
- * Find the region that we can probe for. This in turn
- * tells us whether we can probe for the type of port.
- */
- ret = serial8250_request_std_resource(up);
- if (ret < 0)
- return;
-
- ret = serial8250_request_rsa_resource(up);
- if (ret < 0)
- probeflags &= ~PROBE_RSA;
-
- if (up->port.iotype != up->cur_iotype)
- set_io_from_upio(port);
-
- if (flags & UART_CONFIG_TYPE)
- autoconfig(up, probeflags);
-
- /* if access method is AU, it is a 16550 with a quirk */
- if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
- up->bugs |= UART_BUG_NOMSR;
-
- if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
- autoconfig_irq(up);
-
- if (up->port.type != PORT_RSA && probeflags & PROBE_RSA)
- serial8250_release_rsa_resource(up);
- if (up->port.type == PORT_UNKNOWN)
- serial8250_release_std_resource(up);
-}
-
-static int
-serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- if (ser->irq >= nr_irqs || ser->irq < 0 ||
- ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
- ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
- ser->type == PORT_STARTECH)
- return -EINVAL;
- return 0;
-}
-
-static const char *
-serial8250_type(struct uart_port *port)
-{
- int type = port->type;
-
- if (type >= ARRAY_SIZE(uart_config))
- type = 0;
- return uart_config[type].name;
-}
-
-static struct uart_ops serial8250_pops = {
- .tx_empty = serial8250_tx_empty,
- .set_mctrl = serial8250_set_mctrl,
- .get_mctrl = serial8250_get_mctrl,
- .stop_tx = serial8250_stop_tx,
- .start_tx = serial8250_start_tx,
- .stop_rx = serial8250_stop_rx,
- .enable_ms = serial8250_enable_ms,
- .break_ctl = serial8250_break_ctl,
- .startup = serial8250_startup,
- .shutdown = serial8250_shutdown,
- .set_termios = serial8250_set_termios,
- .set_ldisc = serial8250_set_ldisc,
- .pm = serial8250_pm,
- .type = serial8250_type,
- .release_port = serial8250_release_port,
- .request_port = serial8250_request_port,
- .config_port = serial8250_config_port,
- .verify_port = serial8250_verify_port,
-#ifdef CONFIG_CONSOLE_POLL
- .poll_get_char = serial8250_get_poll_char,
- .poll_put_char = serial8250_put_poll_char,
-#endif
-};
-
-static struct uart_8250_port serial8250_ports[UART_NR];
-
-static void (*serial8250_isa_config)(int port, struct uart_port *up,
- unsigned short *capabilities);
-
-void serial8250_set_isa_configurator(
- void (*v)(int port, struct uart_port *up, unsigned short *capabilities))
-{
- serial8250_isa_config = v;
-}
-EXPORT_SYMBOL(serial8250_set_isa_configurator);
-
-static void __init serial8250_isa_init_ports(void)
-{
- struct uart_8250_port *up;
- static int first = 1;
- int i, irqflag = 0;
-
- if (!first)
- return;
- first = 0;
-
- for (i = 0; i < nr_uarts; i++) {
- struct uart_8250_port *up = &serial8250_ports[i];
-
- up->port.line = i;
- spin_lock_init(&up->port.lock);
-
- init_timer(&up->timer);
- up->timer.function = serial8250_timeout;
-
- /*
- * ALPHA_KLUDGE_MCR needs to be killed.
- */
- up->mcr_mask = ~ALPHA_KLUDGE_MCR;
- up->mcr_force = ALPHA_KLUDGE_MCR;
-
- up->port.ops = &serial8250_pops;
- }
-
- if (share_irqs)
- irqflag = IRQF_SHARED;
-
- for (i = 0, up = serial8250_ports;
- i < ARRAY_SIZE(old_serial_port) && i < nr_uarts;
- i++, up++) {
- up->port.iobase = old_serial_port[i].port;
- up->port.irq = irq_canonicalize(old_serial_port[i].irq);
- up->port.irqflags = old_serial_port[i].irqflags;
- up->port.uartclk = old_serial_port[i].baud_base * 16;
- up->port.flags = old_serial_port[i].flags;
- up->port.hub6 = old_serial_port[i].hub6;
- up->port.membase = old_serial_port[i].iomem_base;
- up->port.iotype = old_serial_port[i].io_type;
- up->port.regshift = old_serial_port[i].iomem_reg_shift;
- set_io_from_upio(&up->port);
- up->port.irqflags |= irqflag;
- if (serial8250_isa_config != NULL)
- serial8250_isa_config(i, &up->port, &up->capabilities);
-
- }
-}
-
-static void
-serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type)
-{
- up->port.type = type;
- up->port.fifosize = uart_config[type].fifo_size;
- up->capabilities = uart_config[type].flags;
- up->tx_loadsz = uart_config[type].tx_loadsz;
-}
-
-static void __init
-serial8250_register_ports(struct uart_driver *drv, struct device *dev)
-{
- int i;
-
- for (i = 0; i < nr_uarts; i++) {
- struct uart_8250_port *up = &serial8250_ports[i];
- up->cur_iotype = 0xFF;
- }
-
- serial8250_isa_init_ports();
-
- for (i = 0; i < nr_uarts; i++) {
- struct uart_8250_port *up = &serial8250_ports[i];
-
- up->port.dev = dev;
-
- if (up->port.flags & UPF_FIXED_TYPE)
- serial8250_init_fixed_type_port(up, up->port.type);
-
- uart_add_one_port(drv, &up->port);
- }
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-
-static void serial8250_console_putchar(struct uart_port *port, int ch)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- wait_for_xmitr(up, UART_LSR_THRE);
- serial_out(up, UART_TX, ch);
-}
-
-/*
- * Print a string to the serial port trying not to disturb
- * any possible real use of the port...
- *
- * The console_lock must be held when we get here.
- */
-static void
-serial8250_console_write(struct console *co, const char *s, unsigned int count)
-{
- struct uart_8250_port *up = &serial8250_ports[co->index];
- unsigned long flags;
- unsigned int ier;
- int locked = 1;
-
- touch_nmi_watchdog();
-
- local_irq_save(flags);
- if (up->port.sysrq) {
- /* serial8250_handle_irq() already took the lock */
- locked = 0;
- } else if (oops_in_progress) {
- locked = spin_trylock(&up->port.lock);
- } else
- spin_lock(&up->port.lock);
-
- /*
- * First save the IER then disable the interrupts
- */
- ier = serial_in(up, UART_IER);
-
- if (up->capabilities & UART_CAP_UUE)
- serial_out(up, UART_IER, UART_IER_UUE);
- else
- serial_out(up, UART_IER, 0);
-
- uart_console_write(&up->port, s, count, serial8250_console_putchar);
-
- /*
- * Finally, wait for transmitter to become empty
- * and restore the IER
- */
- wait_for_xmitr(up, BOTH_EMPTY);
- serial_out(up, UART_IER, ier);
-
- /*
- * The receive handling will happen properly because the
- * receive ready bit will still be set; it is not cleared
- * on read. However, modem control will not, we must
- * call it if we have saved something in the saved flags
- * while processing with interrupts off.
- */
- if (up->msr_saved_flags)
- serial8250_modem_status(up);
-
- if (locked)
- spin_unlock(&up->port.lock);
- local_irq_restore(flags);
-}
-
-static int __init serial8250_console_setup(struct console *co, char *options)
-{
- struct uart_port *port;
- int baud = 9600;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- /*
- * Check whether an invalid uart number has been specified, and
- * if so, search for the first available port that does have
- * console support.
- */
- if (co->index >= nr_uarts)
- co->index = 0;
- port = &serial8250_ports[co->index].port;
- if (!port->iobase && !port->membase)
- return -ENODEV;
-
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static int serial8250_console_early_setup(void)
-{
- return serial8250_find_port_for_earlycon();
-}
-
-static struct console serial8250_console = {
- .name = "ttyS",
- .write = serial8250_console_write,
- .device = uart_console_device,
- .setup = serial8250_console_setup,
- .early_setup = serial8250_console_early_setup,
- .flags = CON_PRINTBUFFER | CON_ANYTIME,
- .index = -1,
- .data = &serial8250_reg,
-};
-
-static int __init serial8250_console_init(void)
-{
- if (nr_uarts > UART_NR)
- nr_uarts = UART_NR;
-
- serial8250_isa_init_ports();
- register_console(&serial8250_console);
- return 0;
-}
-console_initcall(serial8250_console_init);
-
-int serial8250_find_port(struct uart_port *p)
-{
- int line;
- struct uart_port *port;
-
- for (line = 0; line < nr_uarts; line++) {
- port = &serial8250_ports[line].port;
- if (uart_match_port(p, port))
- return line;
- }
- return -ENODEV;
-}
-
-#define SERIAL8250_CONSOLE &serial8250_console
-#else
-#define SERIAL8250_CONSOLE NULL
-#endif
-
-static struct uart_driver serial8250_reg = {
- .owner = THIS_MODULE,
- .driver_name = "serial",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
- .cons = SERIAL8250_CONSOLE,
-};
-
-/*
- * early_serial_setup - early registration for 8250 ports
- *
- * Setup an 8250 port structure prior to console initialisation. Use
- * after console initialisation will cause undefined behaviour.
- */
-int __init early_serial_setup(struct uart_port *port)
-{
- struct uart_port *p;
-
- if (port->line >= ARRAY_SIZE(serial8250_ports))
- return -ENODEV;
-
- serial8250_isa_init_ports();
- p = &serial8250_ports[port->line].port;
- p->iobase = port->iobase;
- p->membase = port->membase;
- p->irq = port->irq;
- p->irqflags = port->irqflags;
- p->uartclk = port->uartclk;
- p->fifosize = port->fifosize;
- p->regshift = port->regshift;
- p->iotype = port->iotype;
- p->flags = port->flags;
- p->mapbase = port->mapbase;
- p->private_data = port->private_data;
- p->type = port->type;
- p->line = port->line;
-
- set_io_from_upio(p);
- if (port->serial_in)
- p->serial_in = port->serial_in;
- if (port->serial_out)
- p->serial_out = port->serial_out;
- if (port->handle_irq)
- p->handle_irq = port->handle_irq;
- else
- p->handle_irq = serial8250_default_handle_irq;
-
- return 0;
-}
-
-/**
- * serial8250_suspend_port - suspend one serial port
- * @line: serial line number
- *
- * Suspend one serial port.
- */
-void serial8250_suspend_port(int line)
-{
- uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port);
-}
-
-/**
- * serial8250_resume_port - resume one serial port
- * @line: serial line number
- *
- * Resume one serial port.
- */
-void serial8250_resume_port(int line)
-{
- struct uart_8250_port *up = &serial8250_ports[line];
-
- if (up->capabilities & UART_NATSEMI) {
- /* Ensure it's still in high speed mode */
- serial_outp(up, UART_LCR, 0xE0);
-
- ns16550a_goto_highspeed(up);
-
- serial_outp(up, UART_LCR, 0);
- up->port.uartclk = 921600*16;
- }
- uart_resume_port(&serial8250_reg, &up->port);
-}
-
-/*
- * Register a set of serial devices attached to a platform device. The
- * list is terminated with a zero flags entry, which means we expect
- * all entries to have at least UPF_BOOT_AUTOCONF set.
- */
-static int __devinit serial8250_probe(struct platform_device *dev)
-{
- struct plat_serial8250_port *p = dev->dev.platform_data;
- struct uart_port port;
- int ret, i, irqflag = 0;
-
- memset(&port, 0, sizeof(struct uart_port));
-
- if (share_irqs)
- irqflag = IRQF_SHARED;
-
- for (i = 0; p && p->flags != 0; p++, i++) {
- port.iobase = p->iobase;
- port.membase = p->membase;
- port.irq = p->irq;
- port.irqflags = p->irqflags;
- port.uartclk = p->uartclk;
- port.regshift = p->regshift;
- port.iotype = p->iotype;
- port.flags = p->flags;
- port.mapbase = p->mapbase;
- port.hub6 = p->hub6;
- port.private_data = p->private_data;
- port.type = p->type;
- port.serial_in = p->serial_in;
- port.serial_out = p->serial_out;
- port.handle_irq = p->handle_irq;
- port.set_termios = p->set_termios;
- port.pm = p->pm;
- port.dev = &dev->dev;
- port.irqflags |= irqflag;
- ret = serial8250_register_port(&port);
- if (ret < 0) {
- dev_err(&dev->dev, "unable to register port at index %d "
- "(IO%lx MEM%llx IRQ%d): %d\n", i,
- p->iobase, (unsigned long long)p->mapbase,
- p->irq, ret);
- }
- }
- return 0;
-}
-
-/*
- * Remove serial ports registered against a platform device.
- */
-static int __devexit serial8250_remove(struct platform_device *dev)
-{
- int i;
-
- for (i = 0; i < nr_uarts; i++) {
- struct uart_8250_port *up = &serial8250_ports[i];
-
- if (up->port.dev == &dev->dev)
- serial8250_unregister_port(i);
- }
- return 0;
-}
-
-static int serial8250_suspend(struct platform_device *dev, pm_message_t state)
-{
- int i;
-
- for (i = 0; i < UART_NR; i++) {
- struct uart_8250_port *up = &serial8250_ports[i];
-
- if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
- uart_suspend_port(&serial8250_reg, &up->port);
- }
-
- return 0;
-}
-
-static int serial8250_resume(struct platform_device *dev)
-{
- int i;
-
- for (i = 0; i < UART_NR; i++) {
- struct uart_8250_port *up = &serial8250_ports[i];
-
- if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
- serial8250_resume_port(i);
- }
-
- return 0;
-}
-
-static struct platform_driver serial8250_isa_driver = {
- .probe = serial8250_probe,
- .remove = __devexit_p(serial8250_remove),
- .suspend = serial8250_suspend,
- .resume = serial8250_resume,
- .driver = {
- .name = "serial8250",
- .owner = THIS_MODULE,
- },
-};
-
-/*
- * This "device" covers _all_ ISA 8250-compatible serial devices listed
- * in the table in include/asm/serial.h
- */
-static struct platform_device *serial8250_isa_devs;
-
-/*
- * serial8250_register_port and serial8250_unregister_port allows for
- * 16x50 serial ports to be configured at run-time, to support PCMCIA
- * modems and PCI multiport cards.
- */
-static DEFINE_MUTEX(serial_mutex);
-
-static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port)
-{
- int i;
-
- /*
- * First, find a port entry which matches.
- */
- for (i = 0; i < nr_uarts; i++)
- if (uart_match_port(&serial8250_ports[i].port, port))
- return &serial8250_ports[i];
-
- /*
- * We didn't find a matching entry, so look for the first
- * free entry. We look for one which hasn't been previously
- * used (indicated by zero iobase).
- */
- for (i = 0; i < nr_uarts; i++)
- if (serial8250_ports[i].port.type == PORT_UNKNOWN &&
- serial8250_ports[i].port.iobase == 0)
- return &serial8250_ports[i];
-
- /*
- * That also failed. Last resort is to find any entry which
- * doesn't have a real port associated with it.
- */
- for (i = 0; i < nr_uarts; i++)
- if (serial8250_ports[i].port.type == PORT_UNKNOWN)
- return &serial8250_ports[i];
-
- return NULL;
-}
-
-/**
- * serial8250_register_port - register a serial port
- * @port: serial port template
- *
- * Configure the serial port specified by the request. If the
- * port exists and is in use, it is hung up and unregistered
- * first.
- *
- * The port is then probed and if necessary the IRQ is autodetected
- * If this fails an error is returned.
- *
- * On success the port is ready to use and the line number is returned.
- */
-int serial8250_register_port(struct uart_port *port)
-{
- struct uart_8250_port *uart;
- int ret = -ENOSPC;
-
- if (port->uartclk == 0)
- return -EINVAL;
-
- mutex_lock(&serial_mutex);
-
- uart = serial8250_find_match_or_unused(port);
- if (uart) {
- uart_remove_one_port(&serial8250_reg, &uart->port);
-
- uart->port.iobase = port->iobase;
- uart->port.membase = port->membase;
- uart->port.irq = port->irq;
- uart->port.irqflags = port->irqflags;
- uart->port.uartclk = port->uartclk;
- uart->port.fifosize = port->fifosize;
- uart->port.regshift = port->regshift;
- uart->port.iotype = port->iotype;
- uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
- uart->port.mapbase = port->mapbase;
- uart->port.private_data = port->private_data;
- if (port->dev)
- uart->port.dev = port->dev;
-
- if (port->flags & UPF_FIXED_TYPE)
- serial8250_init_fixed_type_port(uart, port->type);
-
- set_io_from_upio(&uart->port);
- /* Possibly override default I/O functions. */
- if (port->serial_in)
- uart->port.serial_in = port->serial_in;
- if (port->serial_out)
- uart->port.serial_out = port->serial_out;
- if (port->handle_irq)
- uart->port.handle_irq = port->handle_irq;
- /* Possibly override set_termios call */
- if (port->set_termios)
- uart->port.set_termios = port->set_termios;
- if (port->pm)
- uart->port.pm = port->pm;
-
- if (serial8250_isa_config != NULL)
- serial8250_isa_config(0, &uart->port,
- &uart->capabilities);
-
- ret = uart_add_one_port(&serial8250_reg, &uart->port);
- if (ret == 0)
- ret = uart->port.line;
- }
- mutex_unlock(&serial_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(serial8250_register_port);
-
-/**
- * serial8250_unregister_port - remove a 16x50 serial port at runtime
- * @line: serial line number
- *
- * Remove one serial port. This may not be called from interrupt
- * context. We hand the port back to the our control.
- */
-void serial8250_unregister_port(int line)
-{
- struct uart_8250_port *uart = &serial8250_ports[line];
-
- mutex_lock(&serial_mutex);
- uart_remove_one_port(&serial8250_reg, &uart->port);
- if (serial8250_isa_devs) {
- uart->port.flags &= ~UPF_BOOT_AUTOCONF;
- uart->port.type = PORT_UNKNOWN;
- uart->port.dev = &serial8250_isa_devs->dev;
- uart->capabilities = uart_config[uart->port.type].flags;
- uart_add_one_port(&serial8250_reg, &uart->port);
- } else {
- uart->port.dev = NULL;
- }
- mutex_unlock(&serial_mutex);
-}
-EXPORT_SYMBOL(serial8250_unregister_port);
-
-static int __init serial8250_init(void)
-{
- int ret;
-
- if (nr_uarts > UART_NR)
- nr_uarts = UART_NR;
-
- printk(KERN_INFO "Serial: 8250/16550 driver, "
- "%d ports, IRQ sharing %sabled\n", nr_uarts,
- share_irqs ? "en" : "dis");
-
-#ifdef CONFIG_SPARC
- ret = sunserial_register_minors(&serial8250_reg, UART_NR);
-#else
- serial8250_reg.nr = UART_NR;
- ret = uart_register_driver(&serial8250_reg);
-#endif
- if (ret)
- goto out;
-
- serial8250_isa_devs = platform_device_alloc("serial8250",
- PLAT8250_DEV_LEGACY);
- if (!serial8250_isa_devs) {
- ret = -ENOMEM;
- goto unreg_uart_drv;
- }
-
- ret = platform_device_add(serial8250_isa_devs);
- if (ret)
- goto put_dev;
-
- serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev);
-
- ret = platform_driver_register(&serial8250_isa_driver);
- if (ret == 0)
- goto out;
-
- platform_device_del(serial8250_isa_devs);
-put_dev:
- platform_device_put(serial8250_isa_devs);
-unreg_uart_drv:
-#ifdef CONFIG_SPARC
- sunserial_unregister_minors(&serial8250_reg, UART_NR);
-#else
- uart_unregister_driver(&serial8250_reg);
-#endif
-out:
- return ret;
-}
-
-static void __exit serial8250_exit(void)
-{
- struct platform_device *isa_dev = serial8250_isa_devs;
-
- /*
- * This tells serial8250_unregister_port() not to re-register
- * the ports (thereby making serial8250_isa_driver permanently
- * in use.)
- */
- serial8250_isa_devs = NULL;
-
- platform_driver_unregister(&serial8250_isa_driver);
- platform_device_unregister(isa_dev);
-
-#ifdef CONFIG_SPARC
- sunserial_unregister_minors(&serial8250_reg, UART_NR);
-#else
- uart_unregister_driver(&serial8250_reg);
-#endif
-}
-
-module_init(serial8250_init);
-module_exit(serial8250_exit);
-
-EXPORT_SYMBOL(serial8250_suspend_port);
-EXPORT_SYMBOL(serial8250_resume_port);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Generic 8250/16x50 serial driver");
-
-module_param(share_irqs, uint, 0644);
-MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
- " (unsafe)");
-
-module_param(nr_uarts, uint, 0644);
-MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
-
-module_param(skip_txen_test, uint, 0644);
-MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time");
-
-#ifdef CONFIG_SERIAL_8250_RSA
-module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
-MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
-#endif
-MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
+++ /dev/null
-/*
- * Driver for 8250/16550-type serial ports
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *
- * Copyright (C) 2001 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/serial_8250.h>
-
-struct uart_8250_port {
- struct uart_port port;
- struct timer_list timer; /* "no irq" timer */
- struct list_head list; /* ports on this IRQ */
- unsigned short capabilities; /* port capabilities */
- unsigned short bugs; /* port bugs */
- unsigned int tx_loadsz; /* transmit fifo load size */
- unsigned char acr;
- unsigned char ier;
- unsigned char lcr;
- unsigned char mcr;
- unsigned char mcr_mask; /* mask of user bits */
- unsigned char mcr_force; /* mask of forced bits */
- unsigned char cur_iotype; /* Running I/O type */
-
- /*
- * Some bits in registers are cleared on a read, so they must
- * be saved whenever the register is read but the bits will not
- * be immediately processed.
- */
-#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
- unsigned char lsr_saved_flags;
-#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
- unsigned char msr_saved_flags;
-};
-
-struct old_serial_port {
- unsigned int uart;
- unsigned int baud_base;
- unsigned int port;
- unsigned int irq;
- unsigned int flags;
- unsigned char hub6;
- unsigned char io_type;
- unsigned char *iomem_base;
- unsigned short iomem_reg_shift;
- unsigned long irqflags;
-};
-
-/*
- * This replaces serial_uart_config in include/linux/serial.h
- */
-struct serial8250_config {
- const char *name;
- unsigned short fifo_size;
- unsigned short tx_loadsz;
- unsigned char fcr;
- unsigned int flags;
-};
-
-#define UART_CAP_FIFO (1 << 8) /* UART has FIFO */
-#define UART_CAP_EFR (1 << 9) /* UART has EFR */
-#define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */
-#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */
-#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */
-#define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */
-
-#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
-#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
-#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */
-#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */
-
-#define PROBE_RSA (1 << 0)
-#define PROBE_ANY (~0)
-
-#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
-
-#ifdef CONFIG_SERIAL_8250_SHARE_IRQ
-#define SERIAL8250_SHARE_IRQS 1
-#else
-#define SERIAL8250_SHARE_IRQS 0
-#endif
-
-#if defined(__alpha__) && !defined(CONFIG_PCI)
-/*
- * Digital did something really horribly wrong with the OUT1 and OUT2
- * lines on at least some ALPHA's. The failure mode is that if either
- * is cleared, the machine locks up with endless interrupts.
- */
-#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1)
-#elif defined(CONFIG_SBC8560)
-/*
- * WindRiver did something similarly broken on their SBC8560 board. The
- * UART tristates its IRQ output while OUT2 is clear, but they pulled
- * the interrupt line _up_ instead of down, so if we register the IRQ
- * while the UART is in that state, we die in an IRQ storm. */
-#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
-#else
-#define ALPHA_KLUDGE_MCR 0
-#endif
--- /dev/null
+/*
+ * Driver for 8250/16550-type serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright (C) 2001 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * A note about mapbase / membase
+ *
+ * mapbase is the physical address of the IO port.
+ * membase is an 'ioremapped' cookie.
+ */
+
+#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/ratelimit.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/nmi.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "8250.h"
+
+#ifdef CONFIG_SPARC
+#include "suncore.h"
+#endif
+
+/*
+ * Configuration:
+ * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option
+ * is unsafe when used on edge-triggered interrupts.
+ */
+static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
+
+static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
+
+static struct uart_driver serial8250_reg;
+
+static int serial_index(struct uart_port *port)
+{
+ return (serial8250_reg.minor - 64) + port->line;
+}
+
+static unsigned int skip_txen_test; /* force skip of txen test at init time */
+
+/*
+ * Debugging.
+ */
+#if 0
+#define DEBUG_AUTOCONF(fmt...) printk(fmt)
+#else
+#define DEBUG_AUTOCONF(fmt...) do { } while (0)
+#endif
+
+#if 0
+#define DEBUG_INTR(fmt...) printk(fmt)
+#else
+#define DEBUG_INTR(fmt...) do { } while (0)
+#endif
+
+#define PASS_LIMIT 512
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+
+/*
+ * We default to IRQ0 for the "no irq" hack. Some
+ * machine types want others as well - they're free
+ * to redefine this in their header file.
+ */
+#define is_real_interrupt(irq) ((irq) != 0)
+
+#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
+#define CONFIG_SERIAL_DETECT_IRQ 1
+#endif
+#ifdef CONFIG_SERIAL_8250_MANY_PORTS
+#define CONFIG_SERIAL_MANY_PORTS 1
+#endif
+
+/*
+ * HUB6 is always on. This will be removed once the header
+ * files have been cleaned.
+ */
+#define CONFIG_HUB6 1
+
+#include <asm/serial.h>
+/*
+ * SERIAL_PORT_DFNS tells us about built-in ports that have no
+ * standard enumeration mechanism. Platforms that can find all
+ * serial ports via mechanisms like ACPI or PCI need not supply it.
+ */
+#ifndef SERIAL_PORT_DFNS
+#define SERIAL_PORT_DFNS
+#endif
+
+static const struct old_serial_port old_serial_port[] = {
+ SERIAL_PORT_DFNS /* defined in asm/serial.h */
+};
+
+#define UART_NR CONFIG_SERIAL_8250_NR_UARTS
+
+#ifdef CONFIG_SERIAL_8250_RSA
+
+#define PORT_RSA_MAX 4
+static unsigned long probe_rsa[PORT_RSA_MAX];
+static unsigned int probe_rsa_count;
+#endif /* CONFIG_SERIAL_8250_RSA */
+
+struct irq_info {
+ struct hlist_node node;
+ int irq;
+ spinlock_t lock; /* Protects list not the hash */
+ struct list_head *head;
+};
+
+#define NR_IRQ_HASH 32 /* Can be adjusted later */
+static struct hlist_head irq_lists[NR_IRQ_HASH];
+static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */
+
+/*
+ * Here we define the default xmit fifo size used for each type of UART.
+ */
+static const struct serial8250_config uart_config[] = {
+ [PORT_UNKNOWN] = {
+ .name = "unknown",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_8250] = {
+ .name = "8250",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16450] = {
+ .name = "16450",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16550] = {
+ .name = "16550",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16550A] = {
+ .name = "16550A",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO,
+ },
+ [PORT_CIRRUS] = {
+ .name = "Cirrus",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16650] = {
+ .name = "ST16650",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ },
+ [PORT_16650V2] = {
+ .name = "ST16650V2",
+ .fifo_size = 32,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
+ UART_FCR_T_TRIG_00,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ },
+ [PORT_16750] = {
+ .name = "TI16750",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
+ UART_FCR7_64BYTE,
+ .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE,
+ },
+ [PORT_STARTECH] = {
+ .name = "Startech",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16C950] = {
+ .name = "16C950/954",
+ .fifo_size = 128,
+ .tx_loadsz = 128,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ /* UART_CAP_EFR breaks billionon CF bluetooth card. */
+ .flags = UART_CAP_FIFO | UART_CAP_SLEEP,
+ },
+ [PORT_16654] = {
+ .name = "ST16654",
+ .fifo_size = 64,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
+ UART_FCR_T_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ },
+ [PORT_16850] = {
+ .name = "XR16850",
+ .fifo_size = 128,
+ .tx_loadsz = 128,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ },
+ [PORT_RSA] = {
+ .name = "RSA",
+ .fifo_size = 2048,
+ .tx_loadsz = 2048,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11,
+ .flags = UART_CAP_FIFO,
+ },
+ [PORT_NS16550A] = {
+ .name = "NS16550A",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_NATSEMI,
+ },
+ [PORT_XSCALE] = {
+ .name = "XScale",
+ .fifo_size = 32,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_UUE | UART_CAP_RTOIE,
+ },
+ [PORT_RM9000] = {
+ .name = "RM9000",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO,
+ },
+ [PORT_OCTEON] = {
+ .name = "OCTEON",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO,
+ },
+ [PORT_AR7] = {
+ .name = "AR7",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_U6_16550A] = {
+ .name = "U6_16550A",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_TEGRA] = {
+ .name = "Tegra",
+ .fifo_size = 32,
+ .tx_loadsz = 8,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
+ UART_FCR_T_TRIG_01,
+ .flags = UART_CAP_FIFO | UART_CAP_RTOIE,
+ },
+ [PORT_XR17D15X] = {
+ .name = "XR17D15X",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR,
+ },
+};
+
+#if defined(CONFIG_MIPS_ALCHEMY)
+
+/* Au1x00 UART hardware has a weird register layout */
+static const u8 au_io_in_map[] = {
+ [UART_RX] = 0,
+ [UART_IER] = 2,
+ [UART_IIR] = 3,
+ [UART_LCR] = 5,
+ [UART_MCR] = 6,
+ [UART_LSR] = 7,
+ [UART_MSR] = 8,
+};
+
+static const u8 au_io_out_map[] = {
+ [UART_TX] = 1,
+ [UART_IER] = 2,
+ [UART_FCR] = 4,
+ [UART_LCR] = 5,
+ [UART_MCR] = 6,
+};
+
+/* sane hardware needs no mapping */
+static inline int map_8250_in_reg(struct uart_port *p, int offset)
+{
+ if (p->iotype != UPIO_AU)
+ return offset;
+ return au_io_in_map[offset];
+}
+
+static inline int map_8250_out_reg(struct uart_port *p, int offset)
+{
+ if (p->iotype != UPIO_AU)
+ return offset;
+ return au_io_out_map[offset];
+}
+
+#elif defined(CONFIG_SERIAL_8250_RM9K)
+
+static const u8
+ regmap_in[8] = {
+ [UART_RX] = 0x00,
+ [UART_IER] = 0x0c,
+ [UART_IIR] = 0x14,
+ [UART_LCR] = 0x1c,
+ [UART_MCR] = 0x20,
+ [UART_LSR] = 0x24,
+ [UART_MSR] = 0x28,
+ [UART_SCR] = 0x2c
+ },
+ regmap_out[8] = {
+ [UART_TX] = 0x04,
+ [UART_IER] = 0x0c,
+ [UART_FCR] = 0x18,
+ [UART_LCR] = 0x1c,
+ [UART_MCR] = 0x20,
+ [UART_LSR] = 0x24,
+ [UART_MSR] = 0x28,
+ [UART_SCR] = 0x2c
+ };
+
+static inline int map_8250_in_reg(struct uart_port *p, int offset)
+{
+ if (p->iotype != UPIO_RM9000)
+ return offset;
+ return regmap_in[offset];
+}
+
+static inline int map_8250_out_reg(struct uart_port *p, int offset)
+{
+ if (p->iotype != UPIO_RM9000)
+ return offset;
+ return regmap_out[offset];
+}
+
+#else
+
+/* sane hardware needs no mapping */
+#define map_8250_in_reg(up, offset) (offset)
+#define map_8250_out_reg(up, offset) (offset)
+
+#endif
+
+static unsigned int hub6_serial_in(struct uart_port *p, int offset)
+{
+ offset = map_8250_in_reg(p, offset) << p->regshift;
+ outb(p->hub6 - 1 + offset, p->iobase);
+ return inb(p->iobase + 1);
+}
+
+static void hub6_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = map_8250_out_reg(p, offset) << p->regshift;
+ outb(p->hub6 - 1 + offset, p->iobase);
+ outb(value, p->iobase + 1);
+}
+
+static unsigned int mem_serial_in(struct uart_port *p, int offset)
+{
+ offset = map_8250_in_reg(p, offset) << p->regshift;
+ return readb(p->membase + offset);
+}
+
+static void mem_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = map_8250_out_reg(p, offset) << p->regshift;
+ writeb(value, p->membase + offset);
+}
+
+static void mem32_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = map_8250_out_reg(p, offset) << p->regshift;
+ writel(value, p->membase + offset);
+}
+
+static unsigned int mem32_serial_in(struct uart_port *p, int offset)
+{
+ offset = map_8250_in_reg(p, offset) << p->regshift;
+ return readl(p->membase + offset);
+}
+
+static unsigned int au_serial_in(struct uart_port *p, int offset)
+{
+ offset = map_8250_in_reg(p, offset) << p->regshift;
+ return __raw_readl(p->membase + offset);
+}
+
+static void au_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = map_8250_out_reg(p, offset) << p->regshift;
+ __raw_writel(value, p->membase + offset);
+}
+
+static unsigned int io_serial_in(struct uart_port *p, int offset)
+{
+ offset = map_8250_in_reg(p, offset) << p->regshift;
+ return inb(p->iobase + offset);
+}
+
+static void io_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = map_8250_out_reg(p, offset) << p->regshift;
+ outb(value, p->iobase + offset);
+}
+
+static int serial8250_default_handle_irq(struct uart_port *port);
+
+static void set_io_from_upio(struct uart_port *p)
+{
+ struct uart_8250_port *up =
+ container_of(p, struct uart_8250_port, port);
+ switch (p->iotype) {
+ case UPIO_HUB6:
+ p->serial_in = hub6_serial_in;
+ p->serial_out = hub6_serial_out;
+ break;
+
+ case UPIO_MEM:
+ p->serial_in = mem_serial_in;
+ p->serial_out = mem_serial_out;
+ break;
+
+ case UPIO_RM9000:
+ case UPIO_MEM32:
+ p->serial_in = mem32_serial_in;
+ p->serial_out = mem32_serial_out;
+ break;
+
+ case UPIO_AU:
+ p->serial_in = au_serial_in;
+ p->serial_out = au_serial_out;
+ break;
+
+ default:
+ p->serial_in = io_serial_in;
+ p->serial_out = io_serial_out;
+ break;
+ }
+ /* Remember loaded iotype */
+ up->cur_iotype = p->iotype;
+ p->handle_irq = serial8250_default_handle_irq;
+}
+
+static void
+serial_out_sync(struct uart_8250_port *up, int offset, int value)
+{
+ struct uart_port *p = &up->port;
+ switch (p->iotype) {
+ case UPIO_MEM:
+ case UPIO_MEM32:
+ case UPIO_AU:
+ p->serial_out(p, offset, value);
+ p->serial_in(p, UART_LCR); /* safe, no side-effects */
+ break;
+ default:
+ p->serial_out(p, offset, value);
+ }
+}
+
+#define serial_in(up, offset) \
+ (up->port.serial_in(&(up)->port, (offset)))
+#define serial_out(up, offset, value) \
+ (up->port.serial_out(&(up)->port, (offset), (value)))
+/*
+ * We used to support using pause I/O for certain machines. We
+ * haven't supported this for a while, but just in case it's badly
+ * needed for certain old 386 machines, I've left these #define's
+ * in....
+ */
+#define serial_inp(up, offset) serial_in(up, offset)
+#define serial_outp(up, offset, value) serial_out(up, offset, value)
+
+/* Uart divisor latch read */
+static inline int _serial_dl_read(struct uart_8250_port *up)
+{
+ return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8;
+}
+
+/* Uart divisor latch write */
+static inline void _serial_dl_write(struct uart_8250_port *up, int value)
+{
+ serial_outp(up, UART_DLL, value & 0xff);
+ serial_outp(up, UART_DLM, value >> 8 & 0xff);
+}
+
+#if defined(CONFIG_MIPS_ALCHEMY)
+/* Au1x00 haven't got a standard divisor latch */
+static int serial_dl_read(struct uart_8250_port *up)
+{
+ if (up->port.iotype == UPIO_AU)
+ return __raw_readl(up->port.membase + 0x28);
+ else
+ return _serial_dl_read(up);
+}
+
+static void serial_dl_write(struct uart_8250_port *up, int value)
+{
+ if (up->port.iotype == UPIO_AU)
+ __raw_writel(value, up->port.membase + 0x28);
+ else
+ _serial_dl_write(up, value);
+}
+#elif defined(CONFIG_SERIAL_8250_RM9K)
+static int serial_dl_read(struct uart_8250_port *up)
+{
+ return (up->port.iotype == UPIO_RM9000) ?
+ (((__raw_readl(up->port.membase + 0x10) << 8) |
+ (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff) :
+ _serial_dl_read(up);
+}
+
+static void serial_dl_write(struct uart_8250_port *up, int value)
+{
+ if (up->port.iotype == UPIO_RM9000) {
+ __raw_writel(value, up->port.membase + 0x08);
+ __raw_writel(value >> 8, up->port.membase + 0x10);
+ } else {
+ _serial_dl_write(up, value);
+ }
+}
+#else
+#define serial_dl_read(up) _serial_dl_read(up)
+#define serial_dl_write(up, value) _serial_dl_write(up, value)
+#endif
+
+/*
+ * For the 16C950
+ */
+static void serial_icr_write(struct uart_8250_port *up, int offset, int value)
+{
+ serial_out(up, UART_SCR, offset);
+ serial_out(up, UART_ICR, value);
+}
+
+static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
+{
+ unsigned int value;
+
+ serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
+ serial_out(up, UART_SCR, offset);
+ value = serial_in(up, UART_ICR);
+ serial_icr_write(up, UART_ACR, up->acr);
+
+ return value;
+}
+
+/*
+ * FIFO support.
+ */
+static void serial8250_clear_fifos(struct uart_8250_port *p)
+{
+ if (p->capabilities & UART_CAP_FIFO) {
+ serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_outp(p, UART_FCR, 0);
+ }
+}
+
+/*
+ * IER sleep support. UARTs which have EFRs need the "extended
+ * capability" bit enabled. Note that on XR16C850s, we need to
+ * reset LCR to write to IER.
+ */
+static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
+{
+ if (p->capabilities & UART_CAP_SLEEP) {
+ if (p->capabilities & UART_CAP_EFR) {
+ serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_outp(p, UART_EFR, UART_EFR_ECB);
+ serial_outp(p, UART_LCR, 0);
+ }
+ serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0);
+ if (p->capabilities & UART_CAP_EFR) {
+ serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_outp(p, UART_EFR, 0);
+ serial_outp(p, UART_LCR, 0);
+ }
+ }
+}
+
+#ifdef CONFIG_SERIAL_8250_RSA
+/*
+ * Attempts to turn on the RSA FIFO. Returns zero on failure.
+ * We set the port uart clock rate if we succeed.
+ */
+static int __enable_rsa(struct uart_8250_port *up)
+{
+ unsigned char mode;
+ int result;
+
+ mode = serial_inp(up, UART_RSA_MSR);
+ result = mode & UART_RSA_MSR_FIFO;
+
+ if (!result) {
+ serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
+ mode = serial_inp(up, UART_RSA_MSR);
+ result = mode & UART_RSA_MSR_FIFO;
+ }
+
+ if (result)
+ up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
+
+ return result;
+}
+
+static void enable_rsa(struct uart_8250_port *up)
+{
+ if (up->port.type == PORT_RSA) {
+ if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
+ spin_lock_irq(&up->port.lock);
+ __enable_rsa(up);
+ spin_unlock_irq(&up->port.lock);
+ }
+ if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
+ serial_outp(up, UART_RSA_FRR, 0);
+ }
+}
+
+/*
+ * Attempts to turn off the RSA FIFO. Returns zero on failure.
+ * It is unknown why interrupts were disabled in here. However,
+ * the caller is expected to preserve this behaviour by grabbing
+ * the spinlock before calling this function.
+ */
+static void disable_rsa(struct uart_8250_port *up)
+{
+ unsigned char mode;
+ int result;
+
+ if (up->port.type == PORT_RSA &&
+ up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
+ spin_lock_irq(&up->port.lock);
+
+ mode = serial_inp(up, UART_RSA_MSR);
+ result = !(mode & UART_RSA_MSR_FIFO);
+
+ if (!result) {
+ serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
+ mode = serial_inp(up, UART_RSA_MSR);
+ result = !(mode & UART_RSA_MSR_FIFO);
+ }
+
+ if (result)
+ up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
+ spin_unlock_irq(&up->port.lock);
+ }
+}
+#endif /* CONFIG_SERIAL_8250_RSA */
+
+/*
+ * This is a quickie test to see how big the FIFO is.
+ * It doesn't work at all the time, more's the pity.
+ */
+static int size_fifo(struct uart_8250_port *up)
+{
+ unsigned char old_fcr, old_mcr, old_lcr;
+ unsigned short old_dl;
+ int count;
+
+ old_lcr = serial_inp(up, UART_LCR);
+ serial_outp(up, UART_LCR, 0);
+ old_fcr = serial_inp(up, UART_FCR);
+ old_mcr = serial_inp(up, UART_MCR);
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_outp(up, UART_MCR, UART_MCR_LOOP);
+ serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A);
+ old_dl = serial_dl_read(up);
+ serial_dl_write(up, 0x0001);
+ serial_outp(up, UART_LCR, 0x03);
+ for (count = 0; count < 256; count++)
+ serial_outp(up, UART_TX, count);
+ mdelay(20);/* FIXME - schedule_timeout */
+ for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) &&
+ (count < 256); count++)
+ serial_inp(up, UART_RX);
+ serial_outp(up, UART_FCR, old_fcr);
+ serial_outp(up, UART_MCR, old_mcr);
+ serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A);
+ serial_dl_write(up, old_dl);
+ serial_outp(up, UART_LCR, old_lcr);
+
+ return count;
+}
+
+/*
+ * Read UART ID using the divisor method - set DLL and DLM to zero
+ * and the revision will be in DLL and device type in DLM. We
+ * preserve the device state across this.
+ */
+static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
+{
+ unsigned char old_dll, old_dlm, old_lcr;
+ unsigned int id;
+
+ old_lcr = serial_inp(p, UART_LCR);
+ serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_A);
+
+ old_dll = serial_inp(p, UART_DLL);
+ old_dlm = serial_inp(p, UART_DLM);
+
+ serial_outp(p, UART_DLL, 0);
+ serial_outp(p, UART_DLM, 0);
+
+ id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
+
+ serial_outp(p, UART_DLL, old_dll);
+ serial_outp(p, UART_DLM, old_dlm);
+ serial_outp(p, UART_LCR, old_lcr);
+
+ return id;
+}
+
+/*
+ * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's.
+ * When this function is called we know it is at least a StarTech
+ * 16650 V2, but it might be one of several StarTech UARTs, or one of
+ * its clones. (We treat the broken original StarTech 16650 V1 as a
+ * 16550, and why not? Startech doesn't seem to even acknowledge its
+ * existence.)
+ *
+ * What evil have men's minds wrought...
+ */
+static void autoconfig_has_efr(struct uart_8250_port *up)
+{
+ unsigned int id1, id2, id3, rev;
+
+ /*
+ * Everything with an EFR has SLEEP
+ */
+ up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
+
+ /*
+ * First we check to see if it's an Oxford Semiconductor UART.
+ *
+ * If we have to do this here because some non-National
+ * Semiconductor clone chips lock up if you try writing to the
+ * LSR register (which serial_icr_read does)
+ */
+
+ /*
+ * Check for Oxford Semiconductor 16C950.
+ *
+ * EFR [4] must be set else this test fails.
+ *
+ * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca)
+ * claims that it's needed for 952 dual UART's (which are not
+ * recommended for new designs).
+ */
+ up->acr = 0;
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_out(up, UART_EFR, UART_EFR_ECB);
+ serial_out(up, UART_LCR, 0x00);
+ id1 = serial_icr_read(up, UART_ID1);
+ id2 = serial_icr_read(up, UART_ID2);
+ id3 = serial_icr_read(up, UART_ID3);
+ rev = serial_icr_read(up, UART_REV);
+
+ DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev);
+
+ if (id1 == 0x16 && id2 == 0xC9 &&
+ (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) {
+ up->port.type = PORT_16C950;
+
+ /*
+ * Enable work around for the Oxford Semiconductor 952 rev B
+ * chip which causes it to seriously miscalculate baud rates
+ * when DLL is 0.
+ */
+ if (id3 == 0x52 && rev == 0x01)
+ up->bugs |= UART_BUG_QUOT;
+ return;
+ }
+
+ /*
+ * We check for a XR16C850 by setting DLL and DLM to 0, and then
+ * reading back DLL and DLM. The chip type depends on the DLM
+ * value read back:
+ * 0x10 - XR16C850 and the DLL contains the chip revision.
+ * 0x12 - XR16C2850.
+ * 0x14 - XR16C854.
+ */
+ id1 = autoconfig_read_divisor_id(up);
+ DEBUG_AUTOCONF("850id=%04x ", id1);
+
+ id2 = id1 >> 8;
+ if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) {
+ up->port.type = PORT_16850;
+ return;
+ }
+
+ /*
+ * It wasn't an XR16C850.
+ *
+ * We distinguish between the '654 and the '650 by counting
+ * how many bytes are in the FIFO. I'm using this for now,
+ * since that's the technique that was sent to me in the
+ * serial driver update, but I'm not convinced this works.
+ * I've had problems doing this in the past. -TYT
+ */
+ if (size_fifo(up) == 64)
+ up->port.type = PORT_16654;
+ else
+ up->port.type = PORT_16650V2;
+}
+
+/*
+ * We detected a chip without a FIFO. Only two fall into
+ * this category - the original 8250 and the 16450. The
+ * 16450 has a scratch register (accessible with LCR=0)
+ */
+static void autoconfig_8250(struct uart_8250_port *up)
+{
+ unsigned char scratch, status1, status2;
+
+ up->port.type = PORT_8250;
+
+ scratch = serial_in(up, UART_SCR);
+ serial_outp(up, UART_SCR, 0xa5);
+ status1 = serial_in(up, UART_SCR);
+ serial_outp(up, UART_SCR, 0x5a);
+ status2 = serial_in(up, UART_SCR);
+ serial_outp(up, UART_SCR, scratch);
+
+ if (status1 == 0xa5 && status2 == 0x5a)
+ up->port.type = PORT_16450;
+}
+
+static int broken_efr(struct uart_8250_port *up)
+{
+ /*
+ * Exar ST16C2550 "A2" devices incorrectly detect as
+ * having an EFR, and report an ID of 0x0201. See
+ * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
+ */
+ if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
+ return 1;
+
+ return 0;
+}
+
+static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
+{
+ unsigned char status;
+
+ status = serial_in(up, 0x04); /* EXCR2 */
+#define PRESL(x) ((x) & 0x30)
+ if (PRESL(status) == 0x10) {
+ /* already in high speed mode */
+ return 0;
+ } else {
+ status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
+ status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
+ serial_outp(up, 0x04, status);
+ }
+ return 1;
+}
+
+/*
+ * We know that the chip has FIFOs. Does it have an EFR? The
+ * EFR is located in the same register position as the IIR and
+ * we know the top two bits of the IIR are currently set. The
+ * EFR should contain zero. Try to read the EFR.
+ */
+static void autoconfig_16550a(struct uart_8250_port *up)
+{
+ unsigned char status1, status2;
+ unsigned int iersave;
+
+ up->port.type = PORT_16550A;
+ up->capabilities |= UART_CAP_FIFO;
+
+ /*
+ * Check for presence of the EFR when DLAB is set.
+ * Only ST16C650V1 UARTs pass this test.
+ */
+ serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A);
+ if (serial_in(up, UART_EFR) == 0) {
+ serial_outp(up, UART_EFR, 0xA8);
+ if (serial_in(up, UART_EFR) != 0) {
+ DEBUG_AUTOCONF("EFRv1 ");
+ up->port.type = PORT_16650;
+ up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
+ } else {
+ DEBUG_AUTOCONF("Motorola 8xxx DUART ");
+ }
+ serial_outp(up, UART_EFR, 0);
+ return;
+ }
+
+ /*
+ * Maybe it requires 0xbf to be written to the LCR.
+ * (other ST16C650V2 UARTs, TI16C752A, etc)
+ */
+ serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
+ if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) {
+ DEBUG_AUTOCONF("EFRv2 ");
+ autoconfig_has_efr(up);
+ return;
+ }
+
+ /*
+ * Check for a National Semiconductor SuperIO chip.
+ * Attempt to switch to bank 2, read the value of the LOOP bit
+ * from EXCR1. Switch back to bank 0, change it in MCR. Then
+ * switch back to bank 2, read it from EXCR1 again and check
+ * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2
+ */
+ serial_outp(up, UART_LCR, 0);
+ status1 = serial_in(up, UART_MCR);
+ serial_outp(up, UART_LCR, 0xE0);
+ status2 = serial_in(up, 0x02); /* EXCR1 */
+
+ if (!((status2 ^ status1) & UART_MCR_LOOP)) {
+ serial_outp(up, UART_LCR, 0);
+ serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP);
+ serial_outp(up, UART_LCR, 0xE0);
+ status2 = serial_in(up, 0x02); /* EXCR1 */
+ serial_outp(up, UART_LCR, 0);
+ serial_outp(up, UART_MCR, status1);
+
+ if ((status2 ^ status1) & UART_MCR_LOOP) {
+ unsigned short quot;
+
+ serial_outp(up, UART_LCR, 0xE0);
+
+ quot = serial_dl_read(up);
+ quot <<= 3;
+
+ if (ns16550a_goto_highspeed(up))
+ serial_dl_write(up, quot);
+
+ serial_outp(up, UART_LCR, 0);
+
+ up->port.uartclk = 921600*16;
+ up->port.type = PORT_NS16550A;
+ up->capabilities |= UART_NATSEMI;
+ return;
+ }
+ }
+
+ /*
+ * No EFR. Try to detect a TI16750, which only sets bit 5 of
+ * the IIR when 64 byte FIFO mode is enabled when DLAB is set.
+ * Try setting it with and without DLAB set. Cheap clones
+ * set bit 5 without DLAB set.
+ */
+ serial_outp(up, UART_LCR, 0);
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
+ status1 = serial_in(up, UART_IIR) >> 5;
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A);
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
+ status2 = serial_in(up, UART_IIR) >> 5;
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_outp(up, UART_LCR, 0);
+
+ DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2);
+
+ if (status1 == 6 && status2 == 7) {
+ up->port.type = PORT_16750;
+ up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP;
+ return;
+ }
+
+ /*
+ * Try writing and reading the UART_IER_UUE bit (b6).
+ * If it works, this is probably one of the Xscale platform's
+ * internal UARTs.
+ * We're going to explicitly set the UUE bit to 0 before
+ * trying to write and read a 1 just to make sure it's not
+ * already a 1 and maybe locked there before we even start start.
+ */
+ iersave = serial_in(up, UART_IER);
+ serial_outp(up, UART_IER, iersave & ~UART_IER_UUE);
+ if (!(serial_in(up, UART_IER) & UART_IER_UUE)) {
+ /*
+ * OK it's in a known zero state, try writing and reading
+ * without disturbing the current state of the other bits.
+ */
+ serial_outp(up, UART_IER, iersave | UART_IER_UUE);
+ if (serial_in(up, UART_IER) & UART_IER_UUE) {
+ /*
+ * It's an Xscale.
+ * We'll leave the UART_IER_UUE bit set to 1 (enabled).
+ */
+ DEBUG_AUTOCONF("Xscale ");
+ up->port.type = PORT_XSCALE;
+ up->capabilities |= UART_CAP_UUE | UART_CAP_RTOIE;
+ return;
+ }
+ } else {
+ /*
+ * If we got here we couldn't force the IER_UUE bit to 0.
+ * Log it and continue.
+ */
+ DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
+ }
+ serial_outp(up, UART_IER, iersave);
+
+ /*
+ * Exar uarts have EFR in a weird location
+ */
+ if (up->port.flags & UPF_EXAR_EFR) {
+ up->port.type = PORT_XR17D15X;
+ up->capabilities |= UART_CAP_AFE | UART_CAP_EFR;
+ }
+
+ /*
+ * We distinguish between 16550A and U6 16550A by counting
+ * how many bytes are in the FIFO.
+ */
+ if (up->port.type == PORT_16550A && size_fifo(up) == 64) {
+ up->port.type = PORT_U6_16550A;
+ up->capabilities |= UART_CAP_AFE;
+ }
+}
+
+/*
+ * This routine is called by rs_init() to initialize a specific serial
+ * port. It determines what type of UART chip this serial port is
+ * using: 8250, 16450, 16550, 16550A. The important question is
+ * whether or not this UART is a 16550A or not, since this will
+ * determine whether or not we can use its FIFO features or not.
+ */
+static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
+{
+ unsigned char status1, scratch, scratch2, scratch3;
+ unsigned char save_lcr, save_mcr;
+ unsigned long flags;
+
+ if (!up->port.iobase && !up->port.mapbase && !up->port.membase)
+ return;
+
+ DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ",
+ serial_index(&up->port), up->port.iobase, up->port.membase);
+
+ /*
+ * We really do need global IRQs disabled here - we're going to
+ * be frobbing the chips IRQ enable register to see if it exists.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ up->capabilities = 0;
+ up->bugs = 0;
+
+ if (!(up->port.flags & UPF_BUGGY_UART)) {
+ /*
+ * Do a simple existence test first; if we fail this,
+ * there's no point trying anything else.
+ *
+ * 0x80 is used as a nonsense port to prevent against
+ * false positives due to ISA bus float. The
+ * assumption is that 0x80 is a non-existent port;
+ * which should be safe since include/asm/io.h also
+ * makes this assumption.
+ *
+ * Note: this is safe as long as MCR bit 4 is clear
+ * and the device is in "PC" mode.
+ */
+ scratch = serial_inp(up, UART_IER);
+ serial_outp(up, UART_IER, 0);
+#ifdef __i386__
+ outb(0xff, 0x080);
+#endif
+ /*
+ * Mask out IER[7:4] bits for test as some UARTs (e.g. TL
+ * 16C754B) allow only to modify them if an EFR bit is set.
+ */
+ scratch2 = serial_inp(up, UART_IER) & 0x0f;
+ serial_outp(up, UART_IER, 0x0F);
+#ifdef __i386__
+ outb(0, 0x080);
+#endif
+ scratch3 = serial_inp(up, UART_IER) & 0x0f;
+ serial_outp(up, UART_IER, scratch);
+ if (scratch2 != 0 || scratch3 != 0x0F) {
+ /*
+ * We failed; there's nothing here
+ */
+ DEBUG_AUTOCONF("IER test failed (%02x, %02x) ",
+ scratch2, scratch3);
+ goto out;
+ }
+ }
+
+ save_mcr = serial_in(up, UART_MCR);
+ save_lcr = serial_in(up, UART_LCR);
+
+ /*
+ * Check to see if a UART is really there. Certain broken
+ * internal modems based on the Rockwell chipset fail this
+ * test, because they apparently don't implement the loopback
+ * test mode. So this test is skipped on the COM 1 through
+ * COM 4 ports. This *should* be safe, since no board
+ * manufacturer would be stupid enough to design a board
+ * that conflicts with COM 1-4 --- we hope!
+ */
+ if (!(up->port.flags & UPF_SKIP_TEST)) {
+ serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
+ status1 = serial_inp(up, UART_MSR) & 0xF0;
+ serial_outp(up, UART_MCR, save_mcr);
+ if (status1 != 0x90) {
+ DEBUG_AUTOCONF("LOOP test failed (%02x) ",
+ status1);
+ goto out;
+ }
+ }
+
+ /*
+ * We're pretty sure there's a port here. Lets find out what
+ * type of port it is. The IIR top two bits allows us to find
+ * out if it's 8250 or 16450, 16550, 16550A or later. This
+ * determines what we test for next.
+ *
+ * We also initialise the EFR (if any) to zero for later. The
+ * EFR occupies the same register location as the FCR and IIR.
+ */
+ serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_outp(up, UART_EFR, 0);
+ serial_outp(up, UART_LCR, 0);
+
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ scratch = serial_in(up, UART_IIR) >> 6;
+
+ DEBUG_AUTOCONF("iir=%d ", scratch);
+
+ switch (scratch) {
+ case 0:
+ autoconfig_8250(up);
+ break;
+ case 1:
+ up->port.type = PORT_UNKNOWN;
+ break;
+ case 2:
+ up->port.type = PORT_16550;
+ break;
+ case 3:
+ autoconfig_16550a(up);
+ break;
+ }
+
+#ifdef CONFIG_SERIAL_8250_RSA
+ /*
+ * Only probe for RSA ports if we got the region.
+ */
+ if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) {
+ int i;
+
+ for (i = 0 ; i < probe_rsa_count; ++i) {
+ if (probe_rsa[i] == up->port.iobase &&
+ __enable_rsa(up)) {
+ up->port.type = PORT_RSA;
+ break;
+ }
+ }
+ }
+#endif
+
+ serial_outp(up, UART_LCR, save_lcr);
+
+ if (up->capabilities != uart_config[up->port.type].flags) {
+ printk(KERN_WARNING
+ "ttyS%d: detected caps %08x should be %08x\n",
+ serial_index(&up->port), up->capabilities,
+ uart_config[up->port.type].flags);
+ }
+
+ up->port.fifosize = uart_config[up->port.type].fifo_size;
+ up->capabilities = uart_config[up->port.type].flags;
+ up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
+
+ if (up->port.type == PORT_UNKNOWN)
+ goto out;
+
+ /*
+ * Reset the UART.
+ */
+#ifdef CONFIG_SERIAL_8250_RSA
+ if (up->port.type == PORT_RSA)
+ serial_outp(up, UART_RSA_FRR, 0);
+#endif
+ serial_outp(up, UART_MCR, save_mcr);
+ serial8250_clear_fifos(up);
+ serial_in(up, UART_RX);
+ if (up->capabilities & UART_CAP_UUE)
+ serial_outp(up, UART_IER, UART_IER_UUE);
+ else
+ serial_outp(up, UART_IER, 0);
+
+ out:
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name);
+}
+
+static void autoconfig_irq(struct uart_8250_port *up)
+{
+ unsigned char save_mcr, save_ier;
+ unsigned char save_ICP = 0;
+ unsigned int ICP = 0;
+ unsigned long irqs;
+ int irq;
+
+ if (up->port.flags & UPF_FOURPORT) {
+ ICP = (up->port.iobase & 0xfe0) | 0x1f;
+ save_ICP = inb_p(ICP);
+ outb_p(0x80, ICP);
+ (void) inb_p(ICP);
+ }
+
+ /* forget possible initially masked and pending IRQ */
+ probe_irq_off(probe_irq_on());
+ save_mcr = serial_inp(up, UART_MCR);
+ save_ier = serial_inp(up, UART_IER);
+ serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
+
+ irqs = probe_irq_on();
+ serial_outp(up, UART_MCR, 0);
+ udelay(10);
+ if (up->port.flags & UPF_FOURPORT) {
+ serial_outp(up, UART_MCR,
+ UART_MCR_DTR | UART_MCR_RTS);
+ } else {
+ serial_outp(up, UART_MCR,
+ UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
+ }
+ serial_outp(up, UART_IER, 0x0f); /* enable all intrs */
+ (void)serial_inp(up, UART_LSR);
+ (void)serial_inp(up, UART_RX);
+ (void)serial_inp(up, UART_IIR);
+ (void)serial_inp(up, UART_MSR);
+ serial_outp(up, UART_TX, 0xFF);
+ udelay(20);
+ irq = probe_irq_off(irqs);
+
+ serial_outp(up, UART_MCR, save_mcr);
+ serial_outp(up, UART_IER, save_ier);
+
+ if (up->port.flags & UPF_FOURPORT)
+ outb_p(save_ICP, ICP);
+
+ up->port.irq = (irq > 0) ? irq : 0;
+}
+
+static inline void __stop_tx(struct uart_8250_port *p)
+{
+ if (p->ier & UART_IER_THRI) {
+ p->ier &= ~UART_IER_THRI;
+ serial_out(p, UART_IER, p->ier);
+ }
+}
+
+static void serial8250_stop_tx(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ __stop_tx(up);
+
+ /*
+ * We really want to stop the transmitter from sending.
+ */
+ if (up->port.type == PORT_16C950) {
+ up->acr |= UART_ACR_TXDIS;
+ serial_icr_write(up, UART_ACR, up->acr);
+ }
+}
+
+static void serial8250_start_tx(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+
+ if (up->bugs & UART_BUG_TXEN) {
+ unsigned char lsr;
+ lsr = serial_in(up, UART_LSR);
+ up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+ if ((up->port.type == PORT_RM9000) ?
+ (lsr & UART_LSR_THRE) :
+ (lsr & UART_LSR_TEMT))
+ serial8250_tx_chars(up);
+ }
+ }
+
+ /*
+ * Re-enable the transmitter if we disabled it.
+ */
+ if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
+ up->acr &= ~UART_ACR_TXDIS;
+ serial_icr_write(up, UART_ACR, up->acr);
+ }
+}
+
+static void serial8250_stop_rx(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static void serial8250_enable_ms(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ /* no MSR capabilities */
+ if (up->bugs & UART_BUG_NOMSR)
+ return;
+
+ up->ier |= UART_IER_MSI;
+ serial_out(up, UART_IER, up->ier);
+}
+
+/*
+ * Clear the Tegra rx fifo after a break
+ *
+ * FIXME: This needs to become a port specific callback once we have a
+ * framework for this
+ */
+static void clear_rx_fifo(struct uart_8250_port *up)
+{
+ unsigned int status, tmout = 10000;
+ do {
+ status = serial_in(up, UART_LSR);
+ if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))
+ status = serial_in(up, UART_RX);
+ else
+ break;
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while (1);
+}
+
+/*
+ * serial8250_rx_chars: processes according to the passed in LSR
+ * value, and returns the remaining LSR bits not handled
+ * by this Rx routine.
+ */
+unsigned char
+serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
+{
+ struct tty_struct *tty = up->port.state->port.tty;
+ unsigned char ch;
+ int max_count = 256;
+ char flag;
+
+ do {
+ if (likely(lsr & UART_LSR_DR))
+ ch = serial_inp(up, UART_RX);
+ else
+ /*
+ * Intel 82571 has a Serial Over Lan device that will
+ * set UART_LSR_BI without setting UART_LSR_DR when
+ * it receives a break. To avoid reading from the
+ * receive buffer without UART_LSR_DR bit set, we
+ * just force the read character to be 0
+ */
+ ch = 0;
+
+ flag = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ lsr |= up->lsr_saved_flags;
+ up->lsr_saved_flags = 0;
+
+ if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
+ /*
+ * For statistics only
+ */
+ if (lsr & UART_LSR_BI) {
+ lsr &= ~(UART_LSR_FE | UART_LSR_PE);
+ up->port.icount.brk++;
+ /*
+ * If tegra port then clear the rx fifo to
+ * accept another break/character.
+ */
+ if (up->port.type == PORT_TEGRA)
+ clear_rx_fifo(up);
+
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ goto ignore_char;
+ } else if (lsr & UART_LSR_PE)
+ up->port.icount.parity++;
+ else if (lsr & UART_LSR_FE)
+ up->port.icount.frame++;
+ if (lsr & UART_LSR_OE)
+ up->port.icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ignored.
+ */
+ lsr &= up->port.read_status_mask;
+
+ if (lsr & UART_LSR_BI) {
+ DEBUG_INTR("handling break....");
+ flag = TTY_BREAK;
+ } else if (lsr & UART_LSR_PE)
+ flag = TTY_PARITY;
+ else if (lsr & UART_LSR_FE)
+ flag = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(&up->port, ch))
+ goto ignore_char;
+
+ uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
+
+ignore_char:
+ lsr = serial_inp(up, UART_LSR);
+ } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0));
+ spin_unlock(&up->port.lock);
+ tty_flip_buffer_push(tty);
+ spin_lock(&up->port.lock);
+ return lsr;
+}
+EXPORT_SYMBOL_GPL(serial8250_rx_chars);
+
+void serial8250_tx_chars(struct uart_8250_port *up)
+{
+ struct circ_buf *xmit = &up->port.state->xmit;
+ int count;
+
+ if (up->port.x_char) {
+ serial_outp(up, UART_TX, up->port.x_char);
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+ if (uart_tx_stopped(&up->port)) {
+ serial8250_stop_tx(&up->port);
+ return;
+ }
+ if (uart_circ_empty(xmit)) {
+ __stop_tx(up);
+ return;
+ }
+
+ count = up->tx_loadsz;
+ do {
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ DEBUG_INTR("THRE...");
+
+ if (uart_circ_empty(xmit))
+ __stop_tx(up);
+}
+EXPORT_SYMBOL_GPL(serial8250_tx_chars);
+
+unsigned int serial8250_modem_status(struct uart_8250_port *up)
+{
+ unsigned int status = serial_in(up, UART_MSR);
+
+ status |= up->msr_saved_flags;
+ up->msr_saved_flags = 0;
+ if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
+ up->port.state != NULL) {
+ if (status & UART_MSR_TERI)
+ up->port.icount.rng++;
+ if (status & UART_MSR_DDSR)
+ up->port.icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
+ if (status & UART_MSR_DCTS)
+ uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
+
+ wake_up_interruptible(&up->port.state->port.delta_msr_wait);
+ }
+
+ return status;
+}
+EXPORT_SYMBOL_GPL(serial8250_modem_status);
+
+/*
+ * This handles the interrupt from one port.
+ */
+int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
+{
+ unsigned char status;
+ unsigned long flags;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ if (iir & UART_IIR_NO_INT)
+ return 0;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ status = serial_inp(up, UART_LSR);
+
+ DEBUG_INTR("status = %x...", status);
+
+ if (status & (UART_LSR_DR | UART_LSR_BI))
+ status = serial8250_rx_chars(up, status);
+ serial8250_modem_status(up);
+ if (status & UART_LSR_THRE)
+ serial8250_tx_chars(up);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return 1;
+}
+EXPORT_SYMBOL_GPL(serial8250_handle_irq);
+
+static int serial8250_default_handle_irq(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned int iir = serial_in(up, UART_IIR);
+
+ return serial8250_handle_irq(port, iir);
+}
+
+/*
+ * This is the serial driver's interrupt routine.
+ *
+ * Arjan thinks the old way was overly complex, so it got simplified.
+ * Alan disagrees, saying that need the complexity to handle the weird
+ * nature of ISA shared interrupts. (This is a special exception.)
+ *
+ * In order to handle ISA shared interrupts properly, we need to check
+ * that all ports have been serviced, and therefore the ISA interrupt
+ * line has been de-asserted.
+ *
+ * This means we need to loop through all ports. checking that they
+ * don't have an interrupt pending.
+ */
+static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
+{
+ struct irq_info *i = dev_id;
+ struct list_head *l, *end = NULL;
+ int pass_counter = 0, handled = 0;
+
+ DEBUG_INTR("serial8250_interrupt(%d)...", irq);
+
+ spin_lock(&i->lock);
+
+ l = i->head;
+ do {
+ struct uart_8250_port *up;
+ struct uart_port *port;
+ bool skip;
+
+ up = list_entry(l, struct uart_8250_port, list);
+ port = &up->port;
+ skip = pass_counter && up->port.flags & UPF_IIR_ONCE;
+
+ if (!skip && port->handle_irq(port)) {
+ handled = 1;
+ end = NULL;
+ } else if (end == NULL)
+ end = l;
+
+ l = l->next;
+
+ if (l == i->head && pass_counter++ > PASS_LIMIT) {
+ /* If we hit this, we're dead. */
+ printk_ratelimited(KERN_ERR
+ "serial8250: too much work for irq%d\n", irq);
+ break;
+ }
+ } while (l != end);
+
+ spin_unlock(&i->lock);
+
+ DEBUG_INTR("end.\n");
+
+ return IRQ_RETVAL(handled);
+}
+
+/*
+ * To support ISA shared interrupts, we need to have one interrupt
+ * handler that ensures that the IRQ line has been deasserted
+ * before returning. Failing to do this will result in the IRQ
+ * line being stuck active, and, since ISA irqs are edge triggered,
+ * no more IRQs will be seen.
+ */
+static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up)
+{
+ spin_lock_irq(&i->lock);
+
+ if (!list_empty(i->head)) {
+ if (i->head == &up->list)
+ i->head = i->head->next;
+ list_del(&up->list);
+ } else {
+ BUG_ON(i->head != &up->list);
+ i->head = NULL;
+ }
+ spin_unlock_irq(&i->lock);
+ /* List empty so throw away the hash node */
+ if (i->head == NULL) {
+ hlist_del(&i->node);
+ kfree(i);
+ }
+}
+
+static int serial_link_irq_chain(struct uart_8250_port *up)
+{
+ struct hlist_head *h;
+ struct hlist_node *n;
+ struct irq_info *i;
+ int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
+
+ mutex_lock(&hash_mutex);
+
+ h = &irq_lists[up->port.irq % NR_IRQ_HASH];
+
+ hlist_for_each(n, h) {
+ i = hlist_entry(n, struct irq_info, node);
+ if (i->irq == up->port.irq)
+ break;
+ }
+
+ if (n == NULL) {
+ i = kzalloc(sizeof(struct irq_info), GFP_KERNEL);
+ if (i == NULL) {
+ mutex_unlock(&hash_mutex);
+ return -ENOMEM;
+ }
+ spin_lock_init(&i->lock);
+ i->irq = up->port.irq;
+ hlist_add_head(&i->node, h);
+ }
+ mutex_unlock(&hash_mutex);
+
+ spin_lock_irq(&i->lock);
+
+ if (i->head) {
+ list_add(&up->list, i->head);
+ spin_unlock_irq(&i->lock);
+
+ ret = 0;
+ } else {
+ INIT_LIST_HEAD(&up->list);
+ i->head = &up->list;
+ spin_unlock_irq(&i->lock);
+ irq_flags |= up->port.irqflags;
+ ret = request_irq(up->port.irq, serial8250_interrupt,
+ irq_flags, "serial", i);
+ if (ret < 0)
+ serial_do_unlink(i, up);
+ }
+
+ return ret;
+}
+
+static void serial_unlink_irq_chain(struct uart_8250_port *up)
+{
+ struct irq_info *i;
+ struct hlist_node *n;
+ struct hlist_head *h;
+
+ mutex_lock(&hash_mutex);
+
+ h = &irq_lists[up->port.irq % NR_IRQ_HASH];
+
+ hlist_for_each(n, h) {
+ i = hlist_entry(n, struct irq_info, node);
+ if (i->irq == up->port.irq)
+ break;
+ }
+
+ BUG_ON(n == NULL);
+ BUG_ON(i->head == NULL);
+
+ if (list_empty(i->head))
+ free_irq(up->port.irq, i);
+
+ serial_do_unlink(i, up);
+ mutex_unlock(&hash_mutex);
+}
+
+/*
+ * This function is used to handle ports that do not have an
+ * interrupt. This doesn't work very well for 16450's, but gives
+ * barely passable results for a 16550A. (Although at the expense
+ * of much CPU overhead).
+ */
+static void serial8250_timeout(unsigned long data)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)data;
+
+ up->port.handle_irq(&up->port);
+ mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port));
+}
+
+static void serial8250_backup_timeout(unsigned long data)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)data;
+ unsigned int iir, ier = 0, lsr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Must disable interrupts or else we risk racing with the interrupt
+ * based handler.
+ */
+ if (is_real_interrupt(up->port.irq)) {
+ ier = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, 0);
+ }
+
+ iir = serial_in(up, UART_IIR);
+
+ /*
+ * This should be a safe test for anyone who doesn't trust the
+ * IIR bits on their UART, but it's specifically designed for
+ * the "Diva" UART used on the management processor on many HP
+ * ia64 and parisc boxes.
+ */
+ lsr = serial_in(up, UART_LSR);
+ up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+ if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
+ (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
+ (lsr & UART_LSR_THRE)) {
+ iir &= ~(UART_IIR_ID | UART_IIR_NO_INT);
+ iir |= UART_IIR_THRI;
+ }
+
+ if (!(iir & UART_IIR_NO_INT))
+ serial8250_tx_chars(up);
+
+ if (is_real_interrupt(up->port.irq))
+ serial_out(up, UART_IER, ier);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /* Standard timer interval plus 0.2s to keep the port running */
+ mod_timer(&up->timer,
+ jiffies + uart_poll_timeout(&up->port) + HZ / 5);
+}
+
+static unsigned int serial8250_tx_empty(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned long flags;
+ unsigned int lsr;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ lsr = serial_in(up, UART_LSR);
+ up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int serial8250_get_mctrl(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned int status;
+ unsigned int ret;
+
+ status = serial8250_modem_status(up);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned char mcr = 0;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
+
+ serial_out(up, UART_MCR, mcr);
+}
+
+static void serial8250_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (break_state == -1)
+ up->lcr |= UART_LCR_SBC;
+ else
+ up->lcr &= ~UART_LCR_SBC;
+ serial_out(up, UART_LCR, up->lcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/*
+ * Wait for transmitter & holding register to empty
+ */
+static void wait_for_xmitr(struct uart_8250_port *up, int bits)
+{
+ unsigned int status, tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ for (;;) {
+ status = serial_in(up, UART_LSR);
+
+ up->lsr_saved_flags |= status & LSR_SAVE_FLAGS;
+
+ if ((status & bits) == bits)
+ break;
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ }
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ unsigned int tmout;
+ for (tmout = 1000000; tmout; tmout--) {
+ unsigned int msr = serial_in(up, UART_MSR);
+ up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
+ if (msr & UART_MSR_CTS)
+ break;
+ udelay(1);
+ touch_nmi_watchdog();
+ }
+ }
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static int serial8250_get_poll_char(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned char lsr = serial_inp(up, UART_LSR);
+
+ if (!(lsr & UART_LSR_DR))
+ return NO_POLL_CHAR;
+
+ return serial_inp(up, UART_RX);
+}
+
+
+static void serial8250_put_poll_char(struct uart_port *port,
+ unsigned char c)
+{
+ unsigned int ier;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ /*
+ * First save the IER then disable the interrupts
+ */
+ ier = serial_in(up, UART_IER);
+ if (up->capabilities & UART_CAP_UUE)
+ serial_out(up, UART_IER, UART_IER_UUE);
+ else
+ serial_out(up, UART_IER, 0);
+
+ wait_for_xmitr(up, BOTH_EMPTY);
+ /*
+ * Send the character out.
+ * If a LF, also do CR...
+ */
+ serial_out(up, UART_TX, c);
+ if (c == 10) {
+ wait_for_xmitr(up, BOTH_EMPTY);
+ serial_out(up, UART_TX, 13);
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up, BOTH_EMPTY);
+ serial_out(up, UART_IER, ier);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
+static int serial8250_startup(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned long flags;
+ unsigned char lsr, iir;
+ int retval;
+
+ up->port.fifosize = uart_config[up->port.type].fifo_size;
+ up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
+ up->capabilities = uart_config[up->port.type].flags;
+ up->mcr = 0;
+
+ if (up->port.iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
+ if (up->port.type == PORT_16C950) {
+ /* Wake up and initialize UART */
+ up->acr = 0;
+ serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_outp(up, UART_EFR, UART_EFR_ECB);
+ serial_outp(up, UART_IER, 0);
+ serial_outp(up, UART_LCR, 0);
+ serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
+ serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_outp(up, UART_EFR, UART_EFR_ECB);
+ serial_outp(up, UART_LCR, 0);
+ }
+
+#ifdef CONFIG_SERIAL_8250_RSA
+ /*
+ * If this is an RSA port, see if we can kick it up to the
+ * higher speed clock.
+ */
+ enable_rsa(up);
+#endif
+
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reenabled in set_termios())
+ */
+ serial8250_clear_fifos(up);
+
+ /*
+ * Clear the interrupt registers.
+ */
+ (void) serial_inp(up, UART_LSR);
+ (void) serial_inp(up, UART_RX);
+ (void) serial_inp(up, UART_IIR);
+ (void) serial_inp(up, UART_MSR);
+
+ /*
+ * At this point, there's no way the LSR could still be 0xff;
+ * if it is, then bail out, because there's likely no UART
+ * here.
+ */
+ if (!(up->port.flags & UPF_BUGGY_UART) &&
+ (serial_inp(up, UART_LSR) == 0xff)) {
+ printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
+ serial_index(&up->port));
+ return -ENODEV;
+ }
+
+ /*
+ * For a XR16C850, we need to set the trigger levels
+ */
+ if (up->port.type == PORT_16850) {
+ unsigned char fctr;
+
+ serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
+
+ fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX);
+ serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX);
+ serial_outp(up, UART_TRG, UART_TRG_96);
+ serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX);
+ serial_outp(up, UART_TRG, UART_TRG_96);
+
+ serial_outp(up, UART_LCR, 0);
+ }
+
+ if (is_real_interrupt(up->port.irq)) {
+ unsigned char iir1;
+ /*
+ * Test for UARTs that do not reassert THRE when the
+ * transmitter is idle and the interrupt has already
+ * been cleared. Real 16550s should always reassert
+ * this interrupt whenever the transmitter is idle and
+ * the interrupt is enabled. Delays are necessary to
+ * allow register changes to become visible.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (up->port.irqflags & IRQF_SHARED)
+ disable_irq_nosync(up->port.irq);
+
+ wait_for_xmitr(up, UART_LSR_THRE);
+ serial_out_sync(up, UART_IER, UART_IER_THRI);
+ udelay(1); /* allow THRE to set */
+ iir1 = serial_in(up, UART_IIR);
+ serial_out(up, UART_IER, 0);
+ serial_out_sync(up, UART_IER, UART_IER_THRI);
+ udelay(1); /* allow a working UART time to re-assert THRE */
+ iir = serial_in(up, UART_IIR);
+ serial_out(up, UART_IER, 0);
+
+ if (up->port.irqflags & IRQF_SHARED)
+ enable_irq(up->port.irq);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * If the interrupt is not reasserted, setup a timer to
+ * kick the UART on a regular basis.
+ */
+ if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
+ up->bugs |= UART_BUG_THRE;
+ pr_debug("ttyS%d - using backup timer\n",
+ serial_index(port));
+ }
+ }
+
+ /*
+ * The above check will only give an accurate result the first time
+ * the port is opened so this value needs to be preserved.
+ */
+ if (up->bugs & UART_BUG_THRE) {
+ up->timer.function = serial8250_backup_timeout;
+ up->timer.data = (unsigned long)up;
+ mod_timer(&up->timer, jiffies +
+ uart_poll_timeout(port) + HZ / 5);
+ }
+
+ /*
+ * If the "interrupt" for this port doesn't correspond with any
+ * hardware interrupt, we use a timer-based system. The original
+ * driver used to do this with IRQ0.
+ */
+ if (!is_real_interrupt(up->port.irq)) {
+ up->timer.data = (unsigned long)up;
+ mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
+ } else {
+ retval = serial_link_irq_chain(up);
+ if (retval)
+ return retval;
+ }
+
+ /*
+ * Now, initialize the UART
+ */
+ serial_outp(up, UART_LCR, UART_LCR_WLEN8);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (up->port.flags & UPF_FOURPORT) {
+ if (!is_real_interrupt(up->port.irq))
+ up->port.mctrl |= TIOCM_OUT1;
+ } else
+ /*
+ * Most PC uarts need OUT2 raised to enable interrupts.
+ */
+ if (is_real_interrupt(up->port.irq))
+ up->port.mctrl |= TIOCM_OUT2;
+
+ serial8250_set_mctrl(&up->port, up->port.mctrl);
+
+ /* Serial over Lan (SoL) hack:
+ Intel 8257x Gigabit ethernet chips have a
+ 16550 emulation, to be used for Serial Over Lan.
+ Those chips take a longer time than a normal
+ serial device to signalize that a transmission
+ data was queued. Due to that, the above test generally
+ fails. One solution would be to delay the reading of
+ iir. However, this is not reliable, since the timeout
+ is variable. So, let's just don't test if we receive
+ TX irq. This way, we'll never enable UART_BUG_TXEN.
+ */
+ if (skip_txen_test || up->port.flags & UPF_NO_TXEN_TEST)
+ goto dont_test_tx_en;
+
+ /*
+ * Do a quick test to see if we receive an
+ * interrupt when we enable the TX irq.
+ */
+ serial_outp(up, UART_IER, UART_IER_THRI);
+ lsr = serial_in(up, UART_LSR);
+ iir = serial_in(up, UART_IIR);
+ serial_outp(up, UART_IER, 0);
+
+ if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
+ if (!(up->bugs & UART_BUG_TXEN)) {
+ up->bugs |= UART_BUG_TXEN;
+ pr_debug("ttyS%d - enabling bad tx status workarounds\n",
+ serial_index(port));
+ }
+ } else {
+ up->bugs &= ~UART_BUG_TXEN;
+ }
+
+dont_test_tx_en:
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Clear the interrupt registers again for luck, and clear the
+ * saved flags to avoid getting false values from polling
+ * routines or the previous session.
+ */
+ serial_inp(up, UART_LSR);
+ serial_inp(up, UART_RX);
+ serial_inp(up, UART_IIR);
+ serial_inp(up, UART_MSR);
+ up->lsr_saved_flags = 0;
+ up->msr_saved_flags = 0;
+
+ /*
+ * Finally, enable interrupts. Note: Modem status interrupts
+ * are set via set_termios(), which will be occurring imminently
+ * anyway, so we don't enable them here.
+ */
+ up->ier = UART_IER_RLSI | UART_IER_RDI;
+ serial_outp(up, UART_IER, up->ier);
+
+ if (up->port.flags & UPF_FOURPORT) {
+ unsigned int icp;
+ /*
+ * Enable interrupts on the AST Fourport board
+ */
+ icp = (up->port.iobase & 0xfe0) | 0x01f;
+ outb_p(0x80, icp);
+ (void) inb_p(icp);
+ }
+
+ return 0;
+}
+
+static void serial8250_shutdown(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned long flags;
+
+ /*
+ * Disable interrupts from this port
+ */
+ up->ier = 0;
+ serial_outp(up, UART_IER, 0);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (up->port.flags & UPF_FOURPORT) {
+ /* reset interrupts on the AST Fourport board */
+ inb((up->port.iobase & 0xfe0) | 0x1f);
+ up->port.mctrl |= TIOCM_OUT1;
+ } else
+ up->port.mctrl &= ~TIOCM_OUT2;
+
+ serial8250_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Disable break condition and FIFOs
+ */
+ serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
+ serial8250_clear_fifos(up);
+
+#ifdef CONFIG_SERIAL_8250_RSA
+ /*
+ * Reset the RSA board back to 115kbps compat mode.
+ */
+ disable_rsa(up);
+#endif
+
+ /*
+ * Read data port to reset things, and then unlink from
+ * the IRQ chain.
+ */
+ (void) serial_in(up, UART_RX);
+
+ del_timer_sync(&up->timer);
+ up->timer.function = serial8250_timeout;
+ if (is_real_interrupt(up->port.irq))
+ serial_unlink_irq_chain(up);
+}
+
+static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
+{
+ unsigned int quot;
+
+ /*
+ * Handle magic divisors for baud rates above baud_base on
+ * SMSC SuperIO chips.
+ */
+ if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+ baud == (port->uartclk/4))
+ quot = 0x8001;
+ else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+ baud == (port->uartclk/8))
+ quot = 0x8002;
+ else
+ quot = uart_get_divisor(port, baud);
+
+ return quot;
+}
+
+void
+serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned char cval, fcr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = UART_LCR_WLEN5;
+ break;
+ case CS6:
+ cval = UART_LCR_WLEN6;
+ break;
+ case CS7:
+ cval = UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ cval = UART_LCR_WLEN8;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= UART_LCR_STOP;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+#ifdef CMSPAR
+ if (termios->c_cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+#endif
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old,
+ port->uartclk / 16 / 0xffff,
+ port->uartclk / 16);
+ quot = serial8250_get_divisor(port, baud);
+
+ /*
+ * Oxford Semi 952 rev B workaround
+ */
+ if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0)
+ quot++;
+
+ if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) {
+ if (baud < 2400)
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
+ else
+ fcr = uart_config[up->port.type].fcr;
+ }
+
+ /*
+ * MCR-based auto flow control. When AFE is enabled, RTS will be
+ * deasserted when the receive FIFO contains more characters than
+ * the trigger, or the MCR RTS bit is cleared. In the case where
+ * the remote UART is not using CTS auto flow control, we must
+ * have sufficient FIFO entries for the latency of the remote
+ * UART to respond. IOW, at least 32 bytes of FIFO.
+ */
+ if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) {
+ up->mcr &= ~UART_MCR_AFE;
+ if (termios->c_cflag & CRTSCTS)
+ up->mcr |= UART_MCR_AFE;
+ }
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characteres to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ up->port.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (!(up->bugs & UART_BUG_NOMSR) &&
+ UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+ if (up->capabilities & UART_CAP_UUE)
+ up->ier |= UART_IER_UUE;
+ if (up->capabilities & UART_CAP_RTOIE)
+ up->ier |= UART_IER_RTOIE;
+
+ serial_out(up, UART_IER, up->ier);
+
+ if (up->capabilities & UART_CAP_EFR) {
+ unsigned char efr = 0;
+ /*
+ * TI16C752/Startech hardware flow control. FIXME:
+ * - TI16C752 requires control thresholds to be set.
+ * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled.
+ */
+ if (termios->c_cflag & CRTSCTS)
+ efr |= UART_EFR_CTS;
+
+ serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
+ if (up->port.flags & UPF_EXAR_EFR)
+ serial_outp(up, UART_XR_EFR, efr);
+ else
+ serial_outp(up, UART_EFR, efr);
+ }
+
+#ifdef CONFIG_ARCH_OMAP
+ /* Workaround to enable 115200 baud on OMAP1510 internal ports */
+ if (cpu_is_omap1510() && is_omap_port(up)) {
+ if (baud == 115200) {
+ quot = 1;
+ serial_out(up, UART_OMAP_OSC_12M_SEL, 1);
+ } else
+ serial_out(up, UART_OMAP_OSC_12M_SEL, 0);
+ }
+#endif
+
+ if (up->capabilities & UART_NATSEMI) {
+ /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */
+ serial_outp(up, UART_LCR, 0xe0);
+ } else {
+ serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
+ }
+
+ serial_dl_write(up, quot);
+
+ /*
+ * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
+ * is written without DLAB set, this mode will be disabled.
+ */
+ if (up->port.type == PORT_16750)
+ serial_outp(up, UART_FCR, fcr);
+
+ serial_outp(up, UART_LCR, cval); /* reset DLAB */
+ up->lcr = cval; /* Save LCR */
+ if (up->port.type != PORT_16750) {
+ if (fcr & UART_FCR_ENABLE_FIFO) {
+ /* emulated UARTs (Lucent Venus 167x) need two steps */
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ }
+ serial_outp(up, UART_FCR, fcr); /* set fcr */
+ }
+ serial8250_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ /* Don't rewrite B0 */
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
+}
+EXPORT_SYMBOL(serial8250_do_set_termios);
+
+static void
+serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ if (port->set_termios)
+ port->set_termios(port, termios, old);
+ else
+ serial8250_do_set_termios(port, termios, old);
+}
+
+static void
+serial8250_set_ldisc(struct uart_port *port, int new)
+{
+ if (new == N_PPS) {
+ port->flags |= UPF_HARDPPS_CD;
+ serial8250_enable_ms(port);
+ } else
+ port->flags &= ~UPF_HARDPPS_CD;
+}
+
+
+void serial8250_do_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct uart_8250_port *p =
+ container_of(port, struct uart_8250_port, port);
+
+ serial8250_set_sleep(p, state != 0);
+}
+EXPORT_SYMBOL(serial8250_do_pm);
+
+static void
+serial8250_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ if (port->pm)
+ port->pm(port, state, oldstate);
+ else
+ serial8250_do_pm(port, state, oldstate);
+}
+
+static unsigned int serial8250_port_size(struct uart_8250_port *pt)
+{
+ if (pt->port.iotype == UPIO_AU)
+ return 0x1000;
+#ifdef CONFIG_ARCH_OMAP
+ if (is_omap_port(pt))
+ return 0x16 << pt->port.regshift;
+#endif
+ return 8 << pt->port.regshift;
+}
+
+/*
+ * Resource handling.
+ */
+static int serial8250_request_std_resource(struct uart_8250_port *up)
+{
+ unsigned int size = serial8250_port_size(up);
+ int ret = 0;
+
+ switch (up->port.iotype) {
+ case UPIO_AU:
+ case UPIO_TSI:
+ case UPIO_MEM32:
+ case UPIO_MEM:
+ if (!up->port.mapbase)
+ break;
+
+ if (!request_mem_region(up->port.mapbase, size, "serial")) {
+ ret = -EBUSY;
+ break;
+ }
+
+ if (up->port.flags & UPF_IOREMAP) {
+ up->port.membase = ioremap_nocache(up->port.mapbase,
+ size);
+ if (!up->port.membase) {
+ release_mem_region(up->port.mapbase, size);
+ ret = -ENOMEM;
+ }
+ }
+ break;
+
+ case UPIO_HUB6:
+ case UPIO_PORT:
+ if (!request_region(up->port.iobase, size, "serial"))
+ ret = -EBUSY;
+ break;
+ }
+ return ret;
+}
+
+static void serial8250_release_std_resource(struct uart_8250_port *up)
+{
+ unsigned int size = serial8250_port_size(up);
+
+ switch (up->port.iotype) {
+ case UPIO_AU:
+ case UPIO_TSI:
+ case UPIO_MEM32:
+ case UPIO_MEM:
+ if (!up->port.mapbase)
+ break;
+
+ if (up->port.flags & UPF_IOREMAP) {
+ iounmap(up->port.membase);
+ up->port.membase = NULL;
+ }
+
+ release_mem_region(up->port.mapbase, size);
+ break;
+
+ case UPIO_HUB6:
+ case UPIO_PORT:
+ release_region(up->port.iobase, size);
+ break;
+ }
+}
+
+static int serial8250_request_rsa_resource(struct uart_8250_port *up)
+{
+ unsigned long start = UART_RSA_BASE << up->port.regshift;
+ unsigned int size = 8 << up->port.regshift;
+ int ret = -EINVAL;
+
+ switch (up->port.iotype) {
+ case UPIO_HUB6:
+ case UPIO_PORT:
+ start += up->port.iobase;
+ if (request_region(start, size, "serial-rsa"))
+ ret = 0;
+ else
+ ret = -EBUSY;
+ break;
+ }
+
+ return ret;
+}
+
+static void serial8250_release_rsa_resource(struct uart_8250_port *up)
+{
+ unsigned long offset = UART_RSA_BASE << up->port.regshift;
+ unsigned int size = 8 << up->port.regshift;
+
+ switch (up->port.iotype) {
+ case UPIO_HUB6:
+ case UPIO_PORT:
+ release_region(up->port.iobase + offset, size);
+ break;
+ }
+}
+
+static void serial8250_release_port(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ serial8250_release_std_resource(up);
+ if (up->port.type == PORT_RSA)
+ serial8250_release_rsa_resource(up);
+}
+
+static int serial8250_request_port(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ int ret = 0;
+
+ ret = serial8250_request_std_resource(up);
+ if (ret == 0 && up->port.type == PORT_RSA) {
+ ret = serial8250_request_rsa_resource(up);
+ if (ret < 0)
+ serial8250_release_std_resource(up);
+ }
+
+ return ret;
+}
+
+static void serial8250_config_port(struct uart_port *port, int flags)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ int probeflags = PROBE_ANY;
+ int ret;
+
+ /*
+ * Find the region that we can probe for. This in turn
+ * tells us whether we can probe for the type of port.
+ */
+ ret = serial8250_request_std_resource(up);
+ if (ret < 0)
+ return;
+
+ ret = serial8250_request_rsa_resource(up);
+ if (ret < 0)
+ probeflags &= ~PROBE_RSA;
+
+ if (up->port.iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
+ if (flags & UART_CONFIG_TYPE)
+ autoconfig(up, probeflags);
+
+ /* if access method is AU, it is a 16550 with a quirk */
+ if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
+ up->bugs |= UART_BUG_NOMSR;
+
+ if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
+ autoconfig_irq(up);
+
+ if (up->port.type != PORT_RSA && probeflags & PROBE_RSA)
+ serial8250_release_rsa_resource(up);
+ if (up->port.type == PORT_UNKNOWN)
+ serial8250_release_std_resource(up);
+}
+
+static int
+serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (ser->irq >= nr_irqs || ser->irq < 0 ||
+ ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
+ ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
+ ser->type == PORT_STARTECH)
+ return -EINVAL;
+ return 0;
+}
+
+static const char *
+serial8250_type(struct uart_port *port)
+{
+ int type = port->type;
+
+ if (type >= ARRAY_SIZE(uart_config))
+ type = 0;
+ return uart_config[type].name;
+}
+
+static struct uart_ops serial8250_pops = {
+ .tx_empty = serial8250_tx_empty,
+ .set_mctrl = serial8250_set_mctrl,
+ .get_mctrl = serial8250_get_mctrl,
+ .stop_tx = serial8250_stop_tx,
+ .start_tx = serial8250_start_tx,
+ .stop_rx = serial8250_stop_rx,
+ .enable_ms = serial8250_enable_ms,
+ .break_ctl = serial8250_break_ctl,
+ .startup = serial8250_startup,
+ .shutdown = serial8250_shutdown,
+ .set_termios = serial8250_set_termios,
+ .set_ldisc = serial8250_set_ldisc,
+ .pm = serial8250_pm,
+ .type = serial8250_type,
+ .release_port = serial8250_release_port,
+ .request_port = serial8250_request_port,
+ .config_port = serial8250_config_port,
+ .verify_port = serial8250_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = serial8250_get_poll_char,
+ .poll_put_char = serial8250_put_poll_char,
+#endif
+};
+
+static struct uart_8250_port serial8250_ports[UART_NR];
+
+static void (*serial8250_isa_config)(int port, struct uart_port *up,
+ unsigned short *capabilities);
+
+void serial8250_set_isa_configurator(
+ void (*v)(int port, struct uart_port *up, unsigned short *capabilities))
+{
+ serial8250_isa_config = v;
+}
+EXPORT_SYMBOL(serial8250_set_isa_configurator);
+
+static void __init serial8250_isa_init_ports(void)
+{
+ struct uart_8250_port *up;
+ static int first = 1;
+ int i, irqflag = 0;
+
+ if (!first)
+ return;
+ first = 0;
+
+ for (i = 0; i < nr_uarts; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+
+ up->port.line = i;
+ spin_lock_init(&up->port.lock);
+
+ init_timer(&up->timer);
+ up->timer.function = serial8250_timeout;
+
+ /*
+ * ALPHA_KLUDGE_MCR needs to be killed.
+ */
+ up->mcr_mask = ~ALPHA_KLUDGE_MCR;
+ up->mcr_force = ALPHA_KLUDGE_MCR;
+
+ up->port.ops = &serial8250_pops;
+ }
+
+ if (share_irqs)
+ irqflag = IRQF_SHARED;
+
+ for (i = 0, up = serial8250_ports;
+ i < ARRAY_SIZE(old_serial_port) && i < nr_uarts;
+ i++, up++) {
+ up->port.iobase = old_serial_port[i].port;
+ up->port.irq = irq_canonicalize(old_serial_port[i].irq);
+ up->port.irqflags = old_serial_port[i].irqflags;
+ up->port.uartclk = old_serial_port[i].baud_base * 16;
+ up->port.flags = old_serial_port[i].flags;
+ up->port.hub6 = old_serial_port[i].hub6;
+ up->port.membase = old_serial_port[i].iomem_base;
+ up->port.iotype = old_serial_port[i].io_type;
+ up->port.regshift = old_serial_port[i].iomem_reg_shift;
+ set_io_from_upio(&up->port);
+ up->port.irqflags |= irqflag;
+ if (serial8250_isa_config != NULL)
+ serial8250_isa_config(i, &up->port, &up->capabilities);
+
+ }
+}
+
+static void
+serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type)
+{
+ up->port.type = type;
+ up->port.fifosize = uart_config[type].fifo_size;
+ up->capabilities = uart_config[type].flags;
+ up->tx_loadsz = uart_config[type].tx_loadsz;
+}
+
+static void __init
+serial8250_register_ports(struct uart_driver *drv, struct device *dev)
+{
+ int i;
+
+ for (i = 0; i < nr_uarts; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+ up->cur_iotype = 0xFF;
+ }
+
+ serial8250_isa_init_ports();
+
+ for (i = 0; i < nr_uarts; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+
+ up->port.dev = dev;
+
+ if (up->port.flags & UPF_FIXED_TYPE)
+ serial8250_init_fixed_type_port(up, up->port.type);
+
+ uart_add_one_port(drv, &up->port);
+ }
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+
+static void serial8250_console_putchar(struct uart_port *port, int ch)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ wait_for_xmitr(up, UART_LSR_THRE);
+ serial_out(up, UART_TX, ch);
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void
+serial8250_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_8250_port *up = &serial8250_ports[co->index];
+ unsigned long flags;
+ unsigned int ier;
+ int locked = 1;
+
+ touch_nmi_watchdog();
+
+ local_irq_save(flags);
+ if (up->port.sysrq) {
+ /* serial8250_handle_irq() already took the lock */
+ locked = 0;
+ } else if (oops_in_progress) {
+ locked = spin_trylock(&up->port.lock);
+ } else
+ spin_lock(&up->port.lock);
+
+ /*
+ * First save the IER then disable the interrupts
+ */
+ ier = serial_in(up, UART_IER);
+
+ if (up->capabilities & UART_CAP_UUE)
+ serial_out(up, UART_IER, UART_IER_UUE);
+ else
+ serial_out(up, UART_IER, 0);
+
+ uart_console_write(&up->port, s, count, serial8250_console_putchar);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up, BOTH_EMPTY);
+ serial_out(up, UART_IER, ier);
+
+ /*
+ * The receive handling will happen properly because the
+ * receive ready bit will still be set; it is not cleared
+ * on read. However, modem control will not, we must
+ * call it if we have saved something in the saved flags
+ * while processing with interrupts off.
+ */
+ if (up->msr_saved_flags)
+ serial8250_modem_status(up);
+
+ if (locked)
+ spin_unlock(&up->port.lock);
+ local_irq_restore(flags);
+}
+
+static int __init serial8250_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index >= nr_uarts)
+ co->index = 0;
+ port = &serial8250_ports[co->index].port;
+ if (!port->iobase && !port->membase)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static int serial8250_console_early_setup(void)
+{
+ return serial8250_find_port_for_earlycon();
+}
+
+static struct console serial8250_console = {
+ .name = "ttyS",
+ .write = serial8250_console_write,
+ .device = uart_console_device,
+ .setup = serial8250_console_setup,
+ .early_setup = serial8250_console_early_setup,
+ .flags = CON_PRINTBUFFER | CON_ANYTIME,
+ .index = -1,
+ .data = &serial8250_reg,
+};
+
+static int __init serial8250_console_init(void)
+{
+ if (nr_uarts > UART_NR)
+ nr_uarts = UART_NR;
+
+ serial8250_isa_init_ports();
+ register_console(&serial8250_console);
+ return 0;
+}
+console_initcall(serial8250_console_init);
+
+int serial8250_find_port(struct uart_port *p)
+{
+ int line;
+ struct uart_port *port;
+
+ for (line = 0; line < nr_uarts; line++) {
+ port = &serial8250_ports[line].port;
+ if (uart_match_port(p, port))
+ return line;
+ }
+ return -ENODEV;
+}
+
+#define SERIAL8250_CONSOLE &serial8250_console
+#else
+#define SERIAL8250_CONSOLE NULL
+#endif
+
+static struct uart_driver serial8250_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .cons = SERIAL8250_CONSOLE,
+};
+
+/*
+ * early_serial_setup - early registration for 8250 ports
+ *
+ * Setup an 8250 port structure prior to console initialisation. Use
+ * after console initialisation will cause undefined behaviour.
+ */
+int __init early_serial_setup(struct uart_port *port)
+{
+ struct uart_port *p;
+
+ if (port->line >= ARRAY_SIZE(serial8250_ports))
+ return -ENODEV;
+
+ serial8250_isa_init_ports();
+ p = &serial8250_ports[port->line].port;
+ p->iobase = port->iobase;
+ p->membase = port->membase;
+ p->irq = port->irq;
+ p->irqflags = port->irqflags;
+ p->uartclk = port->uartclk;
+ p->fifosize = port->fifosize;
+ p->regshift = port->regshift;
+ p->iotype = port->iotype;
+ p->flags = port->flags;
+ p->mapbase = port->mapbase;
+ p->private_data = port->private_data;
+ p->type = port->type;
+ p->line = port->line;
+
+ set_io_from_upio(p);
+ if (port->serial_in)
+ p->serial_in = port->serial_in;
+ if (port->serial_out)
+ p->serial_out = port->serial_out;
+ if (port->handle_irq)
+ p->handle_irq = port->handle_irq;
+ else
+ p->handle_irq = serial8250_default_handle_irq;
+
+ return 0;
+}
+
+/**
+ * serial8250_suspend_port - suspend one serial port
+ * @line: serial line number
+ *
+ * Suspend one serial port.
+ */
+void serial8250_suspend_port(int line)
+{
+ uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port);
+}
+
+/**
+ * serial8250_resume_port - resume one serial port
+ * @line: serial line number
+ *
+ * Resume one serial port.
+ */
+void serial8250_resume_port(int line)
+{
+ struct uart_8250_port *up = &serial8250_ports[line];
+
+ if (up->capabilities & UART_NATSEMI) {
+ /* Ensure it's still in high speed mode */
+ serial_outp(up, UART_LCR, 0xE0);
+
+ ns16550a_goto_highspeed(up);
+
+ serial_outp(up, UART_LCR, 0);
+ up->port.uartclk = 921600*16;
+ }
+ uart_resume_port(&serial8250_reg, &up->port);
+}
+
+/*
+ * Register a set of serial devices attached to a platform device. The
+ * list is terminated with a zero flags entry, which means we expect
+ * all entries to have at least UPF_BOOT_AUTOCONF set.
+ */
+static int __devinit serial8250_probe(struct platform_device *dev)
+{
+ struct plat_serial8250_port *p = dev->dev.platform_data;
+ struct uart_port port;
+ int ret, i, irqflag = 0;
+
+ memset(&port, 0, sizeof(struct uart_port));
+
+ if (share_irqs)
+ irqflag = IRQF_SHARED;
+
+ for (i = 0; p && p->flags != 0; p++, i++) {
+ port.iobase = p->iobase;
+ port.membase = p->membase;
+ port.irq = p->irq;
+ port.irqflags = p->irqflags;
+ port.uartclk = p->uartclk;
+ port.regshift = p->regshift;
+ port.iotype = p->iotype;
+ port.flags = p->flags;
+ port.mapbase = p->mapbase;
+ port.hub6 = p->hub6;
+ port.private_data = p->private_data;
+ port.type = p->type;
+ port.serial_in = p->serial_in;
+ port.serial_out = p->serial_out;
+ port.handle_irq = p->handle_irq;
+ port.set_termios = p->set_termios;
+ port.pm = p->pm;
+ port.dev = &dev->dev;
+ port.irqflags |= irqflag;
+ ret = serial8250_register_port(&port);
+ if (ret < 0) {
+ dev_err(&dev->dev, "unable to register port at index %d "
+ "(IO%lx MEM%llx IRQ%d): %d\n", i,
+ p->iobase, (unsigned long long)p->mapbase,
+ p->irq, ret);
+ }
+ }
+ return 0;
+}
+
+/*
+ * Remove serial ports registered against a platform device.
+ */
+static int __devexit serial8250_remove(struct platform_device *dev)
+{
+ int i;
+
+ for (i = 0; i < nr_uarts; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+
+ if (up->port.dev == &dev->dev)
+ serial8250_unregister_port(i);
+ }
+ return 0;
+}
+
+static int serial8250_suspend(struct platform_device *dev, pm_message_t state)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+
+ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
+ uart_suspend_port(&serial8250_reg, &up->port);
+ }
+
+ return 0;
+}
+
+static int serial8250_resume(struct platform_device *dev)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+
+ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
+ serial8250_resume_port(i);
+ }
+
+ return 0;
+}
+
+static struct platform_driver serial8250_isa_driver = {
+ .probe = serial8250_probe,
+ .remove = __devexit_p(serial8250_remove),
+ .suspend = serial8250_suspend,
+ .resume = serial8250_resume,
+ .driver = {
+ .name = "serial8250",
+ .owner = THIS_MODULE,
+ },
+};
+
+/*
+ * This "device" covers _all_ ISA 8250-compatible serial devices listed
+ * in the table in include/asm/serial.h
+ */
+static struct platform_device *serial8250_isa_devs;
+
+/*
+ * serial8250_register_port and serial8250_unregister_port allows for
+ * 16x50 serial ports to be configured at run-time, to support PCMCIA
+ * modems and PCI multiport cards.
+ */
+static DEFINE_MUTEX(serial_mutex);
+
+static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port)
+{
+ int i;
+
+ /*
+ * First, find a port entry which matches.
+ */
+ for (i = 0; i < nr_uarts; i++)
+ if (uart_match_port(&serial8250_ports[i].port, port))
+ return &serial8250_ports[i];
+
+ /*
+ * We didn't find a matching entry, so look for the first
+ * free entry. We look for one which hasn't been previously
+ * used (indicated by zero iobase).
+ */
+ for (i = 0; i < nr_uarts; i++)
+ if (serial8250_ports[i].port.type == PORT_UNKNOWN &&
+ serial8250_ports[i].port.iobase == 0)
+ return &serial8250_ports[i];
+
+ /*
+ * That also failed. Last resort is to find any entry which
+ * doesn't have a real port associated with it.
+ */
+ for (i = 0; i < nr_uarts; i++)
+ if (serial8250_ports[i].port.type == PORT_UNKNOWN)
+ return &serial8250_ports[i];
+
+ return NULL;
+}
+
+/**
+ * serial8250_register_port - register a serial port
+ * @port: serial port template
+ *
+ * Configure the serial port specified by the request. If the
+ * port exists and is in use, it is hung up and unregistered
+ * first.
+ *
+ * The port is then probed and if necessary the IRQ is autodetected
+ * If this fails an error is returned.
+ *
+ * On success the port is ready to use and the line number is returned.
+ */
+int serial8250_register_port(struct uart_port *port)
+{
+ struct uart_8250_port *uart;
+ int ret = -ENOSPC;
+
+ if (port->uartclk == 0)
+ return -EINVAL;
+
+ mutex_lock(&serial_mutex);
+
+ uart = serial8250_find_match_or_unused(port);
+ if (uart) {
+ uart_remove_one_port(&serial8250_reg, &uart->port);
+
+ uart->port.iobase = port->iobase;
+ uart->port.membase = port->membase;
+ uart->port.irq = port->irq;
+ uart->port.irqflags = port->irqflags;
+ uart->port.uartclk = port->uartclk;
+ uart->port.fifosize = port->fifosize;
+ uart->port.regshift = port->regshift;
+ uart->port.iotype = port->iotype;
+ uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
+ uart->port.mapbase = port->mapbase;
+ uart->port.private_data = port->private_data;
+ if (port->dev)
+ uart->port.dev = port->dev;
+
+ if (port->flags & UPF_FIXED_TYPE)
+ serial8250_init_fixed_type_port(uart, port->type);
+
+ set_io_from_upio(&uart->port);
+ /* Possibly override default I/O functions. */
+ if (port->serial_in)
+ uart->port.serial_in = port->serial_in;
+ if (port->serial_out)
+ uart->port.serial_out = port->serial_out;
+ if (port->handle_irq)
+ uart->port.handle_irq = port->handle_irq;
+ /* Possibly override set_termios call */
+ if (port->set_termios)
+ uart->port.set_termios = port->set_termios;
+ if (port->pm)
+ uart->port.pm = port->pm;
+
+ if (serial8250_isa_config != NULL)
+ serial8250_isa_config(0, &uart->port,
+ &uart->capabilities);
+
+ ret = uart_add_one_port(&serial8250_reg, &uart->port);
+ if (ret == 0)
+ ret = uart->port.line;
+ }
+ mutex_unlock(&serial_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(serial8250_register_port);
+
+/**
+ * serial8250_unregister_port - remove a 16x50 serial port at runtime
+ * @line: serial line number
+ *
+ * Remove one serial port. This may not be called from interrupt
+ * context. We hand the port back to the our control.
+ */
+void serial8250_unregister_port(int line)
+{
+ struct uart_8250_port *uart = &serial8250_ports[line];
+
+ mutex_lock(&serial_mutex);
+ uart_remove_one_port(&serial8250_reg, &uart->port);
+ if (serial8250_isa_devs) {
+ uart->port.flags &= ~UPF_BOOT_AUTOCONF;
+ uart->port.type = PORT_UNKNOWN;
+ uart->port.dev = &serial8250_isa_devs->dev;
+ uart->capabilities = uart_config[uart->port.type].flags;
+ uart_add_one_port(&serial8250_reg, &uart->port);
+ } else {
+ uart->port.dev = NULL;
+ }
+ mutex_unlock(&serial_mutex);
+}
+EXPORT_SYMBOL(serial8250_unregister_port);
+
+static int __init serial8250_init(void)
+{
+ int ret;
+
+ if (nr_uarts > UART_NR)
+ nr_uarts = UART_NR;
+
+ printk(KERN_INFO "Serial: 8250/16550 driver, "
+ "%d ports, IRQ sharing %sabled\n", nr_uarts,
+ share_irqs ? "en" : "dis");
+
+#ifdef CONFIG_SPARC
+ ret = sunserial_register_minors(&serial8250_reg, UART_NR);
+#else
+ serial8250_reg.nr = UART_NR;
+ ret = uart_register_driver(&serial8250_reg);
+#endif
+ if (ret)
+ goto out;
+
+ serial8250_isa_devs = platform_device_alloc("serial8250",
+ PLAT8250_DEV_LEGACY);
+ if (!serial8250_isa_devs) {
+ ret = -ENOMEM;
+ goto unreg_uart_drv;
+ }
+
+ ret = platform_device_add(serial8250_isa_devs);
+ if (ret)
+ goto put_dev;
+
+ serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev);
+
+ ret = platform_driver_register(&serial8250_isa_driver);
+ if (ret == 0)
+ goto out;
+
+ platform_device_del(serial8250_isa_devs);
+put_dev:
+ platform_device_put(serial8250_isa_devs);
+unreg_uart_drv:
+#ifdef CONFIG_SPARC
+ sunserial_unregister_minors(&serial8250_reg, UART_NR);
+#else
+ uart_unregister_driver(&serial8250_reg);
+#endif
+out:
+ return ret;
+}
+
+static void __exit serial8250_exit(void)
+{
+ struct platform_device *isa_dev = serial8250_isa_devs;
+
+ /*
+ * This tells serial8250_unregister_port() not to re-register
+ * the ports (thereby making serial8250_isa_driver permanently
+ * in use.)
+ */
+ serial8250_isa_devs = NULL;
+
+ platform_driver_unregister(&serial8250_isa_driver);
+ platform_device_unregister(isa_dev);
+
+#ifdef CONFIG_SPARC
+ sunserial_unregister_minors(&serial8250_reg, UART_NR);
+#else
+ uart_unregister_driver(&serial8250_reg);
+#endif
+}
+
+module_init(serial8250_init);
+module_exit(serial8250_exit);
+
+EXPORT_SYMBOL(serial8250_suspend_port);
+EXPORT_SYMBOL(serial8250_resume_port);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic 8250/16x50 serial driver");
+
+module_param(share_irqs, uint, 0644);
+MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
+ " (unsafe)");
+
+module_param(nr_uarts, uint, 0644);
+MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
+
+module_param(skip_txen_test, uint, 0644);
+MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time");
+
+#ifdef CONFIG_SERIAL_8250_RSA
+module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
+MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
+#endif
+MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
--- /dev/null
+/*
+ * Driver for 8250/16550-type serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright (C) 2001 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/serial_8250.h>
+
+struct uart_8250_port {
+ struct uart_port port;
+ struct timer_list timer; /* "no irq" timer */
+ struct list_head list; /* ports on this IRQ */
+ unsigned short capabilities; /* port capabilities */
+ unsigned short bugs; /* port bugs */
+ unsigned int tx_loadsz; /* transmit fifo load size */
+ unsigned char acr;
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr;
+ unsigned char mcr_mask; /* mask of user bits */
+ unsigned char mcr_force; /* mask of forced bits */
+ unsigned char cur_iotype; /* Running I/O type */
+
+ /*
+ * Some bits in registers are cleared on a read, so they must
+ * be saved whenever the register is read but the bits will not
+ * be immediately processed.
+ */
+#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
+ unsigned char lsr_saved_flags;
+#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
+ unsigned char msr_saved_flags;
+};
+
+struct old_serial_port {
+ unsigned int uart;
+ unsigned int baud_base;
+ unsigned int port;
+ unsigned int irq;
+ unsigned int flags;
+ unsigned char hub6;
+ unsigned char io_type;
+ unsigned char *iomem_base;
+ unsigned short iomem_reg_shift;
+ unsigned long irqflags;
+};
+
+/*
+ * This replaces serial_uart_config in include/linux/serial.h
+ */
+struct serial8250_config {
+ const char *name;
+ unsigned short fifo_size;
+ unsigned short tx_loadsz;
+ unsigned char fcr;
+ unsigned int flags;
+};
+
+#define UART_CAP_FIFO (1 << 8) /* UART has FIFO */
+#define UART_CAP_EFR (1 << 9) /* UART has EFR */
+#define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */
+#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */
+#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */
+#define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */
+
+#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
+#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
+#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */
+#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */
+
+#define PROBE_RSA (1 << 0)
+#define PROBE_ANY (~0)
+
+#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
+
+#ifdef CONFIG_SERIAL_8250_SHARE_IRQ
+#define SERIAL8250_SHARE_IRQS 1
+#else
+#define SERIAL8250_SHARE_IRQS 0
+#endif
+
+#if defined(__alpha__) && !defined(CONFIG_PCI)
+/*
+ * Digital did something really horribly wrong with the OUT1 and OUT2
+ * lines on at least some ALPHA's. The failure mode is that if either
+ * is cleared, the machine locks up with endless interrupts.
+ */
+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1)
+#elif defined(CONFIG_SBC8560)
+/*
+ * WindRiver did something similarly broken on their SBC8560 board. The
+ * UART tristates its IRQ output while OUT2 is clear, but they pulled
+ * the interrupt line _up_ instead of down, so if we register the IRQ
+ * while the UART is in that state, we die in an IRQ storm. */
+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
+#else
+#define ALPHA_KLUDGE_MCR 0
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2005 Russell King.
+ * Data taken from include/asm-i386/serial.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#define PORT(_base,_irq) \
+ { \
+ .iobase = _base, \
+ .irq = _irq, \
+ .uartclk = 1843200, \
+ .iotype = UPIO_PORT, \
+ .flags = UPF_BOOT_AUTOCONF, \
+ }
+
+static struct plat_serial8250_port accent_data[] = {
+ PORT(0x330, 4),
+ PORT(0x338, 4),
+ { },
+};
+
+static struct platform_device accent_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_ACCENT,
+ .dev = {
+ .platform_data = accent_data,
+ },
+};
+
+static int __init accent_init(void)
+{
+ return platform_device_register(&accent_device);
+}
+
+module_init(accent_init);
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("8250 serial probe module for Accent Async cards");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * linux/drivers/serial/acorn.c
+ *
+ * Copyright (C) 1996-2003 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/ecard.h>
+#include <asm/string.h>
+
+#include "8250.h"
+
+#define MAX_PORTS 3
+
+struct serial_card_type {
+ unsigned int num_ports;
+ unsigned int uartclk;
+ unsigned int type;
+ unsigned int offset[MAX_PORTS];
+};
+
+struct serial_card_info {
+ unsigned int num_ports;
+ int ports[MAX_PORTS];
+ void __iomem *vaddr;
+};
+
+static int __devinit
+serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
+{
+ struct serial_card_info *info;
+ struct serial_card_type *type = id->data;
+ struct uart_port port;
+ unsigned long bus_addr;
+ unsigned int i;
+
+ info = kzalloc(sizeof(struct serial_card_info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->num_ports = type->num_ports;
+
+ bus_addr = ecard_resource_start(ec, type->type);
+ info->vaddr = ecardm_iomap(ec, type->type, 0, 0);
+ if (!info->vaddr) {
+ kfree(info);
+ return -ENOMEM;
+ }
+
+ ecard_set_drvdata(ec, info);
+
+ memset(&port, 0, sizeof(struct uart_port));
+ port.irq = ec->irq;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ port.uartclk = type->uartclk;
+ port.iotype = UPIO_MEM;
+ port.regshift = 2;
+ port.dev = &ec->dev;
+
+ for (i = 0; i < info->num_ports; i ++) {
+ port.membase = info->vaddr + type->offset[i];
+ port.mapbase = bus_addr + type->offset[i];
+
+ info->ports[i] = serial8250_register_port(&port);
+ }
+
+ return 0;
+}
+
+static void __devexit serial_card_remove(struct expansion_card *ec)
+{
+ struct serial_card_info *info = ecard_get_drvdata(ec);
+ int i;
+
+ ecard_set_drvdata(ec, NULL);
+
+ for (i = 0; i < info->num_ports; i++)
+ if (info->ports[i] > 0)
+ serial8250_unregister_port(info->ports[i]);
+
+ kfree(info);
+}
+
+static struct serial_card_type atomwide_type = {
+ .num_ports = 3,
+ .uartclk = 7372800,
+ .type = ECARD_RES_IOCSLOW,
+ .offset = { 0x2800, 0x2400, 0x2000 },
+};
+
+static struct serial_card_type serport_type = {
+ .num_ports = 2,
+ .uartclk = 3686400,
+ .type = ECARD_RES_IOCSLOW,
+ .offset = { 0x2000, 0x2020 },
+};
+
+static const struct ecard_id serial_cids[] = {
+ { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, &atomwide_type },
+ { MANU_SERPORT, PROD_SERPORT_DSPORT, &serport_type },
+ { 0xffff, 0xffff }
+};
+
+static struct ecard_driver serial_card_driver = {
+ .probe = serial_card_probe,
+ .remove = __devexit_p(serial_card_remove),
+ .id_table = serial_cids,
+ .drv = {
+ .name = "8250_acorn",
+ },
+};
+
+static int __init serial_card_init(void)
+{
+ return ecard_register_driver(&serial_card_driver);
+}
+
+static void __exit serial_card_exit(void)
+{
+ ecard_remove_driver(&serial_card_driver);
+}
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("Acorn 8250-compatible serial port expansion card driver");
+MODULE_LICENSE("GPL");
+
+module_init(serial_card_init);
+module_exit(serial_card_exit);
--- /dev/null
+/*
+ * Copyright (C) 2005 Russell King.
+ * Data taken from include/asm-i386/serial.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#define PORT(_base,_irq) \
+ { \
+ .iobase = _base, \
+ .irq = _irq, \
+ .uartclk = 1843200, \
+ .iotype = UPIO_PORT, \
+ .flags = UPF_BOOT_AUTOCONF, \
+ }
+
+static struct plat_serial8250_port boca_data[] = {
+ PORT(0x100, 12),
+ PORT(0x108, 12),
+ PORT(0x110, 12),
+ PORT(0x118, 12),
+ PORT(0x120, 12),
+ PORT(0x128, 12),
+ PORT(0x130, 12),
+ PORT(0x138, 12),
+ PORT(0x140, 12),
+ PORT(0x148, 12),
+ PORT(0x150, 12),
+ PORT(0x158, 12),
+ PORT(0x160, 12),
+ PORT(0x168, 12),
+ PORT(0x170, 12),
+ PORT(0x178, 12),
+ { },
+};
+
+static struct platform_device boca_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_BOCA,
+ .dev = {
+ .platform_data = boca_data,
+ },
+};
+
+static int __init boca_init(void)
+{
+ return platform_device_register(&boca_device);
+}
+
+module_init(boca_init);
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("8250 serial probe module for Boca cards");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Synopsys DesignWare 8250 driver.
+ *
+ * Copyright 2011 Picochip, Jamie Iles.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The Synopsys DesignWare 8250 has an extra feature whereby it detects if the
+ * LCR is written whilst busy. If it is, then a busy detect interrupt is
+ * raised, the LCR needs to be rewritten and the uart status register read.
+ */
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct dw8250_data {
+ int last_lcr;
+ int line;
+};
+
+static void dw8250_serial_out(struct uart_port *p, int offset, int value)
+{
+ struct dw8250_data *d = p->private_data;
+
+ if (offset == UART_LCR)
+ d->last_lcr = value;
+
+ offset <<= p->regshift;
+ writeb(value, p->membase + offset);
+}
+
+static unsigned int dw8250_serial_in(struct uart_port *p, int offset)
+{
+ offset <<= p->regshift;
+
+ return readb(p->membase + offset);
+}
+
+static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
+{
+ struct dw8250_data *d = p->private_data;
+
+ if (offset == UART_LCR)
+ d->last_lcr = value;
+
+ offset <<= p->regshift;
+ writel(value, p->membase + offset);
+}
+
+static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
+{
+ offset <<= p->regshift;
+
+ return readl(p->membase + offset);
+}
+
+/* Offset for the DesignWare's UART Status Register. */
+#define UART_USR 0x1f
+
+static int dw8250_handle_irq(struct uart_port *p)
+{
+ struct dw8250_data *d = p->private_data;
+ unsigned int iir = p->serial_in(p, UART_IIR);
+
+ if (serial8250_handle_irq(p, iir)) {
+ return 1;
+ } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
+ /* Clear the USR and write the LCR again. */
+ (void)p->serial_in(p, UART_USR);
+ p->serial_out(p, d->last_lcr, UART_LCR);
+
+ return 1;
+ }
+
+ return 0;
+}
+
+static int __devinit dw8250_probe(struct platform_device *pdev)
+{
+ struct uart_port port = {};
+ struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ struct device_node *np = pdev->dev.of_node;
+ u32 val;
+ struct dw8250_data *data;
+
+ if (!regs || !irq) {
+ dev_err(&pdev->dev, "no registers/irq defined\n");
+ return -EINVAL;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+ port.private_data = data;
+
+ spin_lock_init(&port.lock);
+ port.mapbase = regs->start;
+ port.irq = irq->start;
+ port.handle_irq = dw8250_handle_irq;
+ port.type = PORT_8250;
+ port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+ UPF_FIXED_PORT | UPF_FIXED_TYPE;
+ port.dev = &pdev->dev;
+
+ port.iotype = UPIO_MEM;
+ port.serial_in = dw8250_serial_in;
+ port.serial_out = dw8250_serial_out;
+ if (!of_property_read_u32(np, "reg-io-width", &val)) {
+ switch (val) {
+ case 1:
+ break;
+ case 4:
+ port.iotype = UPIO_MEM32;
+ port.serial_in = dw8250_serial_in32;
+ port.serial_out = dw8250_serial_out32;
+ break;
+ default:
+ dev_err(&pdev->dev, "unsupported reg-io-width (%u)\n",
+ val);
+ return -EINVAL;
+ }
+ }
+
+ if (!of_property_read_u32(np, "reg-shift", &val))
+ port.regshift = val;
+
+ if (of_property_read_u32(np, "clock-frequency", &val)) {
+ dev_err(&pdev->dev, "no clock-frequency property set\n");
+ return -EINVAL;
+ }
+ port.uartclk = val;
+
+ data->line = serial8250_register_port(&port);
+ if (data->line < 0)
+ return data->line;
+
+ platform_set_drvdata(pdev, data);
+
+ return 0;
+}
+
+static int __devexit dw8250_remove(struct platform_device *pdev)
+{
+ struct dw8250_data *data = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(data->line);
+
+ return 0;
+}
+
+static const struct of_device_id dw8250_match[] = {
+ { .compatible = "snps,dw-apb-uart" },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, dw8250_match);
+
+static struct platform_driver dw8250_platform_driver = {
+ .driver = {
+ .name = "dw-apb-uart",
+ .owner = THIS_MODULE,
+ .of_match_table = dw8250_match,
+ },
+ .probe = dw8250_probe,
+ .remove = __devexit_p(dw8250_remove),
+};
+
+module_platform_driver(dw8250_platform_driver);
+
+MODULE_AUTHOR("Jamie Iles");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Synopsys DesignWare 8250 serial port driver");
--- /dev/null
+/*
+ * Early serial console for 8250/16550 devices
+ *
+ * (c) Copyright 2004 Hewlett-Packard Development Company, L.P.
+ * Bjorn Helgaas <bjorn.helgaas@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Based on the 8250.c serial driver, Copyright (C) 2001 Russell King,
+ * and on early_printk.c by Andi Kleen.
+ *
+ * This is for use before the serial driver has initialized, in
+ * particular, before the UARTs have been discovered and named.
+ * Instead of specifying the console device as, e.g., "ttyS0",
+ * we locate the device directly by its MMIO or I/O port address.
+ *
+ * The user can specify the device directly, e.g.,
+ * earlycon=uart8250,io,0x3f8,9600n8
+ * earlycon=uart8250,mmio,0xff5e0000,115200n8
+ * earlycon=uart8250,mmio32,0xff5e0000,115200n8
+ * or
+ * console=uart8250,io,0x3f8,9600n8
+ * console=uart8250,mmio,0xff5e0000,115200n8
+ * console=uart8250,mmio32,0xff5e0000,115200n8
+ */
+
+#include <linux/tty.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <asm/io.h>
+#include <asm/serial.h>
+#ifdef CONFIG_FIX_EARLYCON_MEM
+#include <asm/pgtable.h>
+#include <asm/fixmap.h>
+#endif
+
+struct early_serial8250_device {
+ struct uart_port port;
+ char options[16]; /* e.g., 115200n8 */
+ unsigned int baud;
+};
+
+static struct early_serial8250_device early_device;
+
+static unsigned int __init serial_in(struct uart_port *port, int offset)
+{
+ switch (port->iotype) {
+ case UPIO_MEM:
+ return readb(port->membase + offset);
+ case UPIO_MEM32:
+ return readl(port->membase + (offset << 2));
+ case UPIO_PORT:
+ return inb(port->iobase + offset);
+ default:
+ return 0;
+ }
+}
+
+static void __init serial_out(struct uart_port *port, int offset, int value)
+{
+ switch (port->iotype) {
+ case UPIO_MEM:
+ writeb(value, port->membase + offset);
+ break;
+ case UPIO_MEM32:
+ writel(value, port->membase + (offset << 2));
+ break;
+ case UPIO_PORT:
+ outb(value, port->iobase + offset);
+ break;
+ }
+}
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+static void __init wait_for_xmitr(struct uart_port *port)
+{
+ unsigned int status;
+
+ for (;;) {
+ status = serial_in(port, UART_LSR);
+ if ((status & BOTH_EMPTY) == BOTH_EMPTY)
+ return;
+ cpu_relax();
+ }
+}
+
+static void __init serial_putc(struct uart_port *port, int c)
+{
+ wait_for_xmitr(port);
+ serial_out(port, UART_TX, c);
+}
+
+static void __init early_serial8250_write(struct console *console,
+ const char *s, unsigned int count)
+{
+ struct uart_port *port = &early_device.port;
+ unsigned int ier;
+
+ /* Save the IER and disable interrupts */
+ ier = serial_in(port, UART_IER);
+ serial_out(port, UART_IER, 0);
+
+ uart_console_write(port, s, count, serial_putc);
+
+ /* Wait for transmitter to become empty and restore the IER */
+ wait_for_xmitr(port);
+ serial_out(port, UART_IER, ier);
+}
+
+static unsigned int __init probe_baud(struct uart_port *port)
+{
+ unsigned char lcr, dll, dlm;
+ unsigned int quot;
+
+ lcr = serial_in(port, UART_LCR);
+ serial_out(port, UART_LCR, lcr | UART_LCR_DLAB);
+ dll = serial_in(port, UART_DLL);
+ dlm = serial_in(port, UART_DLM);
+ serial_out(port, UART_LCR, lcr);
+
+ quot = (dlm << 8) | dll;
+ return (port->uartclk / 16) / quot;
+}
+
+static void __init init_port(struct early_serial8250_device *device)
+{
+ struct uart_port *port = &device->port;
+ unsigned int divisor;
+ unsigned char c;
+
+ serial_out(port, UART_LCR, 0x3); /* 8n1 */
+ serial_out(port, UART_IER, 0); /* no interrupt */
+ serial_out(port, UART_FCR, 0); /* no fifo */
+ serial_out(port, UART_MCR, 0x3); /* DTR + RTS */
+
+ divisor = port->uartclk / (16 * device->baud);
+ c = serial_in(port, UART_LCR);
+ serial_out(port, UART_LCR, c | UART_LCR_DLAB);
+ serial_out(port, UART_DLL, divisor & 0xff);
+ serial_out(port, UART_DLM, (divisor >> 8) & 0xff);
+ serial_out(port, UART_LCR, c & ~UART_LCR_DLAB);
+}
+
+static int __init parse_options(struct early_serial8250_device *device,
+ char *options)
+{
+ struct uart_port *port = &device->port;
+ int mmio, mmio32, length;
+
+ if (!options)
+ return -ENODEV;
+
+ port->uartclk = BASE_BAUD * 16;
+
+ mmio = !strncmp(options, "mmio,", 5);
+ mmio32 = !strncmp(options, "mmio32,", 7);
+ if (mmio || mmio32) {
+ port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32);
+ port->mapbase = simple_strtoul(options + (mmio ? 5 : 7),
+ &options, 0);
+ if (mmio32)
+ port->regshift = 2;
+#ifdef CONFIG_FIX_EARLYCON_MEM
+ set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
+ port->mapbase & PAGE_MASK);
+ port->membase =
+ (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
+ port->membase += port->mapbase & ~PAGE_MASK;
+#else
+ port->membase = ioremap_nocache(port->mapbase, 64);
+ if (!port->membase) {
+ printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
+ __func__,
+ (unsigned long long) port->mapbase);
+ return -ENOMEM;
+ }
+#endif
+ } else if (!strncmp(options, "io,", 3)) {
+ port->iotype = UPIO_PORT;
+ port->iobase = simple_strtoul(options + 3, &options, 0);
+ mmio = 0;
+ } else
+ return -EINVAL;
+
+ options = strchr(options, ',');
+ if (options) {
+ options++;
+ device->baud = simple_strtoul(options, NULL, 0);
+ length = min(strcspn(options, " "), sizeof(device->options));
+ strncpy(device->options, options, length);
+ } else {
+ device->baud = probe_baud(port);
+ snprintf(device->options, sizeof(device->options), "%u",
+ device->baud);
+ }
+
+ if (mmio || mmio32)
+ printk(KERN_INFO
+ "Early serial console at MMIO%s 0x%llx (options '%s')\n",
+ mmio32 ? "32" : "",
+ (unsigned long long)port->mapbase,
+ device->options);
+ else
+ printk(KERN_INFO
+ "Early serial console at I/O port 0x%lx (options '%s')\n",
+ port->iobase,
+ device->options);
+
+ return 0;
+}
+
+static struct console early_serial8250_console __initdata = {
+ .name = "uart",
+ .write = early_serial8250_write,
+ .flags = CON_PRINTBUFFER | CON_BOOT,
+ .index = -1,
+};
+
+static int __init early_serial8250_setup(char *options)
+{
+ struct early_serial8250_device *device = &early_device;
+ int err;
+
+ if (device->port.membase || device->port.iobase)
+ return 0;
+
+ err = parse_options(device, options);
+ if (err < 0)
+ return err;
+
+ init_port(device);
+ return 0;
+}
+
+int __init setup_early_serial8250_console(char *cmdline)
+{
+ char *options;
+ int err;
+
+ options = strstr(cmdline, "uart8250,");
+ if (!options) {
+ options = strstr(cmdline, "uart,");
+ if (!options)
+ return 0;
+ }
+
+ options = strchr(cmdline, ',') + 1;
+ err = early_serial8250_setup(options);
+ if (err < 0)
+ return err;
+
+ register_console(&early_serial8250_console);
+
+ return 0;
+}
+
+int serial8250_find_port_for_earlycon(void)
+{
+ struct early_serial8250_device *device = &early_device;
+ struct uart_port *port = &device->port;
+ int line;
+ int ret;
+
+ if (!device->port.membase && !device->port.iobase)
+ return -ENODEV;
+
+ line = serial8250_find_port(port);
+ if (line < 0)
+ return -ENODEV;
+
+ ret = update_console_cmdline("uart", 8250,
+ "ttyS", line, device->options);
+ if (ret < 0)
+ ret = update_console_cmdline("uart", 0,
+ "ttyS", line, device->options);
+
+ return ret;
+}
+
+early_param("earlycon", setup_early_serial8250_console);
--- /dev/null
+/*
+ * Written by Paul B Schroeder < pschroeder "at" uplogix "dot" com >
+ * Based on 8250_boca.
+ *
+ * Copyright (C) 2005 Russell King.
+ * Data taken from include/asm-i386/serial.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#define PORT(_base,_irq) \
+ { \
+ .iobase = _base, \
+ .irq = _irq, \
+ .uartclk = 1843200, \
+ .iotype = UPIO_PORT, \
+ .flags = UPF_BOOT_AUTOCONF, \
+ }
+
+static struct plat_serial8250_port exar_data[] = {
+ PORT(0x100, 5),
+ PORT(0x108, 5),
+ PORT(0x110, 5),
+ PORT(0x118, 5),
+ { },
+};
+
+static struct platform_device exar_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_EXAR_ST16C554,
+ .dev = {
+ .platform_data = exar_data,
+ },
+};
+
+static int __init exar_init(void)
+{
+ return platform_device_register(&exar_device);
+}
+
+module_init(exar_init);
+
+MODULE_AUTHOR("Paul B Schroeder");
+MODULE_DESCRIPTION("8250 serial probe module for Exar cards");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Copyright (C) 2005 Russell King.
+ * Data taken from include/asm-i386/serial.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#define PORT(_base,_irq) \
+ { \
+ .iobase = _base, \
+ .irq = _irq, \
+ .uartclk = 1843200, \
+ .iotype = UPIO_PORT, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_FOURPORT, \
+ }
+
+static struct plat_serial8250_port fourport_data[] = {
+ PORT(0x1a0, 9),
+ PORT(0x1a8, 9),
+ PORT(0x1b0, 9),
+ PORT(0x1b8, 9),
+ PORT(0x2a0, 5),
+ PORT(0x2a8, 5),
+ PORT(0x2b0, 5),
+ PORT(0x2b8, 5),
+ { },
+};
+
+static struct platform_device fourport_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_FOURPORT,
+ .dev = {
+ .platform_data = fourport_data,
+ },
+};
+
+static int __init fourport_init(void)
+{
+ return platform_device_register(&fourport_device);
+}
+
+module_init(fourport_init);
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("8250 serial probe module for AST Fourport cards");
+MODULE_LICENSE("GPL");
--- /dev/null
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+
+#include "8250.h"
+
+/*
+ * Freescale 16550 UART "driver", Copyright (C) 2011 Paul Gortmaker.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This isn't a full driver; it just provides an alternate IRQ
+ * handler to deal with an errata. Everything else is just
+ * using the bog standard 8250 support.
+ *
+ * We follow code flow of serial8250_default_handle_irq() but add
+ * a check for a break and insert a dummy read on the Rx for the
+ * immediately following IRQ event.
+ *
+ * We re-use the already existing "bug handling" lsr_saved_flags
+ * field to carry the "what we just did" information from the one
+ * IRQ event to the next one.
+ */
+
+int fsl8250_handle_irq(struct uart_port *port)
+{
+ unsigned char lsr, orig_lsr;
+ unsigned long flags;
+ unsigned int iir;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ iir = port->serial_in(port, UART_IIR);
+ if (iir & UART_IIR_NO_INT) {
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return 0;
+ }
+
+ /* This is the WAR; if last event was BRK, then read and return */
+ if (unlikely(up->lsr_saved_flags & UART_LSR_BI)) {
+ up->lsr_saved_flags &= ~UART_LSR_BI;
+ port->serial_in(port, UART_RX);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return 1;
+ }
+
+ lsr = orig_lsr = up->port.serial_in(&up->port, UART_LSR);
+
+ if (lsr & (UART_LSR_DR | UART_LSR_BI))
+ lsr = serial8250_rx_chars(up, lsr);
+
+ serial8250_modem_status(up);
+
+ if (lsr & UART_LSR_THRE)
+ serial8250_tx_chars(up);
+
+ up->lsr_saved_flags = orig_lsr;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return 1;
+}
--- /dev/null
+/*
+ * Serial Device Initialisation for Lasi/Asp/Wax/Dino
+ *
+ * (c) Copyright Matthew Wilcox <willy@debian.org> 2001-2002
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/serial_core.h>
+#include <linux/signal.h>
+#include <linux/types.h>
+
+#include <asm/hardware.h>
+#include <asm/parisc-device.h>
+#include <asm/io.h>
+
+#include "8250.h"
+
+static int __init serial_init_chip(struct parisc_device *dev)
+{
+ struct uart_port port;
+ unsigned long address;
+ int err;
+
+ if (!dev->irq) {
+ /* We find some unattached serial ports by walking native
+ * busses. These should be silently ignored. Otherwise,
+ * what we have here is a missing parent device, so tell
+ * the user what they're missing.
+ */
+ if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
+ printk(KERN_INFO
+ "Serial: device 0x%llx not configured.\n"
+ "Enable support for Wax, Lasi, Asp or Dino.\n",
+ (unsigned long long)dev->hpa.start);
+ return -ENODEV;
+ }
+
+ address = dev->hpa.start;
+ if (dev->id.sversion != 0x8d)
+ address += 0x800;
+
+ memset(&port, 0, sizeof(port));
+ port.iotype = UPIO_MEM;
+ /* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */
+ port.uartclk = 7272727;
+ port.mapbase = address;
+ port.membase = ioremap_nocache(address, 16);
+ port.irq = dev->irq;
+ port.flags = UPF_BOOT_AUTOCONF;
+ port.dev = &dev->dev;
+
+ err = serial8250_register_port(&port);
+ if (err < 0) {
+ printk(KERN_WARNING
+ "serial8250_register_port returned error %d\n", err);
+ iounmap(port.membase);
+ return err;
+ }
+
+ return 0;
+}
+
+static struct parisc_device_id serial_tbl[] = {
+ { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 },
+ { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c },
+ { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d },
+ { 0 }
+};
+
+/* Hack. Some machines have SERIAL_0 attached to Lasi and SERIAL_1
+ * attached to Dino. Unfortunately, Dino appears before Lasi in the device
+ * tree. To ensure that ttyS0 == SERIAL_0, we register two drivers; one
+ * which only knows about Lasi and then a second which will find all the
+ * other serial ports. HPUX ignores this problem.
+ */
+static struct parisc_device_id lasi_tbl[] = {
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03B, 0x0008C }, /* C1xx/C1xxL */
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03C, 0x0008C }, /* B132L */
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03D, 0x0008C }, /* B160L */
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03E, 0x0008C }, /* B132L+ */
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03F, 0x0008C }, /* B180L+ */
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x046, 0x0008C }, /* Rocky2 120 */
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x047, 0x0008C }, /* Rocky2 150 */
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x04E, 0x0008C }, /* Kiji L2 132 */
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x056, 0x0008C }, /* Raven+ */
+ { 0 }
+};
+
+
+MODULE_DEVICE_TABLE(parisc, serial_tbl);
+
+static struct parisc_driver lasi_driver = {
+ .name = "serial_1",
+ .id_table = lasi_tbl,
+ .probe = serial_init_chip,
+};
+
+static struct parisc_driver serial_driver = {
+ .name = "serial",
+ .id_table = serial_tbl,
+ .probe = serial_init_chip,
+};
+
+static int __init probe_serial_gsc(void)
+{
+ register_parisc_driver(&lasi_driver);
+ register_parisc_driver(&serial_driver);
+ return 0;
+}
+
+module_init(probe_serial_gsc);
+
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Driver for the 98626/98644/internal serial interface on hp300/hp400
+ * (based on the National Semiconductor INS8250/NS16550AF/WD16C552 UARTs)
+ *
+ * Ported from 2.2 and modified to use the normal 8250 driver
+ * by Kars de Jong <jongk@linux-m68k.org>, May 2004.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/delay.h>
+#include <linux/dio.h>
+#include <linux/console.h>
+#include <linux/slab.h>
+#include <asm/io.h>
+
+#include "8250.h"
+
+#if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI)
+#warning CONFIG_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure?
+#endif
+
+#ifdef CONFIG_HPAPCI
+struct hp300_port
+{
+ struct hp300_port *next; /* next port */
+ int line; /* line (tty) number */
+};
+
+static struct hp300_port *hp300_ports;
+#endif
+
+#ifdef CONFIG_HPDCA
+
+static int __devinit hpdca_init_one(struct dio_dev *d,
+ const struct dio_device_id *ent);
+static void __devexit hpdca_remove_one(struct dio_dev *d);
+
+static struct dio_device_id hpdca_dio_tbl[] = {
+ { DIO_ID_DCA0 },
+ { DIO_ID_DCA0REM },
+ { DIO_ID_DCA1 },
+ { DIO_ID_DCA1REM },
+ { 0 }
+};
+
+static struct dio_driver hpdca_driver = {
+ .name = "hpdca",
+ .id_table = hpdca_dio_tbl,
+ .probe = hpdca_init_one,
+ .remove = __devexit_p(hpdca_remove_one),
+};
+
+#endif
+
+static unsigned int num_ports;
+
+extern int hp300_uart_scode;
+
+/* Offset to UART registers from base of DCA */
+#define UART_OFFSET 17
+
+#define DCA_ID 0x01 /* ID (read), reset (write) */
+#define DCA_IC 0x03 /* Interrupt control */
+
+/* Interrupt control */
+#define DCA_IC_IE 0x80 /* Master interrupt enable */
+
+#define HPDCA_BAUD_BASE 153600
+
+/* Base address of the Frodo part */
+#define FRODO_BASE (0x41c000)
+
+/*
+ * Where we find the 8250-like APCI ports, and how far apart they are.
+ */
+#define FRODO_APCIBASE 0x0
+#define FRODO_APCISPACE 0x20
+#define FRODO_APCI_OFFSET(x) (FRODO_APCIBASE + ((x) * FRODO_APCISPACE))
+
+#define HPAPCI_BAUD_BASE 500400
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+/*
+ * Parse the bootinfo to find descriptions for headless console and
+ * debug serial ports and register them with the 8250 driver.
+ * This function should be called before serial_console_init() is called
+ * to make sure the serial console will be available for use. IA-64 kernel
+ * calls this function from setup_arch() after the EFI and ACPI tables have
+ * been parsed.
+ */
+int __init hp300_setup_serial_console(void)
+{
+ int scode;
+ struct uart_port port;
+
+ memset(&port, 0, sizeof(port));
+
+ if (hp300_uart_scode < 0 || hp300_uart_scode > DIO_SCMAX)
+ return 0;
+
+ if (DIO_SCINHOLE(hp300_uart_scode))
+ return 0;
+
+ scode = hp300_uart_scode;
+
+ /* Memory mapped I/O */
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
+ port.type = PORT_UNKNOWN;
+
+ /* Check for APCI console */
+ if (scode == 256) {
+#ifdef CONFIG_HPAPCI
+ printk(KERN_INFO "Serial console is HP APCI 1\n");
+
+ port.uartclk = HPAPCI_BAUD_BASE * 16;
+ port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1));
+ port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
+ port.regshift = 2;
+ add_preferred_console("ttyS", port.line, "9600n8");
+#else
+ printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n");
+ return 0;
+#endif
+ } else {
+#ifdef CONFIG_HPDCA
+ unsigned long pa = dio_scodetophysaddr(scode);
+ if (!pa)
+ return 0;
+
+ printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode);
+
+ port.uartclk = HPDCA_BAUD_BASE * 16;
+ port.mapbase = (pa + UART_OFFSET);
+ port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
+ port.regshift = 1;
+ port.irq = DIO_IPL(pa + DIO_VIRADDRBASE);
+
+ /* Enable board-interrupts */
+ out_8(pa + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE);
+
+ if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80)
+ add_preferred_console("ttyS", port.line, "9600n8");
+#else
+ printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n");
+ return 0;
+#endif
+ }
+
+ if (early_serial_setup(&port) < 0)
+ printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n");
+ return 0;
+}
+#endif /* CONFIG_SERIAL_8250_CONSOLE */
+
+#ifdef CONFIG_HPDCA
+static int __devinit hpdca_init_one(struct dio_dev *d,
+ const struct dio_device_id *ent)
+{
+ struct uart_port port;
+ int line;
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ if (hp300_uart_scode == d->scode) {
+ /* Already got it. */
+ return 0;
+ }
+#endif
+ memset(&port, 0, sizeof(struct uart_port));
+
+ /* Memory mapped I/O */
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
+ port.irq = d->ipl;
+ port.uartclk = HPDCA_BAUD_BASE * 16;
+ port.mapbase = (d->resource.start + UART_OFFSET);
+ port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
+ port.regshift = 1;
+ port.dev = &d->dev;
+ line = serial8250_register_port(&port);
+
+ if (line < 0) {
+ printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
+ " irq %d failed\n", d->scode, port.irq);
+ return -ENOMEM;
+ }
+
+ /* Enable board-interrupts */
+ out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE);
+ dio_set_drvdata(d, (void *)line);
+
+ /* Reset the DCA */
+ out_8(d->resource.start + DIO_VIRADDRBASE + DCA_ID, 0xff);
+ udelay(100);
+
+ num_ports++;
+
+ return 0;
+}
+#endif
+
+static int __init hp300_8250_init(void)
+{
+ static int called;
+#ifdef CONFIG_HPAPCI
+ int line;
+ unsigned long base;
+ struct uart_port uport;
+ struct hp300_port *port;
+ int i;
+#endif
+ if (called)
+ return -ENODEV;
+ called = 1;
+
+ if (!MACH_IS_HP300)
+ return -ENODEV;
+
+#ifdef CONFIG_HPDCA
+ dio_register_driver(&hpdca_driver);
+#endif
+#ifdef CONFIG_HPAPCI
+ if (hp300_model < HP_400) {
+ if (!num_ports)
+ return -ENODEV;
+ return 0;
+ }
+ /* These models have the Frodo chip.
+ * Port 0 is reserved for the Apollo Domain keyboard.
+ * Port 1 is either the console or the DCA.
+ */
+ for (i = 1; i < 4; i++) {
+ /* Port 1 is the console on a 425e, on other machines it's
+ * mapped to DCA.
+ */
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ if (i == 1)
+ continue;
+#endif
+
+ /* Create new serial device */
+ port = kmalloc(sizeof(struct hp300_port), GFP_KERNEL);
+ if (!port)
+ return -ENOMEM;
+
+ memset(&uport, 0, sizeof(struct uart_port));
+
+ base = (FRODO_BASE + FRODO_APCI_OFFSET(i));
+
+ /* Memory mapped I/O */
+ uport.iotype = UPIO_MEM;
+ uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \
+ | UPF_BOOT_AUTOCONF;
+ /* XXX - no interrupt support yet */
+ uport.irq = 0;
+ uport.uartclk = HPAPCI_BAUD_BASE * 16;
+ uport.mapbase = base;
+ uport.membase = (char *)(base + DIO_VIRADDRBASE);
+ uport.regshift = 2;
+
+ line = serial8250_register_port(&uport);
+
+ if (line < 0) {
+ printk(KERN_NOTICE "8250_hp300: register_serial() APCI"
+ " %d irq %d failed\n", i, uport.irq);
+ kfree(port);
+ continue;
+ }
+
+ port->line = line;
+ port->next = hp300_ports;
+ hp300_ports = port;
+
+ num_ports++;
+ }
+#endif
+
+ /* Any boards found? */
+ if (!num_ports)
+ return -ENODEV;
+
+ return 0;
+}
+
+#ifdef CONFIG_HPDCA
+static void __devexit hpdca_remove_one(struct dio_dev *d)
+{
+ int line;
+
+ line = (int) dio_get_drvdata(d);
+ if (d->resource.start) {
+ /* Disable board-interrupts */
+ out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, 0);
+ }
+ serial8250_unregister_port(line);
+}
+#endif
+
+static void __exit hp300_8250_exit(void)
+{
+#ifdef CONFIG_HPAPCI
+ struct hp300_port *port, *to_free;
+
+ for (port = hp300_ports; port; ) {
+ serial8250_unregister_port(port->line);
+ to_free = port;
+ port = port->next;
+ kfree(to_free);
+ }
+
+ hp300_ports = NULL;
+#endif
+#ifdef CONFIG_HPDCA
+ dio_unregister_driver(&hpdca_driver);
+#endif
+}
+
+module_init(hp300_8250_init);
+module_exit(hp300_8250_exit);
+MODULE_DESCRIPTION("HP DCA/APCI serial driver");
+MODULE_AUTHOR("Kars de Jong <jongk@linux-m68k.org>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Copyright (C) 2005 Russell King.
+ * Data taken from include/asm-i386/serial.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#define HUB6(card,port) \
+ { \
+ .iobase = 0x302, \
+ .irq = 3, \
+ .uartclk = 1843200, \
+ .iotype = UPIO_HUB6, \
+ .flags = UPF_BOOT_AUTOCONF, \
+ .hub6 = (card) << 6 | (port) << 3 | 1, \
+ }
+
+static struct plat_serial8250_port hub6_data[] = {
+ HUB6(0, 0),
+ HUB6(0, 1),
+ HUB6(0, 2),
+ HUB6(0, 3),
+ HUB6(0, 4),
+ HUB6(0, 5),
+ HUB6(1, 0),
+ HUB6(1, 1),
+ HUB6(1, 2),
+ HUB6(1, 3),
+ HUB6(1, 4),
+ HUB6(1, 5),
+ { },
+};
+
+static struct platform_device hub6_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_HUB6,
+ .dev = {
+ .platform_data = hub6_data,
+ },
+};
+
+static int __init hub6_init(void)
+{
+ return platform_device_register(&hub6_device);
+}
+
+module_init(hub6_init);
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("8250 serial probe module for Hub6 cards");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Copyright (C) 2005 Russell King.
+ * Data taken from include/asm-i386/serial.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mca.h>
+#include <linux/serial_8250.h>
+
+/*
+ * FIXME: Should we be doing AUTO_IRQ here?
+ */
+#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
+#define MCA_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ
+#else
+#define MCA_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST
+#endif
+
+#define PORT(_base,_irq) \
+ { \
+ .iobase = _base, \
+ .irq = _irq, \
+ .uartclk = 1843200, \
+ .iotype = UPIO_PORT, \
+ .flags = MCA_FLAGS, \
+ }
+
+static struct plat_serial8250_port mca_data[] = {
+ PORT(0x3220, 3),
+ PORT(0x3228, 3),
+ PORT(0x4220, 3),
+ PORT(0x4228, 3),
+ PORT(0x5220, 3),
+ PORT(0x5228, 3),
+ { },
+};
+
+static struct platform_device mca_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_MCA,
+ .dev = {
+ .platform_data = mca_data,
+ },
+};
+
+static int __init mca_init(void)
+{
+ if (!MCA_bus)
+ return -ENODEV;
+ return platform_device_register(&mca_device);
+}
+
+module_init(mca_init);
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("8250 serial probe module for MCA ports");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Probe module for 8250/16550-type PCI serial ports.
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/8250_pci.h>
+#include <linux/bitops.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+
+#include "8250.h"
+
+#undef SERIAL_DEBUG_PCI
+
+/*
+ * init function returns:
+ * > 0 - number of ports
+ * = 0 - use board->num_ports
+ * < 0 - error
+ */
+struct pci_serial_quirk {
+ u32 vendor;
+ u32 device;
+ u32 subvendor;
+ u32 subdevice;
+ int (*probe)(struct pci_dev *dev);
+ int (*init)(struct pci_dev *dev);
+ int (*setup)(struct serial_private *,
+ const struct pciserial_board *,
+ struct uart_port *, int);
+ void (*exit)(struct pci_dev *dev);
+};
+
+#define PCI_NUM_BAR_RESOURCES 6
+
+struct serial_private {
+ struct pci_dev *dev;
+ unsigned int nr;
+ void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES];
+ struct pci_serial_quirk *quirk;
+ int line[0];
+};
+
+static int pci_default_setup(struct serial_private*,
+ const struct pciserial_board*, struct uart_port*, int);
+
+static void moan_device(const char *str, struct pci_dev *dev)
+{
+ printk(KERN_WARNING
+ "%s: %s\n"
+ "Please send the output of lspci -vv, this\n"
+ "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
+ "manufacturer and name of serial board or\n"
+ "modem board to rmk+serial@arm.linux.org.uk.\n",
+ pci_name(dev), str, dev->vendor, dev->device,
+ dev->subsystem_vendor, dev->subsystem_device);
+}
+
+static int
+setup_port(struct serial_private *priv, struct uart_port *port,
+ int bar, int offset, int regshift)
+{
+ struct pci_dev *dev = priv->dev;
+ unsigned long base, len;
+
+ if (bar >= PCI_NUM_BAR_RESOURCES)
+ return -EINVAL;
+
+ base = pci_resource_start(dev, bar);
+
+ if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
+ len = pci_resource_len(dev, bar);
+
+ if (!priv->remapped_bar[bar])
+ priv->remapped_bar[bar] = ioremap_nocache(base, len);
+ if (!priv->remapped_bar[bar])
+ return -ENOMEM;
+
+ port->iotype = UPIO_MEM;
+ port->iobase = 0;
+ port->mapbase = base + offset;
+ port->membase = priv->remapped_bar[bar] + offset;
+ port->regshift = regshift;
+ } else {
+ port->iotype = UPIO_PORT;
+ port->iobase = base + offset;
+ port->mapbase = 0;
+ port->membase = NULL;
+ port->regshift = 0;
+ }
+ return 0;
+}
+
+/*
+ * ADDI-DATA GmbH communication cards <info@addi-data.com>
+ */
+static int addidata_apci7800_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar = 0, offset = board->first_offset;
+ bar = FL_GET_BASE(board->flags);
+
+ if (idx < 2) {
+ offset += idx * board->uart_offset;
+ } else if ((idx >= 2) && (idx < 4)) {
+ bar += 1;
+ offset += ((idx - 2) * board->uart_offset);
+ } else if ((idx >= 4) && (idx < 6)) {
+ bar += 2;
+ offset += ((idx - 4) * board->uart_offset);
+ } else if (idx >= 6) {
+ bar += 3;
+ offset += ((idx - 6) * board->uart_offset);
+ }
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+/*
+ * AFAVLAB uses a different mixture of BARs and offsets
+ * Not that ugly ;) -- HW
+ */
+static int
+afavlab_setup(struct serial_private *priv, const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset;
+
+ bar = FL_GET_BASE(board->flags);
+ if (idx < 4)
+ bar += idx;
+ else {
+ bar = 4;
+ offset += (idx - 4) * board->uart_offset;
+ }
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+/*
+ * HP's Remote Management Console. The Diva chip came in several
+ * different versions. N-class, L2000 and A500 have two Diva chips, each
+ * with 3 UARTs (the third UART on the second chip is unused). Superdome
+ * and Keystone have one Diva chip with 3 UARTs. Some later machines have
+ * one Diva chip, but it has been expanded to 5 UARTs.
+ */
+static int pci_hp_diva_init(struct pci_dev *dev)
+{
+ int rc = 0;
+
+ switch (dev->subsystem_device) {
+ case PCI_DEVICE_ID_HP_DIVA_TOSCA1:
+ case PCI_DEVICE_ID_HP_DIVA_HALFDOME:
+ case PCI_DEVICE_ID_HP_DIVA_KEYSTONE:
+ case PCI_DEVICE_ID_HP_DIVA_EVEREST:
+ rc = 3;
+ break;
+ case PCI_DEVICE_ID_HP_DIVA_TOSCA2:
+ rc = 2;
+ break;
+ case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
+ rc = 4;
+ break;
+ case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
+ case PCI_DEVICE_ID_HP_DIVA_HURRICANE:
+ rc = 1;
+ break;
+ }
+
+ return rc;
+}
+
+/*
+ * HP's Diva chip puts the 4th/5th serial port further out, and
+ * some serial ports are supposed to be hidden on certain models.
+ */
+static int
+pci_hp_diva_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int offset = board->first_offset;
+ unsigned int bar = FL_GET_BASE(board->flags);
+
+ switch (priv->dev->subsystem_device) {
+ case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
+ if (idx == 3)
+ idx++;
+ break;
+ case PCI_DEVICE_ID_HP_DIVA_EVEREST:
+ if (idx > 0)
+ idx++;
+ if (idx > 2)
+ idx++;
+ break;
+ }
+ if (idx > 2)
+ offset = 0x18;
+
+ offset += idx * board->uart_offset;
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+/*
+ * Added for EKF Intel i960 serial boards
+ */
+static int pci_inteli960ni_init(struct pci_dev *dev)
+{
+ unsigned long oldval;
+
+ if (!(dev->subsystem_device & 0x1000))
+ return -ENODEV;
+
+ /* is firmware started? */
+ pci_read_config_dword(dev, 0x44, (void *)&oldval);
+ if (oldval == 0x00001000L) { /* RESET value */
+ printk(KERN_DEBUG "Local i960 firmware missing");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+/*
+ * Some PCI serial cards using the PLX 9050 PCI interface chip require
+ * that the card interrupt be explicitly enabled or disabled. This
+ * seems to be mainly needed on card using the PLX which also use I/O
+ * mapped memory.
+ */
+static int pci_plx9050_init(struct pci_dev *dev)
+{
+ u8 irq_config;
+ void __iomem *p;
+
+ if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) {
+ moan_device("no memory in bar 0", dev);
+ return 0;
+ }
+
+ irq_config = 0x41;
+ if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
+ dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS)
+ irq_config = 0x43;
+
+ if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
+ (dev->device == PCI_DEVICE_ID_PLX_ROMULUS))
+ /*
+ * As the megawolf cards have the int pins active
+ * high, and have 2 UART chips, both ints must be
+ * enabled on the 9050. Also, the UARTS are set in
+ * 16450 mode by default, so we have to enable the
+ * 16C950 'enhanced' mode so that we can use the
+ * deep FIFOs
+ */
+ irq_config = 0x5b;
+ /*
+ * enable/disable interrupts
+ */
+ p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
+ if (p == NULL)
+ return -ENOMEM;
+ writel(irq_config, p + 0x4c);
+
+ /*
+ * Read the register back to ensure that it took effect.
+ */
+ readl(p + 0x4c);
+ iounmap(p);
+
+ return 0;
+}
+
+static void __devexit pci_plx9050_exit(struct pci_dev *dev)
+{
+ u8 __iomem *p;
+
+ if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0)
+ return;
+
+ /*
+ * disable interrupts
+ */
+ p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
+ if (p != NULL) {
+ writel(0, p + 0x4c);
+
+ /*
+ * Read the register back to ensure that it took effect.
+ */
+ readl(p + 0x4c);
+ iounmap(p);
+ }
+}
+
+#define NI8420_INT_ENABLE_REG 0x38
+#define NI8420_INT_ENABLE_BIT 0x2000
+
+static void __devexit pci_ni8420_exit(struct pci_dev *dev)
+{
+ void __iomem *p;
+ unsigned long base, len;
+ unsigned int bar = 0;
+
+ if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
+ moan_device("no memory in bar", dev);
+ return;
+ }
+
+ base = pci_resource_start(dev, bar);
+ len = pci_resource_len(dev, bar);
+ p = ioremap_nocache(base, len);
+ if (p == NULL)
+ return;
+
+ /* Disable the CPU Interrupt */
+ writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT),
+ p + NI8420_INT_ENABLE_REG);
+ iounmap(p);
+}
+
+
+/* MITE registers */
+#define MITE_IOWBSR1 0xc4
+#define MITE_IOWCR1 0xf4
+#define MITE_LCIMR1 0x08
+#define MITE_LCIMR2 0x10
+
+#define MITE_LCIMR2_CLR_CPU_IE (1 << 30)
+
+static void __devexit pci_ni8430_exit(struct pci_dev *dev)
+{
+ void __iomem *p;
+ unsigned long base, len;
+ unsigned int bar = 0;
+
+ if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
+ moan_device("no memory in bar", dev);
+ return;
+ }
+
+ base = pci_resource_start(dev, bar);
+ len = pci_resource_len(dev, bar);
+ p = ioremap_nocache(base, len);
+ if (p == NULL)
+ return;
+
+ /* Disable the CPU Interrupt */
+ writel(MITE_LCIMR2_CLR_CPU_IE, p + MITE_LCIMR2);
+ iounmap(p);
+}
+
+/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
+static int
+sbs_setup(struct serial_private *priv, const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset;
+
+ bar = 0;
+
+ if (idx < 4) {
+ /* first four channels map to 0, 0x100, 0x200, 0x300 */
+ offset += idx * board->uart_offset;
+ } else if (idx < 8) {
+ /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */
+ offset += idx * board->uart_offset + 0xC00;
+ } else /* we have only 8 ports on PMC-OCTALPRO */
+ return 1;
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+/*
+* This does initialization for PMC OCTALPRO cards:
+* maps the device memory, resets the UARTs (needed, bc
+* if the module is removed and inserted again, the card
+* is in the sleep mode) and enables global interrupt.
+*/
+
+/* global control register offset for SBS PMC-OctalPro */
+#define OCT_REG_CR_OFF 0x500
+
+static int sbs_init(struct pci_dev *dev)
+{
+ u8 __iomem *p;
+
+ p = pci_ioremap_bar(dev, 0);
+
+ if (p == NULL)
+ return -ENOMEM;
+ /* Set bit-4 Control Register (UART RESET) in to reset the uarts */
+ writeb(0x10, p + OCT_REG_CR_OFF);
+ udelay(50);
+ writeb(0x0, p + OCT_REG_CR_OFF);
+
+ /* Set bit-2 (INTENABLE) of Control Register */
+ writeb(0x4, p + OCT_REG_CR_OFF);
+ iounmap(p);
+
+ return 0;
+}
+
+/*
+ * Disables the global interrupt of PMC-OctalPro
+ */
+
+static void __devexit sbs_exit(struct pci_dev *dev)
+{
+ u8 __iomem *p;
+
+ p = pci_ioremap_bar(dev, 0);
+ /* FIXME: What if resource_len < OCT_REG_CR_OFF */
+ if (p != NULL)
+ writeb(0, p + OCT_REG_CR_OFF);
+ iounmap(p);
+}
+
+/*
+ * SIIG serial cards have an PCI interface chip which also controls
+ * the UART clocking frequency. Each UART can be clocked independently
+ * (except cards equipped with 4 UARTs) and initial clocking settings
+ * are stored in the EEPROM chip. It can cause problems because this
+ * version of serial driver doesn't support differently clocked UART's
+ * on single PCI card. To prevent this, initialization functions set
+ * high frequency clocking for all UART's on given card. It is safe (I
+ * hope) because it doesn't touch EEPROM settings to prevent conflicts
+ * with other OSes (like M$ DOS).
+ *
+ * SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
+ *
+ * There is two family of SIIG serial cards with different PCI
+ * interface chip and different configuration methods:
+ * - 10x cards have control registers in IO and/or memory space;
+ * - 20x cards have control registers in standard PCI configuration space.
+ *
+ * Note: all 10x cards have PCI device ids 0x10..
+ * all 20x cards have PCI device ids 0x20..
+ *
+ * There are also Quartet Serial cards which use Oxford Semiconductor
+ * 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
+ *
+ * Note: some SIIG cards are probed by the parport_serial object.
+ */
+
+#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
+#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
+
+static int pci_siig10x_init(struct pci_dev *dev)
+{
+ u16 data;
+ void __iomem *p;
+
+ switch (dev->device & 0xfff8) {
+ case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */
+ data = 0xffdf;
+ break;
+ case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */
+ data = 0xf7ff;
+ break;
+ default: /* 1S1P, 4S */
+ data = 0xfffb;
+ break;
+ }
+
+ p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
+ if (p == NULL)
+ return -ENOMEM;
+
+ writew(readw(p + 0x28) & data, p + 0x28);
+ readw(p + 0x28);
+ iounmap(p);
+ return 0;
+}
+
+#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
+#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
+
+static int pci_siig20x_init(struct pci_dev *dev)
+{
+ u8 data;
+
+ /* Change clock frequency for the first UART. */
+ pci_read_config_byte(dev, 0x6f, &data);
+ pci_write_config_byte(dev, 0x6f, data & 0xef);
+
+ /* If this card has 2 UART, we have to do the same with second UART. */
+ if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
+ ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
+ pci_read_config_byte(dev, 0x73, &data);
+ pci_write_config_byte(dev, 0x73, data & 0xef);
+ }
+ return 0;
+}
+
+static int pci_siig_init(struct pci_dev *dev)
+{
+ unsigned int type = dev->device & 0xff00;
+
+ if (type == 0x1000)
+ return pci_siig10x_init(dev);
+ else if (type == 0x2000)
+ return pci_siig20x_init(dev);
+
+ moan_device("Unknown SIIG card", dev);
+ return -ENODEV;
+}
+
+static int pci_siig_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
+
+ if (idx > 3) {
+ bar = 4;
+ offset = (idx - 4) * 8;
+ }
+
+ return setup_port(priv, port, bar, offset, 0);
+}
+
+/*
+ * Timedia has an explosion of boards, and to avoid the PCI table from
+ * growing *huge*, we use this function to collapse some 70 entries
+ * in the PCI table into one, for sanity's and compactness's sake.
+ */
+static const unsigned short timedia_single_port[] = {
+ 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
+};
+
+static const unsigned short timedia_dual_port[] = {
+ 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
+ 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
+ 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
+ 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
+ 0xD079, 0
+};
+
+static const unsigned short timedia_quad_port[] = {
+ 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
+ 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
+ 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
+ 0xB157, 0
+};
+
+static const unsigned short timedia_eight_port[] = {
+ 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
+ 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
+};
+
+static const struct timedia_struct {
+ int num;
+ const unsigned short *ids;
+} timedia_data[] = {
+ { 1, timedia_single_port },
+ { 2, timedia_dual_port },
+ { 4, timedia_quad_port },
+ { 8, timedia_eight_port }
+};
+
+/*
+ * There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of
+ * listing them individually, this driver merely grabs them all with
+ * PCI_ANY_ID. Some of these devices, however, also feature a parallel port,
+ * and should be left free to be claimed by parport_serial instead.
+ */
+static int pci_timedia_probe(struct pci_dev *dev)
+{
+ /*
+ * Check the third digit of the subdevice ID
+ * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel)
+ */
+ if ((dev->subsystem_device & 0x00f0) >= 0x70) {
+ dev_info(&dev->dev,
+ "ignoring Timedia subdevice %04x for parport_serial\n",
+ dev->subsystem_device);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int pci_timedia_init(struct pci_dev *dev)
+{
+ const unsigned short *ids;
+ int i, j;
+
+ for (i = 0; i < ARRAY_SIZE(timedia_data); i++) {
+ ids = timedia_data[i].ids;
+ for (j = 0; ids[j]; j++)
+ if (dev->subsystem_device == ids[j])
+ return timedia_data[i].num;
+ }
+ return 0;
+}
+
+/*
+ * Timedia/SUNIX uses a mixture of BARs and offsets
+ * Ugh, this is ugly as all hell --- TYT
+ */
+static int
+pci_timedia_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar = 0, offset = board->first_offset;
+
+ switch (idx) {
+ case 0:
+ bar = 0;
+ break;
+ case 1:
+ offset = board->uart_offset;
+ bar = 0;
+ break;
+ case 2:
+ bar = 1;
+ break;
+ case 3:
+ offset = board->uart_offset;
+ /* FALLTHROUGH */
+ case 4: /* BAR 2 */
+ case 5: /* BAR 3 */
+ case 6: /* BAR 4 */
+ case 7: /* BAR 5 */
+ bar = idx - 2;
+ }
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+/*
+ * Some Titan cards are also a little weird
+ */
+static int
+titan_400l_800l_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset;
+
+ switch (idx) {
+ case 0:
+ bar = 1;
+ break;
+ case 1:
+ bar = 2;
+ break;
+ default:
+ bar = 4;
+ offset = (idx - 2) * board->uart_offset;
+ }
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+static int pci_xircom_init(struct pci_dev *dev)
+{
+ msleep(100);
+ return 0;
+}
+
+static int pci_ni8420_init(struct pci_dev *dev)
+{
+ void __iomem *p;
+ unsigned long base, len;
+ unsigned int bar = 0;
+
+ if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
+ moan_device("no memory in bar", dev);
+ return 0;
+ }
+
+ base = pci_resource_start(dev, bar);
+ len = pci_resource_len(dev, bar);
+ p = ioremap_nocache(base, len);
+ if (p == NULL)
+ return -ENOMEM;
+
+ /* Enable CPU Interrupt */
+ writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT,
+ p + NI8420_INT_ENABLE_REG);
+
+ iounmap(p);
+ return 0;
+}
+
+#define MITE_IOWBSR1_WSIZE 0xa
+#define MITE_IOWBSR1_WIN_OFFSET 0x800
+#define MITE_IOWBSR1_WENAB (1 << 7)
+#define MITE_LCIMR1_IO_IE_0 (1 << 24)
+#define MITE_LCIMR2_SET_CPU_IE (1 << 31)
+#define MITE_IOWCR1_RAMSEL_MASK 0xfffffffe
+
+static int pci_ni8430_init(struct pci_dev *dev)
+{
+ void __iomem *p;
+ unsigned long base, len;
+ u32 device_window;
+ unsigned int bar = 0;
+
+ if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
+ moan_device("no memory in bar", dev);
+ return 0;
+ }
+
+ base = pci_resource_start(dev, bar);
+ len = pci_resource_len(dev, bar);
+ p = ioremap_nocache(base, len);
+ if (p == NULL)
+ return -ENOMEM;
+
+ /* Set device window address and size in BAR0 */
+ device_window = ((base + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00)
+ | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
+ writel(device_window, p + MITE_IOWBSR1);
+
+ /* Set window access to go to RAMSEL IO address space */
+ writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK),
+ p + MITE_IOWCR1);
+
+ /* Enable IO Bus Interrupt 0 */
+ writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1);
+
+ /* Enable CPU Interrupt */
+ writel(MITE_LCIMR2_SET_CPU_IE, p + MITE_LCIMR2);
+
+ iounmap(p);
+ return 0;
+}
+
+/* UART Port Control Register */
+#define NI8430_PORTCON 0x0f
+#define NI8430_PORTCON_TXVR_ENABLE (1 << 3)
+
+static int
+pci_ni8430_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ void __iomem *p;
+ unsigned long base, len;
+ unsigned int bar, offset = board->first_offset;
+
+ if (idx >= board->num_ports)
+ return 1;
+
+ bar = FL_GET_BASE(board->flags);
+ offset += idx * board->uart_offset;
+
+ base = pci_resource_start(priv->dev, bar);
+ len = pci_resource_len(priv->dev, bar);
+ p = ioremap_nocache(base, len);
+
+ /* enable the transceiver */
+ writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE,
+ p + offset + NI8430_PORTCON);
+
+ iounmap(p);
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+static int pci_netmos_9900_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar;
+
+ if ((priv->dev->subsystem_device & 0xff00) == 0x3000) {
+ /* netmos apparently orders BARs by datasheet layout, so serial
+ * ports get BARs 0 and 3 (or 1 and 4 for memmapped)
+ */
+ bar = 3 * idx;
+
+ return setup_port(priv, port, bar, 0, board->reg_shift);
+ } else {
+ return pci_default_setup(priv, board, port, idx);
+ }
+}
+
+/* the 99xx series comes with a range of device IDs and a variety
+ * of capabilities:
+ *
+ * 9900 has varying capabilities and can cascade to sub-controllers
+ * (cascading should be purely internal)
+ * 9904 is hardwired with 4 serial ports
+ * 9912 and 9922 are hardwired with 2 serial ports
+ */
+static int pci_netmos_9900_numports(struct pci_dev *dev)
+{
+ unsigned int c = dev->class;
+ unsigned int pi;
+ unsigned short sub_serports;
+
+ pi = (c & 0xff);
+
+ if (pi == 2) {
+ return 1;
+ } else if ((pi == 0) &&
+ (dev->device == PCI_DEVICE_ID_NETMOS_9900)) {
+ /* two possibilities: 0x30ps encodes number of parallel and
+ * serial ports, or 0x1000 indicates *something*. This is not
+ * immediately obvious, since the 2s1p+4s configuration seems
+ * to offer all functionality on functions 0..2, while still
+ * advertising the same function 3 as the 4s+2s1p config.
+ */
+ sub_serports = dev->subsystem_device & 0xf;
+ if (sub_serports > 0) {
+ return sub_serports;
+ } else {
+ printk(KERN_NOTICE "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
+ return 0;
+ }
+ }
+
+ moan_device("unknown NetMos/Mostech program interface", dev);
+ return 0;
+}
+
+static int pci_netmos_init(struct pci_dev *dev)
+{
+ /* subdevice 0x00PS means <P> parallel, <S> serial */
+ unsigned int num_serial = dev->subsystem_device & 0xf;
+
+ if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) ||
+ (dev->device == PCI_DEVICE_ID_NETMOS_9865))
+ return 0;
+
+ if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
+ dev->subsystem_device == 0x0299)
+ return 0;
+
+ switch (dev->device) { /* FALLTHROUGH on all */
+ case PCI_DEVICE_ID_NETMOS_9904:
+ case PCI_DEVICE_ID_NETMOS_9912:
+ case PCI_DEVICE_ID_NETMOS_9922:
+ case PCI_DEVICE_ID_NETMOS_9900:
+ num_serial = pci_netmos_9900_numports(dev);
+ break;
+
+ default:
+ if (num_serial == 0 ) {
+ moan_device("unknown NetMos/Mostech device", dev);
+ }
+ }
+
+ if (num_serial == 0)
+ return -ENODEV;
+
+ return num_serial;
+}
+
+/*
+ * These chips are available with optionally one parallel port and up to
+ * two serial ports. Unfortunately they all have the same product id.
+ *
+ * Basic configuration is done over a region of 32 I/O ports. The base
+ * ioport is called INTA or INTC, depending on docs/other drivers.
+ *
+ * The region of the 32 I/O ports is configured in POSIO0R...
+ */
+
+/* registers */
+#define ITE_887x_MISCR 0x9c
+#define ITE_887x_INTCBAR 0x78
+#define ITE_887x_UARTBAR 0x7c
+#define ITE_887x_PS0BAR 0x10
+#define ITE_887x_POSIO0 0x60
+
+/* I/O space size */
+#define ITE_887x_IOSIZE 32
+/* I/O space size (bits 26-24; 8 bytes = 011b) */
+#define ITE_887x_POSIO_IOSIZE_8 (3 << 24)
+/* I/O space size (bits 26-24; 32 bytes = 101b) */
+#define ITE_887x_POSIO_IOSIZE_32 (5 << 24)
+/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */
+#define ITE_887x_POSIO_SPEED (3 << 29)
+/* enable IO_Space bit */
+#define ITE_887x_POSIO_ENABLE (1 << 31)
+
+static int pci_ite887x_init(struct pci_dev *dev)
+{
+ /* inta_addr are the configuration addresses of the ITE */
+ static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0,
+ 0x200, 0x280, 0 };
+ int ret, i, type;
+ struct resource *iobase = NULL;
+ u32 miscr, uartbar, ioport;
+
+ /* search for the base-ioport */
+ i = 0;
+ while (inta_addr[i] && iobase == NULL) {
+ iobase = request_region(inta_addr[i], ITE_887x_IOSIZE,
+ "ite887x");
+ if (iobase != NULL) {
+ /* write POSIO0R - speed | size | ioport */
+ pci_write_config_dword(dev, ITE_887x_POSIO0,
+ ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
+ ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]);
+ /* write INTCBAR - ioport */
+ pci_write_config_dword(dev, ITE_887x_INTCBAR,
+ inta_addr[i]);
+ ret = inb(inta_addr[i]);
+ if (ret != 0xff) {
+ /* ioport connected */
+ break;
+ }
+ release_region(iobase->start, ITE_887x_IOSIZE);
+ iobase = NULL;
+ }
+ i++;
+ }
+
+ if (!inta_addr[i]) {
+ printk(KERN_ERR "ite887x: could not find iobase\n");
+ return -ENODEV;
+ }
+
+ /* start of undocumented type checking (see parport_pc.c) */
+ type = inb(iobase->start + 0x18) & 0x0f;
+
+ switch (type) {
+ case 0x2: /* ITE8871 (1P) */
+ case 0xa: /* ITE8875 (1P) */
+ ret = 0;
+ break;
+ case 0xe: /* ITE8872 (2S1P) */
+ ret = 2;
+ break;
+ case 0x6: /* ITE8873 (1S) */
+ ret = 1;
+ break;
+ case 0x8: /* ITE8874 (2S) */
+ ret = 2;
+ break;
+ default:
+ moan_device("Unknown ITE887x", dev);
+ ret = -ENODEV;
+ }
+
+ /* configure all serial ports */
+ for (i = 0; i < ret; i++) {
+ /* read the I/O port from the device */
+ pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)),
+ &ioport);
+ ioport &= 0x0000FF00; /* the actual base address */
+ pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)),
+ ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
+ ITE_887x_POSIO_IOSIZE_8 | ioport);
+
+ /* write the ioport to the UARTBAR */
+ pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar);
+ uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */
+ uartbar |= (ioport << (16 * i)); /* set the ioport */
+ pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar);
+
+ /* get current config */
+ pci_read_config_dword(dev, ITE_887x_MISCR, &miscr);
+ /* disable interrupts (UARTx_Routing[3:0]) */
+ miscr &= ~(0xf << (12 - 4 * i));
+ /* activate the UART (UARTx_En) */
+ miscr |= 1 << (23 - i);
+ /* write new config with activated UART */
+ pci_write_config_dword(dev, ITE_887x_MISCR, miscr);
+ }
+
+ if (ret <= 0) {
+ /* the device has no UARTs if we get here */
+ release_region(iobase->start, ITE_887x_IOSIZE);
+ }
+
+ return ret;
+}
+
+static void __devexit pci_ite887x_exit(struct pci_dev *dev)
+{
+ u32 ioport;
+ /* the ioport is bit 0-15 in POSIO0R */
+ pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport);
+ ioport &= 0xffff;
+ release_region(ioport, ITE_887x_IOSIZE);
+}
+
+/*
+ * Oxford Semiconductor Inc.
+ * Check that device is part of the Tornado range of devices, then determine
+ * the number of ports available on the device.
+ */
+static int pci_oxsemi_tornado_init(struct pci_dev *dev)
+{
+ u8 __iomem *p;
+ unsigned long deviceID;
+ unsigned int number_uarts = 0;
+
+ /* OxSemi Tornado devices are all 0xCxxx */
+ if (dev->vendor == PCI_VENDOR_ID_OXSEMI &&
+ (dev->device & 0xF000) != 0xC000)
+ return 0;
+
+ p = pci_iomap(dev, 0, 5);
+ if (p == NULL)
+ return -ENOMEM;
+
+ deviceID = ioread32(p);
+ /* Tornado device */
+ if (deviceID == 0x07000200) {
+ number_uarts = ioread8(p + 4);
+ printk(KERN_DEBUG
+ "%d ports detected on Oxford PCI Express device\n",
+ number_uarts);
+ }
+ pci_iounmap(dev, p);
+ return number_uarts;
+}
+
+static int
+pci_default_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset, maxnr;
+
+ bar = FL_GET_BASE(board->flags);
+ if (board->flags & FL_BASE_BARS)
+ bar += idx;
+ else
+ offset += idx * board->uart_offset;
+
+ maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
+ (board->reg_shift + 3);
+
+ if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
+ return 1;
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+static int
+ce4100_serial_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ int ret;
+
+ ret = setup_port(priv, port, 0, 0, board->reg_shift);
+ port->iotype = UPIO_MEM32;
+ port->type = PORT_XSCALE;
+ port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+ port->regshift = 2;
+
+ return ret;
+}
+
+static int
+pci_omegapci_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ return setup_port(priv, port, 2, idx * 8, 0);
+}
+
+static int skip_tx_en_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ port->flags |= UPF_NO_TXEN_TEST;
+ printk(KERN_DEBUG "serial8250: skipping TxEn test for device "
+ "[%04x:%04x] subsystem [%04x:%04x]\n",
+ priv->dev->vendor,
+ priv->dev->device,
+ priv->dev->subsystem_vendor,
+ priv->dev->subsystem_device);
+
+ return pci_default_setup(priv, board, port, idx);
+}
+
+static int kt_serial_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ port->flags |= UPF_IIR_ONCE;
+ return skip_tx_en_setup(priv, board, port, idx);
+}
+
+static int pci_eg20t_init(struct pci_dev *dev)
+{
+#if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE)
+ return -ENODEV;
+#else
+ return 0;
+#endif
+}
+
+static int
+pci_xr17c154_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ port->flags |= UPF_EXAR_EFR;
+ return pci_default_setup(priv, board, port, idx);
+}
+
+static int try_enable_msi(struct pci_dev *dev)
+{
+ /* use msi if available, but fallback to legacy otherwise */
+ pci_enable_msi(dev);
+ return 0;
+}
+
+static void disable_msi(struct pci_dev *dev)
+{
+ pci_disable_msi(dev);
+}
+
+#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
+#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
+#define PCI_DEVICE_ID_OCTPRO 0x0001
+#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108
+#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208
+#define PCI_SUBDEVICE_ID_POCTAL232 0x0308
+#define PCI_SUBDEVICE_ID_POCTAL422 0x0408
+#define PCI_VENDOR_ID_ADVANTECH 0x13fe
+#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
+#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620
+#define PCI_DEVICE_ID_TITAN_200I 0x8028
+#define PCI_DEVICE_ID_TITAN_400I 0x8048
+#define PCI_DEVICE_ID_TITAN_800I 0x8088
+#define PCI_DEVICE_ID_TITAN_800EH 0xA007
+#define PCI_DEVICE_ID_TITAN_800EHB 0xA008
+#define PCI_DEVICE_ID_TITAN_400EH 0xA009
+#define PCI_DEVICE_ID_TITAN_100E 0xA010
+#define PCI_DEVICE_ID_TITAN_200E 0xA012
+#define PCI_DEVICE_ID_TITAN_400E 0xA013
+#define PCI_DEVICE_ID_TITAN_800E 0xA014
+#define PCI_DEVICE_ID_TITAN_200EI 0xA016
+#define PCI_DEVICE_ID_TITAN_200EISI 0xA017
+#define PCI_DEVICE_ID_TITAN_400V3 0xA310
+#define PCI_DEVICE_ID_TITAN_410V3 0xA312
+#define PCI_DEVICE_ID_TITAN_800V3 0xA314
+#define PCI_DEVICE_ID_TITAN_800V3B 0xA315
+#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538
+#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6
+#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001
+#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
+
+/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
+#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
+
+/*
+ * Master list of serial port init/setup/exit quirks.
+ * This does not describe the general nature of the port.
+ * (ie, baud base, number and location of ports, etc)
+ *
+ * This list is ordered alphabetically by vendor then device.
+ * Specific entries must come before more generic entries.
+ */
+static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
+ /*
+ * ADDI-DATA GmbH communication cards <info@addi-data.com>
+ */
+ {
+ .vendor = PCI_VENDOR_ID_ADDIDATA_OLD,
+ .device = PCI_DEVICE_ID_ADDIDATA_APCI7800,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = addidata_apci7800_setup,
+ },
+ /*
+ * AFAVLAB cards - these may be called via parport_serial
+ * It is not clear whether this applies to all products.
+ */
+ {
+ .vendor = PCI_VENDOR_ID_AFAVLAB,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = afavlab_setup,
+ },
+ /*
+ * HP Diva
+ */
+ {
+ .vendor = PCI_VENDOR_ID_HP,
+ .device = PCI_DEVICE_ID_HP_DIVA,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_hp_diva_init,
+ .setup = pci_hp_diva_setup,
+ },
+ /*
+ * Intel
+ */
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_80960_RP,
+ .subvendor = 0xe4bf,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_inteli960ni_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_8257X_SOL,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = skip_tx_en_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82573L_SOL,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = skip_tx_en_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82573E_SOL,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = skip_tx_en_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_CE4100_UART,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = ce4100_serial_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = try_enable_msi,
+ .setup = kt_serial_setup,
+ .exit = disable_msi,
+ },
+ /*
+ * ITE
+ */
+ {
+ .vendor = PCI_VENDOR_ID_ITE,
+ .device = PCI_DEVICE_ID_ITE_8872,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ite887x_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_ite887x_exit),
+ },
+ /*
+ * National Instruments
+ */
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PCI23216,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8420_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_ni8420_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PCI2328,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8420_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_ni8420_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PCI2324,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8420_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_ni8420_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PCI2322,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8420_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_ni8420_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PCI2324I,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8420_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_ni8420_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PCI2322I,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8420_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_ni8420_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PXI8420_23216,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8420_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_ni8420_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PXI8420_2328,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8420_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_ni8420_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PXI8420_2324,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8420_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_ni8420_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PXI8420_2322,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8420_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_ni8420_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PXI8422_2324,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8420_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_ni8420_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_DEVICE_ID_NI_PXI8422_2322,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8420_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_ni8420_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_NI,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_ni8430_init,
+ .setup = pci_ni8430_setup,
+ .exit = __devexit_p(pci_ni8430_exit),
+ },
+ /*
+ * Panacom
+ */
+ {
+ .vendor = PCI_VENDOR_ID_PANACOM,
+ .device = PCI_DEVICE_ID_PANACOM_QUADMODEM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PANACOM,
+ .device = PCI_DEVICE_ID_PANACOM_DUALMODEM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
+ /*
+ * PLX
+ */
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9030,
+ .subvendor = PCI_SUBVENDOR_ID_PERLE,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9050,
+ .subvendor = PCI_SUBVENDOR_ID_EXSYS,
+ .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9050,
+ .subvendor = PCI_SUBVENDOR_ID_KEYSPAN,
+ .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9050,
+ .subvendor = PCI_VENDOR_ID_PLX,
+ .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_ROMULUS,
+ .subvendor = PCI_VENDOR_ID_PLX,
+ .subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
+ /*
+ * SBS Technologies, Inc., PMC-OCTALPRO 232
+ */
+ {
+ .vendor = PCI_VENDOR_ID_SBSMODULARIO,
+ .device = PCI_DEVICE_ID_OCTPRO,
+ .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
+ .subdevice = PCI_SUBDEVICE_ID_OCTPRO232,
+ .init = sbs_init,
+ .setup = sbs_setup,
+ .exit = __devexit_p(sbs_exit),
+ },
+ /*
+ * SBS Technologies, Inc., PMC-OCTALPRO 422
+ */
+ {
+ .vendor = PCI_VENDOR_ID_SBSMODULARIO,
+ .device = PCI_DEVICE_ID_OCTPRO,
+ .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
+ .subdevice = PCI_SUBDEVICE_ID_OCTPRO422,
+ .init = sbs_init,
+ .setup = sbs_setup,
+ .exit = __devexit_p(sbs_exit),
+ },
+ /*
+ * SBS Technologies, Inc., P-Octal 232
+ */
+ {
+ .vendor = PCI_VENDOR_ID_SBSMODULARIO,
+ .device = PCI_DEVICE_ID_OCTPRO,
+ .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
+ .subdevice = PCI_SUBDEVICE_ID_POCTAL232,
+ .init = sbs_init,
+ .setup = sbs_setup,
+ .exit = __devexit_p(sbs_exit),
+ },
+ /*
+ * SBS Technologies, Inc., P-Octal 422
+ */
+ {
+ .vendor = PCI_VENDOR_ID_SBSMODULARIO,
+ .device = PCI_DEVICE_ID_OCTPRO,
+ .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
+ .subdevice = PCI_SUBDEVICE_ID_POCTAL422,
+ .init = sbs_init,
+ .setup = sbs_setup,
+ .exit = __devexit_p(sbs_exit),
+ },
+ /*
+ * SIIG cards - these may be called via parport_serial
+ */
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig_init,
+ .setup = pci_siig_setup,
+ },
+ /*
+ * Titan cards
+ */
+ {
+ .vendor = PCI_VENDOR_ID_TITAN,
+ .device = PCI_DEVICE_ID_TITAN_400L,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = titan_400l_800l_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_TITAN,
+ .device = PCI_DEVICE_ID_TITAN_800L,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = titan_400l_800l_setup,
+ },
+ /*
+ * Timedia cards
+ */
+ {
+ .vendor = PCI_VENDOR_ID_TIMEDIA,
+ .device = PCI_DEVICE_ID_TIMEDIA_1889,
+ .subvendor = PCI_VENDOR_ID_TIMEDIA,
+ .subdevice = PCI_ANY_ID,
+ .probe = pci_timedia_probe,
+ .init = pci_timedia_init,
+ .setup = pci_timedia_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_TIMEDIA,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_timedia_setup,
+ },
+ /*
+ * Exar cards
+ */
+ {
+ .vendor = PCI_VENDOR_ID_EXAR,
+ .device = PCI_DEVICE_ID_EXAR_XR17C152,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17c154_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_EXAR,
+ .device = PCI_DEVICE_ID_EXAR_XR17C154,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17c154_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_EXAR,
+ .device = PCI_DEVICE_ID_EXAR_XR17C158,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17c154_setup,
+ },
+ /*
+ * Xircom cards
+ */
+ {
+ .vendor = PCI_VENDOR_ID_XIRCOM,
+ .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_xircom_init,
+ .setup = pci_default_setup,
+ },
+ /*
+ * Netmos cards - these may be called via parport_serial
+ */
+ {
+ .vendor = PCI_VENDOR_ID_NETMOS,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_netmos_init,
+ .setup = pci_netmos_9900_setup,
+ },
+ /*
+ * For Oxford Semiconductor Tornado based devices
+ */
+ {
+ .vendor = PCI_VENDOR_ID_OXSEMI,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_MAINPINE,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_DIGI,
+ .device = PCIE_DEVICE_ID_NEO_2_OX_IBM,
+ .subvendor = PCI_SUBVENDOR_ID_IBM,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x8811,
+ .init = pci_eg20t_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x8812,
+ .init = pci_eg20t_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x8813,
+ .init = pci_eg20t_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x8814,
+ .init = pci_eg20t_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x8027,
+ .init = pci_eg20t_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x8028,
+ .init = pci_eg20t_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x8029,
+ .init = pci_eg20t_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x800C,
+ .init = pci_eg20t_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x800D,
+ .init = pci_eg20t_init,
+ .setup = pci_default_setup,
+ },
+ /*
+ * Cronyx Omega PCI (PLX-chip based)
+ */
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_CRONYX_OMEGA,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_omegapci_setup,
+ },
+ /*
+ * Default "match everything" terminator entry
+ */
+ {
+ .vendor = PCI_ANY_ID,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_default_setup,
+ }
+};
+
+static inline int quirk_id_matches(u32 quirk_id, u32 dev_id)
+{
+ return quirk_id == PCI_ANY_ID || quirk_id == dev_id;
+}
+
+static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
+{
+ struct pci_serial_quirk *quirk;
+
+ for (quirk = pci_serial_quirks; ; quirk++)
+ if (quirk_id_matches(quirk->vendor, dev->vendor) &&
+ quirk_id_matches(quirk->device, dev->device) &&
+ quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
+ quirk_id_matches(quirk->subdevice, dev->subsystem_device))
+ break;
+ return quirk;
+}
+
+static inline int get_pci_irq(struct pci_dev *dev,
+ const struct pciserial_board *board)
+{
+ if (board->flags & FL_NOIRQ)
+ return 0;
+ else
+ return dev->irq;
+}
+
+/*
+ * This is the configuration table for all of the PCI serial boards
+ * which we support. It is directly indexed by the pci_board_num_t enum
+ * value, which is encoded in the pci_device_id PCI probe table's
+ * driver_data member.
+ *
+ * The makeup of these names are:
+ * pbn_bn{_bt}_n_baud{_offsetinhex}
+ *
+ * bn = PCI BAR number
+ * bt = Index using PCI BARs
+ * n = number of serial ports
+ * baud = baud rate
+ * offsetinhex = offset for each sequential port (in hex)
+ *
+ * This table is sorted by (in order): bn, bt, baud, offsetindex, n.
+ *
+ * Please note: in theory if n = 1, _bt infix should make no difference.
+ * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200
+ */
+enum pci_board_num_t {
+ pbn_default = 0,
+
+ pbn_b0_1_115200,
+ pbn_b0_2_115200,
+ pbn_b0_4_115200,
+ pbn_b0_5_115200,
+ pbn_b0_8_115200,
+
+ pbn_b0_1_921600,
+ pbn_b0_2_921600,
+ pbn_b0_4_921600,
+
+ pbn_b0_2_1130000,
+
+ pbn_b0_4_1152000,
+
+ pbn_b0_2_1843200,
+ pbn_b0_4_1843200,
+
+ pbn_b0_2_1843200_200,
+ pbn_b0_4_1843200_200,
+ pbn_b0_8_1843200_200,
+
+ pbn_b0_1_4000000,
+
+ pbn_b0_bt_1_115200,
+ pbn_b0_bt_2_115200,
+ pbn_b0_bt_4_115200,
+ pbn_b0_bt_8_115200,
+
+ pbn_b0_bt_1_460800,
+ pbn_b0_bt_2_460800,
+ pbn_b0_bt_4_460800,
+
+ pbn_b0_bt_1_921600,
+ pbn_b0_bt_2_921600,
+ pbn_b0_bt_4_921600,
+ pbn_b0_bt_8_921600,
+
+ pbn_b1_1_115200,
+ pbn_b1_2_115200,
+ pbn_b1_4_115200,
+ pbn_b1_8_115200,
+ pbn_b1_16_115200,
+
+ pbn_b1_1_921600,
+ pbn_b1_2_921600,
+ pbn_b1_4_921600,
+ pbn_b1_8_921600,
+
+ pbn_b1_2_1250000,
+
+ pbn_b1_bt_1_115200,
+ pbn_b1_bt_2_115200,
+ pbn_b1_bt_4_115200,
+
+ pbn_b1_bt_2_921600,
+
+ pbn_b1_1_1382400,
+ pbn_b1_2_1382400,
+ pbn_b1_4_1382400,
+ pbn_b1_8_1382400,
+
+ pbn_b2_1_115200,
+ pbn_b2_2_115200,
+ pbn_b2_4_115200,
+ pbn_b2_8_115200,
+
+ pbn_b2_1_460800,
+ pbn_b2_4_460800,
+ pbn_b2_8_460800,
+ pbn_b2_16_460800,
+
+ pbn_b2_1_921600,
+ pbn_b2_4_921600,
+ pbn_b2_8_921600,
+
+ pbn_b2_8_1152000,
+
+ pbn_b2_bt_1_115200,
+ pbn_b2_bt_2_115200,
+ pbn_b2_bt_4_115200,
+
+ pbn_b2_bt_2_921600,
+ pbn_b2_bt_4_921600,
+
+ pbn_b3_2_115200,
+ pbn_b3_4_115200,
+ pbn_b3_8_115200,
+
+ pbn_b4_bt_2_921600,
+ pbn_b4_bt_4_921600,
+ pbn_b4_bt_8_921600,
+
+ /*
+ * Board-specific versions.
+ */
+ pbn_panacom,
+ pbn_panacom2,
+ pbn_panacom4,
+ pbn_exsys_4055,
+ pbn_plx_romulus,
+ pbn_oxsemi,
+ pbn_oxsemi_1_4000000,
+ pbn_oxsemi_2_4000000,
+ pbn_oxsemi_4_4000000,
+ pbn_oxsemi_8_4000000,
+ pbn_intel_i960,
+ pbn_sgi_ioc3,
+ pbn_computone_4,
+ pbn_computone_6,
+ pbn_computone_8,
+ pbn_sbsxrsio,
+ pbn_exar_XR17C152,
+ pbn_exar_XR17C154,
+ pbn_exar_XR17C158,
+ pbn_exar_ibm_saturn,
+ pbn_pasemi_1682M,
+ pbn_ni8430_2,
+ pbn_ni8430_4,
+ pbn_ni8430_8,
+ pbn_ni8430_16,
+ pbn_ADDIDATA_PCIe_1_3906250,
+ pbn_ADDIDATA_PCIe_2_3906250,
+ pbn_ADDIDATA_PCIe_4_3906250,
+ pbn_ADDIDATA_PCIe_8_3906250,
+ pbn_ce4100_1_115200,
+ pbn_omegapci,
+ pbn_NETMOS9900_2s_115200,
+};
+
+/*
+ * uart_offset - the space between channels
+ * reg_shift - describes how the UART registers are mapped
+ * to PCI memory by the card.
+ * For example IER register on SBS, Inc. PMC-OctPro is located at
+ * offset 0x10 from the UART base, while UART_IER is defined as 1
+ * in include/linux/serial_reg.h,
+ * see first lines of serial_in() and serial_out() in 8250.c
+*/
+
+static struct pciserial_board pci_boards[] __devinitdata = {
+ [pbn_default] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_1_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_2_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_4_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_5_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 5,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_8_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_1_921600] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b0_2_921600] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b0_4_921600] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b0_2_1130000] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 1130000,
+ .uart_offset = 8,
+ },
+
+ [pbn_b0_4_1152000] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 1152000,
+ .uart_offset = 8,
+ },
+
+ [pbn_b0_2_1843200] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 1843200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_4_1843200] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 1843200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b0_2_1843200_200] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 1843200,
+ .uart_offset = 0x200,
+ },
+ [pbn_b0_4_1843200_200] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 1843200,
+ .uart_offset = 0x200,
+ },
+ [pbn_b0_8_1843200_200] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 1843200,
+ .uart_offset = 0x200,
+ },
+ [pbn_b0_1_4000000] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 4000000,
+ .uart_offset = 8,
+ },
+
+ [pbn_b0_bt_1_115200] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_2_115200] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_4_115200] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_8_115200] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b0_bt_1_460800] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_2_460800] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_4_460800] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+
+ [pbn_b0_bt_1_921600] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_2_921600] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_4_921600] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_8_921600] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b1_1_115200] = {
+ .flags = FL_BASE1,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b1_2_115200] = {
+ .flags = FL_BASE1,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b1_4_115200] = {
+ .flags = FL_BASE1,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b1_8_115200] = {
+ .flags = FL_BASE1,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b1_16_115200] = {
+ .flags = FL_BASE1,
+ .num_ports = 16,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b1_1_921600] = {
+ .flags = FL_BASE1,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b1_2_921600] = {
+ .flags = FL_BASE1,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b1_4_921600] = {
+ .flags = FL_BASE1,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b1_8_921600] = {
+ .flags = FL_BASE1,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b1_2_1250000] = {
+ .flags = FL_BASE1,
+ .num_ports = 2,
+ .base_baud = 1250000,
+ .uart_offset = 8,
+ },
+
+ [pbn_b1_bt_1_115200] = {
+ .flags = FL_BASE1|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b1_bt_2_115200] = {
+ .flags = FL_BASE1|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b1_bt_4_115200] = {
+ .flags = FL_BASE1|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b1_bt_2_921600] = {
+ .flags = FL_BASE1|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b1_1_1382400] = {
+ .flags = FL_BASE1,
+ .num_ports = 1,
+ .base_baud = 1382400,
+ .uart_offset = 8,
+ },
+ [pbn_b1_2_1382400] = {
+ .flags = FL_BASE1,
+ .num_ports = 2,
+ .base_baud = 1382400,
+ .uart_offset = 8,
+ },
+ [pbn_b1_4_1382400] = {
+ .flags = FL_BASE1,
+ .num_ports = 4,
+ .base_baud = 1382400,
+ .uart_offset = 8,
+ },
+ [pbn_b1_8_1382400] = {
+ .flags = FL_BASE1,
+ .num_ports = 8,
+ .base_baud = 1382400,
+ .uart_offset = 8,
+ },
+
+ [pbn_b2_1_115200] = {
+ .flags = FL_BASE2,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b2_2_115200] = {
+ .flags = FL_BASE2,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b2_4_115200] = {
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b2_8_115200] = {
+ .flags = FL_BASE2,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b2_1_460800] = {
+ .flags = FL_BASE2,
+ .num_ports = 1,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+ [pbn_b2_4_460800] = {
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+ [pbn_b2_8_460800] = {
+ .flags = FL_BASE2,
+ .num_ports = 8,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+ [pbn_b2_16_460800] = {
+ .flags = FL_BASE2,
+ .num_ports = 16,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+
+ [pbn_b2_1_921600] = {
+ .flags = FL_BASE2,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b2_4_921600] = {
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b2_8_921600] = {
+ .flags = FL_BASE2,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b2_8_1152000] = {
+ .flags = FL_BASE2,
+ .num_ports = 8,
+ .base_baud = 1152000,
+ .uart_offset = 8,
+ },
+
+ [pbn_b2_bt_1_115200] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b2_bt_2_115200] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b2_bt_4_115200] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b2_bt_2_921600] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b2_bt_4_921600] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b3_2_115200] = {
+ .flags = FL_BASE3,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b3_4_115200] = {
+ .flags = FL_BASE3,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b3_8_115200] = {
+ .flags = FL_BASE3,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b4_bt_2_921600] = {
+ .flags = FL_BASE4,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b4_bt_4_921600] = {
+ .flags = FL_BASE4,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b4_bt_8_921600] = {
+ .flags = FL_BASE4,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ /*
+ * Entries following this are board-specific.
+ */
+
+ /*
+ * Panacom - IOMEM
+ */
+ [pbn_panacom] = {
+ .flags = FL_BASE2,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 0x400,
+ .reg_shift = 7,
+ },
+ [pbn_panacom2] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 0x400,
+ .reg_shift = 7,
+ },
+ [pbn_panacom4] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 0x400,
+ .reg_shift = 7,
+ },
+
+ [pbn_exsys_4055] = {
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ /* I think this entry is broken - the first_offset looks wrong --rmk */
+ [pbn_plx_romulus] = {
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8 << 2,
+ .reg_shift = 2,
+ .first_offset = 0x03,
+ },
+
+ /*
+ * This board uses the size of PCI Base region 0 to
+ * signal now many ports are available
+ */
+ [pbn_oxsemi] = {
+ .flags = FL_BASE0|FL_REGION_SZ_CAP,
+ .num_ports = 32,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_oxsemi_1_4000000] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 4000000,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_oxsemi_2_4000000] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 4000000,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_oxsemi_4_4000000] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 4000000,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_oxsemi_8_4000000] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 4000000,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+
+
+ /*
+ * EKF addition for i960 Boards form EKF with serial port.
+ * Max 256 ports.
+ */
+ [pbn_intel_i960] = {
+ .flags = FL_BASE0,
+ .num_ports = 32,
+ .base_baud = 921600,
+ .uart_offset = 8 << 2,
+ .reg_shift = 2,
+ .first_offset = 0x10000,
+ },
+ [pbn_sgi_ioc3] = {
+ .flags = FL_BASE0|FL_NOIRQ,
+ .num_ports = 1,
+ .base_baud = 458333,
+ .uart_offset = 8,
+ .reg_shift = 0,
+ .first_offset = 0x20178,
+ },
+
+ /*
+ * Computone - uses IOMEM.
+ */
+ [pbn_computone_4] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 0x40,
+ .reg_shift = 2,
+ .first_offset = 0x200,
+ },
+ [pbn_computone_6] = {
+ .flags = FL_BASE0,
+ .num_ports = 6,
+ .base_baud = 921600,
+ .uart_offset = 0x40,
+ .reg_shift = 2,
+ .first_offset = 0x200,
+ },
+ [pbn_computone_8] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 0x40,
+ .reg_shift = 2,
+ .first_offset = 0x200,
+ },
+ [pbn_sbsxrsio] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 460800,
+ .uart_offset = 256,
+ .reg_shift = 4,
+ },
+ /*
+ * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
+ * Only basic 16550A support.
+ * XR17C15[24] are not tested, but they should work.
+ */
+ [pbn_exar_XR17C152] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 0x200,
+ },
+ [pbn_exar_XR17C154] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 0x200,
+ },
+ [pbn_exar_XR17C158] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 0x200,
+ },
+ [pbn_exar_ibm_saturn] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 0x200,
+ },
+
+ /*
+ * PA Semi PWRficient PA6T-1682M on-chip UART
+ */
+ [pbn_pasemi_1682M] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 8333333,
+ },
+ /*
+ * National Instruments 843x
+ */
+ [pbn_ni8430_16] = {
+ .flags = FL_BASE0,
+ .num_ports = 16,
+ .base_baud = 3686400,
+ .uart_offset = 0x10,
+ .first_offset = 0x800,
+ },
+ [pbn_ni8430_8] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 3686400,
+ .uart_offset = 0x10,
+ .first_offset = 0x800,
+ },
+ [pbn_ni8430_4] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 3686400,
+ .uart_offset = 0x10,
+ .first_offset = 0x800,
+ },
+ [pbn_ni8430_2] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 3686400,
+ .uart_offset = 0x10,
+ .first_offset = 0x800,
+ },
+ /*
+ * ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com>
+ */
+ [pbn_ADDIDATA_PCIe_1_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_ADDIDATA_PCIe_2_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_ADDIDATA_PCIe_4_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_ADDIDATA_PCIe_8_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_ce4100_1_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .reg_shift = 2,
+ },
+ [pbn_omegapci] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 0x200,
+ },
+ [pbn_NETMOS9900_2s_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 115200,
+ },
+};
+
+static const struct pci_device_id softmodem_blacklist[] = {
+ { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
+ { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */
+ { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */
+};
+
+/*
+ * Given a complete unknown PCI device, try to use some heuristics to
+ * guess what the configuration might be, based on the pitiful PCI
+ * serial specs. Returns 0 on success, 1 on failure.
+ */
+static int __devinit
+serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
+{
+ const struct pci_device_id *blacklist;
+ int num_iomem, num_port, first_port = -1, i;
+
+ /*
+ * If it is not a communications device or the programming
+ * interface is greater than 6, give up.
+ *
+ * (Should we try to make guesses for multiport serial devices
+ * later?)
+ */
+ if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
+ ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
+ (dev->class & 0xff) > 6)
+ return -ENODEV;
+
+ /*
+ * Do not access blacklisted devices that are known not to
+ * feature serial ports.
+ */
+ for (blacklist = softmodem_blacklist;
+ blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist);
+ blacklist++) {
+ if (dev->vendor == blacklist->vendor &&
+ dev->device == blacklist->device)
+ return -ENODEV;
+ }
+
+ num_iomem = num_port = 0;
+ for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+ if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
+ num_port++;
+ if (first_port == -1)
+ first_port = i;
+ }
+ if (pci_resource_flags(dev, i) & IORESOURCE_MEM)
+ num_iomem++;
+ }
+
+ /*
+ * If there is 1 or 0 iomem regions, and exactly one port,
+ * use it. We guess the number of ports based on the IO
+ * region size.
+ */
+ if (num_iomem <= 1 && num_port == 1) {
+ board->flags = first_port;
+ board->num_ports = pci_resource_len(dev, first_port) / 8;
+ return 0;
+ }
+
+ /*
+ * Now guess if we've got a board which indexes by BARs.
+ * Each IO BAR should be 8 bytes, and they should follow
+ * consecutively.
+ */
+ first_port = -1;
+ num_port = 0;
+ for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+ if (pci_resource_flags(dev, i) & IORESOURCE_IO &&
+ pci_resource_len(dev, i) == 8 &&
+ (first_port == -1 || (first_port + num_port) == i)) {
+ num_port++;
+ if (first_port == -1)
+ first_port = i;
+ }
+ }
+
+ if (num_port > 1) {
+ board->flags = first_port | FL_BASE_BARS;
+ board->num_ports = num_port;
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+static inline int
+serial_pci_matches(const struct pciserial_board *board,
+ const struct pciserial_board *guessed)
+{
+ return
+ board->num_ports == guessed->num_ports &&
+ board->base_baud == guessed->base_baud &&
+ board->uart_offset == guessed->uart_offset &&
+ board->reg_shift == guessed->reg_shift &&
+ board->first_offset == guessed->first_offset;
+}
+
+struct serial_private *
+pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
+{
+ struct uart_port serial_port;
+ struct serial_private *priv;
+ struct pci_serial_quirk *quirk;
+ int rc, nr_ports, i;
+
+ nr_ports = board->num_ports;
+
+ /*
+ * Find an init and setup quirks.
+ */
+ quirk = find_quirk(dev);
+
+ /*
+ * Run the new-style initialization function.
+ * The initialization function returns:
+ * <0 - error
+ * 0 - use board->num_ports
+ * >0 - number of ports
+ */
+ if (quirk->init) {
+ rc = quirk->init(dev);
+ if (rc < 0) {
+ priv = ERR_PTR(rc);
+ goto err_out;
+ }
+ if (rc)
+ nr_ports = rc;
+ }
+
+ priv = kzalloc(sizeof(struct serial_private) +
+ sizeof(unsigned int) * nr_ports,
+ GFP_KERNEL);
+ if (!priv) {
+ priv = ERR_PTR(-ENOMEM);
+ goto err_deinit;
+ }
+
+ priv->dev = dev;
+ priv->quirk = quirk;
+
+ memset(&serial_port, 0, sizeof(struct uart_port));
+ serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ serial_port.uartclk = board->base_baud * 16;
+ serial_port.irq = get_pci_irq(dev, board);
+ serial_port.dev = &dev->dev;
+
+ for (i = 0; i < nr_ports; i++) {
+ if (quirk->setup(priv, board, &serial_port, i))
+ break;
+
+#ifdef SERIAL_DEBUG_PCI
+ printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n",
+ serial_port.iobase, serial_port.irq, serial_port.iotype);
+#endif
+
+ priv->line[i] = serial8250_register_port(&serial_port);
+ if (priv->line[i] < 0) {
+ printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
+ break;
+ }
+ }
+ priv->nr = i;
+ return priv;
+
+err_deinit:
+ if (quirk->exit)
+ quirk->exit(dev);
+err_out:
+ return priv;
+}
+EXPORT_SYMBOL_GPL(pciserial_init_ports);
+
+void pciserial_remove_ports(struct serial_private *priv)
+{
+ struct pci_serial_quirk *quirk;
+ int i;
+
+ for (i = 0; i < priv->nr; i++)
+ serial8250_unregister_port(priv->line[i]);
+
+ for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+ if (priv->remapped_bar[i])
+ iounmap(priv->remapped_bar[i]);
+ priv->remapped_bar[i] = NULL;
+ }
+
+ /*
+ * Find the exit quirks.
+ */
+ quirk = find_quirk(priv->dev);
+ if (quirk->exit)
+ quirk->exit(priv->dev);
+
+ kfree(priv);
+}
+EXPORT_SYMBOL_GPL(pciserial_remove_ports);
+
+void pciserial_suspend_ports(struct serial_private *priv)
+{
+ int i;
+
+ for (i = 0; i < priv->nr; i++)
+ if (priv->line[i] >= 0)
+ serial8250_suspend_port(priv->line[i]);
+}
+EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
+
+void pciserial_resume_ports(struct serial_private *priv)
+{
+ int i;
+
+ /*
+ * Ensure that the board is correctly configured.
+ */
+ if (priv->quirk->init)
+ priv->quirk->init(priv->dev);
+
+ for (i = 0; i < priv->nr; i++)
+ if (priv->line[i] >= 0)
+ serial8250_resume_port(priv->line[i]);
+}
+EXPORT_SYMBOL_GPL(pciserial_resume_ports);
+
+/*
+ * Probe one serial board. Unfortunately, there is no rhyme nor reason
+ * to the arrangement of serial ports on a PCI card.
+ */
+static int __devinit
+pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+ struct pci_serial_quirk *quirk;
+ struct serial_private *priv;
+ const struct pciserial_board *board;
+ struct pciserial_board tmp;
+ int rc;
+
+ quirk = find_quirk(dev);
+ if (quirk->probe) {
+ rc = quirk->probe(dev);
+ if (rc)
+ return rc;
+ }
+
+ if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
+ printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
+ ent->driver_data);
+ return -EINVAL;
+ }
+
+ board = &pci_boards[ent->driver_data];
+
+ rc = pci_enable_device(dev);
+ pci_save_state(dev);
+ if (rc)
+ return rc;
+
+ if (ent->driver_data == pbn_default) {
+ /*
+ * Use a copy of the pci_board entry for this;
+ * avoid changing entries in the table.
+ */
+ memcpy(&tmp, board, sizeof(struct pciserial_board));
+ board = &tmp;
+
+ /*
+ * We matched one of our class entries. Try to
+ * determine the parameters of this board.
+ */
+ rc = serial_pci_guess_board(dev, &tmp);
+ if (rc)
+ goto disable;
+ } else {
+ /*
+ * We matched an explicit entry. If we are able to
+ * detect this boards settings with our heuristic,
+ * then we no longer need this entry.
+ */
+ memcpy(&tmp, &pci_boards[pbn_default],
+ sizeof(struct pciserial_board));
+ rc = serial_pci_guess_board(dev, &tmp);
+ if (rc == 0 && serial_pci_matches(board, &tmp))
+ moan_device("Redundant entry in serial pci_table.",
+ dev);
+ }
+
+ priv = pciserial_init_ports(dev, board);
+ if (!IS_ERR(priv)) {
+ pci_set_drvdata(dev, priv);
+ return 0;
+ }
+
+ rc = PTR_ERR(priv);
+
+ disable:
+ pci_disable_device(dev);
+ return rc;
+}
+
+static void __devexit pciserial_remove_one(struct pci_dev *dev)
+{
+ struct serial_private *priv = pci_get_drvdata(dev);
+
+ pci_set_drvdata(dev, NULL);
+
+ pciserial_remove_ports(priv);
+
+ pci_disable_device(dev);
+}
+
+#ifdef CONFIG_PM
+static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
+{
+ struct serial_private *priv = pci_get_drvdata(dev);
+
+ if (priv)
+ pciserial_suspend_ports(priv);
+
+ pci_save_state(dev);
+ pci_set_power_state(dev, pci_choose_state(dev, state));
+ return 0;
+}
+
+static int pciserial_resume_one(struct pci_dev *dev)
+{
+ int err;
+ struct serial_private *priv = pci_get_drvdata(dev);
+
+ pci_set_power_state(dev, PCI_D0);
+ pci_restore_state(dev);
+
+ if (priv) {
+ /*
+ * The device may have been disabled. Re-enable it.
+ */
+ err = pci_enable_device(dev);
+ /* FIXME: We cannot simply error out here */
+ if (err)
+ printk(KERN_ERR "pciserial: Unable to re-enable ports, trying to continue.\n");
+ pciserial_resume_ports(priv);
+ }
+ return 0;
+}
+#endif
+
+static struct pci_device_id serial_pci_tbl[] = {
+ /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */
+ { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
+ PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0,
+ pbn_b2_8_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
+ pbn_b1_8_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
+ pbn_b1_4_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
+ pbn_b1_2_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
+ pbn_b1_8_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
+ pbn_b1_4_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
+ pbn_b1_2_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0,
+ pbn_b1_8_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0,
+ pbn_b1_8_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0,
+ pbn_b1_4_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0,
+ pbn_b1_4_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0,
+ pbn_b1_2_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0,
+ pbn_b1_8_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0,
+ pbn_b1_8_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0,
+ pbn_b1_4_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0,
+ pbn_b1_2_1250000 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0,
+ pbn_b0_2_1843200 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0,
+ pbn_b0_4_1843200 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+ PCI_VENDOR_ID_AFAVLAB,
+ PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0,
+ pbn_b0_4_1152000 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0,
+ pbn_b0_2_1843200_200 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232, 0, 0,
+ pbn_b0_4_1843200_200 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232, 0, 0,
+ pbn_b0_8_1843200_200 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1, 0, 0,
+ pbn_b0_2_1843200_200 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2, 0, 0,
+ pbn_b0_4_1843200_200 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4, 0, 0,
+ pbn_b0_8_1843200_200 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2, 0, 0,
+ pbn_b0_2_1843200_200 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4, 0, 0,
+ pbn_b0_4_1843200_200 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8, 0, 0,
+ pbn_b0_8_1843200_200 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485, 0, 0,
+ pbn_b0_2_1843200_200 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485, 0, 0,
+ pbn_b0_4_1843200_200 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0,
+ pbn_b0_8_1843200_200 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
+ PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT,
+ 0, 0, pbn_exar_ibm_saturn },
+
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_1_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_4_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_4_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_8_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_8_460800 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_8_115200 },
+
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_115200 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_921600 },
+ /*
+ * VScom SPCOM800, from sl@s.pl
+ */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_8_921600 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_4_921600 },
+ /* Unknown card - subdevice 0x1584 */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_VENDOR_ID_PLX,
+ PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
+ pbn_b0_4_115200 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_KEYSPAN,
+ PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
+ pbn_panacom },
+ { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_panacom4 },
+ { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_panacom2 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+ PCI_VENDOR_ID_ESDGMBH,
+ PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0,
+ pbn_b2_4_115200 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
+ PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
+ pbn_b2_4_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
+ PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
+ pbn_b2_8_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
+ PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
+ pbn_b2_16_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
+ PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
+ pbn_b2_16_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIRAS,
+ PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
+ pbn_b2_4_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIRAS,
+ PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
+ pbn_b2_8_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_EXSYS,
+ PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
+ pbn_exsys_4055 },
+ /*
+ * Megawolf Romulus PCI Serial Card, from Mike Hudson
+ * (Exoray@isys.ca)
+ */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
+ 0x10b5, 0x106a, 0, 0,
+ pbn_plx_romulus },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_4_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_8_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_8_115200 },
+ { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
+ PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4,
+ 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+ PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
+ 0, 0,
+ pbn_b0_4_1152000 },
+ { PCI_VENDOR_ID_OXSEMI, 0x9505,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
+
+ /*
+ * The below card is a little controversial since it is the
+ * subject of a PCI vendor/device ID clash. (See
+ * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
+ * For now just used the hex ID 0x950a.
+ */
+ { PCI_VENDOR_ID_OXSEMI, 0x950a,
+ PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL, 0, 0,
+ pbn_b0_2_115200 },
+ { PCI_VENDOR_ID_OXSEMI, 0x950a,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_2_1130000 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950,
+ PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0,
+ pbn_b0_1_921600 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_115200 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
+ PCI_ANY_ID , PCI_ANY_ID, 0, 0,
+ pbn_b2_8_1152000 },
+
+ /*
+ * Oxford Semiconductor Inc. Tornado PCI express device range.
+ */
+ { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_2_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_2_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_4_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_4_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_8_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_8_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ /*
+ * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado
+ */
+ { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */
+ PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */
+ PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0,
+ pbn_oxsemi_2_4000000 },
+ { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */
+ PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0,
+ pbn_oxsemi_4_4000000 },
+ { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */
+ PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0,
+ pbn_oxsemi_8_4000000 },
+
+ /*
+ * Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado
+ */
+ { PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM,
+ PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_2_4000000 },
+
+ /*
+ * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
+ * from skokodyn@yahoo.com
+ */
+ { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+ PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0,
+ pbn_sbsxrsio },
+ { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+ PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0,
+ pbn_sbsxrsio },
+ { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+ PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0,
+ pbn_sbsxrsio },
+ { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+ PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0,
+ pbn_sbsxrsio },
+
+ /*
+ * Digitan DS560-558, from jimd@esoft.com
+ */
+ { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_1_115200 },
+
+ /*
+ * Titan Electronic cards
+ * The 400L and 800L have a custom setup quirk.
+ */
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_2_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_1_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_bt_2_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_8_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b4_bt_2_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b4_bt_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b4_bt_8_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_2_4000000 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_4_4000000 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_8_4000000 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_2_4000000 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_2_4000000 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_410V3,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_1_460800 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_1_460800 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_1_460800 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_8_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_8_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_8_921600 },
+
+ /*
+ * Computone devices submitted by Doug McNash dmcnash@computone.com
+ */
+ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
+ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
+ 0, 0, pbn_computone_4 },
+ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
+ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
+ 0, 0, pbn_computone_8 },
+ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
+ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
+ 0, 0, pbn_computone_6 },
+
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi },
+ { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
+ PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_1_921600 },
+
+ /*
+ * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org>
+ */
+ { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_8_115200 },
+ { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_8_115200 },
+
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_460800 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_460800 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_460800 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_460800 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_460800 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_1_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_1_460800 },
+
+ /*
+ * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408).
+ * Cards are identified by their subsystem vendor IDs, which
+ * (in hex) match the model number.
+ *
+ * Note that JC140x are RS422/485 cards which require ox950
+ * ACR = 0x10, and as such are not currently fully supported.
+ */
+ { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
+ 0x1204, 0x0004, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
+ 0x1208, 0x0004, 0, 0,
+ pbn_b0_4_921600 },
+/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
+ 0x1402, 0x0002, 0, 0,
+ pbn_b0_2_921600 }, */
+/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
+ 0x1404, 0x0004, 0, 0,
+ pbn_b0_4_921600 }, */
+ { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1,
+ 0x1208, 0x0004, 0, 0,
+ pbn_b0_4_921600 },
+
+ { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2,
+ 0x1204, 0x0004, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2,
+ 0x1208, 0x0004, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3,
+ 0x1208, 0x0004, 0, 0,
+ pbn_b0_4_921600 },
+ /*
+ * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com
+ */
+ { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_1_1382400 },
+
+ /*
+ * Dell Remote Access Card III - Tim_T_Murphy@Dell.com
+ */
+ { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_1_1382400 },
+
+ /*
+ * RAStel 2 port modem, gerg@moreton.com.au
+ */
+ { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_115200 },
+
+ /*
+ * EKF addition for i960 Boards form EKF with serial port
+ */
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP,
+ 0xE4BF, PCI_ANY_ID, 0, 0,
+ pbn_intel_i960 },
+
+ /*
+ * Xircom Cardbus/Ethernet combos
+ */
+ { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_115200 },
+ /*
+ * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry)
+ */
+ { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_115200 },
+
+ /*
+ * Untested PCI modems, sent in from various folks...
+ */
+
+ /*
+ * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de>
+ */
+ { PCI_VENDOR_ID_ROCKWELL, 0x1004,
+ 0x1048, 0x1500, 0, 0,
+ pbn_b1_1_115200 },
+
+ { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
+ 0xFF00, 0, 0, 0,
+ pbn_sgi_ioc3 },
+
+ /*
+ * HP Diva card
+ */
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
+ PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0,
+ pbn_b1_1_115200 },
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_5_115200 },
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_1_115200 },
+
+ { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b3_2_115200 },
+ { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b3_4_115200 },
+ { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b3_8_115200 },
+
+ /*
+ * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
+ */
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17C152 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17C154 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17C158 },
+
+ /*
+ * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
+ */
+ { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_115200 },
+ /*
+ * ITE
+ */
+ { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b1_bt_1_115200 },
+
+ /*
+ * IntaShield IS-200
+ */
+ { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */
+ pbn_b2_2_115200 },
+ /*
+ * IntaShield IS-400
+ */
+ { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */
+ pbn_b2_4_115200 },
+ /*
+ * Perle PCI-RAS cards
+ */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+ PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4,
+ 0, 0, pbn_b2_4_921600 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+ PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8,
+ 0, 0, pbn_b2_8_921600 },
+
+ /*
+ * Mainpine series cards: Fairly standard layout but fools
+ * parts of the autodetect in some cases and uses otherwise
+ * unmatched communications subclasses in the PCI Express case
+ */
+
+ { /* RockForceDUO */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x0200,
+ 0, 0, pbn_b0_2_115200 },
+ { /* RockForceQUATRO */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x0300,
+ 0, 0, pbn_b0_4_115200 },
+ { /* RockForceDUO+ */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x0400,
+ 0, 0, pbn_b0_2_115200 },
+ { /* RockForceQUATRO+ */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x0500,
+ 0, 0, pbn_b0_4_115200 },
+ { /* RockForce+ */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x0600,
+ 0, 0, pbn_b0_2_115200 },
+ { /* RockForce+ */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x0700,
+ 0, 0, pbn_b0_4_115200 },
+ { /* RockForceOCTO+ */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x0800,
+ 0, 0, pbn_b0_8_115200 },
+ { /* RockForceDUO+ */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x0C00,
+ 0, 0, pbn_b0_2_115200 },
+ { /* RockForceQUARTRO+ */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x0D00,
+ 0, 0, pbn_b0_4_115200 },
+ { /* RockForceOCTO+ */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x1D00,
+ 0, 0, pbn_b0_8_115200 },
+ { /* RockForceD1 */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x2000,
+ 0, 0, pbn_b0_1_115200 },
+ { /* RockForceF1 */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x2100,
+ 0, 0, pbn_b0_1_115200 },
+ { /* RockForceD2 */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x2200,
+ 0, 0, pbn_b0_2_115200 },
+ { /* RockForceF2 */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x2300,
+ 0, 0, pbn_b0_2_115200 },
+ { /* RockForceD4 */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x2400,
+ 0, 0, pbn_b0_4_115200 },
+ { /* RockForceF4 */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x2500,
+ 0, 0, pbn_b0_4_115200 },
+ { /* RockForceD8 */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x2600,
+ 0, 0, pbn_b0_8_115200 },
+ { /* RockForceF8 */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x2700,
+ 0, 0, pbn_b0_8_115200 },
+ { /* IQ Express D1 */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x3000,
+ 0, 0, pbn_b0_1_115200 },
+ { /* IQ Express F1 */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x3100,
+ 0, 0, pbn_b0_1_115200 },
+ { /* IQ Express D2 */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x3200,
+ 0, 0, pbn_b0_2_115200 },
+ { /* IQ Express F2 */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x3300,
+ 0, 0, pbn_b0_2_115200 },
+ { /* IQ Express D4 */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x3400,
+ 0, 0, pbn_b0_4_115200 },
+ { /* IQ Express F4 */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x3500,
+ 0, 0, pbn_b0_4_115200 },
+ { /* IQ Express D8 */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x3C00,
+ 0, 0, pbn_b0_8_115200 },
+ { /* IQ Express F8 */
+ PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+ PCI_VENDOR_ID_MAINPINE, 0x3D00,
+ 0, 0, pbn_b0_8_115200 },
+
+
+ /*
+ * PA Semi PA6T-1682M on-chip UART
+ */
+ { PCI_VENDOR_ID_PASEMI, 0xa004,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pasemi_1682M },
+
+ /*
+ * National Instruments
+ */
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_16_115200 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_8_115200 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_bt_4_115200 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_bt_2_115200 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_bt_4_115200 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_bt_2_115200 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_16_115200 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_8_115200 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_bt_4_115200 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_bt_2_115200 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_bt_4_115200 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_bt_2_115200 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8430_2 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8430_2 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8430_4 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8430_4 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8430_8 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8430_8 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8430_16 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8430_16 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8430_2 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8430_2 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8430_4 },
+ { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ni8430_4 },
+
+ /*
+ * ADDI-DATA GmbH communication cards <info@addi-data.com>
+ */
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7500,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_4_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7420,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_2_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7300,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA_OLD,
+ PCI_DEVICE_ID_ADDIDATA_APCI7800,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b1_8_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7500_2,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_4_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7420_2,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_2_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7300_2,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7500_3,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_4_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7420_3,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_2_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7300_3,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7800_3,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_8_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCIe7500,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_ADDIDATA_PCIe_4_3906250 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCIe7420,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_ADDIDATA_PCIe_2_3906250 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCIe7300,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_ADDIDATA_PCIe_1_3906250 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCIe7800,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_ADDIDATA_PCIe_8_3906250 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+ PCI_VENDOR_ID_IBM, 0x0299,
+ 0, 0, pbn_b0_bt_2_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
+ /* the 9901 is a rebranded 9912 */
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+ 0xA000, 0x3002,
+ 0, 0, pbn_NETMOS9900_2s_115200 },
+
+ /*
+ * Best Connectivity and Rosewill PCI Multi I/O cards
+ */
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+ 0xA000, 0x3002,
+ 0, 0, pbn_b0_bt_2_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+ 0xA000, 0x3004,
+ 0, 0, pbn_b0_bt_4_115200 },
+ /* Intel CE4100 */
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ce4100_1_115200 },
+
+ /*
+ * Cronyx Omega PCI
+ */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_omegapci },
+
+ /*
+ * These entries match devices with class COMMUNICATION_SERIAL,
+ * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
+ */
+ { PCI_ANY_ID, PCI_ANY_ID,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_SERIAL << 8,
+ 0xffff00, pbn_default },
+ { PCI_ANY_ID, PCI_ANY_ID,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_MODEM << 8,
+ 0xffff00, pbn_default },
+ { PCI_ANY_ID, PCI_ANY_ID,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_MULTISERIAL << 8,
+ 0xffff00, pbn_default },
+ { 0, }
+};
+
+static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev,
+ pci_channel_state_t state)
+{
+ struct serial_private *priv = pci_get_drvdata(dev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (priv)
+ pciserial_suspend_ports(priv);
+
+ pci_disable_device(dev);
+
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev)
+{
+ int rc;
+
+ rc = pci_enable_device(dev);
+
+ if (rc)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ pci_restore_state(dev);
+ pci_save_state(dev);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void serial8250_io_resume(struct pci_dev *dev)
+{
+ struct serial_private *priv = pci_get_drvdata(dev);
+
+ if (priv)
+ pciserial_resume_ports(priv);
+}
+
+static struct pci_error_handlers serial8250_err_handler = {
+ .error_detected = serial8250_io_error_detected,
+ .slot_reset = serial8250_io_slot_reset,
+ .resume = serial8250_io_resume,
+};
+
+static struct pci_driver serial_pci_driver = {
+ .name = "serial",
+ .probe = pciserial_init_one,
+ .remove = __devexit_p(pciserial_remove_one),
+#ifdef CONFIG_PM
+ .suspend = pciserial_suspend_one,
+ .resume = pciserial_resume_one,
+#endif
+ .id_table = serial_pci_tbl,
+ .err_handler = &serial8250_err_handler,
+};
+
+static int __init serial8250_pci_init(void)
+{
+ return pci_register_driver(&serial_pci_driver);
+}
+
+static void __exit serial8250_pci_exit(void)
+{
+ pci_unregister_driver(&serial_pci_driver);
+}
+
+module_init(serial8250_pci_init);
+module_exit(serial8250_pci_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
+MODULE_DEVICE_TABLE(pci, serial_pci_tbl);
--- /dev/null
+/*
+ * Probe module for 8250/16550-type ISAPNP serial ports.
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
+ *
+ * Ported to the Linux PnP Layer - (C) Adam Belay.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pnp.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/serial_core.h>
+#include <linux/bitops.h>
+
+#include <asm/byteorder.h>
+
+#include "8250.h"
+
+#define UNKNOWN_DEV 0x3000
+
+
+static const struct pnp_device_id pnp_dev_table[] = {
+ /* Archtek America Corp. */
+ /* Archtek SmartLink Modem 3334BT Plug & Play */
+ { "AAC000F", 0 },
+ /* Anchor Datacomm BV */
+ /* SXPro 144 External Data Fax Modem Plug & Play */
+ { "ADC0001", 0 },
+ /* SXPro 288 External Data Fax Modem Plug & Play */
+ { "ADC0002", 0 },
+ /* PROLiNK 1456VH ISA PnP K56flex Fax Modem */
+ { "AEI0250", 0 },
+ /* Actiontec ISA PNP 56K X2 Fax Modem */
+ { "AEI1240", 0 },
+ /* Rockwell 56K ACF II Fax+Data+Voice Modem */
+ { "AKY1021", 0 /*SPCI_FL_NO_SHIRQ*/ },
+ /* AZT3005 PnP SOUND DEVICE */
+ { "AZT4001", 0 },
+ /* Best Data Products Inc. Smart One 336F PnP Modem */
+ { "BDP3336", 0 },
+ /* Boca Research */
+ /* Boca Complete Ofc Communicator 14.4 Data-FAX */
+ { "BRI0A49", 0 },
+ /* Boca Research 33,600 ACF Modem */
+ { "BRI1400", 0 },
+ /* Boca 33.6 Kbps Internal FD34FSVD */
+ { "BRI3400", 0 },
+ /* Boca 33.6 Kbps Internal FD34FSVD */
+ { "BRI0A49", 0 },
+ /* Best Data Products Inc. Smart One 336F PnP Modem */
+ { "BDP3336", 0 },
+ /* Computer Peripherals Inc */
+ /* EuroViVa CommCenter-33.6 SP PnP */
+ { "CPI4050", 0 },
+ /* Creative Labs */
+ /* Creative Labs Phone Blaster 28.8 DSVD PnP Voice */
+ { "CTL3001", 0 },
+ /* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */
+ { "CTL3011", 0 },
+ /* Davicom ISA 33.6K Modem */
+ { "DAV0336", 0 },
+ /* Creative */
+ /* Creative Modem Blaster Flash56 DI5601-1 */
+ { "DMB1032", 0 },
+ /* Creative Modem Blaster V.90 DI5660 */
+ { "DMB2001", 0 },
+ /* E-Tech */
+ /* E-Tech CyberBULLET PC56RVP */
+ { "ETT0002", 0 },
+ /* FUJITSU */
+ /* Fujitsu 33600 PnP-I2 R Plug & Play */
+ { "FUJ0202", 0 },
+ /* Fujitsu FMV-FX431 Plug & Play */
+ { "FUJ0205", 0 },
+ /* Fujitsu 33600 PnP-I4 R Plug & Play */
+ { "FUJ0206", 0 },
+ /* Fujitsu Fax Voice 33600 PNP-I5 R Plug & Play */
+ { "FUJ0209", 0 },
+ /* Archtek America Corp. */
+ /* Archtek SmartLink Modem 3334BT Plug & Play */
+ { "GVC000F", 0 },
+ /* Archtek SmartLink Modem 3334BRV 33.6K Data Fax Voice */
+ { "GVC0303", 0 },
+ /* Hayes */
+ /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */
+ { "HAY0001", 0 },
+ /* Hayes Optima 336 V.34 + FAX + Voice PnP */
+ { "HAY000C", 0 },
+ /* Hayes Optima 336B V.34 + FAX + Voice PnP */
+ { "HAY000D", 0 },
+ /* Hayes Accura 56K Ext Fax Modem PnP */
+ { "HAY5670", 0 },
+ /* Hayes Accura 56K Ext Fax Modem PnP */
+ { "HAY5674", 0 },
+ /* Hayes Accura 56K Fax Modem PnP */
+ { "HAY5675", 0 },
+ /* Hayes 288, V.34 + FAX */
+ { "HAYF000", 0 },
+ /* Hayes Optima 288 V.34 + FAX + Voice, Plug & Play */
+ { "HAYF001", 0 },
+ /* IBM */
+ /* IBM Thinkpad 701 Internal Modem Voice */
+ { "IBM0033", 0 },
+ /* Intermec */
+ /* Intermec CV60 touchscreen port */
+ { "PNP4972", 0 },
+ /* Intertex */
+ /* Intertex 28k8 33k6 Voice EXT PnP */
+ { "IXDC801", 0 },
+ /* Intertex 33k6 56k Voice EXT PnP */
+ { "IXDC901", 0 },
+ /* Intertex 28k8 33k6 Voice SP EXT PnP */
+ { "IXDD801", 0 },
+ /* Intertex 33k6 56k Voice SP EXT PnP */
+ { "IXDD901", 0 },
+ /* Intertex 28k8 33k6 Voice SP INT PnP */
+ { "IXDF401", 0 },
+ /* Intertex 28k8 33k6 Voice SP EXT PnP */
+ { "IXDF801", 0 },
+ /* Intertex 33k6 56k Voice SP EXT PnP */
+ { "IXDF901", 0 },
+ /* Kortex International */
+ /* KORTEX 28800 Externe PnP */
+ { "KOR4522", 0 },
+ /* KXPro 33.6 Vocal ASVD PnP */
+ { "KORF661", 0 },
+ /* Lasat */
+ /* LASAT Internet 33600 PnP */
+ { "LAS4040", 0 },
+ /* Lasat Safire 560 PnP */
+ { "LAS4540", 0 },
+ /* Lasat Safire 336 PnP */
+ { "LAS5440", 0 },
+ /* Microcom, Inc. */
+ /* Microcom TravelPorte FAST V.34 Plug & Play */
+ { "MNP0281", 0 },
+ /* Microcom DeskPorte V.34 FAST or FAST+ Plug & Play */
+ { "MNP0336", 0 },
+ /* Microcom DeskPorte FAST EP 28.8 Plug & Play */
+ { "MNP0339", 0 },
+ /* Microcom DeskPorte 28.8P Plug & Play */
+ { "MNP0342", 0 },
+ /* Microcom DeskPorte FAST ES 28.8 Plug & Play */
+ { "MNP0500", 0 },
+ /* Microcom DeskPorte FAST ES 28.8 Plug & Play */
+ { "MNP0501", 0 },
+ /* Microcom DeskPorte 28.8S Internal Plug & Play */
+ { "MNP0502", 0 },
+ /* Motorola */
+ /* Motorola BitSURFR Plug & Play */
+ { "MOT1105", 0 },
+ /* Motorola TA210 Plug & Play */
+ { "MOT1111", 0 },
+ /* Motorola HMTA 200 (ISDN) Plug & Play */
+ { "MOT1114", 0 },
+ /* Motorola BitSURFR Plug & Play */
+ { "MOT1115", 0 },
+ /* Motorola Lifestyle 28.8 Internal */
+ { "MOT1190", 0 },
+ /* Motorola V.3400 Plug & Play */
+ { "MOT1501", 0 },
+ /* Motorola Lifestyle 28.8 V.34 Plug & Play */
+ { "MOT1502", 0 },
+ /* Motorola Power 28.8 V.34 Plug & Play */
+ { "MOT1505", 0 },
+ /* Motorola ModemSURFR External 28.8 Plug & Play */
+ { "MOT1509", 0 },
+ /* Motorola Premier 33.6 Desktop Plug & Play */
+ { "MOT150A", 0 },
+ /* Motorola VoiceSURFR 56K External PnP */
+ { "MOT150F", 0 },
+ /* Motorola ModemSURFR 56K External PnP */
+ { "MOT1510", 0 },
+ /* Motorola ModemSURFR 56K Internal PnP */
+ { "MOT1550", 0 },
+ /* Motorola ModemSURFR Internal 28.8 Plug & Play */
+ { "MOT1560", 0 },
+ /* Motorola Premier 33.6 Internal Plug & Play */
+ { "MOT1580", 0 },
+ /* Motorola OnlineSURFR 28.8 Internal Plug & Play */
+ { "MOT15B0", 0 },
+ /* Motorola VoiceSURFR 56K Internal PnP */
+ { "MOT15F0", 0 },
+ /* Com 1 */
+ /* Deskline K56 Phone System PnP */
+ { "MVX00A1", 0 },
+ /* PC Rider K56 Phone System PnP */
+ { "MVX00F2", 0 },
+ /* NEC 98NOTE SPEAKER PHONE FAX MODEM(33600bps) */
+ { "nEC8241", 0 },
+ /* Pace 56 Voice Internal Plug & Play Modem */
+ { "PMC2430", 0 },
+ /* Generic */
+ /* Generic standard PC COM port */
+ { "PNP0500", 0 },
+ /* Generic 16550A-compatible COM port */
+ { "PNP0501", 0 },
+ /* Compaq 14400 Modem */
+ { "PNPC000", 0 },
+ /* Compaq 2400/9600 Modem */
+ { "PNPC001", 0 },
+ /* Dial-Up Networking Serial Cable between 2 PCs */
+ { "PNPC031", 0 },
+ /* Dial-Up Networking Parallel Cable between 2 PCs */
+ { "PNPC032", 0 },
+ /* Standard 9600 bps Modem */
+ { "PNPC100", 0 },
+ /* Standard 14400 bps Modem */
+ { "PNPC101", 0 },
+ /* Standard 28800 bps Modem*/
+ { "PNPC102", 0 },
+ /* Standard Modem*/
+ { "PNPC103", 0 },
+ /* Standard 9600 bps Modem*/
+ { "PNPC104", 0 },
+ /* Standard 14400 bps Modem*/
+ { "PNPC105", 0 },
+ /* Standard 28800 bps Modem*/
+ { "PNPC106", 0 },
+ /* Standard Modem */
+ { "PNPC107", 0 },
+ /* Standard 9600 bps Modem */
+ { "PNPC108", 0 },
+ /* Standard 14400 bps Modem */
+ { "PNPC109", 0 },
+ /* Standard 28800 bps Modem */
+ { "PNPC10A", 0 },
+ /* Standard Modem */
+ { "PNPC10B", 0 },
+ /* Standard 9600 bps Modem */
+ { "PNPC10C", 0 },
+ /* Standard 14400 bps Modem */
+ { "PNPC10D", 0 },
+ /* Standard 28800 bps Modem */
+ { "PNPC10E", 0 },
+ /* Standard Modem */
+ { "PNPC10F", 0 },
+ /* Standard PCMCIA Card Modem */
+ { "PNP2000", 0 },
+ /* Rockwell */
+ /* Modular Technology */
+ /* Rockwell 33.6 DPF Internal PnP */
+ /* Modular Technology 33.6 Internal PnP */
+ { "ROK0030", 0 },
+ /* Kortex International */
+ /* KORTEX 14400 Externe PnP */
+ { "ROK0100", 0 },
+ /* Rockwell 28.8 */
+ { "ROK4120", 0 },
+ /* Viking Components, Inc */
+ /* Viking 28.8 INTERNAL Fax+Data+Voice PnP */
+ { "ROK4920", 0 },
+ /* Rockwell */
+ /* British Telecom */
+ /* Modular Technology */
+ /* Rockwell 33.6 DPF External PnP */
+ /* BT Prologue 33.6 External PnP */
+ /* Modular Technology 33.6 External PnP */
+ { "RSS00A0", 0 },
+ /* Viking 56K FAX INT */
+ { "RSS0262", 0 },
+ /* K56 par,VV,Voice,Speakphone,AudioSpan,PnP */
+ { "RSS0250", 0 },
+ /* SupraExpress 28.8 Data/Fax PnP modem */
+ { "SUP1310", 0 },
+ /* SupraExpress 336i PnP Voice Modem */
+ { "SUP1381", 0 },
+ /* SupraExpress 33.6 Data/Fax PnP modem */
+ { "SUP1421", 0 },
+ /* SupraExpress 33.6 Data/Fax PnP modem */
+ { "SUP1590", 0 },
+ /* SupraExpress 336i Sp ASVD */
+ { "SUP1620", 0 },
+ /* SupraExpress 33.6 Data/Fax PnP modem */
+ { "SUP1760", 0 },
+ /* SupraExpress 56i Sp Intl */
+ { "SUP2171", 0 },
+ /* Phoebe Micro */
+ /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */
+ { "TEX0011", 0 },
+ /* Archtek America Corp. */
+ /* Archtek SmartLink Modem 3334BT Plug & Play */
+ { "UAC000F", 0 },
+ /* 3Com Corp. */
+ /* Gateway Telepath IIvi 33.6 */
+ { "USR0000", 0 },
+ /* U.S. Robotics Sporster 33.6K Fax INT PnP */
+ { "USR0002", 0 },
+ /* Sportster Vi 14.4 PnP FAX Voicemail */
+ { "USR0004", 0 },
+ /* U.S. Robotics 33.6K Voice INT PnP */
+ { "USR0006", 0 },
+ /* U.S. Robotics 33.6K Voice EXT PnP */
+ { "USR0007", 0 },
+ /* U.S. Robotics Courier V.Everything INT PnP */
+ { "USR0009", 0 },
+ /* U.S. Robotics 33.6K Voice INT PnP */
+ { "USR2002", 0 },
+ /* U.S. Robotics 56K Voice INT PnP */
+ { "USR2070", 0 },
+ /* U.S. Robotics 56K Voice EXT PnP */
+ { "USR2080", 0 },
+ /* U.S. Robotics 56K FAX INT */
+ { "USR3031", 0 },
+ /* U.S. Robotics 56K FAX INT */
+ { "USR3050", 0 },
+ /* U.S. Robotics 56K Voice INT PnP */
+ { "USR3070", 0 },
+ /* U.S. Robotics 56K Voice EXT PnP */
+ { "USR3080", 0 },
+ /* U.S. Robotics 56K Voice INT PnP */
+ { "USR3090", 0 },
+ /* U.S. Robotics 56K Message */
+ { "USR9100", 0 },
+ /* U.S. Robotics 56K FAX EXT PnP*/
+ { "USR9160", 0 },
+ /* U.S. Robotics 56K FAX INT PnP*/
+ { "USR9170", 0 },
+ /* U.S. Robotics 56K Voice EXT PnP*/
+ { "USR9180", 0 },
+ /* U.S. Robotics 56K Voice INT PnP*/
+ { "USR9190", 0 },
+ /* Wacom tablets */
+ { "WACFXXX", 0 },
+ /* Compaq touchscreen */
+ { "FPI2002", 0 },
+ /* Fujitsu Stylistic touchscreens */
+ { "FUJ02B2", 0 },
+ { "FUJ02B3", 0 },
+ /* Fujitsu Stylistic LT touchscreens */
+ { "FUJ02B4", 0 },
+ /* Passive Fujitsu Stylistic touchscreens */
+ { "FUJ02B6", 0 },
+ { "FUJ02B7", 0 },
+ { "FUJ02B8", 0 },
+ { "FUJ02B9", 0 },
+ { "FUJ02BC", 0 },
+ /* Fujitsu Wacom Tablet PC device */
+ { "FUJ02E5", 0 },
+ /* Fujitsu P-series tablet PC device */
+ { "FUJ02E6", 0 },
+ /* Fujitsu Wacom 2FGT Tablet PC device */
+ { "FUJ02E7", 0 },
+ /* Fujitsu Wacom 1FGT Tablet PC device */
+ { "FUJ02E9", 0 },
+ /*
+ * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
+ * disguise)
+ */
+ { "LTS0001", 0 },
+ /* Rockwell's (PORALiNK) 33600 INT PNP */
+ { "WCI0003", 0 },
+ /* Unknown PnP modems */
+ { "PNPCXXX", UNKNOWN_DEV },
+ /* More unknown PnP modems */
+ { "PNPDXXX", UNKNOWN_DEV },
+ { "", 0 }
+};
+
+MODULE_DEVICE_TABLE(pnp, pnp_dev_table);
+
+static char *modem_names[] __devinitdata = {
+ "MODEM", "Modem", "modem", "FAX", "Fax", "fax",
+ "56K", "56k", "K56", "33.6", "28.8", "14.4",
+ "33,600", "28,800", "14,400", "33.600", "28.800", "14.400",
+ "33600", "28800", "14400", "V.90", "V.34", "V.32", NULL
+};
+
+static int __devinit check_name(char *name)
+{
+ char **tmp;
+
+ for (tmp = modem_names; *tmp; tmp++)
+ if (strstr(name, *tmp))
+ return 1;
+
+ return 0;
+}
+
+static int __devinit check_resources(struct pnp_dev *dev)
+{
+ resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8};
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(base); i++) {
+ if (pnp_possible_config(dev, IORESOURCE_IO, base[i], 8))
+ return 1;
+ }
+
+ return 0;
+}
+
+/*
+ * Given a complete unknown PnP device, try to use some heuristics to
+ * detect modems. Currently use such heuristic set:
+ * - dev->name or dev->bus->name must contain "modem" substring;
+ * - device must have only one IO region (8 byte long) with base address
+ * 0x2e8, 0x3e8, 0x2f8 or 0x3f8.
+ *
+ * Such detection looks very ugly, but can detect at least some of numerous
+ * PnP modems, alternatively we must hardcode all modems in pnp_devices[]
+ * table.
+ */
+static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags)
+{
+ if (!(check_name(pnp_dev_name(dev)) ||
+ (dev->card && check_name(dev->card->name))))
+ return -ENODEV;
+
+ if (check_resources(dev))
+ return 0;
+
+ return -ENODEV;
+}
+
+static int __devinit
+serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
+{
+ struct uart_port port;
+ int ret, line, flags = dev_id->driver_data;
+
+ if (flags & UNKNOWN_DEV) {
+ ret = serial_pnp_guess_board(dev, &flags);
+ if (ret < 0)
+ return ret;
+ }
+
+ memset(&port, 0, sizeof(struct uart_port));
+ if (pnp_irq_valid(dev, 0))
+ port.irq = pnp_irq(dev, 0);
+ if (pnp_port_valid(dev, 0)) {
+ port.iobase = pnp_port_start(dev, 0);
+ port.iotype = UPIO_PORT;
+ } else if (pnp_mem_valid(dev, 0)) {
+ port.mapbase = pnp_mem_start(dev, 0);
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_IOREMAP;
+ } else
+ return -ENODEV;
+
+#ifdef SERIAL_DEBUG_PNP
+ printk(KERN_DEBUG
+ "Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
+ port.iobase, port.mapbase, port.irq, port.iotype);
+#endif
+
+ port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+ if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE)
+ port.flags |= UPF_SHARE_IRQ;
+ port.uartclk = 1843200;
+ port.dev = &dev->dev;
+
+ line = serial8250_register_port(&port);
+ if (line < 0)
+ return -ENODEV;
+
+ pnp_set_drvdata(dev, (void *)((long)line + 1));
+ return 0;
+}
+
+static void __devexit serial_pnp_remove(struct pnp_dev *dev)
+{
+ long line = (long)pnp_get_drvdata(dev);
+ if (line)
+ serial8250_unregister_port(line - 1);
+}
+
+#ifdef CONFIG_PM
+static int serial_pnp_suspend(struct pnp_dev *dev, pm_message_t state)
+{
+ long line = (long)pnp_get_drvdata(dev);
+
+ if (!line)
+ return -ENODEV;
+ serial8250_suspend_port(line - 1);
+ return 0;
+}
+
+static int serial_pnp_resume(struct pnp_dev *dev)
+{
+ long line = (long)pnp_get_drvdata(dev);
+
+ if (!line)
+ return -ENODEV;
+ serial8250_resume_port(line - 1);
+ return 0;
+}
+#else
+#define serial_pnp_suspend NULL
+#define serial_pnp_resume NULL
+#endif /* CONFIG_PM */
+
+static struct pnp_driver serial_pnp_driver = {
+ .name = "serial",
+ .probe = serial_pnp_probe,
+ .remove = __devexit_p(serial_pnp_remove),
+ .suspend = serial_pnp_suspend,
+ .resume = serial_pnp_resume,
+ .id_table = pnp_dev_table,
+};
+
+static int __init serial8250_pnp_init(void)
+{
+ return pnp_register_driver(&serial_pnp_driver);
+}
+
+static void __exit serial8250_pnp_exit(void)
+{
+ pnp_unregister_driver(&serial_pnp_driver);
+}
+
+module_init(serial8250_pnp_init);
+module_exit(serial8250_pnp_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic 8250/16x50 PnP serial driver");
--- /dev/null
+#
+# The 8250/16550 serial drivers. You shouldn't be in this list unless
+# you somehow have an implicit or explicit dependency on SERIAL_8250.
+#
+
+config SERIAL_8250
+ tristate "8250/16550 and compatible serial support"
+ select SERIAL_CORE
+ ---help---
+ This selects whether you want to include the driver for the standard
+ serial ports. The standard answer is Y. People who might say N
+ here are those that are setting up dedicated Ethernet WWW/FTP
+ servers, or users that have one of the various bus mice instead of a
+ serial mouse and don't intend to use their machine's standard serial
+ port for anything. (Note that the Cyclades and Stallion multi
+ serial port drivers do not need this driver built in for them to
+ work.)
+
+ To compile this driver as a module, choose M here: the
+ module will be called 8250.
+ [WARNING: Do not compile this driver as a module if you are using
+ non-standard serial ports, since the configuration information will
+ be lost when the driver is unloaded. This limitation may be lifted
+ in the future.]
+
+ BTW1: If you have a mouseman serial mouse which is not recognized by
+ the X window system, try running gpm first.
+
+ BTW2: If you intend to use a software modem (also called Winmodem)
+ under Linux, forget it. These modems are crippled and require
+ proprietary drivers which are only available under Windows.
+
+ Most people will say Y or M here, so that they can use serial mice,
+ modems and similar devices connecting to the standard serial ports.
+
+config SERIAL_8250_CONSOLE
+ bool "Console on 8250/16550 and compatible serial port"
+ depends on SERIAL_8250=y
+ select SERIAL_CORE_CONSOLE
+ ---help---
+ If you say Y here, it will be possible to use a serial port as the
+ system console (the system console is the device which receives all
+ kernel messages and warnings and which allows logins in single user
+ mode). This could be useful if some terminal or printer is connected
+ to that serial port.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyS1". (Try "man bootparam" or see the documentation of
+ your boot loader (grub or lilo or loadlin) about how to pass options
+ to the kernel at boot time.)
+
+ If you don't have a VGA card installed and you say Y here, the
+ kernel will automatically use the first serial line, /dev/ttyS0, as
+ system console.
+
+ You can set that using a kernel command line option such as
+ "console=uart8250,io,0x3f8,9600n8"
+ "console=uart8250,mmio,0xff5e0000,115200n8".
+ and it will switch to normal serial console when the corresponding
+ port is ready.
+ "earlycon=uart8250,io,0x3f8,9600n8"
+ "earlycon=uart8250,mmio,0xff5e0000,115200n8".
+ it will not only setup early console.
+
+ If unsure, say N.
+
+config FIX_EARLYCON_MEM
+ bool
+ depends on X86
+ default y
+
+config SERIAL_8250_GSC
+ tristate
+ depends on SERIAL_8250 && GSC
+ default SERIAL_8250
+
+config SERIAL_8250_PCI
+ tristate "8250/16550 PCI device support" if EXPERT
+ depends on SERIAL_8250 && PCI
+ default SERIAL_8250
+ help
+ This builds standard PCI serial support. You may be able to
+ disable this feature if you only need legacy serial support.
+ Saves about 9K.
+
+config SERIAL_8250_PNP
+ tristate "8250/16550 PNP device support" if EXPERT
+ depends on SERIAL_8250 && PNP
+ default SERIAL_8250
+ help
+ This builds standard PNP serial support. You may be able to
+ disable this feature if you only need legacy serial support.
+
+config SERIAL_8250_HP300
+ tristate
+ depends on SERIAL_8250 && HP300
+ default SERIAL_8250
+
+config SERIAL_8250_CS
+ tristate "8250/16550 PCMCIA device support"
+ depends on PCMCIA && SERIAL_8250
+ ---help---
+ Say Y here to enable support for 16-bit PCMCIA serial devices,
+ including serial port cards, modems, and the modem functions of
+ multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
+ credit-card size devices often used with laptops.)
+
+ To compile this driver as a module, choose M here: the
+ module will be called serial_cs.
+
+ If unsure, say N.
+
+config SERIAL_8250_NR_UARTS
+ int "Maximum number of 8250/16550 serial ports"
+ depends on SERIAL_8250
+ default "4"
+ help
+ Set this to the number of serial ports you want the driver
+ to support. This includes any ports discovered via ACPI or
+ PCI enumeration and any ports that may be added at run-time
+ via hot-plug, or any ISA multi-port serial cards.
+
+config SERIAL_8250_RUNTIME_UARTS
+ int "Number of 8250/16550 serial ports to register at runtime"
+ depends on SERIAL_8250
+ range 0 SERIAL_8250_NR_UARTS
+ default "4"
+ help
+ Set this to the maximum number of serial ports you want
+ the kernel to register at boot time. This can be overridden
+ with the module parameter "nr_uarts", or boot-time parameter
+ 8250.nr_uarts
+
+config SERIAL_8250_EXTENDED
+ bool "Extended 8250/16550 serial driver options"
+ depends on SERIAL_8250
+ help
+ If you wish to use any non-standard features of the standard "dumb"
+ driver, say Y here. This includes HUB6 support, shared serial
+ interrupts, special multiport support, support for more than the
+ four COM 1/2/3/4 boards, etc.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about serial driver options. If unsure, say N.
+
+config SERIAL_8250_MANY_PORTS
+ bool "Support more than 4 legacy serial ports"
+ depends on SERIAL_8250_EXTENDED && !IA64
+ help
+ Say Y here if you have dumb serial boards other than the four
+ standard COM 1/2/3/4 ports. This may happen if you have an AST
+ FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
+ from <http://www.tldp.org/docs.html#howto>), or other custom
+ serial port hardware which acts similar to standard serial port
+ hardware. If you only use the standard COM 1/2/3/4 ports, you can
+ say N here to save some memory. You can also say Y if you have an
+ "intelligent" multiport card such as Cyclades, Digiboards, etc.
+
+#
+# Multi-port serial cards
+#
+
+config SERIAL_8250_FOURPORT
+ tristate "Support Fourport cards"
+ depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+ help
+ Say Y here if you have an AST FourPort serial board.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_fourport.
+
+config SERIAL_8250_ACCENT
+ tristate "Support Accent cards"
+ depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+ help
+ Say Y here if you have an Accent Async serial board.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_accent.
+
+config SERIAL_8250_BOCA
+ tristate "Support Boca cards"
+ depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+ help
+ Say Y here if you have a Boca serial board. Please read the Boca
+ mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_boca.
+
+config SERIAL_8250_EXAR_ST16C554
+ tristate "Support Exar ST16C554/554D Quad UART"
+ depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+ help
+ The Uplogix Envoy TU301 uses this Exar Quad UART. If you are
+ tinkering with your Envoy TU301, or have a machine with this UART,
+ say Y here.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_exar_st16c554.
+
+config SERIAL_8250_HUB6
+ tristate "Support Hub6 cards"
+ depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+ help
+ Say Y here if you have a HUB6 serial board.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_hub6.
+
+#
+# Misc. options/drivers.
+#
+
+config SERIAL_8250_SHARE_IRQ
+ bool "Support for sharing serial interrupts"
+ depends on SERIAL_8250_EXTENDED
+ help
+ Some serial boards have hardware support which allows multiple dumb
+ serial ports on the same board to share a single IRQ. To enable
+ support for this in the serial driver, say Y here.
+
+config SERIAL_8250_DETECT_IRQ
+ bool "Autodetect IRQ on standard ports (unsafe)"
+ depends on SERIAL_8250_EXTENDED
+ help
+ Say Y here if you want the kernel to try to guess which IRQ
+ to use for your serial port.
+
+ This is considered unsafe; it is far better to configure the IRQ in
+ a boot script using the setserial command.
+
+ If unsure, say N.
+
+config SERIAL_8250_RSA
+ bool "Support RSA serial ports"
+ depends on SERIAL_8250_EXTENDED
+ help
+ ::: To be written :::
+
+config SERIAL_8250_MCA
+ tristate "Support 8250-type ports on MCA buses"
+ depends on SERIAL_8250 != n && MCA
+ help
+ Say Y here if you have a MCA serial ports.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_mca.
+
+config SERIAL_8250_ACORN
+ tristate "Acorn expansion card serial port support"
+ depends on ARCH_ACORN && SERIAL_8250
+ help
+ If you have an Atomwide Serial card or Serial Port card for an Acorn
+ system, say Y to this option. The driver can handle 1, 2, or 3 port
+ cards. If unsure, say N.
+
+config SERIAL_8250_RM9K
+ bool "Support for MIPS RM9xxx integrated serial port"
+ depends on SERIAL_8250 != n && SERIAL_RM9000
+ select SERIAL_8250_SHARE_IRQ
+ help
+ Selecting this option will add support for the integrated serial
+ port hardware found on MIPS RM9122 and similar processors.
+ If unsure, say N.
+
+config SERIAL_8250_FSL
+ bool
+ depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550
+ default PPC
+
+config SERIAL_8250_DW
+ tristate "Support for Synopsys DesignWare 8250 quirks"
+ depends on SERIAL_8250 && OF
+ help
+ Selecting this option will enable handling of the extra features
+ present in the Synopsys DesignWare APB UART.
--- /dev/null
+#
+# Makefile for the 8250 serial device drivers.
+#
+
+obj-$(CONFIG_SERIAL_8250) += 8250.o
+obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
+obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
+obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
+obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
+obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o
+obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
+obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o
+obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o
+obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
+obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
+obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
+obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
+obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
+obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
+obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
--- /dev/null
+/*
+ * m32r_sio.c
+ *
+ * Driver for M32R serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ * Based on drivers/serial/8250.c.
+ *
+ * Copyright (C) 2001 Russell King.
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/*
+ * A note about mapbase / membase
+ *
+ * mapbase is the physical address of the IO port. Currently, we don't
+ * support this very well, and it may well be dropped from this driver
+ * in future. As such, mapbase should be NULL.
+ *
+ * membase is an 'ioremapped' cookie. This is compatible with the old
+ * serial.c driver, and is currently the preferred form.
+ */
+
+#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/delay.h>
+
+#include <asm/m32r.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#define PORT_M32R_BASE PORT_M32R_SIO
+#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1)
+#define BAUD_RATE 115200
+
+#include <linux/serial_core.h>
+#include "m32r_sio.h"
+#include "m32r_sio_reg.h"
+
+/*
+ * Debugging.
+ */
+#if 0
+#define DEBUG_AUTOCONF(fmt...) printk(fmt)
+#else
+#define DEBUG_AUTOCONF(fmt...) do { } while (0)
+#endif
+
+#if 0
+#define DEBUG_INTR(fmt...) printk(fmt)
+#else
+#define DEBUG_INTR(fmt...) do { } while (0)
+#endif
+
+#define PASS_LIMIT 256
+
+/*
+ * We default to IRQ0 for the "no irq" hack. Some
+ * machine types want others as well - they're free
+ * to redefine this in their header file.
+ */
+#define is_real_interrupt(irq) ((irq) != 0)
+
+#define BASE_BAUD 115200
+
+/* Standard COM flags */
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+
+/*
+ * SERIAL_PORT_DFNS tells us about built-in ports that have no
+ * standard enumeration mechanism. Platforms that can find all
+ * serial ports via mechanisms like ACPI or PCI need not supply it.
+ */
+#if defined(CONFIG_PLAT_USRV)
+
+#define SERIAL_PORT_DFNS \
+ /* UART CLK PORT IRQ FLAGS */ \
+ { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \
+ { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */
+
+#else /* !CONFIG_PLAT_USRV */
+
+#if defined(CONFIG_SERIAL_M32R_PLDSIO)
+#define SERIAL_PORT_DFNS \
+ { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \
+ STD_COM_FLAGS }, /* ttyS0 */
+#else
+#define SERIAL_PORT_DFNS \
+ { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \
+ STD_COM_FLAGS }, /* ttyS0 */
+#endif
+
+#endif /* !CONFIG_PLAT_USRV */
+
+static struct old_serial_port old_serial_port[] = {
+ SERIAL_PORT_DFNS
+};
+
+#define UART_NR ARRAY_SIZE(old_serial_port)
+
+struct uart_sio_port {
+ struct uart_port port;
+ struct timer_list timer; /* "no irq" timer */
+ struct list_head list; /* ports on this IRQ */
+ unsigned short rev;
+ unsigned char acr;
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr_mask; /* mask of user bits */
+ unsigned char mcr_force; /* mask of forced bits */
+ unsigned char lsr_break_flag;
+
+ /*
+ * We provide a per-port pm hook.
+ */
+ void (*pm)(struct uart_port *port,
+ unsigned int state, unsigned int old);
+};
+
+struct irq_info {
+ spinlock_t lock;
+ struct list_head *head;
+};
+
+static struct irq_info irq_lists[NR_IRQS];
+
+/*
+ * Here we define the default xmit fifo size used for each type of UART.
+ */
+static const struct serial_uart_config uart_config[] = {
+ [PORT_UNKNOWN] = {
+ .name = "unknown",
+ .dfl_xmit_fifo_size = 1,
+ .flags = 0,
+ },
+ [PORT_INDEX(PORT_M32R_SIO)] = {
+ .name = "M32RSIO",
+ .dfl_xmit_fifo_size = 1,
+ .flags = 0,
+ },
+};
+
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+
+#define __sio_in(x) inw((unsigned long)(x))
+#define __sio_out(v,x) outw((v),(unsigned long)(x))
+
+static inline void sio_set_baud_rate(unsigned long baud)
+{
+ unsigned short sbaud;
+ sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1;
+ __sio_out(sbaud, PLD_ESIO0BAUR);
+}
+
+static void sio_reset(void)
+{
+ unsigned short tmp;
+
+ tmp = __sio_in(PLD_ESIO0RXB);
+ tmp = __sio_in(PLD_ESIO0RXB);
+ tmp = __sio_in(PLD_ESIO0CR);
+ sio_set_baud_rate(BAUD_RATE);
+ __sio_out(0x0300, PLD_ESIO0CR);
+ __sio_out(0x0003, PLD_ESIO0CR);
+}
+
+static void sio_init(void)
+{
+ unsigned short tmp;
+
+ tmp = __sio_in(PLD_ESIO0RXB);
+ tmp = __sio_in(PLD_ESIO0RXB);
+ tmp = __sio_in(PLD_ESIO0CR);
+ __sio_out(0x0300, PLD_ESIO0CR);
+ __sio_out(0x0003, PLD_ESIO0CR);
+}
+
+static void sio_error(int *status)
+{
+ printk("SIO0 error[%04x]\n", *status);
+ do {
+ sio_init();
+ } while ((*status = __sio_in(PLD_ESIO0CR)) != 3);
+}
+
+#else /* not CONFIG_SERIAL_M32R_PLDSIO */
+
+#define __sio_in(x) inl(x)
+#define __sio_out(v,x) outl((v),(x))
+
+static inline void sio_set_baud_rate(unsigned long baud)
+{
+ unsigned long i, j;
+
+ i = boot_cpu_data.bus_clock / (baud * 16);
+ j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud;
+ i -= 1;
+ j = (j + 1) >> 1;
+
+ __sio_out(i, M32R_SIO0_BAUR_PORTL);
+ __sio_out(j, M32R_SIO0_RBAUR_PORTL);
+}
+
+static void sio_reset(void)
+{
+ __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */
+ __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */
+ __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */
+ sio_set_baud_rate(BAUD_RATE);
+ __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL);
+ __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */
+}
+
+static void sio_init(void)
+{
+ unsigned int tmp;
+
+ tmp = __sio_in(M32R_SIO0_RXB_PORTL);
+ tmp = __sio_in(M32R_SIO0_RXB_PORTL);
+ tmp = __sio_in(M32R_SIO0_STS_PORTL);
+ __sio_out(0x00000003, M32R_SIO0_CR_PORTL);
+}
+
+static void sio_error(int *status)
+{
+ printk("SIO0 error[%04x]\n", *status);
+ do {
+ sio_init();
+ } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3);
+}
+
+#endif /* CONFIG_SERIAL_M32R_PLDSIO */
+
+static unsigned int sio_in(struct uart_sio_port *up, int offset)
+{
+ return __sio_in(up->port.iobase + offset);
+}
+
+static void sio_out(struct uart_sio_port *up, int offset, int value)
+{
+ __sio_out(value, up->port.iobase + offset);
+}
+
+static unsigned int serial_in(struct uart_sio_port *up, int offset)
+{
+ if (!offset)
+ return 0;
+
+ return __sio_in(offset);
+}
+
+static void serial_out(struct uart_sio_port *up, int offset, int value)
+{
+ if (!offset)
+ return;
+
+ __sio_out(value, offset);
+}
+
+static void m32r_sio_stop_tx(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ if (up->ier & UART_IER_THRI) {
+ up->ier &= ~UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static void m32r_sio_start_tx(struct uart_port *port)
+{
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ struct circ_buf *xmit = &up->port.state->xmit;
+
+ if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ }
+ while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY);
+#else
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+#endif
+}
+
+static void m32r_sio_stop_rx(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static void m32r_sio_enable_ms(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ up->ier |= UART_IER_MSI;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static void receive_chars(struct uart_sio_port *up, int *status)
+{
+ struct tty_struct *tty = up->port.state->port.tty;
+ unsigned char ch;
+ unsigned char flag;
+ int max_count = 256;
+
+ do {
+ ch = sio_in(up, SIORXB);
+ flag = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE))) {
+ /*
+ * For statistics only
+ */
+ if (*status & UART_LSR_BI) {
+ *status &= ~(UART_LSR_FE | UART_LSR_PE);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ goto ignore_char;
+ } else if (*status & UART_LSR_PE)
+ up->port.icount.parity++;
+ else if (*status & UART_LSR_FE)
+ up->port.icount.frame++;
+ if (*status & UART_LSR_OE)
+ up->port.icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ingored.
+ */
+ *status &= up->port.read_status_mask;
+
+ if (up->port.line == up->port.cons->index) {
+ /* Recover the break flag from console xmit */
+ *status |= up->lsr_break_flag;
+ up->lsr_break_flag = 0;
+ }
+
+ if (*status & UART_LSR_BI) {
+ DEBUG_INTR("handling break....");
+ flag = TTY_BREAK;
+ } else if (*status & UART_LSR_PE)
+ flag = TTY_PARITY;
+ else if (*status & UART_LSR_FE)
+ flag = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(&up->port, ch))
+ goto ignore_char;
+ if ((*status & up->port.ignore_status_mask) == 0)
+ tty_insert_flip_char(tty, ch, flag);
+
+ if (*status & UART_LSR_OE) {
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character.
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ ignore_char:
+ *status = serial_in(up, UART_LSR);
+ } while ((*status & UART_LSR_DR) && (max_count-- > 0));
+ tty_flip_buffer_push(tty);
+}
+
+static void transmit_chars(struct uart_sio_port *up)
+{
+ struct circ_buf *xmit = &up->port.state->xmit;
+ int count;
+
+ if (up->port.x_char) {
+#ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */
+ serial_out(up, UART_TX, up->port.x_char);
+#endif
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ m32r_sio_stop_tx(&up->port);
+ return;
+ }
+
+ count = up->port.fifosize;
+ do {
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ while (!(serial_in(up, UART_LSR) & UART_LSR_THRE));
+
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ DEBUG_INTR("THRE...");
+
+ if (uart_circ_empty(xmit))
+ m32r_sio_stop_tx(&up->port);
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static inline void m32r_sio_handle_port(struct uart_sio_port *up,
+ unsigned int status)
+{
+ DEBUG_INTR("status = %x...", status);
+
+ if (status & 0x04)
+ receive_chars(up, &status);
+ if (status & 0x01)
+ transmit_chars(up);
+}
+
+/*
+ * This is the serial driver's interrupt routine.
+ *
+ * Arjan thinks the old way was overly complex, so it got simplified.
+ * Alan disagrees, saying that need the complexity to handle the weird
+ * nature of ISA shared interrupts. (This is a special exception.)
+ *
+ * In order to handle ISA shared interrupts properly, we need to check
+ * that all ports have been serviced, and therefore the ISA interrupt
+ * line has been de-asserted.
+ *
+ * This means we need to loop through all ports. checking that they
+ * don't have an interrupt pending.
+ */
+static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id)
+{
+ struct irq_info *i = dev_id;
+ struct list_head *l, *end = NULL;
+ int pass_counter = 0;
+
+ DEBUG_INTR("m32r_sio_interrupt(%d)...", irq);
+
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+// if (irq == PLD_IRQ_SIO0_SND)
+// irq = PLD_IRQ_SIO0_RCV;
+#else
+ if (irq == M32R_IRQ_SIO0_S)
+ irq = M32R_IRQ_SIO0_R;
+#endif
+
+ spin_lock(&i->lock);
+
+ l = i->head;
+ do {
+ struct uart_sio_port *up;
+ unsigned int sts;
+
+ up = list_entry(l, struct uart_sio_port, list);
+
+ sts = sio_in(up, SIOSTS);
+ if (sts & 0x5) {
+ spin_lock(&up->port.lock);
+ m32r_sio_handle_port(up, sts);
+ spin_unlock(&up->port.lock);
+
+ end = NULL;
+ } else if (end == NULL)
+ end = l;
+
+ l = l->next;
+
+ if (l == i->head && pass_counter++ > PASS_LIMIT) {
+ if (sts & 0xe0)
+ sio_error(&sts);
+ break;
+ }
+ } while (l != end);
+
+ spin_unlock(&i->lock);
+
+ DEBUG_INTR("end.\n");
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * To support ISA shared interrupts, we need to have one interrupt
+ * handler that ensures that the IRQ line has been deasserted
+ * before returning. Failing to do this will result in the IRQ
+ * line being stuck active, and, since ISA irqs are edge triggered,
+ * no more IRQs will be seen.
+ */
+static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up)
+{
+ spin_lock_irq(&i->lock);
+
+ if (!list_empty(i->head)) {
+ if (i->head == &up->list)
+ i->head = i->head->next;
+ list_del(&up->list);
+ } else {
+ BUG_ON(i->head != &up->list);
+ i->head = NULL;
+ }
+
+ spin_unlock_irq(&i->lock);
+}
+
+static int serial_link_irq_chain(struct uart_sio_port *up)
+{
+ struct irq_info *i = irq_lists + up->port.irq;
+ int ret, irq_flags = 0;
+
+ spin_lock_irq(&i->lock);
+
+ if (i->head) {
+ list_add(&up->list, i->head);
+ spin_unlock_irq(&i->lock);
+
+ ret = 0;
+ } else {
+ INIT_LIST_HEAD(&up->list);
+ i->head = &up->list;
+ spin_unlock_irq(&i->lock);
+
+ ret = request_irq(up->port.irq, m32r_sio_interrupt,
+ irq_flags, "SIO0-RX", i);
+ ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt,
+ irq_flags, "SIO0-TX", i);
+ if (ret < 0)
+ serial_do_unlink(i, up);
+ }
+
+ return ret;
+}
+
+static void serial_unlink_irq_chain(struct uart_sio_port *up)
+{
+ struct irq_info *i = irq_lists + up->port.irq;
+
+ BUG_ON(i->head == NULL);
+
+ if (list_empty(i->head)) {
+ free_irq(up->port.irq, i);
+ free_irq(up->port.irq + 1, i);
+ }
+
+ serial_do_unlink(i, up);
+}
+
+/*
+ * This function is used to handle ports that do not have an interrupt.
+ */
+static void m32r_sio_timeout(unsigned long data)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)data;
+ unsigned int timeout;
+ unsigned int sts;
+
+ sts = sio_in(up, SIOSTS);
+ if (sts & 0x5) {
+ spin_lock(&up->port.lock);
+ m32r_sio_handle_port(up, sts);
+ spin_unlock(&up->port.lock);
+ }
+
+ timeout = up->port.timeout;
+ timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
+ mod_timer(&up->timer, jiffies + timeout);
+}
+
+static unsigned int m32r_sio_tx_empty(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ unsigned long flags;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return ret;
+}
+
+static unsigned int m32r_sio_get_mctrl(struct uart_port *port)
+{
+ return 0;
+}
+
+static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+
+}
+
+static void m32r_sio_break_ctl(struct uart_port *port, int break_state)
+{
+
+}
+
+static int m32r_sio_startup(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ int retval;
+
+ sio_init();
+
+ /*
+ * If the "interrupt" for this port doesn't correspond with any
+ * hardware interrupt, we use a timer-based system. The original
+ * driver used to do this with IRQ0.
+ */
+ if (!is_real_interrupt(up->port.irq)) {
+ unsigned int timeout = up->port.timeout;
+
+ timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
+
+ up->timer.data = (unsigned long)up;
+ mod_timer(&up->timer, jiffies + timeout);
+ } else {
+ retval = serial_link_irq_chain(up);
+ if (retval)
+ return retval;
+ }
+
+ /*
+ * Finally, enable interrupts. Note: Modem status interrupts
+ * are set via set_termios(), which will be occurring imminently
+ * anyway, so we don't enable them here.
+ * - M32R_SIO: 0x0c
+ * - M32R_PLDSIO: 0x04
+ */
+ up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
+ sio_out(up, SIOTRCR, up->ier);
+
+ /*
+ * And clear the interrupt registers again for luck.
+ */
+ sio_reset();
+
+ return 0;
+}
+
+static void m32r_sio_shutdown(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ /*
+ * Disable interrupts from this port
+ */
+ up->ier = 0;
+ sio_out(up, SIOTRCR, 0);
+
+ /*
+ * Disable break condition and FIFOs
+ */
+
+ sio_init();
+
+ if (!is_real_interrupt(up->port.irq))
+ del_timer_sync(&up->timer);
+ else
+ serial_unlink_irq_chain(up);
+}
+
+static unsigned int m32r_sio_get_divisor(struct uart_port *port,
+ unsigned int baud)
+{
+ return uart_get_divisor(port, baud);
+}
+
+static void m32r_sio_set_termios(struct uart_port *port,
+ struct ktermios *termios, struct ktermios *old)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ unsigned char cval = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = UART_LCR_WLEN5;
+ break;
+ case CS6:
+ cval = UART_LCR_WLEN6;
+ break;
+ case CS7:
+ cval = UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ cval = UART_LCR_WLEN8;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= UART_LCR_STOP;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+#ifdef CMSPAR
+ if (termios->c_cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+#endif
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4);
+#else
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+#endif
+ quot = m32r_sio_get_divisor(port, baud);
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ sio_set_baud_rate(baud);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characteres to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ up->port.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+
+ serial_out(up, UART_IER, up->ier);
+
+ up->lcr = cval; /* Save LCR */
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void m32r_sio_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ if (up->pm)
+ up->pm(port, state, oldstate);
+}
+
+/*
+ * Resource handling. This is complicated by the fact that resources
+ * depend on the port type. Maybe we should be claiming the standard
+ * 8250 ports, and then trying to get other resources as necessary?
+ */
+static int
+m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res)
+{
+ unsigned int size = 8 << up->port.regshift;
+#ifndef CONFIG_SERIAL_M32R_PLDSIO
+ unsigned long start;
+#endif
+ int ret = 0;
+
+ switch (up->port.iotype) {
+ case UPIO_MEM:
+ if (up->port.mapbase) {
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+ *res = request_mem_region(up->port.mapbase, size, "serial");
+#else
+ start = up->port.mapbase;
+ *res = request_mem_region(start, size, "serial");
+#endif
+ if (!*res)
+ ret = -EBUSY;
+ }
+ break;
+
+ case UPIO_PORT:
+ *res = request_region(up->port.iobase, size, "serial");
+ if (!*res)
+ ret = -EBUSY;
+ break;
+ }
+ return ret;
+}
+
+static void m32r_sio_release_port(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ unsigned long start, offset = 0, size = 0;
+
+ size <<= up->port.regshift;
+
+ switch (up->port.iotype) {
+ case UPIO_MEM:
+ if (up->port.mapbase) {
+ /*
+ * Unmap the area.
+ */
+ iounmap(up->port.membase);
+ up->port.membase = NULL;
+
+ start = up->port.mapbase;
+
+ if (size)
+ release_mem_region(start + offset, size);
+ release_mem_region(start, 8 << up->port.regshift);
+ }
+ break;
+
+ case UPIO_PORT:
+ start = up->port.iobase;
+
+ if (size)
+ release_region(start + offset, size);
+ release_region(start + offset, 8 << up->port.regshift);
+ break;
+
+ default:
+ break;
+ }
+}
+
+static int m32r_sio_request_port(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ struct resource *res = NULL;
+ int ret = 0;
+
+ ret = m32r_sio_request_std_resource(up, &res);
+
+ /*
+ * If we have a mapbase, then request that as well.
+ */
+ if (ret == 0 && up->port.flags & UPF_IOREMAP) {
+ int size = resource_size(res);
+
+ up->port.membase = ioremap(up->port.mapbase, size);
+ if (!up->port.membase)
+ ret = -ENOMEM;
+ }
+
+ if (ret < 0) {
+ if (res)
+ release_resource(res);
+ }
+
+ return ret;
+}
+
+static void m32r_sio_config_port(struct uart_port *port, int unused)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1);
+ up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int
+m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (ser->irq >= nr_irqs || ser->irq < 0 ||
+ ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
+ ser->type >= ARRAY_SIZE(uart_config))
+ return -EINVAL;
+ return 0;
+}
+
+static const char *
+m32r_sio_type(struct uart_port *port)
+{
+ int type = port->type;
+
+ if (type >= ARRAY_SIZE(uart_config))
+ type = 0;
+ return uart_config[type].name;
+}
+
+static struct uart_ops m32r_sio_pops = {
+ .tx_empty = m32r_sio_tx_empty,
+ .set_mctrl = m32r_sio_set_mctrl,
+ .get_mctrl = m32r_sio_get_mctrl,
+ .stop_tx = m32r_sio_stop_tx,
+ .start_tx = m32r_sio_start_tx,
+ .stop_rx = m32r_sio_stop_rx,
+ .enable_ms = m32r_sio_enable_ms,
+ .break_ctl = m32r_sio_break_ctl,
+ .startup = m32r_sio_startup,
+ .shutdown = m32r_sio_shutdown,
+ .set_termios = m32r_sio_set_termios,
+ .pm = m32r_sio_pm,
+ .type = m32r_sio_type,
+ .release_port = m32r_sio_release_port,
+ .request_port = m32r_sio_request_port,
+ .config_port = m32r_sio_config_port,
+ .verify_port = m32r_sio_verify_port,
+};
+
+static struct uart_sio_port m32r_sio_ports[UART_NR];
+
+static void __init m32r_sio_init_ports(void)
+{
+ struct uart_sio_port *up;
+ static int first = 1;
+ int i;
+
+ if (!first)
+ return;
+ first = 0;
+
+ for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port);
+ i++, up++) {
+ up->port.iobase = old_serial_port[i].port;
+ up->port.irq = irq_canonicalize(old_serial_port[i].irq);
+ up->port.uartclk = old_serial_port[i].baud_base * 16;
+ up->port.flags = old_serial_port[i].flags;
+ up->port.membase = old_serial_port[i].iomem_base;
+ up->port.iotype = old_serial_port[i].io_type;
+ up->port.regshift = old_serial_port[i].iomem_reg_shift;
+ up->port.ops = &m32r_sio_pops;
+ }
+}
+
+static void __init m32r_sio_register_ports(struct uart_driver *drv)
+{
+ int i;
+
+ m32r_sio_init_ports();
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_sio_port *up = &m32r_sio_ports[i];
+
+ up->port.line = i;
+ up->port.ops = &m32r_sio_pops;
+ init_timer(&up->timer);
+ up->timer.function = m32r_sio_timeout;
+
+ up->mcr_mask = ~0;
+ up->mcr_force = 0;
+
+ uart_add_one_port(drv, &up->port);
+ }
+}
+
+#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE
+
+/*
+ * Wait for transmitter & holding register to empty
+ */
+static inline void wait_for_xmitr(struct uart_sio_port *up)
+{
+ unsigned int status, tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ do {
+ status = sio_in(up, SIOSTS);
+
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while ((status & UART_EMPTY) != UART_EMPTY);
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ tmout = 1000000;
+ while (--tmout)
+ udelay(1);
+ }
+}
+
+static void m32r_sio_console_putchar(struct uart_port *port, int ch)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ wait_for_xmitr(up);
+ sio_out(up, SIOTXB, ch);
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void m32r_sio_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct uart_sio_port *up = &m32r_sio_ports[co->index];
+ unsigned int ier;
+
+ /*
+ * First save the UER then disable the interrupts
+ */
+ ier = sio_in(up, SIOTRCR);
+ sio_out(up, SIOTRCR, 0);
+
+ uart_console_write(&up->port, s, count, m32r_sio_console_putchar);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ sio_out(up, SIOTRCR, ier);
+}
+
+static int __init m32r_sio_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index >= UART_NR)
+ co->index = 0;
+ port = &m32r_sio_ports[co->index].port;
+
+ /*
+ * Temporary fix.
+ */
+ spin_lock_init(&port->lock);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver m32r_sio_reg;
+static struct console m32r_sio_console = {
+ .name = "ttyS",
+ .write = m32r_sio_console_write,
+ .device = uart_console_device,
+ .setup = m32r_sio_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &m32r_sio_reg,
+};
+
+static int __init m32r_sio_console_init(void)
+{
+ sio_reset();
+ sio_init();
+ m32r_sio_init_ports();
+ register_console(&m32r_sio_console);
+ return 0;
+}
+console_initcall(m32r_sio_console_init);
+
+#define M32R_SIO_CONSOLE &m32r_sio_console
+#else
+#define M32R_SIO_CONSOLE NULL
+#endif
+
+static struct uart_driver m32r_sio_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "sio",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = UART_NR,
+ .cons = M32R_SIO_CONSOLE,
+};
+
+/**
+ * m32r_sio_suspend_port - suspend one serial port
+ * @line: serial line number
+ *
+ * Suspend one serial port.
+ */
+void m32r_sio_suspend_port(int line)
+{
+ uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port);
+}
+
+/**
+ * m32r_sio_resume_port - resume one serial port
+ * @line: serial line number
+ *
+ * Resume one serial port.
+ */
+void m32r_sio_resume_port(int line)
+{
+ uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port);
+}
+
+static int __init m32r_sio_init(void)
+{
+ int ret, i;
+
+ printk(KERN_INFO "Serial: M32R SIO driver\n");
+
+ for (i = 0; i < nr_irqs; i++)
+ spin_lock_init(&irq_lists[i].lock);
+
+ ret = uart_register_driver(&m32r_sio_reg);
+ if (ret >= 0)
+ m32r_sio_register_ports(&m32r_sio_reg);
+
+ return ret;
+}
+
+static void __exit m32r_sio_exit(void)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++)
+ uart_remove_one_port(&m32r_sio_reg, &m32r_sio_ports[i].port);
+
+ uart_unregister_driver(&m32r_sio_reg);
+}
+
+module_init(m32r_sio_init);
+module_exit(m32r_sio_exit);
+
+EXPORT_SYMBOL(m32r_sio_suspend_port);
+EXPORT_SYMBOL(m32r_sio_resume_port);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic M32R SIO serial driver");
--- /dev/null
+/*
+ * m32r_sio.h
+ *
+ * Driver for M32R serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ * Based on drivers/serial/8250.h.
+ *
+ * Copyright (C) 2001 Russell King.
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+
+struct m32r_sio_probe {
+ struct module *owner;
+ int (*pci_init_one)(struct pci_dev *dev);
+ void (*pci_remove_one)(struct pci_dev *dev);
+ void (*pnp_init)(void);
+};
+
+int m32r_sio_register_probe(struct m32r_sio_probe *probe);
+void m32r_sio_unregister_probe(struct m32r_sio_probe *probe);
+void m32r_sio_get_irq_map(unsigned int *map);
+void m32r_sio_suspend_port(int line);
+void m32r_sio_resume_port(int line);
+
+struct old_serial_port {
+ unsigned int uart;
+ unsigned int baud_base;
+ unsigned int port;
+ unsigned int irq;
+ unsigned int flags;
+ unsigned char io_type;
+ unsigned char __iomem *iomem_base;
+ unsigned short iomem_reg_shift;
+};
+
+#define _INLINE_ inline
+
+#define PROBE_RSA (1 << 0)
+#define PROBE_ANY (~0)
+
+#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
--- /dev/null
+/*
+ * m32r_sio_reg.h
+ *
+ * Copyright (C) 1992, 1994 by Theodore Ts'o.
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ *
+ * Redistribution of this file is permitted under the terms of the GNU
+ * Public License (GPL)
+ *
+ * These are the UART port assignments, expressed as offsets from the base
+ * register. These assignments should hold for any serial port based on
+ * a 8250, 16450, or 16550(A).
+ */
+
+#ifndef _M32R_SIO_REG_H
+#define _M32R_SIO_REG_H
+
+
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+
+#define SIOCR 0x000
+#define SIOMOD0 0x002
+#define SIOMOD1 0x004
+#define SIOSTS 0x006
+#define SIOTRCR 0x008
+#define SIOBAUR 0x00a
+// #define SIORBAUR 0x018
+#define SIOTXB 0x00c
+#define SIORXB 0x00e
+
+#define UART_RX ((unsigned long) PLD_ESIO0RXB)
+ /* In: Receive buffer (DLAB=0) */
+#define UART_TX ((unsigned long) PLD_ESIO0TXB)
+ /* Out: Transmit buffer (DLAB=0) */
+#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
+#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx
+ * In: Fifo count
+ * Out: Fifo custom trigger levels
+ * XR16C85x only */
+
+#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */
+#define UART_IER ((unsigned long) PLD_ESIO0INTCR)
+ /* Out: Interrupt Enable Register */
+#define UART_FCTR 0 /* (LCR=BF) Feature Control Register
+ * XR16C85x only */
+
+#define UART_IIR 0 /* In: Interrupt ID Register */
+#define UART_FCR 0 /* Out: FIFO Control Register */
+#define UART_EFR 0 /* I/O: Extended Features Register */
+ /* (DLAB=1, 16C660 only) */
+
+#define UART_LCR 0 /* Out: Line Control Register */
+#define UART_MCR 0 /* Out: Modem Control Register */
+#define UART_LSR ((unsigned long) PLD_ESIO0STS)
+ /* In: Line Status Register */
+#define UART_MSR 0 /* In: Modem Status Register */
+#define UART_SCR 0 /* I/O: Scratch Register */
+#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register
+ * FCTR bit 6 selects SCR or EMSR
+ * XR16c85x only */
+
+#else /* not CONFIG_SERIAL_M32R_PLDSIO */
+
+#define SIOCR 0x000
+#define SIOMOD0 0x004
+#define SIOMOD1 0x008
+#define SIOSTS 0x00c
+#define SIOTRCR 0x010
+#define SIOBAUR 0x014
+#define SIORBAUR 0x018
+#define SIOTXB 0x01c
+#define SIORXB 0x020
+
+#define UART_RX M32R_SIO0_RXB_PORTL /* In: Receive buffer (DLAB=0) */
+#define UART_TX M32R_SIO0_TXB_PORTL /* Out: Transmit buffer (DLAB=0) */
+#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
+#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx
+ * In: Fifo count
+ * Out: Fifo custom trigger levels
+ * XR16C85x only */
+
+#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */
+#define UART_IER M32R_SIO0_TRCR_PORTL /* Out: Interrupt Enable Register */
+#define UART_FCTR 0 /* (LCR=BF) Feature Control Register
+ * XR16C85x only */
+
+#define UART_IIR 0 /* In: Interrupt ID Register */
+#define UART_FCR 0 /* Out: FIFO Control Register */
+#define UART_EFR 0 /* I/O: Extended Features Register */
+ /* (DLAB=1, 16C660 only) */
+
+#define UART_LCR 0 /* Out: Line Control Register */
+#define UART_MCR 0 /* Out: Modem Control Register */
+#define UART_LSR M32R_SIO0_STS_PORTL /* In: Line Status Register */
+#define UART_MSR 0 /* In: Modem Status Register */
+#define UART_SCR 0 /* I/O: Scratch Register */
+#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register
+ * FCTR bit 6 selects SCR or EMSR
+ * XR16c85x only */
+
+#endif /* CONFIG_SERIAL_M32R_PLDSIO */
+
+#define UART_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+/*
+ * These are the definitions for the Line Control Register
+ *
+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
+ */
+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
+#define UART_LCR_SBC 0x40 /* Set break control */
+#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
+#define UART_LCR_EPAR 0x10 /* Even parity select */
+#define UART_LCR_PARITY 0x08 /* Parity Enable */
+#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */
+#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
+#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
+#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
+#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
+
+/*
+ * These are the definitions for the Line Status Register
+ */
+#define UART_LSR_TEMT 0x02 /* Transmitter empty */
+#define UART_LSR_THRE 0x01 /* Transmit-hold-register empty */
+#define UART_LSR_BI 0x00 /* Break interrupt indicator */
+#define UART_LSR_FE 0x80 /* Frame error indicator */
+#define UART_LSR_PE 0x40 /* Parity error indicator */
+#define UART_LSR_OE 0x20 /* Overrun error indicator */
+#define UART_LSR_DR 0x04 /* Receiver data ready */
+
+/*
+ * These are the definitions for the Interrupt Identification Register
+ */
+#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
+#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
+
+#define UART_IIR_MSI 0x00 /* Modem status interrupt */
+#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
+#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
+#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
+
+/*
+ * These are the definitions for the Interrupt Enable Register
+ */
+#define UART_IER_MSI 0x00 /* Enable Modem status interrupt */
+#define UART_IER_RLSI 0x08 /* Enable receiver line status interrupt */
+#define UART_IER_THRI 0x03 /* Enable Transmitter holding register int. */
+#define UART_IER_RDI 0x04 /* Enable receiver data interrupt */
+
+#endif /* _M32R_SIO_REG_H */
--- /dev/null
+/*======================================================================
+
+ A driver for PCMCIA serial devices
+
+ serial_cs.c 1.134 2002/05/04 05:48:53
+
+ The contents of this file are subject to the Mozilla Public
+ License Version 1.1 (the "License"); you may not use this file
+ except in compliance with the License. You may obtain a copy of
+ the License at http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS
+ IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ implied. See the License for the specific language governing
+ rights and limitations under the License.
+
+ The initial developer of the original code is David A. Hinds
+ <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
+ are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+
+ Alternatively, the contents of this file may be used under the
+ terms of the GNU General Public License version 2 (the "GPL"), in which
+ case the provisions of the GPL are applicable instead of the
+ above. If you wish to allow the use of your version of this file
+ only under the terms of the GPL and not to allow others to use
+ your version of this file under the MPL, indicate your decision
+ by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL. If you do not delete
+ the provisions above, a recipient may use your version of this
+ file under either the MPL or the GPL.
+
+======================================================================*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/serial_core.h>
+#include <linux/delay.h>
+#include <linux/major.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/cisreg.h>
+
+#include "8250.h"
+
+
+/*====================================================================*/
+
+/* Parameters that can be set with 'insmod' */
+
+/* Enable the speaker? */
+static int do_sound = 1;
+/* Skip strict UART tests? */
+static int buggy_uart;
+
+module_param(do_sound, int, 0444);
+module_param(buggy_uart, int, 0444);
+
+/*====================================================================*/
+
+/* Table of multi-port card ID's */
+
+struct serial_quirk {
+ unsigned int manfid;
+ unsigned int prodid;
+ int multi; /* 1 = multifunction, > 1 = # ports */
+ void (*config)(struct pcmcia_device *);
+ void (*setup)(struct pcmcia_device *, struct uart_port *);
+ void (*wakeup)(struct pcmcia_device *);
+ int (*post)(struct pcmcia_device *);
+};
+
+struct serial_info {
+ struct pcmcia_device *p_dev;
+ int ndev;
+ int multi;
+ int slave;
+ int manfid;
+ int prodid;
+ int c950ctrl;
+ int line[4];
+ const struct serial_quirk *quirk;
+};
+
+struct serial_cfg_mem {
+ tuple_t tuple;
+ cisparse_t parse;
+ u_char buf[256];
+};
+
+/*
+ * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
+ * manfid 0x0160, 0x0104
+ * This card appears to have a 14.7456MHz clock.
+ */
+/* Generic Modem: MD55x (GPRS/EDGE) have
+ * Elan VPU16551 UART with 14.7456MHz oscillator
+ * manfid 0x015D, 0x4C45
+ */
+static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
+{
+ port->uartclk = 14745600;
+}
+
+static int quirk_post_ibm(struct pcmcia_device *link)
+{
+ u8 val;
+ int ret;
+
+ ret = pcmcia_read_config_byte(link, 0x800, &val);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_write_config_byte(link, 0x800, val | 1);
+ if (ret)
+ goto failed;
+ return 0;
+
+ failed:
+ return -ENODEV;
+}
+
+/*
+ * Nokia cards are not really multiport cards. Shouldn't this
+ * be handled by setting the quirk entry .multi = 0 | 1 ?
+ */
+static void quirk_config_nokia(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+
+ if (info->multi > 1)
+ info->multi = 1;
+}
+
+static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+
+ if (info->c950ctrl)
+ outb(12, info->c950ctrl + 1);
+}
+
+/* request_region? oxsemi branch does no request_region too... */
+/*
+ * This sequence is needed to properly initialize MC45 attached to OXCF950.
+ * I tried decreasing these msleep()s, but it worked properly (survived
+ * 1000 stop/start operations) with these timeouts (or bigger).
+ */
+static void quirk_wakeup_possio_gcc(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+ unsigned int ctrl = info->c950ctrl;
+
+ outb(0xA, ctrl + 1);
+ msleep(100);
+ outb(0xE, ctrl + 1);
+ msleep(300);
+ outb(0xC, ctrl + 1);
+ msleep(100);
+ outb(0xE, ctrl + 1);
+ msleep(200);
+ outb(0xF, ctrl + 1);
+ msleep(100);
+ outb(0xE, ctrl + 1);
+ msleep(100);
+ outb(0xC, ctrl + 1);
+}
+
+/*
+ * Socket Dual IO: this enables irq's for second port
+ */
+static void quirk_config_socket(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+
+ if (info->multi)
+ link->config_flags |= CONF_ENABLE_ESR;
+}
+
+static const struct serial_quirk quirks[] = {
+ {
+ .manfid = 0x0160,
+ .prodid = 0x0104,
+ .multi = -1,
+ .setup = quirk_setup_brainboxes_0104,
+ }, {
+ .manfid = 0x015D,
+ .prodid = 0x4C45,
+ .multi = -1,
+ .setup = quirk_setup_brainboxes_0104,
+ }, {
+ .manfid = MANFID_IBM,
+ .prodid = ~0,
+ .multi = -1,
+ .post = quirk_post_ibm,
+ }, {
+ .manfid = MANFID_INTEL,
+ .prodid = PRODID_INTEL_DUAL_RS232,
+ .multi = 2,
+ }, {
+ .manfid = MANFID_NATINST,
+ .prodid = PRODID_NATINST_QUAD_RS232,
+ .multi = 4,
+ }, {
+ .manfid = MANFID_NOKIA,
+ .prodid = ~0,
+ .multi = -1,
+ .config = quirk_config_nokia,
+ }, {
+ .manfid = MANFID_OMEGA,
+ .prodid = PRODID_OMEGA_QSP_100,
+ .multi = 4,
+ }, {
+ .manfid = MANFID_OXSEMI,
+ .prodid = ~0,
+ .multi = -1,
+ .wakeup = quirk_wakeup_oxsemi,
+ }, {
+ .manfid = MANFID_POSSIO,
+ .prodid = PRODID_POSSIO_GCC,
+ .multi = -1,
+ .wakeup = quirk_wakeup_possio_gcc,
+ }, {
+ .manfid = MANFID_QUATECH,
+ .prodid = PRODID_QUATECH_DUAL_RS232,
+ .multi = 2,
+ }, {
+ .manfid = MANFID_QUATECH,
+ .prodid = PRODID_QUATECH_DUAL_RS232_D1,
+ .multi = 2,
+ }, {
+ .manfid = MANFID_QUATECH,
+ .prodid = PRODID_QUATECH_DUAL_RS232_G,
+ .multi = 2,
+ }, {
+ .manfid = MANFID_QUATECH,
+ .prodid = PRODID_QUATECH_QUAD_RS232,
+ .multi = 4,
+ }, {
+ .manfid = MANFID_SOCKET,
+ .prodid = PRODID_SOCKET_DUAL_RS232,
+ .multi = 2,
+ .config = quirk_config_socket,
+ }, {
+ .manfid = MANFID_SOCKET,
+ .prodid = ~0,
+ .multi = -1,
+ .config = quirk_config_socket,
+ }
+};
+
+
+static int serial_config(struct pcmcia_device * link);
+
+
+static void serial_remove(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+ int i;
+
+ dev_dbg(&link->dev, "serial_release\n");
+
+ /*
+ * Recheck to see if the device is still configured.
+ */
+ for (i = 0; i < info->ndev; i++)
+ serial8250_unregister_port(info->line[i]);
+
+ if (!info->slave)
+ pcmcia_disable_device(link);
+}
+
+static int serial_suspend(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+ int i;
+
+ for (i = 0; i < info->ndev; i++)
+ serial8250_suspend_port(info->line[i]);
+
+ return 0;
+}
+
+static int serial_resume(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+ int i;
+
+ for (i = 0; i < info->ndev; i++)
+ serial8250_resume_port(info->line[i]);
+
+ if (info->quirk && info->quirk->wakeup)
+ info->quirk->wakeup(link);
+
+ return 0;
+}
+
+static int serial_probe(struct pcmcia_device *link)
+{
+ struct serial_info *info;
+
+ dev_dbg(&link->dev, "serial_attach()\n");
+
+ /* Create new serial device */
+ info = kzalloc(sizeof (*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+ info->p_dev = link;
+ link->priv = info;
+
+ link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+ if (do_sound)
+ link->config_flags |= CONF_ENABLE_SPKR;
+
+ return serial_config(link);
+}
+
+static void serial_detach(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+
+ dev_dbg(&link->dev, "serial_detach\n");
+
+ /*
+ * Ensure that the ports have been released.
+ */
+ serial_remove(link);
+
+ /* free bits */
+ kfree(info);
+}
+
+/*====================================================================*/
+
+static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
+ unsigned int iobase, int irq)
+{
+ struct uart_port port;
+ int line;
+
+ memset(&port, 0, sizeof (struct uart_port));
+ port.iobase = iobase;
+ port.irq = irq;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+ port.uartclk = 1843200;
+ port.dev = &handle->dev;
+ if (buggy_uart)
+ port.flags |= UPF_BUGGY_UART;
+
+ if (info->quirk && info->quirk->setup)
+ info->quirk->setup(handle, &port);
+
+ line = serial8250_register_port(&port);
+ if (line < 0) {
+ printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
+ "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
+ return -EINVAL;
+ }
+
+ info->line[info->ndev] = line;
+ info->ndev++;
+
+ return 0;
+}
+
+/*====================================================================*/
+
+static int pfc_config(struct pcmcia_device *p_dev)
+{
+ unsigned int port = 0;
+ struct serial_info *info = p_dev->priv;
+
+ if ((p_dev->resource[1]->end != 0) &&
+ (resource_size(p_dev->resource[1]) == 8)) {
+ port = p_dev->resource[1]->start;
+ info->slave = 1;
+ } else if ((info->manfid == MANFID_OSITECH) &&
+ (resource_size(p_dev->resource[0]) == 0x40)) {
+ port = p_dev->resource[0]->start + 0x28;
+ info->slave = 1;
+ }
+ if (info->slave)
+ return setup_serial(p_dev, info, port, p_dev->irq);
+
+ dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
+ return -ENODEV;
+}
+
+static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data)
+{
+ static const int size_table[2] = { 8, 16 };
+ int *try = priv_data;
+
+ if (p_dev->resource[0]->start == 0)
+ return -ENODEV;
+
+ if ((*try & 0x1) == 0)
+ p_dev->io_lines = 16;
+
+ if (p_dev->resource[0]->end != size_table[(*try >> 1)])
+ return -ENODEV;
+
+ p_dev->resource[0]->end = 8;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+
+ return pcmcia_request_io(p_dev);
+}
+
+static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
+ void *priv_data)
+{
+ static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ int j;
+
+ if (p_dev->io_lines > 3)
+ return -ENODEV;
+
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[0]->end = 8;
+
+ for (j = 0; j < 5; j++) {
+ p_dev->resource[0]->start = base[j];
+ p_dev->io_lines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev))
+ return 0;
+ }
+ return -ENODEV;
+}
+
+static int simple_config(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+ int i = -ENODEV, try;
+
+ /* First pass: look for a config entry that looks normal.
+ * Two tries: without IO aliases, then with aliases */
+ link->config_flags |= CONF_AUTO_SET_VPP;
+ for (try = 0; try < 4; try++)
+ if (!pcmcia_loop_config(link, simple_config_check, &try))
+ goto found_port;
+
+ /* Second pass: try to find an entry that isn't picky about
+ its base address, then try to grab any standard serial port
+ address, and finally try to get any free port. */
+ if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
+ goto found_port;
+
+ dev_warn(&link->dev, "no usable port range found, giving up\n");
+ return -1;
+
+found_port:
+ if (info->multi && (info->manfid == MANFID_3COM))
+ link->config_index &= ~(0x08);
+
+ /*
+ * Apply any configuration quirks.
+ */
+ if (info->quirk && info->quirk->config)
+ info->quirk->config(link);
+
+ i = pcmcia_enable_device(link);
+ if (i != 0)
+ return -1;
+ return setup_serial(link, info, link->resource[0]->start, link->irq);
+}
+
+static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data)
+{
+ int *multi = priv_data;
+
+ if (p_dev->resource[1]->end)
+ return -EINVAL;
+
+ /* The quad port cards have bad CIS's, so just look for a
+ window larger than 8 ports and assume it will be right */
+ if (p_dev->resource[0]->end <= 8)
+ return -EINVAL;
+
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[0]->end = *multi * 8;
+
+ if (pcmcia_request_io(p_dev))
+ return -ENODEV;
+ return 0;
+}
+
+static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
+ void *priv_data)
+{
+ int *base2 = priv_data;
+
+ if (!p_dev->resource[0]->end || !p_dev->resource[1]->end ||
+ p_dev->resource[0]->start + 8 != p_dev->resource[1]->start)
+ return -ENODEV;
+
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 8;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+
+ if (pcmcia_request_io(p_dev))
+ return -ENODEV;
+
+ *base2 = p_dev->resource[0]->start + 8;
+ return 0;
+}
+
+static int multi_config(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+ int i, base2 = 0;
+
+ /* First, look for a generic full-sized window */
+ if (!pcmcia_loop_config(link, multi_config_check, &info->multi))
+ base2 = link->resource[0]->start + 8;
+ else {
+ /* If that didn't work, look for two windows */
+ info->multi = 2;
+ if (pcmcia_loop_config(link, multi_config_check_notpicky,
+ &base2)) {
+ dev_warn(&link->dev, "no usable port range "
+ "found, giving up\n");
+ return -ENODEV;
+ }
+ }
+
+ if (!link->irq)
+ dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
+
+ /*
+ * Apply any configuration quirks.
+ */
+ if (info->quirk && info->quirk->config)
+ info->quirk->config(link);
+
+ i = pcmcia_enable_device(link);
+ if (i != 0)
+ return -ENODEV;
+
+ /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
+ * 8 registers are for the UART, the others are extra registers.
+ * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
+ */
+ if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
+ info->prodid == PRODID_POSSIO_GCC)) {
+ int err;
+
+ if (link->config_index == 1 ||
+ link->config_index == 3) {
+ err = setup_serial(link, info, base2,
+ link->irq);
+ base2 = link->resource[0]->start;
+ } else {
+ err = setup_serial(link, info, link->resource[0]->start,
+ link->irq);
+ }
+ info->c950ctrl = base2;
+
+ /*
+ * FIXME: We really should wake up the port prior to
+ * handing it over to the serial layer.
+ */
+ if (info->quirk && info->quirk->wakeup)
+ info->quirk->wakeup(link);
+
+ return 0;
+ }
+
+ setup_serial(link, info, link->resource[0]->start, link->irq);
+ for (i = 0; i < info->multi - 1; i++)
+ setup_serial(link, info, base2 + (8 * i),
+ link->irq);
+ return 0;
+}
+
+static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data)
+{
+ struct serial_info *info = p_dev->priv;
+
+ if (!p_dev->resource[0]->end)
+ return -EINVAL;
+
+ if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0))
+ info->multi = p_dev->resource[0]->end >> 3;
+
+ if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8)
+ && (p_dev->resource[1]->end == 8))
+ info->multi = 2;
+
+ return 0; /* break */
+}
+
+
+static int serial_config(struct pcmcia_device * link)
+{
+ struct serial_info *info = link->priv;
+ int i;
+
+ dev_dbg(&link->dev, "serial_config\n");
+
+ /* Is this a compliant multifunction card? */
+ info->multi = (link->socket->functions > 1);
+
+ /* Is this a multiport card? */
+ info->manfid = link->manf_id;
+ info->prodid = link->card_id;
+
+ for (i = 0; i < ARRAY_SIZE(quirks); i++)
+ if ((quirks[i].manfid == ~0 ||
+ quirks[i].manfid == info->manfid) &&
+ (quirks[i].prodid == ~0 ||
+ quirks[i].prodid == info->prodid)) {
+ info->quirk = &quirks[i];
+ break;
+ }
+
+ /* Another check for dual-serial cards: look for either serial or
+ multifunction cards that ask for appropriate IO port ranges */
+ if ((info->multi == 0) &&
+ (link->has_func_id) &&
+ (link->socket->pcmcia_pfc == 0) &&
+ ((link->func_id == CISTPL_FUNCID_MULTI) ||
+ (link->func_id == CISTPL_FUNCID_SERIAL)))
+ pcmcia_loop_config(link, serial_check_for_multi, info);
+
+ /*
+ * Apply any multi-port quirk.
+ */
+ if (info->quirk && info->quirk->multi != -1)
+ info->multi = info->quirk->multi;
+
+ dev_info(&link->dev,
+ "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
+ link->manf_id, link->card_id,
+ link->socket->pcmcia_pfc, info->multi, info->quirk);
+ if (link->socket->pcmcia_pfc)
+ i = pfc_config(link);
+ else if (info->multi > 1)
+ i = multi_config(link);
+ else
+ i = simple_config(link);
+
+ if (i || info->ndev == 0)
+ goto failed;
+
+ /*
+ * Apply any post-init quirk. FIXME: This should really happen
+ * before we register the port, since it might already be in use.
+ */
+ if (info->quirk && info->quirk->post)
+ if (info->quirk->post(link))
+ goto failed;
+
+ return 0;
+
+failed:
+ dev_warn(&link->dev, "failed to initialize\n");
+ serial_remove(link);
+ return -ENODEV;
+}
+
+static const struct pcmcia_device_id serial_ids[] = {
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
+ PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
+ PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
+ PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
+ PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
+ PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
+ PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
+ PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
+ PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
+ PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
+ PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
+ PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
+ PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
+ PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
+ PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
+ PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
+ PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
+ PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
+ PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
+ PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
+ PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
+ PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
+ PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
+ PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
+ PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */
+ PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */
+ PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */
+ PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
+ PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */
+ PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
+ PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
+ PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
+ PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
+ PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
+ PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */
+ PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */
+ PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */
+ PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
+ PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
+ PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
+ PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
+ PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
+ PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
+ PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
+ PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
+ PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
+ PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
+ PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
+ PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
+ PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
+ PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
+ PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
+ PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
+ PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
+ PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
+ PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
+ PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
+ PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b),
+ PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
+ PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
+ PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447),
+ PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
+ PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
+ PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
+ PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
+ PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
+ PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
+ PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
+ PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
+ PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
+ PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38),
+ PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292),
+ PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
+ PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
+ PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
+ PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
+ PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
+ PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
+ PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
+ PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
+ PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
+ PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
+ PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
+ PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
+ PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
+ PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
+ PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
+ PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
+ PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
+ PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442),
+ PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190),
+ PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262),
+ PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d),
+ PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa),
+ PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903),
+ PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676),
+ PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767),
+ PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
+ PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
+ PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
+ PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
+ PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
+ PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
+ PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
+ PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
+ PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
+ PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
+ PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
+ PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
+ /* too generic */
+ /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
+ /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
+ PCMCIA_DEVICE_FUNC_ID(2),
+ PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, serial_ids);
+
+MODULE_FIRMWARE("cis/PCMLM28.cis");
+MODULE_FIRMWARE("cis/DP83903.cis");
+MODULE_FIRMWARE("cis/3CCFEM556.cis");
+MODULE_FIRMWARE("cis/3CXEM556.cis");
+MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
+MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
+MODULE_FIRMWARE("cis/SW_555_SER.cis");
+MODULE_FIRMWARE("cis/MT5634ZLX.cis");
+MODULE_FIRMWARE("cis/COMpad2.cis");
+MODULE_FIRMWARE("cis/COMpad4.cis");
+MODULE_FIRMWARE("cis/RS-COM-2P.cis");
+
+static struct pcmcia_driver serial_cs_driver = {
+ .owner = THIS_MODULE,
+ .name = "serial_cs",
+ .probe = serial_probe,
+ .remove = serial_detach,
+ .id_table = serial_ids,
+ .suspend = serial_suspend,
+ .resume = serial_resume,
+};
+
+static int __init init_serial_cs(void)
+{
+ return pcmcia_register_driver(&serial_cs_driver);
+}
+
+static void __exit exit_serial_cs(void)
+{
+ pcmcia_unregister_driver(&serial_cs_driver);
+}
+
+module_init(init_serial_cs);
+module_exit(exit_serial_cs);
+
+MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Copyright (C) 2005 Russell King.
- * Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-
-#define PORT(_base,_irq) \
- { \
- .iobase = _base, \
- .irq = _irq, \
- .uartclk = 1843200, \
- .iotype = UPIO_PORT, \
- .flags = UPF_BOOT_AUTOCONF, \
- }
-
-static struct plat_serial8250_port accent_data[] = {
- PORT(0x330, 4),
- PORT(0x338, 4),
- { },
-};
-
-static struct platform_device accent_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_ACCENT,
- .dev = {
- .platform_data = accent_data,
- },
-};
-
-static int __init accent_init(void)
-{
- return platform_device_register(&accent_device);
-}
-
-module_init(accent_init);
-
-MODULE_AUTHOR("Russell King");
-MODULE_DESCRIPTION("8250 serial probe module for Accent Async cards");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * linux/drivers/serial/acorn.c
- *
- * Copyright (C) 1996-2003 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/ecard.h>
-#include <asm/string.h>
-
-#include "8250.h"
-
-#define MAX_PORTS 3
-
-struct serial_card_type {
- unsigned int num_ports;
- unsigned int uartclk;
- unsigned int type;
- unsigned int offset[MAX_PORTS];
-};
-
-struct serial_card_info {
- unsigned int num_ports;
- int ports[MAX_PORTS];
- void __iomem *vaddr;
-};
-
-static int __devinit
-serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
-{
- struct serial_card_info *info;
- struct serial_card_type *type = id->data;
- struct uart_port port;
- unsigned long bus_addr;
- unsigned int i;
-
- info = kzalloc(sizeof(struct serial_card_info), GFP_KERNEL);
- if (!info)
- return -ENOMEM;
-
- info->num_ports = type->num_ports;
-
- bus_addr = ecard_resource_start(ec, type->type);
- info->vaddr = ecardm_iomap(ec, type->type, 0, 0);
- if (!info->vaddr) {
- kfree(info);
- return -ENOMEM;
- }
-
- ecard_set_drvdata(ec, info);
-
- memset(&port, 0, sizeof(struct uart_port));
- port.irq = ec->irq;
- port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
- port.uartclk = type->uartclk;
- port.iotype = UPIO_MEM;
- port.regshift = 2;
- port.dev = &ec->dev;
-
- for (i = 0; i < info->num_ports; i ++) {
- port.membase = info->vaddr + type->offset[i];
- port.mapbase = bus_addr + type->offset[i];
-
- info->ports[i] = serial8250_register_port(&port);
- }
-
- return 0;
-}
-
-static void __devexit serial_card_remove(struct expansion_card *ec)
-{
- struct serial_card_info *info = ecard_get_drvdata(ec);
- int i;
-
- ecard_set_drvdata(ec, NULL);
-
- for (i = 0; i < info->num_ports; i++)
- if (info->ports[i] > 0)
- serial8250_unregister_port(info->ports[i]);
-
- kfree(info);
-}
-
-static struct serial_card_type atomwide_type = {
- .num_ports = 3,
- .uartclk = 7372800,
- .type = ECARD_RES_IOCSLOW,
- .offset = { 0x2800, 0x2400, 0x2000 },
-};
-
-static struct serial_card_type serport_type = {
- .num_ports = 2,
- .uartclk = 3686400,
- .type = ECARD_RES_IOCSLOW,
- .offset = { 0x2000, 0x2020 },
-};
-
-static const struct ecard_id serial_cids[] = {
- { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, &atomwide_type },
- { MANU_SERPORT, PROD_SERPORT_DSPORT, &serport_type },
- { 0xffff, 0xffff }
-};
-
-static struct ecard_driver serial_card_driver = {
- .probe = serial_card_probe,
- .remove = __devexit_p(serial_card_remove),
- .id_table = serial_cids,
- .drv = {
- .name = "8250_acorn",
- },
-};
-
-static int __init serial_card_init(void)
-{
- return ecard_register_driver(&serial_card_driver);
-}
-
-static void __exit serial_card_exit(void)
-{
- ecard_remove_driver(&serial_card_driver);
-}
-
-MODULE_AUTHOR("Russell King");
-MODULE_DESCRIPTION("Acorn 8250-compatible serial port expansion card driver");
-MODULE_LICENSE("GPL");
-
-module_init(serial_card_init);
-module_exit(serial_card_exit);
+++ /dev/null
-/*
- * Copyright (C) 2005 Russell King.
- * Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-
-#define PORT(_base,_irq) \
- { \
- .iobase = _base, \
- .irq = _irq, \
- .uartclk = 1843200, \
- .iotype = UPIO_PORT, \
- .flags = UPF_BOOT_AUTOCONF, \
- }
-
-static struct plat_serial8250_port boca_data[] = {
- PORT(0x100, 12),
- PORT(0x108, 12),
- PORT(0x110, 12),
- PORT(0x118, 12),
- PORT(0x120, 12),
- PORT(0x128, 12),
- PORT(0x130, 12),
- PORT(0x138, 12),
- PORT(0x140, 12),
- PORT(0x148, 12),
- PORT(0x150, 12),
- PORT(0x158, 12),
- PORT(0x160, 12),
- PORT(0x168, 12),
- PORT(0x170, 12),
- PORT(0x178, 12),
- { },
-};
-
-static struct platform_device boca_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_BOCA,
- .dev = {
- .platform_data = boca_data,
- },
-};
-
-static int __init boca_init(void)
-{
- return platform_device_register(&boca_device);
-}
-
-module_init(boca_init);
-
-MODULE_AUTHOR("Russell King");
-MODULE_DESCRIPTION("8250 serial probe module for Boca cards");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Synopsys DesignWare 8250 driver.
- *
- * Copyright 2011 Picochip, Jamie Iles.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The Synopsys DesignWare 8250 has an extra feature whereby it detects if the
- * LCR is written whilst busy. If it is, then a busy detect interrupt is
- * raised, the LCR needs to be rewritten and the uart status register read.
- */
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-struct dw8250_data {
- int last_lcr;
- int line;
-};
-
-static void dw8250_serial_out(struct uart_port *p, int offset, int value)
-{
- struct dw8250_data *d = p->private_data;
-
- if (offset == UART_LCR)
- d->last_lcr = value;
-
- offset <<= p->regshift;
- writeb(value, p->membase + offset);
-}
-
-static unsigned int dw8250_serial_in(struct uart_port *p, int offset)
-{
- offset <<= p->regshift;
-
- return readb(p->membase + offset);
-}
-
-static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
-{
- struct dw8250_data *d = p->private_data;
-
- if (offset == UART_LCR)
- d->last_lcr = value;
-
- offset <<= p->regshift;
- writel(value, p->membase + offset);
-}
-
-static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
-{
- offset <<= p->regshift;
-
- return readl(p->membase + offset);
-}
-
-/* Offset for the DesignWare's UART Status Register. */
-#define UART_USR 0x1f
-
-static int dw8250_handle_irq(struct uart_port *p)
-{
- struct dw8250_data *d = p->private_data;
- unsigned int iir = p->serial_in(p, UART_IIR);
-
- if (serial8250_handle_irq(p, iir)) {
- return 1;
- } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
- /* Clear the USR and write the LCR again. */
- (void)p->serial_in(p, UART_USR);
- p->serial_out(p, d->last_lcr, UART_LCR);
-
- return 1;
- }
-
- return 0;
-}
-
-static int __devinit dw8250_probe(struct platform_device *pdev)
-{
- struct uart_port port = {};
- struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- struct device_node *np = pdev->dev.of_node;
- u32 val;
- struct dw8250_data *data;
-
- if (!regs || !irq) {
- dev_err(&pdev->dev, "no registers/irq defined\n");
- return -EINVAL;
- }
-
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
- port.private_data = data;
-
- spin_lock_init(&port.lock);
- port.mapbase = regs->start;
- port.irq = irq->start;
- port.handle_irq = dw8250_handle_irq;
- port.type = PORT_8250;
- port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP |
- UPF_FIXED_PORT | UPF_FIXED_TYPE;
- port.dev = &pdev->dev;
-
- port.iotype = UPIO_MEM;
- port.serial_in = dw8250_serial_in;
- port.serial_out = dw8250_serial_out;
- if (!of_property_read_u32(np, "reg-io-width", &val)) {
- switch (val) {
- case 1:
- break;
- case 4:
- port.iotype = UPIO_MEM32;
- port.serial_in = dw8250_serial_in32;
- port.serial_out = dw8250_serial_out32;
- break;
- default:
- dev_err(&pdev->dev, "unsupported reg-io-width (%u)\n",
- val);
- return -EINVAL;
- }
- }
-
- if (!of_property_read_u32(np, "reg-shift", &val))
- port.regshift = val;
-
- if (of_property_read_u32(np, "clock-frequency", &val)) {
- dev_err(&pdev->dev, "no clock-frequency property set\n");
- return -EINVAL;
- }
- port.uartclk = val;
-
- data->line = serial8250_register_port(&port);
- if (data->line < 0)
- return data->line;
-
- platform_set_drvdata(pdev, data);
-
- return 0;
-}
-
-static int __devexit dw8250_remove(struct platform_device *pdev)
-{
- struct dw8250_data *data = platform_get_drvdata(pdev);
-
- serial8250_unregister_port(data->line);
-
- return 0;
-}
-
-static const struct of_device_id dw8250_match[] = {
- { .compatible = "snps,dw-apb-uart" },
- { /* Sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, dw8250_match);
-
-static struct platform_driver dw8250_platform_driver = {
- .driver = {
- .name = "dw-apb-uart",
- .owner = THIS_MODULE,
- .of_match_table = dw8250_match,
- },
- .probe = dw8250_probe,
- .remove = __devexit_p(dw8250_remove),
-};
-
-module_platform_driver(dw8250_platform_driver);
-
-MODULE_AUTHOR("Jamie Iles");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Synopsys DesignWare 8250 serial port driver");
+++ /dev/null
-/*
- * Early serial console for 8250/16550 devices
- *
- * (c) Copyright 2004 Hewlett-Packard Development Company, L.P.
- * Bjorn Helgaas <bjorn.helgaas@hp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Based on the 8250.c serial driver, Copyright (C) 2001 Russell King,
- * and on early_printk.c by Andi Kleen.
- *
- * This is for use before the serial driver has initialized, in
- * particular, before the UARTs have been discovered and named.
- * Instead of specifying the console device as, e.g., "ttyS0",
- * we locate the device directly by its MMIO or I/O port address.
- *
- * The user can specify the device directly, e.g.,
- * earlycon=uart8250,io,0x3f8,9600n8
- * earlycon=uart8250,mmio,0xff5e0000,115200n8
- * earlycon=uart8250,mmio32,0xff5e0000,115200n8
- * or
- * console=uart8250,io,0x3f8,9600n8
- * console=uart8250,mmio,0xff5e0000,115200n8
- * console=uart8250,mmio32,0xff5e0000,115200n8
- */
-
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <asm/io.h>
-#include <asm/serial.h>
-#ifdef CONFIG_FIX_EARLYCON_MEM
-#include <asm/pgtable.h>
-#include <asm/fixmap.h>
-#endif
-
-struct early_serial8250_device {
- struct uart_port port;
- char options[16]; /* e.g., 115200n8 */
- unsigned int baud;
-};
-
-static struct early_serial8250_device early_device;
-
-static unsigned int __init serial_in(struct uart_port *port, int offset)
-{
- switch (port->iotype) {
- case UPIO_MEM:
- return readb(port->membase + offset);
- case UPIO_MEM32:
- return readl(port->membase + (offset << 2));
- case UPIO_PORT:
- return inb(port->iobase + offset);
- default:
- return 0;
- }
-}
-
-static void __init serial_out(struct uart_port *port, int offset, int value)
-{
- switch (port->iotype) {
- case UPIO_MEM:
- writeb(value, port->membase + offset);
- break;
- case UPIO_MEM32:
- writel(value, port->membase + (offset << 2));
- break;
- case UPIO_PORT:
- outb(value, port->iobase + offset);
- break;
- }
-}
-
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
-static void __init wait_for_xmitr(struct uart_port *port)
-{
- unsigned int status;
-
- for (;;) {
- status = serial_in(port, UART_LSR);
- if ((status & BOTH_EMPTY) == BOTH_EMPTY)
- return;
- cpu_relax();
- }
-}
-
-static void __init serial_putc(struct uart_port *port, int c)
-{
- wait_for_xmitr(port);
- serial_out(port, UART_TX, c);
-}
-
-static void __init early_serial8250_write(struct console *console,
- const char *s, unsigned int count)
-{
- struct uart_port *port = &early_device.port;
- unsigned int ier;
-
- /* Save the IER and disable interrupts */
- ier = serial_in(port, UART_IER);
- serial_out(port, UART_IER, 0);
-
- uart_console_write(port, s, count, serial_putc);
-
- /* Wait for transmitter to become empty and restore the IER */
- wait_for_xmitr(port);
- serial_out(port, UART_IER, ier);
-}
-
-static unsigned int __init probe_baud(struct uart_port *port)
-{
- unsigned char lcr, dll, dlm;
- unsigned int quot;
-
- lcr = serial_in(port, UART_LCR);
- serial_out(port, UART_LCR, lcr | UART_LCR_DLAB);
- dll = serial_in(port, UART_DLL);
- dlm = serial_in(port, UART_DLM);
- serial_out(port, UART_LCR, lcr);
-
- quot = (dlm << 8) | dll;
- return (port->uartclk / 16) / quot;
-}
-
-static void __init init_port(struct early_serial8250_device *device)
-{
- struct uart_port *port = &device->port;
- unsigned int divisor;
- unsigned char c;
-
- serial_out(port, UART_LCR, 0x3); /* 8n1 */
- serial_out(port, UART_IER, 0); /* no interrupt */
- serial_out(port, UART_FCR, 0); /* no fifo */
- serial_out(port, UART_MCR, 0x3); /* DTR + RTS */
-
- divisor = port->uartclk / (16 * device->baud);
- c = serial_in(port, UART_LCR);
- serial_out(port, UART_LCR, c | UART_LCR_DLAB);
- serial_out(port, UART_DLL, divisor & 0xff);
- serial_out(port, UART_DLM, (divisor >> 8) & 0xff);
- serial_out(port, UART_LCR, c & ~UART_LCR_DLAB);
-}
-
-static int __init parse_options(struct early_serial8250_device *device,
- char *options)
-{
- struct uart_port *port = &device->port;
- int mmio, mmio32, length;
-
- if (!options)
- return -ENODEV;
-
- port->uartclk = BASE_BAUD * 16;
-
- mmio = !strncmp(options, "mmio,", 5);
- mmio32 = !strncmp(options, "mmio32,", 7);
- if (mmio || mmio32) {
- port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32);
- port->mapbase = simple_strtoul(options + (mmio ? 5 : 7),
- &options, 0);
- if (mmio32)
- port->regshift = 2;
-#ifdef CONFIG_FIX_EARLYCON_MEM
- set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
- port->mapbase & PAGE_MASK);
- port->membase =
- (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
- port->membase += port->mapbase & ~PAGE_MASK;
-#else
- port->membase = ioremap_nocache(port->mapbase, 64);
- if (!port->membase) {
- printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
- __func__,
- (unsigned long long) port->mapbase);
- return -ENOMEM;
- }
-#endif
- } else if (!strncmp(options, "io,", 3)) {
- port->iotype = UPIO_PORT;
- port->iobase = simple_strtoul(options + 3, &options, 0);
- mmio = 0;
- } else
- return -EINVAL;
-
- options = strchr(options, ',');
- if (options) {
- options++;
- device->baud = simple_strtoul(options, NULL, 0);
- length = min(strcspn(options, " "), sizeof(device->options));
- strncpy(device->options, options, length);
- } else {
- device->baud = probe_baud(port);
- snprintf(device->options, sizeof(device->options), "%u",
- device->baud);
- }
-
- if (mmio || mmio32)
- printk(KERN_INFO
- "Early serial console at MMIO%s 0x%llx (options '%s')\n",
- mmio32 ? "32" : "",
- (unsigned long long)port->mapbase,
- device->options);
- else
- printk(KERN_INFO
- "Early serial console at I/O port 0x%lx (options '%s')\n",
- port->iobase,
- device->options);
-
- return 0;
-}
-
-static struct console early_serial8250_console __initdata = {
- .name = "uart",
- .write = early_serial8250_write,
- .flags = CON_PRINTBUFFER | CON_BOOT,
- .index = -1,
-};
-
-static int __init early_serial8250_setup(char *options)
-{
- struct early_serial8250_device *device = &early_device;
- int err;
-
- if (device->port.membase || device->port.iobase)
- return 0;
-
- err = parse_options(device, options);
- if (err < 0)
- return err;
-
- init_port(device);
- return 0;
-}
-
-int __init setup_early_serial8250_console(char *cmdline)
-{
- char *options;
- int err;
-
- options = strstr(cmdline, "uart8250,");
- if (!options) {
- options = strstr(cmdline, "uart,");
- if (!options)
- return 0;
- }
-
- options = strchr(cmdline, ',') + 1;
- err = early_serial8250_setup(options);
- if (err < 0)
- return err;
-
- register_console(&early_serial8250_console);
-
- return 0;
-}
-
-int serial8250_find_port_for_earlycon(void)
-{
- struct early_serial8250_device *device = &early_device;
- struct uart_port *port = &device->port;
- int line;
- int ret;
-
- if (!device->port.membase && !device->port.iobase)
- return -ENODEV;
-
- line = serial8250_find_port(port);
- if (line < 0)
- return -ENODEV;
-
- ret = update_console_cmdline("uart", 8250,
- "ttyS", line, device->options);
- if (ret < 0)
- ret = update_console_cmdline("uart", 0,
- "ttyS", line, device->options);
-
- return ret;
-}
-
-early_param("earlycon", setup_early_serial8250_console);
+++ /dev/null
-/*
- * Written by Paul B Schroeder < pschroeder "at" uplogix "dot" com >
- * Based on 8250_boca.
- *
- * Copyright (C) 2005 Russell King.
- * Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-
-#define PORT(_base,_irq) \
- { \
- .iobase = _base, \
- .irq = _irq, \
- .uartclk = 1843200, \
- .iotype = UPIO_PORT, \
- .flags = UPF_BOOT_AUTOCONF, \
- }
-
-static struct plat_serial8250_port exar_data[] = {
- PORT(0x100, 5),
- PORT(0x108, 5),
- PORT(0x110, 5),
- PORT(0x118, 5),
- { },
-};
-
-static struct platform_device exar_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_EXAR_ST16C554,
- .dev = {
- .platform_data = exar_data,
- },
-};
-
-static int __init exar_init(void)
-{
- return platform_device_register(&exar_device);
-}
-
-module_init(exar_init);
-
-MODULE_AUTHOR("Paul B Schroeder");
-MODULE_DESCRIPTION("8250 serial probe module for Exar cards");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Copyright (C) 2005 Russell King.
- * Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-
-#define PORT(_base,_irq) \
- { \
- .iobase = _base, \
- .irq = _irq, \
- .uartclk = 1843200, \
- .iotype = UPIO_PORT, \
- .flags = UPF_BOOT_AUTOCONF | UPF_FOURPORT, \
- }
-
-static struct plat_serial8250_port fourport_data[] = {
- PORT(0x1a0, 9),
- PORT(0x1a8, 9),
- PORT(0x1b0, 9),
- PORT(0x1b8, 9),
- PORT(0x2a0, 5),
- PORT(0x2a8, 5),
- PORT(0x2b0, 5),
- PORT(0x2b8, 5),
- { },
-};
-
-static struct platform_device fourport_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_FOURPORT,
- .dev = {
- .platform_data = fourport_data,
- },
-};
-
-static int __init fourport_init(void)
-{
- return platform_device_register(&fourport_device);
-}
-
-module_init(fourport_init);
-
-MODULE_AUTHOR("Russell King");
-MODULE_DESCRIPTION("8250 serial probe module for AST Fourport cards");
-MODULE_LICENSE("GPL");
+++ /dev/null
-#include <linux/serial_reg.h>
-#include <linux/serial_8250.h>
-
-#include "8250.h"
-
-/*
- * Freescale 16550 UART "driver", Copyright (C) 2011 Paul Gortmaker.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This isn't a full driver; it just provides an alternate IRQ
- * handler to deal with an errata. Everything else is just
- * using the bog standard 8250 support.
- *
- * We follow code flow of serial8250_default_handle_irq() but add
- * a check for a break and insert a dummy read on the Rx for the
- * immediately following IRQ event.
- *
- * We re-use the already existing "bug handling" lsr_saved_flags
- * field to carry the "what we just did" information from the one
- * IRQ event to the next one.
- */
-
-int fsl8250_handle_irq(struct uart_port *port)
-{
- unsigned char lsr, orig_lsr;
- unsigned long flags;
- unsigned int iir;
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- spin_lock_irqsave(&up->port.lock, flags);
-
- iir = port->serial_in(port, UART_IIR);
- if (iir & UART_IIR_NO_INT) {
- spin_unlock_irqrestore(&up->port.lock, flags);
- return 0;
- }
-
- /* This is the WAR; if last event was BRK, then read and return */
- if (unlikely(up->lsr_saved_flags & UART_LSR_BI)) {
- up->lsr_saved_flags &= ~UART_LSR_BI;
- port->serial_in(port, UART_RX);
- spin_unlock_irqrestore(&up->port.lock, flags);
- return 1;
- }
-
- lsr = orig_lsr = up->port.serial_in(&up->port, UART_LSR);
-
- if (lsr & (UART_LSR_DR | UART_LSR_BI))
- lsr = serial8250_rx_chars(up, lsr);
-
- serial8250_modem_status(up);
-
- if (lsr & UART_LSR_THRE)
- serial8250_tx_chars(up);
-
- up->lsr_saved_flags = orig_lsr;
- spin_unlock_irqrestore(&up->port.lock, flags);
- return 1;
-}
+++ /dev/null
-/*
- * Serial Device Initialisation for Lasi/Asp/Wax/Dino
- *
- * (c) Copyright Matthew Wilcox <willy@debian.org> 2001-2002
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/serial_core.h>
-#include <linux/signal.h>
-#include <linux/types.h>
-
-#include <asm/hardware.h>
-#include <asm/parisc-device.h>
-#include <asm/io.h>
-
-#include "8250.h"
-
-static int __init serial_init_chip(struct parisc_device *dev)
-{
- struct uart_port port;
- unsigned long address;
- int err;
-
- if (!dev->irq) {
- /* We find some unattached serial ports by walking native
- * busses. These should be silently ignored. Otherwise,
- * what we have here is a missing parent device, so tell
- * the user what they're missing.
- */
- if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
- printk(KERN_INFO
- "Serial: device 0x%llx not configured.\n"
- "Enable support for Wax, Lasi, Asp or Dino.\n",
- (unsigned long long)dev->hpa.start);
- return -ENODEV;
- }
-
- address = dev->hpa.start;
- if (dev->id.sversion != 0x8d)
- address += 0x800;
-
- memset(&port, 0, sizeof(port));
- port.iotype = UPIO_MEM;
- /* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */
- port.uartclk = 7272727;
- port.mapbase = address;
- port.membase = ioremap_nocache(address, 16);
- port.irq = dev->irq;
- port.flags = UPF_BOOT_AUTOCONF;
- port.dev = &dev->dev;
-
- err = serial8250_register_port(&port);
- if (err < 0) {
- printk(KERN_WARNING
- "serial8250_register_port returned error %d\n", err);
- iounmap(port.membase);
- return err;
- }
-
- return 0;
-}
-
-static struct parisc_device_id serial_tbl[] = {
- { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 },
- { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c },
- { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d },
- { 0 }
-};
-
-/* Hack. Some machines have SERIAL_0 attached to Lasi and SERIAL_1
- * attached to Dino. Unfortunately, Dino appears before Lasi in the device
- * tree. To ensure that ttyS0 == SERIAL_0, we register two drivers; one
- * which only knows about Lasi and then a second which will find all the
- * other serial ports. HPUX ignores this problem.
- */
-static struct parisc_device_id lasi_tbl[] = {
- { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03B, 0x0008C }, /* C1xx/C1xxL */
- { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03C, 0x0008C }, /* B132L */
- { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03D, 0x0008C }, /* B160L */
- { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03E, 0x0008C }, /* B132L+ */
- { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03F, 0x0008C }, /* B180L+ */
- { HPHW_FIO, HVERSION_REV_ANY_ID, 0x046, 0x0008C }, /* Rocky2 120 */
- { HPHW_FIO, HVERSION_REV_ANY_ID, 0x047, 0x0008C }, /* Rocky2 150 */
- { HPHW_FIO, HVERSION_REV_ANY_ID, 0x04E, 0x0008C }, /* Kiji L2 132 */
- { HPHW_FIO, HVERSION_REV_ANY_ID, 0x056, 0x0008C }, /* Raven+ */
- { 0 }
-};
-
-
-MODULE_DEVICE_TABLE(parisc, serial_tbl);
-
-static struct parisc_driver lasi_driver = {
- .name = "serial_1",
- .id_table = lasi_tbl,
- .probe = serial_init_chip,
-};
-
-static struct parisc_driver serial_driver = {
- .name = "serial",
- .id_table = serial_tbl,
- .probe = serial_init_chip,
-};
-
-static int __init probe_serial_gsc(void)
-{
- register_parisc_driver(&lasi_driver);
- register_parisc_driver(&serial_driver);
- return 0;
-}
-
-module_init(probe_serial_gsc);
-
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Driver for the 98626/98644/internal serial interface on hp300/hp400
- * (based on the National Semiconductor INS8250/NS16550AF/WD16C552 UARTs)
- *
- * Ported from 2.2 and modified to use the normal 8250 driver
- * by Kars de Jong <jongk@linux-m68k.org>, May 2004.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/delay.h>
-#include <linux/dio.h>
-#include <linux/console.h>
-#include <linux/slab.h>
-#include <asm/io.h>
-
-#include "8250.h"
-
-#if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI)
-#warning CONFIG_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure?
-#endif
-
-#ifdef CONFIG_HPAPCI
-struct hp300_port
-{
- struct hp300_port *next; /* next port */
- int line; /* line (tty) number */
-};
-
-static struct hp300_port *hp300_ports;
-#endif
-
-#ifdef CONFIG_HPDCA
-
-static int __devinit hpdca_init_one(struct dio_dev *d,
- const struct dio_device_id *ent);
-static void __devexit hpdca_remove_one(struct dio_dev *d);
-
-static struct dio_device_id hpdca_dio_tbl[] = {
- { DIO_ID_DCA0 },
- { DIO_ID_DCA0REM },
- { DIO_ID_DCA1 },
- { DIO_ID_DCA1REM },
- { 0 }
-};
-
-static struct dio_driver hpdca_driver = {
- .name = "hpdca",
- .id_table = hpdca_dio_tbl,
- .probe = hpdca_init_one,
- .remove = __devexit_p(hpdca_remove_one),
-};
-
-#endif
-
-static unsigned int num_ports;
-
-extern int hp300_uart_scode;
-
-/* Offset to UART registers from base of DCA */
-#define UART_OFFSET 17
-
-#define DCA_ID 0x01 /* ID (read), reset (write) */
-#define DCA_IC 0x03 /* Interrupt control */
-
-/* Interrupt control */
-#define DCA_IC_IE 0x80 /* Master interrupt enable */
-
-#define HPDCA_BAUD_BASE 153600
-
-/* Base address of the Frodo part */
-#define FRODO_BASE (0x41c000)
-
-/*
- * Where we find the 8250-like APCI ports, and how far apart they are.
- */
-#define FRODO_APCIBASE 0x0
-#define FRODO_APCISPACE 0x20
-#define FRODO_APCI_OFFSET(x) (FRODO_APCIBASE + ((x) * FRODO_APCISPACE))
-
-#define HPAPCI_BAUD_BASE 500400
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-/*
- * Parse the bootinfo to find descriptions for headless console and
- * debug serial ports and register them with the 8250 driver.
- * This function should be called before serial_console_init() is called
- * to make sure the serial console will be available for use. IA-64 kernel
- * calls this function from setup_arch() after the EFI and ACPI tables have
- * been parsed.
- */
-int __init hp300_setup_serial_console(void)
-{
- int scode;
- struct uart_port port;
-
- memset(&port, 0, sizeof(port));
-
- if (hp300_uart_scode < 0 || hp300_uart_scode > DIO_SCMAX)
- return 0;
-
- if (DIO_SCINHOLE(hp300_uart_scode))
- return 0;
-
- scode = hp300_uart_scode;
-
- /* Memory mapped I/O */
- port.iotype = UPIO_MEM;
- port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
- port.type = PORT_UNKNOWN;
-
- /* Check for APCI console */
- if (scode == 256) {
-#ifdef CONFIG_HPAPCI
- printk(KERN_INFO "Serial console is HP APCI 1\n");
-
- port.uartclk = HPAPCI_BAUD_BASE * 16;
- port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1));
- port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
- port.regshift = 2;
- add_preferred_console("ttyS", port.line, "9600n8");
-#else
- printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n");
- return 0;
-#endif
- } else {
-#ifdef CONFIG_HPDCA
- unsigned long pa = dio_scodetophysaddr(scode);
- if (!pa)
- return 0;
-
- printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode);
-
- port.uartclk = HPDCA_BAUD_BASE * 16;
- port.mapbase = (pa + UART_OFFSET);
- port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
- port.regshift = 1;
- port.irq = DIO_IPL(pa + DIO_VIRADDRBASE);
-
- /* Enable board-interrupts */
- out_8(pa + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE);
-
- if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80)
- add_preferred_console("ttyS", port.line, "9600n8");
-#else
- printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n");
- return 0;
-#endif
- }
-
- if (early_serial_setup(&port) < 0)
- printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n");
- return 0;
-}
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
-
-#ifdef CONFIG_HPDCA
-static int __devinit hpdca_init_one(struct dio_dev *d,
- const struct dio_device_id *ent)
-{
- struct uart_port port;
- int line;
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- if (hp300_uart_scode == d->scode) {
- /* Already got it. */
- return 0;
- }
-#endif
- memset(&port, 0, sizeof(struct uart_port));
-
- /* Memory mapped I/O */
- port.iotype = UPIO_MEM;
- port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
- port.irq = d->ipl;
- port.uartclk = HPDCA_BAUD_BASE * 16;
- port.mapbase = (d->resource.start + UART_OFFSET);
- port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
- port.regshift = 1;
- port.dev = &d->dev;
- line = serial8250_register_port(&port);
-
- if (line < 0) {
- printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
- " irq %d failed\n", d->scode, port.irq);
- return -ENOMEM;
- }
-
- /* Enable board-interrupts */
- out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE);
- dio_set_drvdata(d, (void *)line);
-
- /* Reset the DCA */
- out_8(d->resource.start + DIO_VIRADDRBASE + DCA_ID, 0xff);
- udelay(100);
-
- num_ports++;
-
- return 0;
-}
-#endif
-
-static int __init hp300_8250_init(void)
-{
- static int called;
-#ifdef CONFIG_HPAPCI
- int line;
- unsigned long base;
- struct uart_port uport;
- struct hp300_port *port;
- int i;
-#endif
- if (called)
- return -ENODEV;
- called = 1;
-
- if (!MACH_IS_HP300)
- return -ENODEV;
-
-#ifdef CONFIG_HPDCA
- dio_register_driver(&hpdca_driver);
-#endif
-#ifdef CONFIG_HPAPCI
- if (hp300_model < HP_400) {
- if (!num_ports)
- return -ENODEV;
- return 0;
- }
- /* These models have the Frodo chip.
- * Port 0 is reserved for the Apollo Domain keyboard.
- * Port 1 is either the console or the DCA.
- */
- for (i = 1; i < 4; i++) {
- /* Port 1 is the console on a 425e, on other machines it's
- * mapped to DCA.
- */
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- if (i == 1)
- continue;
-#endif
-
- /* Create new serial device */
- port = kmalloc(sizeof(struct hp300_port), GFP_KERNEL);
- if (!port)
- return -ENOMEM;
-
- memset(&uport, 0, sizeof(struct uart_port));
-
- base = (FRODO_BASE + FRODO_APCI_OFFSET(i));
-
- /* Memory mapped I/O */
- uport.iotype = UPIO_MEM;
- uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \
- | UPF_BOOT_AUTOCONF;
- /* XXX - no interrupt support yet */
- uport.irq = 0;
- uport.uartclk = HPAPCI_BAUD_BASE * 16;
- uport.mapbase = base;
- uport.membase = (char *)(base + DIO_VIRADDRBASE);
- uport.regshift = 2;
-
- line = serial8250_register_port(&uport);
-
- if (line < 0) {
- printk(KERN_NOTICE "8250_hp300: register_serial() APCI"
- " %d irq %d failed\n", i, uport.irq);
- kfree(port);
- continue;
- }
-
- port->line = line;
- port->next = hp300_ports;
- hp300_ports = port;
-
- num_ports++;
- }
-#endif
-
- /* Any boards found? */
- if (!num_ports)
- return -ENODEV;
-
- return 0;
-}
-
-#ifdef CONFIG_HPDCA
-static void __devexit hpdca_remove_one(struct dio_dev *d)
-{
- int line;
-
- line = (int) dio_get_drvdata(d);
- if (d->resource.start) {
- /* Disable board-interrupts */
- out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, 0);
- }
- serial8250_unregister_port(line);
-}
-#endif
-
-static void __exit hp300_8250_exit(void)
-{
-#ifdef CONFIG_HPAPCI
- struct hp300_port *port, *to_free;
-
- for (port = hp300_ports; port; ) {
- serial8250_unregister_port(port->line);
- to_free = port;
- port = port->next;
- kfree(to_free);
- }
-
- hp300_ports = NULL;
-#endif
-#ifdef CONFIG_HPDCA
- dio_unregister_driver(&hpdca_driver);
-#endif
-}
-
-module_init(hp300_8250_init);
-module_exit(hp300_8250_exit);
-MODULE_DESCRIPTION("HP DCA/APCI serial driver");
-MODULE_AUTHOR("Kars de Jong <jongk@linux-m68k.org>");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Copyright (C) 2005 Russell King.
- * Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-
-#define HUB6(card,port) \
- { \
- .iobase = 0x302, \
- .irq = 3, \
- .uartclk = 1843200, \
- .iotype = UPIO_HUB6, \
- .flags = UPF_BOOT_AUTOCONF, \
- .hub6 = (card) << 6 | (port) << 3 | 1, \
- }
-
-static struct plat_serial8250_port hub6_data[] = {
- HUB6(0, 0),
- HUB6(0, 1),
- HUB6(0, 2),
- HUB6(0, 3),
- HUB6(0, 4),
- HUB6(0, 5),
- HUB6(1, 0),
- HUB6(1, 1),
- HUB6(1, 2),
- HUB6(1, 3),
- HUB6(1, 4),
- HUB6(1, 5),
- { },
-};
-
-static struct platform_device hub6_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_HUB6,
- .dev = {
- .platform_data = hub6_data,
- },
-};
-
-static int __init hub6_init(void)
-{
- return platform_device_register(&hub6_device);
-}
-
-module_init(hub6_init);
-
-MODULE_AUTHOR("Russell King");
-MODULE_DESCRIPTION("8250 serial probe module for Hub6 cards");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Copyright (C) 2005 Russell King.
- * Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mca.h>
-#include <linux/serial_8250.h>
-
-/*
- * FIXME: Should we be doing AUTO_IRQ here?
- */
-#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define MCA_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ
-#else
-#define MCA_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST
-#endif
-
-#define PORT(_base,_irq) \
- { \
- .iobase = _base, \
- .irq = _irq, \
- .uartclk = 1843200, \
- .iotype = UPIO_PORT, \
- .flags = MCA_FLAGS, \
- }
-
-static struct plat_serial8250_port mca_data[] = {
- PORT(0x3220, 3),
- PORT(0x3228, 3),
- PORT(0x4220, 3),
- PORT(0x4228, 3),
- PORT(0x5220, 3),
- PORT(0x5228, 3),
- { },
-};
-
-static struct platform_device mca_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_MCA,
- .dev = {
- .platform_data = mca_data,
- },
-};
-
-static int __init mca_init(void)
-{
- if (!MCA_bus)
- return -ENODEV;
- return platform_device_register(&mca_device);
-}
-
-module_init(mca_init);
-
-MODULE_AUTHOR("Russell King");
-MODULE_DESCRIPTION("8250 serial probe module for MCA ports");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Probe module for 8250/16550-type PCI serial ports.
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *
- * Copyright (C) 2001 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/8250_pci.h>
-#include <linux/bitops.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-
-#include "8250.h"
-
-#undef SERIAL_DEBUG_PCI
-
-/*
- * init function returns:
- * > 0 - number of ports
- * = 0 - use board->num_ports
- * < 0 - error
- */
-struct pci_serial_quirk {
- u32 vendor;
- u32 device;
- u32 subvendor;
- u32 subdevice;
- int (*probe)(struct pci_dev *dev);
- int (*init)(struct pci_dev *dev);
- int (*setup)(struct serial_private *,
- const struct pciserial_board *,
- struct uart_port *, int);
- void (*exit)(struct pci_dev *dev);
-};
-
-#define PCI_NUM_BAR_RESOURCES 6
-
-struct serial_private {
- struct pci_dev *dev;
- unsigned int nr;
- void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES];
- struct pci_serial_quirk *quirk;
- int line[0];
-};
-
-static int pci_default_setup(struct serial_private*,
- const struct pciserial_board*, struct uart_port*, int);
-
-static void moan_device(const char *str, struct pci_dev *dev)
-{
- printk(KERN_WARNING
- "%s: %s\n"
- "Please send the output of lspci -vv, this\n"
- "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
- "manufacturer and name of serial board or\n"
- "modem board to rmk+serial@arm.linux.org.uk.\n",
- pci_name(dev), str, dev->vendor, dev->device,
- dev->subsystem_vendor, dev->subsystem_device);
-}
-
-static int
-setup_port(struct serial_private *priv, struct uart_port *port,
- int bar, int offset, int regshift)
-{
- struct pci_dev *dev = priv->dev;
- unsigned long base, len;
-
- if (bar >= PCI_NUM_BAR_RESOURCES)
- return -EINVAL;
-
- base = pci_resource_start(dev, bar);
-
- if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
- len = pci_resource_len(dev, bar);
-
- if (!priv->remapped_bar[bar])
- priv->remapped_bar[bar] = ioremap_nocache(base, len);
- if (!priv->remapped_bar[bar])
- return -ENOMEM;
-
- port->iotype = UPIO_MEM;
- port->iobase = 0;
- port->mapbase = base + offset;
- port->membase = priv->remapped_bar[bar] + offset;
- port->regshift = regshift;
- } else {
- port->iotype = UPIO_PORT;
- port->iobase = base + offset;
- port->mapbase = 0;
- port->membase = NULL;
- port->regshift = 0;
- }
- return 0;
-}
-
-/*
- * ADDI-DATA GmbH communication cards <info@addi-data.com>
- */
-static int addidata_apci7800_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_port *port, int idx)
-{
- unsigned int bar = 0, offset = board->first_offset;
- bar = FL_GET_BASE(board->flags);
-
- if (idx < 2) {
- offset += idx * board->uart_offset;
- } else if ((idx >= 2) && (idx < 4)) {
- bar += 1;
- offset += ((idx - 2) * board->uart_offset);
- } else if ((idx >= 4) && (idx < 6)) {
- bar += 2;
- offset += ((idx - 4) * board->uart_offset);
- } else if (idx >= 6) {
- bar += 3;
- offset += ((idx - 6) * board->uart_offset);
- }
-
- return setup_port(priv, port, bar, offset, board->reg_shift);
-}
-
-/*
- * AFAVLAB uses a different mixture of BARs and offsets
- * Not that ugly ;) -- HW
- */
-static int
-afavlab_setup(struct serial_private *priv, const struct pciserial_board *board,
- struct uart_port *port, int idx)
-{
- unsigned int bar, offset = board->first_offset;
-
- bar = FL_GET_BASE(board->flags);
- if (idx < 4)
- bar += idx;
- else {
- bar = 4;
- offset += (idx - 4) * board->uart_offset;
- }
-
- return setup_port(priv, port, bar, offset, board->reg_shift);
-}
-
-/*
- * HP's Remote Management Console. The Diva chip came in several
- * different versions. N-class, L2000 and A500 have two Diva chips, each
- * with 3 UARTs (the third UART on the second chip is unused). Superdome
- * and Keystone have one Diva chip with 3 UARTs. Some later machines have
- * one Diva chip, but it has been expanded to 5 UARTs.
- */
-static int pci_hp_diva_init(struct pci_dev *dev)
-{
- int rc = 0;
-
- switch (dev->subsystem_device) {
- case PCI_DEVICE_ID_HP_DIVA_TOSCA1:
- case PCI_DEVICE_ID_HP_DIVA_HALFDOME:
- case PCI_DEVICE_ID_HP_DIVA_KEYSTONE:
- case PCI_DEVICE_ID_HP_DIVA_EVEREST:
- rc = 3;
- break;
- case PCI_DEVICE_ID_HP_DIVA_TOSCA2:
- rc = 2;
- break;
- case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
- rc = 4;
- break;
- case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
- case PCI_DEVICE_ID_HP_DIVA_HURRICANE:
- rc = 1;
- break;
- }
-
- return rc;
-}
-
-/*
- * HP's Diva chip puts the 4th/5th serial port further out, and
- * some serial ports are supposed to be hidden on certain models.
- */
-static int
-pci_hp_diva_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_port *port, int idx)
-{
- unsigned int offset = board->first_offset;
- unsigned int bar = FL_GET_BASE(board->flags);
-
- switch (priv->dev->subsystem_device) {
- case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
- if (idx == 3)
- idx++;
- break;
- case PCI_DEVICE_ID_HP_DIVA_EVEREST:
- if (idx > 0)
- idx++;
- if (idx > 2)
- idx++;
- break;
- }
- if (idx > 2)
- offset = 0x18;
-
- offset += idx * board->uart_offset;
-
- return setup_port(priv, port, bar, offset, board->reg_shift);
-}
-
-/*
- * Added for EKF Intel i960 serial boards
- */
-static int pci_inteli960ni_init(struct pci_dev *dev)
-{
- unsigned long oldval;
-
- if (!(dev->subsystem_device & 0x1000))
- return -ENODEV;
-
- /* is firmware started? */
- pci_read_config_dword(dev, 0x44, (void *)&oldval);
- if (oldval == 0x00001000L) { /* RESET value */
- printk(KERN_DEBUG "Local i960 firmware missing");
- return -ENODEV;
- }
- return 0;
-}
-
-/*
- * Some PCI serial cards using the PLX 9050 PCI interface chip require
- * that the card interrupt be explicitly enabled or disabled. This
- * seems to be mainly needed on card using the PLX which also use I/O
- * mapped memory.
- */
-static int pci_plx9050_init(struct pci_dev *dev)
-{
- u8 irq_config;
- void __iomem *p;
-
- if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) {
- moan_device("no memory in bar 0", dev);
- return 0;
- }
-
- irq_config = 0x41;
- if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
- dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS)
- irq_config = 0x43;
-
- if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
- (dev->device == PCI_DEVICE_ID_PLX_ROMULUS))
- /*
- * As the megawolf cards have the int pins active
- * high, and have 2 UART chips, both ints must be
- * enabled on the 9050. Also, the UARTS are set in
- * 16450 mode by default, so we have to enable the
- * 16C950 'enhanced' mode so that we can use the
- * deep FIFOs
- */
- irq_config = 0x5b;
- /*
- * enable/disable interrupts
- */
- p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
- if (p == NULL)
- return -ENOMEM;
- writel(irq_config, p + 0x4c);
-
- /*
- * Read the register back to ensure that it took effect.
- */
- readl(p + 0x4c);
- iounmap(p);
-
- return 0;
-}
-
-static void __devexit pci_plx9050_exit(struct pci_dev *dev)
-{
- u8 __iomem *p;
-
- if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0)
- return;
-
- /*
- * disable interrupts
- */
- p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
- if (p != NULL) {
- writel(0, p + 0x4c);
-
- /*
- * Read the register back to ensure that it took effect.
- */
- readl(p + 0x4c);
- iounmap(p);
- }
-}
-
-#define NI8420_INT_ENABLE_REG 0x38
-#define NI8420_INT_ENABLE_BIT 0x2000
-
-static void __devexit pci_ni8420_exit(struct pci_dev *dev)
-{
- void __iomem *p;
- unsigned long base, len;
- unsigned int bar = 0;
-
- if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
- moan_device("no memory in bar", dev);
- return;
- }
-
- base = pci_resource_start(dev, bar);
- len = pci_resource_len(dev, bar);
- p = ioremap_nocache(base, len);
- if (p == NULL)
- return;
-
- /* Disable the CPU Interrupt */
- writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT),
- p + NI8420_INT_ENABLE_REG);
- iounmap(p);
-}
-
-
-/* MITE registers */
-#define MITE_IOWBSR1 0xc4
-#define MITE_IOWCR1 0xf4
-#define MITE_LCIMR1 0x08
-#define MITE_LCIMR2 0x10
-
-#define MITE_LCIMR2_CLR_CPU_IE (1 << 30)
-
-static void __devexit pci_ni8430_exit(struct pci_dev *dev)
-{
- void __iomem *p;
- unsigned long base, len;
- unsigned int bar = 0;
-
- if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
- moan_device("no memory in bar", dev);
- return;
- }
-
- base = pci_resource_start(dev, bar);
- len = pci_resource_len(dev, bar);
- p = ioremap_nocache(base, len);
- if (p == NULL)
- return;
-
- /* Disable the CPU Interrupt */
- writel(MITE_LCIMR2_CLR_CPU_IE, p + MITE_LCIMR2);
- iounmap(p);
-}
-
-/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
-static int
-sbs_setup(struct serial_private *priv, const struct pciserial_board *board,
- struct uart_port *port, int idx)
-{
- unsigned int bar, offset = board->first_offset;
-
- bar = 0;
-
- if (idx < 4) {
- /* first four channels map to 0, 0x100, 0x200, 0x300 */
- offset += idx * board->uart_offset;
- } else if (idx < 8) {
- /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */
- offset += idx * board->uart_offset + 0xC00;
- } else /* we have only 8 ports on PMC-OCTALPRO */
- return 1;
-
- return setup_port(priv, port, bar, offset, board->reg_shift);
-}
-
-/*
-* This does initialization for PMC OCTALPRO cards:
-* maps the device memory, resets the UARTs (needed, bc
-* if the module is removed and inserted again, the card
-* is in the sleep mode) and enables global interrupt.
-*/
-
-/* global control register offset for SBS PMC-OctalPro */
-#define OCT_REG_CR_OFF 0x500
-
-static int sbs_init(struct pci_dev *dev)
-{
- u8 __iomem *p;
-
- p = pci_ioremap_bar(dev, 0);
-
- if (p == NULL)
- return -ENOMEM;
- /* Set bit-4 Control Register (UART RESET) in to reset the uarts */
- writeb(0x10, p + OCT_REG_CR_OFF);
- udelay(50);
- writeb(0x0, p + OCT_REG_CR_OFF);
-
- /* Set bit-2 (INTENABLE) of Control Register */
- writeb(0x4, p + OCT_REG_CR_OFF);
- iounmap(p);
-
- return 0;
-}
-
-/*
- * Disables the global interrupt of PMC-OctalPro
- */
-
-static void __devexit sbs_exit(struct pci_dev *dev)
-{
- u8 __iomem *p;
-
- p = pci_ioremap_bar(dev, 0);
- /* FIXME: What if resource_len < OCT_REG_CR_OFF */
- if (p != NULL)
- writeb(0, p + OCT_REG_CR_OFF);
- iounmap(p);
-}
-
-/*
- * SIIG serial cards have an PCI interface chip which also controls
- * the UART clocking frequency. Each UART can be clocked independently
- * (except cards equipped with 4 UARTs) and initial clocking settings
- * are stored in the EEPROM chip. It can cause problems because this
- * version of serial driver doesn't support differently clocked UART's
- * on single PCI card. To prevent this, initialization functions set
- * high frequency clocking for all UART's on given card. It is safe (I
- * hope) because it doesn't touch EEPROM settings to prevent conflicts
- * with other OSes (like M$ DOS).
- *
- * SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
- *
- * There is two family of SIIG serial cards with different PCI
- * interface chip and different configuration methods:
- * - 10x cards have control registers in IO and/or memory space;
- * - 20x cards have control registers in standard PCI configuration space.
- *
- * Note: all 10x cards have PCI device ids 0x10..
- * all 20x cards have PCI device ids 0x20..
- *
- * There are also Quartet Serial cards which use Oxford Semiconductor
- * 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
- *
- * Note: some SIIG cards are probed by the parport_serial object.
- */
-
-#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
-#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
-
-static int pci_siig10x_init(struct pci_dev *dev)
-{
- u16 data;
- void __iomem *p;
-
- switch (dev->device & 0xfff8) {
- case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */
- data = 0xffdf;
- break;
- case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */
- data = 0xf7ff;
- break;
- default: /* 1S1P, 4S */
- data = 0xfffb;
- break;
- }
-
- p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
- if (p == NULL)
- return -ENOMEM;
-
- writew(readw(p + 0x28) & data, p + 0x28);
- readw(p + 0x28);
- iounmap(p);
- return 0;
-}
-
-#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
-#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
-
-static int pci_siig20x_init(struct pci_dev *dev)
-{
- u8 data;
-
- /* Change clock frequency for the first UART. */
- pci_read_config_byte(dev, 0x6f, &data);
- pci_write_config_byte(dev, 0x6f, data & 0xef);
-
- /* If this card has 2 UART, we have to do the same with second UART. */
- if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
- ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
- pci_read_config_byte(dev, 0x73, &data);
- pci_write_config_byte(dev, 0x73, data & 0xef);
- }
- return 0;
-}
-
-static int pci_siig_init(struct pci_dev *dev)
-{
- unsigned int type = dev->device & 0xff00;
-
- if (type == 0x1000)
- return pci_siig10x_init(dev);
- else if (type == 0x2000)
- return pci_siig20x_init(dev);
-
- moan_device("Unknown SIIG card", dev);
- return -ENODEV;
-}
-
-static int pci_siig_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_port *port, int idx)
-{
- unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
-
- if (idx > 3) {
- bar = 4;
- offset = (idx - 4) * 8;
- }
-
- return setup_port(priv, port, bar, offset, 0);
-}
-
-/*
- * Timedia has an explosion of boards, and to avoid the PCI table from
- * growing *huge*, we use this function to collapse some 70 entries
- * in the PCI table into one, for sanity's and compactness's sake.
- */
-static const unsigned short timedia_single_port[] = {
- 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
-};
-
-static const unsigned short timedia_dual_port[] = {
- 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
- 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
- 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
- 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
- 0xD079, 0
-};
-
-static const unsigned short timedia_quad_port[] = {
- 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
- 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
- 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
- 0xB157, 0
-};
-
-static const unsigned short timedia_eight_port[] = {
- 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
- 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
-};
-
-static const struct timedia_struct {
- int num;
- const unsigned short *ids;
-} timedia_data[] = {
- { 1, timedia_single_port },
- { 2, timedia_dual_port },
- { 4, timedia_quad_port },
- { 8, timedia_eight_port }
-};
-
-/*
- * There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of
- * listing them individually, this driver merely grabs them all with
- * PCI_ANY_ID. Some of these devices, however, also feature a parallel port,
- * and should be left free to be claimed by parport_serial instead.
- */
-static int pci_timedia_probe(struct pci_dev *dev)
-{
- /*
- * Check the third digit of the subdevice ID
- * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel)
- */
- if ((dev->subsystem_device & 0x00f0) >= 0x70) {
- dev_info(&dev->dev,
- "ignoring Timedia subdevice %04x for parport_serial\n",
- dev->subsystem_device);
- return -ENODEV;
- }
-
- return 0;
-}
-
-static int pci_timedia_init(struct pci_dev *dev)
-{
- const unsigned short *ids;
- int i, j;
-
- for (i = 0; i < ARRAY_SIZE(timedia_data); i++) {
- ids = timedia_data[i].ids;
- for (j = 0; ids[j]; j++)
- if (dev->subsystem_device == ids[j])
- return timedia_data[i].num;
- }
- return 0;
-}
-
-/*
- * Timedia/SUNIX uses a mixture of BARs and offsets
- * Ugh, this is ugly as all hell --- TYT
- */
-static int
-pci_timedia_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_port *port, int idx)
-{
- unsigned int bar = 0, offset = board->first_offset;
-
- switch (idx) {
- case 0:
- bar = 0;
- break;
- case 1:
- offset = board->uart_offset;
- bar = 0;
- break;
- case 2:
- bar = 1;
- break;
- case 3:
- offset = board->uart_offset;
- /* FALLTHROUGH */
- case 4: /* BAR 2 */
- case 5: /* BAR 3 */
- case 6: /* BAR 4 */
- case 7: /* BAR 5 */
- bar = idx - 2;
- }
-
- return setup_port(priv, port, bar, offset, board->reg_shift);
-}
-
-/*
- * Some Titan cards are also a little weird
- */
-static int
-titan_400l_800l_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_port *port, int idx)
-{
- unsigned int bar, offset = board->first_offset;
-
- switch (idx) {
- case 0:
- bar = 1;
- break;
- case 1:
- bar = 2;
- break;
- default:
- bar = 4;
- offset = (idx - 2) * board->uart_offset;
- }
-
- return setup_port(priv, port, bar, offset, board->reg_shift);
-}
-
-static int pci_xircom_init(struct pci_dev *dev)
-{
- msleep(100);
- return 0;
-}
-
-static int pci_ni8420_init(struct pci_dev *dev)
-{
- void __iomem *p;
- unsigned long base, len;
- unsigned int bar = 0;
-
- if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
- moan_device("no memory in bar", dev);
- return 0;
- }
-
- base = pci_resource_start(dev, bar);
- len = pci_resource_len(dev, bar);
- p = ioremap_nocache(base, len);
- if (p == NULL)
- return -ENOMEM;
-
- /* Enable CPU Interrupt */
- writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT,
- p + NI8420_INT_ENABLE_REG);
-
- iounmap(p);
- return 0;
-}
-
-#define MITE_IOWBSR1_WSIZE 0xa
-#define MITE_IOWBSR1_WIN_OFFSET 0x800
-#define MITE_IOWBSR1_WENAB (1 << 7)
-#define MITE_LCIMR1_IO_IE_0 (1 << 24)
-#define MITE_LCIMR2_SET_CPU_IE (1 << 31)
-#define MITE_IOWCR1_RAMSEL_MASK 0xfffffffe
-
-static int pci_ni8430_init(struct pci_dev *dev)
-{
- void __iomem *p;
- unsigned long base, len;
- u32 device_window;
- unsigned int bar = 0;
-
- if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
- moan_device("no memory in bar", dev);
- return 0;
- }
-
- base = pci_resource_start(dev, bar);
- len = pci_resource_len(dev, bar);
- p = ioremap_nocache(base, len);
- if (p == NULL)
- return -ENOMEM;
-
- /* Set device window address and size in BAR0 */
- device_window = ((base + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00)
- | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
- writel(device_window, p + MITE_IOWBSR1);
-
- /* Set window access to go to RAMSEL IO address space */
- writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK),
- p + MITE_IOWCR1);
-
- /* Enable IO Bus Interrupt 0 */
- writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1);
-
- /* Enable CPU Interrupt */
- writel(MITE_LCIMR2_SET_CPU_IE, p + MITE_LCIMR2);
-
- iounmap(p);
- return 0;
-}
-
-/* UART Port Control Register */
-#define NI8430_PORTCON 0x0f
-#define NI8430_PORTCON_TXVR_ENABLE (1 << 3)
-
-static int
-pci_ni8430_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_port *port, int idx)
-{
- void __iomem *p;
- unsigned long base, len;
- unsigned int bar, offset = board->first_offset;
-
- if (idx >= board->num_ports)
- return 1;
-
- bar = FL_GET_BASE(board->flags);
- offset += idx * board->uart_offset;
-
- base = pci_resource_start(priv->dev, bar);
- len = pci_resource_len(priv->dev, bar);
- p = ioremap_nocache(base, len);
-
- /* enable the transceiver */
- writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE,
- p + offset + NI8430_PORTCON);
-
- iounmap(p);
-
- return setup_port(priv, port, bar, offset, board->reg_shift);
-}
-
-static int pci_netmos_9900_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_port *port, int idx)
-{
- unsigned int bar;
-
- if ((priv->dev->subsystem_device & 0xff00) == 0x3000) {
- /* netmos apparently orders BARs by datasheet layout, so serial
- * ports get BARs 0 and 3 (or 1 and 4 for memmapped)
- */
- bar = 3 * idx;
-
- return setup_port(priv, port, bar, 0, board->reg_shift);
- } else {
- return pci_default_setup(priv, board, port, idx);
- }
-}
-
-/* the 99xx series comes with a range of device IDs and a variety
- * of capabilities:
- *
- * 9900 has varying capabilities and can cascade to sub-controllers
- * (cascading should be purely internal)
- * 9904 is hardwired with 4 serial ports
- * 9912 and 9922 are hardwired with 2 serial ports
- */
-static int pci_netmos_9900_numports(struct pci_dev *dev)
-{
- unsigned int c = dev->class;
- unsigned int pi;
- unsigned short sub_serports;
-
- pi = (c & 0xff);
-
- if (pi == 2) {
- return 1;
- } else if ((pi == 0) &&
- (dev->device == PCI_DEVICE_ID_NETMOS_9900)) {
- /* two possibilities: 0x30ps encodes number of parallel and
- * serial ports, or 0x1000 indicates *something*. This is not
- * immediately obvious, since the 2s1p+4s configuration seems
- * to offer all functionality on functions 0..2, while still
- * advertising the same function 3 as the 4s+2s1p config.
- */
- sub_serports = dev->subsystem_device & 0xf;
- if (sub_serports > 0) {
- return sub_serports;
- } else {
- printk(KERN_NOTICE "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
- return 0;
- }
- }
-
- moan_device("unknown NetMos/Mostech program interface", dev);
- return 0;
-}
-
-static int pci_netmos_init(struct pci_dev *dev)
-{
- /* subdevice 0x00PS means <P> parallel, <S> serial */
- unsigned int num_serial = dev->subsystem_device & 0xf;
-
- if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) ||
- (dev->device == PCI_DEVICE_ID_NETMOS_9865))
- return 0;
-
- if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
- dev->subsystem_device == 0x0299)
- return 0;
-
- switch (dev->device) { /* FALLTHROUGH on all */
- case PCI_DEVICE_ID_NETMOS_9904:
- case PCI_DEVICE_ID_NETMOS_9912:
- case PCI_DEVICE_ID_NETMOS_9922:
- case PCI_DEVICE_ID_NETMOS_9900:
- num_serial = pci_netmos_9900_numports(dev);
- break;
-
- default:
- if (num_serial == 0 ) {
- moan_device("unknown NetMos/Mostech device", dev);
- }
- }
-
- if (num_serial == 0)
- return -ENODEV;
-
- return num_serial;
-}
-
-/*
- * These chips are available with optionally one parallel port and up to
- * two serial ports. Unfortunately they all have the same product id.
- *
- * Basic configuration is done over a region of 32 I/O ports. The base
- * ioport is called INTA or INTC, depending on docs/other drivers.
- *
- * The region of the 32 I/O ports is configured in POSIO0R...
- */
-
-/* registers */
-#define ITE_887x_MISCR 0x9c
-#define ITE_887x_INTCBAR 0x78
-#define ITE_887x_UARTBAR 0x7c
-#define ITE_887x_PS0BAR 0x10
-#define ITE_887x_POSIO0 0x60
-
-/* I/O space size */
-#define ITE_887x_IOSIZE 32
-/* I/O space size (bits 26-24; 8 bytes = 011b) */
-#define ITE_887x_POSIO_IOSIZE_8 (3 << 24)
-/* I/O space size (bits 26-24; 32 bytes = 101b) */
-#define ITE_887x_POSIO_IOSIZE_32 (5 << 24)
-/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */
-#define ITE_887x_POSIO_SPEED (3 << 29)
-/* enable IO_Space bit */
-#define ITE_887x_POSIO_ENABLE (1 << 31)
-
-static int pci_ite887x_init(struct pci_dev *dev)
-{
- /* inta_addr are the configuration addresses of the ITE */
- static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0,
- 0x200, 0x280, 0 };
- int ret, i, type;
- struct resource *iobase = NULL;
- u32 miscr, uartbar, ioport;
-
- /* search for the base-ioport */
- i = 0;
- while (inta_addr[i] && iobase == NULL) {
- iobase = request_region(inta_addr[i], ITE_887x_IOSIZE,
- "ite887x");
- if (iobase != NULL) {
- /* write POSIO0R - speed | size | ioport */
- pci_write_config_dword(dev, ITE_887x_POSIO0,
- ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
- ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]);
- /* write INTCBAR - ioport */
- pci_write_config_dword(dev, ITE_887x_INTCBAR,
- inta_addr[i]);
- ret = inb(inta_addr[i]);
- if (ret != 0xff) {
- /* ioport connected */
- break;
- }
- release_region(iobase->start, ITE_887x_IOSIZE);
- iobase = NULL;
- }
- i++;
- }
-
- if (!inta_addr[i]) {
- printk(KERN_ERR "ite887x: could not find iobase\n");
- return -ENODEV;
- }
-
- /* start of undocumented type checking (see parport_pc.c) */
- type = inb(iobase->start + 0x18) & 0x0f;
-
- switch (type) {
- case 0x2: /* ITE8871 (1P) */
- case 0xa: /* ITE8875 (1P) */
- ret = 0;
- break;
- case 0xe: /* ITE8872 (2S1P) */
- ret = 2;
- break;
- case 0x6: /* ITE8873 (1S) */
- ret = 1;
- break;
- case 0x8: /* ITE8874 (2S) */
- ret = 2;
- break;
- default:
- moan_device("Unknown ITE887x", dev);
- ret = -ENODEV;
- }
-
- /* configure all serial ports */
- for (i = 0; i < ret; i++) {
- /* read the I/O port from the device */
- pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)),
- &ioport);
- ioport &= 0x0000FF00; /* the actual base address */
- pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)),
- ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
- ITE_887x_POSIO_IOSIZE_8 | ioport);
-
- /* write the ioport to the UARTBAR */
- pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar);
- uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */
- uartbar |= (ioport << (16 * i)); /* set the ioport */
- pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar);
-
- /* get current config */
- pci_read_config_dword(dev, ITE_887x_MISCR, &miscr);
- /* disable interrupts (UARTx_Routing[3:0]) */
- miscr &= ~(0xf << (12 - 4 * i));
- /* activate the UART (UARTx_En) */
- miscr |= 1 << (23 - i);
- /* write new config with activated UART */
- pci_write_config_dword(dev, ITE_887x_MISCR, miscr);
- }
-
- if (ret <= 0) {
- /* the device has no UARTs if we get here */
- release_region(iobase->start, ITE_887x_IOSIZE);
- }
-
- return ret;
-}
-
-static void __devexit pci_ite887x_exit(struct pci_dev *dev)
-{
- u32 ioport;
- /* the ioport is bit 0-15 in POSIO0R */
- pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport);
- ioport &= 0xffff;
- release_region(ioport, ITE_887x_IOSIZE);
-}
-
-/*
- * Oxford Semiconductor Inc.
- * Check that device is part of the Tornado range of devices, then determine
- * the number of ports available on the device.
- */
-static int pci_oxsemi_tornado_init(struct pci_dev *dev)
-{
- u8 __iomem *p;
- unsigned long deviceID;
- unsigned int number_uarts = 0;
-
- /* OxSemi Tornado devices are all 0xCxxx */
- if (dev->vendor == PCI_VENDOR_ID_OXSEMI &&
- (dev->device & 0xF000) != 0xC000)
- return 0;
-
- p = pci_iomap(dev, 0, 5);
- if (p == NULL)
- return -ENOMEM;
-
- deviceID = ioread32(p);
- /* Tornado device */
- if (deviceID == 0x07000200) {
- number_uarts = ioread8(p + 4);
- printk(KERN_DEBUG
- "%d ports detected on Oxford PCI Express device\n",
- number_uarts);
- }
- pci_iounmap(dev, p);
- return number_uarts;
-}
-
-static int
-pci_default_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_port *port, int idx)
-{
- unsigned int bar, offset = board->first_offset, maxnr;
-
- bar = FL_GET_BASE(board->flags);
- if (board->flags & FL_BASE_BARS)
- bar += idx;
- else
- offset += idx * board->uart_offset;
-
- maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
- (board->reg_shift + 3);
-
- if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
- return 1;
-
- return setup_port(priv, port, bar, offset, board->reg_shift);
-}
-
-static int
-ce4100_serial_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_port *port, int idx)
-{
- int ret;
-
- ret = setup_port(priv, port, 0, 0, board->reg_shift);
- port->iotype = UPIO_MEM32;
- port->type = PORT_XSCALE;
- port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
- port->regshift = 2;
-
- return ret;
-}
-
-static int
-pci_omegapci_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_port *port, int idx)
-{
- return setup_port(priv, port, 2, idx * 8, 0);
-}
-
-static int skip_tx_en_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_port *port, int idx)
-{
- port->flags |= UPF_NO_TXEN_TEST;
- printk(KERN_DEBUG "serial8250: skipping TxEn test for device "
- "[%04x:%04x] subsystem [%04x:%04x]\n",
- priv->dev->vendor,
- priv->dev->device,
- priv->dev->subsystem_vendor,
- priv->dev->subsystem_device);
-
- return pci_default_setup(priv, board, port, idx);
-}
-
-static int kt_serial_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_port *port, int idx)
-{
- port->flags |= UPF_IIR_ONCE;
- return skip_tx_en_setup(priv, board, port, idx);
-}
-
-static int pci_eg20t_init(struct pci_dev *dev)
-{
-#if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE)
- return -ENODEV;
-#else
- return 0;
-#endif
-}
-
-static int
-pci_xr17c154_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_port *port, int idx)
-{
- port->flags |= UPF_EXAR_EFR;
- return pci_default_setup(priv, board, port, idx);
-}
-
-static int try_enable_msi(struct pci_dev *dev)
-{
- /* use msi if available, but fallback to legacy otherwise */
- pci_enable_msi(dev);
- return 0;
-}
-
-static void disable_msi(struct pci_dev *dev)
-{
- pci_disable_msi(dev);
-}
-
-#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
-#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
-#define PCI_DEVICE_ID_OCTPRO 0x0001
-#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108
-#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208
-#define PCI_SUBDEVICE_ID_POCTAL232 0x0308
-#define PCI_SUBDEVICE_ID_POCTAL422 0x0408
-#define PCI_VENDOR_ID_ADVANTECH 0x13fe
-#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
-#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620
-#define PCI_DEVICE_ID_TITAN_200I 0x8028
-#define PCI_DEVICE_ID_TITAN_400I 0x8048
-#define PCI_DEVICE_ID_TITAN_800I 0x8088
-#define PCI_DEVICE_ID_TITAN_800EH 0xA007
-#define PCI_DEVICE_ID_TITAN_800EHB 0xA008
-#define PCI_DEVICE_ID_TITAN_400EH 0xA009
-#define PCI_DEVICE_ID_TITAN_100E 0xA010
-#define PCI_DEVICE_ID_TITAN_200E 0xA012
-#define PCI_DEVICE_ID_TITAN_400E 0xA013
-#define PCI_DEVICE_ID_TITAN_800E 0xA014
-#define PCI_DEVICE_ID_TITAN_200EI 0xA016
-#define PCI_DEVICE_ID_TITAN_200EISI 0xA017
-#define PCI_DEVICE_ID_TITAN_400V3 0xA310
-#define PCI_DEVICE_ID_TITAN_410V3 0xA312
-#define PCI_DEVICE_ID_TITAN_800V3 0xA314
-#define PCI_DEVICE_ID_TITAN_800V3B 0xA315
-#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538
-#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6
-#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001
-#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
-
-/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
-#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
-
-/*
- * Master list of serial port init/setup/exit quirks.
- * This does not describe the general nature of the port.
- * (ie, baud base, number and location of ports, etc)
- *
- * This list is ordered alphabetically by vendor then device.
- * Specific entries must come before more generic entries.
- */
-static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
- /*
- * ADDI-DATA GmbH communication cards <info@addi-data.com>
- */
- {
- .vendor = PCI_VENDOR_ID_ADDIDATA_OLD,
- .device = PCI_DEVICE_ID_ADDIDATA_APCI7800,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = addidata_apci7800_setup,
- },
- /*
- * AFAVLAB cards - these may be called via parport_serial
- * It is not clear whether this applies to all products.
- */
- {
- .vendor = PCI_VENDOR_ID_AFAVLAB,
- .device = PCI_ANY_ID,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = afavlab_setup,
- },
- /*
- * HP Diva
- */
- {
- .vendor = PCI_VENDOR_ID_HP,
- .device = PCI_DEVICE_ID_HP_DIVA,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_hp_diva_init,
- .setup = pci_hp_diva_setup,
- },
- /*
- * Intel
- */
- {
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_80960_RP,
- .subvendor = 0xe4bf,
- .subdevice = PCI_ANY_ID,
- .init = pci_inteli960ni_init,
- .setup = pci_default_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_8257X_SOL,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = skip_tx_en_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_82573L_SOL,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = skip_tx_en_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_82573E_SOL,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = skip_tx_en_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_CE4100_UART,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = ce4100_serial_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = try_enable_msi,
- .setup = kt_serial_setup,
- .exit = disable_msi,
- },
- /*
- * ITE
- */
- {
- .vendor = PCI_VENDOR_ID_ITE,
- .device = PCI_DEVICE_ID_ITE_8872,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ite887x_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_ite887x_exit),
- },
- /*
- * National Instruments
- */
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PCI23216,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8420_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PCI2328,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8420_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PCI2324,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8420_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PCI2322,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8420_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PCI2324I,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8420_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PCI2322I,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8420_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8420_23216,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8420_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8420_2328,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8420_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8420_2324,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8420_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8420_2322,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8420_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8422_2324,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8420_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8422_2322,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8420_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_ni8420_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_ANY_ID,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8430_setup,
- .exit = __devexit_p(pci_ni8430_exit),
- },
- /*
- * Panacom
- */
- {
- .vendor = PCI_VENDOR_ID_PANACOM,
- .device = PCI_DEVICE_ID_PANACOM_QUADMODEM,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_plx9050_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_PANACOM,
- .device = PCI_DEVICE_ID_PANACOM_DUALMODEM,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_plx9050_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
- },
- /*
- * PLX
- */
- {
- .vendor = PCI_VENDOR_ID_PLX,
- .device = PCI_DEVICE_ID_PLX_9030,
- .subvendor = PCI_SUBVENDOR_ID_PERLE,
- .subdevice = PCI_ANY_ID,
- .setup = pci_default_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_PLX,
- .device = PCI_DEVICE_ID_PLX_9050,
- .subvendor = PCI_SUBVENDOR_ID_EXSYS,
- .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055,
- .init = pci_plx9050_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_PLX,
- .device = PCI_DEVICE_ID_PLX_9050,
- .subvendor = PCI_SUBVENDOR_ID_KEYSPAN,
- .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2,
- .init = pci_plx9050_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_PLX,
- .device = PCI_DEVICE_ID_PLX_9050,
- .subvendor = PCI_VENDOR_ID_PLX,
- .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
- .init = pci_plx9050_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_PLX,
- .device = PCI_DEVICE_ID_PLX_ROMULUS,
- .subvendor = PCI_VENDOR_ID_PLX,
- .subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
- .init = pci_plx9050_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
- },
- /*
- * SBS Technologies, Inc., PMC-OCTALPRO 232
- */
- {
- .vendor = PCI_VENDOR_ID_SBSMODULARIO,
- .device = PCI_DEVICE_ID_OCTPRO,
- .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
- .subdevice = PCI_SUBDEVICE_ID_OCTPRO232,
- .init = sbs_init,
- .setup = sbs_setup,
- .exit = __devexit_p(sbs_exit),
- },
- /*
- * SBS Technologies, Inc., PMC-OCTALPRO 422
- */
- {
- .vendor = PCI_VENDOR_ID_SBSMODULARIO,
- .device = PCI_DEVICE_ID_OCTPRO,
- .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
- .subdevice = PCI_SUBDEVICE_ID_OCTPRO422,
- .init = sbs_init,
- .setup = sbs_setup,
- .exit = __devexit_p(sbs_exit),
- },
- /*
- * SBS Technologies, Inc., P-Octal 232
- */
- {
- .vendor = PCI_VENDOR_ID_SBSMODULARIO,
- .device = PCI_DEVICE_ID_OCTPRO,
- .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
- .subdevice = PCI_SUBDEVICE_ID_POCTAL232,
- .init = sbs_init,
- .setup = sbs_setup,
- .exit = __devexit_p(sbs_exit),
- },
- /*
- * SBS Technologies, Inc., P-Octal 422
- */
- {
- .vendor = PCI_VENDOR_ID_SBSMODULARIO,
- .device = PCI_DEVICE_ID_OCTPRO,
- .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
- .subdevice = PCI_SUBDEVICE_ID_POCTAL422,
- .init = sbs_init,
- .setup = sbs_setup,
- .exit = __devexit_p(sbs_exit),
- },
- /*
- * SIIG cards - these may be called via parport_serial
- */
- {
- .vendor = PCI_VENDOR_ID_SIIG,
- .device = PCI_ANY_ID,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_siig_init,
- .setup = pci_siig_setup,
- },
- /*
- * Titan cards
- */
- {
- .vendor = PCI_VENDOR_ID_TITAN,
- .device = PCI_DEVICE_ID_TITAN_400L,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = titan_400l_800l_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_TITAN,
- .device = PCI_DEVICE_ID_TITAN_800L,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = titan_400l_800l_setup,
- },
- /*
- * Timedia cards
- */
- {
- .vendor = PCI_VENDOR_ID_TIMEDIA,
- .device = PCI_DEVICE_ID_TIMEDIA_1889,
- .subvendor = PCI_VENDOR_ID_TIMEDIA,
- .subdevice = PCI_ANY_ID,
- .probe = pci_timedia_probe,
- .init = pci_timedia_init,
- .setup = pci_timedia_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_TIMEDIA,
- .device = PCI_ANY_ID,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_timedia_setup,
- },
- /*
- * Exar cards
- */
- {
- .vendor = PCI_VENDOR_ID_EXAR,
- .device = PCI_DEVICE_ID_EXAR_XR17C152,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_xr17c154_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_EXAR,
- .device = PCI_DEVICE_ID_EXAR_XR17C154,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_xr17c154_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_EXAR,
- .device = PCI_DEVICE_ID_EXAR_XR17C158,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_xr17c154_setup,
- },
- /*
- * Xircom cards
- */
- {
- .vendor = PCI_VENDOR_ID_XIRCOM,
- .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_xircom_init,
- .setup = pci_default_setup,
- },
- /*
- * Netmos cards - these may be called via parport_serial
- */
- {
- .vendor = PCI_VENDOR_ID_NETMOS,
- .device = PCI_ANY_ID,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_netmos_init,
- .setup = pci_netmos_9900_setup,
- },
- /*
- * For Oxford Semiconductor Tornado based devices
- */
- {
- .vendor = PCI_VENDOR_ID_OXSEMI,
- .device = PCI_ANY_ID,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_oxsemi_tornado_init,
- .setup = pci_default_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_MAINPINE,
- .device = PCI_ANY_ID,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_oxsemi_tornado_init,
- .setup = pci_default_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_DIGI,
- .device = PCIE_DEVICE_ID_NEO_2_OX_IBM,
- .subvendor = PCI_SUBVENDOR_ID_IBM,
- .subdevice = PCI_ANY_ID,
- .init = pci_oxsemi_tornado_init,
- .setup = pci_default_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8811,
- .init = pci_eg20t_init,
- .setup = pci_default_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8812,
- .init = pci_eg20t_init,
- .setup = pci_default_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8813,
- .init = pci_eg20t_init,
- .setup = pci_default_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8814,
- .init = pci_eg20t_init,
- .setup = pci_default_setup,
- },
- {
- .vendor = 0x10DB,
- .device = 0x8027,
- .init = pci_eg20t_init,
- .setup = pci_default_setup,
- },
- {
- .vendor = 0x10DB,
- .device = 0x8028,
- .init = pci_eg20t_init,
- .setup = pci_default_setup,
- },
- {
- .vendor = 0x10DB,
- .device = 0x8029,
- .init = pci_eg20t_init,
- .setup = pci_default_setup,
- },
- {
- .vendor = 0x10DB,
- .device = 0x800C,
- .init = pci_eg20t_init,
- .setup = pci_default_setup,
- },
- {
- .vendor = 0x10DB,
- .device = 0x800D,
- .init = pci_eg20t_init,
- .setup = pci_default_setup,
- },
- /*
- * Cronyx Omega PCI (PLX-chip based)
- */
- {
- .vendor = PCI_VENDOR_ID_PLX,
- .device = PCI_DEVICE_ID_PLX_CRONYX_OMEGA,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_omegapci_setup,
- },
- /*
- * Default "match everything" terminator entry
- */
- {
- .vendor = PCI_ANY_ID,
- .device = PCI_ANY_ID,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_default_setup,
- }
-};
-
-static inline int quirk_id_matches(u32 quirk_id, u32 dev_id)
-{
- return quirk_id == PCI_ANY_ID || quirk_id == dev_id;
-}
-
-static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
-{
- struct pci_serial_quirk *quirk;
-
- for (quirk = pci_serial_quirks; ; quirk++)
- if (quirk_id_matches(quirk->vendor, dev->vendor) &&
- quirk_id_matches(quirk->device, dev->device) &&
- quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
- quirk_id_matches(quirk->subdevice, dev->subsystem_device))
- break;
- return quirk;
-}
-
-static inline int get_pci_irq(struct pci_dev *dev,
- const struct pciserial_board *board)
-{
- if (board->flags & FL_NOIRQ)
- return 0;
- else
- return dev->irq;
-}
-
-/*
- * This is the configuration table for all of the PCI serial boards
- * which we support. It is directly indexed by the pci_board_num_t enum
- * value, which is encoded in the pci_device_id PCI probe table's
- * driver_data member.
- *
- * The makeup of these names are:
- * pbn_bn{_bt}_n_baud{_offsetinhex}
- *
- * bn = PCI BAR number
- * bt = Index using PCI BARs
- * n = number of serial ports
- * baud = baud rate
- * offsetinhex = offset for each sequential port (in hex)
- *
- * This table is sorted by (in order): bn, bt, baud, offsetindex, n.
- *
- * Please note: in theory if n = 1, _bt infix should make no difference.
- * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200
- */
-enum pci_board_num_t {
- pbn_default = 0,
-
- pbn_b0_1_115200,
- pbn_b0_2_115200,
- pbn_b0_4_115200,
- pbn_b0_5_115200,
- pbn_b0_8_115200,
-
- pbn_b0_1_921600,
- pbn_b0_2_921600,
- pbn_b0_4_921600,
-
- pbn_b0_2_1130000,
-
- pbn_b0_4_1152000,
-
- pbn_b0_2_1843200,
- pbn_b0_4_1843200,
-
- pbn_b0_2_1843200_200,
- pbn_b0_4_1843200_200,
- pbn_b0_8_1843200_200,
-
- pbn_b0_1_4000000,
-
- pbn_b0_bt_1_115200,
- pbn_b0_bt_2_115200,
- pbn_b0_bt_4_115200,
- pbn_b0_bt_8_115200,
-
- pbn_b0_bt_1_460800,
- pbn_b0_bt_2_460800,
- pbn_b0_bt_4_460800,
-
- pbn_b0_bt_1_921600,
- pbn_b0_bt_2_921600,
- pbn_b0_bt_4_921600,
- pbn_b0_bt_8_921600,
-
- pbn_b1_1_115200,
- pbn_b1_2_115200,
- pbn_b1_4_115200,
- pbn_b1_8_115200,
- pbn_b1_16_115200,
-
- pbn_b1_1_921600,
- pbn_b1_2_921600,
- pbn_b1_4_921600,
- pbn_b1_8_921600,
-
- pbn_b1_2_1250000,
-
- pbn_b1_bt_1_115200,
- pbn_b1_bt_2_115200,
- pbn_b1_bt_4_115200,
-
- pbn_b1_bt_2_921600,
-
- pbn_b1_1_1382400,
- pbn_b1_2_1382400,
- pbn_b1_4_1382400,
- pbn_b1_8_1382400,
-
- pbn_b2_1_115200,
- pbn_b2_2_115200,
- pbn_b2_4_115200,
- pbn_b2_8_115200,
-
- pbn_b2_1_460800,
- pbn_b2_4_460800,
- pbn_b2_8_460800,
- pbn_b2_16_460800,
-
- pbn_b2_1_921600,
- pbn_b2_4_921600,
- pbn_b2_8_921600,
-
- pbn_b2_8_1152000,
-
- pbn_b2_bt_1_115200,
- pbn_b2_bt_2_115200,
- pbn_b2_bt_4_115200,
-
- pbn_b2_bt_2_921600,
- pbn_b2_bt_4_921600,
-
- pbn_b3_2_115200,
- pbn_b3_4_115200,
- pbn_b3_8_115200,
-
- pbn_b4_bt_2_921600,
- pbn_b4_bt_4_921600,
- pbn_b4_bt_8_921600,
-
- /*
- * Board-specific versions.
- */
- pbn_panacom,
- pbn_panacom2,
- pbn_panacom4,
- pbn_exsys_4055,
- pbn_plx_romulus,
- pbn_oxsemi,
- pbn_oxsemi_1_4000000,
- pbn_oxsemi_2_4000000,
- pbn_oxsemi_4_4000000,
- pbn_oxsemi_8_4000000,
- pbn_intel_i960,
- pbn_sgi_ioc3,
- pbn_computone_4,
- pbn_computone_6,
- pbn_computone_8,
- pbn_sbsxrsio,
- pbn_exar_XR17C152,
- pbn_exar_XR17C154,
- pbn_exar_XR17C158,
- pbn_exar_ibm_saturn,
- pbn_pasemi_1682M,
- pbn_ni8430_2,
- pbn_ni8430_4,
- pbn_ni8430_8,
- pbn_ni8430_16,
- pbn_ADDIDATA_PCIe_1_3906250,
- pbn_ADDIDATA_PCIe_2_3906250,
- pbn_ADDIDATA_PCIe_4_3906250,
- pbn_ADDIDATA_PCIe_8_3906250,
- pbn_ce4100_1_115200,
- pbn_omegapci,
- pbn_NETMOS9900_2s_115200,
-};
-
-/*
- * uart_offset - the space between channels
- * reg_shift - describes how the UART registers are mapped
- * to PCI memory by the card.
- * For example IER register on SBS, Inc. PMC-OctPro is located at
- * offset 0x10 from the UART base, while UART_IER is defined as 1
- * in include/linux/serial_reg.h,
- * see first lines of serial_in() and serial_out() in 8250.c
-*/
-
-static struct pciserial_board pci_boards[] __devinitdata = {
- [pbn_default] = {
- .flags = FL_BASE0,
- .num_ports = 1,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b0_1_115200] = {
- .flags = FL_BASE0,
- .num_ports = 1,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b0_2_115200] = {
- .flags = FL_BASE0,
- .num_ports = 2,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b0_4_115200] = {
- .flags = FL_BASE0,
- .num_ports = 4,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b0_5_115200] = {
- .flags = FL_BASE0,
- .num_ports = 5,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b0_8_115200] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b0_1_921600] = {
- .flags = FL_BASE0,
- .num_ports = 1,
- .base_baud = 921600,
- .uart_offset = 8,
- },
- [pbn_b0_2_921600] = {
- .flags = FL_BASE0,
- .num_ports = 2,
- .base_baud = 921600,
- .uart_offset = 8,
- },
- [pbn_b0_4_921600] = {
- .flags = FL_BASE0,
- .num_ports = 4,
- .base_baud = 921600,
- .uart_offset = 8,
- },
-
- [pbn_b0_2_1130000] = {
- .flags = FL_BASE0,
- .num_ports = 2,
- .base_baud = 1130000,
- .uart_offset = 8,
- },
-
- [pbn_b0_4_1152000] = {
- .flags = FL_BASE0,
- .num_ports = 4,
- .base_baud = 1152000,
- .uart_offset = 8,
- },
-
- [pbn_b0_2_1843200] = {
- .flags = FL_BASE0,
- .num_ports = 2,
- .base_baud = 1843200,
- .uart_offset = 8,
- },
- [pbn_b0_4_1843200] = {
- .flags = FL_BASE0,
- .num_ports = 4,
- .base_baud = 1843200,
- .uart_offset = 8,
- },
-
- [pbn_b0_2_1843200_200] = {
- .flags = FL_BASE0,
- .num_ports = 2,
- .base_baud = 1843200,
- .uart_offset = 0x200,
- },
- [pbn_b0_4_1843200_200] = {
- .flags = FL_BASE0,
- .num_ports = 4,
- .base_baud = 1843200,
- .uart_offset = 0x200,
- },
- [pbn_b0_8_1843200_200] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 1843200,
- .uart_offset = 0x200,
- },
- [pbn_b0_1_4000000] = {
- .flags = FL_BASE0,
- .num_ports = 1,
- .base_baud = 4000000,
- .uart_offset = 8,
- },
-
- [pbn_b0_bt_1_115200] = {
- .flags = FL_BASE0|FL_BASE_BARS,
- .num_ports = 1,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b0_bt_2_115200] = {
- .flags = FL_BASE0|FL_BASE_BARS,
- .num_ports = 2,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b0_bt_4_115200] = {
- .flags = FL_BASE0|FL_BASE_BARS,
- .num_ports = 4,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b0_bt_8_115200] = {
- .flags = FL_BASE0|FL_BASE_BARS,
- .num_ports = 8,
- .base_baud = 115200,
- .uart_offset = 8,
- },
-
- [pbn_b0_bt_1_460800] = {
- .flags = FL_BASE0|FL_BASE_BARS,
- .num_ports = 1,
- .base_baud = 460800,
- .uart_offset = 8,
- },
- [pbn_b0_bt_2_460800] = {
- .flags = FL_BASE0|FL_BASE_BARS,
- .num_ports = 2,
- .base_baud = 460800,
- .uart_offset = 8,
- },
- [pbn_b0_bt_4_460800] = {
- .flags = FL_BASE0|FL_BASE_BARS,
- .num_ports = 4,
- .base_baud = 460800,
- .uart_offset = 8,
- },
-
- [pbn_b0_bt_1_921600] = {
- .flags = FL_BASE0|FL_BASE_BARS,
- .num_ports = 1,
- .base_baud = 921600,
- .uart_offset = 8,
- },
- [pbn_b0_bt_2_921600] = {
- .flags = FL_BASE0|FL_BASE_BARS,
- .num_ports = 2,
- .base_baud = 921600,
- .uart_offset = 8,
- },
- [pbn_b0_bt_4_921600] = {
- .flags = FL_BASE0|FL_BASE_BARS,
- .num_ports = 4,
- .base_baud = 921600,
- .uart_offset = 8,
- },
- [pbn_b0_bt_8_921600] = {
- .flags = FL_BASE0|FL_BASE_BARS,
- .num_ports = 8,
- .base_baud = 921600,
- .uart_offset = 8,
- },
-
- [pbn_b1_1_115200] = {
- .flags = FL_BASE1,
- .num_ports = 1,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b1_2_115200] = {
- .flags = FL_BASE1,
- .num_ports = 2,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b1_4_115200] = {
- .flags = FL_BASE1,
- .num_ports = 4,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b1_8_115200] = {
- .flags = FL_BASE1,
- .num_ports = 8,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b1_16_115200] = {
- .flags = FL_BASE1,
- .num_ports = 16,
- .base_baud = 115200,
- .uart_offset = 8,
- },
-
- [pbn_b1_1_921600] = {
- .flags = FL_BASE1,
- .num_ports = 1,
- .base_baud = 921600,
- .uart_offset = 8,
- },
- [pbn_b1_2_921600] = {
- .flags = FL_BASE1,
- .num_ports = 2,
- .base_baud = 921600,
- .uart_offset = 8,
- },
- [pbn_b1_4_921600] = {
- .flags = FL_BASE1,
- .num_ports = 4,
- .base_baud = 921600,
- .uart_offset = 8,
- },
- [pbn_b1_8_921600] = {
- .flags = FL_BASE1,
- .num_ports = 8,
- .base_baud = 921600,
- .uart_offset = 8,
- },
- [pbn_b1_2_1250000] = {
- .flags = FL_BASE1,
- .num_ports = 2,
- .base_baud = 1250000,
- .uart_offset = 8,
- },
-
- [pbn_b1_bt_1_115200] = {
- .flags = FL_BASE1|FL_BASE_BARS,
- .num_ports = 1,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b1_bt_2_115200] = {
- .flags = FL_BASE1|FL_BASE_BARS,
- .num_ports = 2,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b1_bt_4_115200] = {
- .flags = FL_BASE1|FL_BASE_BARS,
- .num_ports = 4,
- .base_baud = 115200,
- .uart_offset = 8,
- },
-
- [pbn_b1_bt_2_921600] = {
- .flags = FL_BASE1|FL_BASE_BARS,
- .num_ports = 2,
- .base_baud = 921600,
- .uart_offset = 8,
- },
-
- [pbn_b1_1_1382400] = {
- .flags = FL_BASE1,
- .num_ports = 1,
- .base_baud = 1382400,
- .uart_offset = 8,
- },
- [pbn_b1_2_1382400] = {
- .flags = FL_BASE1,
- .num_ports = 2,
- .base_baud = 1382400,
- .uart_offset = 8,
- },
- [pbn_b1_4_1382400] = {
- .flags = FL_BASE1,
- .num_ports = 4,
- .base_baud = 1382400,
- .uart_offset = 8,
- },
- [pbn_b1_8_1382400] = {
- .flags = FL_BASE1,
- .num_ports = 8,
- .base_baud = 1382400,
- .uart_offset = 8,
- },
-
- [pbn_b2_1_115200] = {
- .flags = FL_BASE2,
- .num_ports = 1,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b2_2_115200] = {
- .flags = FL_BASE2,
- .num_ports = 2,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b2_4_115200] = {
- .flags = FL_BASE2,
- .num_ports = 4,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b2_8_115200] = {
- .flags = FL_BASE2,
- .num_ports = 8,
- .base_baud = 115200,
- .uart_offset = 8,
- },
-
- [pbn_b2_1_460800] = {
- .flags = FL_BASE2,
- .num_ports = 1,
- .base_baud = 460800,
- .uart_offset = 8,
- },
- [pbn_b2_4_460800] = {
- .flags = FL_BASE2,
- .num_ports = 4,
- .base_baud = 460800,
- .uart_offset = 8,
- },
- [pbn_b2_8_460800] = {
- .flags = FL_BASE2,
- .num_ports = 8,
- .base_baud = 460800,
- .uart_offset = 8,
- },
- [pbn_b2_16_460800] = {
- .flags = FL_BASE2,
- .num_ports = 16,
- .base_baud = 460800,
- .uart_offset = 8,
- },
-
- [pbn_b2_1_921600] = {
- .flags = FL_BASE2,
- .num_ports = 1,
- .base_baud = 921600,
- .uart_offset = 8,
- },
- [pbn_b2_4_921600] = {
- .flags = FL_BASE2,
- .num_ports = 4,
- .base_baud = 921600,
- .uart_offset = 8,
- },
- [pbn_b2_8_921600] = {
- .flags = FL_BASE2,
- .num_ports = 8,
- .base_baud = 921600,
- .uart_offset = 8,
- },
-
- [pbn_b2_8_1152000] = {
- .flags = FL_BASE2,
- .num_ports = 8,
- .base_baud = 1152000,
- .uart_offset = 8,
- },
-
- [pbn_b2_bt_1_115200] = {
- .flags = FL_BASE2|FL_BASE_BARS,
- .num_ports = 1,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b2_bt_2_115200] = {
- .flags = FL_BASE2|FL_BASE_BARS,
- .num_ports = 2,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b2_bt_4_115200] = {
- .flags = FL_BASE2|FL_BASE_BARS,
- .num_ports = 4,
- .base_baud = 115200,
- .uart_offset = 8,
- },
-
- [pbn_b2_bt_2_921600] = {
- .flags = FL_BASE2|FL_BASE_BARS,
- .num_ports = 2,
- .base_baud = 921600,
- .uart_offset = 8,
- },
- [pbn_b2_bt_4_921600] = {
- .flags = FL_BASE2|FL_BASE_BARS,
- .num_ports = 4,
- .base_baud = 921600,
- .uart_offset = 8,
- },
-
- [pbn_b3_2_115200] = {
- .flags = FL_BASE3,
- .num_ports = 2,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b3_4_115200] = {
- .flags = FL_BASE3,
- .num_ports = 4,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_b3_8_115200] = {
- .flags = FL_BASE3,
- .num_ports = 8,
- .base_baud = 115200,
- .uart_offset = 8,
- },
-
- [pbn_b4_bt_2_921600] = {
- .flags = FL_BASE4,
- .num_ports = 2,
- .base_baud = 921600,
- .uart_offset = 8,
- },
- [pbn_b4_bt_4_921600] = {
- .flags = FL_BASE4,
- .num_ports = 4,
- .base_baud = 921600,
- .uart_offset = 8,
- },
- [pbn_b4_bt_8_921600] = {
- .flags = FL_BASE4,
- .num_ports = 8,
- .base_baud = 921600,
- .uart_offset = 8,
- },
-
- /*
- * Entries following this are board-specific.
- */
-
- /*
- * Panacom - IOMEM
- */
- [pbn_panacom] = {
- .flags = FL_BASE2,
- .num_ports = 2,
- .base_baud = 921600,
- .uart_offset = 0x400,
- .reg_shift = 7,
- },
- [pbn_panacom2] = {
- .flags = FL_BASE2|FL_BASE_BARS,
- .num_ports = 2,
- .base_baud = 921600,
- .uart_offset = 0x400,
- .reg_shift = 7,
- },
- [pbn_panacom4] = {
- .flags = FL_BASE2|FL_BASE_BARS,
- .num_ports = 4,
- .base_baud = 921600,
- .uart_offset = 0x400,
- .reg_shift = 7,
- },
-
- [pbn_exsys_4055] = {
- .flags = FL_BASE2,
- .num_ports = 4,
- .base_baud = 115200,
- .uart_offset = 8,
- },
-
- /* I think this entry is broken - the first_offset looks wrong --rmk */
- [pbn_plx_romulus] = {
- .flags = FL_BASE2,
- .num_ports = 4,
- .base_baud = 921600,
- .uart_offset = 8 << 2,
- .reg_shift = 2,
- .first_offset = 0x03,
- },
-
- /*
- * This board uses the size of PCI Base region 0 to
- * signal now many ports are available
- */
- [pbn_oxsemi] = {
- .flags = FL_BASE0|FL_REGION_SZ_CAP,
- .num_ports = 32,
- .base_baud = 115200,
- .uart_offset = 8,
- },
- [pbn_oxsemi_1_4000000] = {
- .flags = FL_BASE0,
- .num_ports = 1,
- .base_baud = 4000000,
- .uart_offset = 0x200,
- .first_offset = 0x1000,
- },
- [pbn_oxsemi_2_4000000] = {
- .flags = FL_BASE0,
- .num_ports = 2,
- .base_baud = 4000000,
- .uart_offset = 0x200,
- .first_offset = 0x1000,
- },
- [pbn_oxsemi_4_4000000] = {
- .flags = FL_BASE0,
- .num_ports = 4,
- .base_baud = 4000000,
- .uart_offset = 0x200,
- .first_offset = 0x1000,
- },
- [pbn_oxsemi_8_4000000] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 4000000,
- .uart_offset = 0x200,
- .first_offset = 0x1000,
- },
-
-
- /*
- * EKF addition for i960 Boards form EKF with serial port.
- * Max 256 ports.
- */
- [pbn_intel_i960] = {
- .flags = FL_BASE0,
- .num_ports = 32,
- .base_baud = 921600,
- .uart_offset = 8 << 2,
- .reg_shift = 2,
- .first_offset = 0x10000,
- },
- [pbn_sgi_ioc3] = {
- .flags = FL_BASE0|FL_NOIRQ,
- .num_ports = 1,
- .base_baud = 458333,
- .uart_offset = 8,
- .reg_shift = 0,
- .first_offset = 0x20178,
- },
-
- /*
- * Computone - uses IOMEM.
- */
- [pbn_computone_4] = {
- .flags = FL_BASE0,
- .num_ports = 4,
- .base_baud = 921600,
- .uart_offset = 0x40,
- .reg_shift = 2,
- .first_offset = 0x200,
- },
- [pbn_computone_6] = {
- .flags = FL_BASE0,
- .num_ports = 6,
- .base_baud = 921600,
- .uart_offset = 0x40,
- .reg_shift = 2,
- .first_offset = 0x200,
- },
- [pbn_computone_8] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 921600,
- .uart_offset = 0x40,
- .reg_shift = 2,
- .first_offset = 0x200,
- },
- [pbn_sbsxrsio] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 460800,
- .uart_offset = 256,
- .reg_shift = 4,
- },
- /*
- * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
- * Only basic 16550A support.
- * XR17C15[24] are not tested, but they should work.
- */
- [pbn_exar_XR17C152] = {
- .flags = FL_BASE0,
- .num_ports = 2,
- .base_baud = 921600,
- .uart_offset = 0x200,
- },
- [pbn_exar_XR17C154] = {
- .flags = FL_BASE0,
- .num_ports = 4,
- .base_baud = 921600,
- .uart_offset = 0x200,
- },
- [pbn_exar_XR17C158] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 921600,
- .uart_offset = 0x200,
- },
- [pbn_exar_ibm_saturn] = {
- .flags = FL_BASE0,
- .num_ports = 1,
- .base_baud = 921600,
- .uart_offset = 0x200,
- },
-
- /*
- * PA Semi PWRficient PA6T-1682M on-chip UART
- */
- [pbn_pasemi_1682M] = {
- .flags = FL_BASE0,
- .num_ports = 1,
- .base_baud = 8333333,
- },
- /*
- * National Instruments 843x
- */
- [pbn_ni8430_16] = {
- .flags = FL_BASE0,
- .num_ports = 16,
- .base_baud = 3686400,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8430_8] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 3686400,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8430_4] = {
- .flags = FL_BASE0,
- .num_ports = 4,
- .base_baud = 3686400,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8430_2] = {
- .flags = FL_BASE0,
- .num_ports = 2,
- .base_baud = 3686400,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- /*
- * ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com>
- */
- [pbn_ADDIDATA_PCIe_1_3906250] = {
- .flags = FL_BASE0,
- .num_ports = 1,
- .base_baud = 3906250,
- .uart_offset = 0x200,
- .first_offset = 0x1000,
- },
- [pbn_ADDIDATA_PCIe_2_3906250] = {
- .flags = FL_BASE0,
- .num_ports = 2,
- .base_baud = 3906250,
- .uart_offset = 0x200,
- .first_offset = 0x1000,
- },
- [pbn_ADDIDATA_PCIe_4_3906250] = {
- .flags = FL_BASE0,
- .num_ports = 4,
- .base_baud = 3906250,
- .uart_offset = 0x200,
- .first_offset = 0x1000,
- },
- [pbn_ADDIDATA_PCIe_8_3906250] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 3906250,
- .uart_offset = 0x200,
- .first_offset = 0x1000,
- },
- [pbn_ce4100_1_115200] = {
- .flags = FL_BASE0,
- .num_ports = 1,
- .base_baud = 921600,
- .reg_shift = 2,
- },
- [pbn_omegapci] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 115200,
- .uart_offset = 0x200,
- },
- [pbn_NETMOS9900_2s_115200] = {
- .flags = FL_BASE0,
- .num_ports = 2,
- .base_baud = 115200,
- },
-};
-
-static const struct pci_device_id softmodem_blacklist[] = {
- { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
- { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */
- { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */
-};
-
-/*
- * Given a complete unknown PCI device, try to use some heuristics to
- * guess what the configuration might be, based on the pitiful PCI
- * serial specs. Returns 0 on success, 1 on failure.
- */
-static int __devinit
-serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
-{
- const struct pci_device_id *blacklist;
- int num_iomem, num_port, first_port = -1, i;
-
- /*
- * If it is not a communications device or the programming
- * interface is greater than 6, give up.
- *
- * (Should we try to make guesses for multiport serial devices
- * later?)
- */
- if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
- ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
- (dev->class & 0xff) > 6)
- return -ENODEV;
-
- /*
- * Do not access blacklisted devices that are known not to
- * feature serial ports.
- */
- for (blacklist = softmodem_blacklist;
- blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist);
- blacklist++) {
- if (dev->vendor == blacklist->vendor &&
- dev->device == blacklist->device)
- return -ENODEV;
- }
-
- num_iomem = num_port = 0;
- for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
- if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
- num_port++;
- if (first_port == -1)
- first_port = i;
- }
- if (pci_resource_flags(dev, i) & IORESOURCE_MEM)
- num_iomem++;
- }
-
- /*
- * If there is 1 or 0 iomem regions, and exactly one port,
- * use it. We guess the number of ports based on the IO
- * region size.
- */
- if (num_iomem <= 1 && num_port == 1) {
- board->flags = first_port;
- board->num_ports = pci_resource_len(dev, first_port) / 8;
- return 0;
- }
-
- /*
- * Now guess if we've got a board which indexes by BARs.
- * Each IO BAR should be 8 bytes, and they should follow
- * consecutively.
- */
- first_port = -1;
- num_port = 0;
- for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
- if (pci_resource_flags(dev, i) & IORESOURCE_IO &&
- pci_resource_len(dev, i) == 8 &&
- (first_port == -1 || (first_port + num_port) == i)) {
- num_port++;
- if (first_port == -1)
- first_port = i;
- }
- }
-
- if (num_port > 1) {
- board->flags = first_port | FL_BASE_BARS;
- board->num_ports = num_port;
- return 0;
- }
-
- return -ENODEV;
-}
-
-static inline int
-serial_pci_matches(const struct pciserial_board *board,
- const struct pciserial_board *guessed)
-{
- return
- board->num_ports == guessed->num_ports &&
- board->base_baud == guessed->base_baud &&
- board->uart_offset == guessed->uart_offset &&
- board->reg_shift == guessed->reg_shift &&
- board->first_offset == guessed->first_offset;
-}
-
-struct serial_private *
-pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
-{
- struct uart_port serial_port;
- struct serial_private *priv;
- struct pci_serial_quirk *quirk;
- int rc, nr_ports, i;
-
- nr_ports = board->num_ports;
-
- /*
- * Find an init and setup quirks.
- */
- quirk = find_quirk(dev);
-
- /*
- * Run the new-style initialization function.
- * The initialization function returns:
- * <0 - error
- * 0 - use board->num_ports
- * >0 - number of ports
- */
- if (quirk->init) {
- rc = quirk->init(dev);
- if (rc < 0) {
- priv = ERR_PTR(rc);
- goto err_out;
- }
- if (rc)
- nr_ports = rc;
- }
-
- priv = kzalloc(sizeof(struct serial_private) +
- sizeof(unsigned int) * nr_ports,
- GFP_KERNEL);
- if (!priv) {
- priv = ERR_PTR(-ENOMEM);
- goto err_deinit;
- }
-
- priv->dev = dev;
- priv->quirk = quirk;
-
- memset(&serial_port, 0, sizeof(struct uart_port));
- serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
- serial_port.uartclk = board->base_baud * 16;
- serial_port.irq = get_pci_irq(dev, board);
- serial_port.dev = &dev->dev;
-
- for (i = 0; i < nr_ports; i++) {
- if (quirk->setup(priv, board, &serial_port, i))
- break;
-
-#ifdef SERIAL_DEBUG_PCI
- printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n",
- serial_port.iobase, serial_port.irq, serial_port.iotype);
-#endif
-
- priv->line[i] = serial8250_register_port(&serial_port);
- if (priv->line[i] < 0) {
- printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
- break;
- }
- }
- priv->nr = i;
- return priv;
-
-err_deinit:
- if (quirk->exit)
- quirk->exit(dev);
-err_out:
- return priv;
-}
-EXPORT_SYMBOL_GPL(pciserial_init_ports);
-
-void pciserial_remove_ports(struct serial_private *priv)
-{
- struct pci_serial_quirk *quirk;
- int i;
-
- for (i = 0; i < priv->nr; i++)
- serial8250_unregister_port(priv->line[i]);
-
- for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
- if (priv->remapped_bar[i])
- iounmap(priv->remapped_bar[i]);
- priv->remapped_bar[i] = NULL;
- }
-
- /*
- * Find the exit quirks.
- */
- quirk = find_quirk(priv->dev);
- if (quirk->exit)
- quirk->exit(priv->dev);
-
- kfree(priv);
-}
-EXPORT_SYMBOL_GPL(pciserial_remove_ports);
-
-void pciserial_suspend_ports(struct serial_private *priv)
-{
- int i;
-
- for (i = 0; i < priv->nr; i++)
- if (priv->line[i] >= 0)
- serial8250_suspend_port(priv->line[i]);
-}
-EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
-
-void pciserial_resume_ports(struct serial_private *priv)
-{
- int i;
-
- /*
- * Ensure that the board is correctly configured.
- */
- if (priv->quirk->init)
- priv->quirk->init(priv->dev);
-
- for (i = 0; i < priv->nr; i++)
- if (priv->line[i] >= 0)
- serial8250_resume_port(priv->line[i]);
-}
-EXPORT_SYMBOL_GPL(pciserial_resume_ports);
-
-/*
- * Probe one serial board. Unfortunately, there is no rhyme nor reason
- * to the arrangement of serial ports on a PCI card.
- */
-static int __devinit
-pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
-{
- struct pci_serial_quirk *quirk;
- struct serial_private *priv;
- const struct pciserial_board *board;
- struct pciserial_board tmp;
- int rc;
-
- quirk = find_quirk(dev);
- if (quirk->probe) {
- rc = quirk->probe(dev);
- if (rc)
- return rc;
- }
-
- if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
- printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
- ent->driver_data);
- return -EINVAL;
- }
-
- board = &pci_boards[ent->driver_data];
-
- rc = pci_enable_device(dev);
- pci_save_state(dev);
- if (rc)
- return rc;
-
- if (ent->driver_data == pbn_default) {
- /*
- * Use a copy of the pci_board entry for this;
- * avoid changing entries in the table.
- */
- memcpy(&tmp, board, sizeof(struct pciserial_board));
- board = &tmp;
-
- /*
- * We matched one of our class entries. Try to
- * determine the parameters of this board.
- */
- rc = serial_pci_guess_board(dev, &tmp);
- if (rc)
- goto disable;
- } else {
- /*
- * We matched an explicit entry. If we are able to
- * detect this boards settings with our heuristic,
- * then we no longer need this entry.
- */
- memcpy(&tmp, &pci_boards[pbn_default],
- sizeof(struct pciserial_board));
- rc = serial_pci_guess_board(dev, &tmp);
- if (rc == 0 && serial_pci_matches(board, &tmp))
- moan_device("Redundant entry in serial pci_table.",
- dev);
- }
-
- priv = pciserial_init_ports(dev, board);
- if (!IS_ERR(priv)) {
- pci_set_drvdata(dev, priv);
- return 0;
- }
-
- rc = PTR_ERR(priv);
-
- disable:
- pci_disable_device(dev);
- return rc;
-}
-
-static void __devexit pciserial_remove_one(struct pci_dev *dev)
-{
- struct serial_private *priv = pci_get_drvdata(dev);
-
- pci_set_drvdata(dev, NULL);
-
- pciserial_remove_ports(priv);
-
- pci_disable_device(dev);
-}
-
-#ifdef CONFIG_PM
-static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
-{
- struct serial_private *priv = pci_get_drvdata(dev);
-
- if (priv)
- pciserial_suspend_ports(priv);
-
- pci_save_state(dev);
- pci_set_power_state(dev, pci_choose_state(dev, state));
- return 0;
-}
-
-static int pciserial_resume_one(struct pci_dev *dev)
-{
- int err;
- struct serial_private *priv = pci_get_drvdata(dev);
-
- pci_set_power_state(dev, PCI_D0);
- pci_restore_state(dev);
-
- if (priv) {
- /*
- * The device may have been disabled. Re-enable it.
- */
- err = pci_enable_device(dev);
- /* FIXME: We cannot simply error out here */
- if (err)
- printk(KERN_ERR "pciserial: Unable to re-enable ports, trying to continue.\n");
- pciserial_resume_ports(priv);
- }
- return 0;
-}
-#endif
-
-static struct pci_device_id serial_pci_tbl[] = {
- /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */
- { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
- PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0,
- pbn_b2_8_921600 },
- { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
- pbn_b1_8_1382400 },
- { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
- pbn_b1_4_1382400 },
- { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
- pbn_b1_2_1382400 },
- { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
- pbn_b1_8_1382400 },
- { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
- pbn_b1_4_1382400 },
- { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
- pbn_b1_2_1382400 },
- { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0,
- pbn_b1_8_921600 },
- { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0,
- pbn_b1_8_921600 },
- { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0,
- pbn_b1_4_921600 },
- { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0,
- pbn_b1_4_921600 },
- { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0,
- pbn_b1_2_921600 },
- { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0,
- pbn_b1_8_921600 },
- { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0,
- pbn_b1_8_921600 },
- { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0,
- pbn_b1_4_921600 },
- { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0,
- pbn_b1_2_1250000 },
- { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0,
- pbn_b0_2_1843200 },
- { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0,
- pbn_b0_4_1843200 },
- { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
- PCI_VENDOR_ID_AFAVLAB,
- PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0,
- pbn_b0_4_1152000 },
- { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0,
- pbn_b0_2_1843200_200 },
- { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232, 0, 0,
- pbn_b0_4_1843200_200 },
- { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232, 0, 0,
- pbn_b0_8_1843200_200 },
- { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1, 0, 0,
- pbn_b0_2_1843200_200 },
- { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2, 0, 0,
- pbn_b0_4_1843200_200 },
- { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4, 0, 0,
- pbn_b0_8_1843200_200 },
- { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2, 0, 0,
- pbn_b0_2_1843200_200 },
- { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4, 0, 0,
- pbn_b0_4_1843200_200 },
- { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8, 0, 0,
- pbn_b0_8_1843200_200 },
- { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485, 0, 0,
- pbn_b0_2_1843200_200 },
- { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485, 0, 0,
- pbn_b0_4_1843200_200 },
- { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
- PCI_SUBVENDOR_ID_CONNECT_TECH,
- PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0,
- pbn_b0_8_1843200_200 },
- { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
- PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT,
- 0, 0, pbn_exar_ibm_saturn },
-
- { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_bt_1_115200 },
- { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_bt_2_115200 },
- { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_bt_4_115200 },
- { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_bt_2_115200 },
- { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_bt_4_115200 },
- { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_8_115200 },
- { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_8_460800 },
- { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_8_115200 },
-
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_bt_2_115200 },
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_bt_2_921600 },
- /*
- * VScom SPCOM800, from sl@s.pl
- */
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_8_921600 },
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_4_921600 },
- /* Unknown card - subdevice 0x1584 */
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
- PCI_VENDOR_ID_PLX,
- PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
- pbn_b0_4_115200 },
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
- PCI_SUBVENDOR_ID_KEYSPAN,
- PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
- pbn_panacom },
- { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_panacom4 },
- { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_panacom2 },
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
- PCI_VENDOR_ID_ESDGMBH,
- PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0,
- pbn_b2_4_115200 },
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
- PCI_SUBVENDOR_ID_CHASE_PCIFAST,
- PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
- pbn_b2_4_460800 },
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
- PCI_SUBVENDOR_ID_CHASE_PCIFAST,
- PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
- pbn_b2_8_460800 },
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
- PCI_SUBVENDOR_ID_CHASE_PCIFAST,
- PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
- pbn_b2_16_460800 },
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
- PCI_SUBVENDOR_ID_CHASE_PCIFAST,
- PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
- pbn_b2_16_460800 },
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
- PCI_SUBVENDOR_ID_CHASE_PCIRAS,
- PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
- pbn_b2_4_460800 },
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
- PCI_SUBVENDOR_ID_CHASE_PCIRAS,
- PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
- pbn_b2_8_460800 },
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
- PCI_SUBVENDOR_ID_EXSYS,
- PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
- pbn_exsys_4055 },
- /*
- * Megawolf Romulus PCI Serial Card, from Mike Hudson
- * (Exoray@isys.ca)
- */
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
- 0x10b5, 0x106a, 0, 0,
- pbn_plx_romulus },
- { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_4_115200 },
- { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_2_115200 },
- { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_8_115200 },
- { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_8_115200 },
- { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
- PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4,
- 0, 0,
- pbn_b0_4_921600 },
- { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
- PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
- 0, 0,
- pbn_b0_4_1152000 },
- { PCI_VENDOR_ID_OXSEMI, 0x9505,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_2_921600 },
-
- /*
- * The below card is a little controversial since it is the
- * subject of a PCI vendor/device ID clash. (See
- * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
- * For now just used the hex ID 0x950a.
- */
- { PCI_VENDOR_ID_OXSEMI, 0x950a,
- PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL, 0, 0,
- pbn_b0_2_115200 },
- { PCI_VENDOR_ID_OXSEMI, 0x950a,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_2_1130000 },
- { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950,
- PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0,
- pbn_b0_1_921600 },
- { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_4_115200 },
- { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_2_921600 },
- { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
- PCI_ANY_ID , PCI_ANY_ID, 0, 0,
- pbn_b2_8_1152000 },
-
- /*
- * Oxford Semiconductor Inc. Tornado PCI express device range.
- */
- { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_2_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_2_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_4_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_4_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_8_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_8_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- /*
- * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado
- */
- { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */
- PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */
- PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0,
- pbn_oxsemi_2_4000000 },
- { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */
- PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0,
- pbn_oxsemi_4_4000000 },
- { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */
- PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0,
- pbn_oxsemi_8_4000000 },
-
- /*
- * Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado
- */
- { PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM,
- PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_2_4000000 },
-
- /*
- * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
- * from skokodyn@yahoo.com
- */
- { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
- PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0,
- pbn_sbsxrsio },
- { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
- PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0,
- pbn_sbsxrsio },
- { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
- PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0,
- pbn_sbsxrsio },
- { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
- PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0,
- pbn_sbsxrsio },
-
- /*
- * Digitan DS560-558, from jimd@esoft.com
- */
- { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_1_115200 },
-
- /*
- * Titan Electronic cards
- * The 400L and 800L have a custom setup quirk.
- */
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_2_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_4_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_4_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_1_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_bt_2_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_4_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_8_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b4_bt_2_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b4_bt_4_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b4_bt_8_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_4_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_4_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_4_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_2_4000000 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_4_4000000 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_8_4000000 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_2_4000000 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_2_4000000 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_4_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_410V3,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_4_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_4_921600 },
- { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3B,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_4_921600 },
-
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_1_460800 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_1_460800 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_1_460800 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_bt_2_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_bt_2_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_bt_2_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_bt_4_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_bt_4_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_bt_4_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_2_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_2_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_2_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_4_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_4_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_4_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_8_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_8_921600 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_8_921600 },
-
- /*
- * Computone devices submitted by Doug McNash dmcnash@computone.com
- */
- { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
- PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
- 0, 0, pbn_computone_4 },
- { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
- PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
- 0, 0, pbn_computone_8 },
- { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
- PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
- 0, 0, pbn_computone_6 },
-
- { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi },
- { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
- PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_1_921600 },
-
- /*
- * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org>
- */
- { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_8_115200 },
- { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_8_115200 },
-
- { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_2_115200 },
- { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_2_115200 },
- { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_2_115200 },
- { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_2_115200 },
- { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_2_115200 },
- { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_4_460800 },
- { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_4_460800 },
- { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_2_460800 },
- { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_2_460800 },
- { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_2_460800 },
- { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_1_115200 },
- { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_bt_1_460800 },
-
- /*
- * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408).
- * Cards are identified by their subsystem vendor IDs, which
- * (in hex) match the model number.
- *
- * Note that JC140x are RS422/485 cards which require ox950
- * ACR = 0x10, and as such are not currently fully supported.
- */
- { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
- 0x1204, 0x0004, 0, 0,
- pbn_b0_4_921600 },
- { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
- 0x1208, 0x0004, 0, 0,
- pbn_b0_4_921600 },
-/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
- 0x1402, 0x0002, 0, 0,
- pbn_b0_2_921600 }, */
-/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
- 0x1404, 0x0004, 0, 0,
- pbn_b0_4_921600 }, */
- { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1,
- 0x1208, 0x0004, 0, 0,
- pbn_b0_4_921600 },
-
- { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2,
- 0x1204, 0x0004, 0, 0,
- pbn_b0_4_921600 },
- { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2,
- 0x1208, 0x0004, 0, 0,
- pbn_b0_4_921600 },
- { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3,
- 0x1208, 0x0004, 0, 0,
- pbn_b0_4_921600 },
- /*
- * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com
- */
- { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_1_1382400 },
-
- /*
- * Dell Remote Access Card III - Tim_T_Murphy@Dell.com
- */
- { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_1_1382400 },
-
- /*
- * RAStel 2 port modem, gerg@moreton.com.au
- */
- { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_bt_2_115200 },
-
- /*
- * EKF addition for i960 Boards form EKF with serial port
- */
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP,
- 0xE4BF, PCI_ANY_ID, 0, 0,
- pbn_intel_i960 },
-
- /*
- * Xircom Cardbus/Ethernet combos
- */
- { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_115200 },
- /*
- * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry)
- */
- { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_115200 },
-
- /*
- * Untested PCI modems, sent in from various folks...
- */
-
- /*
- * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de>
- */
- { PCI_VENDOR_ID_ROCKWELL, 0x1004,
- 0x1048, 0x1500, 0, 0,
- pbn_b1_1_115200 },
-
- { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
- 0xFF00, 0, 0, 0,
- pbn_sgi_ioc3 },
-
- /*
- * HP Diva card
- */
- { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
- PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0,
- pbn_b1_1_115200 },
- { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_5_115200 },
- { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b2_1_115200 },
-
- { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b3_2_115200 },
- { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b3_4_115200 },
- { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b3_8_115200 },
-
- /*
- * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
- */
- { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
- PCI_ANY_ID, PCI_ANY_ID,
- 0,
- 0, pbn_exar_XR17C152 },
- { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
- PCI_ANY_ID, PCI_ANY_ID,
- 0,
- 0, pbn_exar_XR17C154 },
- { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
- PCI_ANY_ID, PCI_ANY_ID,
- 0,
- 0, pbn_exar_XR17C158 },
-
- /*
- * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
- */
- { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_115200 },
- /*
- * ITE
- */
- { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- pbn_b1_bt_1_115200 },
-
- /*
- * IntaShield IS-200
- */
- { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */
- pbn_b2_2_115200 },
- /*
- * IntaShield IS-400
- */
- { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */
- pbn_b2_4_115200 },
- /*
- * Perle PCI-RAS cards
- */
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
- PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4,
- 0, 0, pbn_b2_4_921600 },
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
- PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8,
- 0, 0, pbn_b2_8_921600 },
-
- /*
- * Mainpine series cards: Fairly standard layout but fools
- * parts of the autodetect in some cases and uses otherwise
- * unmatched communications subclasses in the PCI Express case
- */
-
- { /* RockForceDUO */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x0200,
- 0, 0, pbn_b0_2_115200 },
- { /* RockForceQUATRO */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x0300,
- 0, 0, pbn_b0_4_115200 },
- { /* RockForceDUO+ */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x0400,
- 0, 0, pbn_b0_2_115200 },
- { /* RockForceQUATRO+ */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x0500,
- 0, 0, pbn_b0_4_115200 },
- { /* RockForce+ */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x0600,
- 0, 0, pbn_b0_2_115200 },
- { /* RockForce+ */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x0700,
- 0, 0, pbn_b0_4_115200 },
- { /* RockForceOCTO+ */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x0800,
- 0, 0, pbn_b0_8_115200 },
- { /* RockForceDUO+ */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x0C00,
- 0, 0, pbn_b0_2_115200 },
- { /* RockForceQUARTRO+ */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x0D00,
- 0, 0, pbn_b0_4_115200 },
- { /* RockForceOCTO+ */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x1D00,
- 0, 0, pbn_b0_8_115200 },
- { /* RockForceD1 */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x2000,
- 0, 0, pbn_b0_1_115200 },
- { /* RockForceF1 */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x2100,
- 0, 0, pbn_b0_1_115200 },
- { /* RockForceD2 */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x2200,
- 0, 0, pbn_b0_2_115200 },
- { /* RockForceF2 */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x2300,
- 0, 0, pbn_b0_2_115200 },
- { /* RockForceD4 */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x2400,
- 0, 0, pbn_b0_4_115200 },
- { /* RockForceF4 */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x2500,
- 0, 0, pbn_b0_4_115200 },
- { /* RockForceD8 */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x2600,
- 0, 0, pbn_b0_8_115200 },
- { /* RockForceF8 */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x2700,
- 0, 0, pbn_b0_8_115200 },
- { /* IQ Express D1 */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x3000,
- 0, 0, pbn_b0_1_115200 },
- { /* IQ Express F1 */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x3100,
- 0, 0, pbn_b0_1_115200 },
- { /* IQ Express D2 */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x3200,
- 0, 0, pbn_b0_2_115200 },
- { /* IQ Express F2 */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x3300,
- 0, 0, pbn_b0_2_115200 },
- { /* IQ Express D4 */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x3400,
- 0, 0, pbn_b0_4_115200 },
- { /* IQ Express F4 */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x3500,
- 0, 0, pbn_b0_4_115200 },
- { /* IQ Express D8 */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x3C00,
- 0, 0, pbn_b0_8_115200 },
- { /* IQ Express F8 */
- PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
- PCI_VENDOR_ID_MAINPINE, 0x3D00,
- 0, 0, pbn_b0_8_115200 },
-
-
- /*
- * PA Semi PA6T-1682M on-chip UART
- */
- { PCI_VENDOR_ID_PASEMI, 0xa004,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pasemi_1682M },
-
- /*
- * National Instruments
- */
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_16_115200 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_8_115200 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_bt_4_115200 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_bt_2_115200 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_bt_4_115200 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_bt_2_115200 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_16_115200 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_8_115200 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_bt_4_115200 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_bt_2_115200 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_bt_4_115200 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b1_bt_2_115200 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_2 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_2 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_4 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_4 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_8 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_8 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_16 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_16 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_2 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_2 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_4 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_4 },
-
- /*
- * ADDI-DATA GmbH communication cards <info@addi-data.com>
- */
- { PCI_VENDOR_ID_ADDIDATA,
- PCI_DEVICE_ID_ADDIDATA_APCI7500,
- PCI_ANY_ID,
- PCI_ANY_ID,
- 0,
- 0,
- pbn_b0_4_115200 },
-
- { PCI_VENDOR_ID_ADDIDATA,
- PCI_DEVICE_ID_ADDIDATA_APCI7420,
- PCI_ANY_ID,
- PCI_ANY_ID,
- 0,
- 0,
- pbn_b0_2_115200 },
-
- { PCI_VENDOR_ID_ADDIDATA,
- PCI_DEVICE_ID_ADDIDATA_APCI7300,
- PCI_ANY_ID,
- PCI_ANY_ID,
- 0,
- 0,
- pbn_b0_1_115200 },
-
- { PCI_VENDOR_ID_ADDIDATA_OLD,
- PCI_DEVICE_ID_ADDIDATA_APCI7800,
- PCI_ANY_ID,
- PCI_ANY_ID,
- 0,
- 0,
- pbn_b1_8_115200 },
-
- { PCI_VENDOR_ID_ADDIDATA,
- PCI_DEVICE_ID_ADDIDATA_APCI7500_2,
- PCI_ANY_ID,
- PCI_ANY_ID,
- 0,
- 0,
- pbn_b0_4_115200 },
-
- { PCI_VENDOR_ID_ADDIDATA,
- PCI_DEVICE_ID_ADDIDATA_APCI7420_2,
- PCI_ANY_ID,
- PCI_ANY_ID,
- 0,
- 0,
- pbn_b0_2_115200 },
-
- { PCI_VENDOR_ID_ADDIDATA,
- PCI_DEVICE_ID_ADDIDATA_APCI7300_2,
- PCI_ANY_ID,
- PCI_ANY_ID,
- 0,
- 0,
- pbn_b0_1_115200 },
-
- { PCI_VENDOR_ID_ADDIDATA,
- PCI_DEVICE_ID_ADDIDATA_APCI7500_3,
- PCI_ANY_ID,
- PCI_ANY_ID,
- 0,
- 0,
- pbn_b0_4_115200 },
-
- { PCI_VENDOR_ID_ADDIDATA,
- PCI_DEVICE_ID_ADDIDATA_APCI7420_3,
- PCI_ANY_ID,
- PCI_ANY_ID,
- 0,
- 0,
- pbn_b0_2_115200 },
-
- { PCI_VENDOR_ID_ADDIDATA,
- PCI_DEVICE_ID_ADDIDATA_APCI7300_3,
- PCI_ANY_ID,
- PCI_ANY_ID,
- 0,
- 0,
- pbn_b0_1_115200 },
-
- { PCI_VENDOR_ID_ADDIDATA,
- PCI_DEVICE_ID_ADDIDATA_APCI7800_3,
- PCI_ANY_ID,
- PCI_ANY_ID,
- 0,
- 0,
- pbn_b0_8_115200 },
-
- { PCI_VENDOR_ID_ADDIDATA,
- PCI_DEVICE_ID_ADDIDATA_APCIe7500,
- PCI_ANY_ID,
- PCI_ANY_ID,
- 0,
- 0,
- pbn_ADDIDATA_PCIe_4_3906250 },
-
- { PCI_VENDOR_ID_ADDIDATA,
- PCI_DEVICE_ID_ADDIDATA_APCIe7420,
- PCI_ANY_ID,
- PCI_ANY_ID,
- 0,
- 0,
- pbn_ADDIDATA_PCIe_2_3906250 },
-
- { PCI_VENDOR_ID_ADDIDATA,
- PCI_DEVICE_ID_ADDIDATA_APCIe7300,
- PCI_ANY_ID,
- PCI_ANY_ID,
- 0,
- 0,
- pbn_ADDIDATA_PCIe_1_3906250 },
-
- { PCI_VENDOR_ID_ADDIDATA,
- PCI_DEVICE_ID_ADDIDATA_APCIe7800,
- PCI_ANY_ID,
- PCI_ANY_ID,
- 0,
- 0,
- pbn_ADDIDATA_PCIe_8_3906250 },
-
- { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
- PCI_VENDOR_ID_IBM, 0x0299,
- 0, 0, pbn_b0_bt_2_115200 },
-
- { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
- 0xA000, 0x1000,
- 0, 0, pbn_b0_1_115200 },
-
- /* the 9901 is a rebranded 9912 */
- { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
- 0xA000, 0x1000,
- 0, 0, pbn_b0_1_115200 },
-
- { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922,
- 0xA000, 0x1000,
- 0, 0, pbn_b0_1_115200 },
-
- { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904,
- 0xA000, 0x1000,
- 0, 0, pbn_b0_1_115200 },
-
- { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
- 0xA000, 0x1000,
- 0, 0, pbn_b0_1_115200 },
-
- { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
- 0xA000, 0x3002,
- 0, 0, pbn_NETMOS9900_2s_115200 },
-
- /*
- * Best Connectivity and Rosewill PCI Multi I/O cards
- */
-
- { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
- 0xA000, 0x1000,
- 0, 0, pbn_b0_1_115200 },
-
- { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
- 0xA000, 0x3002,
- 0, 0, pbn_b0_bt_2_115200 },
-
- { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
- 0xA000, 0x3004,
- 0, 0, pbn_b0_bt_4_115200 },
- /* Intel CE4100 */
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ce4100_1_115200 },
-
- /*
- * Cronyx Omega PCI
- */
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_omegapci },
-
- /*
- * These entries match devices with class COMMUNICATION_SERIAL,
- * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
- */
- { PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_COMMUNICATION_SERIAL << 8,
- 0xffff00, pbn_default },
- { PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_COMMUNICATION_MODEM << 8,
- 0xffff00, pbn_default },
- { PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_COMMUNICATION_MULTISERIAL << 8,
- 0xffff00, pbn_default },
- { 0, }
-};
-
-static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev,
- pci_channel_state_t state)
-{
- struct serial_private *priv = pci_get_drvdata(dev);
-
- if (state == pci_channel_io_perm_failure)
- return PCI_ERS_RESULT_DISCONNECT;
-
- if (priv)
- pciserial_suspend_ports(priv);
-
- pci_disable_device(dev);
-
- return PCI_ERS_RESULT_NEED_RESET;
-}
-
-static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev)
-{
- int rc;
-
- rc = pci_enable_device(dev);
-
- if (rc)
- return PCI_ERS_RESULT_DISCONNECT;
-
- pci_restore_state(dev);
- pci_save_state(dev);
-
- return PCI_ERS_RESULT_RECOVERED;
-}
-
-static void serial8250_io_resume(struct pci_dev *dev)
-{
- struct serial_private *priv = pci_get_drvdata(dev);
-
- if (priv)
- pciserial_resume_ports(priv);
-}
-
-static struct pci_error_handlers serial8250_err_handler = {
- .error_detected = serial8250_io_error_detected,
- .slot_reset = serial8250_io_slot_reset,
- .resume = serial8250_io_resume,
-};
-
-static struct pci_driver serial_pci_driver = {
- .name = "serial",
- .probe = pciserial_init_one,
- .remove = __devexit_p(pciserial_remove_one),
-#ifdef CONFIG_PM
- .suspend = pciserial_suspend_one,
- .resume = pciserial_resume_one,
-#endif
- .id_table = serial_pci_tbl,
- .err_handler = &serial8250_err_handler,
-};
-
-static int __init serial8250_pci_init(void)
-{
- return pci_register_driver(&serial_pci_driver);
-}
-
-static void __exit serial8250_pci_exit(void)
-{
- pci_unregister_driver(&serial_pci_driver);
-}
-
-module_init(serial8250_pci_init);
-module_exit(serial8250_pci_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
-MODULE_DEVICE_TABLE(pci, serial_pci_tbl);
+++ /dev/null
-/*
- * Probe module for 8250/16550-type ISAPNP serial ports.
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *
- * Copyright (C) 2001 Russell King, All Rights Reserved.
- *
- * Ported to the Linux PnP Layer - (C) Adam Belay.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/pnp.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/serial_core.h>
-#include <linux/bitops.h>
-
-#include <asm/byteorder.h>
-
-#include "8250.h"
-
-#define UNKNOWN_DEV 0x3000
-
-
-static const struct pnp_device_id pnp_dev_table[] = {
- /* Archtek America Corp. */
- /* Archtek SmartLink Modem 3334BT Plug & Play */
- { "AAC000F", 0 },
- /* Anchor Datacomm BV */
- /* SXPro 144 External Data Fax Modem Plug & Play */
- { "ADC0001", 0 },
- /* SXPro 288 External Data Fax Modem Plug & Play */
- { "ADC0002", 0 },
- /* PROLiNK 1456VH ISA PnP K56flex Fax Modem */
- { "AEI0250", 0 },
- /* Actiontec ISA PNP 56K X2 Fax Modem */
- { "AEI1240", 0 },
- /* Rockwell 56K ACF II Fax+Data+Voice Modem */
- { "AKY1021", 0 /*SPCI_FL_NO_SHIRQ*/ },
- /* AZT3005 PnP SOUND DEVICE */
- { "AZT4001", 0 },
- /* Best Data Products Inc. Smart One 336F PnP Modem */
- { "BDP3336", 0 },
- /* Boca Research */
- /* Boca Complete Ofc Communicator 14.4 Data-FAX */
- { "BRI0A49", 0 },
- /* Boca Research 33,600 ACF Modem */
- { "BRI1400", 0 },
- /* Boca 33.6 Kbps Internal FD34FSVD */
- { "BRI3400", 0 },
- /* Boca 33.6 Kbps Internal FD34FSVD */
- { "BRI0A49", 0 },
- /* Best Data Products Inc. Smart One 336F PnP Modem */
- { "BDP3336", 0 },
- /* Computer Peripherals Inc */
- /* EuroViVa CommCenter-33.6 SP PnP */
- { "CPI4050", 0 },
- /* Creative Labs */
- /* Creative Labs Phone Blaster 28.8 DSVD PnP Voice */
- { "CTL3001", 0 },
- /* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */
- { "CTL3011", 0 },
- /* Davicom ISA 33.6K Modem */
- { "DAV0336", 0 },
- /* Creative */
- /* Creative Modem Blaster Flash56 DI5601-1 */
- { "DMB1032", 0 },
- /* Creative Modem Blaster V.90 DI5660 */
- { "DMB2001", 0 },
- /* E-Tech */
- /* E-Tech CyberBULLET PC56RVP */
- { "ETT0002", 0 },
- /* FUJITSU */
- /* Fujitsu 33600 PnP-I2 R Plug & Play */
- { "FUJ0202", 0 },
- /* Fujitsu FMV-FX431 Plug & Play */
- { "FUJ0205", 0 },
- /* Fujitsu 33600 PnP-I4 R Plug & Play */
- { "FUJ0206", 0 },
- /* Fujitsu Fax Voice 33600 PNP-I5 R Plug & Play */
- { "FUJ0209", 0 },
- /* Archtek America Corp. */
- /* Archtek SmartLink Modem 3334BT Plug & Play */
- { "GVC000F", 0 },
- /* Archtek SmartLink Modem 3334BRV 33.6K Data Fax Voice */
- { "GVC0303", 0 },
- /* Hayes */
- /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */
- { "HAY0001", 0 },
- /* Hayes Optima 336 V.34 + FAX + Voice PnP */
- { "HAY000C", 0 },
- /* Hayes Optima 336B V.34 + FAX + Voice PnP */
- { "HAY000D", 0 },
- /* Hayes Accura 56K Ext Fax Modem PnP */
- { "HAY5670", 0 },
- /* Hayes Accura 56K Ext Fax Modem PnP */
- { "HAY5674", 0 },
- /* Hayes Accura 56K Fax Modem PnP */
- { "HAY5675", 0 },
- /* Hayes 288, V.34 + FAX */
- { "HAYF000", 0 },
- /* Hayes Optima 288 V.34 + FAX + Voice, Plug & Play */
- { "HAYF001", 0 },
- /* IBM */
- /* IBM Thinkpad 701 Internal Modem Voice */
- { "IBM0033", 0 },
- /* Intermec */
- /* Intermec CV60 touchscreen port */
- { "PNP4972", 0 },
- /* Intertex */
- /* Intertex 28k8 33k6 Voice EXT PnP */
- { "IXDC801", 0 },
- /* Intertex 33k6 56k Voice EXT PnP */
- { "IXDC901", 0 },
- /* Intertex 28k8 33k6 Voice SP EXT PnP */
- { "IXDD801", 0 },
- /* Intertex 33k6 56k Voice SP EXT PnP */
- { "IXDD901", 0 },
- /* Intertex 28k8 33k6 Voice SP INT PnP */
- { "IXDF401", 0 },
- /* Intertex 28k8 33k6 Voice SP EXT PnP */
- { "IXDF801", 0 },
- /* Intertex 33k6 56k Voice SP EXT PnP */
- { "IXDF901", 0 },
- /* Kortex International */
- /* KORTEX 28800 Externe PnP */
- { "KOR4522", 0 },
- /* KXPro 33.6 Vocal ASVD PnP */
- { "KORF661", 0 },
- /* Lasat */
- /* LASAT Internet 33600 PnP */
- { "LAS4040", 0 },
- /* Lasat Safire 560 PnP */
- { "LAS4540", 0 },
- /* Lasat Safire 336 PnP */
- { "LAS5440", 0 },
- /* Microcom, Inc. */
- /* Microcom TravelPorte FAST V.34 Plug & Play */
- { "MNP0281", 0 },
- /* Microcom DeskPorte V.34 FAST or FAST+ Plug & Play */
- { "MNP0336", 0 },
- /* Microcom DeskPorte FAST EP 28.8 Plug & Play */
- { "MNP0339", 0 },
- /* Microcom DeskPorte 28.8P Plug & Play */
- { "MNP0342", 0 },
- /* Microcom DeskPorte FAST ES 28.8 Plug & Play */
- { "MNP0500", 0 },
- /* Microcom DeskPorte FAST ES 28.8 Plug & Play */
- { "MNP0501", 0 },
- /* Microcom DeskPorte 28.8S Internal Plug & Play */
- { "MNP0502", 0 },
- /* Motorola */
- /* Motorola BitSURFR Plug & Play */
- { "MOT1105", 0 },
- /* Motorola TA210 Plug & Play */
- { "MOT1111", 0 },
- /* Motorola HMTA 200 (ISDN) Plug & Play */
- { "MOT1114", 0 },
- /* Motorola BitSURFR Plug & Play */
- { "MOT1115", 0 },
- /* Motorola Lifestyle 28.8 Internal */
- { "MOT1190", 0 },
- /* Motorola V.3400 Plug & Play */
- { "MOT1501", 0 },
- /* Motorola Lifestyle 28.8 V.34 Plug & Play */
- { "MOT1502", 0 },
- /* Motorola Power 28.8 V.34 Plug & Play */
- { "MOT1505", 0 },
- /* Motorola ModemSURFR External 28.8 Plug & Play */
- { "MOT1509", 0 },
- /* Motorola Premier 33.6 Desktop Plug & Play */
- { "MOT150A", 0 },
- /* Motorola VoiceSURFR 56K External PnP */
- { "MOT150F", 0 },
- /* Motorola ModemSURFR 56K External PnP */
- { "MOT1510", 0 },
- /* Motorola ModemSURFR 56K Internal PnP */
- { "MOT1550", 0 },
- /* Motorola ModemSURFR Internal 28.8 Plug & Play */
- { "MOT1560", 0 },
- /* Motorola Premier 33.6 Internal Plug & Play */
- { "MOT1580", 0 },
- /* Motorola OnlineSURFR 28.8 Internal Plug & Play */
- { "MOT15B0", 0 },
- /* Motorola VoiceSURFR 56K Internal PnP */
- { "MOT15F0", 0 },
- /* Com 1 */
- /* Deskline K56 Phone System PnP */
- { "MVX00A1", 0 },
- /* PC Rider K56 Phone System PnP */
- { "MVX00F2", 0 },
- /* NEC 98NOTE SPEAKER PHONE FAX MODEM(33600bps) */
- { "nEC8241", 0 },
- /* Pace 56 Voice Internal Plug & Play Modem */
- { "PMC2430", 0 },
- /* Generic */
- /* Generic standard PC COM port */
- { "PNP0500", 0 },
- /* Generic 16550A-compatible COM port */
- { "PNP0501", 0 },
- /* Compaq 14400 Modem */
- { "PNPC000", 0 },
- /* Compaq 2400/9600 Modem */
- { "PNPC001", 0 },
- /* Dial-Up Networking Serial Cable between 2 PCs */
- { "PNPC031", 0 },
- /* Dial-Up Networking Parallel Cable between 2 PCs */
- { "PNPC032", 0 },
- /* Standard 9600 bps Modem */
- { "PNPC100", 0 },
- /* Standard 14400 bps Modem */
- { "PNPC101", 0 },
- /* Standard 28800 bps Modem*/
- { "PNPC102", 0 },
- /* Standard Modem*/
- { "PNPC103", 0 },
- /* Standard 9600 bps Modem*/
- { "PNPC104", 0 },
- /* Standard 14400 bps Modem*/
- { "PNPC105", 0 },
- /* Standard 28800 bps Modem*/
- { "PNPC106", 0 },
- /* Standard Modem */
- { "PNPC107", 0 },
- /* Standard 9600 bps Modem */
- { "PNPC108", 0 },
- /* Standard 14400 bps Modem */
- { "PNPC109", 0 },
- /* Standard 28800 bps Modem */
- { "PNPC10A", 0 },
- /* Standard Modem */
- { "PNPC10B", 0 },
- /* Standard 9600 bps Modem */
- { "PNPC10C", 0 },
- /* Standard 14400 bps Modem */
- { "PNPC10D", 0 },
- /* Standard 28800 bps Modem */
- { "PNPC10E", 0 },
- /* Standard Modem */
- { "PNPC10F", 0 },
- /* Standard PCMCIA Card Modem */
- { "PNP2000", 0 },
- /* Rockwell */
- /* Modular Technology */
- /* Rockwell 33.6 DPF Internal PnP */
- /* Modular Technology 33.6 Internal PnP */
- { "ROK0030", 0 },
- /* Kortex International */
- /* KORTEX 14400 Externe PnP */
- { "ROK0100", 0 },
- /* Rockwell 28.8 */
- { "ROK4120", 0 },
- /* Viking Components, Inc */
- /* Viking 28.8 INTERNAL Fax+Data+Voice PnP */
- { "ROK4920", 0 },
- /* Rockwell */
- /* British Telecom */
- /* Modular Technology */
- /* Rockwell 33.6 DPF External PnP */
- /* BT Prologue 33.6 External PnP */
- /* Modular Technology 33.6 External PnP */
- { "RSS00A0", 0 },
- /* Viking 56K FAX INT */
- { "RSS0262", 0 },
- /* K56 par,VV,Voice,Speakphone,AudioSpan,PnP */
- { "RSS0250", 0 },
- /* SupraExpress 28.8 Data/Fax PnP modem */
- { "SUP1310", 0 },
- /* SupraExpress 336i PnP Voice Modem */
- { "SUP1381", 0 },
- /* SupraExpress 33.6 Data/Fax PnP modem */
- { "SUP1421", 0 },
- /* SupraExpress 33.6 Data/Fax PnP modem */
- { "SUP1590", 0 },
- /* SupraExpress 336i Sp ASVD */
- { "SUP1620", 0 },
- /* SupraExpress 33.6 Data/Fax PnP modem */
- { "SUP1760", 0 },
- /* SupraExpress 56i Sp Intl */
- { "SUP2171", 0 },
- /* Phoebe Micro */
- /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */
- { "TEX0011", 0 },
- /* Archtek America Corp. */
- /* Archtek SmartLink Modem 3334BT Plug & Play */
- { "UAC000F", 0 },
- /* 3Com Corp. */
- /* Gateway Telepath IIvi 33.6 */
- { "USR0000", 0 },
- /* U.S. Robotics Sporster 33.6K Fax INT PnP */
- { "USR0002", 0 },
- /* Sportster Vi 14.4 PnP FAX Voicemail */
- { "USR0004", 0 },
- /* U.S. Robotics 33.6K Voice INT PnP */
- { "USR0006", 0 },
- /* U.S. Robotics 33.6K Voice EXT PnP */
- { "USR0007", 0 },
- /* U.S. Robotics Courier V.Everything INT PnP */
- { "USR0009", 0 },
- /* U.S. Robotics 33.6K Voice INT PnP */
- { "USR2002", 0 },
- /* U.S. Robotics 56K Voice INT PnP */
- { "USR2070", 0 },
- /* U.S. Robotics 56K Voice EXT PnP */
- { "USR2080", 0 },
- /* U.S. Robotics 56K FAX INT */
- { "USR3031", 0 },
- /* U.S. Robotics 56K FAX INT */
- { "USR3050", 0 },
- /* U.S. Robotics 56K Voice INT PnP */
- { "USR3070", 0 },
- /* U.S. Robotics 56K Voice EXT PnP */
- { "USR3080", 0 },
- /* U.S. Robotics 56K Voice INT PnP */
- { "USR3090", 0 },
- /* U.S. Robotics 56K Message */
- { "USR9100", 0 },
- /* U.S. Robotics 56K FAX EXT PnP*/
- { "USR9160", 0 },
- /* U.S. Robotics 56K FAX INT PnP*/
- { "USR9170", 0 },
- /* U.S. Robotics 56K Voice EXT PnP*/
- { "USR9180", 0 },
- /* U.S. Robotics 56K Voice INT PnP*/
- { "USR9190", 0 },
- /* Wacom tablets */
- { "WACFXXX", 0 },
- /* Compaq touchscreen */
- { "FPI2002", 0 },
- /* Fujitsu Stylistic touchscreens */
- { "FUJ02B2", 0 },
- { "FUJ02B3", 0 },
- /* Fujitsu Stylistic LT touchscreens */
- { "FUJ02B4", 0 },
- /* Passive Fujitsu Stylistic touchscreens */
- { "FUJ02B6", 0 },
- { "FUJ02B7", 0 },
- { "FUJ02B8", 0 },
- { "FUJ02B9", 0 },
- { "FUJ02BC", 0 },
- /* Fujitsu Wacom Tablet PC device */
- { "FUJ02E5", 0 },
- /* Fujitsu P-series tablet PC device */
- { "FUJ02E6", 0 },
- /* Fujitsu Wacom 2FGT Tablet PC device */
- { "FUJ02E7", 0 },
- /* Fujitsu Wacom 1FGT Tablet PC device */
- { "FUJ02E9", 0 },
- /*
- * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
- * disguise)
- */
- { "LTS0001", 0 },
- /* Rockwell's (PORALiNK) 33600 INT PNP */
- { "WCI0003", 0 },
- /* Unknown PnP modems */
- { "PNPCXXX", UNKNOWN_DEV },
- /* More unknown PnP modems */
- { "PNPDXXX", UNKNOWN_DEV },
- { "", 0 }
-};
-
-MODULE_DEVICE_TABLE(pnp, pnp_dev_table);
-
-static char *modem_names[] __devinitdata = {
- "MODEM", "Modem", "modem", "FAX", "Fax", "fax",
- "56K", "56k", "K56", "33.6", "28.8", "14.4",
- "33,600", "28,800", "14,400", "33.600", "28.800", "14.400",
- "33600", "28800", "14400", "V.90", "V.34", "V.32", NULL
-};
-
-static int __devinit check_name(char *name)
-{
- char **tmp;
-
- for (tmp = modem_names; *tmp; tmp++)
- if (strstr(name, *tmp))
- return 1;
-
- return 0;
-}
-
-static int __devinit check_resources(struct pnp_dev *dev)
-{
- resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8};
- int i;
-
- for (i = 0; i < ARRAY_SIZE(base); i++) {
- if (pnp_possible_config(dev, IORESOURCE_IO, base[i], 8))
- return 1;
- }
-
- return 0;
-}
-
-/*
- * Given a complete unknown PnP device, try to use some heuristics to
- * detect modems. Currently use such heuristic set:
- * - dev->name or dev->bus->name must contain "modem" substring;
- * - device must have only one IO region (8 byte long) with base address
- * 0x2e8, 0x3e8, 0x2f8 or 0x3f8.
- *
- * Such detection looks very ugly, but can detect at least some of numerous
- * PnP modems, alternatively we must hardcode all modems in pnp_devices[]
- * table.
- */
-static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags)
-{
- if (!(check_name(pnp_dev_name(dev)) ||
- (dev->card && check_name(dev->card->name))))
- return -ENODEV;
-
- if (check_resources(dev))
- return 0;
-
- return -ENODEV;
-}
-
-static int __devinit
-serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
-{
- struct uart_port port;
- int ret, line, flags = dev_id->driver_data;
-
- if (flags & UNKNOWN_DEV) {
- ret = serial_pnp_guess_board(dev, &flags);
- if (ret < 0)
- return ret;
- }
-
- memset(&port, 0, sizeof(struct uart_port));
- if (pnp_irq_valid(dev, 0))
- port.irq = pnp_irq(dev, 0);
- if (pnp_port_valid(dev, 0)) {
- port.iobase = pnp_port_start(dev, 0);
- port.iotype = UPIO_PORT;
- } else if (pnp_mem_valid(dev, 0)) {
- port.mapbase = pnp_mem_start(dev, 0);
- port.iotype = UPIO_MEM;
- port.flags = UPF_IOREMAP;
- } else
- return -ENODEV;
-
-#ifdef SERIAL_DEBUG_PNP
- printk(KERN_DEBUG
- "Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
- port.iobase, port.mapbase, port.irq, port.iotype);
-#endif
-
- port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
- if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE)
- port.flags |= UPF_SHARE_IRQ;
- port.uartclk = 1843200;
- port.dev = &dev->dev;
-
- line = serial8250_register_port(&port);
- if (line < 0)
- return -ENODEV;
-
- pnp_set_drvdata(dev, (void *)((long)line + 1));
- return 0;
-}
-
-static void __devexit serial_pnp_remove(struct pnp_dev *dev)
-{
- long line = (long)pnp_get_drvdata(dev);
- if (line)
- serial8250_unregister_port(line - 1);
-}
-
-#ifdef CONFIG_PM
-static int serial_pnp_suspend(struct pnp_dev *dev, pm_message_t state)
-{
- long line = (long)pnp_get_drvdata(dev);
-
- if (!line)
- return -ENODEV;
- serial8250_suspend_port(line - 1);
- return 0;
-}
-
-static int serial_pnp_resume(struct pnp_dev *dev)
-{
- long line = (long)pnp_get_drvdata(dev);
-
- if (!line)
- return -ENODEV;
- serial8250_resume_port(line - 1);
- return 0;
-}
-#else
-#define serial_pnp_suspend NULL
-#define serial_pnp_resume NULL
-#endif /* CONFIG_PM */
-
-static struct pnp_driver serial_pnp_driver = {
- .name = "serial",
- .probe = serial_pnp_probe,
- .remove = __devexit_p(serial_pnp_remove),
- .suspend = serial_pnp_suspend,
- .resume = serial_pnp_resume,
- .id_table = pnp_dev_table,
-};
-
-static int __init serial8250_pnp_init(void)
-{
- return pnp_register_driver(&serial_pnp_driver);
-}
-
-static void __exit serial8250_pnp_exit(void)
-{
- pnp_unregister_driver(&serial_pnp_driver);
-}
-
-module_init(serial8250_pnp_init);
-module_exit(serial8250_pnp_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Generic 8250/16x50 PnP serial driver");
menu "Serial drivers"
depends on HAS_IOMEM
-#
-# The new 8250/16550 serial drivers
-config SERIAL_8250
- tristate "8250/16550 and compatible serial support"
- select SERIAL_CORE
- ---help---
- This selects whether you want to include the driver for the standard
- serial ports. The standard answer is Y. People who might say N
- here are those that are setting up dedicated Ethernet WWW/FTP
- servers, or users that have one of the various bus mice instead of a
- serial mouse and don't intend to use their machine's standard serial
- port for anything. (Note that the Cyclades and Stallion multi
- serial port drivers do not need this driver built in for them to
- work.)
-
- To compile this driver as a module, choose M here: the
- module will be called 8250.
- [WARNING: Do not compile this driver as a module if you are using
- non-standard serial ports, since the configuration information will
- be lost when the driver is unloaded. This limitation may be lifted
- in the future.]
-
- BTW1: If you have a mouseman serial mouse which is not recognized by
- the X window system, try running gpm first.
-
- BTW2: If you intend to use a software modem (also called Winmodem)
- under Linux, forget it. These modems are crippled and require
- proprietary drivers which are only available under Windows.
-
- Most people will say Y or M here, so that they can use serial mice,
- modems and similar devices connecting to the standard serial ports.
-
-config SERIAL_8250_CONSOLE
- bool "Console on 8250/16550 and compatible serial port"
- depends on SERIAL_8250=y
- select SERIAL_CORE_CONSOLE
- ---help---
- If you say Y here, it will be possible to use a serial port as the
- system console (the system console is the device which receives all
- kernel messages and warnings and which allows logins in single user
- mode). This could be useful if some terminal or printer is connected
- to that serial port.
-
- Even if you say Y here, the currently visible virtual console
- (/dev/tty0) will still be used as the system console by default, but
- you can alter that using a kernel command line option such as
- "console=ttyS1". (Try "man bootparam" or see the documentation of
- your boot loader (grub or lilo or loadlin) about how to pass options
- to the kernel at boot time.)
-
- If you don't have a VGA card installed and you say Y here, the
- kernel will automatically use the first serial line, /dev/ttyS0, as
- system console.
-
- You can set that using a kernel command line option such as
- "console=uart8250,io,0x3f8,9600n8"
- "console=uart8250,mmio,0xff5e0000,115200n8".
- and it will switch to normal serial console when the corresponding
- port is ready.
- "earlycon=uart8250,io,0x3f8,9600n8"
- "earlycon=uart8250,mmio,0xff5e0000,115200n8".
- it will not only setup early console.
-
- If unsure, say N.
-
-config FIX_EARLYCON_MEM
- bool
- depends on X86
- default y
-
-config SERIAL_8250_GSC
- tristate
- depends on SERIAL_8250 && GSC
- default SERIAL_8250
-
-config SERIAL_8250_PCI
- tristate "8250/16550 PCI device support" if EXPERT
- depends on SERIAL_8250 && PCI
- default SERIAL_8250
- help
- This builds standard PCI serial support. You may be able to
- disable this feature if you only need legacy serial support.
- Saves about 9K.
-
-config SERIAL_8250_PNP
- tristate "8250/16550 PNP device support" if EXPERT
- depends on SERIAL_8250 && PNP
- default SERIAL_8250
- help
- This builds standard PNP serial support. You may be able to
- disable this feature if you only need legacy serial support.
-
-config SERIAL_8250_FSL
- bool
- depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550
- default PPC
-
-config SERIAL_8250_HP300
- tristate
- depends on SERIAL_8250 && HP300
- default SERIAL_8250
-
-config SERIAL_8250_CS
- tristate "8250/16550 PCMCIA device support"
- depends on PCMCIA && SERIAL_8250
- ---help---
- Say Y here to enable support for 16-bit PCMCIA serial devices,
- including serial port cards, modems, and the modem functions of
- multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
- credit-card size devices often used with laptops.)
-
- To compile this driver as a module, choose M here: the
- module will be called serial_cs.
-
- If unsure, say N.
-
-config SERIAL_8250_NR_UARTS
- int "Maximum number of 8250/16550 serial ports"
- depends on SERIAL_8250
- default "4"
- help
- Set this to the number of serial ports you want the driver
- to support. This includes any ports discovered via ACPI or
- PCI enumeration and any ports that may be added at run-time
- via hot-plug, or any ISA multi-port serial cards.
-
-config SERIAL_8250_RUNTIME_UARTS
- int "Number of 8250/16550 serial ports to register at runtime"
- depends on SERIAL_8250
- range 0 SERIAL_8250_NR_UARTS
- default "4"
- help
- Set this to the maximum number of serial ports you want
- the kernel to register at boot time. This can be overridden
- with the module parameter "nr_uarts", or boot-time parameter
- 8250.nr_uarts
-
-config SERIAL_8250_EXTENDED
- bool "Extended 8250/16550 serial driver options"
- depends on SERIAL_8250
- help
- If you wish to use any non-standard features of the standard "dumb"
- driver, say Y here. This includes HUB6 support, shared serial
- interrupts, special multiport support, support for more than the
- four COM 1/2/3/4 boards, etc.
-
- Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about serial driver options. If unsure, say N.
-
-config SERIAL_8250_MANY_PORTS
- bool "Support more than 4 legacy serial ports"
- depends on SERIAL_8250_EXTENDED && !IA64
- help
- Say Y here if you have dumb serial boards other than the four
- standard COM 1/2/3/4 ports. This may happen if you have an AST
- FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
- from <http://www.tldp.org/docs.html#howto>), or other custom
- serial port hardware which acts similar to standard serial port
- hardware. If you only use the standard COM 1/2/3/4 ports, you can
- say N here to save some memory. You can also say Y if you have an
- "intelligent" multiport card such as Cyclades, Digiboards, etc.
-
-#
-# Multi-port serial cards
-#
-
-config SERIAL_8250_FOURPORT
- tristate "Support Fourport cards"
- depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
- help
- Say Y here if you have an AST FourPort serial board.
-
- To compile this driver as a module, choose M here: the module
- will be called 8250_fourport.
-
-config SERIAL_8250_ACCENT
- tristate "Support Accent cards"
- depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
- help
- Say Y here if you have an Accent Async serial board.
-
- To compile this driver as a module, choose M here: the module
- will be called 8250_accent.
-
-config SERIAL_8250_BOCA
- tristate "Support Boca cards"
- depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
- help
- Say Y here if you have a Boca serial board. Please read the Boca
- mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
-
- To compile this driver as a module, choose M here: the module
- will be called 8250_boca.
-
-config SERIAL_8250_EXAR_ST16C554
- tristate "Support Exar ST16C554/554D Quad UART"
- depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
- help
- The Uplogix Envoy TU301 uses this Exar Quad UART. If you are
- tinkering with your Envoy TU301, or have a machine with this UART,
- say Y here.
-
- To compile this driver as a module, choose M here: the module
- will be called 8250_exar_st16c554.
-
-config SERIAL_8250_HUB6
- tristate "Support Hub6 cards"
- depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
- help
- Say Y here if you have a HUB6 serial board.
-
- To compile this driver as a module, choose M here: the module
- will be called 8250_hub6.
-
-config SERIAL_8250_SHARE_IRQ
- bool "Support for sharing serial interrupts"
- depends on SERIAL_8250_EXTENDED
- help
- Some serial boards have hardware support which allows multiple dumb
- serial ports on the same board to share a single IRQ. To enable
- support for this in the serial driver, say Y here.
-
-config SERIAL_8250_DETECT_IRQ
- bool "Autodetect IRQ on standard ports (unsafe)"
- depends on SERIAL_8250_EXTENDED
- help
- Say Y here if you want the kernel to try to guess which IRQ
- to use for your serial port.
-
- This is considered unsafe; it is far better to configure the IRQ in
- a boot script using the setserial command.
-
- If unsure, say N.
-
-config SERIAL_8250_RSA
- bool "Support RSA serial ports"
- depends on SERIAL_8250_EXTENDED
- help
- ::: To be written :::
-
-config SERIAL_8250_MCA
- tristate "Support 8250-type ports on MCA buses"
- depends on SERIAL_8250 != n && MCA
- help
- Say Y here if you have a MCA serial ports.
-
- To compile this driver as a module, choose M here: the module
- will be called 8250_mca.
-
-config SERIAL_8250_ACORN
- tristate "Acorn expansion card serial port support"
- depends on ARCH_ACORN && SERIAL_8250
- help
- If you have an Atomwide Serial card or Serial Port card for an Acorn
- system, say Y to this option. The driver can handle 1, 2, or 3 port
- cards. If unsure, say N.
-
-config SERIAL_8250_RM9K
- bool "Support for MIPS RM9xxx integrated serial port"
- depends on SERIAL_8250 != n && SERIAL_RM9000
- select SERIAL_8250_SHARE_IRQ
- help
- Selecting this option will add support for the integrated serial
- port hardware found on MIPS RM9122 and similar processors.
- If unsure, say N.
-
-config SERIAL_8250_DW
- tristate "Support for Synopsys DesignWare 8250 quirks"
- depends on SERIAL_8250 && OF
- help
- Selecting this option will enable handling of the extra features
- present in the Synopsys DesignWare APB UART.
+source "drivers/tty/serial/8250/Kconfig"
comment "Non-8250 serial port support"
obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
-obj-$(CONFIG_SERIAL_8250) += 8250.o
-obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
-obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
-obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
-obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
-obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o
-obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
-obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o
-obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o
-obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
-obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
-obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
-obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
-obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
-obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
-obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
+# Now bring in any enabled 8250/16450/16550 type drivers.
+obj-$(CONFIG_SERIAL_8250) += 8250/
+
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
+++ /dev/null
-/*
- * m32r_sio.c
- *
- * Driver for M32R serial ports
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- * Based on drivers/serial/8250.c.
- *
- * Copyright (C) 2001 Russell King.
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/*
- * A note about mapbase / membase
- *
- * mapbase is the physical address of the IO port. Currently, we don't
- * support this very well, and it may well be dropped from this driver
- * in future. As such, mapbase should be NULL.
- *
- * membase is an 'ioremapped' cookie. This is compatible with the old
- * serial.c driver, and is currently the preferred form.
- */
-
-#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/module.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/delay.h>
-
-#include <asm/m32r.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#define PORT_M32R_BASE PORT_M32R_SIO
-#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1)
-#define BAUD_RATE 115200
-
-#include <linux/serial_core.h>
-#include "m32r_sio.h"
-#include "m32r_sio_reg.h"
-
-/*
- * Debugging.
- */
-#if 0
-#define DEBUG_AUTOCONF(fmt...) printk(fmt)
-#else
-#define DEBUG_AUTOCONF(fmt...) do { } while (0)
-#endif
-
-#if 0
-#define DEBUG_INTR(fmt...) printk(fmt)
-#else
-#define DEBUG_INTR(fmt...) do { } while (0)
-#endif
-
-#define PASS_LIMIT 256
-
-/*
- * We default to IRQ0 for the "no irq" hack. Some
- * machine types want others as well - they're free
- * to redefine this in their header file.
- */
-#define is_real_interrupt(irq) ((irq) != 0)
-
-#define BASE_BAUD 115200
-
-/* Standard COM flags */
-#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
-
-/*
- * SERIAL_PORT_DFNS tells us about built-in ports that have no
- * standard enumeration mechanism. Platforms that can find all
- * serial ports via mechanisms like ACPI or PCI need not supply it.
- */
-#if defined(CONFIG_PLAT_USRV)
-
-#define SERIAL_PORT_DFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \
- { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */
-
-#else /* !CONFIG_PLAT_USRV */
-
-#if defined(CONFIG_SERIAL_M32R_PLDSIO)
-#define SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \
- STD_COM_FLAGS }, /* ttyS0 */
-#else
-#define SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \
- STD_COM_FLAGS }, /* ttyS0 */
-#endif
-
-#endif /* !CONFIG_PLAT_USRV */
-
-static struct old_serial_port old_serial_port[] = {
- SERIAL_PORT_DFNS
-};
-
-#define UART_NR ARRAY_SIZE(old_serial_port)
-
-struct uart_sio_port {
- struct uart_port port;
- struct timer_list timer; /* "no irq" timer */
- struct list_head list; /* ports on this IRQ */
- unsigned short rev;
- unsigned char acr;
- unsigned char ier;
- unsigned char lcr;
- unsigned char mcr_mask; /* mask of user bits */
- unsigned char mcr_force; /* mask of forced bits */
- unsigned char lsr_break_flag;
-
- /*
- * We provide a per-port pm hook.
- */
- void (*pm)(struct uart_port *port,
- unsigned int state, unsigned int old);
-};
-
-struct irq_info {
- spinlock_t lock;
- struct list_head *head;
-};
-
-static struct irq_info irq_lists[NR_IRQS];
-
-/*
- * Here we define the default xmit fifo size used for each type of UART.
- */
-static const struct serial_uart_config uart_config[] = {
- [PORT_UNKNOWN] = {
- .name = "unknown",
- .dfl_xmit_fifo_size = 1,
- .flags = 0,
- },
- [PORT_INDEX(PORT_M32R_SIO)] = {
- .name = "M32RSIO",
- .dfl_xmit_fifo_size = 1,
- .flags = 0,
- },
-};
-
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-
-#define __sio_in(x) inw((unsigned long)(x))
-#define __sio_out(v,x) outw((v),(unsigned long)(x))
-
-static inline void sio_set_baud_rate(unsigned long baud)
-{
- unsigned short sbaud;
- sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1;
- __sio_out(sbaud, PLD_ESIO0BAUR);
-}
-
-static void sio_reset(void)
-{
- unsigned short tmp;
-
- tmp = __sio_in(PLD_ESIO0RXB);
- tmp = __sio_in(PLD_ESIO0RXB);
- tmp = __sio_in(PLD_ESIO0CR);
- sio_set_baud_rate(BAUD_RATE);
- __sio_out(0x0300, PLD_ESIO0CR);
- __sio_out(0x0003, PLD_ESIO0CR);
-}
-
-static void sio_init(void)
-{
- unsigned short tmp;
-
- tmp = __sio_in(PLD_ESIO0RXB);
- tmp = __sio_in(PLD_ESIO0RXB);
- tmp = __sio_in(PLD_ESIO0CR);
- __sio_out(0x0300, PLD_ESIO0CR);
- __sio_out(0x0003, PLD_ESIO0CR);
-}
-
-static void sio_error(int *status)
-{
- printk("SIO0 error[%04x]\n", *status);
- do {
- sio_init();
- } while ((*status = __sio_in(PLD_ESIO0CR)) != 3);
-}
-
-#else /* not CONFIG_SERIAL_M32R_PLDSIO */
-
-#define __sio_in(x) inl(x)
-#define __sio_out(v,x) outl((v),(x))
-
-static inline void sio_set_baud_rate(unsigned long baud)
-{
- unsigned long i, j;
-
- i = boot_cpu_data.bus_clock / (baud * 16);
- j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud;
- i -= 1;
- j = (j + 1) >> 1;
-
- __sio_out(i, M32R_SIO0_BAUR_PORTL);
- __sio_out(j, M32R_SIO0_RBAUR_PORTL);
-}
-
-static void sio_reset(void)
-{
- __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */
- __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */
- __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */
- sio_set_baud_rate(BAUD_RATE);
- __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL);
- __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */
-}
-
-static void sio_init(void)
-{
- unsigned int tmp;
-
- tmp = __sio_in(M32R_SIO0_RXB_PORTL);
- tmp = __sio_in(M32R_SIO0_RXB_PORTL);
- tmp = __sio_in(M32R_SIO0_STS_PORTL);
- __sio_out(0x00000003, M32R_SIO0_CR_PORTL);
-}
-
-static void sio_error(int *status)
-{
- printk("SIO0 error[%04x]\n", *status);
- do {
- sio_init();
- } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3);
-}
-
-#endif /* CONFIG_SERIAL_M32R_PLDSIO */
-
-static unsigned int sio_in(struct uart_sio_port *up, int offset)
-{
- return __sio_in(up->port.iobase + offset);
-}
-
-static void sio_out(struct uart_sio_port *up, int offset, int value)
-{
- __sio_out(value, up->port.iobase + offset);
-}
-
-static unsigned int serial_in(struct uart_sio_port *up, int offset)
-{
- if (!offset)
- return 0;
-
- return __sio_in(offset);
-}
-
-static void serial_out(struct uart_sio_port *up, int offset, int value)
-{
- if (!offset)
- return;
-
- __sio_out(value, offset);
-}
-
-static void m32r_sio_stop_tx(struct uart_port *port)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
-
- if (up->ier & UART_IER_THRI) {
- up->ier &= ~UART_IER_THRI;
- serial_out(up, UART_IER, up->ier);
- }
-}
-
-static void m32r_sio_start_tx(struct uart_port *port)
-{
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
- struct uart_sio_port *up = (struct uart_sio_port *)port;
- struct circ_buf *xmit = &up->port.state->xmit;
-
- if (!(up->ier & UART_IER_THRI)) {
- up->ier |= UART_IER_THRI;
- serial_out(up, UART_IER, up->ier);
- serial_out(up, UART_TX, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->port.icount.tx++;
- }
- while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY);
-#else
- struct uart_sio_port *up = (struct uart_sio_port *)port;
-
- if (!(up->ier & UART_IER_THRI)) {
- up->ier |= UART_IER_THRI;
- serial_out(up, UART_IER, up->ier);
- }
-#endif
-}
-
-static void m32r_sio_stop_rx(struct uart_port *port)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
-
- up->ier &= ~UART_IER_RLSI;
- up->port.read_status_mask &= ~UART_LSR_DR;
- serial_out(up, UART_IER, up->ier);
-}
-
-static void m32r_sio_enable_ms(struct uart_port *port)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
-
- up->ier |= UART_IER_MSI;
- serial_out(up, UART_IER, up->ier);
-}
-
-static void receive_chars(struct uart_sio_port *up, int *status)
-{
- struct tty_struct *tty = up->port.state->port.tty;
- unsigned char ch;
- unsigned char flag;
- int max_count = 256;
-
- do {
- ch = sio_in(up, SIORXB);
- flag = TTY_NORMAL;
- up->port.icount.rx++;
-
- if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
- UART_LSR_FE | UART_LSR_OE))) {
- /*
- * For statistics only
- */
- if (*status & UART_LSR_BI) {
- *status &= ~(UART_LSR_FE | UART_LSR_PE);
- up->port.icount.brk++;
- /*
- * We do the SysRQ and SAK checking
- * here because otherwise the break
- * may get masked by ignore_status_mask
- * or read_status_mask.
- */
- if (uart_handle_break(&up->port))
- goto ignore_char;
- } else if (*status & UART_LSR_PE)
- up->port.icount.parity++;
- else if (*status & UART_LSR_FE)
- up->port.icount.frame++;
- if (*status & UART_LSR_OE)
- up->port.icount.overrun++;
-
- /*
- * Mask off conditions which should be ingored.
- */
- *status &= up->port.read_status_mask;
-
- if (up->port.line == up->port.cons->index) {
- /* Recover the break flag from console xmit */
- *status |= up->lsr_break_flag;
- up->lsr_break_flag = 0;
- }
-
- if (*status & UART_LSR_BI) {
- DEBUG_INTR("handling break....");
- flag = TTY_BREAK;
- } else if (*status & UART_LSR_PE)
- flag = TTY_PARITY;
- else if (*status & UART_LSR_FE)
- flag = TTY_FRAME;
- }
- if (uart_handle_sysrq_char(&up->port, ch))
- goto ignore_char;
- if ((*status & up->port.ignore_status_mask) == 0)
- tty_insert_flip_char(tty, ch, flag);
-
- if (*status & UART_LSR_OE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
- ignore_char:
- *status = serial_in(up, UART_LSR);
- } while ((*status & UART_LSR_DR) && (max_count-- > 0));
- tty_flip_buffer_push(tty);
-}
-
-static void transmit_chars(struct uart_sio_port *up)
-{
- struct circ_buf *xmit = &up->port.state->xmit;
- int count;
-
- if (up->port.x_char) {
-#ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */
- serial_out(up, UART_TX, up->port.x_char);
-#endif
- up->port.icount.tx++;
- up->port.x_char = 0;
- return;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
- m32r_sio_stop_tx(&up->port);
- return;
- }
-
- count = up->port.fifosize;
- do {
- serial_out(up, UART_TX, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->port.icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- while (!(serial_in(up, UART_LSR) & UART_LSR_THRE));
-
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&up->port);
-
- DEBUG_INTR("THRE...");
-
- if (uart_circ_empty(xmit))
- m32r_sio_stop_tx(&up->port);
-}
-
-/*
- * This handles the interrupt from one port.
- */
-static inline void m32r_sio_handle_port(struct uart_sio_port *up,
- unsigned int status)
-{
- DEBUG_INTR("status = %x...", status);
-
- if (status & 0x04)
- receive_chars(up, &status);
- if (status & 0x01)
- transmit_chars(up);
-}
-
-/*
- * This is the serial driver's interrupt routine.
- *
- * Arjan thinks the old way was overly complex, so it got simplified.
- * Alan disagrees, saying that need the complexity to handle the weird
- * nature of ISA shared interrupts. (This is a special exception.)
- *
- * In order to handle ISA shared interrupts properly, we need to check
- * that all ports have been serviced, and therefore the ISA interrupt
- * line has been de-asserted.
- *
- * This means we need to loop through all ports. checking that they
- * don't have an interrupt pending.
- */
-static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id)
-{
- struct irq_info *i = dev_id;
- struct list_head *l, *end = NULL;
- int pass_counter = 0;
-
- DEBUG_INTR("m32r_sio_interrupt(%d)...", irq);
-
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-// if (irq == PLD_IRQ_SIO0_SND)
-// irq = PLD_IRQ_SIO0_RCV;
-#else
- if (irq == M32R_IRQ_SIO0_S)
- irq = M32R_IRQ_SIO0_R;
-#endif
-
- spin_lock(&i->lock);
-
- l = i->head;
- do {
- struct uart_sio_port *up;
- unsigned int sts;
-
- up = list_entry(l, struct uart_sio_port, list);
-
- sts = sio_in(up, SIOSTS);
- if (sts & 0x5) {
- spin_lock(&up->port.lock);
- m32r_sio_handle_port(up, sts);
- spin_unlock(&up->port.lock);
-
- end = NULL;
- } else if (end == NULL)
- end = l;
-
- l = l->next;
-
- if (l == i->head && pass_counter++ > PASS_LIMIT) {
- if (sts & 0xe0)
- sio_error(&sts);
- break;
- }
- } while (l != end);
-
- spin_unlock(&i->lock);
-
- DEBUG_INTR("end.\n");
-
- return IRQ_HANDLED;
-}
-
-/*
- * To support ISA shared interrupts, we need to have one interrupt
- * handler that ensures that the IRQ line has been deasserted
- * before returning. Failing to do this will result in the IRQ
- * line being stuck active, and, since ISA irqs are edge triggered,
- * no more IRQs will be seen.
- */
-static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up)
-{
- spin_lock_irq(&i->lock);
-
- if (!list_empty(i->head)) {
- if (i->head == &up->list)
- i->head = i->head->next;
- list_del(&up->list);
- } else {
- BUG_ON(i->head != &up->list);
- i->head = NULL;
- }
-
- spin_unlock_irq(&i->lock);
-}
-
-static int serial_link_irq_chain(struct uart_sio_port *up)
-{
- struct irq_info *i = irq_lists + up->port.irq;
- int ret, irq_flags = 0;
-
- spin_lock_irq(&i->lock);
-
- if (i->head) {
- list_add(&up->list, i->head);
- spin_unlock_irq(&i->lock);
-
- ret = 0;
- } else {
- INIT_LIST_HEAD(&up->list);
- i->head = &up->list;
- spin_unlock_irq(&i->lock);
-
- ret = request_irq(up->port.irq, m32r_sio_interrupt,
- irq_flags, "SIO0-RX", i);
- ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt,
- irq_flags, "SIO0-TX", i);
- if (ret < 0)
- serial_do_unlink(i, up);
- }
-
- return ret;
-}
-
-static void serial_unlink_irq_chain(struct uart_sio_port *up)
-{
- struct irq_info *i = irq_lists + up->port.irq;
-
- BUG_ON(i->head == NULL);
-
- if (list_empty(i->head)) {
- free_irq(up->port.irq, i);
- free_irq(up->port.irq + 1, i);
- }
-
- serial_do_unlink(i, up);
-}
-
-/*
- * This function is used to handle ports that do not have an interrupt.
- */
-static void m32r_sio_timeout(unsigned long data)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)data;
- unsigned int timeout;
- unsigned int sts;
-
- sts = sio_in(up, SIOSTS);
- if (sts & 0x5) {
- spin_lock(&up->port.lock);
- m32r_sio_handle_port(up, sts);
- spin_unlock(&up->port.lock);
- }
-
- timeout = up->port.timeout;
- timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
- mod_timer(&up->timer, jiffies + timeout);
-}
-
-static unsigned int m32r_sio_tx_empty(struct uart_port *port)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
- unsigned long flags;
- unsigned int ret;
-
- spin_lock_irqsave(&up->port.lock, flags);
- ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
- spin_unlock_irqrestore(&up->port.lock, flags);
-
- return ret;
-}
-
-static unsigned int m32r_sio_get_mctrl(struct uart_port *port)
-{
- return 0;
-}
-
-static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-
-}
-
-static void m32r_sio_break_ctl(struct uart_port *port, int break_state)
-{
-
-}
-
-static int m32r_sio_startup(struct uart_port *port)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
- int retval;
-
- sio_init();
-
- /*
- * If the "interrupt" for this port doesn't correspond with any
- * hardware interrupt, we use a timer-based system. The original
- * driver used to do this with IRQ0.
- */
- if (!is_real_interrupt(up->port.irq)) {
- unsigned int timeout = up->port.timeout;
-
- timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
-
- up->timer.data = (unsigned long)up;
- mod_timer(&up->timer, jiffies + timeout);
- } else {
- retval = serial_link_irq_chain(up);
- if (retval)
- return retval;
- }
-
- /*
- * Finally, enable interrupts. Note: Modem status interrupts
- * are set via set_termios(), which will be occurring imminently
- * anyway, so we don't enable them here.
- * - M32R_SIO: 0x0c
- * - M32R_PLDSIO: 0x04
- */
- up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
- sio_out(up, SIOTRCR, up->ier);
-
- /*
- * And clear the interrupt registers again for luck.
- */
- sio_reset();
-
- return 0;
-}
-
-static void m32r_sio_shutdown(struct uart_port *port)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
-
- /*
- * Disable interrupts from this port
- */
- up->ier = 0;
- sio_out(up, SIOTRCR, 0);
-
- /*
- * Disable break condition and FIFOs
- */
-
- sio_init();
-
- if (!is_real_interrupt(up->port.irq))
- del_timer_sync(&up->timer);
- else
- serial_unlink_irq_chain(up);
-}
-
-static unsigned int m32r_sio_get_divisor(struct uart_port *port,
- unsigned int baud)
-{
- return uart_get_divisor(port, baud);
-}
-
-static void m32r_sio_set_termios(struct uart_port *port,
- struct ktermios *termios, struct ktermios *old)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
- unsigned char cval = 0;
- unsigned long flags;
- unsigned int baud, quot;
-
- switch (termios->c_cflag & CSIZE) {
- case CS5:
- cval = UART_LCR_WLEN5;
- break;
- case CS6:
- cval = UART_LCR_WLEN6;
- break;
- case CS7:
- cval = UART_LCR_WLEN7;
- break;
- default:
- case CS8:
- cval = UART_LCR_WLEN8;
- break;
- }
-
- if (termios->c_cflag & CSTOPB)
- cval |= UART_LCR_STOP;
- if (termios->c_cflag & PARENB)
- cval |= UART_LCR_PARITY;
- if (!(termios->c_cflag & PARODD))
- cval |= UART_LCR_EPAR;
-#ifdef CMSPAR
- if (termios->c_cflag & CMSPAR)
- cval |= UART_LCR_SPAR;
-#endif
-
- /*
- * Ask the core to calculate the divisor for us.
- */
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4);
-#else
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-#endif
- quot = m32r_sio_get_divisor(port, baud);
-
- /*
- * Ok, we're now changing the port state. Do it with
- * interrupts disabled.
- */
- spin_lock_irqsave(&up->port.lock, flags);
-
- sio_set_baud_rate(baud);
-
- /*
- * Update the per-port timeout.
- */
- uart_update_timeout(port, termios->c_cflag, baud);
-
- up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
- if (termios->c_iflag & INPCK)
- up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (termios->c_iflag & (BRKINT | PARMRK))
- up->port.read_status_mask |= UART_LSR_BI;
-
- /*
- * Characteres to ignore
- */
- up->port.ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
- if (termios->c_iflag & IGNBRK) {
- up->port.ignore_status_mask |= UART_LSR_BI;
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (termios->c_iflag & IGNPAR)
- up->port.ignore_status_mask |= UART_LSR_OE;
- }
-
- /*
- * ignore all characters if CREAD is not set
- */
- if ((termios->c_cflag & CREAD) == 0)
- up->port.ignore_status_mask |= UART_LSR_DR;
-
- /*
- * CTS flow control flag and modem status interrupts
- */
- up->ier &= ~UART_IER_MSI;
- if (UART_ENABLE_MS(&up->port, termios->c_cflag))
- up->ier |= UART_IER_MSI;
-
- serial_out(up, UART_IER, up->ier);
-
- up->lcr = cval; /* Save LCR */
- spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-static void m32r_sio_pm(struct uart_port *port, unsigned int state,
- unsigned int oldstate)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
-
- if (up->pm)
- up->pm(port, state, oldstate);
-}
-
-/*
- * Resource handling. This is complicated by the fact that resources
- * depend on the port type. Maybe we should be claiming the standard
- * 8250 ports, and then trying to get other resources as necessary?
- */
-static int
-m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res)
-{
- unsigned int size = 8 << up->port.regshift;
-#ifndef CONFIG_SERIAL_M32R_PLDSIO
- unsigned long start;
-#endif
- int ret = 0;
-
- switch (up->port.iotype) {
- case UPIO_MEM:
- if (up->port.mapbase) {
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
- *res = request_mem_region(up->port.mapbase, size, "serial");
-#else
- start = up->port.mapbase;
- *res = request_mem_region(start, size, "serial");
-#endif
- if (!*res)
- ret = -EBUSY;
- }
- break;
-
- case UPIO_PORT:
- *res = request_region(up->port.iobase, size, "serial");
- if (!*res)
- ret = -EBUSY;
- break;
- }
- return ret;
-}
-
-static void m32r_sio_release_port(struct uart_port *port)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
- unsigned long start, offset = 0, size = 0;
-
- size <<= up->port.regshift;
-
- switch (up->port.iotype) {
- case UPIO_MEM:
- if (up->port.mapbase) {
- /*
- * Unmap the area.
- */
- iounmap(up->port.membase);
- up->port.membase = NULL;
-
- start = up->port.mapbase;
-
- if (size)
- release_mem_region(start + offset, size);
- release_mem_region(start, 8 << up->port.regshift);
- }
- break;
-
- case UPIO_PORT:
- start = up->port.iobase;
-
- if (size)
- release_region(start + offset, size);
- release_region(start + offset, 8 << up->port.regshift);
- break;
-
- default:
- break;
- }
-}
-
-static int m32r_sio_request_port(struct uart_port *port)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
- struct resource *res = NULL;
- int ret = 0;
-
- ret = m32r_sio_request_std_resource(up, &res);
-
- /*
- * If we have a mapbase, then request that as well.
- */
- if (ret == 0 && up->port.flags & UPF_IOREMAP) {
- int size = resource_size(res);
-
- up->port.membase = ioremap(up->port.mapbase, size);
- if (!up->port.membase)
- ret = -ENOMEM;
- }
-
- if (ret < 0) {
- if (res)
- release_resource(res);
- }
-
- return ret;
-}
-
-static void m32r_sio_config_port(struct uart_port *port, int unused)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
- unsigned long flags;
-
- spin_lock_irqsave(&up->port.lock, flags);
-
- up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1);
- up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
-
- spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-static int
-m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- if (ser->irq >= nr_irqs || ser->irq < 0 ||
- ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
- ser->type >= ARRAY_SIZE(uart_config))
- return -EINVAL;
- return 0;
-}
-
-static const char *
-m32r_sio_type(struct uart_port *port)
-{
- int type = port->type;
-
- if (type >= ARRAY_SIZE(uart_config))
- type = 0;
- return uart_config[type].name;
-}
-
-static struct uart_ops m32r_sio_pops = {
- .tx_empty = m32r_sio_tx_empty,
- .set_mctrl = m32r_sio_set_mctrl,
- .get_mctrl = m32r_sio_get_mctrl,
- .stop_tx = m32r_sio_stop_tx,
- .start_tx = m32r_sio_start_tx,
- .stop_rx = m32r_sio_stop_rx,
- .enable_ms = m32r_sio_enable_ms,
- .break_ctl = m32r_sio_break_ctl,
- .startup = m32r_sio_startup,
- .shutdown = m32r_sio_shutdown,
- .set_termios = m32r_sio_set_termios,
- .pm = m32r_sio_pm,
- .type = m32r_sio_type,
- .release_port = m32r_sio_release_port,
- .request_port = m32r_sio_request_port,
- .config_port = m32r_sio_config_port,
- .verify_port = m32r_sio_verify_port,
-};
-
-static struct uart_sio_port m32r_sio_ports[UART_NR];
-
-static void __init m32r_sio_init_ports(void)
-{
- struct uart_sio_port *up;
- static int first = 1;
- int i;
-
- if (!first)
- return;
- first = 0;
-
- for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port);
- i++, up++) {
- up->port.iobase = old_serial_port[i].port;
- up->port.irq = irq_canonicalize(old_serial_port[i].irq);
- up->port.uartclk = old_serial_port[i].baud_base * 16;
- up->port.flags = old_serial_port[i].flags;
- up->port.membase = old_serial_port[i].iomem_base;
- up->port.iotype = old_serial_port[i].io_type;
- up->port.regshift = old_serial_port[i].iomem_reg_shift;
- up->port.ops = &m32r_sio_pops;
- }
-}
-
-static void __init m32r_sio_register_ports(struct uart_driver *drv)
-{
- int i;
-
- m32r_sio_init_ports();
-
- for (i = 0; i < UART_NR; i++) {
- struct uart_sio_port *up = &m32r_sio_ports[i];
-
- up->port.line = i;
- up->port.ops = &m32r_sio_pops;
- init_timer(&up->timer);
- up->timer.function = m32r_sio_timeout;
-
- up->mcr_mask = ~0;
- up->mcr_force = 0;
-
- uart_add_one_port(drv, &up->port);
- }
-}
-
-#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE
-
-/*
- * Wait for transmitter & holding register to empty
- */
-static inline void wait_for_xmitr(struct uart_sio_port *up)
-{
- unsigned int status, tmout = 10000;
-
- /* Wait up to 10ms for the character(s) to be sent. */
- do {
- status = sio_in(up, SIOSTS);
-
- if (--tmout == 0)
- break;
- udelay(1);
- } while ((status & UART_EMPTY) != UART_EMPTY);
-
- /* Wait up to 1s for flow control if necessary */
- if (up->port.flags & UPF_CONS_FLOW) {
- tmout = 1000000;
- while (--tmout)
- udelay(1);
- }
-}
-
-static void m32r_sio_console_putchar(struct uart_port *port, int ch)
-{
- struct uart_sio_port *up = (struct uart_sio_port *)port;
-
- wait_for_xmitr(up);
- sio_out(up, SIOTXB, ch);
-}
-
-/*
- * Print a string to the serial port trying not to disturb
- * any possible real use of the port...
- *
- * The console_lock must be held when we get here.
- */
-static void m32r_sio_console_write(struct console *co, const char *s,
- unsigned int count)
-{
- struct uart_sio_port *up = &m32r_sio_ports[co->index];
- unsigned int ier;
-
- /*
- * First save the UER then disable the interrupts
- */
- ier = sio_in(up, SIOTRCR);
- sio_out(up, SIOTRCR, 0);
-
- uart_console_write(&up->port, s, count, m32r_sio_console_putchar);
-
- /*
- * Finally, wait for transmitter to become empty
- * and restore the IER
- */
- wait_for_xmitr(up);
- sio_out(up, SIOTRCR, ier);
-}
-
-static int __init m32r_sio_console_setup(struct console *co, char *options)
-{
- struct uart_port *port;
- int baud = 9600;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- /*
- * Check whether an invalid uart number has been specified, and
- * if so, search for the first available port that does have
- * console support.
- */
- if (co->index >= UART_NR)
- co->index = 0;
- port = &m32r_sio_ports[co->index].port;
-
- /*
- * Temporary fix.
- */
- spin_lock_init(&port->lock);
-
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver m32r_sio_reg;
-static struct console m32r_sio_console = {
- .name = "ttyS",
- .write = m32r_sio_console_write,
- .device = uart_console_device,
- .setup = m32r_sio_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &m32r_sio_reg,
-};
-
-static int __init m32r_sio_console_init(void)
-{
- sio_reset();
- sio_init();
- m32r_sio_init_ports();
- register_console(&m32r_sio_console);
- return 0;
-}
-console_initcall(m32r_sio_console_init);
-
-#define M32R_SIO_CONSOLE &m32r_sio_console
-#else
-#define M32R_SIO_CONSOLE NULL
-#endif
-
-static struct uart_driver m32r_sio_reg = {
- .owner = THIS_MODULE,
- .driver_name = "sio",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
- .nr = UART_NR,
- .cons = M32R_SIO_CONSOLE,
-};
-
-/**
- * m32r_sio_suspend_port - suspend one serial port
- * @line: serial line number
- *
- * Suspend one serial port.
- */
-void m32r_sio_suspend_port(int line)
-{
- uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port);
-}
-
-/**
- * m32r_sio_resume_port - resume one serial port
- * @line: serial line number
- *
- * Resume one serial port.
- */
-void m32r_sio_resume_port(int line)
-{
- uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port);
-}
-
-static int __init m32r_sio_init(void)
-{
- int ret, i;
-
- printk(KERN_INFO "Serial: M32R SIO driver\n");
-
- for (i = 0; i < nr_irqs; i++)
- spin_lock_init(&irq_lists[i].lock);
-
- ret = uart_register_driver(&m32r_sio_reg);
- if (ret >= 0)
- m32r_sio_register_ports(&m32r_sio_reg);
-
- return ret;
-}
-
-static void __exit m32r_sio_exit(void)
-{
- int i;
-
- for (i = 0; i < UART_NR; i++)
- uart_remove_one_port(&m32r_sio_reg, &m32r_sio_ports[i].port);
-
- uart_unregister_driver(&m32r_sio_reg);
-}
-
-module_init(m32r_sio_init);
-module_exit(m32r_sio_exit);
-
-EXPORT_SYMBOL(m32r_sio_suspend_port);
-EXPORT_SYMBOL(m32r_sio_resume_port);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Generic M32R SIO serial driver");
+++ /dev/null
-/*
- * m32r_sio.h
- *
- * Driver for M32R serial ports
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- * Based on drivers/serial/8250.h.
- *
- * Copyright (C) 2001 Russell King.
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-
-struct m32r_sio_probe {
- struct module *owner;
- int (*pci_init_one)(struct pci_dev *dev);
- void (*pci_remove_one)(struct pci_dev *dev);
- void (*pnp_init)(void);
-};
-
-int m32r_sio_register_probe(struct m32r_sio_probe *probe);
-void m32r_sio_unregister_probe(struct m32r_sio_probe *probe);
-void m32r_sio_get_irq_map(unsigned int *map);
-void m32r_sio_suspend_port(int line);
-void m32r_sio_resume_port(int line);
-
-struct old_serial_port {
- unsigned int uart;
- unsigned int baud_base;
- unsigned int port;
- unsigned int irq;
- unsigned int flags;
- unsigned char io_type;
- unsigned char __iomem *iomem_base;
- unsigned short iomem_reg_shift;
-};
-
-#define _INLINE_ inline
-
-#define PROBE_RSA (1 << 0)
-#define PROBE_ANY (~0)
-
-#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
+++ /dev/null
-/*
- * m32r_sio_reg.h
- *
- * Copyright (C) 1992, 1994 by Theodore Ts'o.
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- *
- * Redistribution of this file is permitted under the terms of the GNU
- * Public License (GPL)
- *
- * These are the UART port assignments, expressed as offsets from the base
- * register. These assignments should hold for any serial port based on
- * a 8250, 16450, or 16550(A).
- */
-
-#ifndef _M32R_SIO_REG_H
-#define _M32R_SIO_REG_H
-
-
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-
-#define SIOCR 0x000
-#define SIOMOD0 0x002
-#define SIOMOD1 0x004
-#define SIOSTS 0x006
-#define SIOTRCR 0x008
-#define SIOBAUR 0x00a
-// #define SIORBAUR 0x018
-#define SIOTXB 0x00c
-#define SIORXB 0x00e
-
-#define UART_RX ((unsigned long) PLD_ESIO0RXB)
- /* In: Receive buffer (DLAB=0) */
-#define UART_TX ((unsigned long) PLD_ESIO0TXB)
- /* Out: Transmit buffer (DLAB=0) */
-#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
-#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx
- * In: Fifo count
- * Out: Fifo custom trigger levels
- * XR16C85x only */
-
-#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */
-#define UART_IER ((unsigned long) PLD_ESIO0INTCR)
- /* Out: Interrupt Enable Register */
-#define UART_FCTR 0 /* (LCR=BF) Feature Control Register
- * XR16C85x only */
-
-#define UART_IIR 0 /* In: Interrupt ID Register */
-#define UART_FCR 0 /* Out: FIFO Control Register */
-#define UART_EFR 0 /* I/O: Extended Features Register */
- /* (DLAB=1, 16C660 only) */
-
-#define UART_LCR 0 /* Out: Line Control Register */
-#define UART_MCR 0 /* Out: Modem Control Register */
-#define UART_LSR ((unsigned long) PLD_ESIO0STS)
- /* In: Line Status Register */
-#define UART_MSR 0 /* In: Modem Status Register */
-#define UART_SCR 0 /* I/O: Scratch Register */
-#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register
- * FCTR bit 6 selects SCR or EMSR
- * XR16c85x only */
-
-#else /* not CONFIG_SERIAL_M32R_PLDSIO */
-
-#define SIOCR 0x000
-#define SIOMOD0 0x004
-#define SIOMOD1 0x008
-#define SIOSTS 0x00c
-#define SIOTRCR 0x010
-#define SIOBAUR 0x014
-#define SIORBAUR 0x018
-#define SIOTXB 0x01c
-#define SIORXB 0x020
-
-#define UART_RX M32R_SIO0_RXB_PORTL /* In: Receive buffer (DLAB=0) */
-#define UART_TX M32R_SIO0_TXB_PORTL /* Out: Transmit buffer (DLAB=0) */
-#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
-#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx
- * In: Fifo count
- * Out: Fifo custom trigger levels
- * XR16C85x only */
-
-#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */
-#define UART_IER M32R_SIO0_TRCR_PORTL /* Out: Interrupt Enable Register */
-#define UART_FCTR 0 /* (LCR=BF) Feature Control Register
- * XR16C85x only */
-
-#define UART_IIR 0 /* In: Interrupt ID Register */
-#define UART_FCR 0 /* Out: FIFO Control Register */
-#define UART_EFR 0 /* I/O: Extended Features Register */
- /* (DLAB=1, 16C660 only) */
-
-#define UART_LCR 0 /* Out: Line Control Register */
-#define UART_MCR 0 /* Out: Modem Control Register */
-#define UART_LSR M32R_SIO0_STS_PORTL /* In: Line Status Register */
-#define UART_MSR 0 /* In: Modem Status Register */
-#define UART_SCR 0 /* I/O: Scratch Register */
-#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register
- * FCTR bit 6 selects SCR or EMSR
- * XR16c85x only */
-
-#endif /* CONFIG_SERIAL_M32R_PLDSIO */
-
-#define UART_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
-/*
- * These are the definitions for the Line Control Register
- *
- * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
- * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
- */
-#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
-#define UART_LCR_SBC 0x40 /* Set break control */
-#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
-#define UART_LCR_EPAR 0x10 /* Even parity select */
-#define UART_LCR_PARITY 0x08 /* Parity Enable */
-#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */
-#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
-#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
-#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
-#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
-
-/*
- * These are the definitions for the Line Status Register
- */
-#define UART_LSR_TEMT 0x02 /* Transmitter empty */
-#define UART_LSR_THRE 0x01 /* Transmit-hold-register empty */
-#define UART_LSR_BI 0x00 /* Break interrupt indicator */
-#define UART_LSR_FE 0x80 /* Frame error indicator */
-#define UART_LSR_PE 0x40 /* Parity error indicator */
-#define UART_LSR_OE 0x20 /* Overrun error indicator */
-#define UART_LSR_DR 0x04 /* Receiver data ready */
-
-/*
- * These are the definitions for the Interrupt Identification Register
- */
-#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
-#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
-
-#define UART_IIR_MSI 0x00 /* Modem status interrupt */
-#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
-#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
-#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
-
-/*
- * These are the definitions for the Interrupt Enable Register
- */
-#define UART_IER_MSI 0x00 /* Enable Modem status interrupt */
-#define UART_IER_RLSI 0x08 /* Enable receiver line status interrupt */
-#define UART_IER_THRI 0x03 /* Enable Transmitter holding register int. */
-#define UART_IER_RDI 0x04 /* Enable receiver data interrupt */
-
-#endif /* _M32R_SIO_REG_H */
+++ /dev/null
-/*======================================================================
-
- A driver for PCMCIA serial devices
-
- serial_cs.c 1.134 2002/05/04 05:48:53
-
- The contents of this file are subject to the Mozilla Public
- License Version 1.1 (the "License"); you may not use this file
- except in compliance with the License. You may obtain a copy of
- the License at http://www.mozilla.org/MPL/
-
- Software distributed under the License is distributed on an "AS
- IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- implied. See the License for the specific language governing
- rights and limitations under the License.
-
- The initial developer of the original code is David A. Hinds
- <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
-
- Alternatively, the contents of this file may be used under the
- terms of the GNU General Public License version 2 (the "GPL"), in which
- case the provisions of the GPL are applicable instead of the
- above. If you wish to allow the use of your version of this file
- only under the terms of the GPL and not to allow others to use
- your version of this file under the MPL, indicate your decision
- by deleting the provisions above and replace them with the notice
- and other provisions required by the GPL. If you do not delete
- the provisions above, a recipient may use your version of this
- file under either the MPL or the GPL.
-
-======================================================================*/
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/major.h>
-#include <asm/io.h>
-#include <asm/system.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ciscode.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/cisreg.h>
-
-#include "8250.h"
-
-
-/*====================================================================*/
-
-/* Parameters that can be set with 'insmod' */
-
-/* Enable the speaker? */
-static int do_sound = 1;
-/* Skip strict UART tests? */
-static int buggy_uart;
-
-module_param(do_sound, int, 0444);
-module_param(buggy_uart, int, 0444);
-
-/*====================================================================*/
-
-/* Table of multi-port card ID's */
-
-struct serial_quirk {
- unsigned int manfid;
- unsigned int prodid;
- int multi; /* 1 = multifunction, > 1 = # ports */
- void (*config)(struct pcmcia_device *);
- void (*setup)(struct pcmcia_device *, struct uart_port *);
- void (*wakeup)(struct pcmcia_device *);
- int (*post)(struct pcmcia_device *);
-};
-
-struct serial_info {
- struct pcmcia_device *p_dev;
- int ndev;
- int multi;
- int slave;
- int manfid;
- int prodid;
- int c950ctrl;
- int line[4];
- const struct serial_quirk *quirk;
-};
-
-struct serial_cfg_mem {
- tuple_t tuple;
- cisparse_t parse;
- u_char buf[256];
-};
-
-/*
- * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
- * manfid 0x0160, 0x0104
- * This card appears to have a 14.7456MHz clock.
- */
-/* Generic Modem: MD55x (GPRS/EDGE) have
- * Elan VPU16551 UART with 14.7456MHz oscillator
- * manfid 0x015D, 0x4C45
- */
-static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
-{
- port->uartclk = 14745600;
-}
-
-static int quirk_post_ibm(struct pcmcia_device *link)
-{
- u8 val;
- int ret;
-
- ret = pcmcia_read_config_byte(link, 0x800, &val);
- if (ret)
- goto failed;
-
- ret = pcmcia_write_config_byte(link, 0x800, val | 1);
- if (ret)
- goto failed;
- return 0;
-
- failed:
- return -ENODEV;
-}
-
-/*
- * Nokia cards are not really multiport cards. Shouldn't this
- * be handled by setting the quirk entry .multi = 0 | 1 ?
- */
-static void quirk_config_nokia(struct pcmcia_device *link)
-{
- struct serial_info *info = link->priv;
-
- if (info->multi > 1)
- info->multi = 1;
-}
-
-static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
-{
- struct serial_info *info = link->priv;
-
- if (info->c950ctrl)
- outb(12, info->c950ctrl + 1);
-}
-
-/* request_region? oxsemi branch does no request_region too... */
-/*
- * This sequence is needed to properly initialize MC45 attached to OXCF950.
- * I tried decreasing these msleep()s, but it worked properly (survived
- * 1000 stop/start operations) with these timeouts (or bigger).
- */
-static void quirk_wakeup_possio_gcc(struct pcmcia_device *link)
-{
- struct serial_info *info = link->priv;
- unsigned int ctrl = info->c950ctrl;
-
- outb(0xA, ctrl + 1);
- msleep(100);
- outb(0xE, ctrl + 1);
- msleep(300);
- outb(0xC, ctrl + 1);
- msleep(100);
- outb(0xE, ctrl + 1);
- msleep(200);
- outb(0xF, ctrl + 1);
- msleep(100);
- outb(0xE, ctrl + 1);
- msleep(100);
- outb(0xC, ctrl + 1);
-}
-
-/*
- * Socket Dual IO: this enables irq's for second port
- */
-static void quirk_config_socket(struct pcmcia_device *link)
-{
- struct serial_info *info = link->priv;
-
- if (info->multi)
- link->config_flags |= CONF_ENABLE_ESR;
-}
-
-static const struct serial_quirk quirks[] = {
- {
- .manfid = 0x0160,
- .prodid = 0x0104,
- .multi = -1,
- .setup = quirk_setup_brainboxes_0104,
- }, {
- .manfid = 0x015D,
- .prodid = 0x4C45,
- .multi = -1,
- .setup = quirk_setup_brainboxes_0104,
- }, {
- .manfid = MANFID_IBM,
- .prodid = ~0,
- .multi = -1,
- .post = quirk_post_ibm,
- }, {
- .manfid = MANFID_INTEL,
- .prodid = PRODID_INTEL_DUAL_RS232,
- .multi = 2,
- }, {
- .manfid = MANFID_NATINST,
- .prodid = PRODID_NATINST_QUAD_RS232,
- .multi = 4,
- }, {
- .manfid = MANFID_NOKIA,
- .prodid = ~0,
- .multi = -1,
- .config = quirk_config_nokia,
- }, {
- .manfid = MANFID_OMEGA,
- .prodid = PRODID_OMEGA_QSP_100,
- .multi = 4,
- }, {
- .manfid = MANFID_OXSEMI,
- .prodid = ~0,
- .multi = -1,
- .wakeup = quirk_wakeup_oxsemi,
- }, {
- .manfid = MANFID_POSSIO,
- .prodid = PRODID_POSSIO_GCC,
- .multi = -1,
- .wakeup = quirk_wakeup_possio_gcc,
- }, {
- .manfid = MANFID_QUATECH,
- .prodid = PRODID_QUATECH_DUAL_RS232,
- .multi = 2,
- }, {
- .manfid = MANFID_QUATECH,
- .prodid = PRODID_QUATECH_DUAL_RS232_D1,
- .multi = 2,
- }, {
- .manfid = MANFID_QUATECH,
- .prodid = PRODID_QUATECH_DUAL_RS232_G,
- .multi = 2,
- }, {
- .manfid = MANFID_QUATECH,
- .prodid = PRODID_QUATECH_QUAD_RS232,
- .multi = 4,
- }, {
- .manfid = MANFID_SOCKET,
- .prodid = PRODID_SOCKET_DUAL_RS232,
- .multi = 2,
- .config = quirk_config_socket,
- }, {
- .manfid = MANFID_SOCKET,
- .prodid = ~0,
- .multi = -1,
- .config = quirk_config_socket,
- }
-};
-
-
-static int serial_config(struct pcmcia_device * link);
-
-
-static void serial_remove(struct pcmcia_device *link)
-{
- struct serial_info *info = link->priv;
- int i;
-
- dev_dbg(&link->dev, "serial_release\n");
-
- /*
- * Recheck to see if the device is still configured.
- */
- for (i = 0; i < info->ndev; i++)
- serial8250_unregister_port(info->line[i]);
-
- if (!info->slave)
- pcmcia_disable_device(link);
-}
-
-static int serial_suspend(struct pcmcia_device *link)
-{
- struct serial_info *info = link->priv;
- int i;
-
- for (i = 0; i < info->ndev; i++)
- serial8250_suspend_port(info->line[i]);
-
- return 0;
-}
-
-static int serial_resume(struct pcmcia_device *link)
-{
- struct serial_info *info = link->priv;
- int i;
-
- for (i = 0; i < info->ndev; i++)
- serial8250_resume_port(info->line[i]);
-
- if (info->quirk && info->quirk->wakeup)
- info->quirk->wakeup(link);
-
- return 0;
-}
-
-static int serial_probe(struct pcmcia_device *link)
-{
- struct serial_info *info;
-
- dev_dbg(&link->dev, "serial_attach()\n");
-
- /* Create new serial device */
- info = kzalloc(sizeof (*info), GFP_KERNEL);
- if (!info)
- return -ENOMEM;
- info->p_dev = link;
- link->priv = info;
-
- link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
- if (do_sound)
- link->config_flags |= CONF_ENABLE_SPKR;
-
- return serial_config(link);
-}
-
-static void serial_detach(struct pcmcia_device *link)
-{
- struct serial_info *info = link->priv;
-
- dev_dbg(&link->dev, "serial_detach\n");
-
- /*
- * Ensure that the ports have been released.
- */
- serial_remove(link);
-
- /* free bits */
- kfree(info);
-}
-
-/*====================================================================*/
-
-static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
- unsigned int iobase, int irq)
-{
- struct uart_port port;
- int line;
-
- memset(&port, 0, sizeof (struct uart_port));
- port.iobase = iobase;
- port.irq = irq;
- port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
- port.uartclk = 1843200;
- port.dev = &handle->dev;
- if (buggy_uart)
- port.flags |= UPF_BUGGY_UART;
-
- if (info->quirk && info->quirk->setup)
- info->quirk->setup(handle, &port);
-
- line = serial8250_register_port(&port);
- if (line < 0) {
- printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
- "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
- return -EINVAL;
- }
-
- info->line[info->ndev] = line;
- info->ndev++;
-
- return 0;
-}
-
-/*====================================================================*/
-
-static int pfc_config(struct pcmcia_device *p_dev)
-{
- unsigned int port = 0;
- struct serial_info *info = p_dev->priv;
-
- if ((p_dev->resource[1]->end != 0) &&
- (resource_size(p_dev->resource[1]) == 8)) {
- port = p_dev->resource[1]->start;
- info->slave = 1;
- } else if ((info->manfid == MANFID_OSITECH) &&
- (resource_size(p_dev->resource[0]) == 0x40)) {
- port = p_dev->resource[0]->start + 0x28;
- info->slave = 1;
- }
- if (info->slave)
- return setup_serial(p_dev, info, port, p_dev->irq);
-
- dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
- return -ENODEV;
-}
-
-static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data)
-{
- static const int size_table[2] = { 8, 16 };
- int *try = priv_data;
-
- if (p_dev->resource[0]->start == 0)
- return -ENODEV;
-
- if ((*try & 0x1) == 0)
- p_dev->io_lines = 16;
-
- if (p_dev->resource[0]->end != size_table[(*try >> 1)])
- return -ENODEV;
-
- p_dev->resource[0]->end = 8;
- p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-
- return pcmcia_request_io(p_dev);
-}
-
-static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
- void *priv_data)
-{
- static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
- int j;
-
- if (p_dev->io_lines > 3)
- return -ENODEV;
-
- p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
- p_dev->resource[0]->end = 8;
-
- for (j = 0; j < 5; j++) {
- p_dev->resource[0]->start = base[j];
- p_dev->io_lines = base[j] ? 16 : 3;
- if (!pcmcia_request_io(p_dev))
- return 0;
- }
- return -ENODEV;
-}
-
-static int simple_config(struct pcmcia_device *link)
-{
- struct serial_info *info = link->priv;
- int i = -ENODEV, try;
-
- /* First pass: look for a config entry that looks normal.
- * Two tries: without IO aliases, then with aliases */
- link->config_flags |= CONF_AUTO_SET_VPP;
- for (try = 0; try < 4; try++)
- if (!pcmcia_loop_config(link, simple_config_check, &try))
- goto found_port;
-
- /* Second pass: try to find an entry that isn't picky about
- its base address, then try to grab any standard serial port
- address, and finally try to get any free port. */
- if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
- goto found_port;
-
- dev_warn(&link->dev, "no usable port range found, giving up\n");
- return -1;
-
-found_port:
- if (info->multi && (info->manfid == MANFID_3COM))
- link->config_index &= ~(0x08);
-
- /*
- * Apply any configuration quirks.
- */
- if (info->quirk && info->quirk->config)
- info->quirk->config(link);
-
- i = pcmcia_enable_device(link);
- if (i != 0)
- return -1;
- return setup_serial(link, info, link->resource[0]->start, link->irq);
-}
-
-static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data)
-{
- int *multi = priv_data;
-
- if (p_dev->resource[1]->end)
- return -EINVAL;
-
- /* The quad port cards have bad CIS's, so just look for a
- window larger than 8 ports and assume it will be right */
- if (p_dev->resource[0]->end <= 8)
- return -EINVAL;
-
- p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
- p_dev->resource[0]->end = *multi * 8;
-
- if (pcmcia_request_io(p_dev))
- return -ENODEV;
- return 0;
-}
-
-static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
- void *priv_data)
-{
- int *base2 = priv_data;
-
- if (!p_dev->resource[0]->end || !p_dev->resource[1]->end ||
- p_dev->resource[0]->start + 8 != p_dev->resource[1]->start)
- return -ENODEV;
-
- p_dev->resource[0]->end = p_dev->resource[1]->end = 8;
- p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-
- if (pcmcia_request_io(p_dev))
- return -ENODEV;
-
- *base2 = p_dev->resource[0]->start + 8;
- return 0;
-}
-
-static int multi_config(struct pcmcia_device *link)
-{
- struct serial_info *info = link->priv;
- int i, base2 = 0;
-
- /* First, look for a generic full-sized window */
- if (!pcmcia_loop_config(link, multi_config_check, &info->multi))
- base2 = link->resource[0]->start + 8;
- else {
- /* If that didn't work, look for two windows */
- info->multi = 2;
- if (pcmcia_loop_config(link, multi_config_check_notpicky,
- &base2)) {
- dev_warn(&link->dev, "no usable port range "
- "found, giving up\n");
- return -ENODEV;
- }
- }
-
- if (!link->irq)
- dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
-
- /*
- * Apply any configuration quirks.
- */
- if (info->quirk && info->quirk->config)
- info->quirk->config(link);
-
- i = pcmcia_enable_device(link);
- if (i != 0)
- return -ENODEV;
-
- /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
- * 8 registers are for the UART, the others are extra registers.
- * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
- */
- if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
- info->prodid == PRODID_POSSIO_GCC)) {
- int err;
-
- if (link->config_index == 1 ||
- link->config_index == 3) {
- err = setup_serial(link, info, base2,
- link->irq);
- base2 = link->resource[0]->start;
- } else {
- err = setup_serial(link, info, link->resource[0]->start,
- link->irq);
- }
- info->c950ctrl = base2;
-
- /*
- * FIXME: We really should wake up the port prior to
- * handing it over to the serial layer.
- */
- if (info->quirk && info->quirk->wakeup)
- info->quirk->wakeup(link);
-
- return 0;
- }
-
- setup_serial(link, info, link->resource[0]->start, link->irq);
- for (i = 0; i < info->multi - 1; i++)
- setup_serial(link, info, base2 + (8 * i),
- link->irq);
- return 0;
-}
-
-static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data)
-{
- struct serial_info *info = p_dev->priv;
-
- if (!p_dev->resource[0]->end)
- return -EINVAL;
-
- if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0))
- info->multi = p_dev->resource[0]->end >> 3;
-
- if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8)
- && (p_dev->resource[1]->end == 8))
- info->multi = 2;
-
- return 0; /* break */
-}
-
-
-static int serial_config(struct pcmcia_device * link)
-{
- struct serial_info *info = link->priv;
- int i;
-
- dev_dbg(&link->dev, "serial_config\n");
-
- /* Is this a compliant multifunction card? */
- info->multi = (link->socket->functions > 1);
-
- /* Is this a multiport card? */
- info->manfid = link->manf_id;
- info->prodid = link->card_id;
-
- for (i = 0; i < ARRAY_SIZE(quirks); i++)
- if ((quirks[i].manfid == ~0 ||
- quirks[i].manfid == info->manfid) &&
- (quirks[i].prodid == ~0 ||
- quirks[i].prodid == info->prodid)) {
- info->quirk = &quirks[i];
- break;
- }
-
- /* Another check for dual-serial cards: look for either serial or
- multifunction cards that ask for appropriate IO port ranges */
- if ((info->multi == 0) &&
- (link->has_func_id) &&
- (link->socket->pcmcia_pfc == 0) &&
- ((link->func_id == CISTPL_FUNCID_MULTI) ||
- (link->func_id == CISTPL_FUNCID_SERIAL)))
- pcmcia_loop_config(link, serial_check_for_multi, info);
-
- /*
- * Apply any multi-port quirk.
- */
- if (info->quirk && info->quirk->multi != -1)
- info->multi = info->quirk->multi;
-
- dev_info(&link->dev,
- "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
- link->manf_id, link->card_id,
- link->socket->pcmcia_pfc, info->multi, info->quirk);
- if (link->socket->pcmcia_pfc)
- i = pfc_config(link);
- else if (info->multi > 1)
- i = multi_config(link);
- else
- i = simple_config(link);
-
- if (i || info->ndev == 0)
- goto failed;
-
- /*
- * Apply any post-init quirk. FIXME: This should really happen
- * before we register the port, since it might already be in use.
- */
- if (info->quirk && info->quirk->post)
- if (info->quirk->post(link))
- goto failed;
-
- return 0;
-
-failed:
- dev_warn(&link->dev, "failed to initialize\n");
- serial_remove(link);
- return -ENODEV;
-}
-
-static const struct pcmcia_device_id serial_ids[] = {
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
- PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
- PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
- PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
- PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
- PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
- PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
- PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
- PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
- PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
- PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
- PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
- PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
- PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
- PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
- PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
- PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
- PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
- PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
- PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
- PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
- PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
- PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
- PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
- PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */
- PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */
- PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */
- PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
- PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */
- PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
- PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
- PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
- PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
- PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
- PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */
- PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */
- PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */
- PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
- PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
- PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
- PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
- PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
- PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
- PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
- PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
- PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
- PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
- PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
- PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
- PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
- PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
- PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
- PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
- PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
- PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
- PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
- PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
- PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b),
- PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
- PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
- PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447),
- PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
- PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
- PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
- PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
- PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
- PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
- PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
- PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
- PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38),
- PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292),
- PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
- PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
- PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
- PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
- PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
- PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
- PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
- PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
- PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
- PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
- PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
- PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
- PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
- PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
- PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
- PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
- PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
- PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767),
- PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
- PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
- PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
- PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
- PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
- PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
- PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
- PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
- PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
- PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
- PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
- PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
- /* too generic */
- /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
- /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
- PCMCIA_DEVICE_FUNC_ID(2),
- PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, serial_ids);
-
-MODULE_FIRMWARE("cis/PCMLM28.cis");
-MODULE_FIRMWARE("cis/DP83903.cis");
-MODULE_FIRMWARE("cis/3CCFEM556.cis");
-MODULE_FIRMWARE("cis/3CXEM556.cis");
-MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
-MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
-MODULE_FIRMWARE("cis/SW_555_SER.cis");
-MODULE_FIRMWARE("cis/MT5634ZLX.cis");
-MODULE_FIRMWARE("cis/COMpad2.cis");
-MODULE_FIRMWARE("cis/COMpad4.cis");
-MODULE_FIRMWARE("cis/RS-COM-2P.cis");
-
-static struct pcmcia_driver serial_cs_driver = {
- .owner = THIS_MODULE,
- .name = "serial_cs",
- .probe = serial_probe,
- .remove = serial_detach,
- .id_table = serial_ids,
- .suspend = serial_suspend,
- .resume = serial_resume,
-};
-
-static int __init init_serial_cs(void)
-{
- return pcmcia_register_driver(&serial_cs_driver);
-}
-
-static void __exit exit_serial_cs(void)
-{
- pcmcia_unregister_driver(&serial_cs_driver);
-}
-
-module_init(init_serial_cs);
-module_exit(exit_serial_cs);
-
-MODULE_LICENSE("GPL");
projects / firefly-linux-kernel-4.4.55.git / commitdiff