//
-// Cipher Suite Selectors defiened in 802.11i
+// Cipher Suite Selectors defined in 802.11i
//
#define WLAN_11i_CSS_USE_GROUP 0
#define WLAN_11i_CSS_WEP40 1
} WLAN_FR_AUTHEN, *PWLAN_FR_AUTHEN;
-// Deauthenication
+// Deauthentication
typedef struct tagWLAN_FR_DEAUTHEN {
unsigned int uType;
*
* Functions:
* BBuGetFrameTime - Calculate data frame transmitting time
- * BBvCaculateParameter - Caculate PhyLength, PhyService and Phy Signal parameter for baseband Tx
+ * BBvCaculateParameter - Calculate PhyLength, PhyService and Phy Signal parameter for baseband Tx
* BBbVT3184Init - VIA VT3184 baseband chip init code
* BBvLoopbackOn - Turn on BaseBand Loopback mode
* BBvLoopbackOff - Turn off BaseBand Loopback mode
}
/*
- * Description: Caculate Length, Service, and Signal fields of Phy for Tx
+ * Description: Calculate Length, Service, and Signal fields of Phy for Tx
*
* Parameters:
* In:
if (pSelect == NULL) {
pSelect = pCurrBSS;
} else {
- // compare RSSI, select signal strong one
+ // compare RSSI, select the strongest signal
if (pCurrBSS->uRSSI < pSelect->uRSSI) {
pSelect = pCurrBSS;
}
if (pMgmt->sBSSList[ii].bActive &&
!compare_ether_addr(pMgmt->sBSSList[ii].abyBSSID,
pMgmt->abyCurrBSSID)) {
- //mike mark: there are two same BSSID in list if that AP is in hidden ssid mode,one 's SSID is null,
- // but other's is obvious, so if it acssociate with your STA exactly,you must keep two
- // of them!!!!!!!!!
+ //mike mark: there are two BSSID's in list. If that AP is in hidden ssid mode, one SSID is null,
+ // but other's might not be obvious, so if it associate's with your STA,
+ // you must keep the two of them!!
// bKeepCurrBSSID = FALSE;
continue;
}
}
if (pDevice->bUpdateBBVGA) {
- // Moniter if RSSI is too strong.
+ // Monitor if RSSI is too strong.
pBSSList->byRSSIStatCnt = 0;
RFvRSSITodBm(pDevice, (BYTE)(pRxPacket->uRSSI), &pBSSList->ldBmMAX);
pBSSList->ldBmAverage[0] = pBSSList->ldBmMAX;
if (pRxPacket->uRSSI != 0) {
RFvRSSITodBm(pDevice, (BYTE)(pRxPacket->uRSSI), &ldBm);
- // Moniter if RSSI is too strong.
+ // Monitor if RSSI is too strong.
pBSSList->byRSSIStatCnt++;
pBSSList->byRSSIStatCnt %= RSSI_STAT_COUNT;
pBSSList->ldBmAverage[pBSSList->byRSSIStatCnt] = ldBm;
/*+
*
* Routine Description:
- * Find an empty node and allocated; if no empty found,
- * instand used of most inactive one.
+ * Find an empty node and allocate it; if no empty node
+ * is found, then use the most inactive one.
*
* Return Value:
* None
}
}
- // if not found replace uInActiveCount is largest one.
+ // if not found replace uInActiveCount with the largest one.
if ( ii == (MAX_NODE_NUM + 1)) {
*puNodeIndex = SelectIndex;
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Replace inactive node = %d\n", SelectIndex);
* CARDbIsOFDMinBasicRate - Check if any OFDM rate is in BasicRateSet
* CARDvSetLoopbackMode - Set Loopback mode
* CARDbSoftwareReset - Sortware reset NIC
- * CARDqGetTSFOffset - Caculate TSFOffset
+ * CARDqGetTSFOffset - Calculate TSFOffset
* CARDbGetCurrentTSF - Read Current NIC TSF counter
- * CARDqGetNextTBTT - Caculate Next Beacon TSF counter
+ * CARDqGetNextTBTT - Calculate Next Beacon TSF counter
* CARDvSetFirstNextTBTT - Set NIC Beacon time
* CARDvUpdateNextTBTT - Sync. NIC Beacon time
* CARDbRadioPowerOff - Turn Off NIC Radio Power
*
* Revision History:
* 06-10-2003 Bryan YC Fan: Re-write codes to support VT3253 spec.
- * 08-26-2003 Kyle Hsu: Modify the defination type of dwIoBase.
+ * 08-26-2003 Kyle Hsu: Modify the definition type of dwIoBase.
* 09-01-2003 Bryan YC Fan: Add vUpdateIFS().
*
*/
}
/*
- * Description: Caculate TxRate and RsvTime fields for RSPINF in OFDM mode.
+ * Description: Calculate TxRate and RsvTime fields for RSPINF in OFDM mode.
*
* Parameters:
* In:
/*
- * Description: Caculate TSF offset of two TSF input
+ * Description: Calculate TSF offset of two TSF input
* Get TSF Offset from RxBCN's TSF and local TSF
*
* Parameters:
unsigned int cbTD;
//
- // Variables to track resources for the Interript In Pipe
+ // Variables to track resources for the Interrupt In Pipe
//
INT_BUFFER intBuf;
BOOL fKillEventPollingThread;
if ((*pbyRSSI != 0) &&
(pMgmt->pCurrBSS!=NULL)) {
RFvRSSITodBm(pDevice, *pbyRSSI, &ldBm);
- // Moniter if RSSI is too strong.
+ // Monitor if RSSI is too strong.
pMgmt->pCurrBSS->byRSSIStatCnt++;
pMgmt->pCurrBSS->byRSSIStatCnt %= RSSI_STAT_COUNT;
pMgmt->pCurrBSS->ldBmAverage[pMgmt->pCurrBSS->byRSSIStatCnt] = ldBm;
*
* File: hostap.c
*
- * Purpose: handle hostap deamon ioctl input/out functions
+ * Purpose: handle hostap daemon ioctl input/out functions
*
* Author: Lyndon Chen
*
/*
* Description:
- * register net_device (AP) for hostap deamon
+ * register net_device (AP) for hostap daemon
*
* Parameters:
* In:
/*
* Description:
- * remove station function supported for hostap deamon
+ * remove station function supported for hostap daemon
*
* Parameters:
* In:
/*
* Description:
- * add a station from hostap deamon
+ * add a station from hostap daemon
*
* Parameters:
* In:
/*
* Description:
- * vt6656_hostap_ioctl main function supported for hostap deamon.
+ * vt6656_hostap_ioctl main function supported for hostap daemon.
*
* Parameters:
* In:
pMgmt->sNodeDBTable[0].bRxPSPoll =
FALSE;
} else if (pMgmt->byDTIMCount == 0) {
- /* check if mutltcast tx bufferring */
+ /* check if multicast tx buffering */
pMgmt->byDTIMCount =
pMgmt->byDTIMPeriod-1;
pMgmt->sNodeDBTable[0].bRxPSPoll = TRUE;
result = -EFAULT;
break;
}
- /* for some AP maybe good authenticate */
+ /* for some AP's maybe a good authentication */
if (wpa_Result.key_mgmt == 0x20)
pMgmt->Cisco_cckm = 1;
else
break;
default:
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Private command not support..\n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Private command not supported..\n");
}
return result;
jj++;
}
- wrq->flags = 1; // Should be define'd
+ wrq->flags = 1; // Should be defined
wrq->length = jj;
memcpy(extra, sock, sizeof(struct sockaddr) * jj);
memcpy(extra + sizeof(struct sockaddr) * jj, qual, sizeof(struct iw_quality) * jj);
BOOL bReturnValue = FALSE;
if (is_broadcast_ether_addr(pbyBSSID)) {
- // dealte all key
+ // delete all keys
if ((dwKeyIndex & PAIRWISE_KEY) != 0) {
for (i=0;i<MAX_KEY_TABLE;i++) {
pTable->KeyTable[i].PairwiseKey.bKeyValid = FALSE;
/*
- * Description: Check Pairewise Key
+ * Description: Check Pairwise Key
*
* Parameters:
* In:
* vt6656_probe - module initial (insmod) driver entry
* device_remove1 - module remove entry
* device_open - allocate dma/descripter resource & initial mac/bbp function
- * device_xmit - asynchrous data tx function
+ * device_xmit - asynchronous data tx function
* device_set_multi - set mac filter
* device_ioctl - ioctl entry
- * device_close - shutdown mac/bbp & free dma/descripter resource
+ * device_close - shutdown mac/bbp & free dma/descriptor resource
* device_alloc_frag_buf - rx fragement pre-allocated function
* device_free_tx_bufs - free tx buffer function
* device_dma0_tx_80211- tx 802.11 frame via dma0
- * device_dma0_xmit- tx PS bufferred frame via dma0
+ * device_dma0_xmit- tx PS buffered frame via dma0
* device_init_registers- initial MAC & BBP & RF internal registers.
* device_init_rings- initial tx/rx ring buffer
* device_init_defrag_cb- initial & allocate de-fragement buffer.
//
-// Initialiation of MAC & BBP registers
+// Initialization of MAC & BBP registers
//
static BOOL device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
viawget_wpa_header *wpahdr;
int ii=0;
// wait_queue_head_t Set_wait;
- //send device close to wpa_supplicnat layer
+ //send device close to wpa_supplicant layer
if (pDevice->bWPADEVUp==TRUE) {
wpahdr = (viawget_wpa_header *)pDevice->skb->data;
wpahdr->type = VIAWGET_DEVICECLOSE_MSG;
}
if (device_init_defrag_cb(pDevice)== FALSE) {
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " Initial defragement cb fail \n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " Initial defragment cb fail \n");
goto free_rx_tx;
}
return crc;
}
-//find out the start position of str2 from str1
+//find out the start position of str2 from str1
static unsigned char *kstrstr(const unsigned char *str1,
const unsigned char *str2) {
int str1_len = strlen(str1);
}
memset(buf2,0,100);
- memcpy(buf2,start_p,end_p-start_p); //get the tartget line
+ memcpy(buf2,start_p,end_p-start_p); //get the target line
buf2[end_p-start_p]='\0';
//find value
}
if(!(filp->f_op) || !(filp->f_op->read) ||!(filp->f_op->write)) {
- printk("file %s cann't readable or writable?\n",config_path);
+ printk("file %s is not read or writeable?\n",config_path);
result = -1;
goto error1;
}
default:
rc = -EOPNOTSUPP;
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Ioctl command not support..%x\n", cmd);
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Ioctl command not supported..%x\n", cmd);
}
*
* File: power.c
*
- * Purpose: Handles 802.11 power management functions
+ * Purpose: Handles 802.11 power management functions
*
* Author: Lyndon Chen
*
wLength1,
abyArray
);
- //Channle Table 0
+ //Channel Table 0
wValue = 0;
while ( wLength2 > 0 ) {
wLength1,
abyArray);
- //Channle Table 0
+ //Channel Table 0
wValue = 0;
while ( wLength2 > 0 ) {
*
* Parameters:
* In:
- * pDevice - Pointer to adpater
+ * pDevice - Pointer to adapter
* dwTxBufferAddr - Transmit Buffer
* pPacket - Packet from upper layer
* cbPacketSize - Transmit Data Length
if (bIsPSPOLL) {
// The MAC will automatically replace the Duration-field of MAC header by Duration-field
- // of FIFO control header.
+ // of FIFO control header.
// This will cause AID-field of PS-POLL packet be incorrect (Because PS-POLL's AID field is
// in the same place of other packet's Duration-field).
// And it will cause Cisco-AP to issue Disassociation-packet
cbMacHdLen = WLAN_HDR_ADDR3_LEN;
}
- // hostapd deamon ext support rate patch
+ // hostapd daemon ext support rate patch
if (WLAN_GET_FC_FSTYPE(p80211Header->sA4.wFrameCtl) == WLAN_FSTYPE_ASSOCRESP) {
if (((PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates)->len != 0) {
pMACHeader->wFrameCtl &= cpu_to_le16(0xfffc);
memcpy(pbyPayloadHead, (skb->data + cbMacHdLen), cbFrameBodySize);
- // replace support rate, patch for hostapd deamon( only support 11M)
+ // replace support rate, patch for hostapd daemon( only support 11M)
if (WLAN_GET_FC_FSTYPE(p80211Header->sA4.wFrameCtl) == WLAN_FSTYPE_ASSOCRESP) {
if (cbExtSuppRate != 0) {
if (((PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates)->len != 0)
}
PRINT_K("Authentication completed!!\n");
}
- else if((Key_info & BIT3) && (Descriptor_type==2) && //RSN pairse-key challenge
+ else if((Key_info & BIT3) && (Descriptor_type==2) && //RSN pairwise-key challenge
(Key_info & BIT8) && (Key_info & BIT9)) {
pDevice->fWPA_Authened = TRUE;
PRINT_K("WPA2 Authentication completed!!\n");
*
* File: tcrc.c
*
- * Purpose: Implement functions to caculate CRC
+ * Purpose: Implement functions to calculate CRC
*
* Author: Tevin Chen
*
*
* File: tcrc.h
*
- * Purpose: Implement functions to caculate CRC
+ * Purpose: Implement functions to calculate CRC
*
* Author: Tevin Chen
*
* Date: May 21, 1996
*
* Functions:
- * ETHbyGetHashIndexByCrc32 - Caculate multicast hash value by CRC32
+ * ETHbyGetHashIndexByCrc32 - Calculate multicast hash value by CRC32
* ETHbIsBufferCrc32Ok - Check CRC value of the buffer if Ok or not
*
* Revision History:
/*
- * Description: Caculate multicast hash value by CRC32
+ * Description: Calculate multicast hash value by CRC32
*
* Parameters:
* In:
/*
- * Description: Caculate RC4Key fom TK, TA, and TSC
+ * Description: Calculate RC4Key fom TK, TA, and TSC
*
* Parameters:
* In:
*
*
* Return Value:
- * A ptr to Tx frame or NULL on allocation failue
+ * A ptr to Tx frame or NULL on allocation failure
*
-*/
DBG_PRT(MSG_LEVEL_DEBUG,
KERN_INFO "vMgrCreateOwnIBSS fail!\n");
}
- // alway turn off unicast bit
+ // always turn off unicast bit
MACvRegBitsOff(pDevice, MAC_REG_RCR, RCR_UNICAST);
pDevice->byRxMode &= ~RCR_UNICAST;
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wcmd: rx_mode = %x\n", pDevice->byRxMode );
pItemSSID = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
pItemSSID->len = 0;
memset(pItemSSID->abySSID, 0, WLAN_SSID_MAXLEN);
- //clear dessire SSID
+ //clear desired SSID
pItemSSID = (PWLAN_IE_SSID)pMgmt->abyDesireSSID;
pItemSSID->len = 0;
memset(pItemSSID->abySSID, 0, WLAN_SSID_MAXLEN);
ADD_ONE_WITH_WRAP_AROUND(uIndex, DUPLICATE_RX_CACHE_LENGTH);
}
}
- /* Not fount in cache - insert */
+ /* Not found in cache - insert */
pCacheEntry = &pCache->asCacheEntry[pCache->uInPtr];
pCacheEntry->wFmSequence = pMACHeader->wSeqCtl;
memcpy(&(pCacheEntry->abyAddr2[0]), &(pMACHeader->abyAddr2[0]), ETH_ALEN);
*
* Functions:
* nsMgrObjectInitial - Initialize Management Objet data structure
- * vMgrObjectReset - Reset Management Objet data structure
+ * vMgrObjectReset - Reset Management Object data structure
* vMgrAssocBeginSta - Start associate function
* vMgrReAssocBeginSta - Start reassociate function
* vMgrDisassocBeginSta - Start disassociate function
// During dpc, already in spinlocked.
if (BSSbIsSTAInNodeDB(pDevice, sFrame.pHdr->sA3.abyAddr2, &uNodeIndex)) {
- // Update the STA, (Techically the Beacons of all the IBSS nodes
+ // Update the STA, (Technically the Beacons of all the IBSS nodes
// should be identical, but that's not happening in practice.
pMgmt->abyCurrSuppRates[1] = RATEuSetIE((PWLAN_IE_SUPP_RATES)sFrame.pSuppRates,
(PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
memcpy(pDevice->abyBSSID, pCurr->abyBSSID, WLAN_BSSID_LEN);
// Add current BSS to Candidate list
- // This should only works for WPA2 BSS, and WPA2 BSS check must be done before.
+ // This should only work for WPA2 BSS, and WPA2 BSS check must be done before.
if (pMgmt->eAuthenMode == WMAC_AUTH_WPA2) {
BOOL bResult = bAdd_PMKID_Candidate((void *) pDevice,
pMgmt->abyCurrBSSID,
*
*
* Return Value:
- * PTR to frame; or NULL on allocation failue
+ * PTR to frame; or NULL on allocation failure
*
-*/
*
*
* Return Value:
- * PTR to frame; or NULL on allocation failue
+ * PTR to frame; or NULL on allocation failure
*
-*/
memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
memcpy( sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
- // Set the capibility and listen interval
+ // Set the capability and listen interval
*(sFrame.pwCapInfo) = cpu_to_le16(wCurrCapInfo);
*(sFrame.pwListenInterval) = cpu_to_le16(wListenInterval);
*
*
* Return Value:
- * A ptr to frame or NULL on allocation failue
+ * A ptr to frame or NULL on allocation failure
*
-*/
memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
memcpy( sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
- /* Set the capibility and listen interval */
+ /* Set the capability and listen interval */
*(sFrame.pwCapInfo) = cpu_to_le16(wCurrCapInfo);
*(sFrame.pwListenInterval) = cpu_to_le16(wListenInterval);
*
*
* Return Value:
- * PTR to frame; or NULL on allocation failue
+ * PTR to frame; or NULL on allocation failure
*
-*/
*
*
* Return Value:
- * PTR to frame; or NULL on allocation failue
+ * PTR to frame; or NULL on allocation failure
*
-*/
* Parameters:
* In:
* byCmd - Search type
- * byEncrypt- Encrcypt Type
+ * byEncrypt- Encrypt Type
* pBSSList - BSS list
* Out:
* none
pBSSNode->abyCSSPK[j++] = WLAN_11i_CSS_USE_GROUP;
bUseGK = TRUE;
} else if ( !memcmp(pbyOUI, abyOUIWEP40, 4)) {
- // Invialid CSS, continue to parsing
+ // Invalid CSS, continue parsing
} else if ( !memcmp(pbyOUI, abyOUITKIP, 4)) {
if (pBSSNode->byCSSGK != WLAN_11i_CSS_CCMP)
pBSSNode->abyCSSPK[j++] = WLAN_11i_CSS_TKIP;
else
- ; // Invialid CSS, continue to parsing
+ ; // Invalid CSS, continue parsing
} else if ( !memcmp(pbyOUI, abyOUICCMP, 4)) {
pBSSNode->abyCSSPK[j++] = WLAN_11i_CSS_CCMP;
} else if ( !memcmp(pbyOUI, abyOUIWEP104, 4)) {
- // Invialid CSS, continue to parsing
+ // Invalid CSS, continue parsing
} else {
// any vendor checks here
pBSSNode->abyCSSPK[j++] = WLAN_11i_CSS_UNKNOWN;
/*
* Description:
- * register netdev for wpa supplicant deamon
+ * register netdev for wpa supplicant daemon
*
* Parameters:
* In:
/*
* Description:
- * Set enable/disable dev for wpa supplicant deamon
+ * Set enable/disable dev for wpa supplicant daemon
*
* Parameters:
* In:
if ((byKeyDecMode == KEY_CTL_TKIP) &&
(param->u.wpa_key.key_len != MAX_KEY_LEN)) {
// TKIP Key must be 256 bits
- DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "return- TKIP Key must be 256 bits!\n");
+ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "return - TKIP Key must be 256 bits!\n");
return -EINVAL;
}
// Check AES key length
projects / firefly-linux-kernel-4.4.55.git / commitdiff