tty-usb-keyspan-pda: Coding style
authorAlan Cox <alan@redhat.com>
Tue, 22 Jul 2008 10:13:42 +0000 (11:13 +0100)
committerLinus Torvalds <torvalds@linux-foundation.org>
Tue, 22 Jul 2008 20:03:25 +0000 (13:03 -0700)
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/usb/serial/keyspan_pda.c

index 24a08ac2e4eebc53d4068b27b88b6707371e42ca..b60012ce4c91237e1d82846686d03d181e5901e5 100644 (file)
@@ -10,8 +10,9 @@
  *     the Free Software Foundation; either version 2 of the License, or
  *     (at your option) any later version.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
- * 
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
+ *
  * (09/07/2001) gkh
  *     cleaned up the Xircom support.  Added ids for Entregra device which is
  *     the same as the Xircom device.  Enabled the code to be compiled for
  *     support for Xircom PGSDB9
  *
  * (05/31/2001) gkh
- *     switched from using spinlock to a semaphore, which fixes lots of problems.
+ *     switched from using spinlock to a semaphore, which fixes lots of
+ *     problems.
  *
  * (04/08/2001) gb
  *     Identify version on module load.
- * 
+ *
  * (11/01/2000) Adam J. Richter
  *     usb_device_id table support
- * 
+ *
  * (10/05/2000) gkh
  *     Fixed bug with urb->dev not being set properly, now that the usb
  *     core needs it.
- * 
+ *
  * (08/28/2000) gkh
  *     Added locks for SMP safeness.
- *     Fixed MOD_INC and MOD_DEC logic and the ability to open a port more 
+ *     Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
  *     than once.
- * 
+ *
  * (07/20/2000) borchers
  *     - keyspan_pda_write no longer sleeps if it is called on interrupt time;
  *       PPP and the line discipline with stty echo on can call write on
  *       than done directly from the callback to avoid the race in write_chan
  *     - keyspan_pda_chars_in_buffer also indicates its buffer is full if the
  *       urb status is -EINPROGRESS, meaning it cannot write at the moment
- *      
+ *
  * (07/19/2000) gkh
  *     Added module_init and module_exit functions to handle the fact that this
  *     driver is a loadable module now.
  *
  * (03/26/2000) gkh
  *     Split driver up into device specific pieces.
- * 
+ *
  */
 
 
@@ -78,7 +80,7 @@
 #include <linux/workqueue.h>
 #include <linux/firmware.h>
 #include <linux/ihex.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
@@ -135,7 +137,7 @@ static struct usb_device_id id_table_combined [] = {
        { }                                             /* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
 
 static struct usb_driver keyspan_pda_driver = {
        .name =         "keyspan_pda",
@@ -159,9 +161,9 @@ static struct usb_device_id id_table_fake [] = {
 
 #ifdef XIRCOM
 static struct usb_device_id id_table_fake_xircom [] = {
-        { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
-        { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
-        { }                                             
+       { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
+       { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
+       { }
 };
 #endif
 
@@ -184,7 +186,7 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
        dbg(" request_unthrottle");
        /* ask the device to tell us when the tx buffer becomes
           sufficiently empty */
-       result = usb_control_msg(serial->dev, 
+       result = usb_control_msg(serial->dev,
                                 usb_sndctrlpipe(serial->dev, 0),
                                 7, /* request_unthrottle */
                                 USB_TYPE_VENDOR | USB_RECIP_INTERFACE
@@ -195,15 +197,15 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
                                 0,
                                 2000);
        if (result < 0)
-               dbg("%s - error %d from usb_control_msg", 
+               dbg("%s - error %d from usb_control_msg",
                    __func__, result);
 }
 
 
-static void keyspan_pda_rx_interrupt (struct urb *urb)
+static void keyspan_pda_rx_interrupt(struct urb *urb)
 {
        struct usb_serial_port *port = urb->context;
-               struct tty_struct *tty = port->port.tty;
+       struct tty_struct *tty = port->port.tty;
        unsigned char *data = urb->transfer_buffer;
        int i;
        int retval;
@@ -228,14 +230,13 @@ static void keyspan_pda_rx_interrupt (struct urb *urb)
                goto exit;
        }
 
-       /* see if the message is data or a status interrupt */
+       /* see if the message is data or a status interrupt */
        switch (data[0]) {
        case 0:
                /* rest of message is rx data */
                if (urb->actual_length) {
-                       for (i = 1; i < urb->actual_length ; ++i) {
+                       for (i = 1; i < urb->actual_length ; ++i)
                                tty_insert_flip_char(tty, data[i], 0);
-                       }
                        tty_flip_buffer_push(tty);
                }
                break;
@@ -259,9 +260,9 @@ static void keyspan_pda_rx_interrupt (struct urb *urb)
        }
 
 exit:
-       retval = usb_submit_urb (urb, GFP_ATOMIC);
+       retval = usb_submit_urb(urb, GFP_ATOMIC);
        if (retval)
-               err ("%s - usb_submit_urb failed with result %d",
+               err("%s - usb_submit_urb failed with result %d",
                     __func__, retval);
 }
 
@@ -292,32 +293,52 @@ static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
 }
 
 
-static speed_t keyspan_pda_setbaud (struct usb_serial *serial, speed_t baud)
+static speed_t keyspan_pda_setbaud(struct usb_serial *serial, speed_t baud)
 {
        int rc;
        int bindex;
 
-       switch(baud) {
-               case 110: bindex = 0; break;
-               case 300: bindex = 1; break;
-               case 1200: bindex = 2; break;
-               case 2400: bindex = 3; break;
-               case 4800: bindex = 4; break;
-               case 9600: bindex = 5; break;
-               case 19200: bindex = 6; break;
-               case 38400: bindex = 7; break;
-               case 57600: bindex = 8; break;
-               case 115200: bindex = 9; break;
-               default:
-                       bindex = 5;     /* Default to 9600 */
-                       baud = 9600;
+       switch (baud) {
+       case 110:
+               bindex = 0;
+               break;
+       case 300:
+               bindex = 1;
+               break;
+       case 1200:
+               bindex = 2;
+               break;
+       case 2400:
+               bindex = 3;
+               break;
+       case 4800:
+               bindex = 4;
+               break;
+       case 9600:
+               bindex = 5;
+               break;
+       case 19200:
+               bindex = 6;
+               break;
+       case 38400:
+               bindex = 7;
+               break;
+       case 57600:
+               bindex = 8;
+               break;
+       case 115200:
+               bindex = 9;
+               break;
+       default:
+               bindex = 5;     /* Default to 9600 */
+               baud = 9600;
        }
 
        /* rather than figure out how to sleep while waiting for this
           to complete, I just use the "legacy" API. */
        rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
                             0, /* set baud */
-                            USB_TYPE_VENDOR 
+                            USB_TYPE_VENDOR
                             | USB_RECIP_INTERFACE
                             | USB_DIR_OUT, /* type */
                             bindex, /* value */
@@ -343,11 +364,11 @@ static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state)
        else
                value = 0; /* clear break */
        result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-                               4, /* set break */
-                               USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-                               value, 0, NULL, 0, 2000);
+                       4, /* set break */
+                       USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+                       value, 0, NULL, 0, 2000);
        if (result < 0)
-               dbg("%s - error %d from usb_control_msg", 
+               dbg("%s - error %d from usb_control_msg",
                    __func__, result);
        /* there is something funky about this.. the TCSBRK that 'cu' performs
           ought to translate into a break_ctl(-1),break_ctl(0) pair HZ/4
@@ -490,10 +511,10 @@ static int keyspan_pda_write(struct tty_struct *tty,
           select() or poll() too) until we receive that unthrottle interrupt.
           Block if we can't write anything at all, otherwise write as much as
           we can. */
-       dbg("keyspan_pda_write(%d)",count);
+       dbg("keyspan_pda_write(%d)", count);
        if (count == 0) {
                dbg(" write request of 0 bytes");
-               return (0);
+               return 0;
        }
 
        /* we might block because of:
@@ -520,7 +541,7 @@ static int keyspan_pda_write(struct tty_struct *tty,
           scheduler time, since usb_control_msg() sleeps. */
        if (count > priv->tx_room && !in_interrupt()) {
                unsigned char room;
-               rc = usb_control_msg(serial->dev, 
+               rc = usb_control_msg(serial->dev,
                                     usb_rcvctrlpipe(serial->dev, 0),
                                     6, /* write_room */
                                     USB_TYPE_VENDOR | USB_RECIP_INTERFACE
@@ -551,7 +572,7 @@ static int keyspan_pda_write(struct tty_struct *tty,
 
        if (count) {
                /* now transfer data */
-               memcpy (port->write_urb->transfer_buffer, buf, count);
+               memcpy(port->write_urb->transfer_buffer, buf, count);
                /* send the data out the bulk port */
                port->write_urb->transfer_buffer_length = count;
 
@@ -563,8 +584,7 @@ static int keyspan_pda_write(struct tty_struct *tty,
                        dbg(" usb_submit_urb(write bulk) failed");
                        goto exit;
                }
-       }
-       else {
+       } else {
                /* There wasn't any room left, so we are throttled until
                   the buffer empties a bit */
                request_unthrottle = 1;
@@ -583,7 +603,7 @@ exit:
 }
 
 
-static void keyspan_pda_write_bulk_callback (struct urb *urb)
+static void keyspan_pda_write_bulk_callback(struct urb *urb)
 {
        struct usb_serial_port *port = urb->context;
        struct keyspan_pda_private *priv;
@@ -604,7 +624,7 @@ static int keyspan_pda_write_room(struct tty_struct *tty)
        /* used by n_tty.c for processing of tabs and such. Giving it our
           conservative guess is probably good enough, but needs testing by
           running a console through the device. */
-       return (priv->tx_room);
+       return priv->tx_room;
 }
 
 
@@ -662,7 +682,7 @@ static int keyspan_pda_open(struct tty_struct *tty,
        /* the normal serial device seems to always turn on DTR and RTS here,
           so do the same */
        if (tty && (tty->termios->c_cflag & CBAUD))
-               keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2) );
+               keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2));
        else
                keyspan_pda_set_modem_info(serial, 0);
 
@@ -685,7 +705,8 @@ static void keyspan_pda_close(struct tty_struct *tty,
        struct usb_serial *serial = port->serial;
 
        if (serial->dev) {
-               /* the normal serial device seems to always shut off DTR and RTS now */
+               /* the normal serial device seems to always shut
+                  off DTR and RTS now */
                if (tty->termios->c_cflag & HUPCL)
                        keyspan_pda_set_modem_info(serial, 0);
 
@@ -697,7 +718,7 @@ static void keyspan_pda_close(struct tty_struct *tty,
 
 
 /* download the firmware to a "fake" device (pre-renumeration) */
-static int keyspan_pda_fake_startup (struct usb_serial *serial)
+static int keyspan_pda_fake_startup(struct usb_serial *serial)
 {
        int response;
        const char *fw_name;
@@ -746,10 +767,10 @@ static int keyspan_pda_fake_startup (struct usb_serial *serial)
        response = ezusb_set_reset(serial, 0);
 
        /* we want this device to fail to have a driver assigned to it. */
-       return (1);
+       return 1;
 }
 
-static int keyspan_pda_startup (struct usb_serial *serial)
+static int keyspan_pda_startup(struct usb_serial *serial)
 {
 
        struct keyspan_pda_private *priv;
@@ -759,20 +780,20 @@ static int keyspan_pda_startup (struct usb_serial *serial)
 
        priv = kmalloc(sizeof(struct keyspan_pda_private), GFP_KERNEL);
        if (!priv)
-               return (1); /* error */
+               return 1; /* error */
        usb_set_serial_port_data(serial->port[0], priv);
        init_waitqueue_head(&serial->port[0]->write_wait);
        INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write);
        INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle);
        priv->serial = serial;
        priv->port = serial->port[0];
-       return (0);
+       return 0;
 }
 
-static void keyspan_pda_shutdown (struct usb_serial *serial)
+static void keyspan_pda_shutdown(struct usb_serial *serial)
 {
        dbg("%s", __func__);
-       
+
        kfree(usb_get_serial_port_data(serial->port[0]));
 }
 
@@ -831,7 +852,7 @@ static struct usb_serial_driver keyspan_pda_device = {
 };
 
 
-static int __init keyspan_pda_init (void)
+static int __init keyspan_pda_init(void)
 {
        int retval;
        retval = usb_serial_register(&keyspan_pda_device);
@@ -852,7 +873,7 @@ static int __init keyspan_pda_init (void)
                goto failed_usb_register;
        info(DRIVER_DESC " " DRIVER_VERSION);
        return 0;
-failed_usb_register:   
+failed_usb_register:
 #ifdef XIRCOM
        usb_serial_deregister(&xircom_pgs_fake_device);
 failed_xircom_register:
@@ -869,15 +890,15 @@ failed_pda_register:
 }
 
 
-static void __exit keyspan_pda_exit (void)
+static void __exit keyspan_pda_exit(void)
 {
-       usb_deregister (&keyspan_pda_driver);
-       usb_serial_deregister (&keyspan_pda_device);
+       usb_deregister(&keyspan_pda_driver);
+       usb_serial_deregister(&keyspan_pda_device);
 #ifdef KEYSPAN
-       usb_serial_deregister (&keyspan_pda_fake_device);
+       usb_serial_deregister(&keyspan_pda_fake_device);
 #endif
 #ifdef XIRCOM
-       usb_serial_deregister (&xircom_pgs_fake_device);
+       usb_serial_deregister(&xircom_pgs_fake_device);
 #endif
 }
 
@@ -885,8 +906,8 @@ static void __exit keyspan_pda_exit (void)
 module_init(keyspan_pda_init);
 module_exit(keyspan_pda_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);