ASoC: fsl_sai: Set SYNC bit of TCR2 to Asynchronous Mode

There is one design rule according to SAI's reference manual:
If the transmitter bit clock and frame sync are to be used by both transmitter
and receiver, the transmitter must be configured for asynchronous operation
and the receiver for synchronous operation.

And SYNC of TCR2 is a 2-width control bit:
00 Asynchronous mode.
01 Synchronous with receiver.
10 Synchronous with another SAI transmitter.
11 Synchronous with another SAI receiver.

So the driver should have set SYNC bit of TCR2 to 0x0, and meanwhile set SYNC
bit of RCR2 to 0x1 (Synchronous with transmitter).

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 7b1eecbc4f60fdce28b7b88f8bd783758d689737..3d865ad466ad4e0a1cfd77b5e205f84dced19b67 100644 (file)
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -333,8 +333,7 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
         * The transmitter bit clock and frame sync are to be
         * used by both the transmitter and receiver.
         */
-       regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC,
-                          ~FSL_SAI_CR2_SYNC);
+       regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC, 0);
        regmap_update_bits(sai->regmap, FSL_SAI_RCR2, FSL_SAI_CR2_SYNC,
                           FSL_SAI_CR2_SYNC);