[media] cx231xx: use own i2c_client for eeprom access
authorMatthias Schwarzott <zzam@gentoo.org>
Thu, 2 Oct 2014 05:20:54 +0000 (02:20 -0300)
committerMauro Carvalho Chehab <mchehab@osg.samsung.com>
Thu, 30 Oct 2014 19:10:13 +0000 (17:10 -0200)
This is a preparation for deleting the otherwise useless i2c_clients
that are allocated for all the i2c master adapters.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/usb/cx231xx/cx231xx-cards.c

index 791f00c6276b1e489e38f019d4e7bbe40362a0e2..092fb85ae166add1600003a945b3c172877142ec 100644 (file)
@@ -980,23 +980,20 @@ static void cx231xx_config_tuner(struct cx231xx *dev)
 
 }
 
-static int read_eeprom(struct cx231xx *dev, u8 *eedata, int len)
+static int read_eeprom(struct cx231xx *dev, struct i2c_client *client,
+                      u8 *eedata, int len)
 {
        int ret = 0;
-       u8 addr = 0xa0 >> 1;
        u8 start_offset = 0;
        int len_todo = len;
        u8 *eedata_cur = eedata;
        int i;
-       struct i2c_msg msg_write = { .addr = addr, .flags = 0,
+       struct i2c_msg msg_write = { .addr = client->addr, .flags = 0,
                .buf = &start_offset, .len = 1 };
-       struct i2c_msg msg_read = { .addr = addr, .flags = I2C_M_RD };
-
-       /* mutex_lock(&dev->i2c_lock); */
-       cx231xx_enable_i2c_port_3(dev, false);
+       struct i2c_msg msg_read = { .addr = client->addr, .flags = I2C_M_RD };
 
        /* start reading at offset 0 */
-       ret = i2c_transfer(&dev->i2c_bus[1].i2c_adap, &msg_write, 1);
+       ret = i2c_transfer(client->adapter, &msg_write, 1);
        if (ret < 0) {
                cx231xx_err("Can't read eeprom\n");
                return ret;
@@ -1006,7 +1003,7 @@ static int read_eeprom(struct cx231xx *dev, u8 *eedata, int len)
                msg_read.len = (len_todo > 64) ? 64 : len_todo;
                msg_read.buf = eedata_cur;
 
-               ret = i2c_transfer(&dev->i2c_bus[1].i2c_adap, &msg_read, 1);
+               ret = i2c_transfer(client->adapter, &msg_read, 1);
                if (ret < 0) {
                        cx231xx_err("Can't read eeprom\n");
                        return ret;
@@ -1062,9 +1059,14 @@ void cx231xx_card_setup(struct cx231xx *dev)
                {
                        struct tveeprom tvee;
                        static u8 eeprom[256];
+                       struct i2c_client client;
+
+                       memset(&client, 0, sizeof(client));
+                       client.adapter = &dev->i2c_bus[1].i2c_adap;
+                       client.addr = 0xa0 >> 1;
 
-                       read_eeprom(dev, eeprom, sizeof(eeprom));
-                       tveeprom_hauppauge_analog(&dev->i2c_bus[1].i2c_client,
+                       read_eeprom(dev, &client, eeprom, sizeof(eeprom));
+                       tveeprom_hauppauge_analog(&client,
                                                &tvee, eeprom + 0xc0);
                        break;
                }