ACPI: thermal: create "thermal.psv=" to override passive trip points
authorLen Brown <len.brown@intel.com>
Sun, 12 Aug 2007 04:12:35 +0000 (00:12 -0400)
committerLen Brown <len.brown@intel.com>
Sun, 12 Aug 2007 04:12:35 +0000 (00:12 -0400)
"thermal.psv=-1" disables passive trip points
for all ACPI thermal zones.

"thermal.psv=C", where 'C' is degrees Celsius,
overrides all existing passive trip points
for all ACPI thermal zones.

thermal.psv is checked at module load time,
and in response to trip-point change events.

Note that if the system does not deliver thermal zone
temperature change events near the new trip-point,
then it will not be noticed.  To force your custom
trip point to be noticed, you may need to enable polling:
eg. thermal.tzp=3000 invokes polling every 5 minutes.

Note that once passive thermal throttling is invoked,
it has its own internal Thermal Sampling Period (_TSP),
that is unrelated to _TZP.

WARNING: disabling or raising a thermal trip point
may result in increased running temperature and
shorter hardware lifetime on some systems.

Signed-off-by: Len Brown <len.brown@intel.com>
Documentation/kernel-parameters.txt
drivers/acpi/thermal.c

index ed7d7913af8cc1a6460675d076665152a37cda6c..52e1c2d26a25e180a0eb78433d1c65e34ec619b1 100644 (file)
@@ -1823,6 +1823,10 @@ and is between 256 and 4096 characters. It is defined in the file
        thermal.off=    [HW,ACPI]
                        1: disable ACPI thermal control
 
+       thermal.psv=    [HW,ACPI]
+                       -1: disable all passive trip points
+                       <degrees C>: override all passive trip points to this value
+
        thermal.tzp=    [HW,ACPI]
                        Specify global default ACPI thermal zone polling rate
                        <deci-seconds>: poll all this frequency
index b6b3bec845473f68ac88576c38be0a12430ff46e..74e25be8abc9ad0eaa132318461da72f67ab6b91 100644 (file)
@@ -82,6 +82,10 @@ static int off;
 module_param(off, int, 0);
 MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.\n");
 
+static int psv;
+module_param(psv, int, 0644);
+MODULE_PARM_DESC(psv, "Disable or override all passive trip points.\n");
+
 static int acpi_thermal_add(struct acpi_device *device);
 static int acpi_thermal_remove(struct acpi_device *device, int type);
 static int acpi_thermal_resume(struct acpi_device *device);
@@ -343,9 +347,16 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 
        /* Passive: Processors (optional) */
 
-       status =
-           acpi_evaluate_integer(tz->device->handle, "_PSV", NULL,
-                                 &tz->trips.passive.temperature);
+       if (psv == -1) {
+               status = AE_SUPPORT;
+       } else if (psv > 0) {
+               tz->trips.passive.temperature = CELSIUS_TO_KELVIN(psv);
+               status = AE_OK;
+       } else {
+               status = acpi_evaluate_integer(tz->device->handle,
+                       "_PSV", NULL, &tz->trips.passive.temperature);
+       }
+
        if (ACPI_FAILURE(status)) {
                tz->trips.passive.flags.valid = 0;
                ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No passive threshold\n"));