#ifdef CONFIG_SDMMC_RK29_OLD
iomux_set(MMC0_CMD);
iomux_set(MMC0_CLKOUT);
- iomux_set(MMC0_DATA0);
- iomux_set(MMC0_DATA1);
- iomux_set(MMC0_DATA2);
- iomux_set(MMC0_DATA3);
+ iomux_set(MMC0_D0);
+ iomux_set(MMC0_D1);
+ iomux_set(MMC0_D2);
+ iomux_set(MMC0_D3);
iomux_set_gpio_mode(iomux_mode_to_gpio(MMC0_DETN));
--- /dev/null
+/*****************************************************************************************
+ * arch/arm/mach-rkxx/baord-xxx-sdmmc-config.c
+ *
+ * Copyright (C) 2013 ROCKCHIP, Inc.
+ *
+ * Description:
+ * define the gpio for SD-MMC-SDIO-Wifi functions according to your own projects.
+ *
+ * Author: Michael Xie
+ * 15 Jan,2013
+ * E-mail: xbw@rock-chips.com
+ *
+ ******************************************************************************************/
+
+/*
+** If you select the macro of CONFIG_SDMMC0_RK29_WRITE_PROTECT, You must define the following values.
+** Otherwise, there is no need to define the following values¡£
+*/
+//#define SDMMC0_WRITE_PROTECT_PIN RK30_PIN3_PB2 //According to your own project to set the value of write-protect-pin.
+//#define SDMMC0_WRITE_PROTECT_ENABLE_VALUE GPIO_HIGH
+
+/*
+** If you select the macro of CONFIG_SDMMC1_RK29_WRITE_PROTECT, You must define the following values.
+** Otherwise, there is no need to define the following values¡£
+*/
+//#define SDMMC1_WRITE_PROTECT_PIN RK30_PIN3_PB3 //According to your own project to set the value of write-protect-pin.
+//#define SDMMC1_WRITE_PROTECT_ENABLE_VALUE GPIO_HIGH
+
+/*
+** If you select the macro of CONFIG_RK29_SDIO_IRQ_FROM_GPIO, You must define the following values.
+** Otherwise, there is no need to define the following values¡£
+*/
+//#define RK29SDK_WIFI_SDIO_CARD_INT RK30_PIN3_PD2
+
+
+/*
+* define sdcard PowerEn-pin
+*/
+#define RK29SDK_SD_CARD_PWR_EN RK30_PIN3_PA1
+#define RK29SDK_SD_CARD_PWR_EN_LEVEL GPIO_LOW
+
+/*
+* define the card-detect-pin.
+*/
+#define RK29SDK_SD_CARD_DETECT_N RK30_PIN3_PB0 //According to your own project to set the value of card-detect-pin.
+#define RK29SDK_SD_CARD_INSERT_LEVEL GPIO_LOW // set the voltage of insert-card. Please pay attention to the default setting.
+
+/*
+* Define wifi module's power and reset gpio, and gpio sensitive level.
+* Please set the value according to your own project.
+*
+* Well, you just own engineering module to set the value in the corresponding module branch.
+* Otherwise, you do not define this macro, eliminate it.
+*
+*/
+#if defined(CONFIG_RTL8192CU) || defined(CONFIG_RTL8188EU)
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_LOW//GPIO_HIGH
+
+#elif defined(CONFIG_BCM4329) || defined(CONFIG_BCM4319) || defined(CONFIG_RK903) || defined(CONFIG_RK901)
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+
+ #define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN2_PA7
+ #define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+
+#elif defined(CONFIG_MT5931_MT6622) || defined(CONFIG_MT5931)
+
+ #ifdef CONFIG_MACH_RK3168_LR097
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+
+ //#define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN3_PD1
+ //#define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+
+ #else
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN0_PA5
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+
+ #define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN3_PD1
+ #define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+ #endif
+
+#elif defined(CONFIG_MT6620)
+ #define COMBO_MODULE_MT6620_CDT 1 // to control antsel2,antsel3 and gps_lan foot when using AcSip or Cdtech chip.
+ //- 1--use Cdtech chip; 0--unuse CDT chip
+
+ //power, PMU_EN
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PC7
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+ //reset, DAIRST,SYSRST_B
+ #define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN3_PD1
+ #define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+ //VDDIO
+ //#define RK30SDK_WIFI_GPIO_VCCIO_WL RK30_PIN0_PD2 //You do not get control of the foot, and you do not need to define the macro
+ //#define RK30SDK_WIFI_GPIO_VCCIO_WL_ENABLE_VALUE GPIO_HIGH
+ //WIFI_INT_B
+ #define RK30SDK_WIFI_GPIO_WIFI_INT_B RK30_PIN3_PD2
+ #define RK30SDK_WIFI_GPIO_WIFI_INT_B_ENABLE_VALUE GPIO_HIGH
+ //BGF_INT_B
+ #define RK30SDK_WIFI_GPIO_BGF_INT_B RK30_PIN6_PA7
+ #define RK30SDK_WIFI_GPIO_BGF_INT_B_ENABLE_VALUE GPIO_HIGH
+ //GPS_SYNC
+ #define RK30SDK_WIFI_GPIO_GPS_SYNC RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_GPS_SYNC_ENABLE_VALUE GPIO_HIGH
+
+ #if COMBO_MODULE_MT6620_CDT
+ //ANTSEL2
+ #define RK30SDK_WIFI_GPIO_ANTSEL2 RK30_PIN4_PD4
+ #define RK30SDK_WIFI_GPIO_ANTSEL2_ENABLE_VALUE GPIO_LOW //use 6620 in CDT chip, LOW--work; High--no work.
+ //ANTSEL3
+ #define RK30SDK_WIFI_GPIO_ANTSEL3 RK30_PIN4_PD3
+ #define RK30SDK_WIFI_GPIO_ANTSEL3_ENABLE_VALUE GPIO_HIGH //use 6620 in CDT chip, High--work; Low--no work..
+ //GPS_LAN
+ #define RK30SDK_WIFI_GPIO_GPS_LAN RK30_PIN4_PD6
+ #define RK30SDK_WIFI_GPIO_GPS_LAN_ENABLE_VALUE GPIO_HIGH //use 6620 in CDT chip, High--work; Low--no work..
+ #endif // #if COMBO_MODULE_MT6620_CDT--#endif
+#endif
+
+
* SDMMC devices, include the module of SD,MMC,and sdio.noted by xbw at 2012-03-05
**************************************************************************************************/
#ifdef CONFIG_SDMMC_RK29
-#include "board-rk30-sdk-sdmmc.c"
+#include "board-rk3168-ds1006h-sdmmc-config.c"
+#include "../plat-rk/rk-sdmmc-ops.c"
+#include "../plat-rk/rk-sdmmc-wifi.c"
#endif //endif ---#ifdef CONFIG_SDMMC_RK29
#ifdef CONFIG_SDMMC0_RK29
iomux_set(MMC0_D1);
iomux_set(MMC0_D2);
iomux_set(MMC0_D3);
- iomux_set(MMC0_DETN);
+
+ iomux_set_gpio_mode(iomux_mode_to_gpio(MMC0_DETN));
gpio_request(RK30_PIN3_PA7, "sdmmc-power");
gpio_direction_output(RK30_PIN3_PA7, GPIO_LOW);
rk29_sdmmc_set_iomux(0, 0xFFFF);
#if defined(CONFIG_SDMMC0_RK29_SDCARD_DET_FROM_GPIO)
+ #if SDMMC_USE_NEW_IOMUX_API
+ iomux_set_gpio_mode(iomux_gpio_to_mode(RK29SDK_SD_CARD_DETECT_N));
+ #else
rk30_mux_api_set(RK29SDK_SD_CARD_DETECT_PIN_NAME, RK29SDK_SD_CARD_DETECT_IOMUX_FGPIO);
+ #endif
#else
- rk30_mux_api_set(RK29SDK_SD_CARD_DETECT_PIN_NAME, RK29SDK_SD_CARD_DETECT_IOMUX_FMUX);
+ #if SDMMC_USE_NEW_IOMUX_API
+ iomux_set(MMC0_DETN);
+ #else
+ rk30_mux_api_set(RK29SDK_SD_CARD_DETECT_PIN_NAME, RK29SDK_SD_CARD_DETECT_IOMUX_FMUX);
+ #endif
#endif
#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
static int rk29_sdmmc1_cfg_gpio(void)
{
#if defined(CONFIG_SDMMC_RK29_OLD)
- iomux_set(MMC0_CMD);
- iomux_set(MMC0_CLKOUT);
- iomux_set(MMC0_D0);
- iomux_set(MMC0_D1);
- iomux_set(MMC0_D2);
- iomux_set(MMC0_D3);
+ iomux_set(MMC1_CMD);
+ iomux_set(MMC1_CLKOUT);
+ iomux_set(MMC1_D0);
+ iomux_set(MMC1_D1);
+ iomux_set(MMC1_D2);
+ iomux_set(MMC1_D3);
#else
#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
#ifdef CONFIG_SDMMC_RK29_OLD
iomux_set(MMC0_CMD);
iomux_set(MMC0_CLKOUT);
- iomux_set(MMC0_DATA0);
- iomux_set(MMC0_DATA1);
- iomux_set(MMC0_DATA2);
- iomux_set(MMC0_DATA3);
+ iomux_set(MMC0_D0);
+ iomux_set(MMC0_D1);
+ iomux_set(MMC0_D2);
+ iomux_set(MMC0_D3);
iomux_set_gpio_mode(iomux_mode_to_gpio(MMC0_DETN));
--- /dev/null
+/*****************************************************************************************
+ * arch/arm/mach-rkxx/baord-xxx-sdmmc-config.c
+ *
+ * Copyright (C) 2013 ROCKCHIP, Inc.
+ *
+ * Description:
+ * define the gpio for SD-MMC-SDIO-Wifi functions according to your own projects.
+ *
+ * Author: Michael Xie
+ * 15 Jan,2013
+ * E-mail: xbw@rock-chips.com
+ *
+ ******************************************************************************************/
+
+/*
+** If you select the macro of CONFIG_SDMMC0_RK29_WRITE_PROTECT, You must define the following values.
+** Otherwise, there is no need to define the following values¡£
+*/
+//#define SDMMC0_WRITE_PROTECT_PIN RK30_PIN3_PB2 //According to your own project to set the value of write-protect-pin.
+//#define SDMMC0_WRITE_PROTECT_ENABLE_VALUE GPIO_HIGH
+
+/*
+** If you select the macro of CONFIG_SDMMC1_RK29_WRITE_PROTECT, You must define the following values.
+** Otherwise, there is no need to define the following values¡£
+*/
+//#define SDMMC1_WRITE_PROTECT_PIN RK30_PIN3_PB3 //According to your own project to set the value of write-protect-pin.
+//#define SDMMC1_WRITE_PROTECT_ENABLE_VALUE GPIO_HIGH
+
+/*
+** If you select the macro of CONFIG_RK29_SDIO_IRQ_FROM_GPIO, You must define the following values.
+** Otherwise, there is no need to define the following values¡£
+*/
+//#define RK29SDK_WIFI_SDIO_CARD_INT RK30_PIN3_PD2
+
+
+/*
+* define sdcard PowerEn-pin
+*/
+#define RK29SDK_SD_CARD_PWR_EN RK30_PIN3_PA1
+#define RK29SDK_SD_CARD_PWR_EN_LEVEL GPIO_LOW
+
+/*
+* define the card-detect-pin.
+*/
+#define RK29SDK_SD_CARD_DETECT_N RK30_PIN3_PB0 //According to your own project to set the value of card-detect-pin.
+#define RK29SDK_SD_CARD_INSERT_LEVEL GPIO_LOW // set the voltage of insert-card. Please pay attention to the default setting.
+
+/*
+* Define wifi module's power and reset gpio, and gpio sensitive level.
+* Please set the value according to your own project.
+*
+* Well, you just own engineering module to set the value in the corresponding module branch.
+* Otherwise, you do not define this macro, eliminate it.
+*
+*/
+#if defined(CONFIG_RTL8192CU) || defined(CONFIG_RTL8188EU)
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_LOW//GPIO_HIGH
+
+#elif defined(CONFIG_BCM4329) || defined(CONFIG_BCM4319) || defined(CONFIG_RK903) || defined(CONFIG_RK901)
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+
+ #define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN2_PA7
+ #define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+
+#elif defined(CONFIG_MT5931_MT6622) || defined(CONFIG_MT5931)
+
+ #ifdef CONFIG_MACH_RK3168_LR097
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+
+ //#define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN3_PD1
+ //#define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+
+ #else
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN0_PA5
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+
+ #define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN3_PD1
+ #define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+ #endif
+
+#elif defined(CONFIG_MT6620)
+ #define COMBO_MODULE_MT6620_CDT 1 // to control antsel2,antsel3 and gps_lan foot when using AcSip or Cdtech chip.
+ //- 1--use Cdtech chip; 0--unuse CDT chip
+
+ //power, PMU_EN
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PC7
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+ //reset, DAIRST,SYSRST_B
+ #define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN3_PD1
+ #define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+ //VDDIO
+ //#define RK30SDK_WIFI_GPIO_VCCIO_WL RK30_PIN0_PD2 //You do not get control of the foot, and you do not need to define the macro
+ //#define RK30SDK_WIFI_GPIO_VCCIO_WL_ENABLE_VALUE GPIO_HIGH
+ //WIFI_INT_B
+ #define RK30SDK_WIFI_GPIO_WIFI_INT_B RK30_PIN3_PD2
+ #define RK30SDK_WIFI_GPIO_WIFI_INT_B_ENABLE_VALUE GPIO_HIGH
+ //BGF_INT_B
+ #define RK30SDK_WIFI_GPIO_BGF_INT_B RK30_PIN6_PA7
+ #define RK30SDK_WIFI_GPIO_BGF_INT_B_ENABLE_VALUE GPIO_HIGH
+ //GPS_SYNC
+ #define RK30SDK_WIFI_GPIO_GPS_SYNC RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_GPS_SYNC_ENABLE_VALUE GPIO_HIGH
+
+ #if COMBO_MODULE_MT6620_CDT
+ //ANTSEL2
+ #define RK30SDK_WIFI_GPIO_ANTSEL2 RK30_PIN4_PD4
+ #define RK30SDK_WIFI_GPIO_ANTSEL2_ENABLE_VALUE GPIO_LOW //use 6620 in CDT chip, LOW--work; High--no work.
+ //ANTSEL3
+ #define RK30SDK_WIFI_GPIO_ANTSEL3 RK30_PIN4_PD3
+ #define RK30SDK_WIFI_GPIO_ANTSEL3_ENABLE_VALUE GPIO_HIGH //use 6620 in CDT chip, High--work; Low--no work..
+ //GPS_LAN
+ #define RK30SDK_WIFI_GPIO_GPS_LAN RK30_PIN4_PD6
+ #define RK30SDK_WIFI_GPIO_GPS_LAN_ENABLE_VALUE GPIO_HIGH //use 6620 in CDT chip, High--work; Low--no work..
+ #endif // #if COMBO_MODULE_MT6620_CDT--#endif
+#endif
+
+
projects / firefly-linux-kernel-4.4.55.git / commitdiff