return NULL;
} while (test_and_set_bit(i & (BITS_PER_LONG - 1),
h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0);
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: using command buffer %d\n", i);
-#endif
c = h->cmd_pool + i;
memset(c, 0, sizeof(CommandList_struct));
cmd_dma_handle = h->cmd_pool_dhandle + i * sizeof(CommandList_struct);
ctlr_info_t *h = get_host(bdev->bd_disk);
drive_info_struct *drv = get_drv(bdev->bd_disk);
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss_open %s\n", bdev->bd_disk->disk_name);
-#endif /* CCISS_DEBUG */
-
+ dev_dbg(&h->pdev->dev, "cciss_open %s\n", bdev->bd_disk->disk_name);
if (drv->busy_configuring)
return -EBUSY;
/*
lock_kernel();
h = get_host(disk);
drv = get_drv(disk);
-
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss_release %s\n", disk->disk_name);
-#endif /* CCISS_DEBUG */
-
+ dev_dbg(&h->pdev->dev, "cciss_release %s\n", disk->disk_name);
drv->usage_count--;
h->usage_count--;
unlock_kernel();
drive_info_struct *drv = get_drv(disk);
void __user *argp = (void __user *)arg;
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss_ioctl: Called with cmd=%x %lx\n", cmd, arg);
-#endif /* CCISS_DEBUG */
-
+ dev_dbg(&h->pdev->dev, "cciss_ioctl: Called with cmd=%x %lx\n",
+ cmd, arg);
switch (cmd) {
case CCISS_GETPCIINFO:
{
(&intinfo, argp, sizeof(cciss_coalint_struct)))
return -EFAULT;
if ((intinfo.delay == 0) && (intinfo.count == 0))
- {
-// printk("cciss_ioctl: delay and count cannot be 0\n");
return -EINVAL;
- }
spin_lock_irqsave(&h->lock, flags);
/* Update the field, and then ring the doorbell */
writel(intinfo.delay,
++sg_index;
}
-#ifdef CCISS_DEBUG
- printk("Done with %p\n", rq);
-#endif /* CCISS_DEBUG */
+ dev_dbg(&h->pdev->dev, "Done with %p\n", rq);
/* set the residual count for pc requests */
if (rq->cmd_type == REQ_TYPE_BLOCK_PC)
* (unless it's the first disk (for the controller node).
*/
if (h->drv[drv_index]->raid_level != -1 && drv_index != 0) {
- printk(KERN_WARNING "disk %d has changed.\n", drv_index);
+ dev_warn(&h->pdev->dev, "disk %d has changed.\n", drv_index);
spin_lock_irqsave(&h->lock, flags);
h->drv[drv_index]->busy_configuring = 1;
spin_unlock_irqrestore(&h->lock, flags);
if (cciss_add_disk(h, disk, drv_index) != 0) {
cciss_free_gendisk(h, drv_index);
cciss_free_drive_info(h, drv_index);
- printk(KERN_WARNING "cciss:%d could not update "
- "disk %d\n", h->ctlr, drv_index);
+ dev_warn(&h->pdev->dev, "could not update disk %d\n",
+ drv_index);
--h->num_luns;
}
}
kfree(drvinfo);
return;
mem_msg:
- printk(KERN_ERR "cciss: out of memory\n");
+ dev_err(&h->pdev->dev, "out of memory\n");
goto freeret;
}
h->gendisk[drv_index] =
alloc_disk(1 << NWD_SHIFT);
if (!h->gendisk[drv_index]) {
- printk(KERN_ERR "cciss%d: could not "
- "allocate a new disk %d\n",
- h->ctlr, drv_index);
+ dev_err(&h->pdev->dev,
+ "could not allocate a new disk %d\n",
+ drv_index);
goto err_free_drive_info;
}
}
cciss_free_gendisk(h, drv_index);
cciss_free_drive_info(h, drv_index);
error:
- printk(KERN_WARNING "cciss%d: could not "
- "add disk 0.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "could not add disk 0.\n");
return;
}
if (return_code == IO_OK)
listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
else { /* reading number of logical volumes failed */
- printk(KERN_WARNING "cciss: report logical volume"
- " command failed\n");
+ dev_warn(&h->pdev->dev,
+ "report logical volume command failed\n");
listlength = 0;
goto freeret;
}
num_luns = listlength / 8; /* 8 bytes per entry */
if (num_luns > CISS_MAX_LUN) {
num_luns = CISS_MAX_LUN;
- printk(KERN_WARNING "cciss: more luns configured"
+ dev_warn(&h->pdev->dev, "more luns configured"
" on controller than can be handled by"
" this driver.\n");
}
*/
return -1;
mem_msg:
- printk(KERN_ERR "cciss: out of memory\n");
+ dev_err(&h->pdev->dev, "out of memory\n");
h->busy_configuring = 0;
goto freeret;
}
c->Request.Timeout = 0;
break;
default:
- printk(KERN_WARNING
- "cciss%d: Unknown Command 0x%c\n",
- h->ctlr, cmd);
+ dev_warn(&h->pdev->dev, "Unknown Command 0x%c\n", cmd);
return IO_ERROR;
}
} else if (cmd_type == TYPE_MSG) {
c->Request.CDB[0] = cmd;
break;
default:
- printk(KERN_WARNING
- "cciss%d: unknown message type %d\n",
- h->ctlr, cmd);
+ dev_warn(&h->pdev->dev,
+ "unknown message type %d\n", cmd);
return IO_ERROR;
}
} else {
- printk(KERN_WARNING
- "cciss%d: unknown command type %d\n", h->ctlr, cmd_type);
+ dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type);
return IO_ERROR;
}
/* Fill in the scatter gather information */
default:
if (check_for_unit_attention(h, c))
return IO_NEEDS_RETRY;
- printk(KERN_WARNING "cciss%d: cmd 0x%02x "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x "
"check condition, sense key = 0x%02x\n",
- h->ctlr, c->Request.CDB[0],
- c->err_info->SenseInfo[2]);
+ c->Request.CDB[0], c->err_info->SenseInfo[2]);
}
break;
default:
- printk(KERN_WARNING "cciss%d: cmd 0x%02x"
- "scsi status = 0x%02x\n", h->ctlr,
+ dev_warn(&h->pdev->dev, "cmd 0x%02x"
+ "scsi status = 0x%02x\n",
c->Request.CDB[0], c->err_info->ScsiStatus);
break;
}
/* expected for inquiry and report lun commands */
break;
case CMD_INVALID:
- printk(KERN_WARNING "cciss: cmd 0x%02x is "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x is "
"reported invalid\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: cmd 0x%02x has "
- "protocol error \n", c->Request.CDB[0]);
+ dev_warn(&h->pdev->dev, "cmd 0x%02x has "
+ "protocol error\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_HARDWARE_ERR:
- printk(KERN_WARNING "cciss: cmd 0x%02x had "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x had "
" hardware error\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_CONNECTION_LOST:
- printk(KERN_WARNING "cciss: cmd 0x%02x had "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x had "
"connection lost\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_ABORTED:
- printk(KERN_WARNING "cciss: cmd 0x%02x was "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x was "
"aborted\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_ABORT_FAILED:
- printk(KERN_WARNING "cciss: cmd 0x%02x reports "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x reports "
"abort failed\n", c->Request.CDB[0]);
return_status = IO_ERROR;
break;
case CMD_UNSOLICITED_ABORT:
- printk(KERN_WARNING
- "cciss%d: unsolicited abort 0x%02x\n", h->ctlr,
+ dev_warn(&h->pdev->dev, "unsolicited abort 0x%02x\n",
c->Request.CDB[0]);
return_status = IO_NEEDS_RETRY;
break;
default:
- printk(KERN_WARNING "cciss: cmd 0x%02x returned "
+ dev_warn(&h->pdev->dev, "cmd 0x%02x returned "
"unknown status %x\n", c->Request.CDB[0],
c->err_info->CommandStatus);
return_status = IO_ERROR;
if (return_status == IO_NEEDS_RETRY &&
c->retry_count < MAX_CMD_RETRIES) {
- printk(KERN_WARNING "cciss%d: retrying 0x%02x\n", h->ctlr,
+ dev_warn(&h->pdev->dev, "retrying 0x%02x\n",
c->Request.CDB[0]);
c->retry_count++;
/* erase the old error information */
sizeof(*inq_buff), 0xC1, scsi3addr, TYPE_CMD);
if (return_code == IO_OK) {
if (inq_buff->data_byte[8] == 0xFF) {
- printk(KERN_WARNING
- "cciss: reading geometry failed, volume "
+ dev_warn(&h->pdev->dev,
+ "reading geometry failed, volume "
"does not support reading geometry\n");
drv->heads = 255;
drv->sectors = 32; /* Sectors per track */
drv->cylinders = real_size;
}
} else { /* Get geometry failed */
- printk(KERN_WARNING "cciss: reading geometry failed\n");
+ dev_warn(&h->pdev->dev, "reading geometry failed\n");
}
}
buf = kzalloc(sizeof(ReadCapdata_struct), GFP_KERNEL);
if (!buf) {
- printk(KERN_WARNING "cciss: out of memory\n");
+ dev_warn(&h->pdev->dev, "out of memory\n");
return;
}
*total_size = be32_to_cpu(*(__be32 *) buf->total_size);
*block_size = be32_to_cpu(*(__be32 *) buf->block_size);
} else { /* read capacity command failed */
- printk(KERN_WARNING "cciss: read capacity failed\n");
+ dev_warn(&h->pdev->dev, "read capacity failed\n");
*total_size = 0;
*block_size = BLOCK_SIZE;
}
buf = kzalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL);
if (!buf) {
- printk(KERN_WARNING "cciss: out of memory\n");
+ dev_warn(&h->pdev->dev, "out of memory\n");
return;
}
*total_size = be64_to_cpu(*(__be64 *) buf->total_size);
*block_size = be32_to_cpu(*(__be32 *) buf->block_size);
} else { /* read capacity command failed */
- printk(KERN_WARNING "cciss: read capacity failed\n");
+ dev_warn(&h->pdev->dev, "read capacity failed\n");
*total_size = 0;
*block_size = BLOCK_SIZE;
}
- printk(KERN_INFO " blocks= %llu block_size= %d\n",
+ dev_info(&h->pdev->dev, " blocks= %llu block_size= %d\n",
(unsigned long long)*total_size+1, *block_size);
kfree(buf);
}
inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
if (inq_buff == NULL) {
- printk(KERN_WARNING "cciss: out of memory\n");
+ dev_warn(&h->pdev->dev, "out of memory\n");
return 1;
}
if (h->cciss_read == CCISS_READ_10) {
c = hlist_entry(h->reqQ.first, CommandList_struct, list);
/* can't do anything if fifo is full */
if ((h->access.fifo_full(h))) {
- printk(KERN_WARNING "cciss: fifo full\n");
+ dev_warn(&h->pdev->dev, "fifo full\n");
break;
}
if (cmd->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) {
if (cmd->rq->cmd_type != REQ_TYPE_BLOCK_PC)
- printk(KERN_WARNING "cciss: cmd %p "
+ dev_warn(&h->pdev->dev, "cmd %p "
"has SCSI Status 0x%x\n",
cmd, cmd->err_info->ScsiStatus);
return error_value;
/* Not SG_IO or similar? */
if (cmd->rq->cmd_type != REQ_TYPE_BLOCK_PC) {
if (error_value != 0)
- printk(KERN_WARNING "cciss: cmd %p has CHECK CONDITION"
+ dev_warn(&h->pdev->dev, "cmd %p has CHECK CONDITION"
" sense key = 0x%x\n", cmd, sense_key);
return error_value;
}
break;
case CMD_DATA_UNDERRUN:
if (cmd->rq->cmd_type == REQ_TYPE_FS) {
- printk(KERN_WARNING "cciss: cmd %p has"
+ dev_warn(&h->pdev->dev, "cmd %p has"
" completed with data underrun "
"reported\n", cmd);
cmd->rq->resid_len = cmd->err_info->ResidualCnt;
break;
case CMD_DATA_OVERRUN:
if (cmd->rq->cmd_type == REQ_TYPE_FS)
- printk(KERN_WARNING "cciss: cmd %p has"
+ dev_warn(&h->pdev->dev, "cciss: cmd %p has"
" completed with data overrun "
"reported\n", cmd);
break;
case CMD_INVALID:
- printk(KERN_WARNING "cciss: cmd %p is "
+ dev_warn(&h->pdev->dev, "cciss: cmd %p is "
"reported invalid\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: cmd %p has "
- "protocol error \n", cmd);
+ dev_warn(&h->pdev->dev, "cciss: cmd %p has "
+ "protocol error\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
(cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_HARDWARE_ERR:
- printk(KERN_WARNING "cciss: cmd %p had "
+ dev_warn(&h->pdev->dev, "cciss: cmd %p had "
" hardware error\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_CONNECTION_LOST:
- printk(KERN_WARNING "cciss: cmd %p had "
+ dev_warn(&h->pdev->dev, "cciss: cmd %p had "
"connection lost\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_ABORTED:
- printk(KERN_WARNING "cciss: cmd %p was "
+ dev_warn(&h->pdev->dev, "cciss: cmd %p was "
"aborted\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
DID_PASSTHROUGH : DID_ABORT);
break;
case CMD_ABORT_FAILED:
- printk(KERN_WARNING "cciss: cmd %p reports "
+ dev_warn(&h->pdev->dev, "cciss: cmd %p reports "
"abort failed\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_UNSOLICITED_ABORT:
- printk(KERN_WARNING "cciss%d: unsolicited "
+ dev_warn(&h->pdev->dev, "cciss%d: unsolicited "
"abort %p\n", h->ctlr, cmd);
if (cmd->retry_count < MAX_CMD_RETRIES) {
retry_cmd = 1;
- printk(KERN_WARNING
- "cciss%d: retrying %p\n", h->ctlr, cmd);
+ dev_warn(&h->pdev->dev, "retrying %p\n", cmd);
cmd->retry_count++;
} else
- printk(KERN_WARNING
- "cciss%d: %p retried too "
- "many times\n", h->ctlr, cmd);
+ dev_warn(&h->pdev->dev,
+ "%p retried too many times\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
(cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
DID_PASSTHROUGH : DID_ABORT);
break;
case CMD_TIMEOUT:
- printk(KERN_WARNING "cciss: cmd %p timedout\n", cmd);
+ dev_warn(&h->pdev->dev, "cmd %p timedout\n", cmd);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
cmd->err_info->CommandStatus, DRIVER_OK,
(cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
DID_PASSTHROUGH : DID_ERROR);
break;
default:
- printk(KERN_WARNING "cciss: cmd %p returned "
+ dev_warn(&h->pdev->dev, "cmd %p returned "
"unknown status %x\n", cmd,
cmd->err_info->CommandStatus);
rq->errors = make_status_bytes(SAM_STAT_GOOD,
c->Request.CDB[0] =
(rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
start_blk = blk_rq_pos(creq);
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n",
+ dev_dbg(&h->pdev->dev, "sector =%d nr_sectors=%d\n",
(int)blk_rq_pos(creq), (int)blk_rq_sectors(creq));
-#endif /* CCISS_DEBUG */
-
sg_init_table(tmp_sg, h->maxsgentries);
seg = blk_rq_map_sg(q, creq, tmp_sg);
if (seg > h->maxSG)
h->maxSG = seg;
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: Submitting %ld sectors in %d segments "
+ dev_dbg(&h->pdev->dev, "Submitting %u sectors in %d segments "
"chained[%d]\n",
blk_rq_sectors(creq), seg, chained);
-#endif /* CCISS_DEBUG */
c->Header.SGTotal = seg + chained;
if (seg <= h->max_cmd_sgentries)
c->Request.CDBLen = creq->cmd_len;
memcpy(c->Request.CDB, creq->cmd, BLK_MAX_CDB);
} else {
- printk(KERN_WARNING "cciss%d: bad request type %d\n", h->ctlr, creq->cmd_type);
+ dev_warn(&h->pdev->dev, "bad request type %d\n",
+ creq->cmd_type);
BUG();
}
switch (c->err_info->SenseInfo[12]) {
case STATE_CHANGED:
- printk(KERN_WARNING "cciss%d: a state change "
- "detected, command retried\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "a state change "
+ "detected, command retried\n");
return 1;
break;
case LUN_FAILED:
- printk(KERN_WARNING "cciss%d: LUN failure "
- "detected, action required\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "LUN failure "
+ "detected, action required\n");
return 1;
break;
case REPORT_LUNS_CHANGED:
- printk(KERN_WARNING "cciss%d: report LUN data "
- "changed\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "report LUN data changed\n");
/*
* Here, we could call add_to_scan_list and wake up the scan thread,
* except that it's quite likely that we will get more than one
return 1;
break;
case POWER_OR_RESET:
- printk(KERN_WARNING "cciss%d: a power on "
- "or device reset detected\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ "a power on or device reset detected\n");
return 1;
break;
case UNIT_ATTENTION_CLEARED:
- printk(KERN_WARNING "cciss%d: unit attention "
- "cleared by another initiator\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ "unit attention cleared by another initiator\n");
return 1;
break;
default:
- printk(KERN_WARNING "cciss%d: unknown "
- "unit attention detected\n", h->ctlr);
- return 1;
+ dev_warn(&h->pdev->dev, "unknown unit attention detected\n");
+ return 1;
}
}
* the io functions.
* This is for debug only.
*/
-static void print_cfg_table(CfgTable_struct *tb)
+static void print_cfg_table(ctlr_info_t *h)
{
-#ifdef CCISS_DEBUG
int i;
char temp_name[17];
+ CfgTable_struct *tb = h->cfgtable;
- printk("Controller Configuration information\n");
- printk("------------------------------------\n");
+ dev_dbg(&h->pdev->dev, "Controller Configuration information\n");
+ dev_dbg(&h->pdev->dev, "------------------------------------\n");
for (i = 0; i < 4; i++)
temp_name[i] = readb(&(tb->Signature[i]));
temp_name[4] = '\0';
- printk(" Signature = %s\n", temp_name);
- printk(" Spec Number = %d\n", readl(&(tb->SpecValence)));
- printk(" Transport methods supported = 0x%x\n",
+ dev_dbg(&h->pdev->dev, " Signature = %s\n", temp_name);
+ dev_dbg(&h->pdev->dev, " Spec Number = %d\n",
+ readl(&(tb->SpecValence)));
+ dev_dbg(&h->pdev->dev, " Transport methods supported = 0x%x\n",
readl(&(tb->TransportSupport)));
- printk(" Transport methods active = 0x%x\n",
+ dev_dbg(&h->pdev->dev, " Transport methods active = 0x%x\n",
readl(&(tb->TransportActive)));
- printk(" Requested transport Method = 0x%x\n",
+ dev_dbg(&h->pdev->dev, " Requested transport Method = 0x%x\n",
readl(&(tb->HostWrite.TransportRequest)));
- printk(" Coalesce Interrupt Delay = 0x%x\n",
+ dev_dbg(&h->pdev->dev, " Coalesce Interrupt Delay = 0x%x\n",
readl(&(tb->HostWrite.CoalIntDelay)));
- printk(" Coalesce Interrupt Count = 0x%x\n",
+ dev_dbg(&h->pdev->dev, " Coalesce Interrupt Count = 0x%x\n",
readl(&(tb->HostWrite.CoalIntCount)));
- printk(" Max outstanding commands = 0x%d\n",
+ dev_dbg(&h->pdev->dev, " Max outstanding commands = 0x%d\n",
readl(&(tb->CmdsOutMax)));
- printk(" Bus Types = 0x%x\n", readl(&(tb->BusTypes)));
+ dev_dbg(&h->pdev->dev, " Bus Types = 0x%x\n",
+ readl(&(tb->BusTypes)));
for (i = 0; i < 16; i++)
temp_name[i] = readb(&(tb->ServerName[i]));
temp_name[16] = '\0';
- printk(" Server Name = %s\n", temp_name);
- printk(" Heartbeat Counter = 0x%x\n\n\n", readl(&(tb->HeartBeat)));
-#endif /* CCISS_DEBUG */
+ dev_dbg(&h->pdev->dev, " Server Name = %s\n", temp_name);
+ dev_dbg(&h->pdev->dev, " Heartbeat Counter = 0x%x\n\n\n",
+ readl(&(tb->HeartBeat)));
}
static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
offset += 8;
break;
default: /* reserved in PCI 2.2 */
- printk(KERN_WARNING
+ dev_warn(&pdev->dev,
"Base address is invalid\n");
return -1;
break;
cciss_wait_for_mode_change_ack(h);
register_value = readl(&(h->cfgtable->TransportActive));
if (!(register_value & CFGTBL_Trans_Performant))
- printk(KERN_WARNING "cciss: unable to get board into"
+ dev_warn(&h->pdev->dev, "cciss: unable to get board into"
" performant mode\n");
}
if (!(trans_support & PERFORMANT_MODE))
return;
- printk(KERN_WARNING "cciss%d: Placing controller into "
- "performant mode\n", h->ctlr);
+ dev_dbg(&h->pdev->dev, "Placing controller into performant mode\n");
/* Performant mode demands commands on a 32 byte boundary
* pci_alloc_consistent aligns on page boundarys already.
* Just need to check if divisible by 32
*/
if ((sizeof(CommandList_struct) % 32) != 0) {
- printk(KERN_WARNING "%s %d %s\n",
+ dev_warn(&h->pdev->dev, "%s %d %s\n",
"cciss info: command size[",
(int)sizeof(CommandList_struct),
"] not divisible by 32, no performant mode..\n");
return;
}
if (err > 0) {
- printk(KERN_WARNING "cciss: only %d MSI-X vectors "
- "available\n", err);
+ dev_warn(&h->pdev->dev,
+ "only %d MSI-X vectors available\n", err);
goto default_int_mode;
} else {
- printk(KERN_WARNING "cciss: MSI-X init failed %d\n",
- err);
+ dev_warn(&h->pdev->dev,
+ "MSI-X init failed %d\n", err);
goto default_int_mode;
}
}
if (!pci_enable_msi(h->pdev))
h->msi_vector = 1;
else
- printk(KERN_WARNING "cciss: MSI init failed\n");
+ dev_warn(&h->pdev->dev, "MSI init failed\n");
}
default_int_mode:
#endif /* CONFIG_PCI_MSI */
h->access = *(products[prod_index].access);
if (cciss_board_disabled(h)) {
- printk(KERN_WARNING
- "cciss: controller appears to be disabled\n");
+ dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
return -ENODEV;
}
err = pci_enable_device(h->pdev);
if (err) {
- printk(KERN_ERR "cciss: Unable to Enable PCI device\n");
+ dev_warn(&h->pdev->dev, "Unable to Enable PCI device\n");
return err;
}
err = pci_request_regions(h->pdev, "cciss");
if (err) {
- printk(KERN_ERR "cciss: Cannot obtain PCI resources, "
- "aborting\n");
+ dev_warn(&h->pdev->dev,
+ "Cannot obtain PCI resources, aborting\n");
return err;
}
-#ifdef CCISS_DEBUG
- printk(KERN_INFO "command = %x\n", command);
- printk(KERN_INFO "irq = %x\n", h->pdev->irq);
- printk(KERN_INFO "board_id = %x\n", h->board_id);
-#endif /* CCISS_DEBUG */
+ dev_dbg(&h->pdev->dev, "irq = %x\n", h->pdev->irq);
+ dev_dbg(&h->pdev->dev, "board_id = %x\n", h->board_id);
/* If the kernel supports MSI/MSI-X we will try to enable that functionality,
* else we use the IO-APIC interrupt assigned to us by system ROM.
err = cciss_find_cfgtables(h);
if (err)
goto err_out_free_res;
- print_cfg_table(h->cfgtable);
+ print_cfg_table(h);
cciss_find_board_params(h);
if (!CISS_signature_present(h)) {
/* Function to find the first free pointer into our hba[] array
* Returns -1 if no free entries are left.
*/
-static int alloc_cciss_hba(void)
+static int alloc_cciss_hba(struct pci_dev *pdev)
{
int i;
return i;
}
}
- printk(KERN_WARNING "cciss: This driver supports a maximum"
+ dev_warn(&pdev->dev, "This driver supports a maximum"
" of %d controllers.\n", MAX_CTLR);
return -1;
Enomem:
- printk(KERN_ERR "cciss: out of memory.\n");
+ dev_warn(&pdev->dev, "out of memory.\n");
return -1;
}
/* we leak the DMA buffer here ... no choice since the controller could
still complete the command. */
if (i == 10) {
- printk(KERN_ERR "cciss: controller message %02x:%02x timed out\n",
+ dev_err(&pdev->dev,
+ "controller message %02x:%02x timed out\n",
opcode, type);
return -ETIMEDOUT;
}
pci_free_consistent(pdev, cmd_sz, cmd, paddr64);
if (tag & 2) {
- printk(KERN_ERR "cciss: controller message %02x:%02x failed\n",
+ dev_err(&pdev->dev, "controller message %02x:%02x failed\n",
opcode, type);
return -EIO;
}
- printk(KERN_INFO "cciss: controller message %02x:%02x succeeded\n",
+ dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n",
opcode, type);
return 0;
}
if (pos) {
pci_read_config_word(pdev, msi_control_reg(pos), &control);
if (control & PCI_MSI_FLAGS_ENABLE) {
- printk(KERN_INFO "cciss: resetting MSI\n");
+ dev_info(&pdev->dev, "resetting MSI\n");
pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE);
}
}
if (pos) {
pci_read_config_word(pdev, msi_control_reg(pos), &control);
if (control & PCI_MSIX_FLAGS_ENABLE) {
- printk(KERN_INFO "cciss: resetting MSI-X\n");
+ dev_info(&pdev->dev, "resetting MSI-X\n");
pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE);
}
}
rc = cciss_init_reset_devices(pdev);
if (rc)
return rc;
- i = alloc_cciss_hba();
+ i = alloc_cciss_hba(pdev);
if (i < 0)
return -1;
else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
dac = 0;
else {
- printk(KERN_ERR "cciss: no suitable DMA available\n");
+ dev_err(&h->pdev->dev, "no suitable DMA available\n");
goto clean1;
}
h->major = COMPAQ_CISS_MAJOR + i;
rc = register_blkdev(h->major, h->devname);
if (rc == -EBUSY || rc == -EINVAL) {
- printk(KERN_ERR
- "cciss: Unable to get major number %d for %s "
+ dev_err(&h->pdev->dev,
+ "Unable to get major number %d for %s "
"on hba %d\n", h->major, h->devname, i);
goto clean1;
} else {
if (request_irq(h->intr[PERF_MODE_INT],
do_cciss_msix_intr,
IRQF_DISABLED, h->devname, h)) {
- printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
+ dev_err(&h->pdev->dev, "Unable to get irq %d for %s\n",
h->intr[PERF_MODE_INT], h->devname);
goto clean2;
}
} else {
if (request_irq(h->intr[PERF_MODE_INT], do_cciss_intx,
IRQF_DISABLED, h->devname, h)) {
- printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
+ dev_err(&h->pdev->dev, "Unable to get irq %d for %s\n",
h->intr[PERF_MODE_INT], h->devname);
goto clean2;
}
}
- printk(KERN_INFO "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
+ dev_info(&h->pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
h->devname, pdev->device, pci_name(pdev),
h->intr[PERF_MODE_INT], dac ? "" : " not");
if ((h->cmd_pool_bits == NULL)
|| (h->cmd_pool == NULL)
|| (h->errinfo_pool == NULL)) {
- printk(KERN_ERR "cciss: out of memory");
+ dev_err(&h->pdev->dev, "out of memory");
goto clean4;
}
h->maxsgentries,
GFP_KERNEL);
if (h->scatter_list[k] == NULL) {
- printk(KERN_ERR "cciss%d: could not allocate "
- "s/g lists\n", i);
+ dev_err(&h->pdev->dev,
+ "could not allocate s/g lists\n");
goto clean4;
}
}
/* Get the firmware version */
inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
if (inq_buff == NULL) {
- printk(KERN_ERR "cciss: out of memory\n");
+ dev_err(&h->pdev->dev, "out of memory\n");
goto clean4;
}
h->firm_ver[2] = inq_buff->data_byte[34];
h->firm_ver[3] = inq_buff->data_byte[35];
} else { /* send command failed */
- printk(KERN_WARNING "cciss: unable to determine firmware"
+ dev_warn(&h->pdev->dev, "unable to determine firmware"
" version of controller\n");
}
kfree(inq_buff);
h = pci_get_drvdata(pdev);
flush_buf = kzalloc(4, GFP_KERNEL);
if (!flush_buf) {
- printk(KERN_WARNING
- "cciss:%d cache not flushed, out of memory.\n",
- h->ctlr);
+ dev_warn(&h->pdev->dev, "cache not flushed, out of memory.\n");
return;
}
/* write all data in the battery backed cache to disk */
4, 0, CTLR_LUNID, TYPE_CMD);
kfree(flush_buf);
if (return_code != IO_OK)
- printk(KERN_WARNING "cciss%d: Error flushing cache\n",
- h->ctlr);
+ dev_warn(&h->pdev->dev, "Error flushing cache\n");
h->access.set_intr_mask(h, CCISS_INTR_OFF);
free_irq(h->intr[PERF_MODE_INT], h);
}
int i, j;
if (pci_get_drvdata(pdev) == NULL) {
- printk(KERN_ERR "cciss: Unable to remove device \n");
+ dev_err(&pdev->dev, "Unable to remove device\n");
return;
}
h = pci_get_drvdata(pdev);
i = h->ctlr;
if (hba[i] == NULL) {
- printk(KERN_ERR "cciss: device appears to "
- "already be removed\n");
+ dev_err(&pdev->dev, "device appears to already be removed\n");
return;
}
/* double check that all controller entrys have been removed */
for (i = 0; i < MAX_CTLR; i++) {
if (hba[i] != NULL) {
- printk(KERN_WARNING "cciss: had to remove"
- " controller %d\n", i);
+ dev_warn(&hba[i]->pdev->dev,
+ "had to remove controller\n");
cciss_remove_one(hba[i]->pdev);
}
}
stk = &sa->cmd_stack;
stk->top++;
if (stk->top >= CMD_STACK_SIZE) {
- printk("cciss: scsi_cmd_free called too many times.\n");
+ dev_err(&h->pdev->dev,
+ "scsi_cmd_free called too many times.\n");
BUG();
}
stk->elem[stk->top] = (struct cciss_scsi_cmd_stack_elem_t *) c;
sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
if (stk->top != CMD_STACK_SIZE-1) {
- printk( "cciss: %d scsi commands are still outstanding.\n",
+ dev_warn(&h->pdev->dev,
+ "bug: %d scsi commands are still outstanding.\n",
CMD_STACK_SIZE - stk->top);
- // BUG();
- printk("WE HAVE A BUG HERE!!! stk=0x%p\n", stk);
}
size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * CMD_STACK_SIZE;
unsigned char addr1[8], addr2[8];
if (n >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
- printk("cciss%d: Too many devices, "
- "some will be inaccessible.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "Too many devices, "
+ "some will be inaccessible.\n");
return -1;
}
know our hostno and we don't want to print anything first
time anyway (the scsi layer's inquiries will show that info) */
if (hostno != -1)
- printk("cciss%d: %s device c%db%dt%dl%d added.\n",
- h->ctlr, scsi_device_type(sd->devtype), hostno,
+ dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n",
+ scsi_device_type(sd->devtype), hostno,
sd->bus, sd->target, sd->lun);
return 0;
}
for (i = entry; i < ccissscsi[h->ctlr].ndevices-1; i++)
ccissscsi[h->ctlr].dev[i] = ccissscsi[h->ctlr].dev[i+1];
ccissscsi[h->ctlr].ndevices--;
- printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
- h->ctlr, scsi_device_type(sd.devtype), hostno,
+ dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n",
+ scsi_device_type(sd.devtype), hostno,
sd.bus, sd.target, sd.lun);
}
GFP_KERNEL);
if (!added || !removed) {
- printk(KERN_WARNING "cciss%d: Out of memory in "
- "adjust_cciss_scsi_table\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ "Out of memory in adjust_cciss_scsi_table\n");
goto free_and_out;
}
if (found == 0) { /* device no longer present. */
changes++;
- /* printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
- h->ctlr, scsi_device_type(csd->devtype), hostno,
- csd->bus, csd->target, csd->lun); */
cciss_scsi_remove_entry(h, hostno, i,
removed, &nremoved);
/* remove ^^^, hence i not incremented */
} else if (found == 1) { /* device is different in some way */
changes++;
- printk("cciss%d: device c%db%dt%dl%d has changed.\n",
- h->ctlr, hostno,
- csd->bus, csd->target, csd->lun);
+ dev_info(&h->pdev->dev,
+ "device c%db%dt%dl%d has changed.\n",
+ hostno, csd->bus, csd->target, csd->lun);
cciss_scsi_remove_entry(h, hostno, i,
removed, &nremoved);
/* remove ^^^, hence i not incremented */
} else if (found == 1) {
/* should never happen... */
changes++;
- printk(KERN_WARNING "cciss%d: device "
- "unexpectedly changed\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ "device unexpectedly changed\n");
/* but if it does happen, we just ignore that device */
}
}
/* We don't expect to get here. */
/* future cmds to this device will get selection */
/* timeout as if the device was gone. */
- printk(KERN_WARNING "cciss%d: didn't find "
+ dev_warn(&h->pdev->dev, "didn't find "
"c%db%dt%dl%d\n for removal.",
- h->ctlr, hostno, removed[i].bus,
+ hostno, removed[i].bus,
removed[i].target, removed[i].lun);
}
}
added[i].target, added[i].lun);
if (rc == 0)
continue;
- printk(KERN_WARNING "cciss%d: scsi_add_device "
+ dev_warn(&h->pdev->dev, "scsi_add_device "
"c%db%dt%dl%d failed, device not added.\n",
- h->ctlr, hostno,
- added[i].bus, added[i].target, added[i].lun);
+ hostno, added[i].bus, added[i].target, added[i].lun);
/* now we have to remove it from ccissscsi, */
/* since it didn't get added to scsi mid layer */
fixup_botched_add(h, added[i].scsi3addr);
case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
break;
case CMD_DATA_OVERRUN:
- printk(KERN_WARNING "cciss: %p has"
+ dev_warn(&h->pdev->dev, "%p has"
" completed with data overrun "
"reported\n", c);
break;
}
break;
case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: %p has "
- "protocol error\n", c);
+ dev_warn(&h->pdev->dev,
+ "%p has protocol error\n", c);
break;
case CMD_HARDWARE_ERR:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: %p had "
- " hardware error\n", c);
+ dev_warn(&h->pdev->dev,
+ "%p had hardware error\n", c);
break;
case CMD_CONNECTION_LOST:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: %p had "
- "connection lost\n", c);
+ dev_warn(&h->pdev->dev,
+ "%p had connection lost\n", c);
break;
case CMD_ABORTED:
cmd->result = DID_ABORT << 16;
- printk(KERN_WARNING "cciss: %p was "
- "aborted\n", c);
+ dev_warn(&h->pdev->dev, "%p was aborted\n", c);
break;
case CMD_ABORT_FAILED:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: %p reports "
- "abort failed\n", c);
+ dev_warn(&h->pdev->dev,
+ "%p reports abort failed\n", c);
break;
case CMD_UNSOLICITED_ABORT:
cmd->result = DID_ABORT << 16;
- printk(KERN_WARNING "cciss: %p aborted "
- "do to an unsolicited abort\n", c);
+ dev_warn(&h->pdev->dev, "%p aborted do to an "
+ "unsolicited abort\n", c);
break;
case CMD_TIMEOUT:
cmd->result = DID_TIME_OUT << 16;
- printk(KERN_WARNING "cciss: %p timedout\n",
- c);
+ dev_warn(&h->pdev->dev, "%p timedout\n", c);
break;
default:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: %p returned "
- "unknown status %x\n", c,
+ dev_warn(&h->pdev->dev,
+ "%p returned unknown status %x\n", c,
ei->CommandStatus);
}
}
}
static void
-cciss_scsi_interpret_error(CommandList_struct *c)
+cciss_scsi_interpret_error(ctlr_info_t *h, CommandList_struct *c)
{
ErrorInfo_struct *ei;
switch(ei->CommandStatus)
{
case CMD_TARGET_STATUS:
- printk(KERN_WARNING "cciss: cmd %p has "
- "completed with errors\n", c);
- printk(KERN_WARNING "cciss: cmd %p "
- "has SCSI Status = %x\n",
- c, ei->ScsiStatus);
+ dev_warn(&h->pdev->dev,
+ "cmd %p has completed with errors\n", c);
+ dev_warn(&h->pdev->dev,
+ "cmd %p has SCSI Status = %x\n",
+ c, ei->ScsiStatus);
if (ei->ScsiStatus == 0)
- printk(KERN_WARNING
- "cciss:SCSI status is abnormally zero. "
+ dev_warn(&h->pdev->dev,
+ "SCSI status is abnormally zero. "
"(probably indicates selection timeout "
"reported incorrectly due to a known "
"firmware bug, circa July, 2001.)\n");
break;
case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
- printk("UNDERRUN\n");
+ dev_info(&h->pdev->dev, "UNDERRUN\n");
break;
case CMD_DATA_OVERRUN:
- printk(KERN_WARNING "cciss: %p has"
+ dev_warn(&h->pdev->dev, "%p has"
" completed with data overrun "
"reported\n", c);
break;
case CMD_INVALID: {
/* controller unfortunately reports SCSI passthru's */
/* to non-existent targets as invalid commands. */
- printk(KERN_WARNING "cciss: %p is "
- "reported invalid (probably means "
+ dev_warn(&h->pdev->dev,
+ "%p is reported invalid (probably means "
"target device no longer present)\n", c);
/* print_bytes((unsigned char *) c, sizeof(*c), 1, 0);
print_cmd(c); */
}
break;
case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: %p has "
- "protocol error\n", c);
+ dev_warn(&h->pdev->dev, "%p has protocol error\n", c);
break;
case CMD_HARDWARE_ERR:
/* cmd->result = DID_ERROR << 16; */
- printk(KERN_WARNING "cciss: %p had "
- " hardware error\n", c);
+ dev_warn(&h->pdev->dev, "%p had hardware error\n", c);
break;
case CMD_CONNECTION_LOST:
- printk(KERN_WARNING "cciss: %p had "
- "connection lost\n", c);
+ dev_warn(&h->pdev->dev, "%p had connection lost\n", c);
break;
case CMD_ABORTED:
- printk(KERN_WARNING "cciss: %p was "
- "aborted\n", c);
+ dev_warn(&h->pdev->dev, "%p was aborted\n", c);
break;
case CMD_ABORT_FAILED:
- printk(KERN_WARNING "cciss: %p reports "
- "abort failed\n", c);
+ dev_warn(&h->pdev->dev,
+ "%p reports abort failed\n", c);
break;
case CMD_UNSOLICITED_ABORT:
- printk(KERN_WARNING "cciss: %p aborted "
- "do to an unsolicited abort\n", c);
+ dev_warn(&h->pdev->dev,
+ "%p aborted do to an unsolicited abort\n", c);
break;
case CMD_TIMEOUT:
- printk(KERN_WARNING "cciss: %p timedout\n", c);
+ dev_warn(&h->pdev->dev, "%p timedout\n", c);
break;
default:
- printk(KERN_WARNING "cciss: %p returned "
- "unknown status %x\n", c, ei->CommandStatus);
+ dev_warn(&h->pdev->dev,
+ "%p returned unknown status %x\n",
+ c, ei->CommandStatus);
}
}
if (ei->CommandStatus != 0 &&
ei->CommandStatus != CMD_DATA_UNDERRUN) {
- cciss_scsi_interpret_error(c);
+ cciss_scsi_interpret_error(h, c);
rc = -1;
}
spin_lock_irqsave(&h->lock, flags);
ei = c->err_info;
if (ei->CommandStatus != 0 &&
ei->CommandStatus != CMD_DATA_UNDERRUN) {
- cciss_scsi_interpret_error(c);
+ cciss_scsi_interpret_error(h, c);
rc = -1;
}
spin_lock_irqsave(&h->lock, flags);
c = scsi_cmd_alloc(h);
spin_unlock_irqrestore(&h->lock, flags);
if (c == NULL) { /* trouble... */
- printk("scsi_cmd_alloc returned NULL!\n");
+ dev_warn(&h->pdev->dev, "scsi_cmd_alloc returned NULL!\n");
/* FIXME: next 3 lines are -> BAD! <- */
cmd->result = DID_NO_CONNECT << 16;
done(cmd);
break;
default:
- printk("cciss: unknown data direction: %d\n",
+ dev_warn(&h->pdev->dev, "unknown data direction: %d\n",
cmd->sc_data_direction);
BUG();
break;
stk = &sa->cmd_stack;
if (sa->registered) {
- printk(KERN_INFO "cciss%d: SCSI subsystem already engaged.\n",
- h->ctlr);
+ dev_info(&h->pdev->dev, "SCSI subsystem already engaged.\n");
spin_unlock_irqrestore(&h->lock, flags);
return -ENXIO;
}
c = cmd_alloc(h);
if (!c) {
- printk(KERN_WARNING "cciss%d: out of memory in "
- "wait_for_device_to_become_ready.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "out of memory in "
+ "wait_for_device_to_become_ready.\n");
return IO_ERROR;
}
}
}
retry_tur:
- printk(KERN_WARNING "cciss%d: Waiting %d secs "
+ dev_warn(&h->pdev->dev, "Waiting %d secs "
"for device to become ready.\n",
- h->ctlr, waittime / HZ);
+ waittime / HZ);
rc = 1; /* device not ready. */
}
if (rc)
- printk("cciss%d: giving up on device.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "giving up on device.\n");
else
- printk(KERN_WARNING "cciss%d: device is ready.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "device is ready.\n");
cmd_free(h, c);
return rc;
h = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
if (h == NULL) /* paranoia */
return FAILED;
- printk(KERN_WARNING
- "cciss%d: resetting tape drive or medium changer.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "resetting tape drive or medium changer.\n");
/* find the command that's giving us trouble */
cmd_in_trouble = (CommandList_struct *) scsicmd->host_scribble;
if (cmd_in_trouble == NULL) /* paranoia */
TYPE_MSG);
if (rc == 0 && wait_for_device_to_become_ready(h, lunaddr) == 0)
return SUCCESS;
- printk(KERN_WARNING "cciss%d: resetting device failed.\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "resetting device failed.\n");
return FAILED;
}
h = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
if (h == NULL) /* paranoia */
return FAILED;
- printk(KERN_WARNING "cciss%d: aborting tardy SCSI cmd\n", h->ctlr);
+ dev_warn(&h->pdev->dev, "aborting tardy SCSI cmd\n");
/* find the command to be aborted */
cmd_to_abort = (CommandList_struct *) scsicmd->host_scribble;
projects / firefly-linux-kernel-4.4.55.git / commitdiff