* Timeout value to be used for the given mailbox command
**/
int
-lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd)
+lpfc_mbox_tmo_val(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
{
- switch (cmd) {
+ MAILBOX_t *mbox = &mboxq->u.mb;
+ uint8_t subsys, opcode;
+
+ switch (mbox->mbxCommand) {
case MBX_WRITE_NV: /* 0x03 */
case MBX_UPDATE_CFG: /* 0x1B */
case MBX_DOWN_LOAD: /* 0x1C */
case MBX_LOAD_EXP_ROM: /* 0x9C */
return LPFC_MBOX_TMO_FLASH_CMD;
case MBX_SLI4_CONFIG: /* 0x9b */
+ subsys = lpfc_sli_config_mbox_subsys_get(phba, mboxq);
+ opcode = lpfc_sli_config_mbox_opcode_get(phba, mboxq);
+ if (subsys == LPFC_MBOX_SUBSYSTEM_COMMON) {
+ switch (opcode) {
+ case LPFC_MBOX_OPCODE_READ_OBJECT:
+ case LPFC_MBOX_OPCODE_WRITE_OBJECT:
+ case LPFC_MBOX_OPCODE_READ_OBJECT_LIST:
+ case LPFC_MBOX_OPCODE_DELETE_OBJECT:
+ case LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG:
+ case LPFC_MBOX_OPCODE_GET_PROFILE_LIST:
+ case LPFC_MBOX_OPCODE_SET_ACT_PROFILE:
+ case LPFC_MBOX_OPCODE_SET_PROFILE_CONFIG:
+ case LPFC_MBOX_OPCODE_GET_FACTORY_PROFILE_CONFIG:
+ return LPFC_MBOX_SLI4_CONFIG_EXTENDED_TMO;
+ }
+ }
+ if (subsys == LPFC_MBOX_SUBSYSTEM_FCOE) {
+ switch (opcode) {
+ case LPFC_MBOX_OPCODE_FCOE_SET_FCLINK_SETTINGS:
+ return LPFC_MBOX_SLI4_CONFIG_EXTENDED_TMO;
+ }
+ }
return LPFC_MBOX_SLI4_CONFIG_TMO;
}
return LPFC_MBOX_TMO;
}
/* Complete the initialization for the particular Opcode. */
- opcode = lpfc_sli4_mbox_opcode_get(phba, mbox);
+ opcode = lpfc_sli_config_mbox_opcode_get(phba, mbox);
switch (opcode) {
case LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT:
if (emb == LPFC_SLI4_MBX_EMBED)
}
/**
- * lpfc_sli4_mbox_opcode_get - Get the opcode from a sli4 mailbox command
+ * lpfc_sli_config_mbox_subsys_get - Get subsystem from a sli_config mbox cmd
* @phba: pointer to lpfc hba data structure.
- * @mbox: pointer to lpfc mbox command.
+ * @mbox: pointer to lpfc mbox command queue entry.
+ *
+ * This routine gets the subsystem from a SLI4 specific SLI_CONFIG mailbox
+ * command. If the mailbox command is not MBX_SLI4_CONFIG (0x9B) or if the
+ * sub-header is not present, subsystem LPFC_MBOX_SUBSYSTEM_NA (0x0) shall
+ * be returned.
+ **/
+uint8_t
+lpfc_sli_config_mbox_subsys_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
+{
+ struct lpfc_mbx_sli4_config *sli4_cfg;
+ union lpfc_sli4_cfg_shdr *cfg_shdr;
+
+ if (mbox->u.mb.mbxCommand != MBX_SLI4_CONFIG)
+ return LPFC_MBOX_SUBSYSTEM_NA;
+ sli4_cfg = &mbox->u.mqe.un.sli4_config;
+
+ /* For embedded mbox command, get opcode from embedded sub-header*/
+ if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) {
+ cfg_shdr = &mbox->u.mqe.un.sli4_config.header.cfg_shdr;
+ return bf_get(lpfc_mbox_hdr_subsystem, &cfg_shdr->request);
+ }
+
+ /* For non-embedded mbox command, get opcode from first dma page */
+ if (unlikely(!mbox->sge_array))
+ return LPFC_MBOX_SUBSYSTEM_NA;
+ cfg_shdr = (union lpfc_sli4_cfg_shdr *)mbox->sge_array->addr[0];
+ return bf_get(lpfc_mbox_hdr_subsystem, &cfg_shdr->request);
+}
+
+/**
+ * lpfc_sli_config_mbox_opcode_get - Get opcode from a sli_config mbox cmd
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command queue entry.
*
- * This routine gets the opcode from a SLI4 specific mailbox command for
- * sending IOCTL command. If the mailbox command is not MBX_SLI4_CONFIG
- * (0x9B) or if the IOCTL sub-header is not present, opcode 0x0 shall be
+ * This routine gets the opcode from a SLI4 specific SLI_CONFIG mailbox
+ * command. If the mailbox command is not MBX_SLI4_CONFIG (0x9B) or if
+ * the sub-header is not present, opcode LPFC_MBOX_OPCODE_NA (0x0) be
* returned.
**/
uint8_t
-lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+lpfc_sli_config_mbox_opcode_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
{
struct lpfc_mbx_sli4_config *sli4_cfg;
union lpfc_sli4_cfg_shdr *cfg_shdr;
if (mbox->u.mb.mbxCommand != MBX_SLI4_CONFIG)
- return 0;
+ return LPFC_MBOX_OPCODE_NA;
sli4_cfg = &mbox->u.mqe.un.sli4_config;
/* For embedded mbox command, get opcode from embedded sub-header*/
/* For non-embedded mbox command, get opcode from first dma page */
if (unlikely(!mbox->sge_array))
- return 0;
+ return LPFC_MBOX_OPCODE_NA;
cfg_shdr = (union lpfc_sli4_cfg_shdr *)mbox->sge_array->addr[0];
return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request);
}
/* Unknown mailbox command compl */
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"(%d):0323 Unknown Mailbox command "
- "x%x (x%x) Cmpl\n",
+ "x%x (x%x/x%x) Cmpl\n",
pmb->vport ? pmb->vport->vpi : 0,
pmbox->mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, pmb));
+ lpfc_sli_config_mbox_subsys_get(phba,
+ pmb),
+ lpfc_sli_config_mbox_opcode_get(phba,
+ pmb));
phba->link_state = LPFC_HBA_ERROR;
phba->work_hs = HS_FFER3;
lpfc_handle_eratt(phba);
if (pmbox->mbxStatus == MBXERR_NO_RESOURCES) {
/* Mbox cmd cmpl error - RETRYing */
lpfc_printf_log(phba, KERN_INFO,
- LOG_MBOX | LOG_SLI,
- "(%d):0305 Mbox cmd cmpl "
- "error - RETRYing Data: x%x "
- "(x%x) x%x x%x x%x\n",
- pmb->vport ? pmb->vport->vpi :0,
- pmbox->mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba,
- pmb),
- pmbox->mbxStatus,
- pmbox->un.varWords[0],
- pmb->vport->port_state);
+ LOG_MBOX | LOG_SLI,
+ "(%d):0305 Mbox cmd cmpl "
+ "error - RETRYing Data: x%x "
+ "(x%x/x%x) x%x x%x x%x\n",
+ pmb->vport ? pmb->vport->vpi : 0,
+ pmbox->mbxCommand,
+ lpfc_sli_config_mbox_subsys_get(phba,
+ pmb),
+ lpfc_sli_config_mbox_opcode_get(phba,
+ pmb),
+ pmbox->mbxStatus,
+ pmbox->un.varWords[0],
+ pmb->vport->port_state);
pmbox->mbxStatus = 0;
pmbox->mbxOwner = OWN_HOST;
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
/* Mailbox cmd <cmd> Cmpl <cmpl> */
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
- "(%d):0307 Mailbox cmd x%x (x%x) Cmpl x%p "
+ "(%d):0307 Mailbox cmd x%x (x%x/x%x) Cmpl x%p "
"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n",
pmb->vport ? pmb->vport->vpi : 0,
pmbox->mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, pmb),
+ lpfc_sli_config_mbox_subsys_get(phba, pmb),
+ lpfc_sli_config_mbox_opcode_get(phba, pmb),
pmb->mbox_cmpl,
*((uint32_t *) pmbox),
pmbox->un.varWords[0],
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
if (unlikely(rc)) {
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, mbox_tmo);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
if (unlikely(rc)) {
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
}
/* timeout active mbox command */
mod_timer(&psli->mbox_tmo, (jiffies +
- (HZ * lpfc_mbox_tmo_val(phba, mb->mbxCommand))));
+ (HZ * lpfc_mbox_tmo_val(phba, pmbox))));
}
/* Mailbox cmd <cmd> issue */
drvr_flag);
goto out_not_finished;
}
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
- mb->mbxCommand) *
- 1000) + jiffies;
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox) *
+ 1000) + jiffies;
i = 0;
/* Wait for command to complete */
while (((word0 & OWN_CHIP) == OWN_CHIP) ||
lpfc_sli4_async_mbox_block(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
- uint8_t actcmd = MBX_HEARTBEAT;
int rc = 0;
- unsigned long timeout;
+ unsigned long timeout = 0;
/* Mark the asynchronous mailbox command posting as blocked */
spin_lock_irq(&phba->hbalock);
psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
- if (phba->sli.mbox_active)
- actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
- spin_unlock_irq(&phba->hbalock);
/* Determine how long we might wait for the active mailbox
* command to be gracefully completed by firmware.
*/
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) * 1000) +
- jiffies;
+ if (phba->sli.mbox_active)
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
+ phba->sli.mbox_active) *
+ 1000) + jiffies;
+ spin_unlock_irq(&phba->hbalock);
+
/* Wait for the outstnading mailbox command to complete */
while (phba->sli.mbox_active) {
/* Check active mailbox complete status every 2ms */
if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
spin_unlock_irqrestore(&phba->hbalock, iflag);
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "(%d):2532 Mailbox command x%x (x%x) "
+ "(%d):2532 Mailbox command x%x (x%x/x%x) "
"cannot issue Data: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
psli->sli_flag, MBX_POLL);
return MBXERR_ERROR;
}
dma_address = &phba->sli4_hba.bmbx.dma_address;
writel(dma_address->addr_hi, phba->sli4_hba.BMBXregaddr);
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq)
* 1000) + jiffies;
do {
bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
/* Post the low mailbox dma address to the port. */
writel(dma_address->addr_lo, phba->sli4_hba.BMBXregaddr);
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq)
* 1000) + jiffies;
do {
bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
lpfc_sli4_swap_str(phba, mboxq);
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
- "(%d):0356 Mailbox cmd x%x (x%x) Status x%x "
+ "(%d):0356 Mailbox cmd x%x (x%x/x%x) Status x%x "
"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x"
" x%x x%x CQ: x%x x%x x%x x%x\n",
- mboxq->vport ? mboxq->vport->vpi : 0,
- mbx_cmnd, lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ mboxq->vport ? mboxq->vport->vpi : 0, mbx_cmnd,
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
bf_get(lpfc_mqe_status, mb),
mb->un.mb_words[0], mb->un.mb_words[1],
mb->un.mb_words[2], mb->un.mb_words[3],
rc = lpfc_mbox_dev_check(phba);
if (unlikely(rc)) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "(%d):2544 Mailbox command x%x (x%x) "
+ "(%d):2544 Mailbox command x%x (x%x/x%x) "
"cannot issue Data: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
psli->sli_flag, flag);
goto out_not_finished;
}
if (rc != MBX_SUCCESS)
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
"(%d):2541 Mailbox command x%x "
- "(x%x) cannot issue Data: x%x x%x\n",
+ "(x%x/x%x) cannot issue Data: "
+ "x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba,
+ mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba,
+ mboxq),
psli->sli_flag, flag);
return rc;
} else if (flag == MBX_POLL) {
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
"(%d):2542 Try to issue mailbox command "
- "x%x (x%x) synchronously ahead of async"
+ "x%x (x%x/x%x) synchronously ahead of async"
"mailbox command queue: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
psli->sli_flag, flag);
/* Try to block the asynchronous mailbox posting */
rc = lpfc_sli4_async_mbox_block(phba);
rc = lpfc_sli4_post_sync_mbox(phba, mboxq);
if (rc != MBX_SUCCESS)
lpfc_printf_log(phba, KERN_ERR,
- LOG_MBOX | LOG_SLI,
- "(%d):2597 Mailbox command "
- "x%x (x%x) cannot issue "
- "Data: x%x x%x\n",
- mboxq->vport ?
- mboxq->vport->vpi : 0,
- mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba,
- mboxq),
- psli->sli_flag, flag);
+ LOG_MBOX | LOG_SLI,
+ "(%d):2597 Mailbox command "
+ "x%x (x%x/x%x) cannot issue "
+ "Data: x%x x%x\n",
+ mboxq->vport ?
+ mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli_config_mbox_subsys_get(phba,
+ mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba,
+ mboxq),
+ psli->sli_flag, flag);
/* Unblock the async mailbox posting afterward */
lpfc_sli4_async_mbox_unblock(phba);
}
rc = lpfc_mbox_cmd_check(phba, mboxq);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "(%d):2543 Mailbox command x%x (x%x) "
+ "(%d):2543 Mailbox command x%x (x%x/x%x) "
"cannot issue Data: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
psli->sli_flag, flag);
goto out_not_finished;
}
spin_unlock_irqrestore(&phba->hbalock, iflags);
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
"(%d):0354 Mbox cmd issue - Enqueue Data: "
- "x%x (x%x) x%x x%x x%x\n",
+ "x%x (x%x/x%x) x%x x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0xffffff,
bf_get(lpfc_mqe_command, &mboxq->u.mqe),
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
phba->pport->port_state,
psli->sli_flag, MBX_NOWAIT);
/* Wake up worker thread to transport mailbox command from head */
/* Start timer for the mbox_tmo and log some mailbox post messages */
mod_timer(&psli->mbox_tmo, (jiffies +
- (HZ * lpfc_mbox_tmo_val(phba, mbx_cmnd))));
+ (HZ * lpfc_mbox_tmo_val(phba, mboxq))));
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
- "(%d):0355 Mailbox cmd x%x (x%x) issue Data: "
+ "(%d):0355 Mailbox cmd x%x (x%x/x%x) issue Data: "
"x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0, mbx_cmnd,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
phba->pport->port_state, psli->sli_flag);
if (mbx_cmnd != MBX_HEARTBEAT) {
rc = lpfc_sli4_mq_put(phba->sli4_hba.mbx_wq, mqe);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "(%d):2533 Mailbox command x%x (x%x) "
+ "(%d):2533 Mailbox command x%x (x%x/x%x) "
"cannot issue Data: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
psli->sli_flag, MBX_NOWAIT);
goto out_not_finished;
}
lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
- uint8_t actcmd = MBX_HEARTBEAT;
unsigned long timeout;
+ timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies;
spin_lock_irq(&phba->hbalock);
psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
spin_unlock_irq(&phba->hbalock);
if (psli->sli_flag & LPFC_SLI_ACTIVE) {
spin_lock_irq(&phba->hbalock);
- if (phba->sli.mbox_active)
- actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
- spin_unlock_irq(&phba->hbalock);
/* Determine how long we might wait for the active mailbox
* command to be gracefully completed by firmware.
*/
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) *
- 1000) + jiffies;
+ if (phba->sli.mbox_active)
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
+ phba->sli.mbox_active) *
+ 1000) + jiffies;
+ spin_unlock_irq(&phba->hbalock);
+
while (phba->sli.mbox_active) {
/* Check active mailbox complete status every 2ms */
msleep(2);
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
/* The IOCTL status is embedded in the mailbox subheader. */
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
if (!mboxq)
return -ENOMEM;
lpfc_init_vpi(phba, mboxq, vport->vpi);
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_INIT_VPI);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
if (rc != MBX_SUCCESS) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_SLI,
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
/* The IOCTL status is embedded in the mailbox subheader. */
projects / firefly-linux-kernel-4.4.55.git / commitdiff