mtd: r852: remove useless pci powerup/down from suspend/resume routines
authorMaxim Levitsky <maximlevitsky@gmail.com>
Fri, 15 Oct 2010 15:20:46 +0000 (17:20 +0200)
committerDavid Woodhouse <David.Woodhouse@intel.com>
Mon, 25 Oct 2010 00:32:21 +0000 (01:32 +0100)
It turns out that pci core now handles these, so this code is redundant
and can even cause bugs

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
drivers/mtd/nand/r852.c
drivers/mtd/nand/r852.h

index 5169ca6a66bcdf55df5033c1868b17964df83888..d9d7efbc77cc496bc49c4da371d78c69c2e10b51 100644 (file)
@@ -757,11 +757,6 @@ static irqreturn_t r852_irq(int irq, void *data)
 
        spin_lock_irqsave(&dev->irqlock, flags);
 
-       /* We can recieve shared interrupt while pci is suspended
-               in that case reads will return 0xFFFFFFFF.... */
-       if (dev->insuspend)
-               goto out;
-
        /* handle card detection interrupts first */
        card_status = r852_read_reg(dev, R852_CARD_IRQ_STA);
        r852_write_reg(dev, R852_CARD_IRQ_STA, card_status);
@@ -1035,7 +1030,6 @@ void r852_shutdown(struct pci_dev *pci_dev)
 int r852_suspend(struct device *device)
 {
        struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
-       unsigned long flags;
 
        if (dev->ctlreg & R852_CTL_CARDENABLE)
                return -EBUSY;
@@ -1047,43 +1041,22 @@ int r852_suspend(struct device *device)
        r852_disable_irqs(dev);
        r852_engine_disable(dev);
 
-       spin_lock_irqsave(&dev->irqlock, flags);
-       dev->insuspend = 1;
-       spin_unlock_irqrestore(&dev->irqlock, flags);
-
-       /* At that point, even if interrupt handler is running, it will quit */
-       /* So wait for this to happen explictly */
-       synchronize_irq(dev->irq);
-
        /* If card was pulled off just during the suspend, which is very
                unlikely, we will remove it on resume, it too late now
                anyway... */
        dev->card_unstable = 0;
-
-       pci_save_state(to_pci_dev(device));
-       return pci_prepare_to_sleep(to_pci_dev(device));
+       return 0;
 }
 
 int r852_resume(struct device *device)
 {
        struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
-       unsigned long flags;
-
-       /* Turn on the hardware */
-       pci_back_from_sleep(to_pci_dev(device));
-       pci_restore_state(to_pci_dev(device));
 
        r852_disable_irqs(dev);
        r852_card_update_present(dev);
        r852_engine_disable(dev);
 
 
-       /* Now its safe for IRQ to run */
-       spin_lock_irqsave(&dev->irqlock, flags);
-       dev->insuspend = 0;
-       spin_unlock_irqrestore(&dev->irqlock, flags);
-
-
        /* If card status changed, just do the work */
        if (dev->card_detected != dev->card_registred) {
                dbg("card was %s during low power state",
@@ -1121,7 +1094,6 @@ MODULE_DEVICE_TABLE(pci, r852_pci_id_tbl);
 
 SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
 
-
 static struct pci_driver r852_pci_driver = {
        .name           = DRV_NAME,
        .id_table       = r852_pci_id_tbl,
index 8096cc280c73a835170e542c9ce1a097002aca85..e6a21d9d22c60f6829f088a882eff096d7069bff 100644 (file)
@@ -140,8 +140,6 @@ struct r852_device {
        /* interrupt handling */
        spinlock_t irqlock;             /* IRQ protecting lock */
        int irq;                        /* irq num */
-       int insuspend;                  /* device is suspended */
-
        /* misc */
        void *tmp_buffer;               /* temporary buffer */
        uint8_t ctlreg;                 /* cached contents of control reg */