[PATCH] ntp whitespace cleanup
authorAndrew Morton <akpm@osdl.org>
Sun, 30 Oct 2005 23:01:42 +0000 (15:01 -0800)
committerLinus Torvalds <torvalds@g5.osdl.org>
Mon, 31 Oct 2005 01:37:18 +0000 (17:37 -0800)
Fix bizarre 4-space coding style in the NTP code.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
kernel/timer.c

index 6b94adb45b03b0ccd1a239470347087393c8f886..cc18857601e2e6a67525d1cd1df94e372304efef 100644 (file)
@@ -632,77 +632,74 @@ long time_next_adjust;
  */
 static void second_overflow(void)
 {
-    long ltemp;
-
-    /* Bump the maxerror field */
-    time_maxerror += time_tolerance >> SHIFT_USEC;
-    if ( time_maxerror > NTP_PHASE_LIMIT ) {
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_status |= STA_UNSYNC;
-    }
-
-    /*
-     * Leap second processing. If in leap-insert state at
-     * the end of the day, the system clock is set back one
-     * second; if in leap-delete state, the system clock is
-     * set ahead one second. The microtime() routine or
-     * external clock driver will insure that reported time
-     * is always monotonic. The ugly divides should be
-     * replaced.
-     */
-    switch (time_state) {
-
-    case TIME_OK:
-       if (time_status & STA_INS)
-           time_state = TIME_INS;
-       else if (time_status & STA_DEL)
-           time_state = TIME_DEL;
-       break;
-
-    case TIME_INS:
-       if (xtime.tv_sec % 86400 == 0) {
-           xtime.tv_sec--;
-           wall_to_monotonic.tv_sec++;
-           /* The timer interpolator will make time change gradually instead
-            * of an immediate jump by one second.
-            */
-           time_interpolator_update(-NSEC_PER_SEC);
-           time_state = TIME_OOP;
-           clock_was_set();
-           printk(KERN_NOTICE "Clock: inserting leap second 23:59:60 UTC\n");
+       long ltemp;
+
+       /* Bump the maxerror field */
+       time_maxerror += time_tolerance >> SHIFT_USEC;
+       if (time_maxerror > NTP_PHASE_LIMIT) {
+               time_maxerror = NTP_PHASE_LIMIT;
+               time_status |= STA_UNSYNC;
        }
-       break;
-
-    case TIME_DEL:
-       if ((xtime.tv_sec + 1) % 86400 == 0) {
-           xtime.tv_sec++;
-           wall_to_monotonic.tv_sec--;
-           /* Use of time interpolator for a gradual change of time */
-           time_interpolator_update(NSEC_PER_SEC);
-           time_state = TIME_WAIT;
-           clock_was_set();
-           printk(KERN_NOTICE "Clock: deleting leap second 23:59:59 UTC\n");
+
+       /*
+        * Leap second processing. If in leap-insert state at the end of the
+        * day, the system clock is set back one second; if in leap-delete
+        * state, the system clock is set ahead one second. The microtime()
+        * routine or external clock driver will insure that reported time is
+        * always monotonic. The ugly divides should be replaced.
+        */
+       switch (time_state) {
+       case TIME_OK:
+               if (time_status & STA_INS)
+                       time_state = TIME_INS;
+               else if (time_status & STA_DEL)
+                       time_state = TIME_DEL;
+               break;
+       case TIME_INS:
+               if (xtime.tv_sec % 86400 == 0) {
+                       xtime.tv_sec--;
+                       wall_to_monotonic.tv_sec++;
+                       /*
+                        * The timer interpolator will make time change
+                        * gradually instead of an immediate jump by one second
+                        */
+                       time_interpolator_update(-NSEC_PER_SEC);
+                       time_state = TIME_OOP;
+                       clock_was_set();
+                       printk(KERN_NOTICE "Clock: inserting leap second "
+                                       "23:59:60 UTC\n");
+               }
+               break;
+       case TIME_DEL:
+               if ((xtime.tv_sec + 1) % 86400 == 0) {
+                       xtime.tv_sec++;
+                       wall_to_monotonic.tv_sec--;
+                       /*
+                        * Use of time interpolator for a gradual change of
+                        * time
+                        */
+                       time_interpolator_update(NSEC_PER_SEC);
+                       time_state = TIME_WAIT;
+                       clock_was_set();
+                       printk(KERN_NOTICE "Clock: deleting leap second "
+                                       "23:59:59 UTC\n");
+               }
+               break;
+       case TIME_OOP:
+               time_state = TIME_WAIT;
+               break;
+       case TIME_WAIT:
+               if (!(time_status & (STA_INS | STA_DEL)))
+               time_state = TIME_OK;
        }
-       break;
-
-    case TIME_OOP:
-       time_state = TIME_WAIT;
-       break;
-
-    case TIME_WAIT:
-       if (!(time_status & (STA_INS | STA_DEL)))
-           time_state = TIME_OK;
-    }
-
-    /*
-     * Compute the phase adjustment for the next second. In
-     * PLL mode, the offset is reduced by a fixed factor
-     * times the time constant. In FLL mode the offset is
-     * used directly. In either mode, the maximum phase
-     * adjustment for each second is clamped so as to spread
-     * the adjustment over not more than the number of
-     * seconds between updates.
-     */
+
+       /*
+        * Compute the phase adjustment for the next second. In PLL mode, the
+        * offset is reduced by a fixed factor times the time constant. In FLL
+        * mode the offset is used directly. In either mode, the maximum phase
+        * adjustment for each second is clamped so as to spread the adjustment
+        * over not more than the number of seconds between updates.
+        */
        ltemp = time_offset;
        if (!(time_status & STA_FLL))
                ltemp = shift_right(ltemp, SHIFT_KG + time_constant);
@@ -711,40 +708,42 @@ static void second_overflow(void)
        time_offset -= ltemp;
        time_adj = ltemp << (SHIFT_SCALE - SHIFT_HZ - SHIFT_UPDATE);
 
-    /*
-     * Compute the frequency estimate and additional phase
-     * adjustment due to frequency error for the next
-     * second. When the PPS signal is engaged, gnaw on the
-     * watchdog counter and update the frequency computed by
-     * the pll and the PPS signal.
-     */
-    pps_valid++;
-    if (pps_valid == PPS_VALID) {      /* PPS signal lost */
-       pps_jitter = MAXTIME;
-       pps_stabil = MAXFREQ;
-       time_status &= ~(STA_PPSSIGNAL | STA_PPSJITTER |
-                        STA_PPSWANDER | STA_PPSERROR);
-    }
-    ltemp = time_freq + pps_freq;
-    time_adj += shift_right(ltemp,(SHIFT_USEC + SHIFT_HZ - SHIFT_SCALE));
+       /*
+        * Compute the frequency estimate and additional phase adjustment due
+        * to frequency error for the next second. When the PPS signal is
+        * engaged, gnaw on the watchdog counter and update the frequency
+        * computed by the pll and the PPS signal.
+        */
+       pps_valid++;
+       if (pps_valid == PPS_VALID) {   /* PPS signal lost */
+               pps_jitter = MAXTIME;
+               pps_stabil = MAXFREQ;
+               time_status &= ~(STA_PPSSIGNAL | STA_PPSJITTER |
+                               STA_PPSWANDER | STA_PPSERROR);
+       }
+       ltemp = time_freq + pps_freq;
+       time_adj += shift_right(ltemp,(SHIFT_USEC + SHIFT_HZ - SHIFT_SCALE));
 
 #if HZ == 100
-    /* Compensate for (HZ==100) != (1 << SHIFT_HZ).
-     * Add 25% and 3.125% to get 128.125; => only 0.125% error (p. 14)
-     */
-    time_adj += shift_right(time_adj, 2) + shift_right(time_adj, 5);
+       /*
+        * Compensate for (HZ==100) != (1 << SHIFT_HZ).  Add 25% and 3.125% to
+        * get 128.125; => only 0.125% error (p. 14)
+        */
+       time_adj += shift_right(time_adj, 2) + shift_right(time_adj, 5);
 #endif
 #if HZ == 250
-    /* Compensate for (HZ==250) != (1 << SHIFT_HZ).
-     * Add 1.5625% and 0.78125% to get 255.85938; => only 0.05% error (p. 14)
-     */
-    time_adj += shift_right(time_adj, 6) + shift_right(time_adj, 7);
+       /*
+        * Compensate for (HZ==250) != (1 << SHIFT_HZ).  Add 1.5625% and
+        * 0.78125% to get 255.85938; => only 0.05% error (p. 14)
+        */
+       time_adj += shift_right(time_adj, 6) + shift_right(time_adj, 7);
 #endif
 #if HZ == 1000
-    /* Compensate for (HZ==1000) != (1 << SHIFT_HZ).
-     * Add 1.5625% and 0.78125% to get 1023.4375; => only 0.05% error (p. 14)
-     */
-    time_adj += shift_right(time_adj, 6) + shift_right(time_adj, 7);
+       /*
+        * Compensate for (HZ==1000) != (1 << SHIFT_HZ).  Add 1.5625% and
+        * 0.78125% to get 1023.4375; => only 0.05% error (p. 14)
+        */
+       time_adj += shift_right(time_adj, 6) + shift_right(time_adj, 7);
 #endif
 }
 
@@ -753,21 +752,20 @@ static void update_wall_time_one_tick(void)
 {
        long time_adjust_step, delta_nsec;
 
-       if ( (time_adjust_step = time_adjust) != 0 ) {
-           /* We are doing an adjtime thing. 
-            *
-            * Prepare time_adjust_step to be within bounds.
-            * Note that a positive time_adjust means we want the clock
-            * to run faster.
-            *
-            * Limit the amount of the step to be in the range
-            * -tickadj .. +tickadj
-            */
-            time_adjust_step = min(time_adjust_step, (long)tickadj);
-            time_adjust_step = max(time_adjust_step, (long)-tickadj);
-
-           /* Reduce by this step the amount of time left  */
-           time_adjust -= time_adjust_step;
+       if ((time_adjust_step = time_adjust) != 0 ) {
+               /*
+                * We are doing an adjtime thing.  Prepare time_adjust_step to
+                * be within bounds.  Note that a positive time_adjust means we
+                * want the clock to run faster.
+                *
+                * Limit the amount of the step to be in the range
+                * -tickadj .. +tickadj
+                */
+               time_adjust_step = min(time_adjust_step, (long)tickadj);
+               time_adjust_step = max(time_adjust_step, (long)-tickadj);
+
+               /* Reduce by this step the amount of time left  */
+               time_adjust -= time_adjust_step;
        }
        delta_nsec = tick_nsec + time_adjust_step * 1000;
        /*
@@ -1106,8 +1104,8 @@ fastcall signed long __sched schedule_timeout(signed long timeout)
                if (timeout < 0)
                {
                        printk(KERN_ERR "schedule_timeout: wrong timeout "
-                              "value %lx from %p\n", timeout,
-                              __builtin_return_address(0));
+                               "value %lx from %p\n", timeout,
+                               __builtin_return_address(0));
                        current->state = TASK_RUNNING;
                        goto out;
                }
@@ -1133,15 +1131,15 @@ EXPORT_SYMBOL(schedule_timeout);
  */
 signed long __sched schedule_timeout_interruptible(signed long timeout)
 {
-       __set_current_state(TASK_INTERRUPTIBLE);
-       return schedule_timeout(timeout);
+       __set_current_state(TASK_INTERRUPTIBLE);
+       return schedule_timeout(timeout);
 }
 EXPORT_SYMBOL(schedule_timeout_interruptible);
 
 signed long __sched schedule_timeout_uninterruptible(signed long timeout)
 {
-       __set_current_state(TASK_UNINTERRUPTIBLE);
-       return schedule_timeout(timeout);
+       __set_current_state(TASK_UNINTERRUPTIBLE);
+       return schedule_timeout(timeout);
 }
 EXPORT_SYMBOL(schedule_timeout_uninterruptible);
 
@@ -1481,16 +1479,18 @@ static void time_interpolator_update(long delta_nsec)
        if (!time_interpolator)
                return;
 
-       /* The interpolator compensates for late ticks by accumulating
-         * the late time in time_interpolator->offset. A tick earlier than
-        * expected will lead to a reset of the offset and a corresponding
-        * jump of the clock forward. Again this only works if the
-        * interpolator clock is running slightly slower than the regular clock
-        * and the tuning logic insures that.
-         */
+       /*
+        * The interpolator compensates for late ticks by accumulating the late
+        * time in time_interpolator->offset. A tick earlier than expected will
+        * lead to a reset of the offset and a corresponding jump of the clock
+        * forward. Again this only works if the interpolator clock is running
+        * slightly slower than the regular clock and the tuning logic insures
+        * that.
+        */
 
        counter = time_interpolator_get_counter(1);
-       offset = time_interpolator->offset + GET_TI_NSECS(counter, time_interpolator);
+       offset = time_interpolator->offset +
+                       GET_TI_NSECS(counter, time_interpolator);
 
        if (delta_nsec < 0 || (unsigned long) delta_nsec < offset)
                time_interpolator->offset = offset - delta_nsec;