usb: pch_udc: usb gadget device support for Intel Quark X1000
authorBryan O'Donoghue <bryan.odonoghue@intel.com>
Mon, 4 Aug 2014 17:22:54 +0000 (10:22 -0700)
committerFelipe Balbi <balbi@ti.com>
Wed, 20 Aug 2014 14:53:45 +0000 (09:53 -0500)
This patch is to enable the USB gadget device for Intel Quark X1000

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@intel.com>
Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Alvin (Weike) Chen <alvin.chen@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
drivers/usb/gadget/udc/Kconfig
drivers/usb/gadget/udc/pch_udc.c

index 5151f947a4f56119e56c9e6d445df29b4f1a6314..34ebaa68504c1b68c5e697ccfe0ed74524f1a4fc 100644 (file)
@@ -332,7 +332,7 @@ config USB_GOKU
           gadget drivers to also be dynamically linked.
 
 config USB_EG20T
-       tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
+       tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
        depends on PCI
        help
          This is a USB device driver for EG20T PCH.
@@ -353,6 +353,7 @@ config USB_EG20T
          ML7213/ML7831 is companion chip for Intel Atom E6xx series.
          ML7213/ML7831 is completely compatible for Intel EG20T PCH.
 
+         This driver can be used with Intel's Quark X1000 SOC platform
 #
 # LAST -- dummy/emulated controller
 #
index eb8c3bedb57abc20e7a9ccd4913700406b1958d5..460d953c91b6c9b540d2af185b3f2664ea39613b 100644 (file)
@@ -343,6 +343,7 @@ struct pch_vbus_gpio_data {
  * @setup_data:                Received setup data
  * @phys_addr:         of device memory
  * @base_addr:         for mapped device memory
+ * @bar:               Indicates which PCI BAR for USB regs
  * @irq:               IRQ line for the device
  * @cfg_data:          current cfg, intf, and alt in use
  * @vbus_gpio:         GPIO informaton for detecting VBUS
@@ -370,14 +371,17 @@ struct pch_udc_dev {
        struct usb_ctrlrequest          setup_data;
        unsigned long                   phys_addr;
        void __iomem                    *base_addr;
+       unsigned                        bar;
        unsigned                        irq;
        struct pch_udc_cfg_data         cfg_data;
        struct pch_vbus_gpio_data       vbus_gpio;
 };
 #define to_pch_udc(g)  (container_of((g), struct pch_udc_dev, gadget))
 
+#define PCH_UDC_PCI_BAR_QUARK_X1000    0
 #define PCH_UDC_PCI_BAR                        1
 #define PCI_DEVICE_ID_INTEL_EG20T_UDC  0x8808
+#define PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC    0x0939
 #define PCI_VENDOR_ID_ROHM             0x10DB
 #define PCI_DEVICE_ID_ML7213_IOH_UDC   0x801D
 #define PCI_DEVICE_ID_ML7831_IOH_UDC   0x8808
@@ -3076,7 +3080,7 @@ static void pch_udc_remove(struct pci_dev *pdev)
                iounmap(dev->base_addr);
        if (dev->mem_region)
                release_mem_region(dev->phys_addr,
-                                  pci_resource_len(pdev, PCH_UDC_PCI_BAR));
+                                  pci_resource_len(pdev, dev->bar));
        if (dev->active)
                pci_disable_device(pdev);
        kfree(dev);
@@ -3144,9 +3148,15 @@ static int pch_udc_probe(struct pci_dev *pdev,
        dev->active = 1;
        pci_set_drvdata(pdev, dev);
 
+       /* Determine BAR based on PCI ID */
+       if (id->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC)
+               dev->bar = PCH_UDC_PCI_BAR_QUARK_X1000;
+       else
+               dev->bar = PCH_UDC_PCI_BAR;
+
        /* PCI resource allocation */
-       resource = pci_resource_start(pdev, 1);
-       len = pci_resource_len(pdev, 1);
+       resource = pci_resource_start(pdev, dev->bar);
+       len = pci_resource_len(pdev, dev->bar);
 
        if (!request_mem_region(resource, len, KBUILD_MODNAME)) {
                dev_err(&pdev->dev, "%s: pci device used already\n", __func__);
@@ -3211,6 +3221,12 @@ finished:
 }
 
 static const struct pci_device_id pch_udc_pcidev_id[] = {
+       {
+               PCI_DEVICE(PCI_VENDOR_ID_INTEL,
+                          PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC),
+               .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+               .class_mask = 0xffffffff,
+       },
        {
                PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC),
                .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,