S2IO: Optimized the delay to wait for command completion
authorSivakumar Subramani <Sivakumar.Subramani@neterion.com>
Sat, 24 Feb 2007 06:57:32 +0000 (01:57 -0500)
committerJeff Garzik <jeff@garzik.org>
Tue, 27 Feb 2007 09:27:11 +0000 (04:27 -0500)
- Optimized delay to wait for command completion so as to reduce the
  initialization wait time.
- Disable differentiated services steering. By default RMAC is configured to
  steer traffic with certain DS codes to other queues. Driver must initialize
  the DS memory to 0 to make sure that DS steering will not be used by default.

Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/net/s2io.c
drivers/net/s2io.h

index 7cc07c8e707678db44b5428bca34b980cb9921c3..cdf36745bb7bd3b27ac42645ac582f1c05d7d9f9 100644 (file)
@@ -1372,6 +1372,16 @@ static int init_nic(struct s2io_nic *nic)
                }
        }
 
+       /* Disable differentiated services steering logic */
+       for (i = 0; i < 64; i++) {
+               if (rts_ds_steer(nic, i, 0) == FAILURE) {
+                       DBG_PRINT(ERR_DBG, "%s: failed rts ds steering",
+                               dev->name);
+                       DBG_PRINT(ERR_DBG, "set on codepoint %d\n", i);
+                       return FAILURE;
+               }
+       }
+
        /* Program statistics memory */
        writeq(mac_control->stats_mem_phy, &bar0->stat_addr);
 
@@ -3195,26 +3205,37 @@ static void alarm_intr_handler(struct s2io_nic *nic)
  *   SUCCESS on success and FAILURE on failure.
  */
 
-static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit)
+static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit,
+                               int bit_state)
 {
-       int ret = FAILURE, cnt = 0;
+       int ret = FAILURE, cnt = 0, delay = 1;
        u64 val64;
 
-       while (TRUE) {
+       if ((bit_state != S2IO_BIT_RESET) && (bit_state != S2IO_BIT_SET))
+               return FAILURE;
+
+       do {
                val64 = readq(addr);
-               if (!(val64 & busy_bit)) {
-                       ret = SUCCESS;
-                       break;
+               if (bit_state == S2IO_BIT_RESET) {
+                       if (!(val64 & busy_bit)) {
+                               ret = SUCCESS;
+                               break;
+                       }
+               } else {
+                       if (!(val64 & busy_bit)) {
+                               ret = SUCCESS;
+                               break;
+                       }
                }
 
                if(in_interrupt())
-                       mdelay(50);
+                       mdelay(delay);
                else
-                       msleep(50);
+                       msleep(delay);
 
-               if (cnt++ > 10)
-                       break;
-       }
+               if (++cnt >= 10)
+                       delay = 50;
+       } while (cnt < 20);
        return ret;
 }
 /*
@@ -4296,7 +4317,8 @@ static void s2io_set_multicast(struct net_device *dev)
                writeq(val64, &bar0->rmac_addr_cmd_mem);
                /* Wait till command completes */
                wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
-                                     RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING);
+                                       RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
+                                       S2IO_BIT_RESET);
 
                sp->m_cast_flg = 1;
                sp->all_multi_pos = MAC_MC_ALL_MC_ADDR_OFFSET;
@@ -4312,7 +4334,8 @@ static void s2io_set_multicast(struct net_device *dev)
                writeq(val64, &bar0->rmac_addr_cmd_mem);
                /* Wait till command completes */
                wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
-                                     RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING);
+                                       RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
+                                       S2IO_BIT_RESET);
 
                sp->m_cast_flg = 0;
                sp->all_multi_pos = 0;
@@ -4378,7 +4401,8 @@ static void s2io_set_multicast(struct net_device *dev)
 
                        /* Wait for command completes */
                        if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
-                                     RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING)) {
+                                       RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
+                                       S2IO_BIT_RESET)) {
                                DBG_PRINT(ERR_DBG, "%s: Adding ",
                                          dev->name);
                                DBG_PRINT(ERR_DBG, "Multicasts failed\n");
@@ -4409,7 +4433,8 @@ static void s2io_set_multicast(struct net_device *dev)
 
                        /* Wait for command completes */
                        if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
-                                     RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING)) {
+                                       RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
+                                       S2IO_BIT_RESET)) {
                                DBG_PRINT(ERR_DBG, "%s: Adding ",
                                          dev->name);
                                DBG_PRINT(ERR_DBG, "Multicasts failed\n");
@@ -4455,7 +4480,7 @@ static int s2io_set_mac_addr(struct net_device *dev, u8 * addr)
        writeq(val64, &bar0->rmac_addr_cmd_mem);
        /* Wait till command completes */
        if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
-                     RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING)) {
+                     RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, S2IO_BIT_RESET)) {
                DBG_PRINT(ERR_DBG, "%s: set_mac_addr failed\n", dev->name);
                return FAILURE;
        }
@@ -6735,6 +6760,37 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type)
        return SUCCESS;
 }
 
+/**
+ * rts_ds_steer - Receive traffic steering based on IPv4 or IPv6 TOS
+ * or Traffic class respectively.
+ * @nic: device peivate variable
+ * Description: The function configures the receive steering to
+ * desired receive ring.
+ * Return Value:  SUCCESS on success and
+ * '-1' on failure (endian settings incorrect).
+ */
+static int rts_ds_steer(struct s2io_nic *nic, u8 ds_codepoint, u8 ring)
+{
+       struct XENA_dev_config __iomem *bar0 = nic->bar0;
+       register u64 val64 = 0;
+
+       if (ds_codepoint > 63)
+               return FAILURE;
+
+       val64 = RTS_DS_MEM_DATA(ring);
+       writeq(val64, &bar0->rts_ds_mem_data);
+
+       val64 = RTS_DS_MEM_CTRL_WE |
+               RTS_DS_MEM_CTRL_STROBE_NEW_CMD |
+               RTS_DS_MEM_CTRL_OFFSET(ds_codepoint);
+
+       writeq(val64, &bar0->rts_ds_mem_ctrl);
+
+       return wait_for_cmd_complete(&bar0->rts_ds_mem_ctrl,
+                               RTS_DS_MEM_CTRL_STROBE_CMD_BEING_EXECUTED,
+                               S2IO_BIT_RESET);
+}
+
 /**
  *  s2io_init_nic - Initialization of the adapter .
  *  @pdev : structure containing the PCI related information of the device.
@@ -7029,7 +7085,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
            RMAC_ADDR_CMD_MEM_OFFSET(0 + MAC_MAC_ADDR_START_OFFSET);
        writeq(val64, &bar0->rmac_addr_cmd_mem);
        wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
-                     RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING);
+                     RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, S2IO_BIT_RESET);
        tmp64 = readq(&bar0->rmac_addr_data0_mem);
        mac_down = (u32) tmp64;
        mac_up = (u32) (tmp64 >> 32);
index 0de0c65f945aba87f90760557adca24bb49173ed..d23a50f3b70d7aaca014957773f4c459f8cd72bd 100644 (file)
@@ -32,7 +32,8 @@
 #define FAILURE -1
 #define S2IO_MINUS_ONE 0xFFFFFFFFFFFFFFFFULL
 #define S2IO_MAX_PCI_CONFIG_SPACE_REINIT 100
-
+#define S2IO_BIT_RESET 1
+#define S2IO_BIT_SET 2
 #define CHECKBIT(value, nbit) (value & (1 << nbit))
 
 /* Maximum time to flicker LED when asked to identify NIC using ethtool */
@@ -1005,7 +1006,8 @@ static int s2io_set_swapper(struct s2io_nic * sp);
 static void s2io_card_down(struct s2io_nic *nic);
 static int s2io_card_up(struct s2io_nic *nic);
 static int get_xena_rev_id(struct pci_dev *pdev);
-static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit);
+static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit,
+                                       int bit_state);
 static int s2io_add_isr(struct s2io_nic * sp);
 static void s2io_rem_isr(struct s2io_nic * sp);
 
@@ -1019,6 +1021,7 @@ static void queue_rx_frame(struct sk_buff *skb);
 static void update_L3L4_header(struct s2io_nic *sp, struct lro *lro);
 static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
                           struct sk_buff *skb, u32 tcp_len);
+static int rts_ds_steer(struct s2io_nic *nic, u8 ds_codepoint, u8 ring);
 
 #define s2io_tcp_mss(skb) skb_shinfo(skb)->gso_size
 #define s2io_udp_mss(skb) skb_shinfo(skb)->gso_size