usb: wusbcore: fix stranded URB after HWA unplug
authorThomas Pugliese <thomas.pugliese@gmail.com>
Fri, 28 Feb 2014 20:31:56 +0000 (14:31 -0600)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Sat, 1 Mar 2014 00:13:09 +0000 (16:13 -0800)
This patch adds error checking to the abort request callback to forcibly
clean up the dequeued transfers if the abort request failed.  The
wa_complete_remaining_xfer_segs was modified so that it could be used in
this situation as well.  This fixes a stranded URB/PNP hang when the HWA
is unplugged while playing audio to a wireless audio device.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/wusbcore/wa-xfer.c

index 3ca055555105a315231d95e62b7b670532b453b9..cb061915f051485a3427edd8c22c599d3c5ef968 100644 (file)
@@ -167,6 +167,8 @@ struct wa_xfer {
 
 static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer,
        struct wa_seg *seg, int curr_iso_frame);
+static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer,
+               int starting_index, enum wa_seg_status status);
 
 static inline void wa_xfer_init(struct wa_xfer *xfer)
 {
@@ -416,12 +418,51 @@ out:
 
 struct wa_xfer_abort_buffer {
        struct urb urb;
+       struct wahc *wa;
        struct wa_xfer_abort cmd;
 };
 
 static void __wa_xfer_abort_cb(struct urb *urb)
 {
        struct wa_xfer_abort_buffer *b = urb->context;
+       struct wahc *wa = b->wa;
+
+       /*
+        * If the abort request URB failed, then the HWA did not get the abort
+        * command.  Forcibly clean up the xfer without waiting for a Transfer
+        * Result from the HWA.
+        */
+       if (urb->status < 0) {
+               struct wa_xfer *xfer;
+               struct device *dev = &wa->usb_iface->dev;
+
+               xfer = wa_xfer_get_by_id(wa, le32_to_cpu(b->cmd.dwTransferID));
+               dev_err(dev, "%s: Transfer Abort request failed. result: %d\n",
+                       __func__, urb->status);
+               if (xfer) {
+                       unsigned long flags;
+                       int done;
+                       struct wa_rpipe *rpipe = xfer->ep->hcpriv;
+
+                       dev_err(dev, "%s: cleaning up xfer %p ID 0x%08X.\n",
+                               __func__, xfer, wa_xfer_id(xfer));
+                       spin_lock_irqsave(&xfer->lock, flags);
+                       /* mark all segs as aborted. */
+                       wa_complete_remaining_xfer_segs(xfer, 0,
+                               WA_SEG_ABORTED);
+                       done = __wa_xfer_is_done(xfer);
+                       spin_unlock_irqrestore(&xfer->lock, flags);
+                       if (done)
+                               wa_xfer_completion(xfer);
+                       wa_xfer_delayed_run(rpipe);
+                       wa_xfer_put(xfer);
+               } else {
+                       dev_err(dev, "%s: xfer ID 0x%08X already gone.\n",
+                                __func__, le32_to_cpu(b->cmd.dwTransferID));
+               }
+       }
+
+       wa_put(wa);     /* taken in __wa_xfer_abort */
        usb_put_urb(&b->urb);
 }
 
@@ -449,6 +490,7 @@ static int __wa_xfer_abort(struct wa_xfer *xfer)
        b->cmd.bRequestType = WA_XFER_ABORT;
        b->cmd.wRPipe = rpipe->descr.wRPipeIndex;
        b->cmd.dwTransferID = wa_xfer_id_le32(xfer);
+       b->wa = wa_get(xfer->wa);
 
        usb_init_urb(&b->urb);
        usb_fill_bulk_urb(&b->urb, xfer->wa->usb_dev,
@@ -462,6 +504,7 @@ static int __wa_xfer_abort(struct wa_xfer *xfer)
 
 
 error_submit:
+       wa_put(xfer->wa);
        if (printk_ratelimit())
                dev_err(dev, "xfer %p: Can't submit abort request: %d\n",
                        xfer, result);
@@ -2036,15 +2079,17 @@ static int wa_xfer_status_to_errno(u8 status)
  * no other segment transfer results will be returned from the device.
  * Mark the remaining submitted or pending xfers as completed so that
  * the xfer will complete cleanly.
+ *
+ * xfer->lock must be held
+ *
  */
 static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer,
-               struct wa_seg *incoming_seg, enum wa_seg_status status)
+               int starting_index, enum wa_seg_status status)
 {
        int index;
        struct wa_rpipe *rpipe = xfer->ep->hcpriv;
 
-       for (index = incoming_seg->index + 1; index < xfer->segs_submitted;
-               index++) {
+       for (index = starting_index; index < xfer->segs_submitted; index++) {
                struct wa_seg *current_seg = xfer->seg[index];
 
                BUG_ON(current_seg == NULL);
@@ -2202,7 +2247,8 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer,
         * transfers with data or below for no data, the xfer will complete.
         */
        if (xfer_result->bTransferSegment & 0x80)
-               wa_complete_remaining_xfer_segs(xfer, seg, WA_SEG_DONE);
+               wa_complete_remaining_xfer_segs(xfer, seg->index + 1,
+                       WA_SEG_DONE);
        if (usb_pipeisoc(xfer->urb->pipe)
                && (le32_to_cpu(xfer_result->dwNumOfPackets) > 0)) {
                /* set up WA state to read the isoc packet status next. */
@@ -2253,7 +2299,7 @@ error_buf_in_populate:
 error_complete:
        xfer->segs_done++;
        rpipe_ready = rpipe_avail_inc(rpipe);
-       wa_complete_remaining_xfer_segs(xfer, seg, seg->status);
+       wa_complete_remaining_xfer_segs(xfer, seg->index + 1, seg->status);
        done = __wa_xfer_is_done(xfer);
        /*
         * queue work item to clear STALL for control endpoints.