x86/mm/pat: Emulate PAT when it is disabled
authorBorislav Petkov <bp@suse.de>
Thu, 4 Jun 2015 16:55:10 +0000 (18:55 +0200)
committerIngo Molnar <mingo@kernel.org>
Sun, 7 Jun 2015 13:28:52 +0000 (15:28 +0200)
In the case when PAT is disabled on the command line with
"nopat" or when virtualization doesn't support PAT (correctly) -
see

  9d34cfdf4796 ("x86: Don't rely on VMWare emulating PAT MSR correctly").

we emulate it using the PWT and PCD cache attribute bits. Get
rid of boot_pat_state while at it.

Based on a conglomerate patch from Toshi Kani.

Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: stefan.bader@canonical.com
Cc: yigal@plexistor.com
Link: http://lkml.kernel.org/r/1433436928-31903-3-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
arch/x86/include/asm/pat.h
arch/x86/mm/init.c
arch/x86/mm/pat.c
arch/x86/xen/enlighten.c

index cdcff7f7f6941eb20797bd8b9b4a7e5ac0930491..ca6c228d5e62837be88984b652bb436949295d03 100644 (file)
@@ -6,7 +6,7 @@
 
 bool pat_enabled(void);
 extern void pat_init(void);
-void pat_init_cache_modes(void);
+void pat_init_cache_modes(u64);
 
 extern int reserve_memtype(u64 start, u64 end,
                enum page_cache_mode req_pcm, enum page_cache_mode *ret_pcm);
index 1d553186c4345c02be5c0152764d988cfe365ae1..8533b46e6bee565e242f8ea339d892b65206c97d 100644 (file)
@@ -40,7 +40,7 @@
  */
 uint16_t __cachemode2pte_tbl[_PAGE_CACHE_MODE_NUM] = {
        [_PAGE_CACHE_MODE_WB      ]     = 0         | 0        ,
-       [_PAGE_CACHE_MODE_WC      ]     = _PAGE_PWT | 0        ,
+       [_PAGE_CACHE_MODE_WC      ]     = 0         | _PAGE_PCD,
        [_PAGE_CACHE_MODE_UC_MINUS]     = 0         | _PAGE_PCD,
        [_PAGE_CACHE_MODE_UC      ]     = _PAGE_PWT | _PAGE_PCD,
        [_PAGE_CACHE_MODE_WT      ]     = 0         | _PAGE_PCD,
@@ -50,11 +50,11 @@ EXPORT_SYMBOL(__cachemode2pte_tbl);
 
 uint8_t __pte2cachemode_tbl[8] = {
        [__pte2cm_idx( 0        | 0         | 0        )] = _PAGE_CACHE_MODE_WB,
-       [__pte2cm_idx(_PAGE_PWT | 0         | 0        )] = _PAGE_CACHE_MODE_WC,
+       [__pte2cm_idx(_PAGE_PWT | 0         | 0        )] = _PAGE_CACHE_MODE_UC_MINUS,
        [__pte2cm_idx( 0        | _PAGE_PCD | 0        )] = _PAGE_CACHE_MODE_UC_MINUS,
        [__pte2cm_idx(_PAGE_PWT | _PAGE_PCD | 0        )] = _PAGE_CACHE_MODE_UC,
        [__pte2cm_idx( 0        | 0         | _PAGE_PAT)] = _PAGE_CACHE_MODE_WB,
-       [__pte2cm_idx(_PAGE_PWT | 0         | _PAGE_PAT)] = _PAGE_CACHE_MODE_WC,
+       [__pte2cm_idx(_PAGE_PWT | 0         | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC_MINUS,
        [__pte2cm_idx(0         | _PAGE_PCD | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC_MINUS,
        [__pte2cm_idx(_PAGE_PWT | _PAGE_PCD | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC,
 };
index 476d0780560f2c980dbae99f22ffef113a8bf806..6dc7826e4797fd656ea9c19765c6fac8788ed848 100644 (file)
@@ -68,8 +68,6 @@ static int __init pat_debug_setup(char *str)
 }
 __setup("debugpat", pat_debug_setup);
 
-static u64 __read_mostly boot_pat_state;
-
 #ifdef CONFIG_X86_PAT
 /*
  * X86 PAT uses page flags WC and Uncached together to keep track of
@@ -177,14 +175,12 @@ static enum page_cache_mode pat_get_cache_mode(unsigned pat_val, char *msg)
  * configuration.
  * Using lower indices is preferred, so we start with highest index.
  */
-void pat_init_cache_modes(void)
+void pat_init_cache_modes(u64 pat)
 {
-       int i;
        enum page_cache_mode cache;
        char pat_msg[33];
-       u64 pat;
+       int i;
 
-       rdmsrl(MSR_IA32_CR_PAT, pat);
        pat_msg[32] = 0;
        for (i = 7; i >= 0; i--) {
                cache = pat_get_cache_mode((pat >> (i * 8)) & 7,
@@ -198,24 +194,33 @@ void pat_init_cache_modes(void)
 
 static void pat_bsp_init(u64 pat)
 {
+       u64 tmp_pat;
+
        if (!cpu_has_pat) {
                pat_disable("PAT not supported by CPU.");
                return;
        }
 
-       rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
-       if (!boot_pat_state) {
+       if (!pat_enabled())
+               goto done;
+
+       rdmsrl(MSR_IA32_CR_PAT, tmp_pat);
+       if (!tmp_pat) {
                pat_disable("PAT MSR is 0, disabled.");
                return;
        }
 
        wrmsrl(MSR_IA32_CR_PAT, pat);
 
-       pat_init_cache_modes();
+done:
+       pat_init_cache_modes(pat);
 }
 
 static void pat_ap_init(u64 pat)
 {
+       if (!pat_enabled())
+               return;
+
        if (!cpu_has_pat) {
                /*
                 * If this happens we are on a secondary CPU, but switched to
@@ -231,25 +236,45 @@ void pat_init(void)
 {
        u64 pat;
 
-       if (!pat_enabled())
-               return;
-
-       /*
-        * Set PWT to Write-Combining. All other bits stay the same:
-        *
-        * PTE encoding used in Linux:
-        *      PAT
-        *      |PCD
-        *      ||PWT
-        *      |||
-        *      000 WB          _PAGE_CACHE_WB
-        *      001 WC          _PAGE_CACHE_WC
-        *      010 UC-         _PAGE_CACHE_UC_MINUS
-        *      011 UC          _PAGE_CACHE_UC
-        * PAT bit unused
-        */
-       pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) |
-             PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, UC);
+       if (!pat_enabled()) {
+               /*
+                * No PAT. Emulate the PAT table that corresponds to the two
+                * cache bits, PWT (Write Through) and PCD (Cache Disable). This
+                * setup is the same as the BIOS default setup when the system
+                * has PAT but the "nopat" boot option has been specified. This
+                * emulated PAT table is used when MSR_IA32_CR_PAT returns 0.
+                *
+                * PTE encoding used:
+                *
+                *       PCD
+                *       |PWT  PAT
+                *       ||    slot
+                *       00    0    WB : _PAGE_CACHE_MODE_WB
+                *       01    1    WT : _PAGE_CACHE_MODE_WT
+                *       10    2    UC-: _PAGE_CACHE_MODE_UC_MINUS
+                *       11    3    UC : _PAGE_CACHE_MODE_UC
+                *
+                * NOTE: When WC or WP is used, it is redirected to UC- per
+                * the default setup in __cachemode2pte_tbl[].
+                */
+               pat = PAT(0, WB) | PAT(1, WT) | PAT(2, UC_MINUS) | PAT(3, UC) |
+                     PAT(4, WB) | PAT(5, WT) | PAT(6, UC_MINUS) | PAT(7, UC);
+       } else {
+               /*
+                * PTE encoding used in Linux:
+                *      PAT
+                *      |PCD
+                *      ||PWT
+                *      |||
+                *      000 WB          _PAGE_CACHE_WB
+                *      001 WC          _PAGE_CACHE_WC
+                *      010 UC-         _PAGE_CACHE_UC_MINUS
+                *      011 UC          _PAGE_CACHE_UC
+                * PAT bit unused
+                */
+               pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) |
+                     PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, UC);
+       }
 
        if (!boot_cpu_done) {
                pat_bsp_init(pat);
index 46957ead3060eecb5e76b6f6daf3b498a6b6a5e9..53233a9beea91835ef4ce1385b45d19d1361c293 100644 (file)
@@ -1467,6 +1467,7 @@ asmlinkage __visible void __init xen_start_kernel(void)
 {
        struct physdev_set_iopl set_iopl;
        unsigned long initrd_start = 0;
+       u64 pat;
        int rc;
 
        if (!xen_start_info)
@@ -1574,8 +1575,8 @@ asmlinkage __visible void __init xen_start_kernel(void)
         * Modify the cache mode translation tables to match Xen's PAT
         * configuration.
         */
-
-       pat_init_cache_modes();
+       rdmsrl(MSR_IA32_CR_PAT, pat);
+       pat_init_cache_modes(pat);
 
        /* keep using Xen gdt for now; no urgent need to change it */