USB: s3c-hsotg: Fix stall condition processing
authorAnton Tikhomirov <av.tikhomirov@samsung.com>
Thu, 21 Apr 2011 08:06:41 +0000 (17:06 +0900)
committerGreg Kroah-Hartman <gregkh@suse.de>
Tue, 3 May 2011 00:00:26 +0000 (17:00 -0700)
The following should be done for requests after endpoint stall
condition is cleared:
1) 'in progress' request (if any) should be completed since
   Tx FIFO was flushed;
2) next request from queue (if any) should be started.

This commit does that.

Additionally set/clear stall condition code is fixed.

Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com>
Reviewed-by: Kyoungil Kim<ki0351.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/gadget/s3c-hsotg.c

index cbbc33677fd457ef7d66239fcc238e816bd47c90..6be424e2cc6043184f387e5faee21814824d40a9 100644 (file)
@@ -679,6 +679,14 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
                __func__, readl(hsotg->regs + epctrl_reg), index,
                hs_ep->dir_in ? "in" : "out");
 
+       /* If endpoint is stalled, we will restart request later */
+       ctrl = readl(hsotg->regs + epctrl_reg);
+
+       if (ctrl & S3C_DxEPCTL_Stall) {
+               dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index);
+               return;
+       }
+
        length = ureq->length - ureq->actual;
 
        if (0)
@@ -731,18 +739,6 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
        /* write size / packets */
        writel(epsize, hsotg->regs + epsize_reg);
 
-       ctrl = readl(hsotg->regs + epctrl_reg);
-
-       if (ctrl & S3C_DxEPCTL_Stall) {
-               dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index);
-
-               /* not sure what we can do here, if it is EP0 then we should
-                * get this cleared once the endpoint has transmitted the
-                * STALL packet, otherwise it needs to be cleared by the
-                * host.
-                */
-       }
-
        if (using_dma(hsotg)) {
                unsigned int dma_reg;
 
@@ -1047,6 +1043,20 @@ static int s3c_hsotg_process_req_status(struct s3c_hsotg *hsotg,
 
 static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value);
 
+/**
+ * get_ep_head - return the first request on the endpoint
+ * @hs_ep: The controller endpoint to get
+ *
+ * Get the first request on the endpoint.
+ */
+static struct s3c_hsotg_req *get_ep_head(struct s3c_hsotg_ep *hs_ep)
+{
+       if (list_empty(&hs_ep->queue))
+               return NULL;
+
+       return list_first_entry(&hs_ep->queue, struct s3c_hsotg_req, queue);
+}
+
 /**
  * s3c_hsotg_process_req_featire - process request {SET,CLEAR}_FEATURE
  * @hsotg: The device state
@@ -1056,6 +1066,8 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
                                         struct usb_ctrlrequest *ctrl)
 {
        struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
+       struct s3c_hsotg_req *hs_req;
+       bool restart;
        bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
        struct s3c_hsotg_ep *ep;
        int ret;
@@ -1081,6 +1093,29 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
                                        "%s: failed to send reply\n", __func__);
                                return ret;
                        }
+
+                       if (!set) {
+                               /*
+                                * If we have request in progress,
+                                * then complete it
+                                */
+                               if (ep->req) {
+                                       hs_req = ep->req;
+                                       ep->req = NULL;
+                                       list_del_init(&hs_req->queue);
+                                       hs_req->req.complete(&ep->ep,
+                                                            &hs_req->req);
+                               }
+
+                               /* If we have pending request, then start it */
+                               restart = !list_empty(&ep->queue);
+                               if (restart) {
+                                       hs_req = get_ep_head(ep);
+                                       s3c_hsotg_start_req(hsotg, ep,
+                                                           hs_req, false);
+                               }
+                       }
+
                        break;
 
                default:
@@ -1247,20 +1282,6 @@ static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg)
        }
 }
 
-/**
- * get_ep_head - return the first request on the endpoint
- * @hs_ep: The controller endpoint to get
- *
- * Get the first request on the endpoint.
-*/
-static struct s3c_hsotg_req *get_ep_head(struct s3c_hsotg_ep *hs_ep)
-{
-       if (list_empty(&hs_ep->queue))
-               return NULL;
-
-       return list_first_entry(&hs_ep->queue, struct s3c_hsotg_req, queue);
-}
-
 /**
  * s3c_hsotg_complete_request - complete a request given to us
  * @hsotg: The device state.
@@ -1684,6 +1705,37 @@ bad_mps:
        dev_err(hsotg->dev, "ep%d: bad mps of %d\n", ep, mps);
 }
 
+/**
+ * s3c_hsotg_txfifo_flush - flush Tx FIFO
+ * @hsotg: The driver state
+ * @idx: The index for the endpoint (0..15)
+ */
+static void s3c_hsotg_txfifo_flush(struct s3c_hsotg *hsotg, unsigned int idx)
+{
+       int timeout;
+       int val;
+
+       writel(S3C_GRSTCTL_TxFNum(idx) | S3C_GRSTCTL_TxFFlsh,
+               hsotg->regs + S3C_GRSTCTL);
+
+       /* wait until the fifo is flushed */
+       timeout = 100;
+
+       while (1) {
+               val = readl(hsotg->regs + S3C_GRSTCTL);
+
+               if ((val & (S3C_GRSTCTL_TxFFlsh)) == 0)
+                       break;
+
+               if (--timeout == 0) {
+                       dev_err(hsotg->dev,
+                               "%s: timeout flushing fifo (GRSTCTL=%08x)\n",
+                               __func__, val);
+               }
+
+               udelay(1);
+       }
+}
 
 /**
  * s3c_hsotg_trytx - check to see if anything needs transmitting
@@ -1806,9 +1858,24 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
                }
        }
 
-       if (ints & S3C_DxEPINT_EPDisbld)
+       if (ints & S3C_DxEPINT_EPDisbld) {
                dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__);
 
+               if (dir_in) {
+                       int epctl = readl(hsotg->regs + epctl_reg);
+
+                       s3c_hsotg_txfifo_flush(hsotg, idx);
+
+                       if ((epctl & S3C_DxEPCTL_Stall) &&
+                               (epctl & S3C_DxEPCTL_EPType_Bulk)) {
+                               int dctl = readl(hsotg->regs + S3C_DCTL);
+
+                               dctl |= S3C_DCTL_CGNPInNAK;
+                               writel(dctl, hsotg->regs + S3C_DCTL);
+                       }
+               }
+       }
+
        if (ints & S3C_DxEPINT_AHBErr)
                dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__);
 
@@ -2406,6 +2473,7 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
        unsigned long irqflags;
        u32 epreg;
        u32 epctl;
+       u32 xfertype;
 
        dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value);
 
@@ -2416,10 +2484,17 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
        epreg = S3C_DIEPCTL(index);
        epctl = readl(hs->regs + epreg);
 
-       if (value)
-               epctl |= S3C_DxEPCTL_Stall;
-       else
+       if (value) {
+               epctl |= S3C_DxEPCTL_Stall + S3C_DxEPCTL_SNAK;
+               if (epctl & S3C_DxEPCTL_EPEna)
+                       epctl |= S3C_DxEPCTL_EPDis;
+       } else {
                epctl &= ~S3C_DxEPCTL_Stall;
+               xfertype = epctl & S3C_DxEPCTL_EPType_MASK;
+               if (xfertype == S3C_DxEPCTL_EPType_Bulk ||
+                       xfertype == S3C_DxEPCTL_EPType_Intterupt)
+                               epctl |= S3C_DxEPCTL_SetD0PID;
+       }
 
        writel(epctl, hs->regs + epreg);
 
@@ -2428,8 +2503,13 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
 
        if (value)
                epctl |= S3C_DxEPCTL_Stall;
-       else
+       else {
                epctl &= ~S3C_DxEPCTL_Stall;
+               xfertype = epctl & S3C_DxEPCTL_EPType_MASK;
+               if (xfertype == S3C_DxEPCTL_EPType_Bulk ||
+                       xfertype == S3C_DxEPCTL_EPType_Intterupt)
+                               epctl |= S3C_DxEPCTL_SetD0PID;
+       }
 
        writel(epctl, hs->regs + epreg);