cnic, bnx2i: Fix bug on some bnx2x devices that don't support iSCSI
authorMichael Chan <mchan@broadcom.com>
Fri, 2 Aug 2013 18:28:23 +0000 (11:28 -0700)
committerDavid S. Miller <davem@davemloft.net>
Fri, 2 Aug 2013 22:55:48 +0000 (15:55 -0700)
On some bnx2x devices, iSCSI is determined to be unsupported only after
firmware is downloaded.  We need to check max_iscsi_conn again after
NETDEV_UP and block iSCSI init operations.  Without this fix, iscsiadm
can hang as the firmware will not respond to the iSCSI init message.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/broadcom/cnic.c
drivers/scsi/bnx2i/bnx2i_init.c

index 6bd6d143491b08e90c898c7891d3c397d328f594..4f8a5357cedc4b93e7dd592805f0ca30e40e456f 100644 (file)
@@ -5276,6 +5276,13 @@ static int cnic_register_netdev(struct cnic_dev *dev)
        if (err)
                netdev_err(dev->netdev, "register_cnic failed\n");
 
+       /* Read iSCSI config again.  On some bnx2x device, iSCSI config
+        * can change after firmware is downloaded.
+        */
+       dev->max_iscsi_conn = ethdev->max_iscsi_conn;
+       if (ethdev->drv_state & CNIC_DRV_STATE_NO_ISCSI)
+               dev->max_iscsi_conn = 0;
+
        return err;
 }
 
index 50fef6963a811baa61b1fbec94e250a4e7457179..3104202902edb319ff02b92168226d4162fb9674 100644 (file)
@@ -172,16 +172,14 @@ void bnx2i_start(void *handle)
        struct bnx2i_hba *hba = handle;
        int i = HZ;
 
-       /*
-        * We should never register devices that don't support iSCSI
-        * (see bnx2i_init_one), so something is wrong if we try to
-        * start a iSCSI adapter on hardware with 0 supported iSCSI
-        * connections
+       /* On some bnx2x devices, it is possible that iSCSI is no
+        * longer supported after firmware is downloaded.  In that
+        * case, the iscsi_init_msg will return failure.
         */
-       BUG_ON(!hba->cnic->max_iscsi_conn);
 
        bnx2i_send_fw_iscsi_init_msg(hba);
-       while (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) && i--)
+       while (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) &&
+              !test_bit(ADAPTER_STATE_INIT_FAILED, &hba->adapter_state) && i--)
                msleep(BNX2I_INIT_POLL_TIME);
 }