ARM: dts: Add SYSREG block node for S5P/Exynos4 SoC series
authorSylwester Nawrocki <s.nawrocki@samsung.com>
Thu, 4 Apr 2013 07:04:09 +0000 (16:04 +0900)
committerKukjin Kim <kgene.kim@samsung.com>
Mon, 8 Apr 2013 16:39:19 +0000 (01:39 +0900)
This patch adds device tree node for the SYSREG registers block
found in Samsung S5P/Exynos SoC series. The SYSREG module
generates control signals for the ARM CPU and various IP blocks
and buses. SYSREG block registers are exposed through APB bus
interface. A sysreg device tree node is to be associated with
mfd syscon driver and all SYSREG clients should use regmap
interface it provides. It allows to eliminate any possible races
and conflicts should different drivers attempt to concurrently
access same register.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Documentation/devicetree/bindings/arm/samsung/sysreg.txt [new file with mode: 0644]
arch/arm/boot/dts/exynos4.dtsi

diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt
new file mode 100644 (file)
index 0000000..5039c0a
--- /dev/null
@@ -0,0 +1,7 @@
+SAMSUNG S5P/Exynos SoC series System Registers (SYSREG)
+
+Properties:
+ - name : should be 'sysreg';
+ - compatible : should contain "samsung,<chip name>-sysreg", "syscon";
+   For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon";
+ - reg : offset and length of the register set.
index aa21e2e9665e2351c59ea246e8ea2f935b260cf1..800ff11fe6fb384552001911faa04f58a2d7d5ea 100644 (file)
                reg = <0x10440000 0x1000>;
        };
 
+       sys_reg: sysreg {
+               compatible = "samsung,exynos4-sysreg", "syscon";
+               reg = <0x10010000 0x400>;
+       };
+
        watchdog@10060000 {
                compatible = "samsung,s3c2410-wdt";
                reg = <0x10060000 0x100>;