Staging: rtxxx0: remove private debugging ioctls
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sun, 16 Aug 2009 19:31:56 +0000 (21:31 +0200)
committerGreg Kroah-Hartman <gregkh@suse.de>
Tue, 15 Sep 2009 19:02:19 +0000 (12:02 -0700)
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/rt2860/oid.h
drivers/staging/rt2860/sta_ioctl.c

index 61fbe93703915e9e72d8ad4a5a6b52e19d0013bd..86b29a45dac468d74ceea1882e5335a8abb82365 100644 (file)
@@ -627,13 +627,6 @@ typedef struct _NDIS_802_11_CAPABILITY
 #define RT_PRIV_IOCTL_EXT                                                      (SIOCIWFIRSTPRIV + 0x01) // Sync. with AP for wsc upnp daemon
 #define RTPRIV_IOCTL_SET                                                       (SIOCIWFIRSTPRIV + 0x02)
 
-#ifdef DBG
-#define RTPRIV_IOCTL_BBP                            (SIOCIWFIRSTPRIV + 0x03)
-#define RTPRIV_IOCTL_MAC                            (SIOCIWFIRSTPRIV + 0x05)
-#define RTPRIV_IOCTL_RF                             (SIOCIWFIRSTPRIV + 0x13)
-#define RTPRIV_IOCTL_E2P                            (SIOCIWFIRSTPRIV + 0x07)
-#endif
-
 #define RTPRIV_IOCTL_STATISTICS                     (SIOCIWFIRSTPRIV + 0x09)
 #define RTPRIV_IOCTL_ADD_PMKID_CACHE                (SIOCIWFIRSTPRIV + 0x0A)
 #define RTPRIV_IOCTL_RADIUS_DATA                    (SIOCIWFIRSTPRIV + 0x0C)
index 87416bf737c3e4b751da0f5a7cce6c0eac519da2..b3cc151b42632ed6a2581198da34d072cccd3f88 100644 (file)
@@ -93,23 +93,6 @@ struct iw_priv_args privtab[] = {
 #endif
 /* --- sub-ioctls relations --- */
 
-#ifdef DBG
-{ RTPRIV_IOCTL_BBP,
-  IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  "bbp"},
-{ RTPRIV_IOCTL_MAC,
-  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
-  "mac"},
-#ifdef RT30xx
-{ RTPRIV_IOCTL_RF,
-  IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  "rf"},
-#endif // RT30xx //
-{ RTPRIV_IOCTL_E2P,
-  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
-  "e2p"},
-#endif  /* DBG */
-
 { RTPRIV_IOCTL_STATISTICS,
   0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
   "stat"},
@@ -173,29 +156,6 @@ INT Set_Wpa_Support(
     IN PRTMP_ADAPTER   pAd,
        IN      PUCHAR                  arg);
 
-#ifdef DBG
-#if !defined(RT2860) && !defined(RT30xx)
-VOID RTMPIoctlBBP(
-       IN      PRTMP_ADAPTER   pAdapter,
-       IN      struct iwreq    *wrq);
-#endif
-
-VOID RTMPIoctlMAC(
-       IN      PRTMP_ADAPTER   pAdapter,
-       IN      struct iwreq    *wrq);
-
-VOID RTMPIoctlE2PROM(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  struct iwreq    *wrq);
-
-#ifdef RT30xx
-VOID RTMPIoctlRF(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  struct iwreq    *wrq);
-#endif // RT30xx //
-#endif // DBG //
-
-
 NDIS_STATUS RTMPWPANoneAddKeyProc(
     IN  PRTMP_ADAPTER   pAd,
     IN PVOID                   pBuf);
@@ -2543,138 +2503,6 @@ int rt_ioctl_siwpmksa(struct net_device *dev,
        return 0;
 }
 
-#ifdef DBG
-static int
-rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
-               struct iw_point *wrq, char *extra)
-                       {
-       CHAR                            *this_char;
-       CHAR                            *value = NULL;
-       UCHAR                           regBBP = 0;
-       UINT32                          bbpId;
-       UINT32                          bbpValue;
-       BOOLEAN                         bIsPrintAllBBP = FALSE;
-       INT                                     Status = 0;
-    PRTMP_ADAPTER       pAdapter = dev->ml_priv;
-
-
-       memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-
-       if (wrq->length > 1) //No parameters.
-                               {
-               sprintf(extra, "\n");
-
-               //Parsing Read or Write
-               this_char = wrq->pointer;
-               DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s\n", this_char));
-               if (!*this_char)
-                       goto next;
-
-               if ((value = rtstrchr(this_char, '=')) != NULL)
-                       *value++ = 0;
-
-               if (!value || !*value)
-               { //Read
-                       DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s, value=%s\n", this_char, value));
-                       if (sscanf(this_char, "%d", &(bbpId)) == 1)
-                       {
-#ifndef RT30xx
-                               if (bbpId <= 136)
-#endif // RT30xx //
-#ifdef RT30xx
-                               if (bbpId <= 138)  // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control
-#endif // RT30xx //
-                               {
-                                       {
-                                       RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-                                       }
-                                       sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId*2, regBBP);
-                    wrq->length = strlen(extra) + 1; // 1: size of '\0'
-                                       DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra));
-                               }
-                               else
-                               {//Invalid parametes, so default printk all bbp
-                                       bIsPrintAllBBP = TRUE;
-                                       goto next;
-                               }
-                       }
-                       else
-                       { //Invalid parametes, so default printk all bbp
-                               bIsPrintAllBBP = TRUE;
-                               goto next;
-                       }
-               }
-               else
-               { //Write
-                       if ((sscanf(this_char, "%d", &(bbpId)) == 1) && (sscanf(value, "%x", &(bbpValue)) == 1))
-                       {
-#ifndef RT30xx
-                               if (bbpId <= 136)
-#endif // RT30xx //
-#ifdef RT30xx
-                               if (bbpId <= 138)  // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control
-#endif // RT30xx //
-                               {
-                                       {
-                                           RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
-                                       //Read it back for showing
-                                       RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-                       }
-                                       sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId*2, regBBP);
-                    wrq->length = strlen(extra) + 1; // 1: size of '\0'
-                                       DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra));
-                               }
-                               else
-                               {//Invalid parametes, so default printk all bbp
-                                       bIsPrintAllBBP = TRUE;
-                                       goto next;
-                               }
-                       }
-                       else
-                       { //Invalid parametes, so default printk all bbp
-                               bIsPrintAllBBP = TRUE;
-                               goto next;
-                       }
-               }
-               }
-       else
-               bIsPrintAllBBP = TRUE;
-
-next:
-       if (bIsPrintAllBBP)
-       {
-               memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-               sprintf(extra, "\n");
-#ifndef RT30xx
-               for (bbpId = 0; bbpId <= 136; bbpId++)
-#endif // RT30xx //
-#ifdef RT30xx
-               for (bbpId = 0; bbpId <= 138; bbpId++)  // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control
-#endif // RT30xx //
-               {
-                   if (strlen(extra) >= (IW_PRIV_SIZE_MASK - 10))
-                break;
-                       RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-#ifndef RT30xx
-                       sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X    ", bbpId, bbpId*2, regBBP);
-                       if (bbpId%5 == 4)
-                               sprintf(extra+strlen(extra), "\n");
-#endif
-#ifdef RT30xx
-                       sprintf(extra+strlen(extra), "%03d = %02X\n", bbpId, regBBP);  // edit by johnli, change display format
-#endif
-               }
-
-        wrq->length = strlen(extra) + 1; // 1: size of '\0'
-        DBGPRINT(RT_DEBUG_TRACE, ("wrq->length = %d\n", wrq->length));
-       }
-
-       DBGPRINT(RT_DEBUG_TRACE, ("<==rt_private_ioctl_bbp\n\n"));
-
-    return Status;
-}
-#endif // DBG //
-
 int rt_ioctl_siwrate(struct net_device *dev,
                        struct iw_request_info *info,
                        union iwreq_data *wrqu, char *extra)
@@ -2848,11 +2676,7 @@ static const iw_handler rt_priv_handlers[] = {
        (iw_handler) NULL, /* + 0x00 */
        (iw_handler) NULL, /* + 0x01 */
        (iw_handler) rt_ioctl_setparam, /* + 0x02 */
-#ifdef DBG
-       (iw_handler) rt_private_ioctl_bbp, /* + 0x03 */
-#else
        (iw_handler) NULL, /* + 0x03 */
-#endif
        (iw_handler) NULL, /* + 0x04 */
        (iw_handler) NULL, /* + 0x05 */
        (iw_handler) NULL, /* + 0x06 */
@@ -4911,19 +4735,6 @@ INT rt28xx_sta_ioctl(
                case RTPRIV_IOCTL_GSITESURVEY:
                        RTMPIoctlGetSiteSurvey(pAd, wrq);
                    break;
-#ifdef DBG
-               case RTPRIV_IOCTL_MAC:
-                       RTMPIoctlMAC(pAd, wrq);
-                       break;
-               case RTPRIV_IOCTL_E2P:
-                       RTMPIoctlE2PROM(pAd, wrq);
-                       break;
-#ifdef RT30xx
-               case RTPRIV_IOCTL_RF:
-                       RTMPIoctlRF(pAd, wrq);
-                       break;
-#endif // RT30xx //
-#endif // DBG //
         case SIOCETHTOOL:
                 break;
                default:
@@ -5822,592 +5633,6 @@ INT Set_Wpa_Support(
     return TRUE;
 }
 
-#ifdef DBG
-/*
-    ==========================================================================
-    Description:
-        Read / Write MAC
-    Arguments:
-        pAdapter                    Pointer to our adapter
-        wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 mac 0        ==> read MAC where Addr=0x0
-               2.) iwpriv ra0 mac 0=12     ==> write MAC where Addr=0x0, value=12
-    ==========================================================================
-*/
-VOID RTMPIoctlMAC(
-       IN      PRTMP_ADAPTER   pAdapter,
-       IN      struct iwreq    *wrq)
-{
-       CHAR                            *this_char;
-       CHAR                            *value;
-       INT                                     j = 0, k = 0;
-       CHAR                            msg[1024];
-       CHAR                            arg[255];
-       ULONG                           macAddr = 0;
-       UCHAR                           temp[16], temp2[16];
-       UINT32                          macValue = 0;
-       INT                                     Status;
-#ifdef RT30xx
-       BOOLEAN                         bIsPrintAllMAC = FALSE;
-#endif
-
-       memset(msg, 0x00, 1024);
-       if (wrq->u.data.length > 1) //No parameters.
-       {
-           Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
-               sprintf(msg, "\n");
-
-               //Parsing Read or Write
-           this_char = arg;
-               if (!*this_char)
-                       goto next;
-
-               if ((value = rtstrchr(this_char, '=')) != NULL)
-                       *value++ = 0;
-
-               if (!value || !*value)
-               { //Read
-                       // Sanity check
-                       if(strlen(this_char) > 4)
-                               goto next;
-
-                       j = strlen(this_char);
-                       while(j-- > 0)
-                       {
-                               if(this_char[j] > 'f' || this_char[j] < '0')
-                                       return;
-                       }
-
-                       // Mac Addr
-                       k = j = strlen(this_char);
-                       while(j-- > 0)
-                       {
-                               this_char[4-k+j] = this_char[j];
-                       }
-
-                       while(k < 4)
-                               this_char[3-k++]='0';
-                       this_char[4]='\0';
-
-                       if(strlen(this_char) == 4)
-                       {
-                               AtoH(this_char, temp, 2);
-                               macAddr = *temp*256 + temp[1];
-                               if (macAddr < 0xFFFF)
-                               {
-                                       RTMP_IO_READ32(pAdapter, macAddr, &macValue);
-                                       DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%lx, MacValue=%x\n", macAddr, macValue));
-                                       sprintf(msg+strlen(msg), "[0x%08lX]:%08X  ", macAddr , macValue);
-                               }
-                               else
-#ifndef RT30xx
-                               {//Invalid parametes, so default printk all bbp
-#endif
-#ifdef RT30xx
-                               {//Invalid parametes, so default printk all mac
-                                       bIsPrintAllMAC = TRUE;
-#endif
-                                       goto next;
-                               }
-                       }
-               }
-               else
-               { //Write
-                       memcpy(&temp2, value, strlen(value));
-                       temp2[strlen(value)] = '\0';
-
-                       // Sanity check
-                       if((strlen(this_char) > 4) || strlen(temp2) > 8)
-                               goto next;
-
-                       j = strlen(this_char);
-                       while(j-- > 0)
-                       {
-                               if(this_char[j] > 'f' || this_char[j] < '0')
-                                       return;
-                       }
-
-                       j = strlen(temp2);
-                       while(j-- > 0)
-                       {
-                               if(temp2[j] > 'f' || temp2[j] < '0')
-                                       return;
-                       }
-
-                       //MAC Addr
-                       k = j = strlen(this_char);
-                       while(j-- > 0)
-                       {
-                               this_char[4-k+j] = this_char[j];
-                       }
-
-                       while(k < 4)
-                               this_char[3-k++]='0';
-                       this_char[4]='\0';
-
-                       //MAC value
-                       k = j = strlen(temp2);
-                       while(j-- > 0)
-                       {
-                               temp2[8-k+j] = temp2[j];
-                       }
-
-                       while(k < 8)
-                               temp2[7-k++]='0';
-                       temp2[8]='\0';
-
-                       {
-                               AtoH(this_char, temp, 2);
-                               macAddr = *temp*256 + temp[1];
-
-                               AtoH(temp2, temp, 4);
-                               macValue = *temp*256*256*256 + temp[1]*256*256 + temp[2]*256 + temp[3];
-
-                               // debug mode
-                               if (macAddr == (HW_DEBUG_SETTING_BASE + 4))
-                               {
-                                       // 0x2bf4: byte0 non-zero: enable R17 tuning, 0: disable R17 tuning
-                    if (macValue & 0x000000ff)
-                    {
-                        pAdapter->BbpTuning.bEnable = TRUE;
-                        DBGPRINT(RT_DEBUG_TRACE,("turn on R17 tuning\n"));
-                    }
-                    else
-                    {
-                        UCHAR R66;
-                        pAdapter->BbpTuning.bEnable = FALSE;
-                        R66 = 0x26 + GET_LNA_GAIN(pAdapter);
-                                               RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
-                        DBGPRINT(RT_DEBUG_TRACE,("turn off R17 tuning, restore to 0x%02x\n", R66));
-                    }
-                                       return;
-                               }
-
-                               DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%02lx, MacValue=0x%x\n", macAddr, macValue));
-
-                               RTMP_IO_WRITE32(pAdapter, macAddr, macValue);
-                               sprintf(msg+strlen(msg), "[0x%08lX]:%08X  ", macAddr, macValue);
-                       }
-               }
-       }
-#ifdef RT30xx
-       else
-               bIsPrintAllMAC = TRUE;
-#endif
-next:
-#ifdef RT30xx
-       if (bIsPrintAllMAC)
-       {
-               struct file             *file_w;
-               PCHAR                   fileName = "MacDump.txt";
-               mm_segment_t    orig_fs;
-
-               orig_fs = get_fs();
-               set_fs(KERNEL_DS);
-
-               // open file
-               file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0);
-               if (IS_ERR(file_w))
-               {
-                       DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __func__, -PTR_ERR(file_w), fileName));
-               }
-               else
-               {
-                       if (file_w->f_op && file_w->f_op->write)
-                       {
-                               file_w->f_pos = 0;
-                               macAddr = 0x1000;
-
-                               while (macAddr <= 0x1800)
-                               {
-                                       RTMP_IO_READ32(pAdapter, macAddr, &macValue);
-                                       sprintf(msg, "%08lx = %08X\n", macAddr, macValue);
-
-                                       // write data to file
-                                       file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos);
-
-                                       printk("%s", msg);
-                                       macAddr += 4;
-                               }
-                               sprintf(msg, "\nDump all MAC values to %s\n", fileName);
-                       }
-                       filp_close(file_w, NULL);
-               }
-               set_fs(orig_fs);
-       }
-#endif /* RT30xx */
-       if(strlen(msg) == 1)
-               sprintf(msg+strlen(msg), "===>Error command format!");
-
-       // Copy the information into the user buffer
-       wrq->u.data.length = strlen(msg);
-       Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
-       DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlMAC\n\n"));
-}
-
-/*
-    ==========================================================================
-    Description:
-        Read / Write E2PROM
-    Arguments:
-        pAdapter                    Pointer to our adapter
-        wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 e2p 0            ==> read E2PROM where Addr=0x0
-               2.) iwpriv ra0 e2p 0=1234    ==> write E2PROM where Addr=0x0, value=1234
-    ==========================================================================
-*/
-VOID RTMPIoctlE2PROM(
-       IN      PRTMP_ADAPTER   pAdapter,
-       IN      struct iwreq    *wrq)
-{
-       CHAR                            *this_char;
-       CHAR                            *value;
-       INT                                     j = 0, k = 0;
-       CHAR                            msg[1024];
-       CHAR                            arg[255];
-       USHORT                          eepAddr = 0;
-       UCHAR                           temp[16], temp2[16];
-       USHORT                          eepValue;
-       int                                     Status;
-#ifdef RT30xx
-       BOOLEAN                         bIsPrintAllE2P = FALSE;
-#endif
-
-       memset(msg, 0x00, 1024);
-       if (wrq->u.data.length > 1) //No parameters.
-       {
-           Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
-               sprintf(msg, "\n");
-
-           //Parsing Read or Write
-               this_char = arg;
-
-
-               if (!*this_char)
-                       goto next;
-
-               if ((value = rtstrchr(this_char, '=')) != NULL)
-                       *value++ = 0;
-
-               if (!value || !*value)
-               { //Read
-
-                       // Sanity check
-                       if(strlen(this_char) > 4)
-                               goto next;
-
-                       j = strlen(this_char);
-                       while(j-- > 0)
-                       {
-                               if(this_char[j] > 'f' || this_char[j] < '0')
-                                       return;
-                       }
-
-                       // E2PROM addr
-                       k = j = strlen(this_char);
-                       while(j-- > 0)
-                       {
-                               this_char[4-k+j] = this_char[j];
-                       }
-
-                       while(k < 4)
-                               this_char[3-k++]='0';
-                       this_char[4]='\0';
-
-                       if(strlen(this_char) == 4)
-                       {
-                               AtoH(this_char, temp, 2);
-                               eepAddr = *temp*256 + temp[1];
-                               if (eepAddr < 0xFFFF)
-                               {
-                                       RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue);
-                                       sprintf(msg+strlen(msg), "[0x%04X]:0x%04X  ", eepAddr , eepValue);
-                               }
-                               else
-                               {//Invalid parametes, so default printk all bbp
-#ifdef RT30xx
-                                       bIsPrintAllE2P = TRUE;
-#endif
-                                       goto next;
-                               }
-                       }
-               }
-               else
-               { //Write
-                       memcpy(&temp2, value, strlen(value));
-                       temp2[strlen(value)] = '\0';
-
-                       // Sanity check
-                       if((strlen(this_char) > 4) || strlen(temp2) > 8)
-                               goto next;
-
-                       j = strlen(this_char);
-                       while(j-- > 0)
-                       {
-                               if(this_char[j] > 'f' || this_char[j] < '0')
-                                       return;
-                       }
-                       j = strlen(temp2);
-                       while(j-- > 0)
-                       {
-                               if(temp2[j] > 'f' || temp2[j] < '0')
-                                       return;
-                       }
-
-                       //MAC Addr
-                       k = j = strlen(this_char);
-                       while(j-- > 0)
-                       {
-                               this_char[4-k+j] = this_char[j];
-                       }
-
-                       while(k < 4)
-                               this_char[3-k++]='0';
-                       this_char[4]='\0';
-
-                       //MAC value
-                       k = j = strlen(temp2);
-                       while(j-- > 0)
-                       {
-                               temp2[4-k+j] = temp2[j];
-                       }
-
-                       while(k < 4)
-                               temp2[3-k++]='0';
-                       temp2[4]='\0';
-
-                       AtoH(this_char, temp, 2);
-                       eepAddr = *temp*256 + temp[1];
-
-                       AtoH(temp2, temp, 2);
-                       eepValue = *temp*256 + temp[1];
-
-                       RT28xx_EEPROM_WRITE16(pAdapter, eepAddr, eepValue);
-                       sprintf(msg+strlen(msg), "[0x%02X]:%02X  ", eepAddr, eepValue);
-               }
-       }
-#ifdef RT30xx
-       else
-               bIsPrintAllE2P = TRUE;
-#endif
-next:
-#ifdef RT30xx
-       if (bIsPrintAllE2P)
-       {
-               struct file             *file_w;
-               PCHAR                   fileName = "EEPROMDump.txt";
-               mm_segment_t    orig_fs;
-
-               orig_fs = get_fs();
-               set_fs(KERNEL_DS);
-
-               // open file
-               file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0);
-               if (IS_ERR(file_w))
-               {
-                       DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __func__, -PTR_ERR(file_w), fileName));
-               }
-               else
-               {
-                       if (file_w->f_op && file_w->f_op->write)
-                       {
-                               file_w->f_pos = 0;
-                               eepAddr = 0x00;
-
-                               while (eepAddr <= 0xFE)
-                               {
-                                       RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue);
-                                       sprintf(msg, "%08x = %04x\n", eepAddr , eepValue);
-
-                                       // write data to file
-                                       file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos);
-
-                                       printk("%s", msg);
-                                       eepAddr += 2;
-                               }
-                               sprintf(msg, "\nDump all EEPROM values to %s\n", fileName);
-                       }
-                       filp_close(file_w, NULL);
-               }
-               set_fs(orig_fs);
-       }
-#endif /* RT30xx */
-       if(strlen(msg) == 1)
-               sprintf(msg+strlen(msg), "===>Error command format!");
-
-
-       // Copy the information into the user buffer
-       wrq->u.data.length = strlen(msg);
-       Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
-       DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlE2PROM\n"));
-}
-#ifdef RT30xx
-/*
-    ==========================================================================
-    Description:
-        Read / Write RF register
-Arguments:
-    pAdapter                    Pointer to our adapter
-    wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 rf                ==> read all RF registers
-               2.) iwpriv ra0 rf 1              ==> read RF where RegID=1
-               3.) iwpriv ra0 rf 1=10              ==> write RF R1=0x10
-    ==========================================================================
-*/
-VOID RTMPIoctlRF(
-       IN      PRTMP_ADAPTER   pAdapter,
-       IN      struct iwreq    *wrq)
-{
-       CHAR                            *this_char;
-       CHAR                            *value;
-       UCHAR                           regRF = 0;
-       CHAR                            msg[2048];
-       CHAR                            arg[255];
-       INT                                     rfId;
-       LONG                            rfValue;
-       int                                     Status;
-       BOOLEAN                         bIsPrintAllRF = FALSE;
-
-
-       memset(msg, 0x00, 2048);
-       if (wrq->u.data.length > 1) //No parameters.
-       {
-           Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
-               sprintf(msg, "\n");
-
-           //Parsing Read or Write
-               this_char = arg;
-               if (!*this_char)
-                       goto next;
-
-               if ((value = strchr(this_char, '=')) != NULL)
-                       *value++ = 0;
-
-               if (!value || !*value)
-               { //Read
-                       if (sscanf(this_char, "%d", &(rfId)) == 1)
-                       {
-                               if (rfId <= 31)
-                               {
-                                       // In RT2860 ATE mode, we do not load 8051 firmware.
-                                            //We must access RF directly.
-                    // For RT2870 ATE mode, ATE_RF_IO_WRITE8(/READ8)_BY_REG_ID are redefined.
-                                       // according to Andy, Gary, David require.
-                                       // the command rf shall read rf register directly for dubug.
-                                       // BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-                                       RT30xxReadRFRegister(pAdapter, rfId, &regRF);
-
-                                       sprintf(msg+strlen(msg), "R%02d[0x%02x]:%02X  ", rfId, rfId*2, regRF);
-                               }
-                               else
-                               {//Invalid parametes, so default printk all RF
-                                       bIsPrintAllRF = TRUE;
-                                       goto next;
-                               }
-                       }
-                       else
-                       { //Invalid parametes, so default printk all RF
-                               bIsPrintAllRF = TRUE;
-                               goto next;
-                       }
-               }
-               else
-               { //Write
-                       if ((sscanf(this_char, "%d", &(rfId)) == 1) && (sscanf(value, "%lx", &(rfValue)) == 1))
-                       {
-                               if (rfId <= 31)
-                               {
-                                       // In RT2860 ATE mode, we do not load 8051 firmware.
-                                       // We should access RF registers directly.
-                    // For RT2870 ATE mode, ATE_RF_IO_WRITE8/READ8_BY_REG_ID are redefined.
-                                               {
-                                                       // according to Andy, Gary, David require.
-                                                       // the command RF shall read/write RF register directly for dubug.
-                                                       //BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-                                                       //BBP_IO_WRITE8_BY_REG_ID(pAdapter, (UCHAR)bbpId,(UCHAR) bbpValue);
-                                                       RT30xxReadRFRegister(pAdapter, rfId, &regRF);
-                                                       RT30xxWriteRFRegister(pAdapter, (UCHAR)rfId,(UCHAR) rfValue);
-                                                       //Read it back for showing
-                                                       //BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-                                                       RT30xxReadRFRegister(pAdapter, rfId, &regRF);
-                                                       sprintf(msg+strlen(msg), "R%02d[0x%02X]:%02X\n", rfId, rfId*2, regRF);
-                                               }
-                               }
-                               else
-                               {//Invalid parametes, so default printk all RF
-                                       bIsPrintAllRF = TRUE;
-                               }
-                       }
-                       else
-                       { //Invalid parametes, so default printk all RF
-                               bIsPrintAllRF = TRUE;
-                       }
-               }
-       }
-       else
-               bIsPrintAllRF = TRUE;
-next:
-       if (bIsPrintAllRF)
-       {
-               memset(msg, 0x00, 2048);
-               sprintf(msg, "\n");
-               for (rfId = 0; rfId <= 31; rfId++)
-               {
-                       // according to Andy, Gary, David require.
-                       // the command RF shall read/write RF register directly for dubug.
-                       RT30xxReadRFRegister(pAdapter, rfId, &regRF);
-                       sprintf(msg+strlen(msg), "%03d = %02X\n", rfId, regRF);
-               }
-               // Copy the information into the user buffer
-               DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg)=%d\n", (UINT32)strlen(msg)));
-               wrq->u.data.length = strlen(msg);
-               if (copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length))
-               {
-                       DBGPRINT(RT_DEBUG_TRACE, ("%s: copy_to_user() fail\n", __func__));
-               }
-       }
-       else
-       {
-               if(strlen(msg) == 1)
-                       sprintf(msg+strlen(msg), "===>Error command format!");
-
-               DBGPRINT(RT_DEBUG_TRACE, ("copy to user [msg=%s]\n", msg));
-               // Copy the information into the user buffer
-               DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg) =%d\n", (UINT32)strlen(msg)));
-
-               // Copy the information into the user buffer
-               wrq->u.data.length = strlen(msg);
-               Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-       }
-
-       DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlRF\n\n"));
-}
-#endif // RT30xx //
-#endif // DBG //
-
-
-
-
 INT Set_TGnWifiTest_Proc(
     IN  PRTMP_ADAPTER   pAd,
     IN  PUCHAR          arg)