spi: spi-imx: only enable the clocks when we start to transfer a message
authorHuang Shijie <b32955@freescale.com>
Wed, 23 Oct 2013 08:31:50 +0000 (16:31 +0800)
committerMark Brown <broonie@linaro.org>
Wed, 23 Oct 2013 09:05:05 +0000 (10:05 +0100)
Current code keeps the clocks enabled all the time, it wastes the power
when there is no operaiton on the spi controller.

In order to save the power, this patch adds the two hooks:
   spi_imx_prepare_message: enable the clocks for this message
   spi_imx_unprepare_message: disable the clocks.

This patch also disables the clocks in the end of the probe.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
drivers/spi/spi-imx.c

index 15323d8bd9cfa4237c34069a76e3700dd6873c15..cc9defe7a7f257e6b1738a53f4a5dcca29f2f20c 100644 (file)
@@ -749,6 +749,35 @@ static void spi_imx_cleanup(struct spi_device *spi)
 {
 }
 
+static int
+spi_imx_prepare_message(struct spi_master *master, struct spi_message *msg)
+{
+       struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+       int ret;
+
+       ret = clk_enable(spi_imx->clk_per);
+       if (ret)
+               return ret;
+
+       ret = clk_enable(spi_imx->clk_ipg);
+       if (ret) {
+               clk_disable(spi_imx->clk_per);
+               return ret;
+       }
+
+       return 0;
+}
+
+static int
+spi_imx_unprepare_message(struct spi_master *master, struct spi_message *msg)
+{
+       struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+
+       clk_disable(spi_imx->clk_ipg);
+       clk_disable(spi_imx->clk_per);
+       return 0;
+}
+
 static int spi_imx_probe(struct platform_device *pdev)
 {
        struct device_node *np = pdev->dev.of_node;
@@ -810,6 +839,8 @@ static int spi_imx_probe(struct platform_device *pdev)
        spi_imx->bitbang.txrx_bufs = spi_imx_transfer;
        spi_imx->bitbang.master->setup = spi_imx_setup;
        spi_imx->bitbang.master->cleanup = spi_imx_cleanup;
+       spi_imx->bitbang.master->prepare_message = spi_imx_prepare_message;
+       spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message;
        spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
 
        init_completion(&spi_imx->xfer_done);
@@ -872,6 +903,8 @@ static int spi_imx_probe(struct platform_device *pdev)
 
        dev_info(&pdev->dev, "probed\n");
 
+       clk_disable(spi_imx->clk_ipg);
+       clk_disable(spi_imx->clk_per);
        return ret;
 
 out_clk_put: