Staging: heci: fix setting h_is bit in h_csr register
authorDongxiao Xu <dongxiao.xu@intel.com>
Sun, 31 May 2009 06:43:55 +0000 (14:43 +0800)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 19 Jun 2009 18:00:55 +0000 (11:00 -0700)
Host software could issue interrupts to ME firmware, using H_IG bit. While
Setting H_IG bit, host software should preserve all the other bits in H_CSR
unchanged. In the original function which sets H_CSR register, they first read
the register, then set some bits, and write the whole 32bits back to the
register. And that the special behavior of H_IS (write-one-to-zero) causes problem.
This patch fixes the issue in the following ways:

 - Modify heci_set_csr_register() function so that it doesn't change H_IS bit.
 - Add interface heci_csr_clear_his() to clear H_IS bit. This function is called
   after H_IS checking (dev->host_hw_state & H_IS == H_IS).
 - In original heci_csr_disable_interrupts() function, it not only clears H_IE
   bit, sometimes it also clears H_IS bit. This patch separates the two parts.
 - Avoid calling write_heci_register() function to set H_CSR register directly,
   and instead using heci_set_csr_register() function

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/heci/heci_init.c
drivers/staging/heci/heci_interface.c
drivers/staging/heci/heci_interface.h
drivers/staging/heci/interrupt.c

index 06ea1967e0e31ad998c2b30b8f2e0953bdcfbe00..427f55d7b262879cd05901bc3274c734245e43ce 100644 (file)
@@ -249,7 +249,7 @@ int heci_hw_init(struct iamt_heci_device *dev)
 
        if ((dev->host_hw_state & H_IS) == H_IS) {
                /* acknowledge interrupt and stop interupts */
-               heci_set_csr_register(dev);
+               heci_csr_clear_his(dev);
        }
        dev->recvd_msg = 0;
        DBG("reset in start the heci device.\n");
@@ -354,7 +354,7 @@ void heci_reset(struct iamt_heci_device *dev, int interrupts)
        dev->host_hw_state &= ~H_RST;
        dev->host_hw_state |= H_IG;
 
-       write_heci_register(dev, H_CSR, dev->host_hw_state);
+       heci_set_csr_register(dev);
 
        DBG("currently saved host_hw_state = 0x%08x.\n",
            dev->host_hw_state);
index c5f51a7ddf2c69f5f74a4ba1f38b8f922b34ab5d..03e1df1a88a08c16a3b8b7ab26c952e9d9a057f9 100644 (file)
 
 
 /**
- * heci_set_csr_register - write H_CSR register to the heci device
+ * heci_set_csr_register - write H_CSR register to the heci device,
+ * and ignore the H_IS bit for it is write-one-to-zero.
  *
  * @dev: device object for our driver
  */
 void heci_set_csr_register(struct iamt_heci_device *dev)
 {
+       if ((dev->host_hw_state & H_IS) == H_IS)
+               dev->host_hw_state &= ~H_IS;
        write_heci_register(dev, H_CSR, dev->host_hw_state);
        dev->host_hw_state = read_heci_register(dev, H_CSR);
 }
@@ -76,6 +79,16 @@ void heci_csr_disable_interrupts(struct iamt_heci_device *dev)
        heci_set_csr_register(dev);
 }
 
+/**
+ * heci_csr_clear_his - clear H_IS bit in H_CSR
+ *
+ * @dev: device object for our driver
+ */
+void heci_csr_clear_his(struct iamt_heci_device *dev)
+{
+       write_heci_register(dev, H_CSR, dev->host_hw_state);
+       dev->host_hw_state = read_heci_register(dev, H_CSR);
+}
 
 /**
  * _host_get_filled_slots - get number of device filled buffer slots
@@ -185,7 +198,7 @@ int heci_write_message(struct iamt_heci_device *dev,
        }
 
        dev->host_hw_state |= H_IG;
-       write_heci_register(dev, H_CSR, dev->host_hw_state);
+       heci_set_csr_register(dev);
        dev->me_hw_state = read_heci_register(dev, ME_CSR_HA);
        if ((dev->me_hw_state & ME_RDY_HRA) != ME_RDY_HRA)
                return 0;
index d9193cf6d9e9118762e7d8a5854b4936b437119b..34db7e52b8ef69b9dd2d78787a20f3221dbae85a 100644 (file)
@@ -133,6 +133,7 @@ enum client_disconnect_status_types{
 void heci_set_csr_register(struct iamt_heci_device *dev);
 void heci_csr_enable_interrupts(struct iamt_heci_device *dev);
 void heci_csr_disable_interrupts(struct iamt_heci_device *dev);
+void heci_csr_clear_his(struct iamt_heci_device *dev);
 
 void heci_read_slots(struct iamt_heci_device *dev,
                     unsigned char *buffer, unsigned long buffer_length);
index b7ce73be82650b2f0110d6260955533e04c4f9c3..3a510ed3a3d2b93c70f69520b2999dbf3d5e9c28 100644 (file)
@@ -92,6 +92,9 @@ irqreturn_t heci_isr_interrupt(int irq, void *dev_id)
        /* disable interrupts */
        heci_csr_disable_interrupts(dev);
 
+       /* clear H_IS bit in H_CSR */
+       heci_csr_clear_his(dev);
+
        /*
         * Our device interrupted, schedule work the heci_bh_handler
         * to handle the interrupt processing. This needs to be a
@@ -251,6 +254,9 @@ end:
                /* acknowledge interrupt and disable interrupts */
                heci_csr_disable_interrupts(dev);
 
+               /* clear H_IS bit in H_CSR */
+               heci_csr_clear_his(dev);
+
                PREPARE_WORK(&dev->work, heci_bh_handler);
                DBG("schedule work the heci_bh_handler.\n");
                rets = schedule_work(&dev->work);