ASoC: Add a DB1x00 AC97 machine driver
authorManuel Lauss <manuel.lauss@googlemail.com>
Mon, 25 Jul 2011 11:44:46 +0000 (13:44 +0200)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Wed, 27 Jul 2011 18:10:48 +0000 (19:10 +0100)
Add a machine driver suitable for the AC97 part on the DB1000/DB1500/DB1100
boards.

Run-tested on DB1500.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
arch/mips/alchemy/devboards/db1x00/platform.c
sound/soc/au1x/Kconfig
sound/soc/au1x/Makefile
sound/soc/au1x/db1000.c [new file with mode: 0644]

index 978d5ab3d6781781eb5cb2d5acb117b3c443a81c..7057d28f73016dffb4136fb7d5856c1e19f66dac 100644 (file)
  */
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
 
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1000_dma.h>
 #include <asm/mach-au1x00/au1xxx.h>
 #include <asm/mach-db1x00/bcsr.h>
 #include "../platform.h"
 #endif
 #endif
 
+static struct resource alchemy_ac97c_res[] = {
+       [0] = {
+               .start  = AU1000_AC97_PHYS_ADDR,
+               .end    = AU1000_AC97_PHYS_ADDR + 0xfff,
+               .flags  = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = DMA_ID_AC97C_TX,
+               .end    = DMA_ID_AC97C_TX,
+               .flags  = IORESOURCE_DMA,
+       },
+       [2] = {
+               .start  = DMA_ID_AC97C_RX,
+               .end    = DMA_ID_AC97C_RX,
+               .flags  = IORESOURCE_DMA,
+       },
+};
+
+static struct platform_device alchemy_ac97c_dev = {
+       .name           = "alchemy-ac97c",
+       .id             = -1,
+       .resource       = alchemy_ac97c_res,
+       .num_resources  = ARRAY_SIZE(alchemy_ac97c_res),
+};
+
+static struct platform_device alchemy_ac97c_dma_dev = {
+       .name           = "alchemy-pcm-dma",
+       .id             = 0,
+};
+
+static struct platform_device db1x00_codec_dev = {
+       .name           = "ac97-codec",
+       .id             = -1,
+};
+
+static struct platform_device db1x00_audio_dev = {
+       .name           = "db1000-audio",
+};
+
 static int __init db1xxx_dev_init(void)
 {
 #ifdef DB1XXX_HAS_PCMCIA
@@ -113,6 +155,12 @@ static int __init db1xxx_dev_init(void)
                                    1);
 #endif
        db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED);
+
+       platform_device_register(&db1x00_codec_dev);
+       platform_device_register(&alchemy_ac97c_dma_dev);
+       platform_device_register(&alchemy_ac97c_dev);
+       platform_device_register(&db1x00_audio_dev);
+
        return 0;
 }
 device_initcall(db1xxx_dev_init);
index 0460b428862cd539465318c2ded6f2f454ccae2d..6d592546e8fcc2bd2a0ea343baf929f0a930762f 100644 (file)
@@ -41,6 +41,15 @@ config SND_SOC_AU1XI2SC
 ##
 ## Boards
 ##
+config SND_SOC_DB1000
+       tristate "DB1000 Audio support"
+       depends on SND_SOC_AU1XAUDIO
+       select SND_SOC_AU1XAC97C
+       select SND_SOC_AC97_CODEC
+       help
+         Select this option to enable AC97 audio on the early DB1x00 series
+         of boards (DB1000/DB1500/DB1100).
+
 config SND_SOC_DB1200
        tristate "DB1200 AC97+I2S audio support"
        depends on SND_SOC_AU1XPSC
index ff5531eee61303d39163fe73d47f59561ffc9670..920710514ea07baaaa734fb55fefe1a96ca92215 100644 (file)
@@ -16,6 +16,8 @@ obj-$(CONFIG_SND_SOC_AU1XAC97C) += snd-soc-au1x-ac97c.o
 obj-$(CONFIG_SND_SOC_AU1XI2SC) += snd-soc-au1x-i2sc.o
 
 # Boards
+snd-soc-db1000-objs := db1000.o
 snd-soc-db1200-objs := db1200.o
 
+obj-$(CONFIG_SND_SOC_DB1000) += snd-soc-db1000.o
 obj-$(CONFIG_SND_SOC_DB1200) += snd-soc-db1200.o
diff --git a/sound/soc/au1x/db1000.c b/sound/soc/au1x/db1000.c
new file mode 100644 (file)
index 0000000..127477a
--- /dev/null
@@ -0,0 +1,75 @@
+/*
+ * DB1000/DB1500/DB1100 ASoC audio fabric support code.
+ *
+ * (c) 2011 Manuel Lauss <manuel.lauss@googlemail.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "psc.h"
+
+static struct snd_soc_dai_link db1000_ac97_dai = {
+       .name           = "AC97",
+       .stream_name    = "AC97 HiFi",
+       .codec_dai_name = "ac97-hifi",
+       .cpu_dai_name   = "alchemy-ac97c",
+       .platform_name  = "alchemy-pcm-dma.0",
+       .codec_name     = "ac97-codec",
+};
+
+static struct snd_soc_card db1000_ac97 = {
+       .name           = "DB1000_AC97",
+       .dai_link       = &db1000_ac97_dai,
+       .num_links      = 1,
+};
+
+static int __devinit db1000_audio_probe(struct platform_device *pdev)
+{
+       struct snd_soc_card *card = &db1000_ac97;
+       card->dev = &pdev->dev;
+       return snd_soc_register_card(card);
+}
+
+static int __devexit db1000_audio_remove(struct platform_device *pdev)
+{
+       struct snd_soc_card *card = platform_get_drvdata(pdev);
+       snd_soc_unregister_card(card);
+       return 0;
+}
+
+static struct platform_driver db1000_audio_driver = {
+       .driver = {
+               .name   = "db1000-audio",
+               .owner  = THIS_MODULE,
+               .pm     = &snd_soc_pm_ops,
+       },
+       .probe          = db1000_audio_probe,
+       .remove         = __devexit_p(db1000_audio_remove),
+};
+
+static int __init db1000_audio_load(void)
+{
+       return platform_driver_register(&db1000_audio_driver);
+}
+
+static void __exit db1000_audio_unload(void)
+{
+       platform_driver_unregister(&db1000_audio_driver);
+}
+
+module_init(db1000_audio_load);
+module_exit(db1000_audio_unload);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DB1000/DB1500/DB1100 ASoC audio");
+MODULE_AUTHOR("Manuel Lauss");