Written by Amit Daniel Kachhap <amit.kachhap@linaro.org>
-Updated: 12 May 2012
+Updated: 6 Jan 2015
Copyright (c) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com)
clip_cpus: cpumask of cpus where the frequency constraints will happen.
-1.1.2 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
+1.1.2 struct thermal_cooling_device *of_cpufreq_cooling_register(
+ struct device_node *np, const struct cpumask *clip_cpus)
+
+ This interface function registers the cpufreq cooling device with
+ the name "thermal-cpufreq-%x" linking it with a device tree node, in
+ order to bind it via the thermal DT code. This api can support multiple
+ instances of cpufreq cooling devices.
+
+ np: pointer to the cooling device device tree node
+ clip_cpus: cpumask of cpus where the frequency constraints will happen.
+
+1.1.3 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
This interface function unregisters the "thermal-cpufreq-%x" cooling device.
TI BANDGAP AND THERMAL DRIVER
M: Eduardo Valentin <edubezval@gmail.com>
L: linux-pm@vger.kernel.org
-S: Supported
+L: linux-omap@vger.kernel.org
+S: Maintained
F: drivers/thermal/ti-soc-thermal/
TI CLOCK DRIVER
regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP);
regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
data->mode = THERMAL_DEVICE_DISABLED;
+ clk_disable_unprepare(data->thermal_clk);
return 0;
}
struct imx_thermal_data *data = dev_get_drvdata(dev);
struct regmap *map = data->tempmon;
+ clk_prepare_enable(data->thermal_clk);
/* Enabled thermal sensor after resume */
regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
*
* Return: pointer to trip points table, NULL otherwise
*/
-const struct thermal_trip * const
+const struct thermal_trip *
of_thermal_get_trip_points(struct thermal_zone_device *tz)
{
struct __thermal_zone *data = tz->devdata;
struct mutex lock;
struct list_head list;
int id;
- int ctemp;
+ u32 ctemp;
};
#define rcar_thermal_for_each_priv(pos, common) \
{
struct device *dev = rcar_priv_to_dev(priv);
int i;
- int ctemp, old, new;
+ u32 ctemp, old, new;
int ret = -EINVAL;
mutex_lock(&priv->lock);
int i;
int ret = -ENODEV;
int idle = IDLE_INTERVAL;
+ u32 enr_bits = 0;
common = devm_kzalloc(dev, sizeof(*common), GFP_KERNEL);
if (!common)
/*
* platform has IRQ support.
- * Then, drier use common register
+ * Then, driver uses common registers
*/
ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0,
if (IS_ERR(common->base))
return PTR_ERR(common->base);
- /* enable temperature comparation */
- rcar_thermal_common_write(common, ENR, 0x00030303);
-
idle = 0; /* polling delay is not needed */
}
rcar_thermal_irq_enable(priv);
list_move_tail(&priv->list, &common->head);
+
+ /* update ENR bits */
+ enr_bits |= 3 << (i * 8);
}
+ /* enable temperature comparation */
+ if (irq)
+ rcar_thermal_common_write(common, ENR, enr_bits);
+
platform_set_drvdata(pdev, common);
dev_info(dev, "%d sensor probed\n", i);
void of_thermal_destroy_zones(void);
int of_thermal_get_ntrips(struct thermal_zone_device *);
bool of_thermal_is_trip_valid(struct thermal_zone_device *, int);
-const struct thermal_trip * const
+const struct thermal_trip *
of_thermal_get_trip_points(struct thermal_zone_device *);
#else
static inline int of_parse_thermal_zones(void) { return 0; }
{
return 0;
}
-static inline const struct thermal_trip * const
+static inline const struct thermal_trip *
of_thermal_get_trip_points(struct thermal_zone_device *tz)
{
return NULL;