obj-$(CONFIG_PCMCIA_NETWAVE) += netwave_cs.o
obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan_cs.o
-obj-$(CONFIG_HERMES) += orinoco.o hermes.o hermes_dld.o
-obj-$(CONFIG_PCMCIA_HERMES) += orinoco_cs.o
-obj-$(CONFIG_APPLE_AIRPORT) += airport.o
-obj-$(CONFIG_PLX_HERMES) += orinoco_plx.o
-obj-$(CONFIG_PCI_HERMES) += orinoco_pci.o
-obj-$(CONFIG_TMD_HERMES) += orinoco_tmd.o
-obj-$(CONFIG_NORTEL_HERMES) += orinoco_nortel.o
-obj-$(CONFIG_PCMCIA_SPECTRUM) += spectrum_cs.o
+obj-$(CONFIG_HERMES) += orinoco/
obj-$(CONFIG_AIRO) += airo.o
obj-$(CONFIG_AIRO_CS) += airo_cs.o airo.o
+++ /dev/null
-/* airport.c
- *
- * A driver for "Hermes" chipset based Apple Airport wireless
- * card.
- *
- * Copyright notice & release notes in file orinoco.c
- *
- * Note specific to airport stub:
- *
- * 0.05 : first version of the new split driver
- * 0.06 : fix possible hang on powerup, add sleep support
- */
-
-#define DRIVER_NAME "airport"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <asm/pmac_feature.h>
-
-#include "orinoco.h"
-
-#define AIRPORT_IO_LEN (0x1000) /* one page */
-
-struct airport {
- struct macio_dev *mdev;
- void __iomem *vaddr;
- int irq_requested;
- int ndev_registered;
-};
-
-static int
-airport_suspend(struct macio_dev *mdev, pm_message_t state)
-{
- struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev);
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
- int err;
-
- printk(KERN_DEBUG "%s: Airport entering sleep mode\n", dev->name);
-
- err = orinoco_lock(priv, &flags);
- if (err) {
- printk(KERN_ERR "%s: hw_unavailable on PBOOK_SLEEP_NOW\n",
- dev->name);
- return 0;
- }
-
- err = __orinoco_down(dev);
- if (err)
- printk(KERN_WARNING "%s: PBOOK_SLEEP_NOW: Error %d downing interface\n",
- dev->name, err);
-
- netif_device_detach(dev);
-
- priv->hw_unavailable++;
-
- orinoco_unlock(priv, &flags);
-
- disable_irq(dev->irq);
- pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0);
-
- return 0;
-}
-
-static int
-airport_resume(struct macio_dev *mdev)
-{
- struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev);
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
- int err;
-
- printk(KERN_DEBUG "%s: Airport waking up\n", dev->name);
-
- pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1);
- msleep(200);
-
- enable_irq(dev->irq);
-
- err = orinoco_reinit_firmware(dev);
- if (err) {
- printk(KERN_ERR "%s: Error %d re-initializing firmware on PBOOK_WAKE\n",
- dev->name, err);
- return 0;
- }
-
- spin_lock_irqsave(&priv->lock, flags);
-
- netif_device_attach(dev);
-
- priv->hw_unavailable--;
-
- if (priv->open && (! priv->hw_unavailable)) {
- err = __orinoco_up(dev);
- if (err)
- printk(KERN_ERR "%s: Error %d restarting card on PBOOK_WAKE\n",
- dev->name, err);
- }
-
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- return 0;
-}
-
-static int
-airport_detach(struct macio_dev *mdev)
-{
- struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev);
- struct orinoco_private *priv = netdev_priv(dev);
- struct airport *card = priv->card;
-
- if (card->ndev_registered)
- unregister_netdev(dev);
- card->ndev_registered = 0;
-
- if (card->irq_requested)
- free_irq(dev->irq, dev);
- card->irq_requested = 0;
-
- if (card->vaddr)
- iounmap(card->vaddr);
- card->vaddr = NULL;
-
- macio_release_resource(mdev, 0);
-
- pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0);
- ssleep(1);
-
- macio_set_drvdata(mdev, NULL);
- free_orinocodev(dev);
-
- return 0;
-}
-
-static int airport_hard_reset(struct orinoco_private *priv)
-{
- /* It would be nice to power cycle the Airport for a real hard
- * reset, but for some reason although it appears to
- * re-initialize properly, it falls in a screaming heap
- * shortly afterwards. */
-#if 0
- struct net_device *dev = priv->ndev;
- struct airport *card = priv->card;
-
- /* Vitally important. If we don't do this it seems we get an
- * interrupt somewhere during the power cycle, since
- * hw_unavailable is already set it doesn't get ACKed, we get
- * into an interrupt loop and the PMU decides to turn us
- * off. */
- disable_irq(dev->irq);
-
- pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 0);
- ssleep(1);
- pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 1);
- ssleep(1);
-
- enable_irq(dev->irq);
- ssleep(1);
-#endif
-
- return 0;
-}
-
-static int
-airport_attach(struct macio_dev *mdev, const struct of_device_id *match)
-{
- struct orinoco_private *priv;
- struct net_device *dev;
- struct airport *card;
- unsigned long phys_addr;
- hermes_t *hw;
-
- if (macio_resource_count(mdev) < 1 || macio_irq_count(mdev) < 1) {
- printk(KERN_ERR PFX "Wrong interrupt/addresses in OF tree\n");
- return -ENODEV;
- }
-
- /* Allocate space for private device-specific data */
- dev = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev,
- airport_hard_reset, NULL);
- if (! dev) {
- printk(KERN_ERR PFX "Cannot allocate network device\n");
- return -ENODEV;
- }
- priv = netdev_priv(dev);
- card = priv->card;
-
- hw = &priv->hw;
- card->mdev = mdev;
-
- if (macio_request_resource(mdev, 0, "airport")) {
- printk(KERN_ERR PFX "can't request IO resource !\n");
- free_orinocodev(dev);
- return -EBUSY;
- }
-
- SET_NETDEV_DEV(dev, &mdev->ofdev.dev);
-
- macio_set_drvdata(mdev, dev);
-
- /* Setup interrupts & base address */
- dev->irq = macio_irq(mdev, 0);
- phys_addr = macio_resource_start(mdev, 0); /* Physical address */
- printk(KERN_DEBUG PFX "Physical address %lx\n", phys_addr);
- dev->base_addr = phys_addr;
- card->vaddr = ioremap(phys_addr, AIRPORT_IO_LEN);
- if (!card->vaddr) {
- printk(KERN_ERR PFX "ioremap() failed\n");
- goto failed;
- }
-
- hermes_struct_init(hw, card->vaddr, HERMES_16BIT_REGSPACING);
-
- /* Power up card */
- pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1);
- ssleep(1);
-
- /* Reset it before we get the interrupt */
- hermes_init(hw);
-
- if (request_irq(dev->irq, orinoco_interrupt, 0, dev->name, dev)) {
- printk(KERN_ERR PFX "Couldn't get IRQ %d\n", dev->irq);
- goto failed;
- }
- card->irq_requested = 1;
-
- /* Tell the stack we exist */
- if (register_netdev(dev) != 0) {
- printk(KERN_ERR PFX "register_netdev() failed\n");
- goto failed;
- }
- printk(KERN_DEBUG PFX "Card registered for interface %s\n", dev->name);
- card->ndev_registered = 1;
- return 0;
- failed:
- airport_detach(mdev);
- return -ENODEV;
-} /* airport_attach */
-
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
- " (Benjamin Herrenschmidt <benh@kernel.crashing.org>)";
-MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("Driver for the Apple Airport wireless card.");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static struct of_device_id airport_match[] =
-{
- {
- .name = "radio",
- },
- {},
-};
-
-MODULE_DEVICE_TABLE (of, airport_match);
-
-static struct macio_driver airport_driver =
-{
- .name = DRIVER_NAME,
- .match_table = airport_match,
- .probe = airport_attach,
- .remove = airport_detach,
- .suspend = airport_suspend,
- .resume = airport_resume,
-};
-
-static int __init
-init_airport(void)
-{
- printk(KERN_DEBUG "%s\n", version);
-
- return macio_register_driver(&airport_driver);
-}
-
-static void __exit
-exit_airport(void)
-{
- return macio_unregister_driver(&airport_driver);
-}
-
-module_init(init_airport);
-module_exit(exit_airport);
+++ /dev/null
-/* hermes.c
- *
- * Driver core for the "Hermes" wireless MAC controller, as used in
- * the Lucent Orinoco and Cabletron RoamAbout cards. It should also
- * work on the hfa3841 and hfa3842 MAC controller chips used in the
- * Prism II chipsets.
- *
- * This is not a complete driver, just low-level access routines for
- * the MAC controller itself.
- *
- * Based on the prism2 driver from Absolute Value Systems' linux-wlan
- * project, the Linux wvlan_cs driver, Lucent's HCF-Light
- * (wvlan_hcf.c) library, and the NetBSD wireless driver (in no
- * particular order).
- *
- * Copyright (C) 2000, David Gibson, Linuxcare Australia.
- * (C) Copyright David Gibson, IBM Corp. 2001-2003.
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include "hermes.h"
-
-MODULE_DESCRIPTION("Low-level driver helper for Lucent Hermes chipset and Prism II HFA384x wireless MAC controller");
-MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>"
- " & David Gibson <hermes@gibson.dropbear.id.au>");
-MODULE_LICENSE("Dual MPL/GPL");
-
-/* These are maximum timeouts. Most often, card wil react much faster */
-#define CMD_BUSY_TIMEOUT (100) /* In iterations of ~1us */
-#define CMD_INIT_TIMEOUT (50000) /* in iterations of ~10us */
-#define CMD_COMPL_TIMEOUT (20000) /* in iterations of ~10us */
-#define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */
-
-/*
- * Debugging helpers
- */
-
-#define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \
- printk(stuff);} while (0)
-
-#undef HERMES_DEBUG
-#ifdef HERMES_DEBUG
-#include <stdarg.h>
-
-#define DEBUG(lvl, stuff...) if ( (lvl) <= HERMES_DEBUG) DMSG(stuff)
-
-#else /* ! HERMES_DEBUG */
-
-#define DEBUG(lvl, stuff...) do { } while (0)
-
-#endif /* ! HERMES_DEBUG */
-
-
-/*
- * Internal functions
- */
-
-/* Issue a command to the chip. Waiting for it to complete is the caller's
- problem.
-
- Returns -EBUSY if the command register is busy, 0 on success.
-
- Callable from any context.
-*/
-static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0,
- u16 param1, u16 param2)
-{
- int k = CMD_BUSY_TIMEOUT;
- u16 reg;
-
- /* First wait for the command register to unbusy */
- reg = hermes_read_regn(hw, CMD);
- while ( (reg & HERMES_CMD_BUSY) && k ) {
- k--;
- udelay(1);
- reg = hermes_read_regn(hw, CMD);
- }
- if (reg & HERMES_CMD_BUSY) {
- return -EBUSY;
- }
-
- hermes_write_regn(hw, PARAM2, param2);
- hermes_write_regn(hw, PARAM1, param1);
- hermes_write_regn(hw, PARAM0, param0);
- hermes_write_regn(hw, CMD, cmd);
-
- return 0;
-}
-
-/*
- * Function definitions
- */
-
-/* For doing cmds that wipe the magic constant in SWSUPPORT0 */
-int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
- u16 parm0, u16 parm1, u16 parm2,
- struct hermes_response *resp)
-{
- int err = 0;
- int k;
- u16 status, reg;
-
- err = hermes_issue_cmd(hw, cmd, parm0, parm1, parm2);
- if (err)
- return err;
-
- reg = hermes_read_regn(hw, EVSTAT);
- k = CMD_INIT_TIMEOUT;
- while ((!(reg & HERMES_EV_CMD)) && k) {
- k--;
- udelay(10);
- reg = hermes_read_regn(hw, EVSTAT);
- }
-
- hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC);
-
- if (!hermes_present(hw)) {
- DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n",
- hw->iobase);
- err = -ENODEV;
- goto out;
- }
-
- if (!(reg & HERMES_EV_CMD)) {
- printk(KERN_ERR "hermes @ %p: "
- "Timeout waiting for card to reset (reg=0x%04x)!\n",
- hw->iobase, reg);
- err = -ETIMEDOUT;
- goto out;
- }
-
- status = hermes_read_regn(hw, STATUS);
- if (resp) {
- resp->status = status;
- resp->resp0 = hermes_read_regn(hw, RESP0);
- resp->resp1 = hermes_read_regn(hw, RESP1);
- resp->resp2 = hermes_read_regn(hw, RESP2);
- }
-
- hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
-
- if (status & HERMES_STATUS_RESULT)
- err = -EIO;
-out:
- return err;
-}
-EXPORT_SYMBOL(hermes_doicmd_wait);
-
-void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing)
-{
- hw->iobase = address;
- hw->reg_spacing = reg_spacing;
- hw->inten = 0x0;
-}
-EXPORT_SYMBOL(hermes_struct_init);
-
-int hermes_init(hermes_t *hw)
-{
- u16 reg;
- int err = 0;
- int k;
-
- /* We don't want to be interrupted while resetting the chipset */
- hw->inten = 0x0;
- hermes_write_regn(hw, INTEN, 0);
- hermes_write_regn(hw, EVACK, 0xffff);
-
- /* Normally it's a "can't happen" for the command register to
- be busy when we go to issue a command because we are
- serializing all commands. However we want to have some
- chance of resetting the card even if it gets into a stupid
- state, so we actually wait to see if the command register
- will unbusy itself here. */
- k = CMD_BUSY_TIMEOUT;
- reg = hermes_read_regn(hw, CMD);
- while (k && (reg & HERMES_CMD_BUSY)) {
- if (reg == 0xffff) /* Special case - the card has probably been removed,
- so don't wait for the timeout */
- return -ENODEV;
-
- k--;
- udelay(1);
- reg = hermes_read_regn(hw, CMD);
- }
-
- /* No need to explicitly handle the timeout - if we've timed
- out hermes_issue_cmd() will probably return -EBUSY below */
-
- /* According to the documentation, EVSTAT may contain
- obsolete event occurrence information. We have to acknowledge
- it by writing EVACK. */
- reg = hermes_read_regn(hw, EVSTAT);
- hermes_write_regn(hw, EVACK, reg);
-
- /* We don't use hermes_docmd_wait here, because the reset wipes
- the magic constant in SWSUPPORT0 away, and it gets confused */
- err = hermes_doicmd_wait(hw, HERMES_CMD_INIT, 0, 0, 0, NULL);
-
- return err;
-}
-EXPORT_SYMBOL(hermes_init);
-
-/* Issue a command to the chip, and (busy!) wait for it to
- * complete.
- *
- * Returns: < 0 on internal error, 0 on success, > 0 on error returned by the firmware
- *
- * Callable from any context, but locking is your problem. */
-int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
- struct hermes_response *resp)
-{
- int err;
- int k;
- u16 reg;
- u16 status;
-
- err = hermes_issue_cmd(hw, cmd, parm0, 0, 0);
- if (err) {
- if (! hermes_present(hw)) {
- if (net_ratelimit())
- printk(KERN_WARNING "hermes @ %p: "
- "Card removed while issuing command "
- "0x%04x.\n", hw->iobase, cmd);
- err = -ENODEV;
- } else
- if (net_ratelimit())
- printk(KERN_ERR "hermes @ %p: "
- "Error %d issuing command 0x%04x.\n",
- hw->iobase, err, cmd);
- goto out;
- }
-
- reg = hermes_read_regn(hw, EVSTAT);
- k = CMD_COMPL_TIMEOUT;
- while ( (! (reg & HERMES_EV_CMD)) && k) {
- k--;
- udelay(10);
- reg = hermes_read_regn(hw, EVSTAT);
- }
-
- if (! hermes_present(hw)) {
- printk(KERN_WARNING "hermes @ %p: Card removed "
- "while waiting for command 0x%04x completion.\n",
- hw->iobase, cmd);
- err = -ENODEV;
- goto out;
- }
-
- if (! (reg & HERMES_EV_CMD)) {
- printk(KERN_ERR "hermes @ %p: Timeout waiting for "
- "command 0x%04x completion.\n", hw->iobase, cmd);
- err = -ETIMEDOUT;
- goto out;
- }
-
- status = hermes_read_regn(hw, STATUS);
- if (resp) {
- resp->status = status;
- resp->resp0 = hermes_read_regn(hw, RESP0);
- resp->resp1 = hermes_read_regn(hw, RESP1);
- resp->resp2 = hermes_read_regn(hw, RESP2);
- }
-
- hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
-
- if (status & HERMES_STATUS_RESULT)
- err = -EIO;
-
- out:
- return err;
-}
-EXPORT_SYMBOL(hermes_docmd_wait);
-
-int hermes_allocate(hermes_t *hw, u16 size, u16 *fid)
-{
- int err = 0;
- int k;
- u16 reg;
-
- if ( (size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX) )
- return -EINVAL;
-
- err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL);
- if (err) {
- return err;
- }
-
- reg = hermes_read_regn(hw, EVSTAT);
- k = ALLOC_COMPL_TIMEOUT;
- while ( (! (reg & HERMES_EV_ALLOC)) && k) {
- k--;
- udelay(10);
- reg = hermes_read_regn(hw, EVSTAT);
- }
-
- if (! hermes_present(hw)) {
- printk(KERN_WARNING "hermes @ %p: "
- "Card removed waiting for frame allocation.\n",
- hw->iobase);
- return -ENODEV;
- }
-
- if (! (reg & HERMES_EV_ALLOC)) {
- printk(KERN_ERR "hermes @ %p: "
- "Timeout waiting for frame allocation\n",
- hw->iobase);
- return -ETIMEDOUT;
- }
-
- *fid = hermes_read_regn(hw, ALLOCFID);
- hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC);
-
- return 0;
-}
-EXPORT_SYMBOL(hermes_allocate);
-
-/* Set up a BAP to read a particular chunk of data from card's internal buffer.
- *
- * Returns: < 0 on internal failure (errno), 0 on success, >0 on error
- * from firmware
- *
- * Callable from any context */
-static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
-{
- int sreg = bap ? HERMES_SELECT1 : HERMES_SELECT0;
- int oreg = bap ? HERMES_OFFSET1 : HERMES_OFFSET0;
- int k;
- u16 reg;
-
- /* Paranoia.. */
- if ( (offset > HERMES_BAP_OFFSET_MAX) || (offset % 2) )
- return -EINVAL;
-
- k = HERMES_BAP_BUSY_TIMEOUT;
- reg = hermes_read_reg(hw, oreg);
- while ((reg & HERMES_OFFSET_BUSY) && k) {
- k--;
- udelay(1);
- reg = hermes_read_reg(hw, oreg);
- }
-
- if (reg & HERMES_OFFSET_BUSY)
- return -ETIMEDOUT;
-
- /* Now we actually set up the transfer */
- hermes_write_reg(hw, sreg, id);
- hermes_write_reg(hw, oreg, offset);
-
- /* Wait for the BAP to be ready */
- k = HERMES_BAP_BUSY_TIMEOUT;
- reg = hermes_read_reg(hw, oreg);
- while ( (reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) {
- k--;
- udelay(1);
- reg = hermes_read_reg(hw, oreg);
- }
-
- if (reg != offset) {
- printk(KERN_ERR "hermes @ %p: BAP%d offset %s: "
- "reg=0x%x id=0x%x offset=0x%x\n", hw->iobase, bap,
- (reg & HERMES_OFFSET_BUSY) ? "timeout" : "error",
- reg, id, offset);
-
- if (reg & HERMES_OFFSET_BUSY) {
- return -ETIMEDOUT;
- }
-
- return -EIO; /* error or wrong offset */
- }
-
- return 0;
-}
-
-/* Read a block of data from the chip's buffer, via the
- * BAP. Synchronization/serialization is the caller's problem. len
- * must be even.
- *
- * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
- */
-int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
- u16 id, u16 offset)
-{
- int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
- int err = 0;
-
- if ( (len < 0) || (len % 2) )
- return -EINVAL;
-
- err = hermes_bap_seek(hw, bap, id, offset);
- if (err)
- goto out;
-
- /* Actually do the transfer */
- hermes_read_words(hw, dreg, buf, len/2);
-
- out:
- return err;
-}
-EXPORT_SYMBOL(hermes_bap_pread);
-
-/* Write a block of data to the chip's buffer, via the
- * BAP. Synchronization/serialization is the caller's problem.
- *
- * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
- */
-int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
- u16 id, u16 offset)
-{
- int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
- int err = 0;
-
- if (len < 0)
- return -EINVAL;
-
- err = hermes_bap_seek(hw, bap, id, offset);
- if (err)
- goto out;
-
- /* Actually do the transfer */
- hermes_write_bytes(hw, dreg, buf, len);
-
- out:
- return err;
-}
-EXPORT_SYMBOL(hermes_bap_pwrite);
-
-/* Read a Length-Type-Value record from the card.
- *
- * If length is NULL, we ignore the length read from the card, and
- * read the entire buffer regardless. This is useful because some of
- * the configuration records appear to have incorrect lengths in
- * practice.
- *
- * Callable from user or bh context. */
-int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize,
- u16 *length, void *buf)
-{
- int err = 0;
- int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
- u16 rlength, rtype;
- unsigned nwords;
-
- if ( (bufsize < 0) || (bufsize % 2) )
- return -EINVAL;
-
- err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL);
- if (err)
- return err;
-
- err = hermes_bap_seek(hw, bap, rid, 0);
- if (err)
- return err;
-
- rlength = hermes_read_reg(hw, dreg);
-
- if (! rlength)
- return -ENODATA;
-
- rtype = hermes_read_reg(hw, dreg);
-
- if (length)
- *length = rlength;
-
- if (rtype != rid)
- printk(KERN_WARNING "hermes @ %p: %s(): "
- "rid (0x%04x) does not match type (0x%04x)\n",
- hw->iobase, __func__, rid, rtype);
- if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize)
- printk(KERN_WARNING "hermes @ %p: "
- "Truncating LTV record from %d to %d bytes. "
- "(rid=0x%04x, len=0x%04x)\n", hw->iobase,
- HERMES_RECLEN_TO_BYTES(rlength), bufsize, rid, rlength);
-
- nwords = min((unsigned)rlength - 1, bufsize / 2);
- hermes_read_words(hw, dreg, buf, nwords);
-
- return 0;
-}
-EXPORT_SYMBOL(hermes_read_ltv);
-
-int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
- u16 length, const void *value)
-{
- int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
- int err = 0;
- unsigned count;
-
- if (length == 0)
- return -EINVAL;
-
- err = hermes_bap_seek(hw, bap, rid, 0);
- if (err)
- return err;
-
- hermes_write_reg(hw, dreg, length);
- hermes_write_reg(hw, dreg, rid);
-
- count = length - 1;
-
- hermes_write_bytes(hw, dreg, value, count << 1);
-
- err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE,
- rid, NULL);
-
- return err;
-}
-EXPORT_SYMBOL(hermes_write_ltv);
-
-static int __init init_hermes(void)
-{
- return 0;
-}
-
-static void __exit exit_hermes(void)
-{
-}
-
-module_init(init_hermes);
-module_exit(exit_hermes);
+++ /dev/null
-/* hermes.h
- *
- * Driver core for the "Hermes" wireless MAC controller, as used in
- * the Lucent Orinoco and Cabletron RoamAbout cards. It should also
- * work on the hfa3841 and hfa3842 MAC controller chips used in the
- * Prism I & II chipsets.
- *
- * This is not a complete driver, just low-level access routines for
- * the MAC controller itself.
- *
- * Based on the prism2 driver from Absolute Value Systems' linux-wlan
- * project, the Linux wvlan_cs driver, Lucent's HCF-Light
- * (wvlan_hcf.c) library, and the NetBSD wireless driver.
- *
- * Copyright (C) 2000, David Gibson, Linuxcare Australia.
- * (C) Copyright David Gibson, IBM Corp. 2001-2003.
- *
- * Portions taken from hfa384x.h, Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
- *
- * This file distributed under the GPL, version 2.
- */
-
-#ifndef _HERMES_H
-#define _HERMES_H
-
-/* Notes on locking:
- *
- * As a module of low level hardware access routines, there is no
- * locking. Users of this module should ensure that they serialize
- * access to the hermes_t structure, and to the hardware
-*/
-
-#include <linux/if_ether.h>
-#include <asm/io.h>
-
-/*
- * Limits and constants
- */
-#define HERMES_ALLOC_LEN_MIN (4)
-#define HERMES_ALLOC_LEN_MAX (2400)
-#define HERMES_LTV_LEN_MAX (34)
-#define HERMES_BAP_DATALEN_MAX (4096)
-#define HERMES_BAP_OFFSET_MAX (4096)
-#define HERMES_PORTID_MAX (7)
-#define HERMES_NUMPORTS_MAX (HERMES_PORTID_MAX+1)
-#define HERMES_PDR_LEN_MAX (260) /* in bytes, from EK */
-#define HERMES_PDA_RECS_MAX (200) /* a guess */
-#define HERMES_PDA_LEN_MAX (1024) /* in bytes, from EK */
-#define HERMES_SCANRESULT_MAX (35)
-#define HERMES_CHINFORESULT_MAX (8)
-#define HERMES_MAX_MULTICAST (16)
-#define HERMES_MAGIC (0x7d1f)
-
-/*
- * Hermes register offsets
- */
-#define HERMES_CMD (0x00)
-#define HERMES_PARAM0 (0x02)
-#define HERMES_PARAM1 (0x04)
-#define HERMES_PARAM2 (0x06)
-#define HERMES_STATUS (0x08)
-#define HERMES_RESP0 (0x0A)
-#define HERMES_RESP1 (0x0C)
-#define HERMES_RESP2 (0x0E)
-#define HERMES_INFOFID (0x10)
-#define HERMES_RXFID (0x20)
-#define HERMES_ALLOCFID (0x22)
-#define HERMES_TXCOMPLFID (0x24)
-#define HERMES_SELECT0 (0x18)
-#define HERMES_OFFSET0 (0x1C)
-#define HERMES_DATA0 (0x36)
-#define HERMES_SELECT1 (0x1A)
-#define HERMES_OFFSET1 (0x1E)
-#define HERMES_DATA1 (0x38)
-#define HERMES_EVSTAT (0x30)
-#define HERMES_INTEN (0x32)
-#define HERMES_EVACK (0x34)
-#define HERMES_CONTROL (0x14)
-#define HERMES_SWSUPPORT0 (0x28)
-#define HERMES_SWSUPPORT1 (0x2A)
-#define HERMES_SWSUPPORT2 (0x2C)
-#define HERMES_AUXPAGE (0x3A)
-#define HERMES_AUXOFFSET (0x3C)
-#define HERMES_AUXDATA (0x3E)
-
-/*
- * CMD register bitmasks
- */
-#define HERMES_CMD_BUSY (0x8000)
-#define HERMES_CMD_AINFO (0x7f00)
-#define HERMES_CMD_MACPORT (0x0700)
-#define HERMES_CMD_RECL (0x0100)
-#define HERMES_CMD_WRITE (0x0100)
-#define HERMES_CMD_PROGMODE (0x0300)
-#define HERMES_CMD_CMDCODE (0x003f)
-
-/*
- * STATUS register bitmasks
- */
-#define HERMES_STATUS_RESULT (0x7f00)
-#define HERMES_STATUS_CMDCODE (0x003f)
-
-/*
- * OFFSET register bitmasks
- */
-#define HERMES_OFFSET_BUSY (0x8000)
-#define HERMES_OFFSET_ERR (0x4000)
-#define HERMES_OFFSET_DATAOFF (0x0ffe)
-
-/*
- * Event register bitmasks (INTEN, EVSTAT, EVACK)
- */
-#define HERMES_EV_TICK (0x8000)
-#define HERMES_EV_WTERR (0x4000)
-#define HERMES_EV_INFDROP (0x2000)
-#define HERMES_EV_INFO (0x0080)
-#define HERMES_EV_DTIM (0x0020)
-#define HERMES_EV_CMD (0x0010)
-#define HERMES_EV_ALLOC (0x0008)
-#define HERMES_EV_TXEXC (0x0004)
-#define HERMES_EV_TX (0x0002)
-#define HERMES_EV_RX (0x0001)
-
-/*
- * Command codes
- */
-/*--- Controller Commands ----------------------------*/
-#define HERMES_CMD_INIT (0x0000)
-#define HERMES_CMD_ENABLE (0x0001)
-#define HERMES_CMD_DISABLE (0x0002)
-#define HERMES_CMD_DIAG (0x0003)
-
-/*--- Buffer Mgmt Commands ---------------------------*/
-#define HERMES_CMD_ALLOC (0x000A)
-#define HERMES_CMD_TX (0x000B)
-
-/*--- Regulate Commands ------------------------------*/
-#define HERMES_CMD_NOTIFY (0x0010)
-#define HERMES_CMD_INQUIRE (0x0011)
-
-/*--- Configure Commands -----------------------------*/
-#define HERMES_CMD_ACCESS (0x0021)
-#define HERMES_CMD_DOWNLD (0x0022)
-
-/*--- Serial I/O Commands ----------------------------*/
-#define HERMES_CMD_READMIF (0x0030)
-#define HERMES_CMD_WRITEMIF (0x0031)
-
-/*--- Debugging Commands -----------------------------*/
-#define HERMES_CMD_TEST (0x0038)
-
-
-/* Test command arguments */
-#define HERMES_TEST_SET_CHANNEL 0x0800
-#define HERMES_TEST_MONITOR 0x0b00
-#define HERMES_TEST_STOP 0x0f00
-
-/* Authentication algorithms */
-#define HERMES_AUTH_OPEN 1
-#define HERMES_AUTH_SHARED_KEY 2
-
-/* WEP settings */
-#define HERMES_WEP_PRIVACY_INVOKED 0x0001
-#define HERMES_WEP_EXCL_UNENCRYPTED 0x0002
-#define HERMES_WEP_HOST_ENCRYPT 0x0010
-#define HERMES_WEP_HOST_DECRYPT 0x0080
-
-/* Symbol hostscan options */
-#define HERMES_HOSTSCAN_SYMBOL_5SEC 0x0001
-#define HERMES_HOSTSCAN_SYMBOL_ONCE 0x0002
-#define HERMES_HOSTSCAN_SYMBOL_PASSIVE 0x0040
-#define HERMES_HOSTSCAN_SYMBOL_BCAST 0x0080
-
-/*
- * Frame structures and constants
- */
-
-#define HERMES_DESCRIPTOR_OFFSET 0
-#define HERMES_802_11_OFFSET (14)
-#define HERMES_802_3_OFFSET (14+32)
-#define HERMES_802_2_OFFSET (14+32+14)
-#define HERMES_TXCNTL2_OFFSET (HERMES_802_3_OFFSET - 2)
-
-#define HERMES_RXSTAT_ERR (0x0003)
-#define HERMES_RXSTAT_BADCRC (0x0001)
-#define HERMES_RXSTAT_UNDECRYPTABLE (0x0002)
-#define HERMES_RXSTAT_MIC (0x0010) /* Frame contains MIC */
-#define HERMES_RXSTAT_MACPORT (0x0700)
-#define HERMES_RXSTAT_PCF (0x1000) /* Frame was received in CF period */
-#define HERMES_RXSTAT_MIC_KEY_ID (0x1800) /* MIC key used */
-#define HERMES_RXSTAT_MSGTYPE (0xE000)
-#define HERMES_RXSTAT_1042 (0x2000) /* RFC-1042 frame */
-#define HERMES_RXSTAT_TUNNEL (0x4000) /* bridge-tunnel encoded frame */
-#define HERMES_RXSTAT_WMP (0x6000) /* Wavelan-II Management Protocol frame */
-
-/* Shift amount for key ID in RXSTAT and TXCTRL */
-#define HERMES_MIC_KEY_ID_SHIFT 11
-
-struct hermes_tx_descriptor {
- __le16 status;
- __le16 reserved1;
- __le16 reserved2;
- __le32 sw_support;
- u8 retry_count;
- u8 tx_rate;
- __le16 tx_control;
-} __attribute__ ((packed));
-
-#define HERMES_TXSTAT_RETRYERR (0x0001)
-#define HERMES_TXSTAT_AGEDERR (0x0002)
-#define HERMES_TXSTAT_DISCON (0x0004)
-#define HERMES_TXSTAT_FORMERR (0x0008)
-
-#define HERMES_TXCTRL_TX_OK (0x0002) /* ?? interrupt on Tx complete */
-#define HERMES_TXCTRL_TX_EX (0x0004) /* ?? interrupt on Tx exception */
-#define HERMES_TXCTRL_802_11 (0x0008) /* We supply 802.11 header */
-#define HERMES_TXCTRL_MIC (0x0010) /* 802.3 + TKIP */
-#define HERMES_TXCTRL_MIC_KEY_ID (0x1800) /* MIC Key ID mask */
-#define HERMES_TXCTRL_ALT_RTRY (0x0020)
-
-/* Inquiry constants and data types */
-
-#define HERMES_INQ_TALLIES (0xF100)
-#define HERMES_INQ_SCAN (0xF101)
-#define HERMES_INQ_CHANNELINFO (0xF102)
-#define HERMES_INQ_HOSTSCAN (0xF103)
-#define HERMES_INQ_HOSTSCAN_SYMBOL (0xF104)
-#define HERMES_INQ_LINKSTATUS (0xF200)
-#define HERMES_INQ_SEC_STAT_AGERE (0xF202)
-
-struct hermes_tallies_frame {
- __le16 TxUnicastFrames;
- __le16 TxMulticastFrames;
- __le16 TxFragments;
- __le16 TxUnicastOctets;
- __le16 TxMulticastOctets;
- __le16 TxDeferredTransmissions;
- __le16 TxSingleRetryFrames;
- __le16 TxMultipleRetryFrames;
- __le16 TxRetryLimitExceeded;
- __le16 TxDiscards;
- __le16 RxUnicastFrames;
- __le16 RxMulticastFrames;
- __le16 RxFragments;
- __le16 RxUnicastOctets;
- __le16 RxMulticastOctets;
- __le16 RxFCSErrors;
- __le16 RxDiscards_NoBuffer;
- __le16 TxDiscardsWrongSA;
- __le16 RxWEPUndecryptable;
- __le16 RxMsgInMsgFragments;
- __le16 RxMsgInBadMsgFragments;
- /* Those last are probably not available in very old firmwares */
- __le16 RxDiscards_WEPICVError;
- __le16 RxDiscards_WEPExcluded;
-} __attribute__ ((packed));
-
-/* Grabbed from wlan-ng - Thanks Mark... - Jean II
- * This is the result of a scan inquiry command */
-/* Structure describing info about an Access Point */
-struct prism2_scan_apinfo {
- __le16 channel; /* Channel where the AP sits */
- __le16 noise; /* Noise level */
- __le16 level; /* Signal level */
- u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
- __le16 beacon_interv; /* Beacon interval */
- __le16 capabilities; /* Capabilities */
- __le16 essid_len; /* ESSID length */
- u8 essid[32]; /* ESSID of the network */
- u8 rates[10]; /* Bit rate supported */
- __le16 proberesp_rate; /* Data rate of the response frame */
- __le16 atim; /* ATIM window time, Kus (hostscan only) */
-} __attribute__ ((packed));
-
-/* Same stuff for the Lucent/Agere card.
- * Thanks to h1kari <h1kari AT dachb0den.com> - Jean II */
-struct agere_scan_apinfo {
- __le16 channel; /* Channel where the AP sits */
- __le16 noise; /* Noise level */
- __le16 level; /* Signal level */
- u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
- __le16 beacon_interv; /* Beacon interval */
- __le16 capabilities; /* Capabilities */
- /* bits: 0-ess, 1-ibss, 4-privacy [wep] */
- __le16 essid_len; /* ESSID length */
- u8 essid[32]; /* ESSID of the network */
-} __attribute__ ((packed));
-
-/* Moustafa: Scan structure for Symbol cards */
-struct symbol_scan_apinfo {
- u8 channel; /* Channel where the AP sits */
- u8 unknown1; /* 8 in 2.9x and 3.9x f/w, 0 otherwise */
- __le16 noise; /* Noise level */
- __le16 level; /* Signal level */
- u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
- __le16 beacon_interv; /* Beacon interval */
- __le16 capabilities; /* Capabilities */
- /* bits: 0-ess, 1-ibss, 4-privacy [wep] */
- __le16 essid_len; /* ESSID length */
- u8 essid[32]; /* ESSID of the network */
- __le16 rates[5]; /* Bit rate supported */
- __le16 basic_rates; /* Basic rates bitmask */
- u8 unknown2[6]; /* Always FF:FF:FF:FF:00:00 */
- u8 unknown3[8]; /* Always 0, appeared in f/w 3.91-68 */
-} __attribute__ ((packed));
-
-union hermes_scan_info {
- struct agere_scan_apinfo a;
- struct prism2_scan_apinfo p;
- struct symbol_scan_apinfo s;
-};
-
-/* Extended scan struct for HERMES_INQ_CHANNELINFO.
- * wl_lkm calls this an ACS scan (Automatic Channel Select).
- * Keep out of union hermes_scan_info because it is much bigger than
- * the older scan structures. */
-struct agere_ext_scan_info {
- __le16 reserved0;
-
- u8 noise;
- u8 level;
- u8 rx_flow;
- u8 rate;
- __le16 reserved1[2];
-
- __le16 frame_control;
- __le16 dur_id;
- u8 addr1[ETH_ALEN];
- u8 addr2[ETH_ALEN];
- u8 bssid[ETH_ALEN];
- __le16 sequence;
- u8 addr4[ETH_ALEN];
-
- __le16 data_length;
-
- /* Next 3 fields do not get filled in. */
- u8 daddr[ETH_ALEN];
- u8 saddr[ETH_ALEN];
- __le16 len_type;
-
- __le64 timestamp;
- __le16 beacon_interval;
- __le16 capabilities;
- u8 data[316];
-} __attribute__ ((packed));
-
-#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000)
-#define HERMES_LINKSTATUS_CONNECTED (0x0001)
-#define HERMES_LINKSTATUS_DISCONNECTED (0x0002)
-#define HERMES_LINKSTATUS_AP_CHANGE (0x0003)
-#define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004)
-#define HERMES_LINKSTATUS_AP_IN_RANGE (0x0005)
-#define HERMES_LINKSTATUS_ASSOC_FAILED (0x0006)
-
-struct hermes_linkstatus {
- __le16 linkstatus; /* Link status */
-} __attribute__ ((packed));
-
-struct hermes_response {
- u16 status, resp0, resp1, resp2;
-};
-
-/* "ID" structure - used for ESSID and station nickname */
-struct hermes_idstring {
- __le16 len;
- __le16 val[16];
-} __attribute__ ((packed));
-
-struct hermes_multicast {
- u8 addr[HERMES_MAX_MULTICAST][ETH_ALEN];
-} __attribute__ ((packed));
-
-/* Timeouts */
-#define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */
-
-/* Basic control structure */
-typedef struct hermes {
- void __iomem *iobase;
- int reg_spacing;
-#define HERMES_16BIT_REGSPACING 0
-#define HERMES_32BIT_REGSPACING 1
- u16 inten; /* Which interrupts should be enabled? */
-} hermes_t;
-
-/* Register access convenience macros */
-#define hermes_read_reg(hw, off) \
- (ioread16((hw)->iobase + ( (off) << (hw)->reg_spacing )))
-#define hermes_write_reg(hw, off, val) \
- (iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing)))
-#define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name)
-#define hermes_write_regn(hw, name, val) hermes_write_reg((hw), HERMES_##name, (val))
-
-/* Function prototypes */
-void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing);
-int hermes_init(hermes_t *hw);
-int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
- struct hermes_response *resp);
-int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
- u16 parm0, u16 parm1, u16 parm2,
- struct hermes_response *resp);
-int hermes_allocate(hermes_t *hw, u16 size, u16 *fid);
-
-int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
- u16 id, u16 offset);
-int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
- u16 id, u16 offset);
-int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
- u16 *length, void *buf);
-int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
- u16 length, const void *value);
-
-/* Inline functions */
-
-static inline int hermes_present(hermes_t *hw)
-{
- return hermes_read_regn(hw, SWSUPPORT0) == HERMES_MAGIC;
-}
-
-static inline void hermes_set_irqmask(hermes_t *hw, u16 events)
-{
- hw->inten = events;
- hermes_write_regn(hw, INTEN, events);
-}
-
-static inline int hermes_enable_port(hermes_t *hw, int port)
-{
- return hermes_docmd_wait(hw, HERMES_CMD_ENABLE | (port << 8),
- 0, NULL);
-}
-
-static inline int hermes_disable_port(hermes_t *hw, int port)
-{
- return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8),
- 0, NULL);
-}
-
-/* Initiate an INQUIRE command (tallies or scan). The result will come as an
- * information frame in __orinoco_ev_info() */
-static inline int hermes_inquire(hermes_t *hw, u16 rid)
-{
- return hermes_docmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL);
-}
-
-#define HERMES_BYTES_TO_RECLEN(n) ( (((n)+1)/2) + 1 )
-#define HERMES_RECLEN_TO_BYTES(n) ( ((n)-1) * 2 )
-
-/* Note that for the next two, the count is in 16-bit words, not bytes */
-static inline void hermes_read_words(struct hermes *hw, int off, void *buf, unsigned count)
-{
- off = off << hw->reg_spacing;
- ioread16_rep(hw->iobase + off, buf, count);
-}
-
-static inline void hermes_write_bytes(struct hermes *hw, int off,
- const char *buf, unsigned count)
-{
- off = off << hw->reg_spacing;
- iowrite16_rep(hw->iobase + off, buf, count >> 1);
- if (unlikely(count & 1))
- iowrite8(buf[count - 1], hw->iobase + off);
-}
-
-static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count)
-{
- unsigned i;
-
- off = off << hw->reg_spacing;
-
- for (i = 0; i < count; i++)
- iowrite16(0, hw->iobase + off);
-}
-
-#define HERMES_READ_RECORD(hw, bap, rid, buf) \
- (hermes_read_ltv((hw),(bap),(rid), sizeof(*buf), NULL, (buf)))
-#define HERMES_WRITE_RECORD(hw, bap, rid, buf) \
- (hermes_write_ltv((hw),(bap),(rid),HERMES_BYTES_TO_RECLEN(sizeof(*buf)),(buf)))
-
-static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word)
-{
- __le16 rec;
- int err;
-
- err = HERMES_READ_RECORD(hw, bap, rid, &rec);
- *word = le16_to_cpu(rec);
- return err;
-}
-
-static inline int hermes_write_wordrec(hermes_t *hw, int bap, u16 rid, u16 word)
-{
- __le16 rec = cpu_to_le16(word);
- return HERMES_WRITE_RECORD(hw, bap, rid, &rec);
-}
-
-#endif /* _HERMES_H */
+++ /dev/null
-/*
- * Hermes download helper driver.
- *
- * This could be entirely merged into hermes.c.
- *
- * I'm keeping it separate to minimise the amount of merging between
- * kernel upgrades. It also means the memory overhead for drivers that
- * don't need firmware download low.
- *
- * This driver:
- * - is capable of writing to the volatile area of the hermes device
- * - is currently not capable of writing to non-volatile areas
- * - provide helpers to identify and update plugin data
- * - is not capable of interpreting a fw image directly. That is up to
- * the main card driver.
- * - deals with Hermes I devices. It can probably be modified to deal
- * with Hermes II devices
- *
- * Copyright (C) 2007, David Kilroy
- *
- * Plug data code slightly modified from spectrum_cs driver
- * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org>
- * Portions based on information in wl_lkm_718 Agere driver
- * COPYRIGHT (C) 2001-2004 by Agere Systems Inc. All Rights Reserved
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include "hermes.h"
-#include "hermes_dld.h"
-
-MODULE_DESCRIPTION("Download helper for Lucent Hermes chipset");
-MODULE_AUTHOR("David Kilroy <kilroyd@gmail.com>");
-MODULE_LICENSE("Dual MPL/GPL");
-
-#define PFX "hermes_dld: "
-
-/*
- * AUX port access. To unlock the AUX port write the access keys to the
- * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
- * register. Then read it and make sure it's HERMES_AUX_ENABLED.
- */
-#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */
-#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */
-#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */
-#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */
-
-#define HERMES_AUX_PW0 0xFE01
-#define HERMES_AUX_PW1 0xDC23
-#define HERMES_AUX_PW2 0xBA45
-
-/* HERMES_CMD_DOWNLD */
-#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD)
-
-/* End markers used in dblocks */
-#define PDI_END 0x00000000 /* End of PDA */
-#define BLOCK_END 0xFFFFFFFF /* Last image block */
-#define TEXT_END 0x1A /* End of text header */
-
-/*
- * PDA == Production Data Area
- *
- * In principle, the max. size of the PDA is is 4096 words. Currently,
- * however, only about 500 bytes of this area are used.
- *
- * Some USB implementations can't handle sizes in excess of 1016. Note
- * that PDA is not actually used in those USB environments, but may be
- * retrieved by common code.
- */
-#define MAX_PDA_SIZE 1000
-
-/* Limit the amout we try to download in a single shot.
- * Size is in bytes.
- */
-#define MAX_DL_SIZE 1024
-#define LIMIT_PROGRAM_SIZE 0
-
-/*
- * The following structures have little-endian fields denoted by
- * the leading underscore. Don't access them directly - use inline
- * functions defined below.
- */
-
-/*
- * The binary image to be downloaded consists of series of data blocks.
- * Each block has the following structure.
- */
-struct dblock {
- __le32 addr; /* adapter address where to write the block */
- __le16 len; /* length of the data only, in bytes */
- char data[0]; /* data to be written */
-} __attribute__ ((packed));
-
-/*
- * Plug Data References are located in in the image after the last data
- * block. They refer to areas in the adapter memory where the plug data
- * items with matching ID should be written.
- */
-struct pdr {
- __le32 id; /* record ID */
- __le32 addr; /* adapter address where to write the data */
- __le32 len; /* expected length of the data, in bytes */
- char next[0]; /* next PDR starts here */
-} __attribute__ ((packed));
-
-/*
- * Plug Data Items are located in the EEPROM read from the adapter by
- * primary firmware. They refer to the device-specific data that should
- * be plugged into the secondary firmware.
- */
-struct pdi {
- __le16 len; /* length of ID and data, in words */
- __le16 id; /* record ID */
- char data[0]; /* plug data */
-} __attribute__ ((packed));
-
-/*** FW data block access functions ***/
-
-static inline u32
-dblock_addr(const struct dblock *blk)
-{
- return le32_to_cpu(blk->addr);
-}
-
-static inline u32
-dblock_len(const struct dblock *blk)
-{
- return le16_to_cpu(blk->len);
-}
-
-/*** PDR Access functions ***/
-
-static inline u32
-pdr_id(const struct pdr *pdr)
-{
- return le32_to_cpu(pdr->id);
-}
-
-static inline u32
-pdr_addr(const struct pdr *pdr)
-{
- return le32_to_cpu(pdr->addr);
-}
-
-static inline u32
-pdr_len(const struct pdr *pdr)
-{
- return le32_to_cpu(pdr->len);
-}
-
-/*** PDI Access functions ***/
-
-static inline u32
-pdi_id(const struct pdi *pdi)
-{
- return le16_to_cpu(pdi->id);
-}
-
-/* Return length of the data only, in bytes */
-static inline u32
-pdi_len(const struct pdi *pdi)
-{
- return 2 * (le16_to_cpu(pdi->len) - 1);
-}
-
-/*** Hermes AUX control ***/
-
-static inline void
-hermes_aux_setaddr(hermes_t *hw, u32 addr)
-{
- hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
- hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
-}
-
-static inline int
-hermes_aux_control(hermes_t *hw, int enabled)
-{
- int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED;
- int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE;
- int i;
-
- /* Already open? */
- if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state)
- return 0;
-
- hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
- hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
- hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
- hermes_write_reg(hw, HERMES_CONTROL, action);
-
- for (i = 0; i < 20; i++) {
- udelay(10);
- if (hermes_read_reg(hw, HERMES_CONTROL) ==
- desired_state)
- return 0;
- }
-
- return -EBUSY;
-}
-
-/*** Plug Data Functions ***/
-
-/*
- * Scan PDR for the record with the specified RECORD_ID.
- * If it's not found, return NULL.
- */
-static struct pdr *
-hermes_find_pdr(struct pdr *first_pdr, u32 record_id)
-{
- struct pdr *pdr = first_pdr;
- void *end = (void *)first_pdr + MAX_PDA_SIZE;
-
- while (((void *)pdr < end) &&
- (pdr_id(pdr) != PDI_END)) {
- /*
- * PDR area is currently not terminated by PDI_END.
- * It's followed by CRC records, which have the type
- * field where PDR has length. The type can be 0 or 1.
- */
- if (pdr_len(pdr) < 2)
- return NULL;
-
- /* If the record ID matches, we are done */
- if (pdr_id(pdr) == record_id)
- return pdr;
-
- pdr = (struct pdr *) pdr->next;
- }
- return NULL;
-}
-
-/* Scan production data items for a particular entry */
-static struct pdi *
-hermes_find_pdi(struct pdi *first_pdi, u32 record_id)
-{
- struct pdi *pdi = first_pdi;
-
- while (pdi_id(pdi) != PDI_END) {
-
- /* If the record ID matches, we are done */
- if (pdi_id(pdi) == record_id)
- return pdi;
-
- pdi = (struct pdi *) &pdi->data[pdi_len(pdi)];
- }
- return NULL;
-}
-
-/* Process one Plug Data Item - find corresponding PDR and plug it */
-static int
-hermes_plug_pdi(hermes_t *hw, struct pdr *first_pdr, const struct pdi *pdi)
-{
- struct pdr *pdr;
-
- /* Find the PDR corresponding to this PDI */
- pdr = hermes_find_pdr(first_pdr, pdi_id(pdi));
-
- /* No match is found, safe to ignore */
- if (!pdr)
- return 0;
-
- /* Lengths of the data in PDI and PDR must match */
- if (pdi_len(pdi) != pdr_len(pdr))
- return -EINVAL;
-
- /* do the actual plugging */
- hermes_aux_setaddr(hw, pdr_addr(pdr));
- hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi));
-
- return 0;
-}
-
-/* Read PDA from the adapter */
-int hermes_read_pda(hermes_t *hw,
- __le16 *pda,
- u32 pda_addr,
- u16 pda_len,
- int use_eeprom) /* can we get this into hw? */
-{
- int ret;
- u16 pda_size;
- u16 data_len = pda_len;
- __le16 *data = pda;
-
- if (use_eeprom) {
- /* PDA of spectrum symbol is in eeprom */
-
- /* Issue command to read EEPROM */
- ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
- if (ret)
- return ret;
- } else {
- /* wl_lkm does not include PDA size in the PDA area.
- * We will pad the information into pda, so other routines
- * don't have to be modified */
- pda[0] = cpu_to_le16(pda_len - 2);
- /* Includes CFG_PROD_DATA but not itself */
- pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
- data_len = pda_len - 4;
- data = pda + 2;
- }
-
- /* Open auxiliary port */
- ret = hermes_aux_control(hw, 1);
- printk(KERN_DEBUG PFX "AUX enable returned %d\n", ret);
- if (ret)
- return ret;
-
- /* read PDA from EEPROM */
- hermes_aux_setaddr(hw, pda_addr);
- hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2);
-
- /* Close aux port */
- ret = hermes_aux_control(hw, 0);
- printk(KERN_DEBUG PFX "AUX disable returned %d\n", ret);
-
- /* Check PDA length */
- pda_size = le16_to_cpu(pda[0]);
- printk(KERN_DEBUG PFX "Actual PDA length %d, Max allowed %d\n",
- pda_size, pda_len);
- if (pda_size > pda_len)
- return -EINVAL;
-
- return 0;
-}
-EXPORT_SYMBOL(hermes_read_pda);
-
-/* Parse PDA and write the records into the adapter
- *
- * Attempt to write every records that is in the specified pda
- * which also has a valid production data record for the firmware.
- */
-int hermes_apply_pda(hermes_t *hw,
- const char *first_pdr,
- const __le16 *pda)
-{
- int ret;
- const struct pdi *pdi;
- struct pdr *pdr;
-
- pdr = (struct pdr *) first_pdr;
-
- /* Go through every PDI and plug them into the adapter */
- pdi = (const struct pdi *) (pda + 2);
- while (pdi_id(pdi) != PDI_END) {
- ret = hermes_plug_pdi(hw, pdr, pdi);
- if (ret)
- return ret;
-
- /* Increment to the next PDI */
- pdi = (const struct pdi *) &pdi->data[pdi_len(pdi)];
- }
- return 0;
-}
-EXPORT_SYMBOL(hermes_apply_pda);
-
-/* Identify the total number of bytes in all blocks
- * including the header data.
- */
-size_t
-hermes_blocks_length(const char *first_block)
-{
- const struct dblock *blk = (const struct dblock *) first_block;
- int total_len = 0;
- int len;
-
- /* Skip all blocks to locate Plug Data References
- * (Spectrum CS) */
- while (dblock_addr(blk) != BLOCK_END) {
- len = dblock_len(blk);
- total_len += sizeof(*blk) + len;
- blk = (struct dblock *) &blk->data[len];
- }
-
- return total_len;
-}
-EXPORT_SYMBOL(hermes_blocks_length);
-
-/*** Hermes programming ***/
-
-/* About to start programming data (Hermes I)
- * offset is the entry point
- *
- * Spectrum_cs' Symbol fw does not require this
- * wl_lkm Agere fw does
- * Don't know about intersil
- */
-int hermesi_program_init(hermes_t *hw, u32 offset)
-{
- int err;
-
- /* Disable interrupts?*/
- /*hw->inten = 0x0;*/
- /*hermes_write_regn(hw, INTEN, 0);*/
- /*hermes_set_irqmask(hw, 0);*/
-
- /* Acknowledge any outstanding command */
- hermes_write_regn(hw, EVACK, 0xFFFF);
-
- /* Using doicmd_wait rather than docmd_wait */
- err = hermes_doicmd_wait(hw,
- 0x0100 | HERMES_CMD_INIT,
- 0, 0, 0, NULL);
- if (err)
- return err;
-
- err = hermes_doicmd_wait(hw,
- 0x0000 | HERMES_CMD_INIT,
- 0, 0, 0, NULL);
- if (err)
- return err;
-
- err = hermes_aux_control(hw, 1);
- printk(KERN_DEBUG PFX "AUX enable returned %d\n", err);
-
- if (err)
- return err;
-
- printk(KERN_DEBUG PFX "Enabling volatile, EP 0x%08x\n", offset);
- err = hermes_doicmd_wait(hw,
- HERMES_PROGRAM_ENABLE_VOLATILE,
- offset & 0xFFFFu,
- offset >> 16,
- 0,
- NULL);
- printk(KERN_DEBUG PFX "PROGRAM_ENABLE returned %d\n",
- err);
-
- return err;
-}
-EXPORT_SYMBOL(hermesi_program_init);
-
-/* Done programming data (Hermes I)
- *
- * Spectrum_cs' Symbol fw does not require this
- * wl_lkm Agere fw does
- * Don't know about intersil
- */
-int hermesi_program_end(hermes_t *hw)
-{
- struct hermes_response resp;
- int rc = 0;
- int err;
-
- rc = hermes_docmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp);
-
- printk(KERN_DEBUG PFX "PROGRAM_DISABLE returned %d, "
- "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
- rc, resp.resp0, resp.resp1, resp.resp2);
-
- if ((rc == 0) &&
- ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD))
- rc = -EIO;
-
- err = hermes_aux_control(hw, 0);
- printk(KERN_DEBUG PFX "AUX disable returned %d\n", err);
-
- /* Acknowledge any outstanding command */
- hermes_write_regn(hw, EVACK, 0xFFFF);
-
- /* Reinitialise, ignoring return */
- (void) hermes_doicmd_wait(hw, 0x0000 | HERMES_CMD_INIT,
- 0, 0, 0, NULL);
-
- return rc ? rc : err;
-}
-EXPORT_SYMBOL(hermesi_program_end);
-
-/* Program the data blocks */
-int hermes_program(hermes_t *hw, const char *first_block, const char *end)
-{
- const struct dblock *blk;
- u32 blkaddr;
- u32 blklen;
-#if LIMIT_PROGRAM_SIZE
- u32 addr;
- u32 len;
-#endif
-
- blk = (const struct dblock *) first_block;
-
- if ((const char *) blk > (end - sizeof(*blk)))
- return -EIO;
-
- blkaddr = dblock_addr(blk);
- blklen = dblock_len(blk);
-
- while ((blkaddr != BLOCK_END) &&
- (((const char *) blk + blklen) <= end)) {
- printk(KERN_DEBUG PFX
- "Programming block of length %d to address 0x%08x\n",
- blklen, blkaddr);
-
-#if !LIMIT_PROGRAM_SIZE
- /* wl_lkm driver splits this into writes of 2000 bytes */
- hermes_aux_setaddr(hw, blkaddr);
- hermes_write_bytes(hw, HERMES_AUXDATA, blk->data,
- blklen);
-#else
- len = (blklen < MAX_DL_SIZE) ? blklen : MAX_DL_SIZE;
- addr = blkaddr;
-
- while (addr < (blkaddr + blklen)) {
- printk(KERN_DEBUG PFX
- "Programming subblock of length %d "
- "to address 0x%08x. Data @ %p\n",
- len, addr, &blk->data[addr - blkaddr]);
-
- hermes_aux_setaddr(hw, addr);
- hermes_write_bytes(hw, HERMES_AUXDATA,
- &blk->data[addr - blkaddr],
- len);
-
- addr += len;
- len = ((blkaddr + blklen - addr) < MAX_DL_SIZE) ?
- (blkaddr + blklen - addr) : MAX_DL_SIZE;
- }
-#endif
- blk = (const struct dblock *) &blk->data[blklen];
-
- if ((const char *) blk > (end - sizeof(*blk)))
- return -EIO;
-
- blkaddr = dblock_addr(blk);
- blklen = dblock_len(blk);
- }
- return 0;
-}
-EXPORT_SYMBOL(hermes_program);
-
-static int __init init_hermes_dld(void)
-{
- return 0;
-}
-
-static void __exit exit_hermes_dld(void)
-{
-}
-
-module_init(init_hermes_dld);
-module_exit(exit_hermes_dld);
-
-/*** Default plugging data for Hermes I ***/
-/* Values from wl_lkm_718/hcf/dhf.c */
-
-#define DEFINE_DEFAULT_PDR(pid, length, data) \
-static const struct { \
- __le16 len; \
- __le16 id; \
- u8 val[length]; \
-} __attribute__ ((packed)) default_pdr_data_##pid = { \
- __constant_cpu_to_le16((sizeof(default_pdr_data_##pid)/ \
- sizeof(__le16)) - 1), \
- __constant_cpu_to_le16(pid), \
- data \
-}
-
-#define DEFAULT_PDR(pid) default_pdr_data_##pid
-
-/* HWIF Compatiblity */
-DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00");
-
-/* PPPPSign */
-DEFINE_DEFAULT_PDR(0x0108, 4, "\x00\x00\x00\x00");
-
-/* PPPPProf */
-DEFINE_DEFAULT_PDR(0x0109, 10, "\x00\x00\x00\x00\x03\x00\x00\x00\x00\x00");
-
-/* Antenna diversity */
-DEFINE_DEFAULT_PDR(0x0150, 2, "\x00\x3F");
-
-/* Modem VCO band Set-up */
-DEFINE_DEFAULT_PDR(0x0160, 28,
- "\x00\x00\x00\x00\x00\x00\x00\x00"
- "\x00\x00\x00\x00\x00\x00\x00\x00"
- "\x00\x00\x00\x00\x00\x00\x00\x00"
- "\x00\x00\x00\x00");
-
-/* Modem Rx Gain Table Values */
-DEFINE_DEFAULT_PDR(0x0161, 256,
- "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
- "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
- "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
- "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
- "\x3F\x01\x3E\01\x3E\x01\x3D\x01"
- "\x3D\x01\x3C\01\x3C\x01\x3B\x01"
- "\x3B\x01\x3A\01\x3A\x01\x39\x01"
- "\x39\x01\x38\01\x38\x01\x37\x01"
- "\x37\x01\x36\01\x36\x01\x35\x01"
- "\x35\x01\x34\01\x34\x01\x33\x01"
- "\x33\x01\x32\x01\x32\x01\x31\x01"
- "\x31\x01\x30\x01\x30\x01\x7B\x01"
- "\x7B\x01\x7A\x01\x7A\x01\x79\x01"
- "\x79\x01\x78\x01\x78\x01\x77\x01"
- "\x77\x01\x76\x01\x76\x01\x75\x01"
- "\x75\x01\x74\x01\x74\x01\x73\x01"
- "\x73\x01\x72\x01\x72\x01\x71\x01"
- "\x71\x01\x70\x01\x70\x01\x68\x01"
- "\x68\x01\x67\x01\x67\x01\x66\x01"
- "\x66\x01\x65\x01\x65\x01\x57\x01"
- "\x57\x01\x56\x01\x56\x01\x55\x01"
- "\x55\x01\x54\x01\x54\x01\x53\x01"
- "\x53\x01\x52\x01\x52\x01\x51\x01"
- "\x51\x01\x50\x01\x50\x01\x48\x01"
- "\x48\x01\x47\x01\x47\x01\x46\x01"
- "\x46\x01\x45\x01\x45\x01\x44\x01"
- "\x44\x01\x43\x01\x43\x01\x42\x01"
- "\x42\x01\x41\x01\x41\x01\x40\x01"
- "\x40\x01\x40\x01\x40\x01\x40\x01"
- "\x40\x01\x40\x01\x40\x01\x40\x01"
- "\x40\x01\x40\x01\x40\x01\x40\x01"
- "\x40\x01\x40\x01\x40\x01\x40\x01");
-
-/* Write PDA according to certain rules.
- *
- * For every production data record, look for a previous setting in
- * the pda, and use that.
- *
- * For certain records, use defaults if they are not found in pda.
- */
-int hermes_apply_pda_with_defaults(hermes_t *hw,
- const char *first_pdr,
- const __le16 *pda)
-{
- const struct pdr *pdr = (const struct pdr *) first_pdr;
- struct pdi *first_pdi = (struct pdi *) &pda[2];
- struct pdi *pdi;
- struct pdi *default_pdi = NULL;
- struct pdi *outdoor_pdi;
- void *end = (void *)first_pdr + MAX_PDA_SIZE;
- int record_id;
-
- while (((void *)pdr < end) &&
- (pdr_id(pdr) != PDI_END)) {
- /*
- * For spectrum_cs firmwares,
- * PDR area is currently not terminated by PDI_END.
- * It's followed by CRC records, which have the type
- * field where PDR has length. The type can be 0 or 1.
- */
- if (pdr_len(pdr) < 2)
- break;
- record_id = pdr_id(pdr);
-
- pdi = hermes_find_pdi(first_pdi, record_id);
- if (pdi)
- printk(KERN_DEBUG PFX "Found record 0x%04x at %p\n",
- record_id, pdi);
-
- switch (record_id) {
- case 0x110: /* Modem REFDAC values */
- case 0x120: /* Modem VGDAC values */
- outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1);
- default_pdi = NULL;
- if (outdoor_pdi) {
- pdi = outdoor_pdi;
- printk(KERN_DEBUG PFX
- "Using outdoor record 0x%04x at %p\n",
- record_id + 1, pdi);
- }
- break;
- case 0x5: /* HWIF Compatiblity */
- default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005);
- break;
- case 0x108: /* PPPPSign */
- default_pdi = (struct pdi *) &DEFAULT_PDR(0x0108);
- break;
- case 0x109: /* PPPPProf */
- default_pdi = (struct pdi *) &DEFAULT_PDR(0x0109);
- break;
- case 0x150: /* Antenna diversity */
- default_pdi = (struct pdi *) &DEFAULT_PDR(0x0150);
- break;
- case 0x160: /* Modem VCO band Set-up */
- default_pdi = (struct pdi *) &DEFAULT_PDR(0x0160);
- break;
- case 0x161: /* Modem Rx Gain Table Values */
- default_pdi = (struct pdi *) &DEFAULT_PDR(0x0161);
- break;
- default:
- default_pdi = NULL;
- break;
- }
- if (!pdi && default_pdi) {
- /* Use default */
- pdi = default_pdi;
- printk(KERN_DEBUG PFX
- "Using default record 0x%04x at %p\n",
- record_id, pdi);
- }
-
- if (pdi) {
- /* Lengths of the data in PDI and PDR must match */
- if (pdi_len(pdi) == pdr_len(pdr)) {
- /* do the actual plugging */
- hermes_aux_setaddr(hw, pdr_addr(pdr));
- hermes_write_bytes(hw, HERMES_AUXDATA,
- pdi->data, pdi_len(pdi));
- }
- }
-
- pdr++;
- }
- return 0;
-}
-EXPORT_SYMBOL(hermes_apply_pda_with_defaults);
+++ /dev/null
-/*
- * Copyright (C) 2007, David Kilroy
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-#ifndef _HERMES_DLD_H
-#define _HERMES_DLD_H
-
-#include "hermes.h"
-
-int hermesi_program_init(hermes_t *hw, u32 offset);
-int hermesi_program_end(hermes_t *hw);
-int hermes_program(hermes_t *hw, const char *first_block, const char *end);
-
-int hermes_read_pda(hermes_t *hw,
- __le16 *pda,
- u32 pda_addr,
- u16 pda_len,
- int use_eeprom);
-int hermes_apply_pda(hermes_t *hw,
- const char *first_pdr,
- const __le16 *pda);
-int hermes_apply_pda_with_defaults(hermes_t *hw,
- const char *first_pdr,
- const __le16 *pda);
-
-size_t hermes_blocks_length(const char *first_block);
-
-#endif /* _HERMES_DLD_H */
+++ /dev/null
-#ifndef _HERMES_RID_H
-#define _HERMES_RID_H
-
-/*
- * Configuration RIDs
- */
-#define HERMES_RID_CNFPORTTYPE 0xFC00
-#define HERMES_RID_CNFOWNMACADDR 0xFC01
-#define HERMES_RID_CNFDESIREDSSID 0xFC02
-#define HERMES_RID_CNFOWNCHANNEL 0xFC03
-#define HERMES_RID_CNFOWNSSID 0xFC04
-#define HERMES_RID_CNFOWNATIMWINDOW 0xFC05
-#define HERMES_RID_CNFSYSTEMSCALE 0xFC06
-#define HERMES_RID_CNFMAXDATALEN 0xFC07
-#define HERMES_RID_CNFWDSADDRESS 0xFC08
-#define HERMES_RID_CNFPMENABLED 0xFC09
-#define HERMES_RID_CNFPMEPS 0xFC0A
-#define HERMES_RID_CNFMULTICASTRECEIVE 0xFC0B
-#define HERMES_RID_CNFMAXSLEEPDURATION 0xFC0C
-#define HERMES_RID_CNFPMHOLDOVERDURATION 0xFC0D
-#define HERMES_RID_CNFOWNNAME 0xFC0E
-#define HERMES_RID_CNFOWNDTIMPERIOD 0xFC10
-#define HERMES_RID_CNFWDSADDRESS1 0xFC11
-#define HERMES_RID_CNFWDSADDRESS2 0xFC12
-#define HERMES_RID_CNFWDSADDRESS3 0xFC13
-#define HERMES_RID_CNFWDSADDRESS4 0xFC14
-#define HERMES_RID_CNFWDSADDRESS5 0xFC15
-#define HERMES_RID_CNFWDSADDRESS6 0xFC16
-#define HERMES_RID_CNFMULTICASTPMBUFFERING 0xFC17
-#define HERMES_RID_CNFWEPENABLED_AGERE 0xFC20
-#define HERMES_RID_CNFAUTHENTICATION_AGERE 0xFC21
-#define HERMES_RID_CNFMANDATORYBSSID_SYMBOL 0xFC21
-#define HERMES_RID_CNFDROPUNENCRYPTED 0xFC22
-#define HERMES_RID_CNFWEPDEFAULTKEYID 0xFC23
-#define HERMES_RID_CNFDEFAULTKEY0 0xFC24
-#define HERMES_RID_CNFDEFAULTKEY1 0xFC25
-#define HERMES_RID_CNFMWOROBUST_AGERE 0xFC25
-#define HERMES_RID_CNFDEFAULTKEY2 0xFC26
-#define HERMES_RID_CNFDEFAULTKEY3 0xFC27
-#define HERMES_RID_CNFWEPFLAGS_INTERSIL 0xFC28
-#define HERMES_RID_CNFWEPKEYMAPPINGTABLE 0xFC29
-#define HERMES_RID_CNFAUTHENTICATION 0xFC2A
-#define HERMES_RID_CNFMAXASSOCSTA 0xFC2B
-#define HERMES_RID_CNFKEYLENGTH_SYMBOL 0xFC2B
-#define HERMES_RID_CNFTXCONTROL 0xFC2C
-#define HERMES_RID_CNFROAMINGMODE 0xFC2D
-#define HERMES_RID_CNFHOSTAUTHENTICATION 0xFC2E
-#define HERMES_RID_CNFRCVCRCERROR 0xFC30
-#define HERMES_RID_CNFMMLIFE 0xFC31
-#define HERMES_RID_CNFALTRETRYCOUNT 0xFC32
-#define HERMES_RID_CNFBEACONINT 0xFC33
-#define HERMES_RID_CNFAPPCFINFO 0xFC34
-#define HERMES_RID_CNFSTAPCFINFO 0xFC35
-#define HERMES_RID_CNFPRIORITYQUSAGE 0xFC37
-#define HERMES_RID_CNFTIMCTRL 0xFC40
-#define HERMES_RID_CNFTHIRTY2TALLY 0xFC42
-#define HERMES_RID_CNFENHSECURITY 0xFC43
-#define HERMES_RID_CNFGROUPADDRESSES 0xFC80
-#define HERMES_RID_CNFCREATEIBSS 0xFC81
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD 0xFC82
-#define HERMES_RID_CNFRTSTHRESHOLD 0xFC83
-#define HERMES_RID_CNFTXRATECONTROL 0xFC84
-#define HERMES_RID_CNFPROMISCUOUSMODE 0xFC85
-#define HERMES_RID_CNFBASICRATES_SYMBOL 0xFC8A
-#define HERMES_RID_CNFPREAMBLE_SYMBOL 0xFC8C
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD0 0xFC90
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD1 0xFC91
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD2 0xFC92
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD3 0xFC93
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD4 0xFC94
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD5 0xFC95
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD6 0xFC96
-#define HERMES_RID_CNFRTSTHRESHOLD0 0xFC97
-#define HERMES_RID_CNFRTSTHRESHOLD1 0xFC98
-#define HERMES_RID_CNFRTSTHRESHOLD2 0xFC99
-#define HERMES_RID_CNFRTSTHRESHOLD3 0xFC9A
-#define HERMES_RID_CNFRTSTHRESHOLD4 0xFC9B
-#define HERMES_RID_CNFRTSTHRESHOLD5 0xFC9C
-#define HERMES_RID_CNFRTSTHRESHOLD6 0xFC9D
-#define HERMES_RID_CNFHOSTSCAN_SYMBOL 0xFCAB
-#define HERMES_RID_CNFSHORTPREAMBLE 0xFCB0
-#define HERMES_RID_CNFWEPKEYS_AGERE 0xFCB0
-#define HERMES_RID_CNFEXCLUDELONGPREAMBLE 0xFCB1
-#define HERMES_RID_CNFTXKEY_AGERE 0xFCB1
-#define HERMES_RID_CNFAUTHENTICATIONRSPTO 0xFCB2
-#define HERMES_RID_CNFSCANSSID_AGERE 0xFCB2
-#define HERMES_RID_CNFBASICRATES 0xFCB3
-#define HERMES_RID_CNFSUPPORTEDRATES 0xFCB4
-#define HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE 0xFCB4
-#define HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE 0xFCB5
-#define HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE 0xFCB6
-#define HERMES_RID_CNFADDMAPPEDTKIPKEY_AGERE 0xFCB7
-#define HERMES_RID_CNFREMMAPPEDTKIPKEY_AGERE 0xFCB8
-#define HERMES_RID_CNFSETWPACAPABILITIES_AGERE 0xFCB9
-#define HERMES_RID_CNFCACHEDPMKADDRESS 0xFCBA
-#define HERMES_RID_CNFREMOVEPMKADDRESS 0xFCBB
-#define HERMES_RID_CNFSCANCHANNELS2GHZ 0xFCC2
-#define HERMES_RID_CNFDISASSOCIATE 0xFCC8
-#define HERMES_RID_CNFTICKTIME 0xFCE0
-#define HERMES_RID_CNFSCANREQUEST 0xFCE1
-#define HERMES_RID_CNFJOINREQUEST 0xFCE2
-#define HERMES_RID_CNFAUTHENTICATESTATION 0xFCE3
-#define HERMES_RID_CNFCHANNELINFOREQUEST 0xFCE4
-#define HERMES_RID_CNFHOSTSCAN 0xFCE5
-
-/*
- * Information RIDs
- */
-#define HERMES_RID_MAXLOADTIME 0xFD00
-#define HERMES_RID_DOWNLOADBUFFER 0xFD01
-#define HERMES_RID_PRIID 0xFD02
-#define HERMES_RID_PRISUPRANGE 0xFD03
-#define HERMES_RID_CFIACTRANGES 0xFD04
-#define HERMES_RID_NICSERNUM 0xFD0A
-#define HERMES_RID_NICID 0xFD0B
-#define HERMES_RID_MFISUPRANGE 0xFD0C
-#define HERMES_RID_CFISUPRANGE 0xFD0D
-#define HERMES_RID_CHANNELLIST 0xFD10
-#define HERMES_RID_REGULATORYDOMAINS 0xFD11
-#define HERMES_RID_TEMPTYPE 0xFD12
-#define HERMES_RID_CIS 0xFD13
-#define HERMES_RID_STAID 0xFD20
-#define HERMES_RID_STASUPRANGE 0xFD21
-#define HERMES_RID_MFIACTRANGES 0xFD22
-#define HERMES_RID_CFIACTRANGES2 0xFD23
-#define HERMES_RID_SECONDARYVERSION_SYMBOL 0xFD24
-#define HERMES_RID_PORTSTATUS 0xFD40
-#define HERMES_RID_CURRENTSSID 0xFD41
-#define HERMES_RID_CURRENTBSSID 0xFD42
-#define HERMES_RID_COMMSQUALITY 0xFD43
-#define HERMES_RID_CURRENTTXRATE 0xFD44
-#define HERMES_RID_CURRENTBEACONINTERVAL 0xFD45
-#define HERMES_RID_CURRENTSCALETHRESHOLDS 0xFD46
-#define HERMES_RID_PROTOCOLRSPTIME 0xFD47
-#define HERMES_RID_SHORTRETRYLIMIT 0xFD48
-#define HERMES_RID_LONGRETRYLIMIT 0xFD49
-#define HERMES_RID_MAXTRANSMITLIFETIME 0xFD4A
-#define HERMES_RID_MAXRECEIVELIFETIME 0xFD4B
-#define HERMES_RID_CFPOLLABLE 0xFD4C
-#define HERMES_RID_AUTHENTICATIONALGORITHMS 0xFD4D
-#define HERMES_RID_PRIVACYOPTIONIMPLEMENTED 0xFD4F
-#define HERMES_RID_DBMCOMMSQUALITY_INTERSIL 0xFD51
-#define HERMES_RID_CURRENTTXRATE1 0xFD80
-#define HERMES_RID_CURRENTTXRATE2 0xFD81
-#define HERMES_RID_CURRENTTXRATE3 0xFD82
-#define HERMES_RID_CURRENTTXRATE4 0xFD83
-#define HERMES_RID_CURRENTTXRATE5 0xFD84
-#define HERMES_RID_CURRENTTXRATE6 0xFD85
-#define HERMES_RID_OWNMACADDR 0xFD86
-#define HERMES_RID_SCANRESULTSTABLE 0xFD88
-#define HERMES_RID_CURRENT_COUNTRY_INFO 0xFD89
-#define HERMES_RID_CURRENT_WPA_IE 0xFD8A
-#define HERMES_RID_CURRENT_TKIP_IV 0xFD8B
-#define HERMES_RID_CURRENT_ASSOC_REQ_INFO 0xFD8C
-#define HERMES_RID_CURRENT_ASSOC_RESP_INFO 0xFD8D
-#define HERMES_RID_TXQUEUEEMPTY 0xFD91
-#define HERMES_RID_PHYTYPE 0xFDC0
-#define HERMES_RID_CURRENTCHANNEL 0xFDC1
-#define HERMES_RID_CURRENTPOWERSTATE 0xFDC2
-#define HERMES_RID_CCAMODE 0xFDC3
-#define HERMES_RID_SUPPORTEDDATARATES 0xFDC6
-#define HERMES_RID_BUILDSEQ 0xFFFE
-#define HERMES_RID_FWID 0xFFFF
-
-#endif
+++ /dev/null
-/* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c)
- *
- * A driver for Hermes or Prism 2 chipset based PCMCIA wireless
- * adaptors, with Lucent/Agere, Intersil or Symbol firmware.
- *
- * Current maintainers (as of 29 September 2003) are:
- * Pavel Roskin <proski AT gnu.org>
- * and David Gibson <hermes AT gibson.dropbear.id.au>
- *
- * (C) Copyright David Gibson, IBM Corporation 2001-2003.
- * Copyright (C) 2000 David Gibson, Linuxcare Australia.
- * With some help from :
- * Copyright (C) 2001 Jean Tourrilhes, HP Labs
- * Copyright (C) 2001 Benjamin Herrenschmidt
- *
- * Based on dummy_cs.c 1.27 2000/06/12 21:27:25
- *
- * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy
- * AT fasta.fh-dortmund.de>
- * http://www.stud.fh-dortmund.de/~andy/wvlan/
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds AT users.sourceforge.net>. Portions created by David
- * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights
- * Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL. */
-
-/*
- * TODO
- * o Handle de-encapsulation within network layer, provide 802.11
- * headers (patch from Thomas 'Dent' Mirlacher)
- * o Fix possible races in SPY handling.
- * o Disconnect wireless extensions from fundamental configuration.
- * o (maybe) Software WEP support (patch from Stano Meduna).
- * o (maybe) Use multiple Tx buffers - driver handling queue
- * rather than firmware.
- */
-
-/* Locking and synchronization:
- *
- * The basic principle is that everything is serialized through a
- * single spinlock, priv->lock. The lock is used in user, bh and irq
- * context, so when taken outside hardirq context it should always be
- * taken with interrupts disabled. The lock protects both the
- * hardware and the struct orinoco_private.
- *
- * Another flag, priv->hw_unavailable indicates that the hardware is
- * unavailable for an extended period of time (e.g. suspended, or in
- * the middle of a hard reset). This flag is protected by the
- * spinlock. All code which touches the hardware should check the
- * flag after taking the lock, and if it is set, give up on whatever
- * they are doing and drop the lock again. The orinoco_lock()
- * function handles this (it unlocks and returns -EBUSY if
- * hw_unavailable is non-zero).
- */
-
-#define DRIVER_NAME "orinoco"
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/firmware.h>
-#include <linux/if_arp.h>
-#include <linux/wireless.h>
-#include <linux/ieee80211.h>
-#include <net/iw_handler.h>
-
-#include <linux/scatterlist.h>
-#include <linux/crypto.h>
-
-#include "hermes_rid.h"
-#include "hermes_dld.h"
-#include "orinoco.h"
-
-/********************************************************************/
-/* Module information */
-/********************************************************************/
-
-MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>");
-MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards");
-MODULE_LICENSE("Dual MPL/GPL");
-
-/* Level of debugging. Used in the macros in orinoco.h */
-#ifdef ORINOCO_DEBUG
-int orinoco_debug = ORINOCO_DEBUG;
-module_param(orinoco_debug, int, 0644);
-MODULE_PARM_DESC(orinoco_debug, "Debug level");
-EXPORT_SYMBOL(orinoco_debug);
-#endif
-
-static int suppress_linkstatus; /* = 0 */
-module_param(suppress_linkstatus, bool, 0644);
-MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes");
-static int ignore_disconnect; /* = 0 */
-module_param(ignore_disconnect, int, 0644);
-MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer");
-
-static int force_monitor; /* = 0 */
-module_param(force_monitor, int, 0644);
-MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions");
-
-/********************************************************************/
-/* Compile time configuration and compatibility stuff */
-/********************************************************************/
-
-/* We do this this way to avoid ifdefs in the actual code */
-#ifdef WIRELESS_SPY
-#define SPY_NUMBER(priv) (priv->spy_data.spy_number)
-#else
-#define SPY_NUMBER(priv) 0
-#endif /* WIRELESS_SPY */
-
-/********************************************************************/
-/* Internal constants */
-/********************************************************************/
-
-/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
-static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
-#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
-
-#define ORINOCO_MIN_MTU 256
-#define ORINOCO_MAX_MTU (IEEE80211_MAX_DATA_LEN - ENCAPS_OVERHEAD)
-
-#define SYMBOL_MAX_VER_LEN (14)
-#define USER_BAP 0
-#define IRQ_BAP 1
-#define MAX_IRQLOOPS_PER_IRQ 10
-#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of
- * how many events the
- * device could
- * legitimately generate */
-#define SMALL_KEY_SIZE 5
-#define LARGE_KEY_SIZE 13
-#define TX_NICBUF_SIZE_BUG 1585 /* Bug in Symbol firmware */
-
-#define DUMMY_FID 0xFFFF
-
-/*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \
- HERMES_MAX_MULTICAST : 0)*/
-#define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST)
-
-#define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \
- | HERMES_EV_TX | HERMES_EV_TXEXC \
- | HERMES_EV_WTERR | HERMES_EV_INFO \
- | HERMES_EV_INFDROP )
-
-#define MAX_RID_LEN 1024
-
-static const struct iw_handler_def orinoco_handler_def;
-static const struct ethtool_ops orinoco_ethtool_ops;
-
-/********************************************************************/
-/* Data tables */
-/********************************************************************/
-
-/* The frequency of each channel in MHz */
-static const long channel_frequency[] = {
- 2412, 2417, 2422, 2427, 2432, 2437, 2442,
- 2447, 2452, 2457, 2462, 2467, 2472, 2484
-};
-#define NUM_CHANNELS ARRAY_SIZE(channel_frequency)
-
-/* This tables gives the actual meanings of the bitrate IDs returned
- * by the firmware. */
-static struct {
- int bitrate; /* in 100s of kilobits */
- int automatic;
- u16 agere_txratectrl;
- u16 intersil_txratectrl;
-} bitrate_table[] = {
- {110, 1, 3, 15}, /* Entry 0 is the default */
- {10, 0, 1, 1},
- {10, 1, 1, 1},
- {20, 0, 2, 2},
- {20, 1, 6, 3},
- {55, 0, 4, 4},
- {55, 1, 7, 7},
- {110, 0, 5, 8},
-};
-#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table)
-
-/********************************************************************/
-/* Data types */
-/********************************************************************/
-
-/* Beginning of the Tx descriptor, used in TxExc handling */
-struct hermes_txexc_data {
- struct hermes_tx_descriptor desc;
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
-} __attribute__ ((packed));
-
-/* Rx frame header except compatibility 802.3 header */
-struct hermes_rx_descriptor {
- /* Control */
- __le16 status;
- __le32 time;
- u8 silence;
- u8 signal;
- u8 rate;
- u8 rxflow;
- __le32 reserved;
-
- /* 802.11 header */
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
- u8 addr2[ETH_ALEN];
- u8 addr3[ETH_ALEN];
- __le16 seq_ctl;
- u8 addr4[ETH_ALEN];
-
- /* Data length */
- __le16 data_len;
-} __attribute__ ((packed));
-
-/********************************************************************/
-/* Function prototypes */
-/********************************************************************/
-
-static int __orinoco_program_rids(struct net_device *dev);
-static void __orinoco_set_multicast_list(struct net_device *dev);
-
-/********************************************************************/
-/* Michael MIC crypto setup */
-/********************************************************************/
-#define MICHAEL_MIC_LEN 8
-static int orinoco_mic_init(struct orinoco_private *priv)
-{
- priv->tx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0);
- if (IS_ERR(priv->tx_tfm_mic)) {
- printk(KERN_DEBUG "orinoco_mic_init: could not allocate "
- "crypto API michael_mic\n");
- priv->tx_tfm_mic = NULL;
- return -ENOMEM;
- }
-
- priv->rx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0);
- if (IS_ERR(priv->rx_tfm_mic)) {
- printk(KERN_DEBUG "orinoco_mic_init: could not allocate "
- "crypto API michael_mic\n");
- priv->rx_tfm_mic = NULL;
- return -ENOMEM;
- }
-
- return 0;
-}
-
-static void orinoco_mic_free(struct orinoco_private *priv)
-{
- if (priv->tx_tfm_mic)
- crypto_free_hash(priv->tx_tfm_mic);
- if (priv->rx_tfm_mic)
- crypto_free_hash(priv->rx_tfm_mic);
-}
-
-static int michael_mic(struct crypto_hash *tfm_michael, u8 *key,
- u8 *da, u8 *sa, u8 priority,
- u8 *data, size_t data_len, u8 *mic)
-{
- struct hash_desc desc;
- struct scatterlist sg[2];
- u8 hdr[ETH_HLEN + 2]; /* size of header + padding */
-
- if (tfm_michael == NULL) {
- printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n");
- return -1;
- }
-
- /* Copy header into buffer. We need the padding on the end zeroed */
- memcpy(&hdr[0], da, ETH_ALEN);
- memcpy(&hdr[ETH_ALEN], sa, ETH_ALEN);
- hdr[ETH_ALEN*2] = priority;
- hdr[ETH_ALEN*2+1] = 0;
- hdr[ETH_ALEN*2+2] = 0;
- hdr[ETH_ALEN*2+3] = 0;
-
- /* Use scatter gather to MIC header and data in one go */
- sg_init_table(sg, 2);
- sg_set_buf(&sg[0], hdr, sizeof(hdr));
- sg_set_buf(&sg[1], data, data_len);
-
- if (crypto_hash_setkey(tfm_michael, key, MIC_KEYLEN))
- return -1;
-
- desc.tfm = tfm_michael;
- desc.flags = 0;
- return crypto_hash_digest(&desc, sg, data_len + sizeof(hdr),
- mic);
-}
-
-/********************************************************************/
-/* Internal helper functions */
-/********************************************************************/
-
-static inline void set_port_type(struct orinoco_private *priv)
-{
- switch (priv->iw_mode) {
- case IW_MODE_INFRA:
- priv->port_type = 1;
- priv->createibss = 0;
- break;
- case IW_MODE_ADHOC:
- if (priv->prefer_port3) {
- priv->port_type = 3;
- priv->createibss = 0;
- } else {
- priv->port_type = priv->ibss_port;
- priv->createibss = 1;
- }
- break;
- case IW_MODE_MONITOR:
- priv->port_type = 3;
- priv->createibss = 0;
- break;
- default:
- printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n",
- priv->ndev->name);
- }
-}
-
-#define ORINOCO_MAX_BSS_COUNT 64
-static int orinoco_bss_data_allocate(struct orinoco_private *priv)
-{
- if (priv->bss_xbss_data)
- return 0;
-
- if (priv->has_ext_scan)
- priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT *
- sizeof(struct xbss_element),
- GFP_KERNEL);
- else
- priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT *
- sizeof(struct bss_element),
- GFP_KERNEL);
-
- if (!priv->bss_xbss_data) {
- printk(KERN_WARNING "Out of memory allocating beacons");
- return -ENOMEM;
- }
- return 0;
-}
-
-static void orinoco_bss_data_free(struct orinoco_private *priv)
-{
- kfree(priv->bss_xbss_data);
- priv->bss_xbss_data = NULL;
-}
-
-#define PRIV_BSS ((struct bss_element *)priv->bss_xbss_data)
-#define PRIV_XBSS ((struct xbss_element *)priv->bss_xbss_data)
-static void orinoco_bss_data_init(struct orinoco_private *priv)
-{
- int i;
-
- INIT_LIST_HEAD(&priv->bss_free_list);
- INIT_LIST_HEAD(&priv->bss_list);
- if (priv->has_ext_scan)
- for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++)
- list_add_tail(&(PRIV_XBSS[i].list),
- &priv->bss_free_list);
- else
- for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++)
- list_add_tail(&(PRIV_BSS[i].list),
- &priv->bss_free_list);
-
-}
-
-static inline u8 *orinoco_get_ie(u8 *data, size_t len,
- enum ieee80211_eid eid)
-{
- u8 *p = data;
- while ((p + 2) < (data + len)) {
- if (p[0] == eid)
- return p;
- p += p[1] + 2;
- }
- return NULL;
-}
-
-#define WPA_OUI_TYPE "\x00\x50\xF2\x01"
-#define WPA_SELECTOR_LEN 4
-static inline u8 *orinoco_get_wpa_ie(u8 *data, size_t len)
-{
- u8 *p = data;
- while ((p + 2 + WPA_SELECTOR_LEN) < (data + len)) {
- if ((p[0] == WLAN_EID_GENERIC) &&
- (memcmp(&p[2], WPA_OUI_TYPE, WPA_SELECTOR_LEN) == 0))
- return p;
- p += p[1] + 2;
- }
- return NULL;
-}
-
-
-/********************************************************************/
-/* Download functionality */
-/********************************************************************/
-
-struct fw_info {
- char *pri_fw;
- char *sta_fw;
- char *ap_fw;
- u32 pda_addr;
- u16 pda_size;
-};
-
-const static struct fw_info orinoco_fw[] = {
- { "", "agere_sta_fw.bin", "agere_ap_fw.bin", 0x00390000, 1000 },
- { "", "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 },
- { "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", "", 0x00003100, 512 }
-};
-
-/* Structure used to access fields in FW
- * Make sure LE decoding macros are used
- */
-struct orinoco_fw_header {
- char hdr_vers[6]; /* ASCII string for header version */
- __le16 headersize; /* Total length of header */
- __le32 entry_point; /* NIC entry point */
- __le32 blocks; /* Number of blocks to program */
- __le32 block_offset; /* Offset of block data from eof header */
- __le32 pdr_offset; /* Offset to PDR data from eof header */
- __le32 pri_offset; /* Offset to primary plug data */
- __le32 compat_offset; /* Offset to compatibility data*/
- char signature[0]; /* FW signature length headersize-20 */
-} __attribute__ ((packed));
-
-/* Download either STA or AP firmware into the card. */
-static int
-orinoco_dl_firmware(struct orinoco_private *priv,
- const struct fw_info *fw,
- int ap)
-{
- /* Plug Data Area (PDA) */
- __le16 *pda;
-
- hermes_t *hw = &priv->hw;
- const struct firmware *fw_entry;
- const struct orinoco_fw_header *hdr;
- const unsigned char *first_block;
- const unsigned char *end;
- const char *firmware;
- struct net_device *dev = priv->ndev;
- int err = 0;
-
- pda = kzalloc(fw->pda_size, GFP_KERNEL);
- if (!pda)
- return -ENOMEM;
-
- if (ap)
- firmware = fw->ap_fw;
- else
- firmware = fw->sta_fw;
-
- printk(KERN_DEBUG "%s: Attempting to download firmware %s\n",
- dev->name, firmware);
-
- /* Read current plug data */
- err = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 0);
- printk(KERN_DEBUG "%s: Read PDA returned %d\n", dev->name, err);
- if (err)
- goto free;
-
- if (priv->cached_fw)
- fw_entry = priv->cached_fw;
- else {
- err = request_firmware(&fw_entry, firmware, priv->dev);
- if (err) {
- printk(KERN_ERR "%s: Cannot find firmware %s\n",
- dev->name, firmware);
- err = -ENOENT;
- goto free;
- }
- priv->cached_fw = fw_entry;
- }
-
- hdr = (const struct orinoco_fw_header *) fw_entry->data;
-
- /* Enable aux port to allow programming */
- err = hermesi_program_init(hw, le32_to_cpu(hdr->entry_point));
- printk(KERN_DEBUG "%s: Program init returned %d\n", dev->name, err);
- if (err != 0)
- goto abort;
-
- /* Program data */
- first_block = (fw_entry->data +
- le16_to_cpu(hdr->headersize) +
- le32_to_cpu(hdr->block_offset));
- end = fw_entry->data + fw_entry->size;
-
- err = hermes_program(hw, first_block, end);
- printk(KERN_DEBUG "%s: Program returned %d\n", dev->name, err);
- if (err != 0)
- goto abort;
-
- /* Update production data */
- first_block = (fw_entry->data +
- le16_to_cpu(hdr->headersize) +
- le32_to_cpu(hdr->pdr_offset));
-
- err = hermes_apply_pda_with_defaults(hw, first_block, pda);
- printk(KERN_DEBUG "%s: Apply PDA returned %d\n", dev->name, err);
- if (err)
- goto abort;
-
- /* Tell card we've finished */
- err = hermesi_program_end(hw);
- printk(KERN_DEBUG "%s: Program end returned %d\n", dev->name, err);
- if (err != 0)
- goto abort;
-
- /* Check if we're running */
- printk(KERN_DEBUG "%s: hermes_present returned %d\n",
- dev->name, hermes_present(hw));
-
-abort:
- /* In case of error, assume firmware was bogus and release it */
- if (err) {
- priv->cached_fw = NULL;
- release_firmware(fw_entry);
- }
-
-free:
- kfree(pda);
- return err;
-}
-
-/* End markers */
-#define TEXT_END 0x1A /* End of text header */
-
-/*
- * Process a firmware image - stop the card, load the firmware, reset
- * the card and make sure it responds. For the secondary firmware take
- * care of the PDA - read it and then write it on top of the firmware.
- */
-static int
-symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw,
- const unsigned char *image, const unsigned char *end,
- int secondary)
-{
- hermes_t *hw = &priv->hw;
- int ret = 0;
- const unsigned char *ptr;
- const unsigned char *first_block;
-
- /* Plug Data Area (PDA) */
- __le16 *pda = NULL;
-
- /* Binary block begins after the 0x1A marker */
- ptr = image;
- while (*ptr++ != TEXT_END);
- first_block = ptr;
-
- /* Read the PDA from EEPROM */
- if (secondary) {
- pda = kzalloc(fw->pda_size, GFP_KERNEL);
- if (!pda)
- return -ENOMEM;
-
- ret = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 1);
- if (ret)
- goto free;
- }
-
- /* Stop the firmware, so that it can be safely rewritten */
- if (priv->stop_fw) {
- ret = priv->stop_fw(priv, 1);
- if (ret)
- goto free;
- }
-
- /* Program the adapter with new firmware */
- ret = hermes_program(hw, first_block, end);
- if (ret)
- goto free;
-
- /* Write the PDA to the adapter */
- if (secondary) {
- size_t len = hermes_blocks_length(first_block);
- ptr = first_block + len;
- ret = hermes_apply_pda(hw, ptr, pda);
- kfree(pda);
- if (ret)
- return ret;
- }
-
- /* Run the firmware */
- if (priv->stop_fw) {
- ret = priv->stop_fw(priv, 0);
- if (ret)
- return ret;
- }
-
- /* Reset hermes chip and make sure it responds */
- ret = hermes_init(hw);
-
- /* hermes_reset() should return 0 with the secondary firmware */
- if (secondary && ret != 0)
- return -ENODEV;
-
- /* And this should work with any firmware */
- if (!hermes_present(hw))
- return -ENODEV;
-
- return 0;
-
-free:
- kfree(pda);
- return ret;
-}
-
-
-/*
- * Download the firmware into the card, this also does a PCMCIA soft
- * reset on the card, to make sure it's in a sane state.
- */
-static int
-symbol_dl_firmware(struct orinoco_private *priv,
- const struct fw_info *fw)
-{
- struct net_device *dev = priv->ndev;
- int ret;
- const struct firmware *fw_entry;
-
- if (request_firmware(&fw_entry, fw->pri_fw,
- priv->dev) != 0) {
- printk(KERN_ERR "%s: Cannot find firmware: %s\n",
- dev->name, fw->pri_fw);
- return -ENOENT;
- }
-
- /* Load primary firmware */
- ret = symbol_dl_image(priv, fw, fw_entry->data,
- fw_entry->data + fw_entry->size, 0);
- release_firmware(fw_entry);
- if (ret) {
- printk(KERN_ERR "%s: Primary firmware download failed\n",
- dev->name);
- return ret;
- }
-
- if (request_firmware(&fw_entry, fw->sta_fw,
- priv->dev) != 0) {
- printk(KERN_ERR "%s: Cannot find firmware: %s\n",
- dev->name, fw->sta_fw);
- return -ENOENT;
- }
-
- /* Load secondary firmware */
- ret = symbol_dl_image(priv, fw, fw_entry->data,
- fw_entry->data + fw_entry->size, 1);
- release_firmware(fw_entry);
- if (ret) {
- printk(KERN_ERR "%s: Secondary firmware download failed\n",
- dev->name);
- }
-
- return ret;
-}
-
-static int orinoco_download(struct orinoco_private *priv)
-{
- int err = 0;
- /* Reload firmware */
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE:
- /* case FIRMWARE_TYPE_INTERSIL: */
- err = orinoco_dl_firmware(priv,
- &orinoco_fw[priv->firmware_type], 0);
- break;
-
- case FIRMWARE_TYPE_SYMBOL:
- err = symbol_dl_firmware(priv,
- &orinoco_fw[priv->firmware_type]);
- break;
- case FIRMWARE_TYPE_INTERSIL:
- break;
- }
- /* TODO: if we fail we probably need to reinitialise
- * the driver */
-
- return err;
-}
-
-/********************************************************************/
-/* Device methods */
-/********************************************************************/
-
-static int orinoco_open(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
- int err;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = __orinoco_up(dev);
-
- if (! err)
- priv->open = 1;
-
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_stop(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int err = 0;
-
- /* We mustn't use orinoco_lock() here, because we need to be
- able to close the interface even if hw_unavailable is set
- (e.g. as we're released after a PC Card removal) */
- spin_lock_irq(&priv->lock);
-
- priv->open = 0;
-
- err = __orinoco_down(dev);
-
- spin_unlock_irq(&priv->lock);
-
- return err;
-}
-
-static struct net_device_stats *orinoco_get_stats(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
-
- return &priv->stats;
-}
-
-static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- struct iw_statistics *wstats = &priv->wstats;
- int err;
- unsigned long flags;
-
- if (! netif_device_present(dev)) {
- printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n",
- dev->name);
- return NULL; /* FIXME: Can we do better than this? */
- }
-
- /* If busy, return the old stats. Returning NULL may cause
- * the interface to disappear from /proc/net/wireless */
- if (orinoco_lock(priv, &flags) != 0)
- return wstats;
-
- /* We can't really wait for the tallies inquiry command to
- * complete, so we just use the previous results and trigger
- * a new tallies inquiry command for next time - Jean II */
- /* FIXME: Really we should wait for the inquiry to come back -
- * as it is the stats we give don't make a whole lot of sense.
- * Unfortunately, it's not clear how to do that within the
- * wireless extensions framework: I think we're in user
- * context, but a lock seems to be held by the time we get in
- * here so we're not safe to sleep here. */
- hermes_inquire(hw, HERMES_INQ_TALLIES);
-
- if (priv->iw_mode == IW_MODE_ADHOC) {
- memset(&wstats->qual, 0, sizeof(wstats->qual));
- /* If a spy address is defined, we report stats of the
- * first spy address - Jean II */
- if (SPY_NUMBER(priv)) {
- wstats->qual.qual = priv->spy_data.spy_stat[0].qual;
- wstats->qual.level = priv->spy_data.spy_stat[0].level;
- wstats->qual.noise = priv->spy_data.spy_stat[0].noise;
- wstats->qual.updated = priv->spy_data.spy_stat[0].updated;
- }
- } else {
- struct {
- __le16 qual, signal, noise, unused;
- } __attribute__ ((packed)) cq;
-
- err = HERMES_READ_RECORD(hw, USER_BAP,
- HERMES_RID_COMMSQUALITY, &cq);
-
- if (!err) {
- wstats->qual.qual = (int)le16_to_cpu(cq.qual);
- wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95;
- wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95;
- wstats->qual.updated = 7;
- }
- }
-
- orinoco_unlock(priv, &flags);
- return wstats;
-}
-
-static void orinoco_set_multicast_list(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0) {
- printk(KERN_DEBUG "%s: orinoco_set_multicast_list() "
- "called when hw_unavailable\n", dev->name);
- return;
- }
-
- __orinoco_set_multicast_list(dev);
- orinoco_unlock(priv, &flags);
-}
-
-static int orinoco_change_mtu(struct net_device *dev, int new_mtu)
-{
- struct orinoco_private *priv = netdev_priv(dev);
-
- if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) )
- return -EINVAL;
-
- /* MTU + encapsulation + header length */
- if ( (new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) >
- (priv->nicbuf_size - ETH_HLEN) )
- return -EINVAL;
-
- dev->mtu = new_mtu;
-
- return 0;
-}
-
-/********************************************************************/
-/* Tx path */
-/********************************************************************/
-
-static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
- hermes_t *hw = &priv->hw;
- int err = 0;
- u16 txfid = priv->txfid;
- struct ethhdr *eh;
- int tx_control;
- unsigned long flags;
-
- if (! netif_running(dev)) {
- printk(KERN_ERR "%s: Tx on stopped device!\n",
- dev->name);
- return NETDEV_TX_BUSY;
- }
-
- if (netif_queue_stopped(dev)) {
- printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
- dev->name);
- return NETDEV_TX_BUSY;
- }
-
- if (orinoco_lock(priv, &flags) != 0) {
- printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n",
- dev->name);
- return NETDEV_TX_BUSY;
- }
-
- if (! netif_carrier_ok(dev) || (priv->iw_mode == IW_MODE_MONITOR)) {
- /* Oops, the firmware hasn't established a connection,
- silently drop the packet (this seems to be the
- safest approach). */
- goto drop;
- }
-
- /* Check packet length */
- if (skb->len < ETH_HLEN)
- goto drop;
-
- tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX;
-
- if (priv->encode_alg == IW_ENCODE_ALG_TKIP)
- tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) |
- HERMES_TXCTRL_MIC;
-
- if (priv->has_alt_txcntl) {
- /* WPA enabled firmwares have tx_cntl at the end of
- * the 802.11 header. So write zeroed descriptor and
- * 802.11 header at the same time
- */
- char desc[HERMES_802_3_OFFSET];
- __le16 *txcntl = (__le16 *) &desc[HERMES_TXCNTL2_OFFSET];
-
- memset(&desc, 0, sizeof(desc));
-
- *txcntl = cpu_to_le16(tx_control);
- err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
- txfid, 0);
- if (err) {
- if (net_ratelimit())
- printk(KERN_ERR "%s: Error %d writing Tx "
- "descriptor to BAP\n", dev->name, err);
- goto busy;
- }
- } else {
- struct hermes_tx_descriptor desc;
-
- memset(&desc, 0, sizeof(desc));
-
- desc.tx_control = cpu_to_le16(tx_control);
- err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
- txfid, 0);
- if (err) {
- if (net_ratelimit())
- printk(KERN_ERR "%s: Error %d writing Tx "
- "descriptor to BAP\n", dev->name, err);
- goto busy;
- }
-
- /* Clear the 802.11 header and data length fields - some
- * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
- * if this isn't done. */
- hermes_clear_words(hw, HERMES_DATA0,
- HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
- }
-
- eh = (struct ethhdr *)skb->data;
-
- /* Encapsulate Ethernet-II frames */
- if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
- struct header_struct {
- struct ethhdr eth; /* 802.3 header */
- u8 encap[6]; /* 802.2 header */
- } __attribute__ ((packed)) hdr;
-
- /* Strip destination and source from the data */
- skb_pull(skb, 2 * ETH_ALEN);
-
- /* And move them to a separate header */
- memcpy(&hdr.eth, eh, 2 * ETH_ALEN);
- hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len);
- memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr));
-
- /* Insert the SNAP header */
- if (skb_headroom(skb) < sizeof(hdr)) {
- printk(KERN_ERR
- "%s: Not enough headroom for 802.2 headers %d\n",
- dev->name, skb_headroom(skb));
- goto drop;
- }
- eh = (struct ethhdr *) skb_push(skb, sizeof(hdr));
- memcpy(eh, &hdr, sizeof(hdr));
- }
-
- err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len,
- txfid, HERMES_802_3_OFFSET);
- if (err) {
- printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
- dev->name, err);
- goto busy;
- }
-
- /* Calculate Michael MIC */
- if (priv->encode_alg == IW_ENCODE_ALG_TKIP) {
- u8 mic_buf[MICHAEL_MIC_LEN + 1];
- u8 *mic;
- size_t offset;
- size_t len;
-
- if (skb->len % 2) {
- /* MIC start is on an odd boundary */
- mic_buf[0] = skb->data[skb->len - 1];
- mic = &mic_buf[1];
- offset = skb->len - 1;
- len = MICHAEL_MIC_LEN + 1;
- } else {
- mic = &mic_buf[0];
- offset = skb->len;
- len = MICHAEL_MIC_LEN;
- }
-
- michael_mic(priv->tx_tfm_mic,
- priv->tkip_key[priv->tx_key].tx_mic,
- eh->h_dest, eh->h_source, 0 /* priority */,
- skb->data + ETH_HLEN, skb->len - ETH_HLEN, mic);
-
- /* Write the MIC */
- err = hermes_bap_pwrite(hw, USER_BAP, &mic_buf[0], len,
- txfid, HERMES_802_3_OFFSET + offset);
- if (err) {
- printk(KERN_ERR "%s: Error %d writing MIC to BAP\n",
- dev->name, err);
- goto busy;
- }
- }
-
- /* Finally, we actually initiate the send */
- netif_stop_queue(dev);
-
- err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL,
- txfid, NULL);
- if (err) {
- netif_start_queue(dev);
- if (net_ratelimit())
- printk(KERN_ERR "%s: Error %d transmitting packet\n",
- dev->name, err);
- goto busy;
- }
-
- dev->trans_start = jiffies;
- stats->tx_bytes += HERMES_802_3_OFFSET + skb->len;
- goto ok;
-
- drop:
- stats->tx_errors++;
- stats->tx_dropped++;
-
- ok:
- orinoco_unlock(priv, &flags);
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
-
- busy:
- if (err == -EIO)
- schedule_work(&priv->reset_work);
- orinoco_unlock(priv, &flags);
- return NETDEV_TX_BUSY;
-}
-
-static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- u16 fid = hermes_read_regn(hw, ALLOCFID);
-
- if (fid != priv->txfid) {
- if (fid != DUMMY_FID)
- printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n",
- dev->name, fid);
- return;
- }
-
- hermes_write_regn(hw, ALLOCFID, DUMMY_FID);
-}
-
-static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
-
- stats->tx_packets++;
-
- netif_wake_queue(dev);
-
- hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
-}
-
-static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
- u16 fid = hermes_read_regn(hw, TXCOMPLFID);
- u16 status;
- struct hermes_txexc_data hdr;
- int err = 0;
-
- if (fid == DUMMY_FID)
- return; /* Nothing's really happened */
-
- /* Read part of the frame header - we need status and addr1 */
- err = hermes_bap_pread(hw, IRQ_BAP, &hdr,
- sizeof(struct hermes_txexc_data),
- fid, 0);
-
- hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
- stats->tx_errors++;
-
- if (err) {
- printk(KERN_WARNING "%s: Unable to read descriptor on Tx error "
- "(FID=%04X error %d)\n",
- dev->name, fid, err);
- return;
- }
-
- DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name,
- err, fid);
-
- /* We produce a TXDROP event only for retry or lifetime
- * exceeded, because that's the only status that really mean
- * that this particular node went away.
- * Other errors means that *we* screwed up. - Jean II */
- status = le16_to_cpu(hdr.desc.status);
- if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) {
- union iwreq_data wrqu;
-
- /* Copy 802.11 dest address.
- * We use the 802.11 header because the frame may
- * not be 802.3 or may be mangled...
- * In Ad-Hoc mode, it will be the node address.
- * In managed mode, it will be most likely the AP addr
- * User space will figure out how to convert it to
- * whatever it needs (IP address or else).
- * - Jean II */
- memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN);
- wrqu.addr.sa_family = ARPHRD_ETHER;
-
- /* Send event to user space */
- wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL);
- }
-
- netif_wake_queue(dev);
-}
-
-static void orinoco_tx_timeout(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
- struct hermes *hw = &priv->hw;
-
- printk(KERN_WARNING "%s: Tx timeout! "
- "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n",
- dev->name, hermes_read_regn(hw, ALLOCFID),
- hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT));
-
- stats->tx_errors++;
-
- schedule_work(&priv->reset_work);
-}
-
-/********************************************************************/
-/* Rx path (data frames) */
-/********************************************************************/
-
-/* Does the frame have a SNAP header indicating it should be
- * de-encapsulated to Ethernet-II? */
-static inline int is_ethersnap(void *_hdr)
-{
- u8 *hdr = _hdr;
-
- /* We de-encapsulate all packets which, a) have SNAP headers
- * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header
- * and where b) the OUI of the SNAP header is 00:00:00 or
- * 00:00:f8 - we need both because different APs appear to use
- * different OUIs for some reason */
- return (memcmp(hdr, &encaps_hdr, 5) == 0)
- && ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) );
-}
-
-static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac,
- int level, int noise)
-{
- struct iw_quality wstats;
- wstats.level = level - 0x95;
- wstats.noise = noise - 0x95;
- wstats.qual = (level > noise) ? (level - noise) : 0;
- wstats.updated = 7;
- /* Update spy records */
- wireless_spy_update(dev, mac, &wstats);
-}
-
-static void orinoco_stat_gather(struct net_device *dev,
- struct sk_buff *skb,
- struct hermes_rx_descriptor *desc)
-{
- struct orinoco_private *priv = netdev_priv(dev);
-
- /* Using spy support with lots of Rx packets, like in an
- * infrastructure (AP), will really slow down everything, because
- * the MAC address must be compared to each entry of the spy list.
- * If the user really asks for it (set some address in the
- * spy list), we do it, but he will pay the price.
- * Note that to get here, you need both WIRELESS_SPY
- * compiled in AND some addresses in the list !!!
- */
- /* Note : gcc will optimise the whole section away if
- * WIRELESS_SPY is not defined... - Jean II */
- if (SPY_NUMBER(priv)) {
- orinoco_spy_gather(dev, skb_mac_header(skb) + ETH_ALEN,
- desc->signal, desc->silence);
- }
-}
-
-/*
- * orinoco_rx_monitor - handle received monitor frames.
- *
- * Arguments:
- * dev network device
- * rxfid received FID
- * desc rx descriptor of the frame
- *
- * Call context: interrupt
- */
-static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
- struct hermes_rx_descriptor *desc)
-{
- u32 hdrlen = 30; /* return full header by default */
- u32 datalen = 0;
- u16 fc;
- int err;
- int len;
- struct sk_buff *skb;
- struct orinoco_private *priv = netdev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
- hermes_t *hw = &priv->hw;
-
- len = le16_to_cpu(desc->data_len);
-
- /* Determine the size of the header and the data */
- fc = le16_to_cpu(desc->frame_ctl);
- switch (fc & IEEE80211_FCTL_FTYPE) {
- case IEEE80211_FTYPE_DATA:
- if ((fc & IEEE80211_FCTL_TODS)
- && (fc & IEEE80211_FCTL_FROMDS))
- hdrlen = 30;
- else
- hdrlen = 24;
- datalen = len;
- break;
- case IEEE80211_FTYPE_MGMT:
- hdrlen = 24;
- datalen = len;
- break;
- case IEEE80211_FTYPE_CTL:
- switch (fc & IEEE80211_FCTL_STYPE) {
- case IEEE80211_STYPE_PSPOLL:
- case IEEE80211_STYPE_RTS:
- case IEEE80211_STYPE_CFEND:
- case IEEE80211_STYPE_CFENDACK:
- hdrlen = 16;
- break;
- case IEEE80211_STYPE_CTS:
- case IEEE80211_STYPE_ACK:
- hdrlen = 10;
- break;
- }
- break;
- default:
- /* Unknown frame type */
- break;
- }
-
- /* sanity check the length */
- if (datalen > IEEE80211_MAX_DATA_LEN + 12) {
- printk(KERN_DEBUG "%s: oversized monitor frame, "
- "data length = %d\n", dev->name, datalen);
- stats->rx_length_errors++;
- goto update_stats;
- }
-
- skb = dev_alloc_skb(hdrlen + datalen);
- if (!skb) {
- printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n",
- dev->name);
- goto update_stats;
- }
-
- /* Copy the 802.11 header to the skb */
- memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen);
- skb_reset_mac_header(skb);
-
- /* If any, copy the data from the card to the skb */
- if (datalen > 0) {
- err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen),
- ALIGN(datalen, 2), rxfid,
- HERMES_802_2_OFFSET);
- if (err) {
- printk(KERN_ERR "%s: error %d reading monitor frame\n",
- dev->name, err);
- goto drop;
- }
- }
-
- skb->dev = dev;
- skb->ip_summed = CHECKSUM_NONE;
- skb->pkt_type = PACKET_OTHERHOST;
- skb->protocol = __constant_htons(ETH_P_802_2);
-
- stats->rx_packets++;
- stats->rx_bytes += skb->len;
-
- netif_rx(skb);
- return;
-
- drop:
- dev_kfree_skb_irq(skb);
- update_stats:
- stats->rx_errors++;
- stats->rx_dropped++;
-}
-
-/* Get tsc from the firmware */
-static int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key,
- u8 *tsc)
-{
- hermes_t *hw = &priv->hw;
- int err = 0;
- u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE];
-
- if ((key < 0) || (key > 4))
- return -EINVAL;
-
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV,
- sizeof(tsc_arr), NULL, &tsc_arr);
- if (!err)
- memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0]));
-
- return err;
-}
-
-static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
- struct iw_statistics *wstats = &priv->wstats;
- struct sk_buff *skb = NULL;
- u16 rxfid, status;
- int length;
- struct hermes_rx_descriptor *desc;
- struct orinoco_rx_data *rx_data;
- int err;
-
- desc = kmalloc(sizeof(*desc), GFP_ATOMIC);
- if (!desc) {
- printk(KERN_WARNING
- "%s: Can't allocate space for RX descriptor\n",
- dev->name);
- goto update_stats;
- }
-
- rxfid = hermes_read_regn(hw, RXFID);
-
- err = hermes_bap_pread(hw, IRQ_BAP, desc, sizeof(*desc),
- rxfid, 0);
- if (err) {
- printk(KERN_ERR "%s: error %d reading Rx descriptor. "
- "Frame dropped.\n", dev->name, err);
- goto update_stats;
- }
-
- status = le16_to_cpu(desc->status);
-
- if (status & HERMES_RXSTAT_BADCRC) {
- DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n",
- dev->name);
- stats->rx_crc_errors++;
- goto update_stats;
- }
-
- /* Handle frames in monitor mode */
- if (priv->iw_mode == IW_MODE_MONITOR) {
- orinoco_rx_monitor(dev, rxfid, desc);
- goto out;
- }
-
- if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
- DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
- dev->name);
- wstats->discard.code++;
- goto update_stats;
- }
-
- length = le16_to_cpu(desc->data_len);
-
- /* Sanity checks */
- if (length < 3) { /* No for even an 802.2 LLC header */
- /* At least on Symbol firmware with PCF we get quite a
- lot of these legitimately - Poll frames with no
- data. */
- goto out;
- }
- if (length > IEEE80211_MAX_DATA_LEN) {
- printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
- dev->name, length);
- stats->rx_length_errors++;
- goto update_stats;
- }
-
- /* Payload size does not include Michael MIC. Increase payload
- * size to read it together with the data. */
- if (status & HERMES_RXSTAT_MIC)
- length += MICHAEL_MIC_LEN;
-
- /* We need space for the packet data itself, plus an ethernet
- header, plus 2 bytes so we can align the IP header on a
- 32bit boundary, plus 1 byte so we can read in odd length
- packets from the card, which has an IO granularity of 16
- bits */
- skb = dev_alloc_skb(length+ETH_HLEN+2+1);
- if (!skb) {
- printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
- dev->name);
- goto update_stats;
- }
-
- /* We'll prepend the header, so reserve space for it. The worst
- case is no decapsulation, when 802.3 header is prepended and
- nothing is removed. 2 is for aligning the IP header. */
- skb_reserve(skb, ETH_HLEN + 2);
-
- err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length),
- ALIGN(length, 2), rxfid,
- HERMES_802_2_OFFSET);
- if (err) {
- printk(KERN_ERR "%s: error %d reading frame. "
- "Frame dropped.\n", dev->name, err);
- goto drop;
- }
-
- /* Add desc and skb to rx queue */
- rx_data = kzalloc(sizeof(*rx_data), GFP_ATOMIC);
- if (!rx_data) {
- printk(KERN_WARNING "%s: Can't allocate RX packet\n",
- dev->name);
- goto drop;
- }
- rx_data->desc = desc;
- rx_data->skb = skb;
- list_add_tail(&rx_data->list, &priv->rx_list);
- tasklet_schedule(&priv->rx_tasklet);
-
- return;
-
-drop:
- dev_kfree_skb_irq(skb);
-update_stats:
- stats->rx_errors++;
- stats->rx_dropped++;
-out:
- kfree(desc);
-}
-
-static void orinoco_rx(struct net_device *dev,
- struct hermes_rx_descriptor *desc,
- struct sk_buff *skb)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
- u16 status, fc;
- int length;
- struct ethhdr *hdr;
-
- status = le16_to_cpu(desc->status);
- length = le16_to_cpu(desc->data_len);
- fc = le16_to_cpu(desc->frame_ctl);
-
- /* Calculate and check MIC */
- if (status & HERMES_RXSTAT_MIC) {
- int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >>
- HERMES_MIC_KEY_ID_SHIFT);
- u8 mic[MICHAEL_MIC_LEN];
- u8 *rxmic;
- u8 *src = (fc & IEEE80211_FCTL_FROMDS) ?
- desc->addr3 : desc->addr2;
-
- /* Extract Michael MIC from payload */
- rxmic = skb->data + skb->len - MICHAEL_MIC_LEN;
-
- skb_trim(skb, skb->len - MICHAEL_MIC_LEN);
- length -= MICHAEL_MIC_LEN;
-
- michael_mic(priv->rx_tfm_mic,
- priv->tkip_key[key_id].rx_mic,
- desc->addr1,
- src,
- 0, /* priority or QoS? */
- skb->data,
- skb->len,
- &mic[0]);
-
- if (memcmp(mic, rxmic,
- MICHAEL_MIC_LEN)) {
- union iwreq_data wrqu;
- struct iw_michaelmicfailure wxmic;
-
- printk(KERN_WARNING "%s: "
- "Invalid Michael MIC in data frame from %pM, "
- "using key %i\n",
- dev->name, src, key_id);
-
- /* TODO: update stats */
-
- /* Notify userspace */
- memset(&wxmic, 0, sizeof(wxmic));
- wxmic.flags = key_id & IW_MICFAILURE_KEY_ID;
- wxmic.flags |= (desc->addr1[0] & 1) ?
- IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE;
- wxmic.src_addr.sa_family = ARPHRD_ETHER;
- memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN);
-
- (void) orinoco_hw_get_tkip_iv(priv, key_id,
- &wxmic.tsc[0]);
-
- memset(&wrqu, 0, sizeof(wrqu));
- wrqu.data.length = sizeof(wxmic);
- wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu,
- (char *) &wxmic);
-
- goto drop;
- }
- }
-
- /* Handle decapsulation
- * In most cases, the firmware tell us about SNAP frames.
- * For some reason, the SNAP frames sent by LinkSys APs
- * are not properly recognised by most firmwares.
- * So, check ourselves */
- if (length >= ENCAPS_OVERHEAD &&
- (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
- ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
- is_ethersnap(skb->data))) {
- /* These indicate a SNAP within 802.2 LLC within
- 802.11 frame which we'll need to de-encapsulate to
- the original EthernetII frame. */
- hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD);
- } else {
- /* 802.3 frame - prepend 802.3 header as is */
- hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN);
- hdr->h_proto = htons(length);
- }
- memcpy(hdr->h_dest, desc->addr1, ETH_ALEN);
- if (fc & IEEE80211_FCTL_FROMDS)
- memcpy(hdr->h_source, desc->addr3, ETH_ALEN);
- else
- memcpy(hdr->h_source, desc->addr2, ETH_ALEN);
-
- skb->protocol = eth_type_trans(skb, dev);
- skb->ip_summed = CHECKSUM_NONE;
- if (fc & IEEE80211_FCTL_TODS)
- skb->pkt_type = PACKET_OTHERHOST;
-
- /* Process the wireless stats if needed */
- orinoco_stat_gather(dev, skb, desc);
-
- /* Pass the packet to the networking stack */
- netif_rx(skb);
- stats->rx_packets++;
- stats->rx_bytes += length;
-
- return;
-
- drop:
- dev_kfree_skb(skb);
- stats->rx_errors++;
- stats->rx_dropped++;
-}
-
-static void orinoco_rx_isr_tasklet(unsigned long data)
-{
- struct net_device *dev = (struct net_device *) data;
- struct orinoco_private *priv = netdev_priv(dev);
- struct orinoco_rx_data *rx_data, *temp;
- struct hermes_rx_descriptor *desc;
- struct sk_buff *skb;
-
- /* extract desc and skb from queue */
- list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
- desc = rx_data->desc;
- skb = rx_data->skb;
- list_del(&rx_data->list);
- kfree(rx_data);
-
- orinoco_rx(dev, desc, skb);
-
- kfree(desc);
- }
-}
-
-/********************************************************************/
-/* Rx path (info frames) */
-/********************************************************************/
-
-static void print_linkstatus(struct net_device *dev, u16 status)
-{
- char * s;
-
- if (suppress_linkstatus)
- return;
-
- switch (status) {
- case HERMES_LINKSTATUS_NOT_CONNECTED:
- s = "Not Connected";
- break;
- case HERMES_LINKSTATUS_CONNECTED:
- s = "Connected";
- break;
- case HERMES_LINKSTATUS_DISCONNECTED:
- s = "Disconnected";
- break;
- case HERMES_LINKSTATUS_AP_CHANGE:
- s = "AP Changed";
- break;
- case HERMES_LINKSTATUS_AP_OUT_OF_RANGE:
- s = "AP Out of Range";
- break;
- case HERMES_LINKSTATUS_AP_IN_RANGE:
- s = "AP In Range";
- break;
- case HERMES_LINKSTATUS_ASSOC_FAILED:
- s = "Association Failed";
- break;
- default:
- s = "UNKNOWN";
- }
-
- printk(KERN_INFO "%s: New link status: %s (%04x)\n",
- dev->name, s, status);
-}
-
-/* Search scan results for requested BSSID, join it if found */
-static void orinoco_join_ap(struct work_struct *work)
-{
- struct orinoco_private *priv =
- container_of(work, struct orinoco_private, join_work);
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- int err;
- unsigned long flags;
- struct join_req {
- u8 bssid[ETH_ALEN];
- __le16 channel;
- } __attribute__ ((packed)) req;
- const int atom_len = offsetof(struct prism2_scan_apinfo, atim);
- struct prism2_scan_apinfo *atom = NULL;
- int offset = 4;
- int found = 0;
- u8 *buf;
- u16 len;
-
- /* Allocate buffer for scan results */
- buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL);
- if (! buf)
- return;
-
- if (orinoco_lock(priv, &flags) != 0)
- goto fail_lock;
-
- /* Sanity checks in case user changed something in the meantime */
- if (! priv->bssid_fixed)
- goto out;
-
- if (strlen(priv->desired_essid) == 0)
- goto out;
-
- /* Read scan results from the firmware */
- err = hermes_read_ltv(hw, USER_BAP,
- HERMES_RID_SCANRESULTSTABLE,
- MAX_SCAN_LEN, &len, buf);
- if (err) {
- printk(KERN_ERR "%s: Cannot read scan results\n",
- dev->name);
- goto out;
- }
-
- len = HERMES_RECLEN_TO_BYTES(len);
-
- /* Go through the scan results looking for the channel of the AP
- * we were requested to join */
- for (; offset + atom_len <= len; offset += atom_len) {
- atom = (struct prism2_scan_apinfo *) (buf + offset);
- if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) {
- found = 1;
- break;
- }
- }
-
- if (! found) {
- DEBUG(1, "%s: Requested AP not found in scan results\n",
- dev->name);
- goto out;
- }
-
- memcpy(req.bssid, priv->desired_bssid, ETH_ALEN);
- req.channel = atom->channel; /* both are little-endian */
- err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST,
- &req);
- if (err)
- printk(KERN_ERR "%s: Error issuing join request\n", dev->name);
-
- out:
- orinoco_unlock(priv, &flags);
-
- fail_lock:
- kfree(buf);
-}
-
-/* Send new BSSID to userspace */
-static void orinoco_send_bssid_wevent(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- union iwreq_data wrqu;
- int err;
-
- err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID,
- ETH_ALEN, NULL, wrqu.ap_addr.sa_data);
- if (err != 0)
- return;
-
- wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-
- /* Send event to user space */
- wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
-}
-
-static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- union iwreq_data wrqu;
- int err;
- u8 buf[88];
- u8 *ie;
-
- if (!priv->has_wpa)
- return;
-
- err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO,
- sizeof(buf), NULL, &buf);
- if (err != 0)
- return;
-
- ie = orinoco_get_wpa_ie(buf, sizeof(buf));
- if (ie) {
- int rem = sizeof(buf) - (ie - &buf[0]);
- wrqu.data.length = ie[1] + 2;
- if (wrqu.data.length > rem)
- wrqu.data.length = rem;
-
- if (wrqu.data.length)
- /* Send event to user space */
- wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, ie);
- }
-}
-
-static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- union iwreq_data wrqu;
- int err;
- u8 buf[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */
- u8 *ie;
-
- if (!priv->has_wpa)
- return;
-
- err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENT_ASSOC_RESP_INFO,
- sizeof(buf), NULL, &buf);
- if (err != 0)
- return;
-
- ie = orinoco_get_wpa_ie(buf, sizeof(buf));
- if (ie) {
- int rem = sizeof(buf) - (ie - &buf[0]);
- wrqu.data.length = ie[1] + 2;
- if (wrqu.data.length > rem)
- wrqu.data.length = rem;
-
- if (wrqu.data.length)
- /* Send event to user space */
- wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, ie);
- }
-}
-
-static void orinoco_send_wevents(struct work_struct *work)
-{
- struct orinoco_private *priv =
- container_of(work, struct orinoco_private, wevent_work);
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return;
-
- orinoco_send_assocreqie_wevent(priv);
- orinoco_send_assocrespie_wevent(priv);
- orinoco_send_bssid_wevent(priv);
-
- orinoco_unlock(priv, &flags);
-}
-
-static inline void orinoco_clear_scan_results(struct orinoco_private *priv,
- unsigned long scan_age)
-{
- if (priv->has_ext_scan) {
- struct xbss_element *bss;
- struct xbss_element *tmp_bss;
-
- /* Blow away current list of scan results */
- list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) {
- if (!scan_age ||
- time_after(jiffies, bss->last_scanned + scan_age)) {
- list_move_tail(&bss->list,
- &priv->bss_free_list);
- /* Don't blow away ->list, just BSS data */
- memset(&bss->bss, 0, sizeof(bss->bss));
- bss->last_scanned = 0;
- }
- }
- } else {
- struct bss_element *bss;
- struct bss_element *tmp_bss;
-
- /* Blow away current list of scan results */
- list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) {
- if (!scan_age ||
- time_after(jiffies, bss->last_scanned + scan_age)) {
- list_move_tail(&bss->list,
- &priv->bss_free_list);
- /* Don't blow away ->list, just BSS data */
- memset(&bss->bss, 0, sizeof(bss->bss));
- bss->last_scanned = 0;
- }
- }
- }
-}
-
-static void orinoco_add_ext_scan_result(struct orinoco_private *priv,
- struct agere_ext_scan_info *atom)
-{
- struct xbss_element *bss = NULL;
- int found = 0;
-
- /* Try to update an existing bss first */
- list_for_each_entry(bss, &priv->bss_list, list) {
- if (compare_ether_addr(bss->bss.bssid, atom->bssid))
- continue;
- /* ESSID lengths */
- if (bss->bss.data[1] != atom->data[1])
- continue;
- if (memcmp(&bss->bss.data[2], &atom->data[2],
- atom->data[1]))
- continue;
- found = 1;
- break;
- }
-
- /* Grab a bss off the free list */
- if (!found && !list_empty(&priv->bss_free_list)) {
- bss = list_entry(priv->bss_free_list.next,
- struct xbss_element, list);
- list_del(priv->bss_free_list.next);
-
- list_add_tail(&bss->list, &priv->bss_list);
- }
-
- if (bss) {
- /* Always update the BSS to get latest beacon info */
- memcpy(&bss->bss, atom, sizeof(bss->bss));
- bss->last_scanned = jiffies;
- }
-}
-
-static int orinoco_process_scan_results(struct net_device *dev,
- unsigned char *buf,
- int len)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int offset; /* In the scan data */
- union hermes_scan_info *atom;
- int atom_len;
-
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE:
- atom_len = sizeof(struct agere_scan_apinfo);
- offset = 0;
- break;
- case FIRMWARE_TYPE_SYMBOL:
- /* Lack of documentation necessitates this hack.
- * Different firmwares have 68 or 76 byte long atoms.
- * We try modulo first. If the length divides by both,
- * we check what would be the channel in the second
- * frame for a 68-byte atom. 76-byte atoms have 0 there.
- * Valid channel cannot be 0. */
- if (len % 76)
- atom_len = 68;
- else if (len % 68)
- atom_len = 76;
- else if (len >= 1292 && buf[68] == 0)
- atom_len = 76;
- else
- atom_len = 68;
- offset = 0;
- break;
- case FIRMWARE_TYPE_INTERSIL:
- offset = 4;
- if (priv->has_hostscan) {
- atom_len = le16_to_cpup((__le16 *)buf);
- /* Sanity check for atom_len */
- if (atom_len < sizeof(struct prism2_scan_apinfo)) {
- printk(KERN_ERR "%s: Invalid atom_len in scan "
- "data: %d\n", dev->name, atom_len);
- return -EIO;
- }
- } else
- atom_len = offsetof(struct prism2_scan_apinfo, atim);
- break;
- default:
- return -EOPNOTSUPP;
- }
-
- /* Check that we got an whole number of atoms */
- if ((len - offset) % atom_len) {
- printk(KERN_ERR "%s: Unexpected scan data length %d, "
- "atom_len %d, offset %d\n", dev->name, len,
- atom_len, offset);
- return -EIO;
- }
-
- orinoco_clear_scan_results(priv, msecs_to_jiffies(15000));
-
- /* Read the entries one by one */
- for (; offset + atom_len <= len; offset += atom_len) {
- int found = 0;
- struct bss_element *bss = NULL;
-
- /* Get next atom */
- atom = (union hermes_scan_info *) (buf + offset);
-
- /* Try to update an existing bss first */
- list_for_each_entry(bss, &priv->bss_list, list) {
- if (compare_ether_addr(bss->bss.a.bssid, atom->a.bssid))
- continue;
- if (le16_to_cpu(bss->bss.a.essid_len) !=
- le16_to_cpu(atom->a.essid_len))
- continue;
- if (memcmp(bss->bss.a.essid, atom->a.essid,
- le16_to_cpu(atom->a.essid_len)))
- continue;
- found = 1;
- break;
- }
-
- /* Grab a bss off the free list */
- if (!found && !list_empty(&priv->bss_free_list)) {
- bss = list_entry(priv->bss_free_list.next,
- struct bss_element, list);
- list_del(priv->bss_free_list.next);
-
- list_add_tail(&bss->list, &priv->bss_list);
- }
-
- if (bss) {
- /* Always update the BSS to get latest beacon info */
- memcpy(&bss->bss, atom, sizeof(bss->bss));
- bss->last_scanned = jiffies;
- }
- }
-
- return 0;
-}
-
-static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- u16 infofid;
- struct {
- __le16 len;
- __le16 type;
- } __attribute__ ((packed)) info;
- int len, type;
- int err;
-
- /* This is an answer to an INQUIRE command that we did earlier,
- * or an information "event" generated by the card
- * The controller return to us a pseudo frame containing
- * the information in question - Jean II */
- infofid = hermes_read_regn(hw, INFOFID);
-
- /* Read the info frame header - don't try too hard */
- err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info),
- infofid, 0);
- if (err) {
- printk(KERN_ERR "%s: error %d reading info frame. "
- "Frame dropped.\n", dev->name, err);
- return;
- }
-
- len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len));
- type = le16_to_cpu(info.type);
-
- switch (type) {
- case HERMES_INQ_TALLIES: {
- struct hermes_tallies_frame tallies;
- struct iw_statistics *wstats = &priv->wstats;
-
- if (len > sizeof(tallies)) {
- printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n",
- dev->name, len);
- len = sizeof(tallies);
- }
-
- err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len,
- infofid, sizeof(info));
- if (err)
- break;
-
- /* Increment our various counters */
- /* wstats->discard.nwid - no wrong BSSID stuff */
- wstats->discard.code +=
- le16_to_cpu(tallies.RxWEPUndecryptable);
- if (len == sizeof(tallies))
- wstats->discard.code +=
- le16_to_cpu(tallies.RxDiscards_WEPICVError) +
- le16_to_cpu(tallies.RxDiscards_WEPExcluded);
- wstats->discard.misc +=
- le16_to_cpu(tallies.TxDiscardsWrongSA);
- wstats->discard.fragment +=
- le16_to_cpu(tallies.RxMsgInBadMsgFragments);
- wstats->discard.retries +=
- le16_to_cpu(tallies.TxRetryLimitExceeded);
- /* wstats->miss.beacon - no match */
- }
- break;
- case HERMES_INQ_LINKSTATUS: {
- struct hermes_linkstatus linkstatus;
- u16 newstatus;
- int connected;
-
- if (priv->iw_mode == IW_MODE_MONITOR)
- break;
-
- if (len != sizeof(linkstatus)) {
- printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n",
- dev->name, len);
- break;
- }
-
- err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len,
- infofid, sizeof(info));
- if (err)
- break;
- newstatus = le16_to_cpu(linkstatus.linkstatus);
-
- /* Symbol firmware uses "out of range" to signal that
- * the hostscan frame can be requested. */
- if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE &&
- priv->firmware_type == FIRMWARE_TYPE_SYMBOL &&
- priv->has_hostscan && priv->scan_inprogress) {
- hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL);
- break;
- }
-
- connected = (newstatus == HERMES_LINKSTATUS_CONNECTED)
- || (newstatus == HERMES_LINKSTATUS_AP_CHANGE)
- || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE);
-
- if (connected)
- netif_carrier_on(dev);
- else if (!ignore_disconnect)
- netif_carrier_off(dev);
-
- if (newstatus != priv->last_linkstatus) {
- priv->last_linkstatus = newstatus;
- print_linkstatus(dev, newstatus);
- /* The info frame contains only one word which is the
- * status (see hermes.h). The status is pretty boring
- * in itself, that's why we export the new BSSID...
- * Jean II */
- schedule_work(&priv->wevent_work);
- }
- }
- break;
- case HERMES_INQ_SCAN:
- if (!priv->scan_inprogress && priv->bssid_fixed &&
- priv->firmware_type == FIRMWARE_TYPE_INTERSIL) {
- schedule_work(&priv->join_work);
- break;
- }
- /* fall through */
- case HERMES_INQ_HOSTSCAN:
- case HERMES_INQ_HOSTSCAN_SYMBOL: {
- /* Result of a scanning. Contains information about
- * cells in the vicinity - Jean II */
- union iwreq_data wrqu;
- unsigned char *buf;
-
- /* Scan is no longer in progress */
- priv->scan_inprogress = 0;
-
- /* Sanity check */
- if (len > 4096) {
- printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n",
- dev->name, len);
- break;
- }
-
- /* Allocate buffer for results */
- buf = kmalloc(len, GFP_ATOMIC);
- if (buf == NULL)
- /* No memory, so can't printk()... */
- break;
-
- /* Read scan data */
- err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len,
- infofid, sizeof(info));
- if (err) {
- kfree(buf);
- break;
- }
-
-#ifdef ORINOCO_DEBUG
- {
- int i;
- printk(KERN_DEBUG "Scan result [%02X", buf[0]);
- for(i = 1; i < (len * 2); i++)
- printk(":%02X", buf[i]);
- printk("]\n");
- }
-#endif /* ORINOCO_DEBUG */
-
- if (orinoco_process_scan_results(dev, buf, len) == 0) {
- /* Send an empty event to user space.
- * We don't send the received data on the event because
- * it would require us to do complex transcoding, and
- * we want to minimise the work done in the irq handler
- * Use a request to extract the data - Jean II */
- wrqu.data.length = 0;
- wrqu.data.flags = 0;
- wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL);
- }
- kfree(buf);
- }
- break;
- case HERMES_INQ_CHANNELINFO:
- {
- struct agere_ext_scan_info *bss;
-
- if (!priv->scan_inprogress) {
- printk(KERN_DEBUG "%s: Got chaninfo without scan, "
- "len=%d\n", dev->name, len);
- break;
- }
-
- /* An empty result indicates that the scan is complete */
- if (len == 0) {
- union iwreq_data wrqu;
-
- /* Scan is no longer in progress */
- priv->scan_inprogress = 0;
-
- wrqu.data.length = 0;
- wrqu.data.flags = 0;
- wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL);
- break;
- }
-
- /* Sanity check */
- else if (len > sizeof(*bss)) {
- printk(KERN_WARNING
- "%s: Ext scan results too large (%d bytes). "
- "Truncating results to %zd bytes.\n",
- dev->name, len, sizeof(*bss));
- len = sizeof(*bss);
- } else if (len < (offsetof(struct agere_ext_scan_info,
- data) + 2)) {
- /* Drop this result now so we don't have to
- * keep checking later */
- printk(KERN_WARNING
- "%s: Ext scan results too short (%d bytes)\n",
- dev->name, len);
- break;
- }
-
- bss = kmalloc(sizeof(*bss), GFP_ATOMIC);
- if (bss == NULL)
- break;
-
- /* Read scan data */
- err = hermes_bap_pread(hw, IRQ_BAP, (void *) bss, len,
- infofid, sizeof(info));
- if (err) {
- kfree(bss);
- break;
- }
-
- orinoco_add_ext_scan_result(priv, bss);
-
- kfree(bss);
- break;
- }
- case HERMES_INQ_SEC_STAT_AGERE:
- /* Security status (Agere specific) */
- /* Ignore this frame for now */
- if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
- break;
- /* fall through */
- default:
- printk(KERN_DEBUG "%s: Unknown information frame received: "
- "type 0x%04x, length %d\n", dev->name, type, len);
- /* We don't actually do anything about it */
- break;
- }
-}
-
-static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw)
-{
- if (net_ratelimit())
- printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name);
-}
-
-/********************************************************************/
-/* Internal hardware control routines */
-/********************************************************************/
-
-int __orinoco_up(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct hermes *hw = &priv->hw;
- int err;
-
- netif_carrier_off(dev); /* just to make sure */
-
- err = __orinoco_program_rids(dev);
- if (err) {
- printk(KERN_ERR "%s: Error %d configuring card\n",
- dev->name, err);
- return err;
- }
-
- /* Fire things up again */
- hermes_set_irqmask(hw, ORINOCO_INTEN);
- err = hermes_enable_port(hw, 0);
- if (err) {
- printk(KERN_ERR "%s: Error %d enabling MAC port\n",
- dev->name, err);
- return err;
- }
-
- netif_start_queue(dev);
-
- return 0;
-}
-
-int __orinoco_down(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct hermes *hw = &priv->hw;
- int err;
-
- netif_stop_queue(dev);
-
- if (! priv->hw_unavailable) {
- if (! priv->broken_disableport) {
- err = hermes_disable_port(hw, 0);
- if (err) {
- /* Some firmwares (e.g. Intersil 1.3.x) seem
- * to have problems disabling the port, oh
- * well, too bad. */
- printk(KERN_WARNING "%s: Error %d disabling MAC port\n",
- dev->name, err);
- priv->broken_disableport = 1;
- }
- }
- hermes_set_irqmask(hw, 0);
- hermes_write_regn(hw, EVACK, 0xffff);
- }
-
- /* firmware will have to reassociate */
- netif_carrier_off(dev);
- priv->last_linkstatus = 0xffff;
-
- return 0;
-}
-
-static int orinoco_allocate_fid(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct hermes *hw = &priv->hw;
- int err;
-
- err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
- if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) {
- /* Try workaround for old Symbol firmware bug */
- printk(KERN_WARNING "%s: firmware ALLOC bug detected "
- "(old Symbol firmware?). Trying to work around... ",
- dev->name);
-
- priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
- err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
- if (err)
- printk("failed!\n");
- else
- printk("ok.\n");
- }
-
- return err;
-}
-
-int orinoco_reinit_firmware(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct hermes *hw = &priv->hw;
- int err;
-
- err = hermes_init(hw);
- if (priv->do_fw_download && !err) {
- err = orinoco_download(priv);
- if (err)
- priv->do_fw_download = 0;
- }
- if (!err)
- err = orinoco_allocate_fid(dev);
-
- return err;
-}
-
-static int __orinoco_hw_set_bitrate(struct orinoco_private *priv)
-{
- hermes_t *hw = &priv->hw;
- int err = 0;
-
- if (priv->bitratemode >= BITRATE_TABLE_SIZE) {
- printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n",
- priv->ndev->name, priv->bitratemode);
- return -EINVAL;
- }
-
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE:
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFTXRATECONTROL,
- bitrate_table[priv->bitratemode].agere_txratectrl);
- break;
- case FIRMWARE_TYPE_INTERSIL:
- case FIRMWARE_TYPE_SYMBOL:
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFTXRATECONTROL,
- bitrate_table[priv->bitratemode].intersil_txratectrl);
- break;
- default:
- BUG();
- }
-
- return err;
-}
-
-/* Set fixed AP address */
-static int __orinoco_hw_set_wap(struct orinoco_private *priv)
-{
- int roaming_flag;
- int err = 0;
- hermes_t *hw = &priv->hw;
-
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE:
- /* not supported */
- break;
- case FIRMWARE_TYPE_INTERSIL:
- if (priv->bssid_fixed)
- roaming_flag = 2;
- else
- roaming_flag = 1;
-
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFROAMINGMODE,
- roaming_flag);
- break;
- case FIRMWARE_TYPE_SYMBOL:
- err = HERMES_WRITE_RECORD(hw, USER_BAP,
- HERMES_RID_CNFMANDATORYBSSID_SYMBOL,
- &priv->desired_bssid);
- break;
- }
- return err;
-}
-
-/* Change the WEP keys and/or the current keys. Can be called
- * either from __orinoco_hw_setup_enc() or directly from
- * orinoco_ioctl_setiwencode(). In the later case the association
- * with the AP is not broken (if the firmware can handle it),
- * which is needed for 802.1x implementations. */
-static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv)
-{
- hermes_t *hw = &priv->hw;
- int err = 0;
-
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE:
- err = HERMES_WRITE_RECORD(hw, USER_BAP,
- HERMES_RID_CNFWEPKEYS_AGERE,
- &priv->keys);
- if (err)
- return err;
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFTXKEY_AGERE,
- priv->tx_key);
- if (err)
- return err;
- break;
- case FIRMWARE_TYPE_INTERSIL:
- case FIRMWARE_TYPE_SYMBOL:
- {
- int keylen;
- int i;
-
- /* Force uniform key length to work around firmware bugs */
- keylen = le16_to_cpu(priv->keys[priv->tx_key].len);
-
- if (keylen > LARGE_KEY_SIZE) {
- printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n",
- priv->ndev->name, priv->tx_key, keylen);
- return -E2BIG;
- }
-
- /* Write all 4 keys */
- for(i = 0; i < ORINOCO_MAX_KEYS; i++) {
- err = hermes_write_ltv(hw, USER_BAP,
- HERMES_RID_CNFDEFAULTKEY0 + i,
- HERMES_BYTES_TO_RECLEN(keylen),
- priv->keys[i].data);
- if (err)
- return err;
- }
-
- /* Write the index of the key used in transmission */
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFWEPDEFAULTKEYID,
- priv->tx_key);
- if (err)
- return err;
- }
- break;
- }
-
- return 0;
-}
-
-static int __orinoco_hw_setup_enc(struct orinoco_private *priv)
-{
- hermes_t *hw = &priv->hw;
- int err = 0;
- int master_wep_flag;
- int auth_flag;
- int enc_flag;
-
- /* Setup WEP keys for WEP and WPA */
- if (priv->encode_alg)
- __orinoco_hw_setup_wepkeys(priv);
-
- if (priv->wep_restrict)
- auth_flag = HERMES_AUTH_SHARED_KEY;
- else
- auth_flag = HERMES_AUTH_OPEN;
-
- if (priv->wpa_enabled)
- enc_flag = 2;
- else if (priv->encode_alg == IW_ENCODE_ALG_WEP)
- enc_flag = 1;
- else
- enc_flag = 0;
-
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE: /* Agere style WEP */
- if (priv->encode_alg == IW_ENCODE_ALG_WEP) {
- /* Enable the shared-key authentication. */
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFAUTHENTICATION_AGERE,
- auth_flag);
- }
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFWEPENABLED_AGERE,
- enc_flag);
- if (err)
- return err;
-
- if (priv->has_wpa) {
- /* Set WPA key management */
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE,
- priv->key_mgmt);
- if (err)
- return err;
- }
-
- break;
-
- case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */
- case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */
- if (priv->encode_alg == IW_ENCODE_ALG_WEP) {
- if (priv->wep_restrict ||
- (priv->firmware_type == FIRMWARE_TYPE_SYMBOL))
- master_wep_flag = HERMES_WEP_PRIVACY_INVOKED |
- HERMES_WEP_EXCL_UNENCRYPTED;
- else
- master_wep_flag = HERMES_WEP_PRIVACY_INVOKED;
-
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFAUTHENTICATION,
- auth_flag);
- if (err)
- return err;
- } else
- master_wep_flag = 0;
-
- if (priv->iw_mode == IW_MODE_MONITOR)
- master_wep_flag |= HERMES_WEP_HOST_DECRYPT;
-
- /* Master WEP setting : on/off */
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFWEPFLAGS_INTERSIL,
- master_wep_flag);
- if (err)
- return err;
-
- break;
- }
-
- return 0;
-}
-
-/* key must be 32 bytes, including the tx and rx MIC keys.
- * rsc must be 8 bytes
- * tsc must be 8 bytes or NULL
- */
-static int __orinoco_hw_set_tkip_key(hermes_t *hw, int key_idx, int set_tx,
- u8 *key, u8 *rsc, u8 *tsc)
-{
- struct {
- __le16 idx;
- u8 rsc[IW_ENCODE_SEQ_MAX_SIZE];
- u8 key[TKIP_KEYLEN];
- u8 tx_mic[MIC_KEYLEN];
- u8 rx_mic[MIC_KEYLEN];
- u8 tsc[IW_ENCODE_SEQ_MAX_SIZE];
- } __attribute__ ((packed)) buf;
- int ret;
- int err;
- int k;
- u16 xmitting;
-
- key_idx &= 0x3;
-
- if (set_tx)
- key_idx |= 0x8000;
-
- buf.idx = cpu_to_le16(key_idx);
- memcpy(buf.key, key,
- sizeof(buf.key) + sizeof(buf.tx_mic) + sizeof(buf.rx_mic));
-
- if (rsc == NULL)
- memset(buf.rsc, 0, sizeof(buf.rsc));
- else
- memcpy(buf.rsc, rsc, sizeof(buf.rsc));
-
- if (tsc == NULL) {
- memset(buf.tsc, 0, sizeof(buf.tsc));
- buf.tsc[4] = 0x10;
- } else {
- memcpy(buf.tsc, tsc, sizeof(buf.tsc));
- }
-
- /* Wait upto 100ms for tx queue to empty */
- k = 100;
- do {
- k--;
- udelay(1000);
- ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY,
- &xmitting);
- if (ret)
- break;
- } while ((k > 0) && xmitting);
-
- if (k == 0)
- ret = -ETIMEDOUT;
-
- err = HERMES_WRITE_RECORD(hw, USER_BAP,
- HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE,
- &buf);
-
- return ret ? ret : err;
-}
-
-static int orinoco_clear_tkip_key(struct orinoco_private *priv,
- int key_idx)
-{
- hermes_t *hw = &priv->hw;
- int err;
-
- memset(&priv->tkip_key[key_idx], 0, sizeof(priv->tkip_key[key_idx]));
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE,
- key_idx);
- if (err)
- printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n",
- priv->ndev->name, err, key_idx);
- return err;
-}
-
-static int __orinoco_program_rids(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- int err;
- struct hermes_idstring idbuf;
-
- /* Set the MAC address */
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
- HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting MAC address\n",
- dev->name, err);
- return err;
- }
-
- /* Set up the link mode */
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE,
- priv->port_type);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting port type\n",
- dev->name, err);
- return err;
- }
- /* Set the channel/frequency */
- if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFOWNCHANNEL,
- priv->channel);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting channel %d\n",
- dev->name, err, priv->channel);
- return err;
- }
- }
-
- if (priv->has_ibss) {
- u16 createibss;
-
- if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) {
- printk(KERN_WARNING "%s: This firmware requires an "
- "ESSID in IBSS-Ad-Hoc mode.\n", dev->name);
- /* With wvlan_cs, in this case, we would crash.
- * hopefully, this driver will behave better...
- * Jean II */
- createibss = 0;
- } else {
- createibss = priv->createibss;
- }
-
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFCREATEIBSS,
- createibss);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n",
- dev->name, err);
- return err;
- }
- }
-
- /* Set the desired BSSID */
- err = __orinoco_hw_set_wap(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting AP address\n",
- dev->name, err);
- return err;
- }
- /* Set the desired ESSID */
- idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
- memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
- /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
- HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
- &idbuf);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting OWNSSID\n",
- dev->name, err);
- return err;
- }
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
- HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
- &idbuf);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n",
- dev->name, err);
- return err;
- }
-
- /* Set the station name */
- idbuf.len = cpu_to_le16(strlen(priv->nick));
- memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
- HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
- &idbuf);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting nickname\n",
- dev->name, err);
- return err;
- }
-
- /* Set AP density */
- if (priv->has_sensitivity) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFSYSTEMSCALE,
- priv->ap_density);
- if (err) {
- printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. "
- "Disabling sensitivity control\n",
- dev->name, err);
-
- priv->has_sensitivity = 0;
- }
- }
-
- /* Set RTS threshold */
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
- priv->rts_thresh);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting RTS threshold\n",
- dev->name, err);
- return err;
- }
-
- /* Set fragmentation threshold or MWO robustness */
- if (priv->has_mwo)
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMWOROBUST_AGERE,
- priv->mwo_robust);
- else
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
- priv->frag_thresh);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting fragmentation\n",
- dev->name, err);
- return err;
- }
-
- /* Set bitrate */
- err = __orinoco_hw_set_bitrate(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting bitrate\n",
- dev->name, err);
- return err;
- }
-
- /* Set power management */
- if (priv->has_pm) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPMENABLED,
- priv->pm_on);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
-
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMULTICASTRECEIVE,
- priv->pm_mcast);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMAXSLEEPDURATION,
- priv->pm_period);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPMHOLDOVERDURATION,
- priv->pm_timeout);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
- }
-
- /* Set preamble - only for Symbol so far... */
- if (priv->has_preamble) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPREAMBLE_SYMBOL,
- priv->preamble);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting preamble\n",
- dev->name, err);
- return err;
- }
- }
-
- /* Set up encryption */
- if (priv->has_wep || priv->has_wpa) {
- err = __orinoco_hw_setup_enc(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d activating encryption\n",
- dev->name, err);
- return err;
- }
- }
-
- if (priv->iw_mode == IW_MODE_MONITOR) {
- /* Enable monitor mode */
- dev->type = ARPHRD_IEEE80211;
- err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
- HERMES_TEST_MONITOR, 0, NULL);
- } else {
- /* Disable monitor mode */
- dev->type = ARPHRD_ETHER;
- err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
- HERMES_TEST_STOP, 0, NULL);
- }
- if (err)
- return err;
-
- /* Set promiscuity / multicast*/
- priv->promiscuous = 0;
- priv->mc_count = 0;
-
- /* FIXME: what about netif_tx_lock */
- __orinoco_set_multicast_list(dev);
-
- return 0;
-}
-
-/* FIXME: return int? */
-static void
-__orinoco_set_multicast_list(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- int err = 0;
- int promisc, mc_count;
-
- /* The Hermes doesn't seem to have an allmulti mode, so we go
- * into promiscuous mode and let the upper levels deal. */
- if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
- (dev->mc_count > MAX_MULTICAST(priv)) ) {
- promisc = 1;
- mc_count = 0;
- } else {
- promisc = 0;
- mc_count = dev->mc_count;
- }
-
- if (promisc != priv->promiscuous) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPROMISCUOUSMODE,
- promisc);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n",
- dev->name, err);
- } else
- priv->promiscuous = promisc;
- }
-
- /* If we're not in promiscuous mode, then we need to set the
- * group address if either we want to multicast, or if we were
- * multicasting and want to stop */
- if (! promisc && (mc_count || priv->mc_count) ) {
- struct dev_mc_list *p = dev->mc_list;
- struct hermes_multicast mclist;
- int i;
-
- for (i = 0; i < mc_count; i++) {
- /* paranoia: is list shorter than mc_count? */
- BUG_ON(! p);
- /* paranoia: bad address size in list? */
- BUG_ON(p->dmi_addrlen != ETH_ALEN);
-
- memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN);
- p = p->next;
- }
-
- if (p)
- printk(KERN_WARNING "%s: Multicast list is "
- "longer than mc_count\n", dev->name);
-
- err = hermes_write_ltv(hw, USER_BAP,
- HERMES_RID_CNFGROUPADDRESSES,
- HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN),
- &mclist);
- if (err)
- printk(KERN_ERR "%s: Error %d setting multicast list.\n",
- dev->name, err);
- else
- priv->mc_count = mc_count;
- }
-}
-
-/* This must be called from user context, without locks held - use
- * schedule_work() */
-static void orinoco_reset(struct work_struct *work)
-{
- struct orinoco_private *priv =
- container_of(work, struct orinoco_private, reset_work);
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- int err;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- /* When the hardware becomes available again, whatever
- * detects that is responsible for re-initializing
- * it. So no need for anything further */
- return;
-
- netif_stop_queue(dev);
-
- /* Shut off interrupts. Depending on what state the hardware
- * is in, this might not work, but we'll try anyway */
- hermes_set_irqmask(hw, 0);
- hermes_write_regn(hw, EVACK, 0xffff);
-
- priv->hw_unavailable++;
- priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */
- netif_carrier_off(dev);
-
- orinoco_unlock(priv, &flags);
-
- /* Scanning support: Cleanup of driver struct */
- orinoco_clear_scan_results(priv, 0);
- priv->scan_inprogress = 0;
-
- if (priv->hard_reset) {
- err = (*priv->hard_reset)(priv);
- if (err) {
- printk(KERN_ERR "%s: orinoco_reset: Error %d "
- "performing hard reset\n", dev->name, err);
- goto disable;
- }
- }
-
- err = orinoco_reinit_firmware(dev);
- if (err) {
- printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
- dev->name, err);
- goto disable;
- }
-
- spin_lock_irq(&priv->lock); /* This has to be called from user context */
-
- priv->hw_unavailable--;
-
- /* priv->open or priv->hw_unavailable might have changed while
- * we dropped the lock */
- if (priv->open && (! priv->hw_unavailable)) {
- err = __orinoco_up(dev);
- if (err) {
- printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n",
- dev->name, err);
- } else
- dev->trans_start = jiffies;
- }
-
- spin_unlock_irq(&priv->lock);
-
- return;
- disable:
- hermes_set_irqmask(hw, 0);
- netif_device_detach(dev);
- printk(KERN_ERR "%s: Device has been disabled!\n", dev->name);
-}
-
-/********************************************************************/
-/* Interrupt handler */
-/********************************************************************/
-
-static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw)
-{
- printk(KERN_DEBUG "%s: TICK\n", dev->name);
-}
-
-static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw)
-{
- /* This seems to happen a fair bit under load, but ignoring it
- seems to work fine...*/
- printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n",
- dev->name);
-}
-
-irqreturn_t orinoco_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- int count = MAX_IRQLOOPS_PER_IRQ;
- u16 evstat, events;
- /* These are used to detect a runaway interrupt situation */
- /* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy,
- * we panic and shut down the hardware */
- static int last_irq_jiffy = 0; /* jiffies value the last time
- * we were called */
- static int loops_this_jiffy = 0;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0) {
- /* If hw is unavailable - we don't know if the irq was
- * for us or not */
- return IRQ_HANDLED;
- }
-
- evstat = hermes_read_regn(hw, EVSTAT);
- events = evstat & hw->inten;
- if (! events) {
- orinoco_unlock(priv, &flags);
- return IRQ_NONE;
- }
-
- if (jiffies != last_irq_jiffy)
- loops_this_jiffy = 0;
- last_irq_jiffy = jiffies;
-
- while (events && count--) {
- if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) {
- printk(KERN_WARNING "%s: IRQ handler is looping too "
- "much! Resetting.\n", dev->name);
- /* Disable interrupts for now */
- hermes_set_irqmask(hw, 0);
- schedule_work(&priv->reset_work);
- break;
- }
-
- /* Check the card hasn't been removed */
- if (! hermes_present(hw)) {
- DEBUG(0, "orinoco_interrupt(): card removed\n");
- break;
- }
-
- if (events & HERMES_EV_TICK)
- __orinoco_ev_tick(dev, hw);
- if (events & HERMES_EV_WTERR)
- __orinoco_ev_wterr(dev, hw);
- if (events & HERMES_EV_INFDROP)
- __orinoco_ev_infdrop(dev, hw);
- if (events & HERMES_EV_INFO)
- __orinoco_ev_info(dev, hw);
- if (events & HERMES_EV_RX)
- __orinoco_ev_rx(dev, hw);
- if (events & HERMES_EV_TXEXC)
- __orinoco_ev_txexc(dev, hw);
- if (events & HERMES_EV_TX)
- __orinoco_ev_tx(dev, hw);
- if (events & HERMES_EV_ALLOC)
- __orinoco_ev_alloc(dev, hw);
-
- hermes_write_regn(hw, EVACK, evstat);
-
- evstat = hermes_read_regn(hw, EVSTAT);
- events = evstat & hw->inten;
- };
-
- orinoco_unlock(priv, &flags);
- return IRQ_HANDLED;
-}
-
-/********************************************************************/
-/* Initialization */
-/********************************************************************/
-
-struct comp_id {
- u16 id, variant, major, minor;
-} __attribute__ ((packed));
-
-static inline fwtype_t determine_firmware_type(struct comp_id *nic_id)
-{
- if (nic_id->id < 0x8000)
- return FIRMWARE_TYPE_AGERE;
- else if (nic_id->id == 0x8000 && nic_id->major == 0)
- return FIRMWARE_TYPE_SYMBOL;
- else
- return FIRMWARE_TYPE_INTERSIL;
-}
-
-/* Set priv->firmware type, determine firmware properties */
-static int determine_firmware(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- int err;
- struct comp_id nic_id, sta_id;
- unsigned int firmver;
- char tmp[SYMBOL_MAX_VER_LEN+1] __attribute__((aligned(2)));
-
- /* Get the hardware version */
- err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id);
- if (err) {
- printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n",
- dev->name, err);
- return err;
- }
-
- le16_to_cpus(&nic_id.id);
- le16_to_cpus(&nic_id.variant);
- le16_to_cpus(&nic_id.major);
- le16_to_cpus(&nic_id.minor);
- printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n",
- dev->name, nic_id.id, nic_id.variant,
- nic_id.major, nic_id.minor);
-
- priv->firmware_type = determine_firmware_type(&nic_id);
-
- /* Get the firmware version */
- err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id);
- if (err) {
- printk(KERN_ERR "%s: Cannot read station identity: error %d\n",
- dev->name, err);
- return err;
- }
-
- le16_to_cpus(&sta_id.id);
- le16_to_cpus(&sta_id.variant);
- le16_to_cpus(&sta_id.major);
- le16_to_cpus(&sta_id.minor);
- printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n",
- dev->name, sta_id.id, sta_id.variant,
- sta_id.major, sta_id.minor);
-
- switch (sta_id.id) {
- case 0x15:
- printk(KERN_ERR "%s: Primary firmware is active\n",
- dev->name);
- return -ENODEV;
- case 0x14b:
- printk(KERN_ERR "%s: Tertiary firmware is active\n",
- dev->name);
- return -ENODEV;
- case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */
- case 0x21: /* Symbol Spectrum24 Trilogy */
- break;
- default:
- printk(KERN_NOTICE "%s: Unknown station ID, please report\n",
- dev->name);
- break;
- }
-
- /* Default capabilities */
- priv->has_sensitivity = 1;
- priv->has_mwo = 0;
- priv->has_preamble = 0;
- priv->has_port3 = 1;
- priv->has_ibss = 1;
- priv->has_wep = 0;
- priv->has_big_wep = 0;
- priv->has_alt_txcntl = 0;
- priv->has_ext_scan = 0;
- priv->has_wpa = 0;
- priv->do_fw_download = 0;
-
- /* Determine capabilities from the firmware version */
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE:
- /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout,
- ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */
- snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
- "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor);
-
- firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor;
-
- priv->has_ibss = (firmver >= 0x60006);
- priv->has_wep = (firmver >= 0x40020);
- priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell
- Gold cards from the others? */
- priv->has_mwo = (firmver >= 0x60000);
- priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */
- priv->ibss_port = 1;
- priv->has_hostscan = (firmver >= 0x8000a);
- priv->do_fw_download = 1;
- priv->broken_monitor = (firmver >= 0x80000);
- priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */
- priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */
- priv->has_wpa = (firmver >= 0x9002a);
- /* Tested with Agere firmware :
- * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II
- * Tested CableTron firmware : 4.32 => Anton */
- break;
- case FIRMWARE_TYPE_SYMBOL:
- /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */
- /* Intel MAC : 00:02:B3:* */
- /* 3Com MAC : 00:50:DA:* */
- memset(tmp, 0, sizeof(tmp));
- /* Get the Symbol firmware version */
- err = hermes_read_ltv(hw, USER_BAP,
- HERMES_RID_SECONDARYVERSION_SYMBOL,
- SYMBOL_MAX_VER_LEN, NULL, &tmp);
- if (err) {
- printk(KERN_WARNING
- "%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n",
- dev->name, err);
- firmver = 0;
- tmp[0] = '\0';
- } else {
- /* The firmware revision is a string, the format is
- * something like : "V2.20-01".
- * Quick and dirty parsing... - Jean II
- */
- firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12)
- | ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4)
- | (tmp[7] - '0');
-
- tmp[SYMBOL_MAX_VER_LEN] = '\0';
- }
-
- snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
- "Symbol %s", tmp);
-
- priv->has_ibss = (firmver >= 0x20000);
- priv->has_wep = (firmver >= 0x15012);
- priv->has_big_wep = (firmver >= 0x20000);
- priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) ||
- (firmver >= 0x29000 && firmver < 0x30000) ||
- firmver >= 0x31000;
- priv->has_preamble = (firmver >= 0x20000);
- priv->ibss_port = 4;
-
- /* Symbol firmware is found on various cards, but
- * there has been no attempt to check firmware
- * download on non-spectrum_cs based cards.
- *
- * Given that the Agere firmware download works
- * differently, we should avoid doing a firmware
- * download with the Symbol algorithm on non-spectrum
- * cards.
- *
- * For now we can identify a spectrum_cs based card
- * because it has a firmware reset function.
- */
- priv->do_fw_download = (priv->stop_fw != NULL);
-
- priv->broken_disableport = (firmver == 0x25013) ||
- (firmver >= 0x30000 && firmver <= 0x31000);
- priv->has_hostscan = (firmver >= 0x31001) ||
- (firmver >= 0x29057 && firmver < 0x30000);
- /* Tested with Intel firmware : 0x20015 => Jean II */
- /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */
- break;
- case FIRMWARE_TYPE_INTERSIL:
- /* D-Link, Linksys, Adtron, ZoomAir, and many others...
- * Samsung, Compaq 100/200 and Proxim are slightly
- * different and less well tested */
- /* D-Link MAC : 00:40:05:* */
- /* Addtron MAC : 00:90:D1:* */
- snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
- "Intersil %d.%d.%d", sta_id.major, sta_id.minor,
- sta_id.variant);
-
- firmver = ((unsigned long)sta_id.major << 16) |
- ((unsigned long)sta_id.minor << 8) | sta_id.variant;
-
- priv->has_ibss = (firmver >= 0x000700); /* FIXME */
- priv->has_big_wep = priv->has_wep = (firmver >= 0x000800);
- priv->has_pm = (firmver >= 0x000700);
- priv->has_hostscan = (firmver >= 0x010301);
-
- if (firmver >= 0x000800)
- priv->ibss_port = 0;
- else {
- printk(KERN_NOTICE "%s: Intersil firmware earlier "
- "than v0.8.x - several features not supported\n",
- dev->name);
- priv->ibss_port = 1;
- }
- break;
- }
- printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name,
- priv->fw_name);
-
- return 0;
-}
-
-static int orinoco_init(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- int err = 0;
- struct hermes_idstring nickbuf;
- u16 reclen;
- int len;
-
- /* No need to lock, the hw_unavailable flag is already set in
- * alloc_orinocodev() */
- priv->nicbuf_size = IEEE80211_MAX_FRAME_LEN + ETH_HLEN;
-
- /* Initialize the firmware */
- err = hermes_init(hw);
- if (err != 0) {
- printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n",
- dev->name, err);
- goto out;
- }
-
- err = determine_firmware(dev);
- if (err != 0) {
- printk(KERN_ERR "%s: Incompatible firmware, aborting\n",
- dev->name);
- goto out;
- }
-
- if (priv->do_fw_download) {
- err = orinoco_download(priv);
- if (err)
- priv->do_fw_download = 0;
-
- /* Check firmware version again */
- err = determine_firmware(dev);
- if (err != 0) {
- printk(KERN_ERR "%s: Incompatible firmware, aborting\n",
- dev->name);
- goto out;
- }
- }
-
- if (priv->has_port3)
- printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name);
- if (priv->has_ibss)
- printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n",
- dev->name);
- if (priv->has_wep) {
- printk(KERN_DEBUG "%s: WEP supported, ", dev->name);
- if (priv->has_big_wep)
- printk("104-bit key\n");
- else
- printk("40-bit key\n");
- }
- if (priv->has_wpa) {
- printk(KERN_DEBUG "%s: WPA-PSK supported\n", dev->name);
- if (orinoco_mic_init(priv)) {
- printk(KERN_ERR "%s: Failed to setup MIC crypto "
- "algorithm. Disabling WPA support\n", dev->name);
- priv->has_wpa = 0;
- }
- }
-
- /* Now we have the firmware capabilities, allocate appropiate
- * sized scan buffers */
- if (orinoco_bss_data_allocate(priv))
- goto out;
- orinoco_bss_data_init(priv);
-
- /* Get the MAC address */
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
- ETH_ALEN, NULL, dev->dev_addr);
- if (err) {
- printk(KERN_WARNING "%s: failed to read MAC address!\n",
- dev->name);
- goto out;
- }
-
- printk(KERN_DEBUG "%s: MAC address %pM\n",
- dev->name, dev->dev_addr);
-
- /* Get the station name */
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
- sizeof(nickbuf), &reclen, &nickbuf);
- if (err) {
- printk(KERN_ERR "%s: failed to read station name\n",
- dev->name);
- goto out;
- }
- if (nickbuf.len)
- len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len));
- else
- len = min(IW_ESSID_MAX_SIZE, 2 * reclen);
- memcpy(priv->nick, &nickbuf.val, len);
- priv->nick[len] = '\0';
-
- printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick);
-
- err = orinoco_allocate_fid(dev);
- if (err) {
- printk(KERN_ERR "%s: failed to allocate NIC buffer!\n",
- dev->name);
- goto out;
- }
-
- /* Get allowed channels */
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST,
- &priv->channel_mask);
- if (err) {
- printk(KERN_ERR "%s: failed to read channel list!\n",
- dev->name);
- goto out;
- }
-
- /* Get initial AP density */
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE,
- &priv->ap_density);
- if (err || priv->ap_density < 1 || priv->ap_density > 3) {
- priv->has_sensitivity = 0;
- }
-
- /* Get initial RTS threshold */
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
- &priv->rts_thresh);
- if (err) {
- printk(KERN_ERR "%s: failed to read RTS threshold!\n",
- dev->name);
- goto out;
- }
-
- /* Get initial fragmentation settings */
- if (priv->has_mwo)
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMWOROBUST_AGERE,
- &priv->mwo_robust);
- else
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
- &priv->frag_thresh);
- if (err) {
- printk(KERN_ERR "%s: failed to read fragmentation settings!\n",
- dev->name);
- goto out;
- }
-
- /* Power management setup */
- if (priv->has_pm) {
- priv->pm_on = 0;
- priv->pm_mcast = 1;
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMAXSLEEPDURATION,
- &priv->pm_period);
- if (err) {
- printk(KERN_ERR "%s: failed to read power management period!\n",
- dev->name);
- goto out;
- }
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPMHOLDOVERDURATION,
- &priv->pm_timeout);
- if (err) {
- printk(KERN_ERR "%s: failed to read power management timeout!\n",
- dev->name);
- goto out;
- }
- }
-
- /* Preamble setup */
- if (priv->has_preamble) {
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPREAMBLE_SYMBOL,
- &priv->preamble);
- if (err)
- goto out;
- }
-
- /* Set up the default configuration */
- priv->iw_mode = IW_MODE_INFRA;
- /* By default use IEEE/IBSS ad-hoc mode if we have it */
- priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss);
- set_port_type(priv);
- priv->channel = 0; /* use firmware default */
-
- priv->promiscuous = 0;
- priv->encode_alg = IW_ENCODE_ALG_NONE;
- priv->tx_key = 0;
- priv->wpa_enabled = 0;
- priv->tkip_cm_active = 0;
- priv->key_mgmt = 0;
- priv->wpa_ie_len = 0;
- priv->wpa_ie = NULL;
-
- /* Make the hardware available, as long as it hasn't been
- * removed elsewhere (e.g. by PCMCIA hot unplug) */
- spin_lock_irq(&priv->lock);
- priv->hw_unavailable--;
- spin_unlock_irq(&priv->lock);
-
- printk(KERN_DEBUG "%s: ready\n", dev->name);
-
- out:
- return err;
-}
-
-struct net_device
-*alloc_orinocodev(int sizeof_card,
- struct device *device,
- int (*hard_reset)(struct orinoco_private *),
- int (*stop_fw)(struct orinoco_private *, int))
-{
- struct net_device *dev;
- struct orinoco_private *priv;
-
- dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card);
- if (! dev)
- return NULL;
- priv = netdev_priv(dev);
- priv->ndev = dev;
- if (sizeof_card)
- priv->card = (void *)((unsigned long)priv
- + sizeof(struct orinoco_private));
- else
- priv->card = NULL;
- priv->dev = device;
-
- /* Setup / override net_device fields */
- dev->init = orinoco_init;
- dev->hard_start_xmit = orinoco_xmit;
- dev->tx_timeout = orinoco_tx_timeout;
- dev->watchdog_timeo = HZ; /* 1 second timeout */
- dev->get_stats = orinoco_get_stats;
- dev->ethtool_ops = &orinoco_ethtool_ops;
- dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def;
-#ifdef WIRELESS_SPY
- priv->wireless_data.spy_data = &priv->spy_data;
- dev->wireless_data = &priv->wireless_data;
-#endif
- dev->change_mtu = orinoco_change_mtu;
- dev->set_multicast_list = orinoco_set_multicast_list;
- /* we use the default eth_mac_addr for setting the MAC addr */
-
- /* Reserve space in skb for the SNAP header */
- dev->hard_header_len += ENCAPS_OVERHEAD;
-
- /* Set up default callbacks */
- dev->open = orinoco_open;
- dev->stop = orinoco_stop;
- priv->hard_reset = hard_reset;
- priv->stop_fw = stop_fw;
-
- spin_lock_init(&priv->lock);
- priv->open = 0;
- priv->hw_unavailable = 1; /* orinoco_init() must clear this
- * before anything else touches the
- * hardware */
- INIT_WORK(&priv->reset_work, orinoco_reset);
- INIT_WORK(&priv->join_work, orinoco_join_ap);
- INIT_WORK(&priv->wevent_work, orinoco_send_wevents);
-
- INIT_LIST_HEAD(&priv->rx_list);
- tasklet_init(&priv->rx_tasklet, orinoco_rx_isr_tasklet,
- (unsigned long) dev);
-
- netif_carrier_off(dev);
- priv->last_linkstatus = 0xffff;
-
- priv->cached_fw = NULL;
-
- return dev;
-}
-
-void free_orinocodev(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
-
- /* No need to empty priv->rx_list: if the tasklet is scheduled
- * when we call tasklet_kill it will run one final time,
- * emptying the list */
- tasklet_kill(&priv->rx_tasklet);
- if (priv->cached_fw)
- release_firmware(priv->cached_fw);
- priv->cached_fw = NULL;
- priv->wpa_ie_len = 0;
- kfree(priv->wpa_ie);
- orinoco_mic_free(priv);
- orinoco_bss_data_free(priv);
- free_netdev(dev);
-}
-
-/********************************************************************/
-/* Wireless extensions */
-/********************************************************************/
-
-/* Return : < 0 -> error code ; >= 0 -> length */
-static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
- char buf[IW_ESSID_MAX_SIZE+1])
-{
- hermes_t *hw = &priv->hw;
- int err = 0;
- struct hermes_idstring essidbuf;
- char *p = (char *)(&essidbuf.val);
- int len;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if (strlen(priv->desired_essid) > 0) {
- /* We read the desired SSID from the hardware rather
- than from priv->desired_essid, just in case the
- firmware is allowed to change it on us. I'm not
- sure about this */
- /* My guess is that the OWNSSID should always be whatever
- * we set to the card, whereas CURRENT_SSID is the one that
- * may change... - Jean II */
- u16 rid;
-
- *active = 1;
-
- rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID :
- HERMES_RID_CNFDESIREDSSID;
-
- err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf),
- NULL, &essidbuf);
- if (err)
- goto fail_unlock;
- } else {
- *active = 0;
-
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID,
- sizeof(essidbuf), NULL, &essidbuf);
- if (err)
- goto fail_unlock;
- }
-
- len = le16_to_cpu(essidbuf.len);
- BUG_ON(len > IW_ESSID_MAX_SIZE);
-
- memset(buf, 0, IW_ESSID_MAX_SIZE);
- memcpy(buf, p, len);
- err = len;
-
- fail_unlock:
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static long orinoco_hw_get_freq(struct orinoco_private *priv)
-{
-
- hermes_t *hw = &priv->hw;
- int err = 0;
- u16 channel;
- long freq = 0;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel);
- if (err)
- goto out;
-
- /* Intersil firmware 1.3.5 returns 0 when the interface is down */
- if (channel == 0) {
- err = -EBUSY;
- goto out;
- }
-
- if ( (channel < 1) || (channel > NUM_CHANNELS) ) {
- printk(KERN_WARNING "%s: Channel out of range (%d)!\n",
- priv->ndev->name, channel);
- err = -EBUSY;
- goto out;
-
- }
- freq = channel_frequency[channel-1] * 100000;
-
- out:
- orinoco_unlock(priv, &flags);
-
- if (err > 0)
- err = -EBUSY;
- return err ? err : freq;
-}
-
-static int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
- int *numrates, s32 *rates, int max)
-{
- hermes_t *hw = &priv->hw;
- struct hermes_idstring list;
- unsigned char *p = (unsigned char *)&list.val;
- int err = 0;
- int num;
- int i;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES,
- sizeof(list), NULL, &list);
- orinoco_unlock(priv, &flags);
-
- if (err)
- return err;
-
- num = le16_to_cpu(list.len);
- *numrates = num;
- num = min(num, max);
-
- for (i = 0; i < num; i++) {
- rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */
- }
-
- return 0;
-}
-
-static int orinoco_ioctl_getname(struct net_device *dev,
- struct iw_request_info *info,
- char *name,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int numrates;
- int err;
-
- err = orinoco_hw_get_bitratelist(priv, &numrates, NULL, 0);
-
- if (!err && (numrates > 2))
- strcpy(name, "IEEE 802.11b");
- else
- strcpy(name, "IEEE 802.11-DS");
-
- return 0;
-}
-
-static int orinoco_ioctl_setwap(struct net_device *dev,
- struct iw_request_info *info,
- struct sockaddr *ap_addr,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int err = -EINPROGRESS; /* Call commit handler */
- unsigned long flags;
- static const u8 off_addr[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
- static const u8 any_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- /* Enable automatic roaming - no sanity checks are needed */
- if (memcmp(&ap_addr->sa_data, off_addr, ETH_ALEN) == 0 ||
- memcmp(&ap_addr->sa_data, any_addr, ETH_ALEN) == 0) {
- priv->bssid_fixed = 0;
- memset(priv->desired_bssid, 0, ETH_ALEN);
-
- /* "off" means keep existing connection */
- if (ap_addr->sa_data[0] == 0) {
- __orinoco_hw_set_wap(priv);
- err = 0;
- }
- goto out;
- }
-
- if (priv->firmware_type == FIRMWARE_TYPE_AGERE) {
- printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't "
- "support manual roaming\n",
- dev->name);
- err = -EOPNOTSUPP;
- goto out;
- }
-
- if (priv->iw_mode != IW_MODE_INFRA) {
- printk(KERN_WARNING "%s: Manual roaming supported only in "
- "managed mode\n", dev->name);
- err = -EOPNOTSUPP;
- goto out;
- }
-
- /* Intersil firmware hangs without Desired ESSID */
- if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL &&
- strlen(priv->desired_essid) == 0) {
- printk(KERN_WARNING "%s: Desired ESSID must be set for "
- "manual roaming\n", dev->name);
- err = -EOPNOTSUPP;
- goto out;
- }
-
- /* Finally, enable manual roaming */
- priv->bssid_fixed = 1;
- memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN);
-
- out:
- orinoco_unlock(priv, &flags);
- return err;
-}
-
-static int orinoco_ioctl_getwap(struct net_device *dev,
- struct iw_request_info *info,
- struct sockaddr *ap_addr,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
-
- hermes_t *hw = &priv->hw;
- int err = 0;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- ap_addr->sa_family = ARPHRD_ETHER;
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
- ETH_ALEN, NULL, ap_addr->sa_data);
-
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_setmode(struct net_device *dev,
- struct iw_request_info *info,
- u32 *mode,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int err = -EINPROGRESS; /* Call commit handler */
- unsigned long flags;
-
- if (priv->iw_mode == *mode)
- return 0;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- switch (*mode) {
- case IW_MODE_ADHOC:
- if (!priv->has_ibss && !priv->has_port3)
- err = -EOPNOTSUPP;
- break;
-
- case IW_MODE_INFRA:
- break;
-
- case IW_MODE_MONITOR:
- if (priv->broken_monitor && !force_monitor) {
- printk(KERN_WARNING "%s: Monitor mode support is "
- "buggy in this firmware, not enabling\n",
- dev->name);
- err = -EOPNOTSUPP;
- }
- break;
-
- default:
- err = -EOPNOTSUPP;
- break;
- }
-
- if (err == -EINPROGRESS) {
- priv->iw_mode = *mode;
- set_port_type(priv);
- }
-
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_getmode(struct net_device *dev,
- struct iw_request_info *info,
- u32 *mode,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
-
- *mode = priv->iw_mode;
- return 0;
-}
-
-static int orinoco_ioctl_getiwrange(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *rrq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int err = 0;
- struct iw_range *range = (struct iw_range *) extra;
- int numrates;
- int i, k;
-
- rrq->length = sizeof(struct iw_range);
- memset(range, 0, sizeof(struct iw_range));
-
- range->we_version_compiled = WIRELESS_EXT;
- range->we_version_source = 22;
-
- /* Set available channels/frequencies */
- range->num_channels = NUM_CHANNELS;
- k = 0;
- for (i = 0; i < NUM_CHANNELS; i++) {
- if (priv->channel_mask & (1 << i)) {
- range->freq[k].i = i + 1;
- range->freq[k].m = channel_frequency[i] * 100000;
- range->freq[k].e = 1;
- k++;
- }
-
- if (k >= IW_MAX_FREQUENCIES)
- break;
- }
- range->num_frequency = k;
- range->sensitivity = 3;
-
- if (priv->has_wep) {
- range->max_encoding_tokens = ORINOCO_MAX_KEYS;
- range->encoding_size[0] = SMALL_KEY_SIZE;
- range->num_encoding_sizes = 1;
-
- if (priv->has_big_wep) {
- range->encoding_size[1] = LARGE_KEY_SIZE;
- range->num_encoding_sizes = 2;
- }
- }
-
- if (priv->has_wpa)
- range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_CIPHER_TKIP;
-
- if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){
- /* Quality stats meaningless in ad-hoc mode */
- } else {
- range->max_qual.qual = 0x8b - 0x2f;
- range->max_qual.level = 0x2f - 0x95 - 1;
- range->max_qual.noise = 0x2f - 0x95 - 1;
- /* Need to get better values */
- range->avg_qual.qual = 0x24;
- range->avg_qual.level = 0xC2;
- range->avg_qual.noise = 0x9E;
- }
-
- err = orinoco_hw_get_bitratelist(priv, &numrates,
- range->bitrate, IW_MAX_BITRATES);
- if (err)
- return err;
- range->num_bitrates = numrates;
-
- /* Set an indication of the max TCP throughput in bit/s that we can
- * expect using this interface. May be use for QoS stuff...
- * Jean II */
- if (numrates > 2)
- range->throughput = 5 * 1000 * 1000; /* ~5 Mb/s */
- else
- range->throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */
-
- range->min_rts = 0;
- range->max_rts = 2347;
- range->min_frag = 256;
- range->max_frag = 2346;
-
- range->min_pmp = 0;
- range->max_pmp = 65535000;
- range->min_pmt = 0;
- range->max_pmt = 65535 * 1000; /* ??? */
- range->pmp_flags = IW_POWER_PERIOD;
- range->pmt_flags = IW_POWER_TIMEOUT;
- range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R;
-
- range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
- range->retry_flags = IW_RETRY_LIMIT;
- range->r_time_flags = IW_RETRY_LIFETIME;
- range->min_retry = 0;
- range->max_retry = 65535; /* ??? */
- range->min_r_time = 0;
- range->max_r_time = 65535 * 1000; /* ??? */
-
- if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
- range->scan_capa = IW_SCAN_CAPA_ESSID;
- else
- range->scan_capa = IW_SCAN_CAPA_NONE;
-
- /* Event capability (kernel) */
- IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
- /* Event capability (driver) */
- IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY);
- IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
- IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
- IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP);
-
- return 0;
-}
-
-static int orinoco_ioctl_setiwencode(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *erq,
- char *keybuf)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int index = (erq->flags & IW_ENCODE_INDEX) - 1;
- int setindex = priv->tx_key;
- int encode_alg = priv->encode_alg;
- int restricted = priv->wep_restrict;
- u16 xlen = 0;
- int err = -EINPROGRESS; /* Call commit handler */
- unsigned long flags;
-
- if (! priv->has_wep)
- return -EOPNOTSUPP;
-
- if (erq->pointer) {
- /* We actually have a key to set - check its length */
- if (erq->length > LARGE_KEY_SIZE)
- return -E2BIG;
-
- if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep )
- return -E2BIG;
- }
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- /* Clear any TKIP key we have */
- if ((priv->has_wpa) && (priv->encode_alg == IW_ENCODE_ALG_TKIP))
- (void) orinoco_clear_tkip_key(priv, setindex);
-
- if (erq->length > 0) {
- if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
- index = priv->tx_key;
-
- /* Adjust key length to a supported value */
- if (erq->length > SMALL_KEY_SIZE) {
- xlen = LARGE_KEY_SIZE;
- } else if (erq->length > 0) {
- xlen = SMALL_KEY_SIZE;
- } else
- xlen = 0;
-
- /* Switch on WEP if off */
- if ((encode_alg != IW_ENCODE_ALG_WEP) && (xlen > 0)) {
- setindex = index;
- encode_alg = IW_ENCODE_ALG_WEP;
- }
- } else {
- /* Important note : if the user do "iwconfig eth0 enc off",
- * we will arrive there with an index of -1. This is valid
- * but need to be taken care off... Jean II */
- if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) {
- if((index != -1) || (erq->flags == 0)) {
- err = -EINVAL;
- goto out;
- }
- } else {
- /* Set the index : Check that the key is valid */
- if(priv->keys[index].len == 0) {
- err = -EINVAL;
- goto out;
- }
- setindex = index;
- }
- }
-
- if (erq->flags & IW_ENCODE_DISABLED)
- encode_alg = IW_ENCODE_ALG_NONE;
- if (erq->flags & IW_ENCODE_OPEN)
- restricted = 0;
- if (erq->flags & IW_ENCODE_RESTRICTED)
- restricted = 1;
-
- if (erq->pointer && erq->length > 0) {
- priv->keys[index].len = cpu_to_le16(xlen);
- memset(priv->keys[index].data, 0,
- sizeof(priv->keys[index].data));
- memcpy(priv->keys[index].data, keybuf, erq->length);
- }
- priv->tx_key = setindex;
-
- /* Try fast key change if connected and only keys are changed */
- if ((priv->encode_alg == encode_alg) &&
- (priv->wep_restrict == restricted) &&
- netif_carrier_ok(dev)) {
- err = __orinoco_hw_setup_wepkeys(priv);
- /* No need to commit if successful */
- goto out;
- }
-
- priv->encode_alg = encode_alg;
- priv->wep_restrict = restricted;
-
- out:
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_getiwencode(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *erq,
- char *keybuf)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int index = (erq->flags & IW_ENCODE_INDEX) - 1;
- u16 xlen = 0;
- unsigned long flags;
-
- if (! priv->has_wep)
- return -EOPNOTSUPP;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
- index = priv->tx_key;
-
- erq->flags = 0;
- if (!priv->encode_alg)
- erq->flags |= IW_ENCODE_DISABLED;
- erq->flags |= index + 1;
-
- if (priv->wep_restrict)
- erq->flags |= IW_ENCODE_RESTRICTED;
- else
- erq->flags |= IW_ENCODE_OPEN;
-
- xlen = le16_to_cpu(priv->keys[index].len);
-
- erq->length = xlen;
-
- memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE);
-
- orinoco_unlock(priv, &flags);
- return 0;
-}
-
-static int orinoco_ioctl_setessid(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *erq,
- char *essidbuf)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
-
- /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it
- * anyway... - Jean II */
-
- /* Hum... Should not use Wireless Extension constant (may change),
- * should use our own... - Jean II */
- if (erq->length > IW_ESSID_MAX_SIZE)
- return -E2BIG;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- /* NULL the string (for NULL termination & ESSID = ANY) - Jean II */
- memset(priv->desired_essid, 0, sizeof(priv->desired_essid));
-
- /* If not ANY, get the new ESSID */
- if (erq->flags) {
- memcpy(priv->desired_essid, essidbuf, erq->length);
- }
-
- orinoco_unlock(priv, &flags);
-
- return -EINPROGRESS; /* Call commit handler */
-}
-
-static int orinoco_ioctl_getessid(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *erq,
- char *essidbuf)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int active;
- int err = 0;
- unsigned long flags;
-
- if (netif_running(dev)) {
- err = orinoco_hw_get_essid(priv, &active, essidbuf);
- if (err < 0)
- return err;
- erq->length = err;
- } else {
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE);
- erq->length = strlen(priv->desired_essid);
- orinoco_unlock(priv, &flags);
- }
-
- erq->flags = 1;
-
- return 0;
-}
-
-static int orinoco_ioctl_setnick(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *nrq,
- char *nickbuf)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
-
- if (nrq->length > IW_ESSID_MAX_SIZE)
- return -E2BIG;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- memset(priv->nick, 0, sizeof(priv->nick));
- memcpy(priv->nick, nickbuf, nrq->length);
-
- orinoco_unlock(priv, &flags);
-
- return -EINPROGRESS; /* Call commit handler */
-}
-
-static int orinoco_ioctl_getnick(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *nrq,
- char *nickbuf)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE);
- orinoco_unlock(priv, &flags);
-
- nrq->length = strlen(priv->nick);
-
- return 0;
-}
-
-static int orinoco_ioctl_setfreq(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_freq *frq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int chan = -1;
- unsigned long flags;
- int err = -EINPROGRESS; /* Call commit handler */
-
- /* In infrastructure mode the AP sets the channel */
- if (priv->iw_mode == IW_MODE_INFRA)
- return -EBUSY;
-
- if ( (frq->e == 0) && (frq->m <= 1000) ) {
- /* Setting by channel number */
- chan = frq->m;
- } else {
- /* Setting by frequency - search the table */
- int mult = 1;
- int i;
-
- for (i = 0; i < (6 - frq->e); i++)
- mult *= 10;
-
- for (i = 0; i < NUM_CHANNELS; i++)
- if (frq->m == (channel_frequency[i] * mult))
- chan = i+1;
- }
-
- if ( (chan < 1) || (chan > NUM_CHANNELS) ||
- ! (priv->channel_mask & (1 << (chan-1)) ) )
- return -EINVAL;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- priv->channel = chan;
- if (priv->iw_mode == IW_MODE_MONITOR) {
- /* Fast channel change - no commit if successful */
- hermes_t *hw = &priv->hw;
- err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
- HERMES_TEST_SET_CHANNEL,
- chan, NULL);
- }
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_getfreq(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_freq *frq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int tmp;
-
- /* Locking done in there */
- tmp = orinoco_hw_get_freq(priv);
- if (tmp < 0) {
- return tmp;
- }
-
- frq->m = tmp;
- frq->e = 1;
-
- return 0;
-}
-
-static int orinoco_ioctl_getsens(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *srq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- u16 val;
- int err;
- unsigned long flags;
-
- if (!priv->has_sensitivity)
- return -EOPNOTSUPP;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFSYSTEMSCALE, &val);
- orinoco_unlock(priv, &flags);
-
- if (err)
- return err;
-
- srq->value = val;
- srq->fixed = 0; /* auto */
-
- return 0;
-}
-
-static int orinoco_ioctl_setsens(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *srq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int val = srq->value;
- unsigned long flags;
-
- if (!priv->has_sensitivity)
- return -EOPNOTSUPP;
-
- if ((val < 1) || (val > 3))
- return -EINVAL;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- priv->ap_density = val;
- orinoco_unlock(priv, &flags);
-
- return -EINPROGRESS; /* Call commit handler */
-}
-
-static int orinoco_ioctl_setrts(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rrq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int val = rrq->value;
- unsigned long flags;
-
- if (rrq->disabled)
- val = 2347;
-
- if ( (val < 0) || (val > 2347) )
- return -EINVAL;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- priv->rts_thresh = val;
- orinoco_unlock(priv, &flags);
-
- return -EINPROGRESS; /* Call commit handler */
-}
-
-static int orinoco_ioctl_getrts(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rrq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
-
- rrq->value = priv->rts_thresh;
- rrq->disabled = (rrq->value == 2347);
- rrq->fixed = 1;
-
- return 0;
-}
-
-static int orinoco_ioctl_setfrag(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *frq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int err = -EINPROGRESS; /* Call commit handler */
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if (priv->has_mwo) {
- if (frq->disabled)
- priv->mwo_robust = 0;
- else {
- if (frq->fixed)
- printk(KERN_WARNING "%s: Fixed fragmentation is "
- "not supported on this firmware. "
- "Using MWO robust instead.\n", dev->name);
- priv->mwo_robust = 1;
- }
- } else {
- if (frq->disabled)
- priv->frag_thresh = 2346;
- else {
- if ( (frq->value < 256) || (frq->value > 2346) )
- err = -EINVAL;
- else
- priv->frag_thresh = frq->value & ~0x1; /* must be even */
- }
- }
-
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_getfrag(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *frq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- int err;
- u16 val;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if (priv->has_mwo) {
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMWOROBUST_AGERE,
- &val);
- if (err)
- val = 0;
-
- frq->value = val ? 2347 : 0;
- frq->disabled = ! val;
- frq->fixed = 0;
- } else {
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
- &val);
- if (err)
- val = 0;
-
- frq->value = val;
- frq->disabled = (val >= 2346);
- frq->fixed = 1;
- }
-
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_setrate(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rrq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int ratemode = -1;
- int bitrate; /* 100s of kilobits */
- int i;
- unsigned long flags;
-
- /* As the user space doesn't know our highest rate, it uses -1
- * to ask us to set the highest rate. Test it using "iwconfig
- * ethX rate auto" - Jean II */
- if (rrq->value == -1)
- bitrate = 110;
- else {
- if (rrq->value % 100000)
- return -EINVAL;
- bitrate = rrq->value / 100000;
- }
-
- if ( (bitrate != 10) && (bitrate != 20) &&
- (bitrate != 55) && (bitrate != 110) )
- return -EINVAL;
-
- for (i = 0; i < BITRATE_TABLE_SIZE; i++)
- if ( (bitrate_table[i].bitrate == bitrate) &&
- (bitrate_table[i].automatic == ! rrq->fixed) ) {
- ratemode = i;
- break;
- }
-
- if (ratemode == -1)
- return -EINVAL;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- priv->bitratemode = ratemode;
- orinoco_unlock(priv, &flags);
-
- return -EINPROGRESS;
-}
-
-static int orinoco_ioctl_getrate(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rrq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- int err = 0;
- int ratemode;
- int i;
- u16 val;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- ratemode = priv->bitratemode;
-
- BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE));
-
- rrq->value = bitrate_table[ratemode].bitrate * 100000;
- rrq->fixed = ! bitrate_table[ratemode].automatic;
- rrq->disabled = 0;
-
- /* If the interface is running we try to find more about the
- current mode */
- if (netif_running(dev)) {
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CURRENTTXRATE, &val);
- if (err)
- goto out;
-
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE: /* Lucent style rate */
- /* Note : in Lucent firmware, the return value of
- * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s,
- * and therefore is totally different from the
- * encoding of HERMES_RID_CNFTXRATECONTROL.
- * Don't forget that 6Mb/s is really 5.5Mb/s */
- if (val == 6)
- rrq->value = 5500000;
- else
- rrq->value = val * 1000000;
- break;
- case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */
- case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */
- for (i = 0; i < BITRATE_TABLE_SIZE; i++)
- if (bitrate_table[i].intersil_txratectrl == val) {
- ratemode = i;
- break;
- }
- if (i >= BITRATE_TABLE_SIZE)
- printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n",
- dev->name, val);
-
- rrq->value = bitrate_table[ratemode].bitrate * 100000;
- break;
- default:
- BUG();
- }
- }
-
- out:
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_setpower(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *prq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int err = -EINPROGRESS; /* Call commit handler */
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if (prq->disabled) {
- priv->pm_on = 0;
- } else {
- switch (prq->flags & IW_POWER_MODE) {
- case IW_POWER_UNICAST_R:
- priv->pm_mcast = 0;
- priv->pm_on = 1;
- break;
- case IW_POWER_ALL_R:
- priv->pm_mcast = 1;
- priv->pm_on = 1;
- break;
- case IW_POWER_ON:
- /* No flags : but we may have a value - Jean II */
- break;
- default:
- err = -EINVAL;
- goto out;
- }
-
- if (prq->flags & IW_POWER_TIMEOUT) {
- priv->pm_on = 1;
- priv->pm_timeout = prq->value / 1000;
- }
- if (prq->flags & IW_POWER_PERIOD) {
- priv->pm_on = 1;
- priv->pm_period = prq->value / 1000;
- }
- /* It's valid to not have a value if we are just toggling
- * the flags... Jean II */
- if(!priv->pm_on) {
- err = -EINVAL;
- goto out;
- }
- }
-
- out:
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_getpower(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *prq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- int err = 0;
- u16 enable, period, timeout, mcast;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable);
- if (err)
- goto out;
-
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMAXSLEEPDURATION, &period);
- if (err)
- goto out;
-
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout);
- if (err)
- goto out;
-
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast);
- if (err)
- goto out;
-
- prq->disabled = !enable;
- /* Note : by default, display the period */
- if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
- prq->flags = IW_POWER_TIMEOUT;
- prq->value = timeout * 1000;
- } else {
- prq->flags = IW_POWER_PERIOD;
- prq->value = period * 1000;
- }
- if (mcast)
- prq->flags |= IW_POWER_ALL_R;
- else
- prq->flags |= IW_POWER_UNICAST_R;
-
- out:
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_set_encodeext(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct iw_point *encoding = &wrqu->encoding;
- struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
- int idx, alg = ext->alg, set_key = 1;
- unsigned long flags;
- int err = -EINVAL;
- u16 key_len;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- /* Determine and validate the key index */
- idx = encoding->flags & IW_ENCODE_INDEX;
- if (idx) {
- if ((idx < 1) || (idx > 4))
- goto out;
- idx--;
- } else
- idx = priv->tx_key;
-
- if (encoding->flags & IW_ENCODE_DISABLED)
- alg = IW_ENCODE_ALG_NONE;
-
- if (priv->has_wpa && (alg != IW_ENCODE_ALG_TKIP)) {
- /* Clear any TKIP TX key we had */
- (void) orinoco_clear_tkip_key(priv, priv->tx_key);
- }
-
- if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
- priv->tx_key = idx;
- set_key = ((alg == IW_ENCODE_ALG_TKIP) ||
- (ext->key_len > 0)) ? 1 : 0;
- }
-
- if (set_key) {
- /* Set the requested key first */
- switch (alg) {
- case IW_ENCODE_ALG_NONE:
- priv->encode_alg = alg;
- priv->keys[idx].len = 0;
- break;
-
- case IW_ENCODE_ALG_WEP:
- if (ext->key_len > SMALL_KEY_SIZE)
- key_len = LARGE_KEY_SIZE;
- else if (ext->key_len > 0)
- key_len = SMALL_KEY_SIZE;
- else
- goto out;
-
- priv->encode_alg = alg;
- priv->keys[idx].len = cpu_to_le16(key_len);
-
- key_len = min(ext->key_len, key_len);
-
- memset(priv->keys[idx].data, 0, ORINOCO_MAX_KEY_SIZE);
- memcpy(priv->keys[idx].data, ext->key, key_len);
- break;
-
- case IW_ENCODE_ALG_TKIP:
- {
- hermes_t *hw = &priv->hw;
- u8 *tkip_iv = NULL;
-
- if (!priv->has_wpa ||
- (ext->key_len > sizeof(priv->tkip_key[0])))
- goto out;
-
- priv->encode_alg = alg;
- memset(&priv->tkip_key[idx], 0,
- sizeof(priv->tkip_key[idx]));
- memcpy(&priv->tkip_key[idx], ext->key, ext->key_len);
-
- if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID)
- tkip_iv = &ext->rx_seq[0];
-
- err = __orinoco_hw_set_tkip_key(hw, idx,
- ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY,
- (u8 *) &priv->tkip_key[idx],
- tkip_iv, NULL);
- if (err)
- printk(KERN_ERR "%s: Error %d setting TKIP key"
- "\n", dev->name, err);
-
- goto out;
- }
- default:
- goto out;
- }
- }
- err = -EINPROGRESS;
- out:
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_get_encodeext(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct iw_point *encoding = &wrqu->encoding;
- struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
- int idx, max_key_len;
- unsigned long flags;
- int err;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = -EINVAL;
- max_key_len = encoding->length - sizeof(*ext);
- if (max_key_len < 0)
- goto out;
-
- idx = encoding->flags & IW_ENCODE_INDEX;
- if (idx) {
- if ((idx < 1) || (idx > 4))
- goto out;
- idx--;
- } else
- idx = priv->tx_key;
-
- encoding->flags = idx + 1;
- memset(ext, 0, sizeof(*ext));
-
- ext->alg = priv->encode_alg;
- switch (priv->encode_alg) {
- case IW_ENCODE_ALG_NONE:
- ext->key_len = 0;
- encoding->flags |= IW_ENCODE_DISABLED;
- break;
- case IW_ENCODE_ALG_WEP:
- ext->key_len = min_t(u16, le16_to_cpu(priv->keys[idx].len),
- max_key_len);
- memcpy(ext->key, priv->keys[idx].data, ext->key_len);
- encoding->flags |= IW_ENCODE_ENABLED;
- break;
- case IW_ENCODE_ALG_TKIP:
- ext->key_len = min_t(u16, sizeof(struct orinoco_tkip_key),
- max_key_len);
- memcpy(ext->key, &priv->tkip_key[idx], ext->key_len);
- encoding->flags |= IW_ENCODE_ENABLED;
- break;
- }
-
- err = 0;
- out:
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_set_auth(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- struct iw_param *param = &wrqu->param;
- unsigned long flags;
- int ret = -EINPROGRESS;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- switch (param->flags & IW_AUTH_INDEX) {
- case IW_AUTH_WPA_VERSION:
- case IW_AUTH_CIPHER_PAIRWISE:
- case IW_AUTH_CIPHER_GROUP:
- case IW_AUTH_RX_UNENCRYPTED_EAPOL:
- case IW_AUTH_PRIVACY_INVOKED:
- case IW_AUTH_DROP_UNENCRYPTED:
- /*
- * orinoco does not use these parameters
- */
- break;
-
- case IW_AUTH_KEY_MGMT:
- /* wl_lkm implies value 2 == PSK for Hermes I
- * which ties in with WEXT
- * no other hints tho :(
- */
- priv->key_mgmt = param->value;
- break;
-
- case IW_AUTH_TKIP_COUNTERMEASURES:
- /* When countermeasures are enabled, shut down the
- * card; when disabled, re-enable the card. This must
- * take effect immediately.
- *
- * TODO: Make sure that the EAPOL message is getting
- * out before card disabled
- */
- if (param->value) {
- priv->tkip_cm_active = 1;
- ret = hermes_enable_port(hw, 0);
- } else {
- priv->tkip_cm_active = 0;
- ret = hermes_disable_port(hw, 0);
- }
- break;
-
- case IW_AUTH_80211_AUTH_ALG:
- if (param->value & IW_AUTH_ALG_SHARED_KEY)
- priv->wep_restrict = 1;
- else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM)
- priv->wep_restrict = 0;
- else
- ret = -EINVAL;
- break;
-
- case IW_AUTH_WPA_ENABLED:
- if (priv->has_wpa) {
- priv->wpa_enabled = param->value ? 1 : 0;
- } else {
- if (param->value)
- ret = -EOPNOTSUPP;
- /* else silently accept disable of WPA */
- priv->wpa_enabled = 0;
- }
- break;
-
- default:
- ret = -EOPNOTSUPP;
- }
-
- orinoco_unlock(priv, &flags);
- return ret;
-}
-
-static int orinoco_ioctl_get_auth(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct iw_param *param = &wrqu->param;
- unsigned long flags;
- int ret = 0;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- switch (param->flags & IW_AUTH_INDEX) {
- case IW_AUTH_KEY_MGMT:
- param->value = priv->key_mgmt;
- break;
-
- case IW_AUTH_TKIP_COUNTERMEASURES:
- param->value = priv->tkip_cm_active;
- break;
-
- case IW_AUTH_80211_AUTH_ALG:
- if (priv->wep_restrict)
- param->value = IW_AUTH_ALG_SHARED_KEY;
- else
- param->value = IW_AUTH_ALG_OPEN_SYSTEM;
- break;
-
- case IW_AUTH_WPA_ENABLED:
- param->value = priv->wpa_enabled;
- break;
-
- default:
- ret = -EOPNOTSUPP;
- }
-
- orinoco_unlock(priv, &flags);
- return ret;
-}
-
-static int orinoco_ioctl_set_genie(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- u8 *buf;
- unsigned long flags;
- int err = 0;
-
- /* cut off at IEEE80211_MAX_DATA_LEN */
- if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) ||
- (wrqu->data.length && (extra == NULL)))
- return -EINVAL;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if (wrqu->data.length) {
- buf = kmalloc(wrqu->data.length, GFP_KERNEL);
- if (buf == NULL) {
- err = -ENOMEM;
- goto out;
- }
-
- memcpy(buf, extra, wrqu->data.length);
- kfree(priv->wpa_ie);
- priv->wpa_ie = buf;
- priv->wpa_ie_len = wrqu->data.length;
- } else {
- kfree(priv->wpa_ie);
- priv->wpa_ie = NULL;
- priv->wpa_ie_len = 0;
- }
-
- if (priv->wpa_ie) {
- /* Looks like wl_lkm wants to check the auth alg, and
- * somehow pass it to the firmware.
- * Instead it just calls the key mgmt rid
- * - we do this in set auth.
- */
- }
-
-out:
- orinoco_unlock(priv, &flags);
- return err;
-}
-
-static int orinoco_ioctl_get_genie(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
- int err = 0;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if ((priv->wpa_ie_len == 0) || (priv->wpa_ie == NULL)) {
- wrqu->data.length = 0;
- goto out;
- }
-
- if (wrqu->data.length < priv->wpa_ie_len) {
- err = -E2BIG;
- goto out;
- }
-
- wrqu->data.length = priv->wpa_ie_len;
- memcpy(extra, priv->wpa_ie, priv->wpa_ie_len);
-
-out:
- orinoco_unlock(priv, &flags);
- return err;
-}
-
-static int orinoco_ioctl_set_mlme(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- struct iw_mlme *mlme = (struct iw_mlme *)extra;
- unsigned long flags;
- int ret = 0;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- switch (mlme->cmd) {
- case IW_MLME_DEAUTH:
- /* silently ignore */
- break;
-
- case IW_MLME_DISASSOC:
- {
- struct {
- u8 addr[ETH_ALEN];
- __le16 reason_code;
- } __attribute__ ((packed)) buf;
-
- memcpy(buf.addr, mlme->addr.sa_data, ETH_ALEN);
- buf.reason_code = cpu_to_le16(mlme->reason_code);
- ret = HERMES_WRITE_RECORD(hw, USER_BAP,
- HERMES_RID_CNFDISASSOCIATE,
- &buf);
- break;
- }
- default:
- ret = -EOPNOTSUPP;
- }
-
- orinoco_unlock(priv, &flags);
- return ret;
-}
-
-static int orinoco_ioctl_getretry(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rrq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- int err = 0;
- u16 short_limit, long_limit, lifetime;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT,
- &short_limit);
- if (err)
- goto out;
-
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT,
- &long_limit);
- if (err)
- goto out;
-
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME,
- &lifetime);
- if (err)
- goto out;
-
- rrq->disabled = 0; /* Can't be disabled */
-
- /* Note : by default, display the retry number */
- if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
- rrq->flags = IW_RETRY_LIFETIME;
- rrq->value = lifetime * 1000; /* ??? */
- } else {
- /* By default, display the min number */
- if ((rrq->flags & IW_RETRY_LONG)) {
- rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
- rrq->value = long_limit;
- } else {
- rrq->flags = IW_RETRY_LIMIT;
- rrq->value = short_limit;
- if(short_limit != long_limit)
- rrq->flags |= IW_RETRY_SHORT;
- }
- }
-
- out:
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_reset(struct net_device *dev,
- struct iw_request_info *info,
- void *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
-
- if (! capable(CAP_NET_ADMIN))
- return -EPERM;
-
- if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) {
- printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name);
-
- /* Firmware reset */
- orinoco_reset(&priv->reset_work);
- } else {
- printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name);
-
- schedule_work(&priv->reset_work);
- }
-
- return 0;
-}
-
-static int orinoco_ioctl_setibssport(struct net_device *dev,
- struct iw_request_info *info,
- void *wrqu,
- char *extra)
-
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int val = *( (int *) extra );
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- priv->ibss_port = val ;
-
- /* Actually update the mode we are using */
- set_port_type(priv);
-
- orinoco_unlock(priv, &flags);
- return -EINPROGRESS; /* Call commit handler */
-}
-
-static int orinoco_ioctl_getibssport(struct net_device *dev,
- struct iw_request_info *info,
- void *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int *val = (int *) extra;
-
- *val = priv->ibss_port;
- return 0;
-}
-
-static int orinoco_ioctl_setport3(struct net_device *dev,
- struct iw_request_info *info,
- void *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int val = *( (int *) extra );
- int err = 0;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- switch (val) {
- case 0: /* Try to do IEEE ad-hoc mode */
- if (! priv->has_ibss) {
- err = -EINVAL;
- break;
- }
- priv->prefer_port3 = 0;
-
- break;
-
- case 1: /* Try to do Lucent proprietary ad-hoc mode */
- if (! priv->has_port3) {
- err = -EINVAL;
- break;
- }
- priv->prefer_port3 = 1;
- break;
-
- default:
- err = -EINVAL;
- }
-
- if (! err) {
- /* Actually update the mode we are using */
- set_port_type(priv);
- err = -EINPROGRESS;
- }
-
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_getport3(struct net_device *dev,
- struct iw_request_info *info,
- void *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int *val = (int *) extra;
-
- *val = priv->prefer_port3;
- return 0;
-}
-
-static int orinoco_ioctl_setpreamble(struct net_device *dev,
- struct iw_request_info *info,
- void *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
- int val;
-
- if (! priv->has_preamble)
- return -EOPNOTSUPP;
-
- /* 802.11b has recently defined some short preamble.
- * Basically, the Phy header has been reduced in size.
- * This increase performance, especially at high rates
- * (the preamble is transmitted at 1Mb/s), unfortunately
- * this give compatibility troubles... - Jean II */
- val = *( (int *) extra );
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if (val)
- priv->preamble = 1;
- else
- priv->preamble = 0;
-
- orinoco_unlock(priv, &flags);
-
- return -EINPROGRESS; /* Call commit handler */
-}
-
-static int orinoco_ioctl_getpreamble(struct net_device *dev,
- struct iw_request_info *info,
- void *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int *val = (int *) extra;
-
- if (! priv->has_preamble)
- return -EOPNOTSUPP;
-
- *val = priv->preamble;
- return 0;
-}
-
-/* ioctl interface to hermes_read_ltv()
- * To use with iwpriv, pass the RID as the token argument, e.g.
- * iwpriv get_rid [0xfc00]
- * At least Wireless Tools 25 is required to use iwpriv.
- * For Wireless Tools 25 and 26 append "dummy" are the end. */
-static int orinoco_ioctl_getrid(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- int rid = data->flags;
- u16 length;
- int err;
- unsigned long flags;
-
- /* It's a "get" function, but we don't want users to access the
- * WEP key and other raw firmware data */
- if (! capable(CAP_NET_ADMIN))
- return -EPERM;
-
- if (rid < 0xfc00 || rid > 0xffff)
- return -EINVAL;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = hermes_read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length,
- extra);
- if (err)
- goto out;
-
- data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length),
- MAX_RID_LEN);
-
- out:
- orinoco_unlock(priv, &flags);
- return err;
-}
-
-/* Trigger a scan (look for other cells in the vicinity) */
-static int orinoco_ioctl_setscan(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *srq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- struct iw_scan_req *si = (struct iw_scan_req *) extra;
- int err = 0;
- unsigned long flags;
-
- /* Note : you may have realised that, as this is a SET operation,
- * this is privileged and therefore a normal user can't
- * perform scanning.
- * This is not an error, while the device perform scanning,
- * traffic doesn't flow, so it's a perfect DoS...
- * Jean II */
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- /* Scanning with port 0 disabled would fail */
- if (!netif_running(dev)) {
- err = -ENETDOWN;
- goto out;
- }
-
- /* In monitor mode, the scan results are always empty.
- * Probe responses are passed to the driver as received
- * frames and could be processed in software. */
- if (priv->iw_mode == IW_MODE_MONITOR) {
- err = -EOPNOTSUPP;
- goto out;
- }
-
- /* Note : because we don't lock out the irq handler, the way
- * we access scan variables in priv is critical.
- * o scan_inprogress : not touched by irq handler
- * o scan_mode : not touched by irq handler
- * Before modifying anything on those variables, please think hard !
- * Jean II */
-
- /* Save flags */
- priv->scan_mode = srq->flags;
-
- /* Always trigger scanning, even if it's in progress.
- * This way, if the info frame get lost, we will recover somewhat
- * gracefully - Jean II */
-
- if (priv->has_hostscan) {
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_SYMBOL:
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFHOSTSCAN_SYMBOL,
- HERMES_HOSTSCAN_SYMBOL_ONCE |
- HERMES_HOSTSCAN_SYMBOL_BCAST);
- break;
- case FIRMWARE_TYPE_INTERSIL: {
- __le16 req[3];
-
- req[0] = cpu_to_le16(0x3fff); /* All channels */
- req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */
- req[2] = 0; /* Any ESSID */
- err = HERMES_WRITE_RECORD(hw, USER_BAP,
- HERMES_RID_CNFHOSTSCAN, &req);
- }
- break;
- case FIRMWARE_TYPE_AGERE:
- if (priv->scan_mode & IW_SCAN_THIS_ESSID) {
- struct hermes_idstring idbuf;
- size_t len = min(sizeof(idbuf.val),
- (size_t) si->essid_len);
- idbuf.len = cpu_to_le16(len);
- memcpy(idbuf.val, si->essid, len);
-
- err = hermes_write_ltv(hw, USER_BAP,
- HERMES_RID_CNFSCANSSID_AGERE,
- HERMES_BYTES_TO_RECLEN(len + 2),
- &idbuf);
- } else
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFSCANSSID_AGERE,
- 0); /* Any ESSID */
- if (err)
- break;
-
- if (priv->has_ext_scan) {
- /* Clear scan results at the start of
- * an extended scan */
- orinoco_clear_scan_results(priv,
- msecs_to_jiffies(15000));
-
- /* TODO: Is this available on older firmware?
- * Can we use it to scan specific channels
- * for IW_SCAN_THIS_FREQ? */
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFSCANCHANNELS2GHZ,
- 0x7FFF);
- if (err)
- goto out;
-
- err = hermes_inquire(hw,
- HERMES_INQ_CHANNELINFO);
- } else
- err = hermes_inquire(hw, HERMES_INQ_SCAN);
- break;
- }
- } else
- err = hermes_inquire(hw, HERMES_INQ_SCAN);
-
- /* One more client */
- if (! err)
- priv->scan_inprogress = 1;
-
- out:
- orinoco_unlock(priv, &flags);
- return err;
-}
-
-#define MAX_CUSTOM_LEN 64
-
-/* Translate scan data returned from the card to a card independant
- * format that the Wireless Tools will understand - Jean II */
-static inline char *orinoco_translate_scan(struct net_device *dev,
- struct iw_request_info *info,
- char *current_ev,
- char *end_buf,
- union hermes_scan_info *bss,
- unsigned int last_scanned)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- u16 capabilities;
- u16 channel;
- struct iw_event iwe; /* Temporary buffer */
- char custom[MAX_CUSTOM_LEN];
-
- memset(&iwe, 0, sizeof(iwe));
-
- /* First entry *MUST* be the AP MAC address */
- iwe.cmd = SIOCGIWAP;
- iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
- memcpy(iwe.u.ap_addr.sa_data, bss->a.bssid, ETH_ALEN);
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_ADDR_LEN);
-
- /* Other entries will be displayed in the order we give them */
-
- /* Add the ESSID */
- iwe.u.data.length = le16_to_cpu(bss->a.essid_len);
- if (iwe.u.data.length > 32)
- iwe.u.data.length = 32;
- iwe.cmd = SIOCGIWESSID;
- iwe.u.data.flags = 1;
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, bss->a.essid);
-
- /* Add mode */
- iwe.cmd = SIOCGIWMODE;
- capabilities = le16_to_cpu(bss->a.capabilities);
- if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
- if (capabilities & WLAN_CAPABILITY_ESS)
- iwe.u.mode = IW_MODE_MASTER;
- else
- iwe.u.mode = IW_MODE_ADHOC;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_UINT_LEN);
- }
-
- channel = bss->s.channel;
- if ((channel >= 1) && (channel <= NUM_CHANNELS)) {
- /* Add channel and frequency */
- iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = channel;
- iwe.u.freq.e = 0;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_FREQ_LEN);
-
- iwe.u.freq.m = channel_frequency[channel-1] * 100000;
- iwe.u.freq.e = 1;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_FREQ_LEN);
- }
-
- /* Add quality statistics. level and noise in dB. No link quality */
- iwe.cmd = IWEVQUAL;
- iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID;
- iwe.u.qual.level = (__u8) le16_to_cpu(bss->a.level) - 0x95;
- iwe.u.qual.noise = (__u8) le16_to_cpu(bss->a.noise) - 0x95;
- /* Wireless tools prior to 27.pre22 will show link quality
- * anyway, so we provide a reasonable value. */
- if (iwe.u.qual.level > iwe.u.qual.noise)
- iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise;
- else
- iwe.u.qual.qual = 0;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_QUAL_LEN);
-
- /* Add encryption capability */
- iwe.cmd = SIOCGIWENCODE;
- if (capabilities & WLAN_CAPABILITY_PRIVACY)
- iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
- else
- iwe.u.data.flags = IW_ENCODE_DISABLED;
- iwe.u.data.length = 0;
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, NULL);
-
- /* Bit rate is not available in Lucent/Agere firmwares */
- if (priv->firmware_type != FIRMWARE_TYPE_AGERE) {
- char *current_val = current_ev + iwe_stream_lcp_len(info);
- int i;
- int step;
-
- if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)
- step = 2;
- else
- step = 1;
-
- iwe.cmd = SIOCGIWRATE;
- /* Those two flags are ignored... */
- iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
- /* Max 10 values */
- for (i = 0; i < 10; i += step) {
- /* NULL terminated */
- if (bss->p.rates[i] == 0x0)
- break;
- /* Bit rate given in 500 kb/s units (+ 0x80) */
- iwe.u.bitrate.value =
- ((bss->p.rates[i] & 0x7f) * 500000);
- current_val = iwe_stream_add_value(info, current_ev,
- current_val,
- end_buf, &iwe,
- IW_EV_PARAM_LEN);
- }
- /* Check if we added any event */
- if ((current_val - current_ev) > iwe_stream_lcp_len(info))
- current_ev = current_val;
- }
-
- /* Beacon interval */
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
- "bcn_int=%d",
- le16_to_cpu(bss->a.beacon_interv));
- if (iwe.u.data.length)
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, custom);
-
- /* Capabilites */
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
- "capab=0x%04x",
- capabilities);
- if (iwe.u.data.length)
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, custom);
-
- /* Add EXTRA: Age to display seconds since last beacon/probe response
- * for given network. */
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
- " Last beacon: %dms ago",
- jiffies_to_msecs(jiffies - last_scanned));
- if (iwe.u.data.length)
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, custom);
-
- return current_ev;
-}
-
-static inline char *orinoco_translate_ext_scan(struct net_device *dev,
- struct iw_request_info *info,
- char *current_ev,
- char *end_buf,
- struct agere_ext_scan_info *bss,
- unsigned int last_scanned)
-{
- u16 capabilities;
- u16 channel;
- struct iw_event iwe; /* Temporary buffer */
- char custom[MAX_CUSTOM_LEN];
- u8 *ie;
-
- memset(&iwe, 0, sizeof(iwe));
-
- /* First entry *MUST* be the AP MAC address */
- iwe.cmd = SIOCGIWAP;
- iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
- memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN);
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_ADDR_LEN);
-
- /* Other entries will be displayed in the order we give them */
-
- /* Add the ESSID */
- ie = bss->data;
- iwe.u.data.length = ie[1];
- if (iwe.u.data.length) {
- if (iwe.u.data.length > 32)
- iwe.u.data.length = 32;
- iwe.cmd = SIOCGIWESSID;
- iwe.u.data.flags = 1;
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, &ie[2]);
- }
-
- /* Add mode */
- capabilities = le16_to_cpu(bss->capabilities);
- if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
- iwe.cmd = SIOCGIWMODE;
- if (capabilities & WLAN_CAPABILITY_ESS)
- iwe.u.mode = IW_MODE_MASTER;
- else
- iwe.u.mode = IW_MODE_ADHOC;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_UINT_LEN);
- }
-
- ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_DS_PARAMS);
- channel = ie ? ie[2] : 0;
- if ((channel >= 1) && (channel <= NUM_CHANNELS)) {
- /* Add channel and frequency */
- iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = channel;
- iwe.u.freq.e = 0;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_FREQ_LEN);
-
- iwe.u.freq.m = channel_frequency[channel-1] * 100000;
- iwe.u.freq.e = 1;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_FREQ_LEN);
- }
-
- /* Add quality statistics. level and noise in dB. No link quality */
- iwe.cmd = IWEVQUAL;
- iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID;
- iwe.u.qual.level = bss->level - 0x95;
- iwe.u.qual.noise = bss->noise - 0x95;
- /* Wireless tools prior to 27.pre22 will show link quality
- * anyway, so we provide a reasonable value. */
- if (iwe.u.qual.level > iwe.u.qual.noise)
- iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise;
- else
- iwe.u.qual.qual = 0;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_QUAL_LEN);
-
- /* Add encryption capability */
- iwe.cmd = SIOCGIWENCODE;
- if (capabilities & WLAN_CAPABILITY_PRIVACY)
- iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
- else
- iwe.u.data.flags = IW_ENCODE_DISABLED;
- iwe.u.data.length = 0;
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, NULL);
-
- /* WPA IE */
- ie = orinoco_get_wpa_ie(bss->data, sizeof(bss->data));
- if (ie) {
- iwe.cmd = IWEVGENIE;
- iwe.u.data.length = ie[1] + 2;
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, ie);
- }
-
- /* RSN IE */
- ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_RSN);
- if (ie) {
- iwe.cmd = IWEVGENIE;
- iwe.u.data.length = ie[1] + 2;
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, ie);
- }
-
- ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_SUPP_RATES);
- if (ie) {
- char *p = current_ev + iwe_stream_lcp_len(info);
- int i;
-
- iwe.cmd = SIOCGIWRATE;
- /* Those two flags are ignored... */
- iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
-
- for (i = 2; i < (ie[1] + 2); i++) {
- iwe.u.bitrate.value = ((ie[i] & 0x7F) * 500000);
- p = iwe_stream_add_value(info, current_ev, p, end_buf,
- &iwe, IW_EV_PARAM_LEN);
- }
- /* Check if we added any event */
- if (p > (current_ev + iwe_stream_lcp_len(info)))
- current_ev = p;
- }
-
- /* Timestamp */
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length =
- snprintf(custom, MAX_CUSTOM_LEN, "tsf=%016llx",
- (unsigned long long) le64_to_cpu(bss->timestamp));
- if (iwe.u.data.length)
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, custom);
-
- /* Beacon interval */
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
- "bcn_int=%d",
- le16_to_cpu(bss->beacon_interval));
- if (iwe.u.data.length)
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, custom);
-
- /* Capabilites */
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
- "capab=0x%04x",
- capabilities);
- if (iwe.u.data.length)
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, custom);
-
- /* Add EXTRA: Age to display seconds since last beacon/probe response
- * for given network. */
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
- " Last beacon: %dms ago",
- jiffies_to_msecs(jiffies - last_scanned));
- if (iwe.u.data.length)
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, custom);
-
- return current_ev;
-}
-
-/* Return results of a scan */
-static int orinoco_ioctl_getscan(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *srq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int err = 0;
- unsigned long flags;
- char *current_ev = extra;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if (priv->scan_inprogress) {
- /* Important note : we don't want to block the caller
- * until results are ready for various reasons.
- * First, managing wait queues is complex and racy.
- * Second, we grab some rtnetlink lock before comming
- * here (in dev_ioctl()).
- * Third, we generate an Wireless Event, so the
- * caller can wait itself on that - Jean II */
- err = -EAGAIN;
- goto out;
- }
-
- if (priv->has_ext_scan) {
- struct xbss_element *bss;
-
- list_for_each_entry(bss, &priv->bss_list, list) {
- /* Translate this entry to WE format */
- current_ev =
- orinoco_translate_ext_scan(dev, info,
- current_ev,
- extra + srq->length,
- &bss->bss,
- bss->last_scanned);
-
- /* Check if there is space for one more entry */
- if ((extra + srq->length - current_ev)
- <= IW_EV_ADDR_LEN) {
- /* Ask user space to try again with a
- * bigger buffer */
- err = -E2BIG;
- goto out;
- }
- }
-
- } else {
- struct bss_element *bss;
-
- list_for_each_entry(bss, &priv->bss_list, list) {
- /* Translate this entry to WE format */
- current_ev = orinoco_translate_scan(dev, info,
- current_ev,
- extra + srq->length,
- &bss->bss,
- bss->last_scanned);
-
- /* Check if there is space for one more entry */
- if ((extra + srq->length - current_ev)
- <= IW_EV_ADDR_LEN) {
- /* Ask user space to try again with a
- * bigger buffer */
- err = -E2BIG;
- goto out;
- }
- }
- }
-
- srq->length = (current_ev - extra);
- srq->flags = (__u16) priv->scan_mode;
-
-out:
- orinoco_unlock(priv, &flags);
- return err;
-}
-
-/* Commit handler, called after set operations */
-static int orinoco_ioctl_commit(struct net_device *dev,
- struct iw_request_info *info,
- void *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct hermes *hw = &priv->hw;
- unsigned long flags;
- int err = 0;
-
- if (!priv->open)
- return 0;
-
- if (priv->broken_disableport) {
- orinoco_reset(&priv->reset_work);
- return 0;
- }
-
- if (orinoco_lock(priv, &flags) != 0)
- return err;
-
- err = hermes_disable_port(hw, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to disable port "
- "while reconfiguring card\n", dev->name);
- priv->broken_disableport = 1;
- goto out;
- }
-
- err = __orinoco_program_rids(dev);
- if (err) {
- printk(KERN_WARNING "%s: Unable to reconfigure card\n",
- dev->name);
- goto out;
- }
-
- err = hermes_enable_port(hw, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
- dev->name);
- goto out;
- }
-
- out:
- if (err) {
- printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
- schedule_work(&priv->reset_work);
- err = 0;
- }
-
- orinoco_unlock(priv, &flags);
- return err;
-}
-
-static const struct iw_priv_args orinoco_privtab[] = {
- { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" },
- { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" },
- { SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- 0, "set_port3" },
- { SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_port3" },
- { SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- 0, "set_preamble" },
- { SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_preamble" },
- { SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- 0, "set_ibssport" },
- { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_ibssport" },
- { SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN,
- "get_rid" },
-};
-
-
-/*
- * Structures to export the Wireless Handlers
- */
-
-#define STD_IW_HANDLER(id, func) \
- [IW_IOCTL_IDX(id)] = (iw_handler) func
-static const iw_handler orinoco_handler[] = {
- STD_IW_HANDLER(SIOCSIWCOMMIT, orinoco_ioctl_commit),
- STD_IW_HANDLER(SIOCGIWNAME, orinoco_ioctl_getname),
- STD_IW_HANDLER(SIOCSIWFREQ, orinoco_ioctl_setfreq),
- STD_IW_HANDLER(SIOCGIWFREQ, orinoco_ioctl_getfreq),
- STD_IW_HANDLER(SIOCSIWMODE, orinoco_ioctl_setmode),
- STD_IW_HANDLER(SIOCGIWMODE, orinoco_ioctl_getmode),
- STD_IW_HANDLER(SIOCSIWSENS, orinoco_ioctl_setsens),
- STD_IW_HANDLER(SIOCGIWSENS, orinoco_ioctl_getsens),
- STD_IW_HANDLER(SIOCGIWRANGE, orinoco_ioctl_getiwrange),
- STD_IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy),
- STD_IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy),
- STD_IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy),
- STD_IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy),
- STD_IW_HANDLER(SIOCSIWAP, orinoco_ioctl_setwap),
- STD_IW_HANDLER(SIOCGIWAP, orinoco_ioctl_getwap),
- STD_IW_HANDLER(SIOCSIWSCAN, orinoco_ioctl_setscan),
- STD_IW_HANDLER(SIOCGIWSCAN, orinoco_ioctl_getscan),
- STD_IW_HANDLER(SIOCSIWESSID, orinoco_ioctl_setessid),
- STD_IW_HANDLER(SIOCGIWESSID, orinoco_ioctl_getessid),
- STD_IW_HANDLER(SIOCSIWNICKN, orinoco_ioctl_setnick),
- STD_IW_HANDLER(SIOCGIWNICKN, orinoco_ioctl_getnick),
- STD_IW_HANDLER(SIOCSIWRATE, orinoco_ioctl_setrate),
- STD_IW_HANDLER(SIOCGIWRATE, orinoco_ioctl_getrate),
- STD_IW_HANDLER(SIOCSIWRTS, orinoco_ioctl_setrts),
- STD_IW_HANDLER(SIOCGIWRTS, orinoco_ioctl_getrts),
- STD_IW_HANDLER(SIOCSIWFRAG, orinoco_ioctl_setfrag),
- STD_IW_HANDLER(SIOCGIWFRAG, orinoco_ioctl_getfrag),
- STD_IW_HANDLER(SIOCGIWRETRY, orinoco_ioctl_getretry),
- STD_IW_HANDLER(SIOCSIWENCODE, orinoco_ioctl_setiwencode),
- STD_IW_HANDLER(SIOCGIWENCODE, orinoco_ioctl_getiwencode),
- STD_IW_HANDLER(SIOCSIWPOWER, orinoco_ioctl_setpower),
- STD_IW_HANDLER(SIOCGIWPOWER, orinoco_ioctl_getpower),
- STD_IW_HANDLER(SIOCSIWGENIE, orinoco_ioctl_set_genie),
- STD_IW_HANDLER(SIOCGIWGENIE, orinoco_ioctl_get_genie),
- STD_IW_HANDLER(SIOCSIWMLME, orinoco_ioctl_set_mlme),
- STD_IW_HANDLER(SIOCSIWAUTH, orinoco_ioctl_set_auth),
- STD_IW_HANDLER(SIOCGIWAUTH, orinoco_ioctl_get_auth),
- STD_IW_HANDLER(SIOCSIWENCODEEXT, orinoco_ioctl_set_encodeext),
- STD_IW_HANDLER(SIOCGIWENCODEEXT, orinoco_ioctl_get_encodeext),
-};
-
-
-/*
- Added typecasting since we no longer use iwreq_data -- Moustafa
- */
-static const iw_handler orinoco_private_handler[] = {
- [0] = (iw_handler) orinoco_ioctl_reset,
- [1] = (iw_handler) orinoco_ioctl_reset,
- [2] = (iw_handler) orinoco_ioctl_setport3,
- [3] = (iw_handler) orinoco_ioctl_getport3,
- [4] = (iw_handler) orinoco_ioctl_setpreamble,
- [5] = (iw_handler) orinoco_ioctl_getpreamble,
- [6] = (iw_handler) orinoco_ioctl_setibssport,
- [7] = (iw_handler) orinoco_ioctl_getibssport,
- [9] = (iw_handler) orinoco_ioctl_getrid,
-};
-
-static const struct iw_handler_def orinoco_handler_def = {
- .num_standard = ARRAY_SIZE(orinoco_handler),
- .num_private = ARRAY_SIZE(orinoco_private_handler),
- .num_private_args = ARRAY_SIZE(orinoco_privtab),
- .standard = orinoco_handler,
- .private = orinoco_private_handler,
- .private_args = orinoco_privtab,
- .get_wireless_stats = orinoco_get_wireless_stats,
-};
-
-static void orinoco_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- struct orinoco_private *priv = netdev_priv(dev);
-
- strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1);
- strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1);
- strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1);
- if (dev->dev.parent)
- strncpy(info->bus_info, dev->dev.parent->bus_id,
- sizeof(info->bus_info) - 1);
- else
- snprintf(info->bus_info, sizeof(info->bus_info) - 1,
- "PCMCIA %p", priv->hw.iobase);
-}
-
-static const struct ethtool_ops orinoco_ethtool_ops = {
- .get_drvinfo = orinoco_get_drvinfo,
- .get_link = ethtool_op_get_link,
-};
-
-/********************************************************************/
-/* Module initialization */
-/********************************************************************/
-
-EXPORT_SYMBOL(alloc_orinocodev);
-EXPORT_SYMBOL(free_orinocodev);
-
-EXPORT_SYMBOL(__orinoco_up);
-EXPORT_SYMBOL(__orinoco_down);
-EXPORT_SYMBOL(orinoco_reinit_firmware);
-
-EXPORT_SYMBOL(orinoco_interrupt);
-
-/* Can't be declared "const" or the whole __initdata section will
- * become const */
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
- " (David Gibson <hermes@gibson.dropbear.id.au>, "
- "Pavel Roskin <proski@gnu.org>, et al)";
-
-static int __init init_orinoco(void)
-{
- printk(KERN_DEBUG "%s\n", version);
- return 0;
-}
-
-static void __exit exit_orinoco(void)
-{
-}
-
-module_init(init_orinoco);
-module_exit(exit_orinoco);
+++ /dev/null
-/* orinoco.h
- *
- * Common definitions to all pieces of the various orinoco
- * drivers
- */
-
-#ifndef _ORINOCO_H
-#define _ORINOCO_H
-
-#define DRIVER_VERSION "0.15"
-
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-
-#include "hermes.h"
-
-/* To enable debug messages */
-//#define ORINOCO_DEBUG 3
-
-#define WIRELESS_SPY // enable iwspy support
-
-#define MAX_SCAN_LEN 4096
-
-#define ORINOCO_MAX_KEY_SIZE 14
-#define ORINOCO_MAX_KEYS 4
-
-struct orinoco_key {
- __le16 len; /* always stored as little-endian */
- char data[ORINOCO_MAX_KEY_SIZE];
-} __attribute__ ((packed));
-
-#define TKIP_KEYLEN 16
-#define MIC_KEYLEN 8
-
-struct orinoco_tkip_key {
- u8 tkip[TKIP_KEYLEN];
- u8 tx_mic[MIC_KEYLEN];
- u8 rx_mic[MIC_KEYLEN];
-};
-
-typedef enum {
- FIRMWARE_TYPE_AGERE,
- FIRMWARE_TYPE_INTERSIL,
- FIRMWARE_TYPE_SYMBOL
-} fwtype_t;
-
-struct bss_element {
- union hermes_scan_info bss;
- unsigned long last_scanned;
- struct list_head list;
-};
-
-struct xbss_element {
- struct agere_ext_scan_info bss;
- unsigned long last_scanned;
- struct list_head list;
-};
-
-struct hermes_rx_descriptor;
-
-struct orinoco_rx_data {
- struct hermes_rx_descriptor *desc;
- struct sk_buff *skb;
- struct list_head list;
-};
-
-struct firmware;
-
-struct orinoco_private {
- void *card; /* Pointer to card dependent structure */
- struct device *dev;
- int (*hard_reset)(struct orinoco_private *);
- int (*stop_fw)(struct orinoco_private *, int);
-
- /* Synchronisation stuff */
- spinlock_t lock;
- int hw_unavailable;
- struct work_struct reset_work;
-
- /* Interrupt tasklets */
- struct tasklet_struct rx_tasklet;
- struct list_head rx_list;
- struct orinoco_rx_data *rx_data;
-
- /* driver state */
- int open;
- u16 last_linkstatus;
- struct work_struct join_work;
- struct work_struct wevent_work;
-
- /* Net device stuff */
- struct net_device *ndev;
- struct net_device_stats stats;
- struct iw_statistics wstats;
-
- /* Hardware control variables */
- hermes_t hw;
- u16 txfid;
-
- /* Capabilities of the hardware/firmware */
- fwtype_t firmware_type;
- char fw_name[32];
- int ibss_port;
- int nicbuf_size;
- u16 channel_mask;
-
- /* Boolean capabilities */
- unsigned int has_ibss:1;
- unsigned int has_port3:1;
- unsigned int has_wep:1;
- unsigned int has_big_wep:1;
- unsigned int has_mwo:1;
- unsigned int has_pm:1;
- unsigned int has_preamble:1;
- unsigned int has_sensitivity:1;
- unsigned int has_hostscan:1;
- unsigned int has_alt_txcntl:1;
- unsigned int has_ext_scan:1;
- unsigned int has_wpa:1;
- unsigned int do_fw_download:1;
- unsigned int broken_disableport:1;
- unsigned int broken_monitor:1;
-
- /* Configuration paramaters */
- u32 iw_mode;
- int prefer_port3;
- u16 encode_alg, wep_restrict, tx_key;
- struct orinoco_key keys[ORINOCO_MAX_KEYS];
- int bitratemode;
- char nick[IW_ESSID_MAX_SIZE+1];
- char desired_essid[IW_ESSID_MAX_SIZE+1];
- char desired_bssid[ETH_ALEN];
- int bssid_fixed;
- u16 frag_thresh, mwo_robust;
- u16 channel;
- u16 ap_density, rts_thresh;
- u16 pm_on, pm_mcast, pm_period, pm_timeout;
- u16 preamble;
-#ifdef WIRELESS_SPY
- struct iw_spy_data spy_data; /* iwspy support */
- struct iw_public_data wireless_data;
-#endif
-
- /* Configuration dependent variables */
- int port_type, createibss;
- int promiscuous, mc_count;
-
- /* Scanning support */
- struct list_head bss_list;
- struct list_head bss_free_list;
- void *bss_xbss_data;
-
- int scan_inprogress; /* Scan pending... */
- u32 scan_mode; /* Type of scan done */
-
- /* WPA support */
- u8 *wpa_ie;
- int wpa_ie_len;
-
- struct orinoco_tkip_key tkip_key[ORINOCO_MAX_KEYS];
- struct crypto_hash *rx_tfm_mic;
- struct crypto_hash *tx_tfm_mic;
-
- unsigned int wpa_enabled:1;
- unsigned int tkip_cm_active:1;
- unsigned int key_mgmt:3;
-
- /* Cached in memory firmware to use in ->resume */
- const struct firmware *cached_fw;
-};
-
-#ifdef ORINOCO_DEBUG
-extern int orinoco_debug;
-#define DEBUG(n, args...) do { if (orinoco_debug>(n)) printk(KERN_DEBUG args); } while(0)
-#else
-#define DEBUG(n, args...) do { } while (0)
-#endif /* ORINOCO_DEBUG */
-
-/********************************************************************/
-/* Exported prototypes */
-/********************************************************************/
-
-extern struct net_device *alloc_orinocodev(
- int sizeof_card, struct device *device,
- int (*hard_reset)(struct orinoco_private *),
- int (*stop_fw)(struct orinoco_private *, int));
-extern void free_orinocodev(struct net_device *dev);
-extern int __orinoco_up(struct net_device *dev);
-extern int __orinoco_down(struct net_device *dev);
-extern int orinoco_reinit_firmware(struct net_device *dev);
-extern irqreturn_t orinoco_interrupt(int irq, void * dev_id);
-
-/********************************************************************/
-/* Locking and synchronization functions */
-/********************************************************************/
-
-static inline int orinoco_lock(struct orinoco_private *priv,
- unsigned long *flags)
-{
- spin_lock_irqsave(&priv->lock, *flags);
- if (priv->hw_unavailable) {
- DEBUG(1, "orinoco_lock() called with hw_unavailable (dev=%p)\n",
- priv->ndev);
- spin_unlock_irqrestore(&priv->lock, *flags);
- return -EBUSY;
- }
- return 0;
-}
-
-static inline void orinoco_unlock(struct orinoco_private *priv,
- unsigned long *flags)
-{
- spin_unlock_irqrestore(&priv->lock, *flags);
-}
-
-#endif /* _ORINOCO_H */
--- /dev/null
+#
+# Makefile for the orinoco wireless device drivers.
+#
+
+obj-$(CONFIG_HERMES) += orinoco.o hermes.o hermes_dld.o
+obj-$(CONFIG_PCMCIA_HERMES) += orinoco_cs.o
+obj-$(CONFIG_APPLE_AIRPORT) += airport.o
+obj-$(CONFIG_PLX_HERMES) += orinoco_plx.o
+obj-$(CONFIG_PCI_HERMES) += orinoco_pci.o
+obj-$(CONFIG_TMD_HERMES) += orinoco_tmd.o
+obj-$(CONFIG_NORTEL_HERMES) += orinoco_nortel.o
+obj-$(CONFIG_PCMCIA_SPECTRUM) += spectrum_cs.o
--- /dev/null
+/* airport.c
+ *
+ * A driver for "Hermes" chipset based Apple Airport wireless
+ * card.
+ *
+ * Copyright notice & release notes in file orinoco.c
+ *
+ * Note specific to airport stub:
+ *
+ * 0.05 : first version of the new split driver
+ * 0.06 : fix possible hang on powerup, add sleep support
+ */
+
+#define DRIVER_NAME "airport"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <asm/pmac_feature.h>
+
+#include "orinoco.h"
+
+#define AIRPORT_IO_LEN (0x1000) /* one page */
+
+struct airport {
+ struct macio_dev *mdev;
+ void __iomem *vaddr;
+ int irq_requested;
+ int ndev_registered;
+};
+
+static int
+airport_suspend(struct macio_dev *mdev, pm_message_t state)
+{
+ struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev);
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+ int err;
+
+ printk(KERN_DEBUG "%s: Airport entering sleep mode\n", dev->name);
+
+ err = orinoco_lock(priv, &flags);
+ if (err) {
+ printk(KERN_ERR "%s: hw_unavailable on PBOOK_SLEEP_NOW\n",
+ dev->name);
+ return 0;
+ }
+
+ err = __orinoco_down(dev);
+ if (err)
+ printk(KERN_WARNING "%s: PBOOK_SLEEP_NOW: Error %d downing interface\n",
+ dev->name, err);
+
+ netif_device_detach(dev);
+
+ priv->hw_unavailable++;
+
+ orinoco_unlock(priv, &flags);
+
+ disable_irq(dev->irq);
+ pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0);
+
+ return 0;
+}
+
+static int
+airport_resume(struct macio_dev *mdev)
+{
+ struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev);
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+ int err;
+
+ printk(KERN_DEBUG "%s: Airport waking up\n", dev->name);
+
+ pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1);
+ msleep(200);
+
+ enable_irq(dev->irq);
+
+ err = orinoco_reinit_firmware(dev);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d re-initializing firmware on PBOOK_WAKE\n",
+ dev->name, err);
+ return 0;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ netif_device_attach(dev);
+
+ priv->hw_unavailable--;
+
+ if (priv->open && (! priv->hw_unavailable)) {
+ err = __orinoco_up(dev);
+ if (err)
+ printk(KERN_ERR "%s: Error %d restarting card on PBOOK_WAKE\n",
+ dev->name, err);
+ }
+
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int
+airport_detach(struct macio_dev *mdev)
+{
+ struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev);
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct airport *card = priv->card;
+
+ if (card->ndev_registered)
+ unregister_netdev(dev);
+ card->ndev_registered = 0;
+
+ if (card->irq_requested)
+ free_irq(dev->irq, dev);
+ card->irq_requested = 0;
+
+ if (card->vaddr)
+ iounmap(card->vaddr);
+ card->vaddr = NULL;
+
+ macio_release_resource(mdev, 0);
+
+ pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0);
+ ssleep(1);
+
+ macio_set_drvdata(mdev, NULL);
+ free_orinocodev(dev);
+
+ return 0;
+}
+
+static int airport_hard_reset(struct orinoco_private *priv)
+{
+ /* It would be nice to power cycle the Airport for a real hard
+ * reset, but for some reason although it appears to
+ * re-initialize properly, it falls in a screaming heap
+ * shortly afterwards. */
+#if 0
+ struct net_device *dev = priv->ndev;
+ struct airport *card = priv->card;
+
+ /* Vitally important. If we don't do this it seems we get an
+ * interrupt somewhere during the power cycle, since
+ * hw_unavailable is already set it doesn't get ACKed, we get
+ * into an interrupt loop and the PMU decides to turn us
+ * off. */
+ disable_irq(dev->irq);
+
+ pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 0);
+ ssleep(1);
+ pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 1);
+ ssleep(1);
+
+ enable_irq(dev->irq);
+ ssleep(1);
+#endif
+
+ return 0;
+}
+
+static int
+airport_attach(struct macio_dev *mdev, const struct of_device_id *match)
+{
+ struct orinoco_private *priv;
+ struct net_device *dev;
+ struct airport *card;
+ unsigned long phys_addr;
+ hermes_t *hw;
+
+ if (macio_resource_count(mdev) < 1 || macio_irq_count(mdev) < 1) {
+ printk(KERN_ERR PFX "Wrong interrupt/addresses in OF tree\n");
+ return -ENODEV;
+ }
+
+ /* Allocate space for private device-specific data */
+ dev = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev,
+ airport_hard_reset, NULL);
+ if (! dev) {
+ printk(KERN_ERR PFX "Cannot allocate network device\n");
+ return -ENODEV;
+ }
+ priv = netdev_priv(dev);
+ card = priv->card;
+
+ hw = &priv->hw;
+ card->mdev = mdev;
+
+ if (macio_request_resource(mdev, 0, "airport")) {
+ printk(KERN_ERR PFX "can't request IO resource !\n");
+ free_orinocodev(dev);
+ return -EBUSY;
+ }
+
+ SET_NETDEV_DEV(dev, &mdev->ofdev.dev);
+
+ macio_set_drvdata(mdev, dev);
+
+ /* Setup interrupts & base address */
+ dev->irq = macio_irq(mdev, 0);
+ phys_addr = macio_resource_start(mdev, 0); /* Physical address */
+ printk(KERN_DEBUG PFX "Physical address %lx\n", phys_addr);
+ dev->base_addr = phys_addr;
+ card->vaddr = ioremap(phys_addr, AIRPORT_IO_LEN);
+ if (!card->vaddr) {
+ printk(KERN_ERR PFX "ioremap() failed\n");
+ goto failed;
+ }
+
+ hermes_struct_init(hw, card->vaddr, HERMES_16BIT_REGSPACING);
+
+ /* Power up card */
+ pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1);
+ ssleep(1);
+
+ /* Reset it before we get the interrupt */
+ hermes_init(hw);
+
+ if (request_irq(dev->irq, orinoco_interrupt, 0, dev->name, dev)) {
+ printk(KERN_ERR PFX "Couldn't get IRQ %d\n", dev->irq);
+ goto failed;
+ }
+ card->irq_requested = 1;
+
+ /* Tell the stack we exist */
+ if (register_netdev(dev) != 0) {
+ printk(KERN_ERR PFX "register_netdev() failed\n");
+ goto failed;
+ }
+ printk(KERN_DEBUG PFX "Card registered for interface %s\n", dev->name);
+ card->ndev_registered = 1;
+ return 0;
+ failed:
+ airport_detach(mdev);
+ return -ENODEV;
+} /* airport_attach */
+
+
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (Benjamin Herrenschmidt <benh@kernel.crashing.org>)";
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("Driver for the Apple Airport wireless card.");
+MODULE_LICENSE("Dual MPL/GPL");
+
+static struct of_device_id airport_match[] =
+{
+ {
+ .name = "radio",
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE (of, airport_match);
+
+static struct macio_driver airport_driver =
+{
+ .name = DRIVER_NAME,
+ .match_table = airport_match,
+ .probe = airport_attach,
+ .remove = airport_detach,
+ .suspend = airport_suspend,
+ .resume = airport_resume,
+};
+
+static int __init
+init_airport(void)
+{
+ printk(KERN_DEBUG "%s\n", version);
+
+ return macio_register_driver(&airport_driver);
+}
+
+static void __exit
+exit_airport(void)
+{
+ return macio_unregister_driver(&airport_driver);
+}
+
+module_init(init_airport);
+module_exit(exit_airport);
--- /dev/null
+/* hermes.c
+ *
+ * Driver core for the "Hermes" wireless MAC controller, as used in
+ * the Lucent Orinoco and Cabletron RoamAbout cards. It should also
+ * work on the hfa3841 and hfa3842 MAC controller chips used in the
+ * Prism II chipsets.
+ *
+ * This is not a complete driver, just low-level access routines for
+ * the MAC controller itself.
+ *
+ * Based on the prism2 driver from Absolute Value Systems' linux-wlan
+ * project, the Linux wvlan_cs driver, Lucent's HCF-Light
+ * (wvlan_hcf.c) library, and the NetBSD wireless driver (in no
+ * particular order).
+ *
+ * Copyright (C) 2000, David Gibson, Linuxcare Australia.
+ * (C) Copyright David Gibson, IBM Corp. 2001-2003.
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include "hermes.h"
+
+MODULE_DESCRIPTION("Low-level driver helper for Lucent Hermes chipset and Prism II HFA384x wireless MAC controller");
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>"
+ " & David Gibson <hermes@gibson.dropbear.id.au>");
+MODULE_LICENSE("Dual MPL/GPL");
+
+/* These are maximum timeouts. Most often, card wil react much faster */
+#define CMD_BUSY_TIMEOUT (100) /* In iterations of ~1us */
+#define CMD_INIT_TIMEOUT (50000) /* in iterations of ~10us */
+#define CMD_COMPL_TIMEOUT (20000) /* in iterations of ~10us */
+#define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */
+
+/*
+ * Debugging helpers
+ */
+
+#define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \
+ printk(stuff);} while (0)
+
+#undef HERMES_DEBUG
+#ifdef HERMES_DEBUG
+#include <stdarg.h>
+
+#define DEBUG(lvl, stuff...) if ( (lvl) <= HERMES_DEBUG) DMSG(stuff)
+
+#else /* ! HERMES_DEBUG */
+
+#define DEBUG(lvl, stuff...) do { } while (0)
+
+#endif /* ! HERMES_DEBUG */
+
+
+/*
+ * Internal functions
+ */
+
+/* Issue a command to the chip. Waiting for it to complete is the caller's
+ problem.
+
+ Returns -EBUSY if the command register is busy, 0 on success.
+
+ Callable from any context.
+*/
+static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0,
+ u16 param1, u16 param2)
+{
+ int k = CMD_BUSY_TIMEOUT;
+ u16 reg;
+
+ /* First wait for the command register to unbusy */
+ reg = hermes_read_regn(hw, CMD);
+ while ( (reg & HERMES_CMD_BUSY) && k ) {
+ k--;
+ udelay(1);
+ reg = hermes_read_regn(hw, CMD);
+ }
+ if (reg & HERMES_CMD_BUSY) {
+ return -EBUSY;
+ }
+
+ hermes_write_regn(hw, PARAM2, param2);
+ hermes_write_regn(hw, PARAM1, param1);
+ hermes_write_regn(hw, PARAM0, param0);
+ hermes_write_regn(hw, CMD, cmd);
+
+ return 0;
+}
+
+/*
+ * Function definitions
+ */
+
+/* For doing cmds that wipe the magic constant in SWSUPPORT0 */
+int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
+ u16 parm0, u16 parm1, u16 parm2,
+ struct hermes_response *resp)
+{
+ int err = 0;
+ int k;
+ u16 status, reg;
+
+ err = hermes_issue_cmd(hw, cmd, parm0, parm1, parm2);
+ if (err)
+ return err;
+
+ reg = hermes_read_regn(hw, EVSTAT);
+ k = CMD_INIT_TIMEOUT;
+ while ((!(reg & HERMES_EV_CMD)) && k) {
+ k--;
+ udelay(10);
+ reg = hermes_read_regn(hw, EVSTAT);
+ }
+
+ hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC);
+
+ if (!hermes_present(hw)) {
+ DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n",
+ hw->iobase);
+ err = -ENODEV;
+ goto out;
+ }
+
+ if (!(reg & HERMES_EV_CMD)) {
+ printk(KERN_ERR "hermes @ %p: "
+ "Timeout waiting for card to reset (reg=0x%04x)!\n",
+ hw->iobase, reg);
+ err = -ETIMEDOUT;
+ goto out;
+ }
+
+ status = hermes_read_regn(hw, STATUS);
+ if (resp) {
+ resp->status = status;
+ resp->resp0 = hermes_read_regn(hw, RESP0);
+ resp->resp1 = hermes_read_regn(hw, RESP1);
+ resp->resp2 = hermes_read_regn(hw, RESP2);
+ }
+
+ hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
+
+ if (status & HERMES_STATUS_RESULT)
+ err = -EIO;
+out:
+ return err;
+}
+EXPORT_SYMBOL(hermes_doicmd_wait);
+
+void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing)
+{
+ hw->iobase = address;
+ hw->reg_spacing = reg_spacing;
+ hw->inten = 0x0;
+}
+EXPORT_SYMBOL(hermes_struct_init);
+
+int hermes_init(hermes_t *hw)
+{
+ u16 reg;
+ int err = 0;
+ int k;
+
+ /* We don't want to be interrupted while resetting the chipset */
+ hw->inten = 0x0;
+ hermes_write_regn(hw, INTEN, 0);
+ hermes_write_regn(hw, EVACK, 0xffff);
+
+ /* Normally it's a "can't happen" for the command register to
+ be busy when we go to issue a command because we are
+ serializing all commands. However we want to have some
+ chance of resetting the card even if it gets into a stupid
+ state, so we actually wait to see if the command register
+ will unbusy itself here. */
+ k = CMD_BUSY_TIMEOUT;
+ reg = hermes_read_regn(hw, CMD);
+ while (k && (reg & HERMES_CMD_BUSY)) {
+ if (reg == 0xffff) /* Special case - the card has probably been removed,
+ so don't wait for the timeout */
+ return -ENODEV;
+
+ k--;
+ udelay(1);
+ reg = hermes_read_regn(hw, CMD);
+ }
+
+ /* No need to explicitly handle the timeout - if we've timed
+ out hermes_issue_cmd() will probably return -EBUSY below */
+
+ /* According to the documentation, EVSTAT may contain
+ obsolete event occurrence information. We have to acknowledge
+ it by writing EVACK. */
+ reg = hermes_read_regn(hw, EVSTAT);
+ hermes_write_regn(hw, EVACK, reg);
+
+ /* We don't use hermes_docmd_wait here, because the reset wipes
+ the magic constant in SWSUPPORT0 away, and it gets confused */
+ err = hermes_doicmd_wait(hw, HERMES_CMD_INIT, 0, 0, 0, NULL);
+
+ return err;
+}
+EXPORT_SYMBOL(hermes_init);
+
+/* Issue a command to the chip, and (busy!) wait for it to
+ * complete.
+ *
+ * Returns: < 0 on internal error, 0 on success, > 0 on error returned by the firmware
+ *
+ * Callable from any context, but locking is your problem. */
+int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
+ struct hermes_response *resp)
+{
+ int err;
+ int k;
+ u16 reg;
+ u16 status;
+
+ err = hermes_issue_cmd(hw, cmd, parm0, 0, 0);
+ if (err) {
+ if (! hermes_present(hw)) {
+ if (net_ratelimit())
+ printk(KERN_WARNING "hermes @ %p: "
+ "Card removed while issuing command "
+ "0x%04x.\n", hw->iobase, cmd);
+ err = -ENODEV;
+ } else
+ if (net_ratelimit())
+ printk(KERN_ERR "hermes @ %p: "
+ "Error %d issuing command 0x%04x.\n",
+ hw->iobase, err, cmd);
+ goto out;
+ }
+
+ reg = hermes_read_regn(hw, EVSTAT);
+ k = CMD_COMPL_TIMEOUT;
+ while ( (! (reg & HERMES_EV_CMD)) && k) {
+ k--;
+ udelay(10);
+ reg = hermes_read_regn(hw, EVSTAT);
+ }
+
+ if (! hermes_present(hw)) {
+ printk(KERN_WARNING "hermes @ %p: Card removed "
+ "while waiting for command 0x%04x completion.\n",
+ hw->iobase, cmd);
+ err = -ENODEV;
+ goto out;
+ }
+
+ if (! (reg & HERMES_EV_CMD)) {
+ printk(KERN_ERR "hermes @ %p: Timeout waiting for "
+ "command 0x%04x completion.\n", hw->iobase, cmd);
+ err = -ETIMEDOUT;
+ goto out;
+ }
+
+ status = hermes_read_regn(hw, STATUS);
+ if (resp) {
+ resp->status = status;
+ resp->resp0 = hermes_read_regn(hw, RESP0);
+ resp->resp1 = hermes_read_regn(hw, RESP1);
+ resp->resp2 = hermes_read_regn(hw, RESP2);
+ }
+
+ hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
+
+ if (status & HERMES_STATUS_RESULT)
+ err = -EIO;
+
+ out:
+ return err;
+}
+EXPORT_SYMBOL(hermes_docmd_wait);
+
+int hermes_allocate(hermes_t *hw, u16 size, u16 *fid)
+{
+ int err = 0;
+ int k;
+ u16 reg;
+
+ if ( (size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX) )
+ return -EINVAL;
+
+ err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL);
+ if (err) {
+ return err;
+ }
+
+ reg = hermes_read_regn(hw, EVSTAT);
+ k = ALLOC_COMPL_TIMEOUT;
+ while ( (! (reg & HERMES_EV_ALLOC)) && k) {
+ k--;
+ udelay(10);
+ reg = hermes_read_regn(hw, EVSTAT);
+ }
+
+ if (! hermes_present(hw)) {
+ printk(KERN_WARNING "hermes @ %p: "
+ "Card removed waiting for frame allocation.\n",
+ hw->iobase);
+ return -ENODEV;
+ }
+
+ if (! (reg & HERMES_EV_ALLOC)) {
+ printk(KERN_ERR "hermes @ %p: "
+ "Timeout waiting for frame allocation\n",
+ hw->iobase);
+ return -ETIMEDOUT;
+ }
+
+ *fid = hermes_read_regn(hw, ALLOCFID);
+ hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC);
+
+ return 0;
+}
+EXPORT_SYMBOL(hermes_allocate);
+
+/* Set up a BAP to read a particular chunk of data from card's internal buffer.
+ *
+ * Returns: < 0 on internal failure (errno), 0 on success, >0 on error
+ * from firmware
+ *
+ * Callable from any context */
+static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
+{
+ int sreg = bap ? HERMES_SELECT1 : HERMES_SELECT0;
+ int oreg = bap ? HERMES_OFFSET1 : HERMES_OFFSET0;
+ int k;
+ u16 reg;
+
+ /* Paranoia.. */
+ if ( (offset > HERMES_BAP_OFFSET_MAX) || (offset % 2) )
+ return -EINVAL;
+
+ k = HERMES_BAP_BUSY_TIMEOUT;
+ reg = hermes_read_reg(hw, oreg);
+ while ((reg & HERMES_OFFSET_BUSY) && k) {
+ k--;
+ udelay(1);
+ reg = hermes_read_reg(hw, oreg);
+ }
+
+ if (reg & HERMES_OFFSET_BUSY)
+ return -ETIMEDOUT;
+
+ /* Now we actually set up the transfer */
+ hermes_write_reg(hw, sreg, id);
+ hermes_write_reg(hw, oreg, offset);
+
+ /* Wait for the BAP to be ready */
+ k = HERMES_BAP_BUSY_TIMEOUT;
+ reg = hermes_read_reg(hw, oreg);
+ while ( (reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) {
+ k--;
+ udelay(1);
+ reg = hermes_read_reg(hw, oreg);
+ }
+
+ if (reg != offset) {
+ printk(KERN_ERR "hermes @ %p: BAP%d offset %s: "
+ "reg=0x%x id=0x%x offset=0x%x\n", hw->iobase, bap,
+ (reg & HERMES_OFFSET_BUSY) ? "timeout" : "error",
+ reg, id, offset);
+
+ if (reg & HERMES_OFFSET_BUSY) {
+ return -ETIMEDOUT;
+ }
+
+ return -EIO; /* error or wrong offset */
+ }
+
+ return 0;
+}
+
+/* Read a block of data from the chip's buffer, via the
+ * BAP. Synchronization/serialization is the caller's problem. len
+ * must be even.
+ *
+ * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
+ */
+int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
+ u16 id, u16 offset)
+{
+ int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
+ int err = 0;
+
+ if ( (len < 0) || (len % 2) )
+ return -EINVAL;
+
+ err = hermes_bap_seek(hw, bap, id, offset);
+ if (err)
+ goto out;
+
+ /* Actually do the transfer */
+ hermes_read_words(hw, dreg, buf, len/2);
+
+ out:
+ return err;
+}
+EXPORT_SYMBOL(hermes_bap_pread);
+
+/* Write a block of data to the chip's buffer, via the
+ * BAP. Synchronization/serialization is the caller's problem.
+ *
+ * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
+ */
+int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
+ u16 id, u16 offset)
+{
+ int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
+ int err = 0;
+
+ if (len < 0)
+ return -EINVAL;
+
+ err = hermes_bap_seek(hw, bap, id, offset);
+ if (err)
+ goto out;
+
+ /* Actually do the transfer */
+ hermes_write_bytes(hw, dreg, buf, len);
+
+ out:
+ return err;
+}
+EXPORT_SYMBOL(hermes_bap_pwrite);
+
+/* Read a Length-Type-Value record from the card.
+ *
+ * If length is NULL, we ignore the length read from the card, and
+ * read the entire buffer regardless. This is useful because some of
+ * the configuration records appear to have incorrect lengths in
+ * practice.
+ *
+ * Callable from user or bh context. */
+int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize,
+ u16 *length, void *buf)
+{
+ int err = 0;
+ int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
+ u16 rlength, rtype;
+ unsigned nwords;
+
+ if ( (bufsize < 0) || (bufsize % 2) )
+ return -EINVAL;
+
+ err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL);
+ if (err)
+ return err;
+
+ err = hermes_bap_seek(hw, bap, rid, 0);
+ if (err)
+ return err;
+
+ rlength = hermes_read_reg(hw, dreg);
+
+ if (! rlength)
+ return -ENODATA;
+
+ rtype = hermes_read_reg(hw, dreg);
+
+ if (length)
+ *length = rlength;
+
+ if (rtype != rid)
+ printk(KERN_WARNING "hermes @ %p: %s(): "
+ "rid (0x%04x) does not match type (0x%04x)\n",
+ hw->iobase, __func__, rid, rtype);
+ if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize)
+ printk(KERN_WARNING "hermes @ %p: "
+ "Truncating LTV record from %d to %d bytes. "
+ "(rid=0x%04x, len=0x%04x)\n", hw->iobase,
+ HERMES_RECLEN_TO_BYTES(rlength), bufsize, rid, rlength);
+
+ nwords = min((unsigned)rlength - 1, bufsize / 2);
+ hermes_read_words(hw, dreg, buf, nwords);
+
+ return 0;
+}
+EXPORT_SYMBOL(hermes_read_ltv);
+
+int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
+ u16 length, const void *value)
+{
+ int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
+ int err = 0;
+ unsigned count;
+
+ if (length == 0)
+ return -EINVAL;
+
+ err = hermes_bap_seek(hw, bap, rid, 0);
+ if (err)
+ return err;
+
+ hermes_write_reg(hw, dreg, length);
+ hermes_write_reg(hw, dreg, rid);
+
+ count = length - 1;
+
+ hermes_write_bytes(hw, dreg, value, count << 1);
+
+ err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE,
+ rid, NULL);
+
+ return err;
+}
+EXPORT_SYMBOL(hermes_write_ltv);
+
+static int __init init_hermes(void)
+{
+ return 0;
+}
+
+static void __exit exit_hermes(void)
+{
+}
+
+module_init(init_hermes);
+module_exit(exit_hermes);
--- /dev/null
+/* hermes.h
+ *
+ * Driver core for the "Hermes" wireless MAC controller, as used in
+ * the Lucent Orinoco and Cabletron RoamAbout cards. It should also
+ * work on the hfa3841 and hfa3842 MAC controller chips used in the
+ * Prism I & II chipsets.
+ *
+ * This is not a complete driver, just low-level access routines for
+ * the MAC controller itself.
+ *
+ * Based on the prism2 driver from Absolute Value Systems' linux-wlan
+ * project, the Linux wvlan_cs driver, Lucent's HCF-Light
+ * (wvlan_hcf.c) library, and the NetBSD wireless driver.
+ *
+ * Copyright (C) 2000, David Gibson, Linuxcare Australia.
+ * (C) Copyright David Gibson, IBM Corp. 2001-2003.
+ *
+ * Portions taken from hfa384x.h, Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
+ *
+ * This file distributed under the GPL, version 2.
+ */
+
+#ifndef _HERMES_H
+#define _HERMES_H
+
+/* Notes on locking:
+ *
+ * As a module of low level hardware access routines, there is no
+ * locking. Users of this module should ensure that they serialize
+ * access to the hermes_t structure, and to the hardware
+*/
+
+#include <linux/if_ether.h>
+#include <asm/io.h>
+
+/*
+ * Limits and constants
+ */
+#define HERMES_ALLOC_LEN_MIN (4)
+#define HERMES_ALLOC_LEN_MAX (2400)
+#define HERMES_LTV_LEN_MAX (34)
+#define HERMES_BAP_DATALEN_MAX (4096)
+#define HERMES_BAP_OFFSET_MAX (4096)
+#define HERMES_PORTID_MAX (7)
+#define HERMES_NUMPORTS_MAX (HERMES_PORTID_MAX+1)
+#define HERMES_PDR_LEN_MAX (260) /* in bytes, from EK */
+#define HERMES_PDA_RECS_MAX (200) /* a guess */
+#define HERMES_PDA_LEN_MAX (1024) /* in bytes, from EK */
+#define HERMES_SCANRESULT_MAX (35)
+#define HERMES_CHINFORESULT_MAX (8)
+#define HERMES_MAX_MULTICAST (16)
+#define HERMES_MAGIC (0x7d1f)
+
+/*
+ * Hermes register offsets
+ */
+#define HERMES_CMD (0x00)
+#define HERMES_PARAM0 (0x02)
+#define HERMES_PARAM1 (0x04)
+#define HERMES_PARAM2 (0x06)
+#define HERMES_STATUS (0x08)
+#define HERMES_RESP0 (0x0A)
+#define HERMES_RESP1 (0x0C)
+#define HERMES_RESP2 (0x0E)
+#define HERMES_INFOFID (0x10)
+#define HERMES_RXFID (0x20)
+#define HERMES_ALLOCFID (0x22)
+#define HERMES_TXCOMPLFID (0x24)
+#define HERMES_SELECT0 (0x18)
+#define HERMES_OFFSET0 (0x1C)
+#define HERMES_DATA0 (0x36)
+#define HERMES_SELECT1 (0x1A)
+#define HERMES_OFFSET1 (0x1E)
+#define HERMES_DATA1 (0x38)
+#define HERMES_EVSTAT (0x30)
+#define HERMES_INTEN (0x32)
+#define HERMES_EVACK (0x34)
+#define HERMES_CONTROL (0x14)
+#define HERMES_SWSUPPORT0 (0x28)
+#define HERMES_SWSUPPORT1 (0x2A)
+#define HERMES_SWSUPPORT2 (0x2C)
+#define HERMES_AUXPAGE (0x3A)
+#define HERMES_AUXOFFSET (0x3C)
+#define HERMES_AUXDATA (0x3E)
+
+/*
+ * CMD register bitmasks
+ */
+#define HERMES_CMD_BUSY (0x8000)
+#define HERMES_CMD_AINFO (0x7f00)
+#define HERMES_CMD_MACPORT (0x0700)
+#define HERMES_CMD_RECL (0x0100)
+#define HERMES_CMD_WRITE (0x0100)
+#define HERMES_CMD_PROGMODE (0x0300)
+#define HERMES_CMD_CMDCODE (0x003f)
+
+/*
+ * STATUS register bitmasks
+ */
+#define HERMES_STATUS_RESULT (0x7f00)
+#define HERMES_STATUS_CMDCODE (0x003f)
+
+/*
+ * OFFSET register bitmasks
+ */
+#define HERMES_OFFSET_BUSY (0x8000)
+#define HERMES_OFFSET_ERR (0x4000)
+#define HERMES_OFFSET_DATAOFF (0x0ffe)
+
+/*
+ * Event register bitmasks (INTEN, EVSTAT, EVACK)
+ */
+#define HERMES_EV_TICK (0x8000)
+#define HERMES_EV_WTERR (0x4000)
+#define HERMES_EV_INFDROP (0x2000)
+#define HERMES_EV_INFO (0x0080)
+#define HERMES_EV_DTIM (0x0020)
+#define HERMES_EV_CMD (0x0010)
+#define HERMES_EV_ALLOC (0x0008)
+#define HERMES_EV_TXEXC (0x0004)
+#define HERMES_EV_TX (0x0002)
+#define HERMES_EV_RX (0x0001)
+
+/*
+ * Command codes
+ */
+/*--- Controller Commands ----------------------------*/
+#define HERMES_CMD_INIT (0x0000)
+#define HERMES_CMD_ENABLE (0x0001)
+#define HERMES_CMD_DISABLE (0x0002)
+#define HERMES_CMD_DIAG (0x0003)
+
+/*--- Buffer Mgmt Commands ---------------------------*/
+#define HERMES_CMD_ALLOC (0x000A)
+#define HERMES_CMD_TX (0x000B)
+
+/*--- Regulate Commands ------------------------------*/
+#define HERMES_CMD_NOTIFY (0x0010)
+#define HERMES_CMD_INQUIRE (0x0011)
+
+/*--- Configure Commands -----------------------------*/
+#define HERMES_CMD_ACCESS (0x0021)
+#define HERMES_CMD_DOWNLD (0x0022)
+
+/*--- Serial I/O Commands ----------------------------*/
+#define HERMES_CMD_READMIF (0x0030)
+#define HERMES_CMD_WRITEMIF (0x0031)
+
+/*--- Debugging Commands -----------------------------*/
+#define HERMES_CMD_TEST (0x0038)
+
+
+/* Test command arguments */
+#define HERMES_TEST_SET_CHANNEL 0x0800
+#define HERMES_TEST_MONITOR 0x0b00
+#define HERMES_TEST_STOP 0x0f00
+
+/* Authentication algorithms */
+#define HERMES_AUTH_OPEN 1
+#define HERMES_AUTH_SHARED_KEY 2
+
+/* WEP settings */
+#define HERMES_WEP_PRIVACY_INVOKED 0x0001
+#define HERMES_WEP_EXCL_UNENCRYPTED 0x0002
+#define HERMES_WEP_HOST_ENCRYPT 0x0010
+#define HERMES_WEP_HOST_DECRYPT 0x0080
+
+/* Symbol hostscan options */
+#define HERMES_HOSTSCAN_SYMBOL_5SEC 0x0001
+#define HERMES_HOSTSCAN_SYMBOL_ONCE 0x0002
+#define HERMES_HOSTSCAN_SYMBOL_PASSIVE 0x0040
+#define HERMES_HOSTSCAN_SYMBOL_BCAST 0x0080
+
+/*
+ * Frame structures and constants
+ */
+
+#define HERMES_DESCRIPTOR_OFFSET 0
+#define HERMES_802_11_OFFSET (14)
+#define HERMES_802_3_OFFSET (14+32)
+#define HERMES_802_2_OFFSET (14+32+14)
+#define HERMES_TXCNTL2_OFFSET (HERMES_802_3_OFFSET - 2)
+
+#define HERMES_RXSTAT_ERR (0x0003)
+#define HERMES_RXSTAT_BADCRC (0x0001)
+#define HERMES_RXSTAT_UNDECRYPTABLE (0x0002)
+#define HERMES_RXSTAT_MIC (0x0010) /* Frame contains MIC */
+#define HERMES_RXSTAT_MACPORT (0x0700)
+#define HERMES_RXSTAT_PCF (0x1000) /* Frame was received in CF period */
+#define HERMES_RXSTAT_MIC_KEY_ID (0x1800) /* MIC key used */
+#define HERMES_RXSTAT_MSGTYPE (0xE000)
+#define HERMES_RXSTAT_1042 (0x2000) /* RFC-1042 frame */
+#define HERMES_RXSTAT_TUNNEL (0x4000) /* bridge-tunnel encoded frame */
+#define HERMES_RXSTAT_WMP (0x6000) /* Wavelan-II Management Protocol frame */
+
+/* Shift amount for key ID in RXSTAT and TXCTRL */
+#define HERMES_MIC_KEY_ID_SHIFT 11
+
+struct hermes_tx_descriptor {
+ __le16 status;
+ __le16 reserved1;
+ __le16 reserved2;
+ __le32 sw_support;
+ u8 retry_count;
+ u8 tx_rate;
+ __le16 tx_control;
+} __attribute__ ((packed));
+
+#define HERMES_TXSTAT_RETRYERR (0x0001)
+#define HERMES_TXSTAT_AGEDERR (0x0002)
+#define HERMES_TXSTAT_DISCON (0x0004)
+#define HERMES_TXSTAT_FORMERR (0x0008)
+
+#define HERMES_TXCTRL_TX_OK (0x0002) /* ?? interrupt on Tx complete */
+#define HERMES_TXCTRL_TX_EX (0x0004) /* ?? interrupt on Tx exception */
+#define HERMES_TXCTRL_802_11 (0x0008) /* We supply 802.11 header */
+#define HERMES_TXCTRL_MIC (0x0010) /* 802.3 + TKIP */
+#define HERMES_TXCTRL_MIC_KEY_ID (0x1800) /* MIC Key ID mask */
+#define HERMES_TXCTRL_ALT_RTRY (0x0020)
+
+/* Inquiry constants and data types */
+
+#define HERMES_INQ_TALLIES (0xF100)
+#define HERMES_INQ_SCAN (0xF101)
+#define HERMES_INQ_CHANNELINFO (0xF102)
+#define HERMES_INQ_HOSTSCAN (0xF103)
+#define HERMES_INQ_HOSTSCAN_SYMBOL (0xF104)
+#define HERMES_INQ_LINKSTATUS (0xF200)
+#define HERMES_INQ_SEC_STAT_AGERE (0xF202)
+
+struct hermes_tallies_frame {
+ __le16 TxUnicastFrames;
+ __le16 TxMulticastFrames;
+ __le16 TxFragments;
+ __le16 TxUnicastOctets;
+ __le16 TxMulticastOctets;
+ __le16 TxDeferredTransmissions;
+ __le16 TxSingleRetryFrames;
+ __le16 TxMultipleRetryFrames;
+ __le16 TxRetryLimitExceeded;
+ __le16 TxDiscards;
+ __le16 RxUnicastFrames;
+ __le16 RxMulticastFrames;
+ __le16 RxFragments;
+ __le16 RxUnicastOctets;
+ __le16 RxMulticastOctets;
+ __le16 RxFCSErrors;
+ __le16 RxDiscards_NoBuffer;
+ __le16 TxDiscardsWrongSA;
+ __le16 RxWEPUndecryptable;
+ __le16 RxMsgInMsgFragments;
+ __le16 RxMsgInBadMsgFragments;
+ /* Those last are probably not available in very old firmwares */
+ __le16 RxDiscards_WEPICVError;
+ __le16 RxDiscards_WEPExcluded;
+} __attribute__ ((packed));
+
+/* Grabbed from wlan-ng - Thanks Mark... - Jean II
+ * This is the result of a scan inquiry command */
+/* Structure describing info about an Access Point */
+struct prism2_scan_apinfo {
+ __le16 channel; /* Channel where the AP sits */
+ __le16 noise; /* Noise level */
+ __le16 level; /* Signal level */
+ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
+ __le16 beacon_interv; /* Beacon interval */
+ __le16 capabilities; /* Capabilities */
+ __le16 essid_len; /* ESSID length */
+ u8 essid[32]; /* ESSID of the network */
+ u8 rates[10]; /* Bit rate supported */
+ __le16 proberesp_rate; /* Data rate of the response frame */
+ __le16 atim; /* ATIM window time, Kus (hostscan only) */
+} __attribute__ ((packed));
+
+/* Same stuff for the Lucent/Agere card.
+ * Thanks to h1kari <h1kari AT dachb0den.com> - Jean II */
+struct agere_scan_apinfo {
+ __le16 channel; /* Channel where the AP sits */
+ __le16 noise; /* Noise level */
+ __le16 level; /* Signal level */
+ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
+ __le16 beacon_interv; /* Beacon interval */
+ __le16 capabilities; /* Capabilities */
+ /* bits: 0-ess, 1-ibss, 4-privacy [wep] */
+ __le16 essid_len; /* ESSID length */
+ u8 essid[32]; /* ESSID of the network */
+} __attribute__ ((packed));
+
+/* Moustafa: Scan structure for Symbol cards */
+struct symbol_scan_apinfo {
+ u8 channel; /* Channel where the AP sits */
+ u8 unknown1; /* 8 in 2.9x and 3.9x f/w, 0 otherwise */
+ __le16 noise; /* Noise level */
+ __le16 level; /* Signal level */
+ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
+ __le16 beacon_interv; /* Beacon interval */
+ __le16 capabilities; /* Capabilities */
+ /* bits: 0-ess, 1-ibss, 4-privacy [wep] */
+ __le16 essid_len; /* ESSID length */
+ u8 essid[32]; /* ESSID of the network */
+ __le16 rates[5]; /* Bit rate supported */
+ __le16 basic_rates; /* Basic rates bitmask */
+ u8 unknown2[6]; /* Always FF:FF:FF:FF:00:00 */
+ u8 unknown3[8]; /* Always 0, appeared in f/w 3.91-68 */
+} __attribute__ ((packed));
+
+union hermes_scan_info {
+ struct agere_scan_apinfo a;
+ struct prism2_scan_apinfo p;
+ struct symbol_scan_apinfo s;
+};
+
+/* Extended scan struct for HERMES_INQ_CHANNELINFO.
+ * wl_lkm calls this an ACS scan (Automatic Channel Select).
+ * Keep out of union hermes_scan_info because it is much bigger than
+ * the older scan structures. */
+struct agere_ext_scan_info {
+ __le16 reserved0;
+
+ u8 noise;
+ u8 level;
+ u8 rx_flow;
+ u8 rate;
+ __le16 reserved1[2];
+
+ __le16 frame_control;
+ __le16 dur_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 bssid[ETH_ALEN];
+ __le16 sequence;
+ u8 addr4[ETH_ALEN];
+
+ __le16 data_length;
+
+ /* Next 3 fields do not get filled in. */
+ u8 daddr[ETH_ALEN];
+ u8 saddr[ETH_ALEN];
+ __le16 len_type;
+
+ __le64 timestamp;
+ __le16 beacon_interval;
+ __le16 capabilities;
+ u8 data[316];
+} __attribute__ ((packed));
+
+#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000)
+#define HERMES_LINKSTATUS_CONNECTED (0x0001)
+#define HERMES_LINKSTATUS_DISCONNECTED (0x0002)
+#define HERMES_LINKSTATUS_AP_CHANGE (0x0003)
+#define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004)
+#define HERMES_LINKSTATUS_AP_IN_RANGE (0x0005)
+#define HERMES_LINKSTATUS_ASSOC_FAILED (0x0006)
+
+struct hermes_linkstatus {
+ __le16 linkstatus; /* Link status */
+} __attribute__ ((packed));
+
+struct hermes_response {
+ u16 status, resp0, resp1, resp2;
+};
+
+/* "ID" structure - used for ESSID and station nickname */
+struct hermes_idstring {
+ __le16 len;
+ __le16 val[16];
+} __attribute__ ((packed));
+
+struct hermes_multicast {
+ u8 addr[HERMES_MAX_MULTICAST][ETH_ALEN];
+} __attribute__ ((packed));
+
+/* Timeouts */
+#define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */
+
+/* Basic control structure */
+typedef struct hermes {
+ void __iomem *iobase;
+ int reg_spacing;
+#define HERMES_16BIT_REGSPACING 0
+#define HERMES_32BIT_REGSPACING 1
+ u16 inten; /* Which interrupts should be enabled? */
+} hermes_t;
+
+/* Register access convenience macros */
+#define hermes_read_reg(hw, off) \
+ (ioread16((hw)->iobase + ( (off) << (hw)->reg_spacing )))
+#define hermes_write_reg(hw, off, val) \
+ (iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing)))
+#define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name)
+#define hermes_write_regn(hw, name, val) hermes_write_reg((hw), HERMES_##name, (val))
+
+/* Function prototypes */
+void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing);
+int hermes_init(hermes_t *hw);
+int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
+ struct hermes_response *resp);
+int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
+ u16 parm0, u16 parm1, u16 parm2,
+ struct hermes_response *resp);
+int hermes_allocate(hermes_t *hw, u16 size, u16 *fid);
+
+int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
+ u16 id, u16 offset);
+int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
+ u16 id, u16 offset);
+int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
+ u16 *length, void *buf);
+int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
+ u16 length, const void *value);
+
+/* Inline functions */
+
+static inline int hermes_present(hermes_t *hw)
+{
+ return hermes_read_regn(hw, SWSUPPORT0) == HERMES_MAGIC;
+}
+
+static inline void hermes_set_irqmask(hermes_t *hw, u16 events)
+{
+ hw->inten = events;
+ hermes_write_regn(hw, INTEN, events);
+}
+
+static inline int hermes_enable_port(hermes_t *hw, int port)
+{
+ return hermes_docmd_wait(hw, HERMES_CMD_ENABLE | (port << 8),
+ 0, NULL);
+}
+
+static inline int hermes_disable_port(hermes_t *hw, int port)
+{
+ return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8),
+ 0, NULL);
+}
+
+/* Initiate an INQUIRE command (tallies or scan). The result will come as an
+ * information frame in __orinoco_ev_info() */
+static inline int hermes_inquire(hermes_t *hw, u16 rid)
+{
+ return hermes_docmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL);
+}
+
+#define HERMES_BYTES_TO_RECLEN(n) ( (((n)+1)/2) + 1 )
+#define HERMES_RECLEN_TO_BYTES(n) ( ((n)-1) * 2 )
+
+/* Note that for the next two, the count is in 16-bit words, not bytes */
+static inline void hermes_read_words(struct hermes *hw, int off, void *buf, unsigned count)
+{
+ off = off << hw->reg_spacing;
+ ioread16_rep(hw->iobase + off, buf, count);
+}
+
+static inline void hermes_write_bytes(struct hermes *hw, int off,
+ const char *buf, unsigned count)
+{
+ off = off << hw->reg_spacing;
+ iowrite16_rep(hw->iobase + off, buf, count >> 1);
+ if (unlikely(count & 1))
+ iowrite8(buf[count - 1], hw->iobase + off);
+}
+
+static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count)
+{
+ unsigned i;
+
+ off = off << hw->reg_spacing;
+
+ for (i = 0; i < count; i++)
+ iowrite16(0, hw->iobase + off);
+}
+
+#define HERMES_READ_RECORD(hw, bap, rid, buf) \
+ (hermes_read_ltv((hw),(bap),(rid), sizeof(*buf), NULL, (buf)))
+#define HERMES_WRITE_RECORD(hw, bap, rid, buf) \
+ (hermes_write_ltv((hw),(bap),(rid),HERMES_BYTES_TO_RECLEN(sizeof(*buf)),(buf)))
+
+static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word)
+{
+ __le16 rec;
+ int err;
+
+ err = HERMES_READ_RECORD(hw, bap, rid, &rec);
+ *word = le16_to_cpu(rec);
+ return err;
+}
+
+static inline int hermes_write_wordrec(hermes_t *hw, int bap, u16 rid, u16 word)
+{
+ __le16 rec = cpu_to_le16(word);
+ return HERMES_WRITE_RECORD(hw, bap, rid, &rec);
+}
+
+#endif /* _HERMES_H */
--- /dev/null
+/*
+ * Hermes download helper driver.
+ *
+ * This could be entirely merged into hermes.c.
+ *
+ * I'm keeping it separate to minimise the amount of merging between
+ * kernel upgrades. It also means the memory overhead for drivers that
+ * don't need firmware download low.
+ *
+ * This driver:
+ * - is capable of writing to the volatile area of the hermes device
+ * - is currently not capable of writing to non-volatile areas
+ * - provide helpers to identify and update plugin data
+ * - is not capable of interpreting a fw image directly. That is up to
+ * the main card driver.
+ * - deals with Hermes I devices. It can probably be modified to deal
+ * with Hermes II devices
+ *
+ * Copyright (C) 2007, David Kilroy
+ *
+ * Plug data code slightly modified from spectrum_cs driver
+ * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org>
+ * Portions based on information in wl_lkm_718 Agere driver
+ * COPYRIGHT (C) 2001-2004 by Agere Systems Inc. All Rights Reserved
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include "hermes.h"
+#include "hermes_dld.h"
+
+MODULE_DESCRIPTION("Download helper for Lucent Hermes chipset");
+MODULE_AUTHOR("David Kilroy <kilroyd@gmail.com>");
+MODULE_LICENSE("Dual MPL/GPL");
+
+#define PFX "hermes_dld: "
+
+/*
+ * AUX port access. To unlock the AUX port write the access keys to the
+ * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
+ * register. Then read it and make sure it's HERMES_AUX_ENABLED.
+ */
+#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */
+#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */
+#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */
+#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */
+
+#define HERMES_AUX_PW0 0xFE01
+#define HERMES_AUX_PW1 0xDC23
+#define HERMES_AUX_PW2 0xBA45
+
+/* HERMES_CMD_DOWNLD */
+#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD)
+
+/* End markers used in dblocks */
+#define PDI_END 0x00000000 /* End of PDA */
+#define BLOCK_END 0xFFFFFFFF /* Last image block */
+#define TEXT_END 0x1A /* End of text header */
+
+/*
+ * PDA == Production Data Area
+ *
+ * In principle, the max. size of the PDA is is 4096 words. Currently,
+ * however, only about 500 bytes of this area are used.
+ *
+ * Some USB implementations can't handle sizes in excess of 1016. Note
+ * that PDA is not actually used in those USB environments, but may be
+ * retrieved by common code.
+ */
+#define MAX_PDA_SIZE 1000
+
+/* Limit the amout we try to download in a single shot.
+ * Size is in bytes.
+ */
+#define MAX_DL_SIZE 1024
+#define LIMIT_PROGRAM_SIZE 0
+
+/*
+ * The following structures have little-endian fields denoted by
+ * the leading underscore. Don't access them directly - use inline
+ * functions defined below.
+ */
+
+/*
+ * The binary image to be downloaded consists of series of data blocks.
+ * Each block has the following structure.
+ */
+struct dblock {
+ __le32 addr; /* adapter address where to write the block */
+ __le16 len; /* length of the data only, in bytes */
+ char data[0]; /* data to be written */
+} __attribute__ ((packed));
+
+/*
+ * Plug Data References are located in in the image after the last data
+ * block. They refer to areas in the adapter memory where the plug data
+ * items with matching ID should be written.
+ */
+struct pdr {
+ __le32 id; /* record ID */
+ __le32 addr; /* adapter address where to write the data */
+ __le32 len; /* expected length of the data, in bytes */
+ char next[0]; /* next PDR starts here */
+} __attribute__ ((packed));
+
+/*
+ * Plug Data Items are located in the EEPROM read from the adapter by
+ * primary firmware. They refer to the device-specific data that should
+ * be plugged into the secondary firmware.
+ */
+struct pdi {
+ __le16 len; /* length of ID and data, in words */
+ __le16 id; /* record ID */
+ char data[0]; /* plug data */
+} __attribute__ ((packed));
+
+/*** FW data block access functions ***/
+
+static inline u32
+dblock_addr(const struct dblock *blk)
+{
+ return le32_to_cpu(blk->addr);
+}
+
+static inline u32
+dblock_len(const struct dblock *blk)
+{
+ return le16_to_cpu(blk->len);
+}
+
+/*** PDR Access functions ***/
+
+static inline u32
+pdr_id(const struct pdr *pdr)
+{
+ return le32_to_cpu(pdr->id);
+}
+
+static inline u32
+pdr_addr(const struct pdr *pdr)
+{
+ return le32_to_cpu(pdr->addr);
+}
+
+static inline u32
+pdr_len(const struct pdr *pdr)
+{
+ return le32_to_cpu(pdr->len);
+}
+
+/*** PDI Access functions ***/
+
+static inline u32
+pdi_id(const struct pdi *pdi)
+{
+ return le16_to_cpu(pdi->id);
+}
+
+/* Return length of the data only, in bytes */
+static inline u32
+pdi_len(const struct pdi *pdi)
+{
+ return 2 * (le16_to_cpu(pdi->len) - 1);
+}
+
+/*** Hermes AUX control ***/
+
+static inline void
+hermes_aux_setaddr(hermes_t *hw, u32 addr)
+{
+ hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
+ hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
+}
+
+static inline int
+hermes_aux_control(hermes_t *hw, int enabled)
+{
+ int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED;
+ int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE;
+ int i;
+
+ /* Already open? */
+ if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state)
+ return 0;
+
+ hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
+ hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
+ hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
+ hermes_write_reg(hw, HERMES_CONTROL, action);
+
+ for (i = 0; i < 20; i++) {
+ udelay(10);
+ if (hermes_read_reg(hw, HERMES_CONTROL) ==
+ desired_state)
+ return 0;
+ }
+
+ return -EBUSY;
+}
+
+/*** Plug Data Functions ***/
+
+/*
+ * Scan PDR for the record with the specified RECORD_ID.
+ * If it's not found, return NULL.
+ */
+static struct pdr *
+hermes_find_pdr(struct pdr *first_pdr, u32 record_id)
+{
+ struct pdr *pdr = first_pdr;
+ void *end = (void *)first_pdr + MAX_PDA_SIZE;
+
+ while (((void *)pdr < end) &&
+ (pdr_id(pdr) != PDI_END)) {
+ /*
+ * PDR area is currently not terminated by PDI_END.
+ * It's followed by CRC records, which have the type
+ * field where PDR has length. The type can be 0 or 1.
+ */
+ if (pdr_len(pdr) < 2)
+ return NULL;
+
+ /* If the record ID matches, we are done */
+ if (pdr_id(pdr) == record_id)
+ return pdr;
+
+ pdr = (struct pdr *) pdr->next;
+ }
+ return NULL;
+}
+
+/* Scan production data items for a particular entry */
+static struct pdi *
+hermes_find_pdi(struct pdi *first_pdi, u32 record_id)
+{
+ struct pdi *pdi = first_pdi;
+
+ while (pdi_id(pdi) != PDI_END) {
+
+ /* If the record ID matches, we are done */
+ if (pdi_id(pdi) == record_id)
+ return pdi;
+
+ pdi = (struct pdi *) &pdi->data[pdi_len(pdi)];
+ }
+ return NULL;
+}
+
+/* Process one Plug Data Item - find corresponding PDR and plug it */
+static int
+hermes_plug_pdi(hermes_t *hw, struct pdr *first_pdr, const struct pdi *pdi)
+{
+ struct pdr *pdr;
+
+ /* Find the PDR corresponding to this PDI */
+ pdr = hermes_find_pdr(first_pdr, pdi_id(pdi));
+
+ /* No match is found, safe to ignore */
+ if (!pdr)
+ return 0;
+
+ /* Lengths of the data in PDI and PDR must match */
+ if (pdi_len(pdi) != pdr_len(pdr))
+ return -EINVAL;
+
+ /* do the actual plugging */
+ hermes_aux_setaddr(hw, pdr_addr(pdr));
+ hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi));
+
+ return 0;
+}
+
+/* Read PDA from the adapter */
+int hermes_read_pda(hermes_t *hw,
+ __le16 *pda,
+ u32 pda_addr,
+ u16 pda_len,
+ int use_eeprom) /* can we get this into hw? */
+{
+ int ret;
+ u16 pda_size;
+ u16 data_len = pda_len;
+ __le16 *data = pda;
+
+ if (use_eeprom) {
+ /* PDA of spectrum symbol is in eeprom */
+
+ /* Issue command to read EEPROM */
+ ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
+ if (ret)
+ return ret;
+ } else {
+ /* wl_lkm does not include PDA size in the PDA area.
+ * We will pad the information into pda, so other routines
+ * don't have to be modified */
+ pda[0] = cpu_to_le16(pda_len - 2);
+ /* Includes CFG_PROD_DATA but not itself */
+ pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
+ data_len = pda_len - 4;
+ data = pda + 2;
+ }
+
+ /* Open auxiliary port */
+ ret = hermes_aux_control(hw, 1);
+ printk(KERN_DEBUG PFX "AUX enable returned %d\n", ret);
+ if (ret)
+ return ret;
+
+ /* read PDA from EEPROM */
+ hermes_aux_setaddr(hw, pda_addr);
+ hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2);
+
+ /* Close aux port */
+ ret = hermes_aux_control(hw, 0);
+ printk(KERN_DEBUG PFX "AUX disable returned %d\n", ret);
+
+ /* Check PDA length */
+ pda_size = le16_to_cpu(pda[0]);
+ printk(KERN_DEBUG PFX "Actual PDA length %d, Max allowed %d\n",
+ pda_size, pda_len);
+ if (pda_size > pda_len)
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL(hermes_read_pda);
+
+/* Parse PDA and write the records into the adapter
+ *
+ * Attempt to write every records that is in the specified pda
+ * which also has a valid production data record for the firmware.
+ */
+int hermes_apply_pda(hermes_t *hw,
+ const char *first_pdr,
+ const __le16 *pda)
+{
+ int ret;
+ const struct pdi *pdi;
+ struct pdr *pdr;
+
+ pdr = (struct pdr *) first_pdr;
+
+ /* Go through every PDI and plug them into the adapter */
+ pdi = (const struct pdi *) (pda + 2);
+ while (pdi_id(pdi) != PDI_END) {
+ ret = hermes_plug_pdi(hw, pdr, pdi);
+ if (ret)
+ return ret;
+
+ /* Increment to the next PDI */
+ pdi = (const struct pdi *) &pdi->data[pdi_len(pdi)];
+ }
+ return 0;
+}
+EXPORT_SYMBOL(hermes_apply_pda);
+
+/* Identify the total number of bytes in all blocks
+ * including the header data.
+ */
+size_t
+hermes_blocks_length(const char *first_block)
+{
+ const struct dblock *blk = (const struct dblock *) first_block;
+ int total_len = 0;
+ int len;
+
+ /* Skip all blocks to locate Plug Data References
+ * (Spectrum CS) */
+ while (dblock_addr(blk) != BLOCK_END) {
+ len = dblock_len(blk);
+ total_len += sizeof(*blk) + len;
+ blk = (struct dblock *) &blk->data[len];
+ }
+
+ return total_len;
+}
+EXPORT_SYMBOL(hermes_blocks_length);
+
+/*** Hermes programming ***/
+
+/* About to start programming data (Hermes I)
+ * offset is the entry point
+ *
+ * Spectrum_cs' Symbol fw does not require this
+ * wl_lkm Agere fw does
+ * Don't know about intersil
+ */
+int hermesi_program_init(hermes_t *hw, u32 offset)
+{
+ int err;
+
+ /* Disable interrupts?*/
+ /*hw->inten = 0x0;*/
+ /*hermes_write_regn(hw, INTEN, 0);*/
+ /*hermes_set_irqmask(hw, 0);*/
+
+ /* Acknowledge any outstanding command */
+ hermes_write_regn(hw, EVACK, 0xFFFF);
+
+ /* Using doicmd_wait rather than docmd_wait */
+ err = hermes_doicmd_wait(hw,
+ 0x0100 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+ if (err)
+ return err;
+
+ err = hermes_doicmd_wait(hw,
+ 0x0000 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+ if (err)
+ return err;
+
+ err = hermes_aux_control(hw, 1);
+ printk(KERN_DEBUG PFX "AUX enable returned %d\n", err);
+
+ if (err)
+ return err;
+
+ printk(KERN_DEBUG PFX "Enabling volatile, EP 0x%08x\n", offset);
+ err = hermes_doicmd_wait(hw,
+ HERMES_PROGRAM_ENABLE_VOLATILE,
+ offset & 0xFFFFu,
+ offset >> 16,
+ 0,
+ NULL);
+ printk(KERN_DEBUG PFX "PROGRAM_ENABLE returned %d\n",
+ err);
+
+ return err;
+}
+EXPORT_SYMBOL(hermesi_program_init);
+
+/* Done programming data (Hermes I)
+ *
+ * Spectrum_cs' Symbol fw does not require this
+ * wl_lkm Agere fw does
+ * Don't know about intersil
+ */
+int hermesi_program_end(hermes_t *hw)
+{
+ struct hermes_response resp;
+ int rc = 0;
+ int err;
+
+ rc = hermes_docmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp);
+
+ printk(KERN_DEBUG PFX "PROGRAM_DISABLE returned %d, "
+ "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
+ rc, resp.resp0, resp.resp1, resp.resp2);
+
+ if ((rc == 0) &&
+ ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD))
+ rc = -EIO;
+
+ err = hermes_aux_control(hw, 0);
+ printk(KERN_DEBUG PFX "AUX disable returned %d\n", err);
+
+ /* Acknowledge any outstanding command */
+ hermes_write_regn(hw, EVACK, 0xFFFF);
+
+ /* Reinitialise, ignoring return */
+ (void) hermes_doicmd_wait(hw, 0x0000 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+
+ return rc ? rc : err;
+}
+EXPORT_SYMBOL(hermesi_program_end);
+
+/* Program the data blocks */
+int hermes_program(hermes_t *hw, const char *first_block, const char *end)
+{
+ const struct dblock *blk;
+ u32 blkaddr;
+ u32 blklen;
+#if LIMIT_PROGRAM_SIZE
+ u32 addr;
+ u32 len;
+#endif
+
+ blk = (const struct dblock *) first_block;
+
+ if ((const char *) blk > (end - sizeof(*blk)))
+ return -EIO;
+
+ blkaddr = dblock_addr(blk);
+ blklen = dblock_len(blk);
+
+ while ((blkaddr != BLOCK_END) &&
+ (((const char *) blk + blklen) <= end)) {
+ printk(KERN_DEBUG PFX
+ "Programming block of length %d to address 0x%08x\n",
+ blklen, blkaddr);
+
+#if !LIMIT_PROGRAM_SIZE
+ /* wl_lkm driver splits this into writes of 2000 bytes */
+ hermes_aux_setaddr(hw, blkaddr);
+ hermes_write_bytes(hw, HERMES_AUXDATA, blk->data,
+ blklen);
+#else
+ len = (blklen < MAX_DL_SIZE) ? blklen : MAX_DL_SIZE;
+ addr = blkaddr;
+
+ while (addr < (blkaddr + blklen)) {
+ printk(KERN_DEBUG PFX
+ "Programming subblock of length %d "
+ "to address 0x%08x. Data @ %p\n",
+ len, addr, &blk->data[addr - blkaddr]);
+
+ hermes_aux_setaddr(hw, addr);
+ hermes_write_bytes(hw, HERMES_AUXDATA,
+ &blk->data[addr - blkaddr],
+ len);
+
+ addr += len;
+ len = ((blkaddr + blklen - addr) < MAX_DL_SIZE) ?
+ (blkaddr + blklen - addr) : MAX_DL_SIZE;
+ }
+#endif
+ blk = (const struct dblock *) &blk->data[blklen];
+
+ if ((const char *) blk > (end - sizeof(*blk)))
+ return -EIO;
+
+ blkaddr = dblock_addr(blk);
+ blklen = dblock_len(blk);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(hermes_program);
+
+static int __init init_hermes_dld(void)
+{
+ return 0;
+}
+
+static void __exit exit_hermes_dld(void)
+{
+}
+
+module_init(init_hermes_dld);
+module_exit(exit_hermes_dld);
+
+/*** Default plugging data for Hermes I ***/
+/* Values from wl_lkm_718/hcf/dhf.c */
+
+#define DEFINE_DEFAULT_PDR(pid, length, data) \
+static const struct { \
+ __le16 len; \
+ __le16 id; \
+ u8 val[length]; \
+} __attribute__ ((packed)) default_pdr_data_##pid = { \
+ __constant_cpu_to_le16((sizeof(default_pdr_data_##pid)/ \
+ sizeof(__le16)) - 1), \
+ __constant_cpu_to_le16(pid), \
+ data \
+}
+
+#define DEFAULT_PDR(pid) default_pdr_data_##pid
+
+/* HWIF Compatiblity */
+DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00");
+
+/* PPPPSign */
+DEFINE_DEFAULT_PDR(0x0108, 4, "\x00\x00\x00\x00");
+
+/* PPPPProf */
+DEFINE_DEFAULT_PDR(0x0109, 10, "\x00\x00\x00\x00\x03\x00\x00\x00\x00\x00");
+
+/* Antenna diversity */
+DEFINE_DEFAULT_PDR(0x0150, 2, "\x00\x3F");
+
+/* Modem VCO band Set-up */
+DEFINE_DEFAULT_PDR(0x0160, 28,
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00");
+
+/* Modem Rx Gain Table Values */
+DEFINE_DEFAULT_PDR(0x0161, 256,
+ "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+ "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+ "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+ "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+ "\x3F\x01\x3E\01\x3E\x01\x3D\x01"
+ "\x3D\x01\x3C\01\x3C\x01\x3B\x01"
+ "\x3B\x01\x3A\01\x3A\x01\x39\x01"
+ "\x39\x01\x38\01\x38\x01\x37\x01"
+ "\x37\x01\x36\01\x36\x01\x35\x01"
+ "\x35\x01\x34\01\x34\x01\x33\x01"
+ "\x33\x01\x32\x01\x32\x01\x31\x01"
+ "\x31\x01\x30\x01\x30\x01\x7B\x01"
+ "\x7B\x01\x7A\x01\x7A\x01\x79\x01"
+ "\x79\x01\x78\x01\x78\x01\x77\x01"
+ "\x77\x01\x76\x01\x76\x01\x75\x01"
+ "\x75\x01\x74\x01\x74\x01\x73\x01"
+ "\x73\x01\x72\x01\x72\x01\x71\x01"
+ "\x71\x01\x70\x01\x70\x01\x68\x01"
+ "\x68\x01\x67\x01\x67\x01\x66\x01"
+ "\x66\x01\x65\x01\x65\x01\x57\x01"
+ "\x57\x01\x56\x01\x56\x01\x55\x01"
+ "\x55\x01\x54\x01\x54\x01\x53\x01"
+ "\x53\x01\x52\x01\x52\x01\x51\x01"
+ "\x51\x01\x50\x01\x50\x01\x48\x01"
+ "\x48\x01\x47\x01\x47\x01\x46\x01"
+ "\x46\x01\x45\x01\x45\x01\x44\x01"
+ "\x44\x01\x43\x01\x43\x01\x42\x01"
+ "\x42\x01\x41\x01\x41\x01\x40\x01"
+ "\x40\x01\x40\x01\x40\x01\x40\x01"
+ "\x40\x01\x40\x01\x40\x01\x40\x01"
+ "\x40\x01\x40\x01\x40\x01\x40\x01"
+ "\x40\x01\x40\x01\x40\x01\x40\x01");
+
+/* Write PDA according to certain rules.
+ *
+ * For every production data record, look for a previous setting in
+ * the pda, and use that.
+ *
+ * For certain records, use defaults if they are not found in pda.
+ */
+int hermes_apply_pda_with_defaults(hermes_t *hw,
+ const char *first_pdr,
+ const __le16 *pda)
+{
+ const struct pdr *pdr = (const struct pdr *) first_pdr;
+ struct pdi *first_pdi = (struct pdi *) &pda[2];
+ struct pdi *pdi;
+ struct pdi *default_pdi = NULL;
+ struct pdi *outdoor_pdi;
+ void *end = (void *)first_pdr + MAX_PDA_SIZE;
+ int record_id;
+
+ while (((void *)pdr < end) &&
+ (pdr_id(pdr) != PDI_END)) {
+ /*
+ * For spectrum_cs firmwares,
+ * PDR area is currently not terminated by PDI_END.
+ * It's followed by CRC records, which have the type
+ * field where PDR has length. The type can be 0 or 1.
+ */
+ if (pdr_len(pdr) < 2)
+ break;
+ record_id = pdr_id(pdr);
+
+ pdi = hermes_find_pdi(first_pdi, record_id);
+ if (pdi)
+ printk(KERN_DEBUG PFX "Found record 0x%04x at %p\n",
+ record_id, pdi);
+
+ switch (record_id) {
+ case 0x110: /* Modem REFDAC values */
+ case 0x120: /* Modem VGDAC values */
+ outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1);
+ default_pdi = NULL;
+ if (outdoor_pdi) {
+ pdi = outdoor_pdi;
+ printk(KERN_DEBUG PFX
+ "Using outdoor record 0x%04x at %p\n",
+ record_id + 1, pdi);
+ }
+ break;
+ case 0x5: /* HWIF Compatiblity */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005);
+ break;
+ case 0x108: /* PPPPSign */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0108);
+ break;
+ case 0x109: /* PPPPProf */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0109);
+ break;
+ case 0x150: /* Antenna diversity */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0150);
+ break;
+ case 0x160: /* Modem VCO band Set-up */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0160);
+ break;
+ case 0x161: /* Modem Rx Gain Table Values */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0161);
+ break;
+ default:
+ default_pdi = NULL;
+ break;
+ }
+ if (!pdi && default_pdi) {
+ /* Use default */
+ pdi = default_pdi;
+ printk(KERN_DEBUG PFX
+ "Using default record 0x%04x at %p\n",
+ record_id, pdi);
+ }
+
+ if (pdi) {
+ /* Lengths of the data in PDI and PDR must match */
+ if (pdi_len(pdi) == pdr_len(pdr)) {
+ /* do the actual plugging */
+ hermes_aux_setaddr(hw, pdr_addr(pdr));
+ hermes_write_bytes(hw, HERMES_AUXDATA,
+ pdi->data, pdi_len(pdi));
+ }
+ }
+
+ pdr++;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(hermes_apply_pda_with_defaults);
--- /dev/null
+/*
+ * Copyright (C) 2007, David Kilroy
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+#ifndef _HERMES_DLD_H
+#define _HERMES_DLD_H
+
+#include "hermes.h"
+
+int hermesi_program_init(hermes_t *hw, u32 offset);
+int hermesi_program_end(hermes_t *hw);
+int hermes_program(hermes_t *hw, const char *first_block, const char *end);
+
+int hermes_read_pda(hermes_t *hw,
+ __le16 *pda,
+ u32 pda_addr,
+ u16 pda_len,
+ int use_eeprom);
+int hermes_apply_pda(hermes_t *hw,
+ const char *first_pdr,
+ const __le16 *pda);
+int hermes_apply_pda_with_defaults(hermes_t *hw,
+ const char *first_pdr,
+ const __le16 *pda);
+
+size_t hermes_blocks_length(const char *first_block);
+
+#endif /* _HERMES_DLD_H */
--- /dev/null
+#ifndef _HERMES_RID_H
+#define _HERMES_RID_H
+
+/*
+ * Configuration RIDs
+ */
+#define HERMES_RID_CNFPORTTYPE 0xFC00
+#define HERMES_RID_CNFOWNMACADDR 0xFC01
+#define HERMES_RID_CNFDESIREDSSID 0xFC02
+#define HERMES_RID_CNFOWNCHANNEL 0xFC03
+#define HERMES_RID_CNFOWNSSID 0xFC04
+#define HERMES_RID_CNFOWNATIMWINDOW 0xFC05
+#define HERMES_RID_CNFSYSTEMSCALE 0xFC06
+#define HERMES_RID_CNFMAXDATALEN 0xFC07
+#define HERMES_RID_CNFWDSADDRESS 0xFC08
+#define HERMES_RID_CNFPMENABLED 0xFC09
+#define HERMES_RID_CNFPMEPS 0xFC0A
+#define HERMES_RID_CNFMULTICASTRECEIVE 0xFC0B
+#define HERMES_RID_CNFMAXSLEEPDURATION 0xFC0C
+#define HERMES_RID_CNFPMHOLDOVERDURATION 0xFC0D
+#define HERMES_RID_CNFOWNNAME 0xFC0E
+#define HERMES_RID_CNFOWNDTIMPERIOD 0xFC10
+#define HERMES_RID_CNFWDSADDRESS1 0xFC11
+#define HERMES_RID_CNFWDSADDRESS2 0xFC12
+#define HERMES_RID_CNFWDSADDRESS3 0xFC13
+#define HERMES_RID_CNFWDSADDRESS4 0xFC14
+#define HERMES_RID_CNFWDSADDRESS5 0xFC15
+#define HERMES_RID_CNFWDSADDRESS6 0xFC16
+#define HERMES_RID_CNFMULTICASTPMBUFFERING 0xFC17
+#define HERMES_RID_CNFWEPENABLED_AGERE 0xFC20
+#define HERMES_RID_CNFAUTHENTICATION_AGERE 0xFC21
+#define HERMES_RID_CNFMANDATORYBSSID_SYMBOL 0xFC21
+#define HERMES_RID_CNFDROPUNENCRYPTED 0xFC22
+#define HERMES_RID_CNFWEPDEFAULTKEYID 0xFC23
+#define HERMES_RID_CNFDEFAULTKEY0 0xFC24
+#define HERMES_RID_CNFDEFAULTKEY1 0xFC25
+#define HERMES_RID_CNFMWOROBUST_AGERE 0xFC25
+#define HERMES_RID_CNFDEFAULTKEY2 0xFC26
+#define HERMES_RID_CNFDEFAULTKEY3 0xFC27
+#define HERMES_RID_CNFWEPFLAGS_INTERSIL 0xFC28
+#define HERMES_RID_CNFWEPKEYMAPPINGTABLE 0xFC29
+#define HERMES_RID_CNFAUTHENTICATION 0xFC2A
+#define HERMES_RID_CNFMAXASSOCSTA 0xFC2B
+#define HERMES_RID_CNFKEYLENGTH_SYMBOL 0xFC2B
+#define HERMES_RID_CNFTXCONTROL 0xFC2C
+#define HERMES_RID_CNFROAMINGMODE 0xFC2D
+#define HERMES_RID_CNFHOSTAUTHENTICATION 0xFC2E
+#define HERMES_RID_CNFRCVCRCERROR 0xFC30
+#define HERMES_RID_CNFMMLIFE 0xFC31
+#define HERMES_RID_CNFALTRETRYCOUNT 0xFC32
+#define HERMES_RID_CNFBEACONINT 0xFC33
+#define HERMES_RID_CNFAPPCFINFO 0xFC34
+#define HERMES_RID_CNFSTAPCFINFO 0xFC35
+#define HERMES_RID_CNFPRIORITYQUSAGE 0xFC37
+#define HERMES_RID_CNFTIMCTRL 0xFC40
+#define HERMES_RID_CNFTHIRTY2TALLY 0xFC42
+#define HERMES_RID_CNFENHSECURITY 0xFC43
+#define HERMES_RID_CNFGROUPADDRESSES 0xFC80
+#define HERMES_RID_CNFCREATEIBSS 0xFC81
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD 0xFC82
+#define HERMES_RID_CNFRTSTHRESHOLD 0xFC83
+#define HERMES_RID_CNFTXRATECONTROL 0xFC84
+#define HERMES_RID_CNFPROMISCUOUSMODE 0xFC85
+#define HERMES_RID_CNFBASICRATES_SYMBOL 0xFC8A
+#define HERMES_RID_CNFPREAMBLE_SYMBOL 0xFC8C
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD0 0xFC90
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD1 0xFC91
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD2 0xFC92
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD3 0xFC93
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD4 0xFC94
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD5 0xFC95
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD6 0xFC96
+#define HERMES_RID_CNFRTSTHRESHOLD0 0xFC97
+#define HERMES_RID_CNFRTSTHRESHOLD1 0xFC98
+#define HERMES_RID_CNFRTSTHRESHOLD2 0xFC99
+#define HERMES_RID_CNFRTSTHRESHOLD3 0xFC9A
+#define HERMES_RID_CNFRTSTHRESHOLD4 0xFC9B
+#define HERMES_RID_CNFRTSTHRESHOLD5 0xFC9C
+#define HERMES_RID_CNFRTSTHRESHOLD6 0xFC9D
+#define HERMES_RID_CNFHOSTSCAN_SYMBOL 0xFCAB
+#define HERMES_RID_CNFSHORTPREAMBLE 0xFCB0
+#define HERMES_RID_CNFWEPKEYS_AGERE 0xFCB0
+#define HERMES_RID_CNFEXCLUDELONGPREAMBLE 0xFCB1
+#define HERMES_RID_CNFTXKEY_AGERE 0xFCB1
+#define HERMES_RID_CNFAUTHENTICATIONRSPTO 0xFCB2
+#define HERMES_RID_CNFSCANSSID_AGERE 0xFCB2
+#define HERMES_RID_CNFBASICRATES 0xFCB3
+#define HERMES_RID_CNFSUPPORTEDRATES 0xFCB4
+#define HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE 0xFCB4
+#define HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE 0xFCB5
+#define HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE 0xFCB6
+#define HERMES_RID_CNFADDMAPPEDTKIPKEY_AGERE 0xFCB7
+#define HERMES_RID_CNFREMMAPPEDTKIPKEY_AGERE 0xFCB8
+#define HERMES_RID_CNFSETWPACAPABILITIES_AGERE 0xFCB9
+#define HERMES_RID_CNFCACHEDPMKADDRESS 0xFCBA
+#define HERMES_RID_CNFREMOVEPMKADDRESS 0xFCBB
+#define HERMES_RID_CNFSCANCHANNELS2GHZ 0xFCC2
+#define HERMES_RID_CNFDISASSOCIATE 0xFCC8
+#define HERMES_RID_CNFTICKTIME 0xFCE0
+#define HERMES_RID_CNFSCANREQUEST 0xFCE1
+#define HERMES_RID_CNFJOINREQUEST 0xFCE2
+#define HERMES_RID_CNFAUTHENTICATESTATION 0xFCE3
+#define HERMES_RID_CNFCHANNELINFOREQUEST 0xFCE4
+#define HERMES_RID_CNFHOSTSCAN 0xFCE5
+
+/*
+ * Information RIDs
+ */
+#define HERMES_RID_MAXLOADTIME 0xFD00
+#define HERMES_RID_DOWNLOADBUFFER 0xFD01
+#define HERMES_RID_PRIID 0xFD02
+#define HERMES_RID_PRISUPRANGE 0xFD03
+#define HERMES_RID_CFIACTRANGES 0xFD04
+#define HERMES_RID_NICSERNUM 0xFD0A
+#define HERMES_RID_NICID 0xFD0B
+#define HERMES_RID_MFISUPRANGE 0xFD0C
+#define HERMES_RID_CFISUPRANGE 0xFD0D
+#define HERMES_RID_CHANNELLIST 0xFD10
+#define HERMES_RID_REGULATORYDOMAINS 0xFD11
+#define HERMES_RID_TEMPTYPE 0xFD12
+#define HERMES_RID_CIS 0xFD13
+#define HERMES_RID_STAID 0xFD20
+#define HERMES_RID_STASUPRANGE 0xFD21
+#define HERMES_RID_MFIACTRANGES 0xFD22
+#define HERMES_RID_CFIACTRANGES2 0xFD23
+#define HERMES_RID_SECONDARYVERSION_SYMBOL 0xFD24
+#define HERMES_RID_PORTSTATUS 0xFD40
+#define HERMES_RID_CURRENTSSID 0xFD41
+#define HERMES_RID_CURRENTBSSID 0xFD42
+#define HERMES_RID_COMMSQUALITY 0xFD43
+#define HERMES_RID_CURRENTTXRATE 0xFD44
+#define HERMES_RID_CURRENTBEACONINTERVAL 0xFD45
+#define HERMES_RID_CURRENTSCALETHRESHOLDS 0xFD46
+#define HERMES_RID_PROTOCOLRSPTIME 0xFD47
+#define HERMES_RID_SHORTRETRYLIMIT 0xFD48
+#define HERMES_RID_LONGRETRYLIMIT 0xFD49
+#define HERMES_RID_MAXTRANSMITLIFETIME 0xFD4A
+#define HERMES_RID_MAXRECEIVELIFETIME 0xFD4B
+#define HERMES_RID_CFPOLLABLE 0xFD4C
+#define HERMES_RID_AUTHENTICATIONALGORITHMS 0xFD4D
+#define HERMES_RID_PRIVACYOPTIONIMPLEMENTED 0xFD4F
+#define HERMES_RID_DBMCOMMSQUALITY_INTERSIL 0xFD51
+#define HERMES_RID_CURRENTTXRATE1 0xFD80
+#define HERMES_RID_CURRENTTXRATE2 0xFD81
+#define HERMES_RID_CURRENTTXRATE3 0xFD82
+#define HERMES_RID_CURRENTTXRATE4 0xFD83
+#define HERMES_RID_CURRENTTXRATE5 0xFD84
+#define HERMES_RID_CURRENTTXRATE6 0xFD85
+#define HERMES_RID_OWNMACADDR 0xFD86
+#define HERMES_RID_SCANRESULTSTABLE 0xFD88
+#define HERMES_RID_CURRENT_COUNTRY_INFO 0xFD89
+#define HERMES_RID_CURRENT_WPA_IE 0xFD8A
+#define HERMES_RID_CURRENT_TKIP_IV 0xFD8B
+#define HERMES_RID_CURRENT_ASSOC_REQ_INFO 0xFD8C
+#define HERMES_RID_CURRENT_ASSOC_RESP_INFO 0xFD8D
+#define HERMES_RID_TXQUEUEEMPTY 0xFD91
+#define HERMES_RID_PHYTYPE 0xFDC0
+#define HERMES_RID_CURRENTCHANNEL 0xFDC1
+#define HERMES_RID_CURRENTPOWERSTATE 0xFDC2
+#define HERMES_RID_CCAMODE 0xFDC3
+#define HERMES_RID_SUPPORTEDDATARATES 0xFDC6
+#define HERMES_RID_BUILDSEQ 0xFFFE
+#define HERMES_RID_FWID 0xFFFF
+
+#endif
--- /dev/null
+/* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c)
+ *
+ * A driver for Hermes or Prism 2 chipset based PCMCIA wireless
+ * adaptors, with Lucent/Agere, Intersil or Symbol firmware.
+ *
+ * Current maintainers (as of 29 September 2003) are:
+ * Pavel Roskin <proski AT gnu.org>
+ * and David Gibson <hermes AT gibson.dropbear.id.au>
+ *
+ * (C) Copyright David Gibson, IBM Corporation 2001-2003.
+ * Copyright (C) 2000 David Gibson, Linuxcare Australia.
+ * With some help from :
+ * Copyright (C) 2001 Jean Tourrilhes, HP Labs
+ * Copyright (C) 2001 Benjamin Herrenschmidt
+ *
+ * Based on dummy_cs.c 1.27 2000/06/12 21:27:25
+ *
+ * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy
+ * AT fasta.fh-dortmund.de>
+ * http://www.stud.fh-dortmund.de/~andy/wvlan/
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds AT users.sourceforge.net>. Portions created by David
+ * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights
+ * Reserved.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL. */
+
+/*
+ * TODO
+ * o Handle de-encapsulation within network layer, provide 802.11
+ * headers (patch from Thomas 'Dent' Mirlacher)
+ * o Fix possible races in SPY handling.
+ * o Disconnect wireless extensions from fundamental configuration.
+ * o (maybe) Software WEP support (patch from Stano Meduna).
+ * o (maybe) Use multiple Tx buffers - driver handling queue
+ * rather than firmware.
+ */
+
+/* Locking and synchronization:
+ *
+ * The basic principle is that everything is serialized through a
+ * single spinlock, priv->lock. The lock is used in user, bh and irq
+ * context, so when taken outside hardirq context it should always be
+ * taken with interrupts disabled. The lock protects both the
+ * hardware and the struct orinoco_private.
+ *
+ * Another flag, priv->hw_unavailable indicates that the hardware is
+ * unavailable for an extended period of time (e.g. suspended, or in
+ * the middle of a hard reset). This flag is protected by the
+ * spinlock. All code which touches the hardware should check the
+ * flag after taking the lock, and if it is set, give up on whatever
+ * they are doing and drop the lock again. The orinoco_lock()
+ * function handles this (it unlocks and returns -EBUSY if
+ * hw_unavailable is non-zero).
+ */
+
+#define DRIVER_NAME "orinoco"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/firmware.h>
+#include <linux/if_arp.h>
+#include <linux/wireless.h>
+#include <linux/ieee80211.h>
+#include <net/iw_handler.h>
+
+#include <linux/scatterlist.h>
+#include <linux/crypto.h>
+
+#include "hermes_rid.h"
+#include "hermes_dld.h"
+#include "orinoco.h"
+
+/********************************************************************/
+/* Module information */
+/********************************************************************/
+
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>");
+MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards");
+MODULE_LICENSE("Dual MPL/GPL");
+
+/* Level of debugging. Used in the macros in orinoco.h */
+#ifdef ORINOCO_DEBUG
+int orinoco_debug = ORINOCO_DEBUG;
+module_param(orinoco_debug, int, 0644);
+MODULE_PARM_DESC(orinoco_debug, "Debug level");
+EXPORT_SYMBOL(orinoco_debug);
+#endif
+
+static int suppress_linkstatus; /* = 0 */
+module_param(suppress_linkstatus, bool, 0644);
+MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes");
+static int ignore_disconnect; /* = 0 */
+module_param(ignore_disconnect, int, 0644);
+MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer");
+
+static int force_monitor; /* = 0 */
+module_param(force_monitor, int, 0644);
+MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions");
+
+/********************************************************************/
+/* Compile time configuration and compatibility stuff */
+/********************************************************************/
+
+/* We do this this way to avoid ifdefs in the actual code */
+#ifdef WIRELESS_SPY
+#define SPY_NUMBER(priv) (priv->spy_data.spy_number)
+#else
+#define SPY_NUMBER(priv) 0
+#endif /* WIRELESS_SPY */
+
+/********************************************************************/
+/* Internal constants */
+/********************************************************************/
+
+/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
+static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
+#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
+
+#define ORINOCO_MIN_MTU 256
+#define ORINOCO_MAX_MTU (IEEE80211_MAX_DATA_LEN - ENCAPS_OVERHEAD)
+
+#define SYMBOL_MAX_VER_LEN (14)
+#define USER_BAP 0
+#define IRQ_BAP 1
+#define MAX_IRQLOOPS_PER_IRQ 10
+#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of
+ * how many events the
+ * device could
+ * legitimately generate */
+#define SMALL_KEY_SIZE 5
+#define LARGE_KEY_SIZE 13
+#define TX_NICBUF_SIZE_BUG 1585 /* Bug in Symbol firmware */
+
+#define DUMMY_FID 0xFFFF
+
+/*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \
+ HERMES_MAX_MULTICAST : 0)*/
+#define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST)
+
+#define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \
+ | HERMES_EV_TX | HERMES_EV_TXEXC \
+ | HERMES_EV_WTERR | HERMES_EV_INFO \
+ | HERMES_EV_INFDROP )
+
+#define MAX_RID_LEN 1024
+
+static const struct iw_handler_def orinoco_handler_def;
+static const struct ethtool_ops orinoco_ethtool_ops;
+
+/********************************************************************/
+/* Data tables */
+/********************************************************************/
+
+/* The frequency of each channel in MHz */
+static const long channel_frequency[] = {
+ 2412, 2417, 2422, 2427, 2432, 2437, 2442,
+ 2447, 2452, 2457, 2462, 2467, 2472, 2484
+};
+#define NUM_CHANNELS ARRAY_SIZE(channel_frequency)
+
+/* This tables gives the actual meanings of the bitrate IDs returned
+ * by the firmware. */
+static struct {
+ int bitrate; /* in 100s of kilobits */
+ int automatic;
+ u16 agere_txratectrl;
+ u16 intersil_txratectrl;
+} bitrate_table[] = {
+ {110, 1, 3, 15}, /* Entry 0 is the default */
+ {10, 0, 1, 1},
+ {10, 1, 1, 1},
+ {20, 0, 2, 2},
+ {20, 1, 6, 3},
+ {55, 0, 4, 4},
+ {55, 1, 7, 7},
+ {110, 0, 5, 8},
+};
+#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table)
+
+/********************************************************************/
+/* Data types */
+/********************************************************************/
+
+/* Beginning of the Tx descriptor, used in TxExc handling */
+struct hermes_txexc_data {
+ struct hermes_tx_descriptor desc;
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+} __attribute__ ((packed));
+
+/* Rx frame header except compatibility 802.3 header */
+struct hermes_rx_descriptor {
+ /* Control */
+ __le16 status;
+ __le32 time;
+ u8 silence;
+ u8 signal;
+ u8 rate;
+ u8 rxflow;
+ __le32 reserved;
+
+ /* 802.11 header */
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ __le16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+
+ /* Data length */
+ __le16 data_len;
+} __attribute__ ((packed));
+
+/********************************************************************/
+/* Function prototypes */
+/********************************************************************/
+
+static int __orinoco_program_rids(struct net_device *dev);
+static void __orinoco_set_multicast_list(struct net_device *dev);
+
+/********************************************************************/
+/* Michael MIC crypto setup */
+/********************************************************************/
+#define MICHAEL_MIC_LEN 8
+static int orinoco_mic_init(struct orinoco_private *priv)
+{
+ priv->tx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0);
+ if (IS_ERR(priv->tx_tfm_mic)) {
+ printk(KERN_DEBUG "orinoco_mic_init: could not allocate "
+ "crypto API michael_mic\n");
+ priv->tx_tfm_mic = NULL;
+ return -ENOMEM;
+ }
+
+ priv->rx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0);
+ if (IS_ERR(priv->rx_tfm_mic)) {
+ printk(KERN_DEBUG "orinoco_mic_init: could not allocate "
+ "crypto API michael_mic\n");
+ priv->rx_tfm_mic = NULL;
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void orinoco_mic_free(struct orinoco_private *priv)
+{
+ if (priv->tx_tfm_mic)
+ crypto_free_hash(priv->tx_tfm_mic);
+ if (priv->rx_tfm_mic)
+ crypto_free_hash(priv->rx_tfm_mic);
+}
+
+static int michael_mic(struct crypto_hash *tfm_michael, u8 *key,
+ u8 *da, u8 *sa, u8 priority,
+ u8 *data, size_t data_len, u8 *mic)
+{
+ struct hash_desc desc;
+ struct scatterlist sg[2];
+ u8 hdr[ETH_HLEN + 2]; /* size of header + padding */
+
+ if (tfm_michael == NULL) {
+ printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n");
+ return -1;
+ }
+
+ /* Copy header into buffer. We need the padding on the end zeroed */
+ memcpy(&hdr[0], da, ETH_ALEN);
+ memcpy(&hdr[ETH_ALEN], sa, ETH_ALEN);
+ hdr[ETH_ALEN*2] = priority;
+ hdr[ETH_ALEN*2+1] = 0;
+ hdr[ETH_ALEN*2+2] = 0;
+ hdr[ETH_ALEN*2+3] = 0;
+
+ /* Use scatter gather to MIC header and data in one go */
+ sg_init_table(sg, 2);
+ sg_set_buf(&sg[0], hdr, sizeof(hdr));
+ sg_set_buf(&sg[1], data, data_len);
+
+ if (crypto_hash_setkey(tfm_michael, key, MIC_KEYLEN))
+ return -1;
+
+ desc.tfm = tfm_michael;
+ desc.flags = 0;
+ return crypto_hash_digest(&desc, sg, data_len + sizeof(hdr),
+ mic);
+}
+
+/********************************************************************/
+/* Internal helper functions */
+/********************************************************************/
+
+static inline void set_port_type(struct orinoco_private *priv)
+{
+ switch (priv->iw_mode) {
+ case IW_MODE_INFRA:
+ priv->port_type = 1;
+ priv->createibss = 0;
+ break;
+ case IW_MODE_ADHOC:
+ if (priv->prefer_port3) {
+ priv->port_type = 3;
+ priv->createibss = 0;
+ } else {
+ priv->port_type = priv->ibss_port;
+ priv->createibss = 1;
+ }
+ break;
+ case IW_MODE_MONITOR:
+ priv->port_type = 3;
+ priv->createibss = 0;
+ break;
+ default:
+ printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n",
+ priv->ndev->name);
+ }
+}
+
+#define ORINOCO_MAX_BSS_COUNT 64
+static int orinoco_bss_data_allocate(struct orinoco_private *priv)
+{
+ if (priv->bss_xbss_data)
+ return 0;
+
+ if (priv->has_ext_scan)
+ priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT *
+ sizeof(struct xbss_element),
+ GFP_KERNEL);
+ else
+ priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT *
+ sizeof(struct bss_element),
+ GFP_KERNEL);
+
+ if (!priv->bss_xbss_data) {
+ printk(KERN_WARNING "Out of memory allocating beacons");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void orinoco_bss_data_free(struct orinoco_private *priv)
+{
+ kfree(priv->bss_xbss_data);
+ priv->bss_xbss_data = NULL;
+}
+
+#define PRIV_BSS ((struct bss_element *)priv->bss_xbss_data)
+#define PRIV_XBSS ((struct xbss_element *)priv->bss_xbss_data)
+static void orinoco_bss_data_init(struct orinoco_private *priv)
+{
+ int i;
+
+ INIT_LIST_HEAD(&priv->bss_free_list);
+ INIT_LIST_HEAD(&priv->bss_list);
+ if (priv->has_ext_scan)
+ for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++)
+ list_add_tail(&(PRIV_XBSS[i].list),
+ &priv->bss_free_list);
+ else
+ for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++)
+ list_add_tail(&(PRIV_BSS[i].list),
+ &priv->bss_free_list);
+
+}
+
+static inline u8 *orinoco_get_ie(u8 *data, size_t len,
+ enum ieee80211_eid eid)
+{
+ u8 *p = data;
+ while ((p + 2) < (data + len)) {
+ if (p[0] == eid)
+ return p;
+ p += p[1] + 2;
+ }
+ return NULL;
+}
+
+#define WPA_OUI_TYPE "\x00\x50\xF2\x01"
+#define WPA_SELECTOR_LEN 4
+static inline u8 *orinoco_get_wpa_ie(u8 *data, size_t len)
+{
+ u8 *p = data;
+ while ((p + 2 + WPA_SELECTOR_LEN) < (data + len)) {
+ if ((p[0] == WLAN_EID_GENERIC) &&
+ (memcmp(&p[2], WPA_OUI_TYPE, WPA_SELECTOR_LEN) == 0))
+ return p;
+ p += p[1] + 2;
+ }
+ return NULL;
+}
+
+
+/********************************************************************/
+/* Download functionality */
+/********************************************************************/
+
+struct fw_info {
+ char *pri_fw;
+ char *sta_fw;
+ char *ap_fw;
+ u32 pda_addr;
+ u16 pda_size;
+};
+
+const static struct fw_info orinoco_fw[] = {
+ { "", "agere_sta_fw.bin", "agere_ap_fw.bin", 0x00390000, 1000 },
+ { "", "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 },
+ { "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", "", 0x00003100, 512 }
+};
+
+/* Structure used to access fields in FW
+ * Make sure LE decoding macros are used
+ */
+struct orinoco_fw_header {
+ char hdr_vers[6]; /* ASCII string for header version */
+ __le16 headersize; /* Total length of header */
+ __le32 entry_point; /* NIC entry point */
+ __le32 blocks; /* Number of blocks to program */
+ __le32 block_offset; /* Offset of block data from eof header */
+ __le32 pdr_offset; /* Offset to PDR data from eof header */
+ __le32 pri_offset; /* Offset to primary plug data */
+ __le32 compat_offset; /* Offset to compatibility data*/
+ char signature[0]; /* FW signature length headersize-20 */
+} __attribute__ ((packed));
+
+/* Download either STA or AP firmware into the card. */
+static int
+orinoco_dl_firmware(struct orinoco_private *priv,
+ const struct fw_info *fw,
+ int ap)
+{
+ /* Plug Data Area (PDA) */
+ __le16 *pda;
+
+ hermes_t *hw = &priv->hw;
+ const struct firmware *fw_entry;
+ const struct orinoco_fw_header *hdr;
+ const unsigned char *first_block;
+ const unsigned char *end;
+ const char *firmware;
+ struct net_device *dev = priv->ndev;
+ int err = 0;
+
+ pda = kzalloc(fw->pda_size, GFP_KERNEL);
+ if (!pda)
+ return -ENOMEM;
+
+ if (ap)
+ firmware = fw->ap_fw;
+ else
+ firmware = fw->sta_fw;
+
+ printk(KERN_DEBUG "%s: Attempting to download firmware %s\n",
+ dev->name, firmware);
+
+ /* Read current plug data */
+ err = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 0);
+ printk(KERN_DEBUG "%s: Read PDA returned %d\n", dev->name, err);
+ if (err)
+ goto free;
+
+ if (priv->cached_fw)
+ fw_entry = priv->cached_fw;
+ else {
+ err = request_firmware(&fw_entry, firmware, priv->dev);
+ if (err) {
+ printk(KERN_ERR "%s: Cannot find firmware %s\n",
+ dev->name, firmware);
+ err = -ENOENT;
+ goto free;
+ }
+ priv->cached_fw = fw_entry;
+ }
+
+ hdr = (const struct orinoco_fw_header *) fw_entry->data;
+
+ /* Enable aux port to allow programming */
+ err = hermesi_program_init(hw, le32_to_cpu(hdr->entry_point));
+ printk(KERN_DEBUG "%s: Program init returned %d\n", dev->name, err);
+ if (err != 0)
+ goto abort;
+
+ /* Program data */
+ first_block = (fw_entry->data +
+ le16_to_cpu(hdr->headersize) +
+ le32_to_cpu(hdr->block_offset));
+ end = fw_entry->data + fw_entry->size;
+
+ err = hermes_program(hw, first_block, end);
+ printk(KERN_DEBUG "%s: Program returned %d\n", dev->name, err);
+ if (err != 0)
+ goto abort;
+
+ /* Update production data */
+ first_block = (fw_entry->data +
+ le16_to_cpu(hdr->headersize) +
+ le32_to_cpu(hdr->pdr_offset));
+
+ err = hermes_apply_pda_with_defaults(hw, first_block, pda);
+ printk(KERN_DEBUG "%s: Apply PDA returned %d\n", dev->name, err);
+ if (err)
+ goto abort;
+
+ /* Tell card we've finished */
+ err = hermesi_program_end(hw);
+ printk(KERN_DEBUG "%s: Program end returned %d\n", dev->name, err);
+ if (err != 0)
+ goto abort;
+
+ /* Check if we're running */
+ printk(KERN_DEBUG "%s: hermes_present returned %d\n",
+ dev->name, hermes_present(hw));
+
+abort:
+ /* In case of error, assume firmware was bogus and release it */
+ if (err) {
+ priv->cached_fw = NULL;
+ release_firmware(fw_entry);
+ }
+
+free:
+ kfree(pda);
+ return err;
+}
+
+/* End markers */
+#define TEXT_END 0x1A /* End of text header */
+
+/*
+ * Process a firmware image - stop the card, load the firmware, reset
+ * the card and make sure it responds. For the secondary firmware take
+ * care of the PDA - read it and then write it on top of the firmware.
+ */
+static int
+symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw,
+ const unsigned char *image, const unsigned char *end,
+ int secondary)
+{
+ hermes_t *hw = &priv->hw;
+ int ret = 0;
+ const unsigned char *ptr;
+ const unsigned char *first_block;
+
+ /* Plug Data Area (PDA) */
+ __le16 *pda = NULL;
+
+ /* Binary block begins after the 0x1A marker */
+ ptr = image;
+ while (*ptr++ != TEXT_END);
+ first_block = ptr;
+
+ /* Read the PDA from EEPROM */
+ if (secondary) {
+ pda = kzalloc(fw->pda_size, GFP_KERNEL);
+ if (!pda)
+ return -ENOMEM;
+
+ ret = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 1);
+ if (ret)
+ goto free;
+ }
+
+ /* Stop the firmware, so that it can be safely rewritten */
+ if (priv->stop_fw) {
+ ret = priv->stop_fw(priv, 1);
+ if (ret)
+ goto free;
+ }
+
+ /* Program the adapter with new firmware */
+ ret = hermes_program(hw, first_block, end);
+ if (ret)
+ goto free;
+
+ /* Write the PDA to the adapter */
+ if (secondary) {
+ size_t len = hermes_blocks_length(first_block);
+ ptr = first_block + len;
+ ret = hermes_apply_pda(hw, ptr, pda);
+ kfree(pda);
+ if (ret)
+ return ret;
+ }
+
+ /* Run the firmware */
+ if (priv->stop_fw) {
+ ret = priv->stop_fw(priv, 0);
+ if (ret)
+ return ret;
+ }
+
+ /* Reset hermes chip and make sure it responds */
+ ret = hermes_init(hw);
+
+ /* hermes_reset() should return 0 with the secondary firmware */
+ if (secondary && ret != 0)
+ return -ENODEV;
+
+ /* And this should work with any firmware */
+ if (!hermes_present(hw))
+ return -ENODEV;
+
+ return 0;
+
+free:
+ kfree(pda);
+ return ret;
+}
+
+
+/*
+ * Download the firmware into the card, this also does a PCMCIA soft
+ * reset on the card, to make sure it's in a sane state.
+ */
+static int
+symbol_dl_firmware(struct orinoco_private *priv,
+ const struct fw_info *fw)
+{
+ struct net_device *dev = priv->ndev;
+ int ret;
+ const struct firmware *fw_entry;
+
+ if (request_firmware(&fw_entry, fw->pri_fw,
+ priv->dev) != 0) {
+ printk(KERN_ERR "%s: Cannot find firmware: %s\n",
+ dev->name, fw->pri_fw);
+ return -ENOENT;
+ }
+
+ /* Load primary firmware */
+ ret = symbol_dl_image(priv, fw, fw_entry->data,
+ fw_entry->data + fw_entry->size, 0);
+ release_firmware(fw_entry);
+ if (ret) {
+ printk(KERN_ERR "%s: Primary firmware download failed\n",
+ dev->name);
+ return ret;
+ }
+
+ if (request_firmware(&fw_entry, fw->sta_fw,
+ priv->dev) != 0) {
+ printk(KERN_ERR "%s: Cannot find firmware: %s\n",
+ dev->name, fw->sta_fw);
+ return -ENOENT;
+ }
+
+ /* Load secondary firmware */
+ ret = symbol_dl_image(priv, fw, fw_entry->data,
+ fw_entry->data + fw_entry->size, 1);
+ release_firmware(fw_entry);
+ if (ret) {
+ printk(KERN_ERR "%s: Secondary firmware download failed\n",
+ dev->name);
+ }
+
+ return ret;
+}
+
+static int orinoco_download(struct orinoco_private *priv)
+{
+ int err = 0;
+ /* Reload firmware */
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ /* case FIRMWARE_TYPE_INTERSIL: */
+ err = orinoco_dl_firmware(priv,
+ &orinoco_fw[priv->firmware_type], 0);
+ break;
+
+ case FIRMWARE_TYPE_SYMBOL:
+ err = symbol_dl_firmware(priv,
+ &orinoco_fw[priv->firmware_type]);
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ break;
+ }
+ /* TODO: if we fail we probably need to reinitialise
+ * the driver */
+
+ return err;
+}
+
+/********************************************************************/
+/* Device methods */
+/********************************************************************/
+
+static int orinoco_open(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+ int err;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = __orinoco_up(dev);
+
+ if (! err)
+ priv->open = 1;
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_stop(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+
+ /* We mustn't use orinoco_lock() here, because we need to be
+ able to close the interface even if hw_unavailable is set
+ (e.g. as we're released after a PC Card removal) */
+ spin_lock_irq(&priv->lock);
+
+ priv->open = 0;
+
+ err = __orinoco_down(dev);
+
+ spin_unlock_irq(&priv->lock);
+
+ return err;
+}
+
+static struct net_device_stats *orinoco_get_stats(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ return &priv->stats;
+}
+
+static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ struct iw_statistics *wstats = &priv->wstats;
+ int err;
+ unsigned long flags;
+
+ if (! netif_device_present(dev)) {
+ printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n",
+ dev->name);
+ return NULL; /* FIXME: Can we do better than this? */
+ }
+
+ /* If busy, return the old stats. Returning NULL may cause
+ * the interface to disappear from /proc/net/wireless */
+ if (orinoco_lock(priv, &flags) != 0)
+ return wstats;
+
+ /* We can't really wait for the tallies inquiry command to
+ * complete, so we just use the previous results and trigger
+ * a new tallies inquiry command for next time - Jean II */
+ /* FIXME: Really we should wait for the inquiry to come back -
+ * as it is the stats we give don't make a whole lot of sense.
+ * Unfortunately, it's not clear how to do that within the
+ * wireless extensions framework: I think we're in user
+ * context, but a lock seems to be held by the time we get in
+ * here so we're not safe to sleep here. */
+ hermes_inquire(hw, HERMES_INQ_TALLIES);
+
+ if (priv->iw_mode == IW_MODE_ADHOC) {
+ memset(&wstats->qual, 0, sizeof(wstats->qual));
+ /* If a spy address is defined, we report stats of the
+ * first spy address - Jean II */
+ if (SPY_NUMBER(priv)) {
+ wstats->qual.qual = priv->spy_data.spy_stat[0].qual;
+ wstats->qual.level = priv->spy_data.spy_stat[0].level;
+ wstats->qual.noise = priv->spy_data.spy_stat[0].noise;
+ wstats->qual.updated = priv->spy_data.spy_stat[0].updated;
+ }
+ } else {
+ struct {
+ __le16 qual, signal, noise, unused;
+ } __attribute__ ((packed)) cq;
+
+ err = HERMES_READ_RECORD(hw, USER_BAP,
+ HERMES_RID_COMMSQUALITY, &cq);
+
+ if (!err) {
+ wstats->qual.qual = (int)le16_to_cpu(cq.qual);
+ wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95;
+ wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95;
+ wstats->qual.updated = 7;
+ }
+ }
+
+ orinoco_unlock(priv, &flags);
+ return wstats;
+}
+
+static void orinoco_set_multicast_list(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0) {
+ printk(KERN_DEBUG "%s: orinoco_set_multicast_list() "
+ "called when hw_unavailable\n", dev->name);
+ return;
+ }
+
+ __orinoco_set_multicast_list(dev);
+ orinoco_unlock(priv, &flags);
+}
+
+static int orinoco_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) )
+ return -EINVAL;
+
+ /* MTU + encapsulation + header length */
+ if ( (new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) >
+ (priv->nicbuf_size - ETH_HLEN) )
+ return -EINVAL;
+
+ dev->mtu = new_mtu;
+
+ return 0;
+}
+
+/********************************************************************/
+/* Tx path */
+/********************************************************************/
+
+static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u16 txfid = priv->txfid;
+ struct ethhdr *eh;
+ int tx_control;
+ unsigned long flags;
+
+ if (! netif_running(dev)) {
+ printk(KERN_ERR "%s: Tx on stopped device!\n",
+ dev->name);
+ return NETDEV_TX_BUSY;
+ }
+
+ if (netif_queue_stopped(dev)) {
+ printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
+ dev->name);
+ return NETDEV_TX_BUSY;
+ }
+
+ if (orinoco_lock(priv, &flags) != 0) {
+ printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n",
+ dev->name);
+ return NETDEV_TX_BUSY;
+ }
+
+ if (! netif_carrier_ok(dev) || (priv->iw_mode == IW_MODE_MONITOR)) {
+ /* Oops, the firmware hasn't established a connection,
+ silently drop the packet (this seems to be the
+ safest approach). */
+ goto drop;
+ }
+
+ /* Check packet length */
+ if (skb->len < ETH_HLEN)
+ goto drop;
+
+ tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX;
+
+ if (priv->encode_alg == IW_ENCODE_ALG_TKIP)
+ tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) |
+ HERMES_TXCTRL_MIC;
+
+ if (priv->has_alt_txcntl) {
+ /* WPA enabled firmwares have tx_cntl at the end of
+ * the 802.11 header. So write zeroed descriptor and
+ * 802.11 header at the same time
+ */
+ char desc[HERMES_802_3_OFFSET];
+ __le16 *txcntl = (__le16 *) &desc[HERMES_TXCNTL2_OFFSET];
+
+ memset(&desc, 0, sizeof(desc));
+
+ *txcntl = cpu_to_le16(tx_control);
+ err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
+ txfid, 0);
+ if (err) {
+ if (net_ratelimit())
+ printk(KERN_ERR "%s: Error %d writing Tx "
+ "descriptor to BAP\n", dev->name, err);
+ goto busy;
+ }
+ } else {
+ struct hermes_tx_descriptor desc;
+
+ memset(&desc, 0, sizeof(desc));
+
+ desc.tx_control = cpu_to_le16(tx_control);
+ err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
+ txfid, 0);
+ if (err) {
+ if (net_ratelimit())
+ printk(KERN_ERR "%s: Error %d writing Tx "
+ "descriptor to BAP\n", dev->name, err);
+ goto busy;
+ }
+
+ /* Clear the 802.11 header and data length fields - some
+ * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
+ * if this isn't done. */
+ hermes_clear_words(hw, HERMES_DATA0,
+ HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
+ }
+
+ eh = (struct ethhdr *)skb->data;
+
+ /* Encapsulate Ethernet-II frames */
+ if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
+ struct header_struct {
+ struct ethhdr eth; /* 802.3 header */
+ u8 encap[6]; /* 802.2 header */
+ } __attribute__ ((packed)) hdr;
+
+ /* Strip destination and source from the data */
+ skb_pull(skb, 2 * ETH_ALEN);
+
+ /* And move them to a separate header */
+ memcpy(&hdr.eth, eh, 2 * ETH_ALEN);
+ hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len);
+ memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr));
+
+ /* Insert the SNAP header */
+ if (skb_headroom(skb) < sizeof(hdr)) {
+ printk(KERN_ERR
+ "%s: Not enough headroom for 802.2 headers %d\n",
+ dev->name, skb_headroom(skb));
+ goto drop;
+ }
+ eh = (struct ethhdr *) skb_push(skb, sizeof(hdr));
+ memcpy(eh, &hdr, sizeof(hdr));
+ }
+
+ err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len,
+ txfid, HERMES_802_3_OFFSET);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
+ dev->name, err);
+ goto busy;
+ }
+
+ /* Calculate Michael MIC */
+ if (priv->encode_alg == IW_ENCODE_ALG_TKIP) {
+ u8 mic_buf[MICHAEL_MIC_LEN + 1];
+ u8 *mic;
+ size_t offset;
+ size_t len;
+
+ if (skb->len % 2) {
+ /* MIC start is on an odd boundary */
+ mic_buf[0] = skb->data[skb->len - 1];
+ mic = &mic_buf[1];
+ offset = skb->len - 1;
+ len = MICHAEL_MIC_LEN + 1;
+ } else {
+ mic = &mic_buf[0];
+ offset = skb->len;
+ len = MICHAEL_MIC_LEN;
+ }
+
+ michael_mic(priv->tx_tfm_mic,
+ priv->tkip_key[priv->tx_key].tx_mic,
+ eh->h_dest, eh->h_source, 0 /* priority */,
+ skb->data + ETH_HLEN, skb->len - ETH_HLEN, mic);
+
+ /* Write the MIC */
+ err = hermes_bap_pwrite(hw, USER_BAP, &mic_buf[0], len,
+ txfid, HERMES_802_3_OFFSET + offset);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d writing MIC to BAP\n",
+ dev->name, err);
+ goto busy;
+ }
+ }
+
+ /* Finally, we actually initiate the send */
+ netif_stop_queue(dev);
+
+ err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL,
+ txfid, NULL);
+ if (err) {
+ netif_start_queue(dev);
+ if (net_ratelimit())
+ printk(KERN_ERR "%s: Error %d transmitting packet\n",
+ dev->name, err);
+ goto busy;
+ }
+
+ dev->trans_start = jiffies;
+ stats->tx_bytes += HERMES_802_3_OFFSET + skb->len;
+ goto ok;
+
+ drop:
+ stats->tx_errors++;
+ stats->tx_dropped++;
+
+ ok:
+ orinoco_unlock(priv, &flags);
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+
+ busy:
+ if (err == -EIO)
+ schedule_work(&priv->reset_work);
+ orinoco_unlock(priv, &flags);
+ return NETDEV_TX_BUSY;
+}
+
+static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ u16 fid = hermes_read_regn(hw, ALLOCFID);
+
+ if (fid != priv->txfid) {
+ if (fid != DUMMY_FID)
+ printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n",
+ dev->name, fid);
+ return;
+ }
+
+ hermes_write_regn(hw, ALLOCFID, DUMMY_FID);
+}
+
+static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+
+ stats->tx_packets++;
+
+ netif_wake_queue(dev);
+
+ hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
+}
+
+static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ u16 fid = hermes_read_regn(hw, TXCOMPLFID);
+ u16 status;
+ struct hermes_txexc_data hdr;
+ int err = 0;
+
+ if (fid == DUMMY_FID)
+ return; /* Nothing's really happened */
+
+ /* Read part of the frame header - we need status and addr1 */
+ err = hermes_bap_pread(hw, IRQ_BAP, &hdr,
+ sizeof(struct hermes_txexc_data),
+ fid, 0);
+
+ hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
+ stats->tx_errors++;
+
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to read descriptor on Tx error "
+ "(FID=%04X error %d)\n",
+ dev->name, fid, err);
+ return;
+ }
+
+ DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name,
+ err, fid);
+
+ /* We produce a TXDROP event only for retry or lifetime
+ * exceeded, because that's the only status that really mean
+ * that this particular node went away.
+ * Other errors means that *we* screwed up. - Jean II */
+ status = le16_to_cpu(hdr.desc.status);
+ if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) {
+ union iwreq_data wrqu;
+
+ /* Copy 802.11 dest address.
+ * We use the 802.11 header because the frame may
+ * not be 802.3 or may be mangled...
+ * In Ad-Hoc mode, it will be the node address.
+ * In managed mode, it will be most likely the AP addr
+ * User space will figure out how to convert it to
+ * whatever it needs (IP address or else).
+ * - Jean II */
+ memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN);
+ wrqu.addr.sa_family = ARPHRD_ETHER;
+
+ /* Send event to user space */
+ wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL);
+ }
+
+ netif_wake_queue(dev);
+}
+
+static void orinoco_tx_timeout(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ struct hermes *hw = &priv->hw;
+
+ printk(KERN_WARNING "%s: Tx timeout! "
+ "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n",
+ dev->name, hermes_read_regn(hw, ALLOCFID),
+ hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT));
+
+ stats->tx_errors++;
+
+ schedule_work(&priv->reset_work);
+}
+
+/********************************************************************/
+/* Rx path (data frames) */
+/********************************************************************/
+
+/* Does the frame have a SNAP header indicating it should be
+ * de-encapsulated to Ethernet-II? */
+static inline int is_ethersnap(void *_hdr)
+{
+ u8 *hdr = _hdr;
+
+ /* We de-encapsulate all packets which, a) have SNAP headers
+ * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header
+ * and where b) the OUI of the SNAP header is 00:00:00 or
+ * 00:00:f8 - we need both because different APs appear to use
+ * different OUIs for some reason */
+ return (memcmp(hdr, &encaps_hdr, 5) == 0)
+ && ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) );
+}
+
+static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac,
+ int level, int noise)
+{
+ struct iw_quality wstats;
+ wstats.level = level - 0x95;
+ wstats.noise = noise - 0x95;
+ wstats.qual = (level > noise) ? (level - noise) : 0;
+ wstats.updated = 7;
+ /* Update spy records */
+ wireless_spy_update(dev, mac, &wstats);
+}
+
+static void orinoco_stat_gather(struct net_device *dev,
+ struct sk_buff *skb,
+ struct hermes_rx_descriptor *desc)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ /* Using spy support with lots of Rx packets, like in an
+ * infrastructure (AP), will really slow down everything, because
+ * the MAC address must be compared to each entry of the spy list.
+ * If the user really asks for it (set some address in the
+ * spy list), we do it, but he will pay the price.
+ * Note that to get here, you need both WIRELESS_SPY
+ * compiled in AND some addresses in the list !!!
+ */
+ /* Note : gcc will optimise the whole section away if
+ * WIRELESS_SPY is not defined... - Jean II */
+ if (SPY_NUMBER(priv)) {
+ orinoco_spy_gather(dev, skb_mac_header(skb) + ETH_ALEN,
+ desc->signal, desc->silence);
+ }
+}
+
+/*
+ * orinoco_rx_monitor - handle received monitor frames.
+ *
+ * Arguments:
+ * dev network device
+ * rxfid received FID
+ * desc rx descriptor of the frame
+ *
+ * Call context: interrupt
+ */
+static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
+ struct hermes_rx_descriptor *desc)
+{
+ u32 hdrlen = 30; /* return full header by default */
+ u32 datalen = 0;
+ u16 fc;
+ int err;
+ int len;
+ struct sk_buff *skb;
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ hermes_t *hw = &priv->hw;
+
+ len = le16_to_cpu(desc->data_len);
+
+ /* Determine the size of the header and the data */
+ fc = le16_to_cpu(desc->frame_ctl);
+ switch (fc & IEEE80211_FCTL_FTYPE) {
+ case IEEE80211_FTYPE_DATA:
+ if ((fc & IEEE80211_FCTL_TODS)
+ && (fc & IEEE80211_FCTL_FROMDS))
+ hdrlen = 30;
+ else
+ hdrlen = 24;
+ datalen = len;
+ break;
+ case IEEE80211_FTYPE_MGMT:
+ hdrlen = 24;
+ datalen = len;
+ break;
+ case IEEE80211_FTYPE_CTL:
+ switch (fc & IEEE80211_FCTL_STYPE) {
+ case IEEE80211_STYPE_PSPOLL:
+ case IEEE80211_STYPE_RTS:
+ case IEEE80211_STYPE_CFEND:
+ case IEEE80211_STYPE_CFENDACK:
+ hdrlen = 16;
+ break;
+ case IEEE80211_STYPE_CTS:
+ case IEEE80211_STYPE_ACK:
+ hdrlen = 10;
+ break;
+ }
+ break;
+ default:
+ /* Unknown frame type */
+ break;
+ }
+
+ /* sanity check the length */
+ if (datalen > IEEE80211_MAX_DATA_LEN + 12) {
+ printk(KERN_DEBUG "%s: oversized monitor frame, "
+ "data length = %d\n", dev->name, datalen);
+ stats->rx_length_errors++;
+ goto update_stats;
+ }
+
+ skb = dev_alloc_skb(hdrlen + datalen);
+ if (!skb) {
+ printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n",
+ dev->name);
+ goto update_stats;
+ }
+
+ /* Copy the 802.11 header to the skb */
+ memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen);
+ skb_reset_mac_header(skb);
+
+ /* If any, copy the data from the card to the skb */
+ if (datalen > 0) {
+ err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen),
+ ALIGN(datalen, 2), rxfid,
+ HERMES_802_2_OFFSET);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading monitor frame\n",
+ dev->name, err);
+ goto drop;
+ }
+ }
+
+ skb->dev = dev;
+ skb->ip_summed = CHECKSUM_NONE;
+ skb->pkt_type = PACKET_OTHERHOST;
+ skb->protocol = __constant_htons(ETH_P_802_2);
+
+ stats->rx_packets++;
+ stats->rx_bytes += skb->len;
+
+ netif_rx(skb);
+ return;
+
+ drop:
+ dev_kfree_skb_irq(skb);
+ update_stats:
+ stats->rx_errors++;
+ stats->rx_dropped++;
+}
+
+/* Get tsc from the firmware */
+static int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key,
+ u8 *tsc)
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE];
+
+ if ((key < 0) || (key > 4))
+ return -EINVAL;
+
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV,
+ sizeof(tsc_arr), NULL, &tsc_arr);
+ if (!err)
+ memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0]));
+
+ return err;
+}
+
+static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ struct iw_statistics *wstats = &priv->wstats;
+ struct sk_buff *skb = NULL;
+ u16 rxfid, status;
+ int length;
+ struct hermes_rx_descriptor *desc;
+ struct orinoco_rx_data *rx_data;
+ int err;
+
+ desc = kmalloc(sizeof(*desc), GFP_ATOMIC);
+ if (!desc) {
+ printk(KERN_WARNING
+ "%s: Can't allocate space for RX descriptor\n",
+ dev->name);
+ goto update_stats;
+ }
+
+ rxfid = hermes_read_regn(hw, RXFID);
+
+ err = hermes_bap_pread(hw, IRQ_BAP, desc, sizeof(*desc),
+ rxfid, 0);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading Rx descriptor. "
+ "Frame dropped.\n", dev->name, err);
+ goto update_stats;
+ }
+
+ status = le16_to_cpu(desc->status);
+
+ if (status & HERMES_RXSTAT_BADCRC) {
+ DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n",
+ dev->name);
+ stats->rx_crc_errors++;
+ goto update_stats;
+ }
+
+ /* Handle frames in monitor mode */
+ if (priv->iw_mode == IW_MODE_MONITOR) {
+ orinoco_rx_monitor(dev, rxfid, desc);
+ goto out;
+ }
+
+ if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
+ DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
+ dev->name);
+ wstats->discard.code++;
+ goto update_stats;
+ }
+
+ length = le16_to_cpu(desc->data_len);
+
+ /* Sanity checks */
+ if (length < 3) { /* No for even an 802.2 LLC header */
+ /* At least on Symbol firmware with PCF we get quite a
+ lot of these legitimately - Poll frames with no
+ data. */
+ goto out;
+ }
+ if (length > IEEE80211_MAX_DATA_LEN) {
+ printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
+ dev->name, length);
+ stats->rx_length_errors++;
+ goto update_stats;
+ }
+
+ /* Payload size does not include Michael MIC. Increase payload
+ * size to read it together with the data. */
+ if (status & HERMES_RXSTAT_MIC)
+ length += MICHAEL_MIC_LEN;
+
+ /* We need space for the packet data itself, plus an ethernet
+ header, plus 2 bytes so we can align the IP header on a
+ 32bit boundary, plus 1 byte so we can read in odd length
+ packets from the card, which has an IO granularity of 16
+ bits */
+ skb = dev_alloc_skb(length+ETH_HLEN+2+1);
+ if (!skb) {
+ printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
+ dev->name);
+ goto update_stats;
+ }
+
+ /* We'll prepend the header, so reserve space for it. The worst
+ case is no decapsulation, when 802.3 header is prepended and
+ nothing is removed. 2 is for aligning the IP header. */
+ skb_reserve(skb, ETH_HLEN + 2);
+
+ err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length),
+ ALIGN(length, 2), rxfid,
+ HERMES_802_2_OFFSET);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading frame. "
+ "Frame dropped.\n", dev->name, err);
+ goto drop;
+ }
+
+ /* Add desc and skb to rx queue */
+ rx_data = kzalloc(sizeof(*rx_data), GFP_ATOMIC);
+ if (!rx_data) {
+ printk(KERN_WARNING "%s: Can't allocate RX packet\n",
+ dev->name);
+ goto drop;
+ }
+ rx_data->desc = desc;
+ rx_data->skb = skb;
+ list_add_tail(&rx_data->list, &priv->rx_list);
+ tasklet_schedule(&priv->rx_tasklet);
+
+ return;
+
+drop:
+ dev_kfree_skb_irq(skb);
+update_stats:
+ stats->rx_errors++;
+ stats->rx_dropped++;
+out:
+ kfree(desc);
+}
+
+static void orinoco_rx(struct net_device *dev,
+ struct hermes_rx_descriptor *desc,
+ struct sk_buff *skb)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ u16 status, fc;
+ int length;
+ struct ethhdr *hdr;
+
+ status = le16_to_cpu(desc->status);
+ length = le16_to_cpu(desc->data_len);
+ fc = le16_to_cpu(desc->frame_ctl);
+
+ /* Calculate and check MIC */
+ if (status & HERMES_RXSTAT_MIC) {
+ int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >>
+ HERMES_MIC_KEY_ID_SHIFT);
+ u8 mic[MICHAEL_MIC_LEN];
+ u8 *rxmic;
+ u8 *src = (fc & IEEE80211_FCTL_FROMDS) ?
+ desc->addr3 : desc->addr2;
+
+ /* Extract Michael MIC from payload */
+ rxmic = skb->data + skb->len - MICHAEL_MIC_LEN;
+
+ skb_trim(skb, skb->len - MICHAEL_MIC_LEN);
+ length -= MICHAEL_MIC_LEN;
+
+ michael_mic(priv->rx_tfm_mic,
+ priv->tkip_key[key_id].rx_mic,
+ desc->addr1,
+ src,
+ 0, /* priority or QoS? */
+ skb->data,
+ skb->len,
+ &mic[0]);
+
+ if (memcmp(mic, rxmic,
+ MICHAEL_MIC_LEN)) {
+ union iwreq_data wrqu;
+ struct iw_michaelmicfailure wxmic;
+
+ printk(KERN_WARNING "%s: "
+ "Invalid Michael MIC in data frame from %pM, "
+ "using key %i\n",
+ dev->name, src, key_id);
+
+ /* TODO: update stats */
+
+ /* Notify userspace */
+ memset(&wxmic, 0, sizeof(wxmic));
+ wxmic.flags = key_id & IW_MICFAILURE_KEY_ID;
+ wxmic.flags |= (desc->addr1[0] & 1) ?
+ IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE;
+ wxmic.src_addr.sa_family = ARPHRD_ETHER;
+ memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN);
+
+ (void) orinoco_hw_get_tkip_iv(priv, key_id,
+ &wxmic.tsc[0]);
+
+ memset(&wrqu, 0, sizeof(wrqu));
+ wrqu.data.length = sizeof(wxmic);
+ wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu,
+ (char *) &wxmic);
+
+ goto drop;
+ }
+ }
+
+ /* Handle decapsulation
+ * In most cases, the firmware tell us about SNAP frames.
+ * For some reason, the SNAP frames sent by LinkSys APs
+ * are not properly recognised by most firmwares.
+ * So, check ourselves */
+ if (length >= ENCAPS_OVERHEAD &&
+ (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
+ ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
+ is_ethersnap(skb->data))) {
+ /* These indicate a SNAP within 802.2 LLC within
+ 802.11 frame which we'll need to de-encapsulate to
+ the original EthernetII frame. */
+ hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD);
+ } else {
+ /* 802.3 frame - prepend 802.3 header as is */
+ hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN);
+ hdr->h_proto = htons(length);
+ }
+ memcpy(hdr->h_dest, desc->addr1, ETH_ALEN);
+ if (fc & IEEE80211_FCTL_FROMDS)
+ memcpy(hdr->h_source, desc->addr3, ETH_ALEN);
+ else
+ memcpy(hdr->h_source, desc->addr2, ETH_ALEN);
+
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->ip_summed = CHECKSUM_NONE;
+ if (fc & IEEE80211_FCTL_TODS)
+ skb->pkt_type = PACKET_OTHERHOST;
+
+ /* Process the wireless stats if needed */
+ orinoco_stat_gather(dev, skb, desc);
+
+ /* Pass the packet to the networking stack */
+ netif_rx(skb);
+ stats->rx_packets++;
+ stats->rx_bytes += length;
+
+ return;
+
+ drop:
+ dev_kfree_skb(skb);
+ stats->rx_errors++;
+ stats->rx_dropped++;
+}
+
+static void orinoco_rx_isr_tasklet(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_rx_data *rx_data, *temp;
+ struct hermes_rx_descriptor *desc;
+ struct sk_buff *skb;
+
+ /* extract desc and skb from queue */
+ list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
+ desc = rx_data->desc;
+ skb = rx_data->skb;
+ list_del(&rx_data->list);
+ kfree(rx_data);
+
+ orinoco_rx(dev, desc, skb);
+
+ kfree(desc);
+ }
+}
+
+/********************************************************************/
+/* Rx path (info frames) */
+/********************************************************************/
+
+static void print_linkstatus(struct net_device *dev, u16 status)
+{
+ char * s;
+
+ if (suppress_linkstatus)
+ return;
+
+ switch (status) {
+ case HERMES_LINKSTATUS_NOT_CONNECTED:
+ s = "Not Connected";
+ break;
+ case HERMES_LINKSTATUS_CONNECTED:
+ s = "Connected";
+ break;
+ case HERMES_LINKSTATUS_DISCONNECTED:
+ s = "Disconnected";
+ break;
+ case HERMES_LINKSTATUS_AP_CHANGE:
+ s = "AP Changed";
+ break;
+ case HERMES_LINKSTATUS_AP_OUT_OF_RANGE:
+ s = "AP Out of Range";
+ break;
+ case HERMES_LINKSTATUS_AP_IN_RANGE:
+ s = "AP In Range";
+ break;
+ case HERMES_LINKSTATUS_ASSOC_FAILED:
+ s = "Association Failed";
+ break;
+ default:
+ s = "UNKNOWN";
+ }
+
+ printk(KERN_INFO "%s: New link status: %s (%04x)\n",
+ dev->name, s, status);
+}
+
+/* Search scan results for requested BSSID, join it if found */
+static void orinoco_join_ap(struct work_struct *work)
+{
+ struct orinoco_private *priv =
+ container_of(work, struct orinoco_private, join_work);
+ struct net_device *dev = priv->ndev;
+ struct hermes *hw = &priv->hw;
+ int err;
+ unsigned long flags;
+ struct join_req {
+ u8 bssid[ETH_ALEN];
+ __le16 channel;
+ } __attribute__ ((packed)) req;
+ const int atom_len = offsetof(struct prism2_scan_apinfo, atim);
+ struct prism2_scan_apinfo *atom = NULL;
+ int offset = 4;
+ int found = 0;
+ u8 *buf;
+ u16 len;
+
+ /* Allocate buffer for scan results */
+ buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL);
+ if (! buf)
+ return;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ goto fail_lock;
+
+ /* Sanity checks in case user changed something in the meantime */
+ if (! priv->bssid_fixed)
+ goto out;
+
+ if (strlen(priv->desired_essid) == 0)
+ goto out;
+
+ /* Read scan results from the firmware */
+ err = hermes_read_ltv(hw, USER_BAP,
+ HERMES_RID_SCANRESULTSTABLE,
+ MAX_SCAN_LEN, &len, buf);
+ if (err) {
+ printk(KERN_ERR "%s: Cannot read scan results\n",
+ dev->name);
+ goto out;
+ }
+
+ len = HERMES_RECLEN_TO_BYTES(len);
+
+ /* Go through the scan results looking for the channel of the AP
+ * we were requested to join */
+ for (; offset + atom_len <= len; offset += atom_len) {
+ atom = (struct prism2_scan_apinfo *) (buf + offset);
+ if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (! found) {
+ DEBUG(1, "%s: Requested AP not found in scan results\n",
+ dev->name);
+ goto out;
+ }
+
+ memcpy(req.bssid, priv->desired_bssid, ETH_ALEN);
+ req.channel = atom->channel; /* both are little-endian */
+ err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST,
+ &req);
+ if (err)
+ printk(KERN_ERR "%s: Error issuing join request\n", dev->name);
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ fail_lock:
+ kfree(buf);
+}
+
+/* Send new BSSID to userspace */
+static void orinoco_send_bssid_wevent(struct orinoco_private *priv)
+{
+ struct net_device *dev = priv->ndev;
+ struct hermes *hw = &priv->hw;
+ union iwreq_data wrqu;
+ int err;
+
+ err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID,
+ ETH_ALEN, NULL, wrqu.ap_addr.sa_data);
+ if (err != 0)
+ return;
+
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+
+ /* Send event to user space */
+ wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+}
+
+static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv)
+{
+ struct net_device *dev = priv->ndev;
+ struct hermes *hw = &priv->hw;
+ union iwreq_data wrqu;
+ int err;
+ u8 buf[88];
+ u8 *ie;
+
+ if (!priv->has_wpa)
+ return;
+
+ err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO,
+ sizeof(buf), NULL, &buf);
+ if (err != 0)
+ return;
+
+ ie = orinoco_get_wpa_ie(buf, sizeof(buf));
+ if (ie) {
+ int rem = sizeof(buf) - (ie - &buf[0]);
+ wrqu.data.length = ie[1] + 2;
+ if (wrqu.data.length > rem)
+ wrqu.data.length = rem;
+
+ if (wrqu.data.length)
+ /* Send event to user space */
+ wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, ie);
+ }
+}
+
+static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv)
+{
+ struct net_device *dev = priv->ndev;
+ struct hermes *hw = &priv->hw;
+ union iwreq_data wrqu;
+ int err;
+ u8 buf[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */
+ u8 *ie;
+
+ if (!priv->has_wpa)
+ return;
+
+ err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENT_ASSOC_RESP_INFO,
+ sizeof(buf), NULL, &buf);
+ if (err != 0)
+ return;
+
+ ie = orinoco_get_wpa_ie(buf, sizeof(buf));
+ if (ie) {
+ int rem = sizeof(buf) - (ie - &buf[0]);
+ wrqu.data.length = ie[1] + 2;
+ if (wrqu.data.length > rem)
+ wrqu.data.length = rem;
+
+ if (wrqu.data.length)
+ /* Send event to user space */
+ wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, ie);
+ }
+}
+
+static void orinoco_send_wevents(struct work_struct *work)
+{
+ struct orinoco_private *priv =
+ container_of(work, struct orinoco_private, wevent_work);
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return;
+
+ orinoco_send_assocreqie_wevent(priv);
+ orinoco_send_assocrespie_wevent(priv);
+ orinoco_send_bssid_wevent(priv);
+
+ orinoco_unlock(priv, &flags);
+}
+
+static inline void orinoco_clear_scan_results(struct orinoco_private *priv,
+ unsigned long scan_age)
+{
+ if (priv->has_ext_scan) {
+ struct xbss_element *bss;
+ struct xbss_element *tmp_bss;
+
+ /* Blow away current list of scan results */
+ list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) {
+ if (!scan_age ||
+ time_after(jiffies, bss->last_scanned + scan_age)) {
+ list_move_tail(&bss->list,
+ &priv->bss_free_list);
+ /* Don't blow away ->list, just BSS data */
+ memset(&bss->bss, 0, sizeof(bss->bss));
+ bss->last_scanned = 0;
+ }
+ }
+ } else {
+ struct bss_element *bss;
+ struct bss_element *tmp_bss;
+
+ /* Blow away current list of scan results */
+ list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) {
+ if (!scan_age ||
+ time_after(jiffies, bss->last_scanned + scan_age)) {
+ list_move_tail(&bss->list,
+ &priv->bss_free_list);
+ /* Don't blow away ->list, just BSS data */
+ memset(&bss->bss, 0, sizeof(bss->bss));
+ bss->last_scanned = 0;
+ }
+ }
+ }
+}
+
+static void orinoco_add_ext_scan_result(struct orinoco_private *priv,
+ struct agere_ext_scan_info *atom)
+{
+ struct xbss_element *bss = NULL;
+ int found = 0;
+
+ /* Try to update an existing bss first */
+ list_for_each_entry(bss, &priv->bss_list, list) {
+ if (compare_ether_addr(bss->bss.bssid, atom->bssid))
+ continue;
+ /* ESSID lengths */
+ if (bss->bss.data[1] != atom->data[1])
+ continue;
+ if (memcmp(&bss->bss.data[2], &atom->data[2],
+ atom->data[1]))
+ continue;
+ found = 1;
+ break;
+ }
+
+ /* Grab a bss off the free list */
+ if (!found && !list_empty(&priv->bss_free_list)) {
+ bss = list_entry(priv->bss_free_list.next,
+ struct xbss_element, list);
+ list_del(priv->bss_free_list.next);
+
+ list_add_tail(&bss->list, &priv->bss_list);
+ }
+
+ if (bss) {
+ /* Always update the BSS to get latest beacon info */
+ memcpy(&bss->bss, atom, sizeof(bss->bss));
+ bss->last_scanned = jiffies;
+ }
+}
+
+static int orinoco_process_scan_results(struct net_device *dev,
+ unsigned char *buf,
+ int len)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int offset; /* In the scan data */
+ union hermes_scan_info *atom;
+ int atom_len;
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ atom_len = sizeof(struct agere_scan_apinfo);
+ offset = 0;
+ break;
+ case FIRMWARE_TYPE_SYMBOL:
+ /* Lack of documentation necessitates this hack.
+ * Different firmwares have 68 or 76 byte long atoms.
+ * We try modulo first. If the length divides by both,
+ * we check what would be the channel in the second
+ * frame for a 68-byte atom. 76-byte atoms have 0 there.
+ * Valid channel cannot be 0. */
+ if (len % 76)
+ atom_len = 68;
+ else if (len % 68)
+ atom_len = 76;
+ else if (len >= 1292 && buf[68] == 0)
+ atom_len = 76;
+ else
+ atom_len = 68;
+ offset = 0;
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ offset = 4;
+ if (priv->has_hostscan) {
+ atom_len = le16_to_cpup((__le16 *)buf);
+ /* Sanity check for atom_len */
+ if (atom_len < sizeof(struct prism2_scan_apinfo)) {
+ printk(KERN_ERR "%s: Invalid atom_len in scan "
+ "data: %d\n", dev->name, atom_len);
+ return -EIO;
+ }
+ } else
+ atom_len = offsetof(struct prism2_scan_apinfo, atim);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ /* Check that we got an whole number of atoms */
+ if ((len - offset) % atom_len) {
+ printk(KERN_ERR "%s: Unexpected scan data length %d, "
+ "atom_len %d, offset %d\n", dev->name, len,
+ atom_len, offset);
+ return -EIO;
+ }
+
+ orinoco_clear_scan_results(priv, msecs_to_jiffies(15000));
+
+ /* Read the entries one by one */
+ for (; offset + atom_len <= len; offset += atom_len) {
+ int found = 0;
+ struct bss_element *bss = NULL;
+
+ /* Get next atom */
+ atom = (union hermes_scan_info *) (buf + offset);
+
+ /* Try to update an existing bss first */
+ list_for_each_entry(bss, &priv->bss_list, list) {
+ if (compare_ether_addr(bss->bss.a.bssid, atom->a.bssid))
+ continue;
+ if (le16_to_cpu(bss->bss.a.essid_len) !=
+ le16_to_cpu(atom->a.essid_len))
+ continue;
+ if (memcmp(bss->bss.a.essid, atom->a.essid,
+ le16_to_cpu(atom->a.essid_len)))
+ continue;
+ found = 1;
+ break;
+ }
+
+ /* Grab a bss off the free list */
+ if (!found && !list_empty(&priv->bss_free_list)) {
+ bss = list_entry(priv->bss_free_list.next,
+ struct bss_element, list);
+ list_del(priv->bss_free_list.next);
+
+ list_add_tail(&bss->list, &priv->bss_list);
+ }
+
+ if (bss) {
+ /* Always update the BSS to get latest beacon info */
+ memcpy(&bss->bss, atom, sizeof(bss->bss));
+ bss->last_scanned = jiffies;
+ }
+ }
+
+ return 0;
+}
+
+static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ u16 infofid;
+ struct {
+ __le16 len;
+ __le16 type;
+ } __attribute__ ((packed)) info;
+ int len, type;
+ int err;
+
+ /* This is an answer to an INQUIRE command that we did earlier,
+ * or an information "event" generated by the card
+ * The controller return to us a pseudo frame containing
+ * the information in question - Jean II */
+ infofid = hermes_read_regn(hw, INFOFID);
+
+ /* Read the info frame header - don't try too hard */
+ err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info),
+ infofid, 0);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading info frame. "
+ "Frame dropped.\n", dev->name, err);
+ return;
+ }
+
+ len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len));
+ type = le16_to_cpu(info.type);
+
+ switch (type) {
+ case HERMES_INQ_TALLIES: {
+ struct hermes_tallies_frame tallies;
+ struct iw_statistics *wstats = &priv->wstats;
+
+ if (len > sizeof(tallies)) {
+ printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n",
+ dev->name, len);
+ len = sizeof(tallies);
+ }
+
+ err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len,
+ infofid, sizeof(info));
+ if (err)
+ break;
+
+ /* Increment our various counters */
+ /* wstats->discard.nwid - no wrong BSSID stuff */
+ wstats->discard.code +=
+ le16_to_cpu(tallies.RxWEPUndecryptable);
+ if (len == sizeof(tallies))
+ wstats->discard.code +=
+ le16_to_cpu(tallies.RxDiscards_WEPICVError) +
+ le16_to_cpu(tallies.RxDiscards_WEPExcluded);
+ wstats->discard.misc +=
+ le16_to_cpu(tallies.TxDiscardsWrongSA);
+ wstats->discard.fragment +=
+ le16_to_cpu(tallies.RxMsgInBadMsgFragments);
+ wstats->discard.retries +=
+ le16_to_cpu(tallies.TxRetryLimitExceeded);
+ /* wstats->miss.beacon - no match */
+ }
+ break;
+ case HERMES_INQ_LINKSTATUS: {
+ struct hermes_linkstatus linkstatus;
+ u16 newstatus;
+ int connected;
+
+ if (priv->iw_mode == IW_MODE_MONITOR)
+ break;
+
+ if (len != sizeof(linkstatus)) {
+ printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n",
+ dev->name, len);
+ break;
+ }
+
+ err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len,
+ infofid, sizeof(info));
+ if (err)
+ break;
+ newstatus = le16_to_cpu(linkstatus.linkstatus);
+
+ /* Symbol firmware uses "out of range" to signal that
+ * the hostscan frame can be requested. */
+ if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE &&
+ priv->firmware_type == FIRMWARE_TYPE_SYMBOL &&
+ priv->has_hostscan && priv->scan_inprogress) {
+ hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL);
+ break;
+ }
+
+ connected = (newstatus == HERMES_LINKSTATUS_CONNECTED)
+ || (newstatus == HERMES_LINKSTATUS_AP_CHANGE)
+ || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE);
+
+ if (connected)
+ netif_carrier_on(dev);
+ else if (!ignore_disconnect)
+ netif_carrier_off(dev);
+
+ if (newstatus != priv->last_linkstatus) {
+ priv->last_linkstatus = newstatus;
+ print_linkstatus(dev, newstatus);
+ /* The info frame contains only one word which is the
+ * status (see hermes.h). The status is pretty boring
+ * in itself, that's why we export the new BSSID...
+ * Jean II */
+ schedule_work(&priv->wevent_work);
+ }
+ }
+ break;
+ case HERMES_INQ_SCAN:
+ if (!priv->scan_inprogress && priv->bssid_fixed &&
+ priv->firmware_type == FIRMWARE_TYPE_INTERSIL) {
+ schedule_work(&priv->join_work);
+ break;
+ }
+ /* fall through */
+ case HERMES_INQ_HOSTSCAN:
+ case HERMES_INQ_HOSTSCAN_SYMBOL: {
+ /* Result of a scanning. Contains information about
+ * cells in the vicinity - Jean II */
+ union iwreq_data wrqu;
+ unsigned char *buf;
+
+ /* Scan is no longer in progress */
+ priv->scan_inprogress = 0;
+
+ /* Sanity check */
+ if (len > 4096) {
+ printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n",
+ dev->name, len);
+ break;
+ }
+
+ /* Allocate buffer for results */
+ buf = kmalloc(len, GFP_ATOMIC);
+ if (buf == NULL)
+ /* No memory, so can't printk()... */
+ break;
+
+ /* Read scan data */
+ err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len,
+ infofid, sizeof(info));
+ if (err) {
+ kfree(buf);
+ break;
+ }
+
+#ifdef ORINOCO_DEBUG
+ {
+ int i;
+ printk(KERN_DEBUG "Scan result [%02X", buf[0]);
+ for(i = 1; i < (len * 2); i++)
+ printk(":%02X", buf[i]);
+ printk("]\n");
+ }
+#endif /* ORINOCO_DEBUG */
+
+ if (orinoco_process_scan_results(dev, buf, len) == 0) {
+ /* Send an empty event to user space.
+ * We don't send the received data on the event because
+ * it would require us to do complex transcoding, and
+ * we want to minimise the work done in the irq handler
+ * Use a request to extract the data - Jean II */
+ wrqu.data.length = 0;
+ wrqu.data.flags = 0;
+ wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL);
+ }
+ kfree(buf);
+ }
+ break;
+ case HERMES_INQ_CHANNELINFO:
+ {
+ struct agere_ext_scan_info *bss;
+
+ if (!priv->scan_inprogress) {
+ printk(KERN_DEBUG "%s: Got chaninfo without scan, "
+ "len=%d\n", dev->name, len);
+ break;
+ }
+
+ /* An empty result indicates that the scan is complete */
+ if (len == 0) {
+ union iwreq_data wrqu;
+
+ /* Scan is no longer in progress */
+ priv->scan_inprogress = 0;
+
+ wrqu.data.length = 0;
+ wrqu.data.flags = 0;
+ wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL);
+ break;
+ }
+
+ /* Sanity check */
+ else if (len > sizeof(*bss)) {
+ printk(KERN_WARNING
+ "%s: Ext scan results too large (%d bytes). "
+ "Truncating results to %zd bytes.\n",
+ dev->name, len, sizeof(*bss));
+ len = sizeof(*bss);
+ } else if (len < (offsetof(struct agere_ext_scan_info,
+ data) + 2)) {
+ /* Drop this result now so we don't have to
+ * keep checking later */
+ printk(KERN_WARNING
+ "%s: Ext scan results too short (%d bytes)\n",
+ dev->name, len);
+ break;
+ }
+
+ bss = kmalloc(sizeof(*bss), GFP_ATOMIC);
+ if (bss == NULL)
+ break;
+
+ /* Read scan data */
+ err = hermes_bap_pread(hw, IRQ_BAP, (void *) bss, len,
+ infofid, sizeof(info));
+ if (err) {
+ kfree(bss);
+ break;
+ }
+
+ orinoco_add_ext_scan_result(priv, bss);
+
+ kfree(bss);
+ break;
+ }
+ case HERMES_INQ_SEC_STAT_AGERE:
+ /* Security status (Agere specific) */
+ /* Ignore this frame for now */
+ if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
+ break;
+ /* fall through */
+ default:
+ printk(KERN_DEBUG "%s: Unknown information frame received: "
+ "type 0x%04x, length %d\n", dev->name, type, len);
+ /* We don't actually do anything about it */
+ break;
+ }
+}
+
+static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw)
+{
+ if (net_ratelimit())
+ printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name);
+}
+
+/********************************************************************/
+/* Internal hardware control routines */
+/********************************************************************/
+
+int __orinoco_up(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err;
+
+ netif_carrier_off(dev); /* just to make sure */
+
+ err = __orinoco_program_rids(dev);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d configuring card\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Fire things up again */
+ hermes_set_irqmask(hw, ORINOCO_INTEN);
+ err = hermes_enable_port(hw, 0);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d enabling MAC port\n",
+ dev->name, err);
+ return err;
+ }
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+int __orinoco_down(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err;
+
+ netif_stop_queue(dev);
+
+ if (! priv->hw_unavailable) {
+ if (! priv->broken_disableport) {
+ err = hermes_disable_port(hw, 0);
+ if (err) {
+ /* Some firmwares (e.g. Intersil 1.3.x) seem
+ * to have problems disabling the port, oh
+ * well, too bad. */
+ printk(KERN_WARNING "%s: Error %d disabling MAC port\n",
+ dev->name, err);
+ priv->broken_disableport = 1;
+ }
+ }
+ hermes_set_irqmask(hw, 0);
+ hermes_write_regn(hw, EVACK, 0xffff);
+ }
+
+ /* firmware will have to reassociate */
+ netif_carrier_off(dev);
+ priv->last_linkstatus = 0xffff;
+
+ return 0;
+}
+
+static int orinoco_allocate_fid(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err;
+
+ err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+ if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) {
+ /* Try workaround for old Symbol firmware bug */
+ printk(KERN_WARNING "%s: firmware ALLOC bug detected "
+ "(old Symbol firmware?). Trying to work around... ",
+ dev->name);
+
+ priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
+ err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+ if (err)
+ printk("failed!\n");
+ else
+ printk("ok.\n");
+ }
+
+ return err;
+}
+
+int orinoco_reinit_firmware(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err;
+
+ err = hermes_init(hw);
+ if (priv->do_fw_download && !err) {
+ err = orinoco_download(priv);
+ if (err)
+ priv->do_fw_download = 0;
+ }
+ if (!err)
+ err = orinoco_allocate_fid(dev);
+
+ return err;
+}
+
+static int __orinoco_hw_set_bitrate(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+
+ if (priv->bitratemode >= BITRATE_TABLE_SIZE) {
+ printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n",
+ priv->ndev->name, priv->bitratemode);
+ return -EINVAL;
+ }
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFTXRATECONTROL,
+ bitrate_table[priv->bitratemode].agere_txratectrl);
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ case FIRMWARE_TYPE_SYMBOL:
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFTXRATECONTROL,
+ bitrate_table[priv->bitratemode].intersil_txratectrl);
+ break;
+ default:
+ BUG();
+ }
+
+ return err;
+}
+
+/* Set fixed AP address */
+static int __orinoco_hw_set_wap(struct orinoco_private *priv)
+{
+ int roaming_flag;
+ int err = 0;
+ hermes_t *hw = &priv->hw;
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ /* not supported */
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ if (priv->bssid_fixed)
+ roaming_flag = 2;
+ else
+ roaming_flag = 1;
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFROAMINGMODE,
+ roaming_flag);
+ break;
+ case FIRMWARE_TYPE_SYMBOL:
+ err = HERMES_WRITE_RECORD(hw, USER_BAP,
+ HERMES_RID_CNFMANDATORYBSSID_SYMBOL,
+ &priv->desired_bssid);
+ break;
+ }
+ return err;
+}
+
+/* Change the WEP keys and/or the current keys. Can be called
+ * either from __orinoco_hw_setup_enc() or directly from
+ * orinoco_ioctl_setiwencode(). In the later case the association
+ * with the AP is not broken (if the firmware can handle it),
+ * which is needed for 802.1x implementations. */
+static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ err = HERMES_WRITE_RECORD(hw, USER_BAP,
+ HERMES_RID_CNFWEPKEYS_AGERE,
+ &priv->keys);
+ if (err)
+ return err;
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFTXKEY_AGERE,
+ priv->tx_key);
+ if (err)
+ return err;
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ case FIRMWARE_TYPE_SYMBOL:
+ {
+ int keylen;
+ int i;
+
+ /* Force uniform key length to work around firmware bugs */
+ keylen = le16_to_cpu(priv->keys[priv->tx_key].len);
+
+ if (keylen > LARGE_KEY_SIZE) {
+ printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n",
+ priv->ndev->name, priv->tx_key, keylen);
+ return -E2BIG;
+ }
+
+ /* Write all 4 keys */
+ for(i = 0; i < ORINOCO_MAX_KEYS; i++) {
+ err = hermes_write_ltv(hw, USER_BAP,
+ HERMES_RID_CNFDEFAULTKEY0 + i,
+ HERMES_BYTES_TO_RECLEN(keylen),
+ priv->keys[i].data);
+ if (err)
+ return err;
+ }
+
+ /* Write the index of the key used in transmission */
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFWEPDEFAULTKEYID,
+ priv->tx_key);
+ if (err)
+ return err;
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static int __orinoco_hw_setup_enc(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ int master_wep_flag;
+ int auth_flag;
+ int enc_flag;
+
+ /* Setup WEP keys for WEP and WPA */
+ if (priv->encode_alg)
+ __orinoco_hw_setup_wepkeys(priv);
+
+ if (priv->wep_restrict)
+ auth_flag = HERMES_AUTH_SHARED_KEY;
+ else
+ auth_flag = HERMES_AUTH_OPEN;
+
+ if (priv->wpa_enabled)
+ enc_flag = 2;
+ else if (priv->encode_alg == IW_ENCODE_ALG_WEP)
+ enc_flag = 1;
+ else
+ enc_flag = 0;
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE: /* Agere style WEP */
+ if (priv->encode_alg == IW_ENCODE_ALG_WEP) {
+ /* Enable the shared-key authentication. */
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFAUTHENTICATION_AGERE,
+ auth_flag);
+ }
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFWEPENABLED_AGERE,
+ enc_flag);
+ if (err)
+ return err;
+
+ if (priv->has_wpa) {
+ /* Set WPA key management */
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE,
+ priv->key_mgmt);
+ if (err)
+ return err;
+ }
+
+ break;
+
+ case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */
+ case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */
+ if (priv->encode_alg == IW_ENCODE_ALG_WEP) {
+ if (priv->wep_restrict ||
+ (priv->firmware_type == FIRMWARE_TYPE_SYMBOL))
+ master_wep_flag = HERMES_WEP_PRIVACY_INVOKED |
+ HERMES_WEP_EXCL_UNENCRYPTED;
+ else
+ master_wep_flag = HERMES_WEP_PRIVACY_INVOKED;
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFAUTHENTICATION,
+ auth_flag);
+ if (err)
+ return err;
+ } else
+ master_wep_flag = 0;
+
+ if (priv->iw_mode == IW_MODE_MONITOR)
+ master_wep_flag |= HERMES_WEP_HOST_DECRYPT;
+
+ /* Master WEP setting : on/off */
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFWEPFLAGS_INTERSIL,
+ master_wep_flag);
+ if (err)
+ return err;
+
+ break;
+ }
+
+ return 0;
+}
+
+/* key must be 32 bytes, including the tx and rx MIC keys.
+ * rsc must be 8 bytes
+ * tsc must be 8 bytes or NULL
+ */
+static int __orinoco_hw_set_tkip_key(hermes_t *hw, int key_idx, int set_tx,
+ u8 *key, u8 *rsc, u8 *tsc)
+{
+ struct {
+ __le16 idx;
+ u8 rsc[IW_ENCODE_SEQ_MAX_SIZE];
+ u8 key[TKIP_KEYLEN];
+ u8 tx_mic[MIC_KEYLEN];
+ u8 rx_mic[MIC_KEYLEN];
+ u8 tsc[IW_ENCODE_SEQ_MAX_SIZE];
+ } __attribute__ ((packed)) buf;
+ int ret;
+ int err;
+ int k;
+ u16 xmitting;
+
+ key_idx &= 0x3;
+
+ if (set_tx)
+ key_idx |= 0x8000;
+
+ buf.idx = cpu_to_le16(key_idx);
+ memcpy(buf.key, key,
+ sizeof(buf.key) + sizeof(buf.tx_mic) + sizeof(buf.rx_mic));
+
+ if (rsc == NULL)
+ memset(buf.rsc, 0, sizeof(buf.rsc));
+ else
+ memcpy(buf.rsc, rsc, sizeof(buf.rsc));
+
+ if (tsc == NULL) {
+ memset(buf.tsc, 0, sizeof(buf.tsc));
+ buf.tsc[4] = 0x10;
+ } else {
+ memcpy(buf.tsc, tsc, sizeof(buf.tsc));
+ }
+
+ /* Wait upto 100ms for tx queue to empty */
+ k = 100;
+ do {
+ k--;
+ udelay(1000);
+ ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY,
+ &xmitting);
+ if (ret)
+ break;
+ } while ((k > 0) && xmitting);
+
+ if (k == 0)
+ ret = -ETIMEDOUT;
+
+ err = HERMES_WRITE_RECORD(hw, USER_BAP,
+ HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE,
+ &buf);
+
+ return ret ? ret : err;
+}
+
+static int orinoco_clear_tkip_key(struct orinoco_private *priv,
+ int key_idx)
+{
+ hermes_t *hw = &priv->hw;
+ int err;
+
+ memset(&priv->tkip_key[key_idx], 0, sizeof(priv->tkip_key[key_idx]));
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE,
+ key_idx);
+ if (err)
+ printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n",
+ priv->ndev->name, err, key_idx);
+ return err;
+}
+
+static int __orinoco_program_rids(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err;
+ struct hermes_idstring idbuf;
+
+ /* Set the MAC address */
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
+ HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting MAC address\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set up the link mode */
+ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE,
+ priv->port_type);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting port type\n",
+ dev->name, err);
+ return err;
+ }
+ /* Set the channel/frequency */
+ if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFOWNCHANNEL,
+ priv->channel);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting channel %d\n",
+ dev->name, err, priv->channel);
+ return err;
+ }
+ }
+
+ if (priv->has_ibss) {
+ u16 createibss;
+
+ if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) {
+ printk(KERN_WARNING "%s: This firmware requires an "
+ "ESSID in IBSS-Ad-Hoc mode.\n", dev->name);
+ /* With wvlan_cs, in this case, we would crash.
+ * hopefully, this driver will behave better...
+ * Jean II */
+ createibss = 0;
+ } else {
+ createibss = priv->createibss;
+ }
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFCREATEIBSS,
+ createibss);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set the desired BSSID */
+ err = __orinoco_hw_set_wap(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting AP address\n",
+ dev->name, err);
+ return err;
+ }
+ /* Set the desired ESSID */
+ idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
+ memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
+ /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting OWNSSID\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set the station name */
+ idbuf.len = cpu_to_le16(strlen(priv->nick));
+ memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting nickname\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set AP density */
+ if (priv->has_sensitivity) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSYSTEMSCALE,
+ priv->ap_density);
+ if (err) {
+ printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. "
+ "Disabling sensitivity control\n",
+ dev->name, err);
+
+ priv->has_sensitivity = 0;
+ }
+ }
+
+ /* Set RTS threshold */
+ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
+ priv->rts_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting RTS threshold\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set fragmentation threshold or MWO robustness */
+ if (priv->has_mwo)
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMWOROBUST_AGERE,
+ priv->mwo_robust);
+ else
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
+ priv->frag_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting fragmentation\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set bitrate */
+ err = __orinoco_hw_set_bitrate(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting bitrate\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set power management */
+ if (priv->has_pm) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPMENABLED,
+ priv->pm_on);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMULTICASTRECEIVE,
+ priv->pm_mcast);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMAXSLEEPDURATION,
+ priv->pm_period);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPMHOLDOVERDURATION,
+ priv->pm_timeout);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set preamble - only for Symbol so far... */
+ if (priv->has_preamble) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPREAMBLE_SYMBOL,
+ priv->preamble);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting preamble\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set up encryption */
+ if (priv->has_wep || priv->has_wpa) {
+ err = __orinoco_hw_setup_enc(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d activating encryption\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ if (priv->iw_mode == IW_MODE_MONITOR) {
+ /* Enable monitor mode */
+ dev->type = ARPHRD_IEEE80211;
+ err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ HERMES_TEST_MONITOR, 0, NULL);
+ } else {
+ /* Disable monitor mode */
+ dev->type = ARPHRD_ETHER;
+ err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ HERMES_TEST_STOP, 0, NULL);
+ }
+ if (err)
+ return err;
+
+ /* Set promiscuity / multicast*/
+ priv->promiscuous = 0;
+ priv->mc_count = 0;
+
+ /* FIXME: what about netif_tx_lock */
+ __orinoco_set_multicast_list(dev);
+
+ return 0;
+}
+
+/* FIXME: return int? */
+static void
+__orinoco_set_multicast_list(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ int promisc, mc_count;
+
+ /* The Hermes doesn't seem to have an allmulti mode, so we go
+ * into promiscuous mode and let the upper levels deal. */
+ if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
+ (dev->mc_count > MAX_MULTICAST(priv)) ) {
+ promisc = 1;
+ mc_count = 0;
+ } else {
+ promisc = 0;
+ mc_count = dev->mc_count;
+ }
+
+ if (promisc != priv->promiscuous) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPROMISCUOUSMODE,
+ promisc);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n",
+ dev->name, err);
+ } else
+ priv->promiscuous = promisc;
+ }
+
+ /* If we're not in promiscuous mode, then we need to set the
+ * group address if either we want to multicast, or if we were
+ * multicasting and want to stop */
+ if (! promisc && (mc_count || priv->mc_count) ) {
+ struct dev_mc_list *p = dev->mc_list;
+ struct hermes_multicast mclist;
+ int i;
+
+ for (i = 0; i < mc_count; i++) {
+ /* paranoia: is list shorter than mc_count? */
+ BUG_ON(! p);
+ /* paranoia: bad address size in list? */
+ BUG_ON(p->dmi_addrlen != ETH_ALEN);
+
+ memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN);
+ p = p->next;
+ }
+
+ if (p)
+ printk(KERN_WARNING "%s: Multicast list is "
+ "longer than mc_count\n", dev->name);
+
+ err = hermes_write_ltv(hw, USER_BAP,
+ HERMES_RID_CNFGROUPADDRESSES,
+ HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN),
+ &mclist);
+ if (err)
+ printk(KERN_ERR "%s: Error %d setting multicast list.\n",
+ dev->name, err);
+ else
+ priv->mc_count = mc_count;
+ }
+}
+
+/* This must be called from user context, without locks held - use
+ * schedule_work() */
+static void orinoco_reset(struct work_struct *work)
+{
+ struct orinoco_private *priv =
+ container_of(work, struct orinoco_private, reset_work);
+ struct net_device *dev = priv->ndev;
+ struct hermes *hw = &priv->hw;
+ int err;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ /* When the hardware becomes available again, whatever
+ * detects that is responsible for re-initializing
+ * it. So no need for anything further */
+ return;
+
+ netif_stop_queue(dev);
+
+ /* Shut off interrupts. Depending on what state the hardware
+ * is in, this might not work, but we'll try anyway */
+ hermes_set_irqmask(hw, 0);
+ hermes_write_regn(hw, EVACK, 0xffff);
+
+ priv->hw_unavailable++;
+ priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */
+ netif_carrier_off(dev);
+
+ orinoco_unlock(priv, &flags);
+
+ /* Scanning support: Cleanup of driver struct */
+ orinoco_clear_scan_results(priv, 0);
+ priv->scan_inprogress = 0;
+
+ if (priv->hard_reset) {
+ err = (*priv->hard_reset)(priv);
+ if (err) {
+ printk(KERN_ERR "%s: orinoco_reset: Error %d "
+ "performing hard reset\n", dev->name, err);
+ goto disable;
+ }
+ }
+
+ err = orinoco_reinit_firmware(dev);
+ if (err) {
+ printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
+ dev->name, err);
+ goto disable;
+ }
+
+ spin_lock_irq(&priv->lock); /* This has to be called from user context */
+
+ priv->hw_unavailable--;
+
+ /* priv->open or priv->hw_unavailable might have changed while
+ * we dropped the lock */
+ if (priv->open && (! priv->hw_unavailable)) {
+ err = __orinoco_up(dev);
+ if (err) {
+ printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n",
+ dev->name, err);
+ } else
+ dev->trans_start = jiffies;
+ }
+
+ spin_unlock_irq(&priv->lock);
+
+ return;
+ disable:
+ hermes_set_irqmask(hw, 0);
+ netif_device_detach(dev);
+ printk(KERN_ERR "%s: Device has been disabled!\n", dev->name);
+}
+
+/********************************************************************/
+/* Interrupt handler */
+/********************************************************************/
+
+static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw)
+{
+ printk(KERN_DEBUG "%s: TICK\n", dev->name);
+}
+
+static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw)
+{
+ /* This seems to happen a fair bit under load, but ignoring it
+ seems to work fine...*/
+ printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n",
+ dev->name);
+}
+
+irqreturn_t orinoco_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int count = MAX_IRQLOOPS_PER_IRQ;
+ u16 evstat, events;
+ /* These are used to detect a runaway interrupt situation */
+ /* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy,
+ * we panic and shut down the hardware */
+ static int last_irq_jiffy = 0; /* jiffies value the last time
+ * we were called */
+ static int loops_this_jiffy = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0) {
+ /* If hw is unavailable - we don't know if the irq was
+ * for us or not */
+ return IRQ_HANDLED;
+ }
+
+ evstat = hermes_read_regn(hw, EVSTAT);
+ events = evstat & hw->inten;
+ if (! events) {
+ orinoco_unlock(priv, &flags);
+ return IRQ_NONE;
+ }
+
+ if (jiffies != last_irq_jiffy)
+ loops_this_jiffy = 0;
+ last_irq_jiffy = jiffies;
+
+ while (events && count--) {
+ if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) {
+ printk(KERN_WARNING "%s: IRQ handler is looping too "
+ "much! Resetting.\n", dev->name);
+ /* Disable interrupts for now */
+ hermes_set_irqmask(hw, 0);
+ schedule_work(&priv->reset_work);
+ break;
+ }
+
+ /* Check the card hasn't been removed */
+ if (! hermes_present(hw)) {
+ DEBUG(0, "orinoco_interrupt(): card removed\n");
+ break;
+ }
+
+ if (events & HERMES_EV_TICK)
+ __orinoco_ev_tick(dev, hw);
+ if (events & HERMES_EV_WTERR)
+ __orinoco_ev_wterr(dev, hw);
+ if (events & HERMES_EV_INFDROP)
+ __orinoco_ev_infdrop(dev, hw);
+ if (events & HERMES_EV_INFO)
+ __orinoco_ev_info(dev, hw);
+ if (events & HERMES_EV_RX)
+ __orinoco_ev_rx(dev, hw);
+ if (events & HERMES_EV_TXEXC)
+ __orinoco_ev_txexc(dev, hw);
+ if (events & HERMES_EV_TX)
+ __orinoco_ev_tx(dev, hw);
+ if (events & HERMES_EV_ALLOC)
+ __orinoco_ev_alloc(dev, hw);
+
+ hermes_write_regn(hw, EVACK, evstat);
+
+ evstat = hermes_read_regn(hw, EVSTAT);
+ events = evstat & hw->inten;
+ };
+
+ orinoco_unlock(priv, &flags);
+ return IRQ_HANDLED;
+}
+
+/********************************************************************/
+/* Initialization */
+/********************************************************************/
+
+struct comp_id {
+ u16 id, variant, major, minor;
+} __attribute__ ((packed));
+
+static inline fwtype_t determine_firmware_type(struct comp_id *nic_id)
+{
+ if (nic_id->id < 0x8000)
+ return FIRMWARE_TYPE_AGERE;
+ else if (nic_id->id == 0x8000 && nic_id->major == 0)
+ return FIRMWARE_TYPE_SYMBOL;
+ else
+ return FIRMWARE_TYPE_INTERSIL;
+}
+
+/* Set priv->firmware type, determine firmware properties */
+static int determine_firmware(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err;
+ struct comp_id nic_id, sta_id;
+ unsigned int firmver;
+ char tmp[SYMBOL_MAX_VER_LEN+1] __attribute__((aligned(2)));
+
+ /* Get the hardware version */
+ err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id);
+ if (err) {
+ printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n",
+ dev->name, err);
+ return err;
+ }
+
+ le16_to_cpus(&nic_id.id);
+ le16_to_cpus(&nic_id.variant);
+ le16_to_cpus(&nic_id.major);
+ le16_to_cpus(&nic_id.minor);
+ printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n",
+ dev->name, nic_id.id, nic_id.variant,
+ nic_id.major, nic_id.minor);
+
+ priv->firmware_type = determine_firmware_type(&nic_id);
+
+ /* Get the firmware version */
+ err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id);
+ if (err) {
+ printk(KERN_ERR "%s: Cannot read station identity: error %d\n",
+ dev->name, err);
+ return err;
+ }
+
+ le16_to_cpus(&sta_id.id);
+ le16_to_cpus(&sta_id.variant);
+ le16_to_cpus(&sta_id.major);
+ le16_to_cpus(&sta_id.minor);
+ printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n",
+ dev->name, sta_id.id, sta_id.variant,
+ sta_id.major, sta_id.minor);
+
+ switch (sta_id.id) {
+ case 0x15:
+ printk(KERN_ERR "%s: Primary firmware is active\n",
+ dev->name);
+ return -ENODEV;
+ case 0x14b:
+ printk(KERN_ERR "%s: Tertiary firmware is active\n",
+ dev->name);
+ return -ENODEV;
+ case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */
+ case 0x21: /* Symbol Spectrum24 Trilogy */
+ break;
+ default:
+ printk(KERN_NOTICE "%s: Unknown station ID, please report\n",
+ dev->name);
+ break;
+ }
+
+ /* Default capabilities */
+ priv->has_sensitivity = 1;
+ priv->has_mwo = 0;
+ priv->has_preamble = 0;
+ priv->has_port3 = 1;
+ priv->has_ibss = 1;
+ priv->has_wep = 0;
+ priv->has_big_wep = 0;
+ priv->has_alt_txcntl = 0;
+ priv->has_ext_scan = 0;
+ priv->has_wpa = 0;
+ priv->do_fw_download = 0;
+
+ /* Determine capabilities from the firmware version */
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout,
+ ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */
+ snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
+ "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor);
+
+ firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor;
+
+ priv->has_ibss = (firmver >= 0x60006);
+ priv->has_wep = (firmver >= 0x40020);
+ priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell
+ Gold cards from the others? */
+ priv->has_mwo = (firmver >= 0x60000);
+ priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */
+ priv->ibss_port = 1;
+ priv->has_hostscan = (firmver >= 0x8000a);
+ priv->do_fw_download = 1;
+ priv->broken_monitor = (firmver >= 0x80000);
+ priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */
+ priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */
+ priv->has_wpa = (firmver >= 0x9002a);
+ /* Tested with Agere firmware :
+ * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II
+ * Tested CableTron firmware : 4.32 => Anton */
+ break;
+ case FIRMWARE_TYPE_SYMBOL:
+ /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */
+ /* Intel MAC : 00:02:B3:* */
+ /* 3Com MAC : 00:50:DA:* */
+ memset(tmp, 0, sizeof(tmp));
+ /* Get the Symbol firmware version */
+ err = hermes_read_ltv(hw, USER_BAP,
+ HERMES_RID_SECONDARYVERSION_SYMBOL,
+ SYMBOL_MAX_VER_LEN, NULL, &tmp);
+ if (err) {
+ printk(KERN_WARNING
+ "%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n",
+ dev->name, err);
+ firmver = 0;
+ tmp[0] = '\0';
+ } else {
+ /* The firmware revision is a string, the format is
+ * something like : "V2.20-01".
+ * Quick and dirty parsing... - Jean II
+ */
+ firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12)
+ | ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4)
+ | (tmp[7] - '0');
+
+ tmp[SYMBOL_MAX_VER_LEN] = '\0';
+ }
+
+ snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
+ "Symbol %s", tmp);
+
+ priv->has_ibss = (firmver >= 0x20000);
+ priv->has_wep = (firmver >= 0x15012);
+ priv->has_big_wep = (firmver >= 0x20000);
+ priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) ||
+ (firmver >= 0x29000 && firmver < 0x30000) ||
+ firmver >= 0x31000;
+ priv->has_preamble = (firmver >= 0x20000);
+ priv->ibss_port = 4;
+
+ /* Symbol firmware is found on various cards, but
+ * there has been no attempt to check firmware
+ * download on non-spectrum_cs based cards.
+ *
+ * Given that the Agere firmware download works
+ * differently, we should avoid doing a firmware
+ * download with the Symbol algorithm on non-spectrum
+ * cards.
+ *
+ * For now we can identify a spectrum_cs based card
+ * because it has a firmware reset function.
+ */
+ priv->do_fw_download = (priv->stop_fw != NULL);
+
+ priv->broken_disableport = (firmver == 0x25013) ||
+ (firmver >= 0x30000 && firmver <= 0x31000);
+ priv->has_hostscan = (firmver >= 0x31001) ||
+ (firmver >= 0x29057 && firmver < 0x30000);
+ /* Tested with Intel firmware : 0x20015 => Jean II */
+ /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ /* D-Link, Linksys, Adtron, ZoomAir, and many others...
+ * Samsung, Compaq 100/200 and Proxim are slightly
+ * different and less well tested */
+ /* D-Link MAC : 00:40:05:* */
+ /* Addtron MAC : 00:90:D1:* */
+ snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
+ "Intersil %d.%d.%d", sta_id.major, sta_id.minor,
+ sta_id.variant);
+
+ firmver = ((unsigned long)sta_id.major << 16) |
+ ((unsigned long)sta_id.minor << 8) | sta_id.variant;
+
+ priv->has_ibss = (firmver >= 0x000700); /* FIXME */
+ priv->has_big_wep = priv->has_wep = (firmver >= 0x000800);
+ priv->has_pm = (firmver >= 0x000700);
+ priv->has_hostscan = (firmver >= 0x010301);
+
+ if (firmver >= 0x000800)
+ priv->ibss_port = 0;
+ else {
+ printk(KERN_NOTICE "%s: Intersil firmware earlier "
+ "than v0.8.x - several features not supported\n",
+ dev->name);
+ priv->ibss_port = 1;
+ }
+ break;
+ }
+ printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name,
+ priv->fw_name);
+
+ return 0;
+}
+
+static int orinoco_init(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ struct hermes_idstring nickbuf;
+ u16 reclen;
+ int len;
+
+ /* No need to lock, the hw_unavailable flag is already set in
+ * alloc_orinocodev() */
+ priv->nicbuf_size = IEEE80211_MAX_FRAME_LEN + ETH_HLEN;
+
+ /* Initialize the firmware */
+ err = hermes_init(hw);
+ if (err != 0) {
+ printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n",
+ dev->name, err);
+ goto out;
+ }
+
+ err = determine_firmware(dev);
+ if (err != 0) {
+ printk(KERN_ERR "%s: Incompatible firmware, aborting\n",
+ dev->name);
+ goto out;
+ }
+
+ if (priv->do_fw_download) {
+ err = orinoco_download(priv);
+ if (err)
+ priv->do_fw_download = 0;
+
+ /* Check firmware version again */
+ err = determine_firmware(dev);
+ if (err != 0) {
+ printk(KERN_ERR "%s: Incompatible firmware, aborting\n",
+ dev->name);
+ goto out;
+ }
+ }
+
+ if (priv->has_port3)
+ printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name);
+ if (priv->has_ibss)
+ printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n",
+ dev->name);
+ if (priv->has_wep) {
+ printk(KERN_DEBUG "%s: WEP supported, ", dev->name);
+ if (priv->has_big_wep)
+ printk("104-bit key\n");
+ else
+ printk("40-bit key\n");
+ }
+ if (priv->has_wpa) {
+ printk(KERN_DEBUG "%s: WPA-PSK supported\n", dev->name);
+ if (orinoco_mic_init(priv)) {
+ printk(KERN_ERR "%s: Failed to setup MIC crypto "
+ "algorithm. Disabling WPA support\n", dev->name);
+ priv->has_wpa = 0;
+ }
+ }
+
+ /* Now we have the firmware capabilities, allocate appropiate
+ * sized scan buffers */
+ if (orinoco_bss_data_allocate(priv))
+ goto out;
+ orinoco_bss_data_init(priv);
+
+ /* Get the MAC address */
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
+ ETH_ALEN, NULL, dev->dev_addr);
+ if (err) {
+ printk(KERN_WARNING "%s: failed to read MAC address!\n",
+ dev->name);
+ goto out;
+ }
+
+ printk(KERN_DEBUG "%s: MAC address %pM\n",
+ dev->name, dev->dev_addr);
+
+ /* Get the station name */
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
+ sizeof(nickbuf), &reclen, &nickbuf);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read station name\n",
+ dev->name);
+ goto out;
+ }
+ if (nickbuf.len)
+ len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len));
+ else
+ len = min(IW_ESSID_MAX_SIZE, 2 * reclen);
+ memcpy(priv->nick, &nickbuf.val, len);
+ priv->nick[len] = '\0';
+
+ printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick);
+
+ err = orinoco_allocate_fid(dev);
+ if (err) {
+ printk(KERN_ERR "%s: failed to allocate NIC buffer!\n",
+ dev->name);
+ goto out;
+ }
+
+ /* Get allowed channels */
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST,
+ &priv->channel_mask);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read channel list!\n",
+ dev->name);
+ goto out;
+ }
+
+ /* Get initial AP density */
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE,
+ &priv->ap_density);
+ if (err || priv->ap_density < 1 || priv->ap_density > 3) {
+ priv->has_sensitivity = 0;
+ }
+
+ /* Get initial RTS threshold */
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
+ &priv->rts_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read RTS threshold!\n",
+ dev->name);
+ goto out;
+ }
+
+ /* Get initial fragmentation settings */
+ if (priv->has_mwo)
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMWOROBUST_AGERE,
+ &priv->mwo_robust);
+ else
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
+ &priv->frag_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read fragmentation settings!\n",
+ dev->name);
+ goto out;
+ }
+
+ /* Power management setup */
+ if (priv->has_pm) {
+ priv->pm_on = 0;
+ priv->pm_mcast = 1;
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMAXSLEEPDURATION,
+ &priv->pm_period);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read power management period!\n",
+ dev->name);
+ goto out;
+ }
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPMHOLDOVERDURATION,
+ &priv->pm_timeout);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read power management timeout!\n",
+ dev->name);
+ goto out;
+ }
+ }
+
+ /* Preamble setup */
+ if (priv->has_preamble) {
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPREAMBLE_SYMBOL,
+ &priv->preamble);
+ if (err)
+ goto out;
+ }
+
+ /* Set up the default configuration */
+ priv->iw_mode = IW_MODE_INFRA;
+ /* By default use IEEE/IBSS ad-hoc mode if we have it */
+ priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss);
+ set_port_type(priv);
+ priv->channel = 0; /* use firmware default */
+
+ priv->promiscuous = 0;
+ priv->encode_alg = IW_ENCODE_ALG_NONE;
+ priv->tx_key = 0;
+ priv->wpa_enabled = 0;
+ priv->tkip_cm_active = 0;
+ priv->key_mgmt = 0;
+ priv->wpa_ie_len = 0;
+ priv->wpa_ie = NULL;
+
+ /* Make the hardware available, as long as it hasn't been
+ * removed elsewhere (e.g. by PCMCIA hot unplug) */
+ spin_lock_irq(&priv->lock);
+ priv->hw_unavailable--;
+ spin_unlock_irq(&priv->lock);
+
+ printk(KERN_DEBUG "%s: ready\n", dev->name);
+
+ out:
+ return err;
+}
+
+struct net_device
+*alloc_orinocodev(int sizeof_card,
+ struct device *device,
+ int (*hard_reset)(struct orinoco_private *),
+ int (*stop_fw)(struct orinoco_private *, int))
+{
+ struct net_device *dev;
+ struct orinoco_private *priv;
+
+ dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card);
+ if (! dev)
+ return NULL;
+ priv = netdev_priv(dev);
+ priv->ndev = dev;
+ if (sizeof_card)
+ priv->card = (void *)((unsigned long)priv
+ + sizeof(struct orinoco_private));
+ else
+ priv->card = NULL;
+ priv->dev = device;
+
+ /* Setup / override net_device fields */
+ dev->init = orinoco_init;
+ dev->hard_start_xmit = orinoco_xmit;
+ dev->tx_timeout = orinoco_tx_timeout;
+ dev->watchdog_timeo = HZ; /* 1 second timeout */
+ dev->get_stats = orinoco_get_stats;
+ dev->ethtool_ops = &orinoco_ethtool_ops;
+ dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def;
+#ifdef WIRELESS_SPY
+ priv->wireless_data.spy_data = &priv->spy_data;
+ dev->wireless_data = &priv->wireless_data;
+#endif
+ dev->change_mtu = orinoco_change_mtu;
+ dev->set_multicast_list = orinoco_set_multicast_list;
+ /* we use the default eth_mac_addr for setting the MAC addr */
+
+ /* Reserve space in skb for the SNAP header */
+ dev->hard_header_len += ENCAPS_OVERHEAD;
+
+ /* Set up default callbacks */
+ dev->open = orinoco_open;
+ dev->stop = orinoco_stop;
+ priv->hard_reset = hard_reset;
+ priv->stop_fw = stop_fw;
+
+ spin_lock_init(&priv->lock);
+ priv->open = 0;
+ priv->hw_unavailable = 1; /* orinoco_init() must clear this
+ * before anything else touches the
+ * hardware */
+ INIT_WORK(&priv->reset_work, orinoco_reset);
+ INIT_WORK(&priv->join_work, orinoco_join_ap);
+ INIT_WORK(&priv->wevent_work, orinoco_send_wevents);
+
+ INIT_LIST_HEAD(&priv->rx_list);
+ tasklet_init(&priv->rx_tasklet, orinoco_rx_isr_tasklet,
+ (unsigned long) dev);
+
+ netif_carrier_off(dev);
+ priv->last_linkstatus = 0xffff;
+
+ priv->cached_fw = NULL;
+
+ return dev;
+}
+
+void free_orinocodev(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ /* No need to empty priv->rx_list: if the tasklet is scheduled
+ * when we call tasklet_kill it will run one final time,
+ * emptying the list */
+ tasklet_kill(&priv->rx_tasklet);
+ if (priv->cached_fw)
+ release_firmware(priv->cached_fw);
+ priv->cached_fw = NULL;
+ priv->wpa_ie_len = 0;
+ kfree(priv->wpa_ie);
+ orinoco_mic_free(priv);
+ orinoco_bss_data_free(priv);
+ free_netdev(dev);
+}
+
+/********************************************************************/
+/* Wireless extensions */
+/********************************************************************/
+
+/* Return : < 0 -> error code ; >= 0 -> length */
+static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
+ char buf[IW_ESSID_MAX_SIZE+1])
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ struct hermes_idstring essidbuf;
+ char *p = (char *)(&essidbuf.val);
+ int len;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (strlen(priv->desired_essid) > 0) {
+ /* We read the desired SSID from the hardware rather
+ than from priv->desired_essid, just in case the
+ firmware is allowed to change it on us. I'm not
+ sure about this */
+ /* My guess is that the OWNSSID should always be whatever
+ * we set to the card, whereas CURRENT_SSID is the one that
+ * may change... - Jean II */
+ u16 rid;
+
+ *active = 1;
+
+ rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID :
+ HERMES_RID_CNFDESIREDSSID;
+
+ err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf),
+ NULL, &essidbuf);
+ if (err)
+ goto fail_unlock;
+ } else {
+ *active = 0;
+
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID,
+ sizeof(essidbuf), NULL, &essidbuf);
+ if (err)
+ goto fail_unlock;
+ }
+
+ len = le16_to_cpu(essidbuf.len);
+ BUG_ON(len > IW_ESSID_MAX_SIZE);
+
+ memset(buf, 0, IW_ESSID_MAX_SIZE);
+ memcpy(buf, p, len);
+ err = len;
+
+ fail_unlock:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static long orinoco_hw_get_freq(struct orinoco_private *priv)
+{
+
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u16 channel;
+ long freq = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel);
+ if (err)
+ goto out;
+
+ /* Intersil firmware 1.3.5 returns 0 when the interface is down */
+ if (channel == 0) {
+ err = -EBUSY;
+ goto out;
+ }
+
+ if ( (channel < 1) || (channel > NUM_CHANNELS) ) {
+ printk(KERN_WARNING "%s: Channel out of range (%d)!\n",
+ priv->ndev->name, channel);
+ err = -EBUSY;
+ goto out;
+
+ }
+ freq = channel_frequency[channel-1] * 100000;
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ if (err > 0)
+ err = -EBUSY;
+ return err ? err : freq;
+}
+
+static int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
+ int *numrates, s32 *rates, int max)
+{
+ hermes_t *hw = &priv->hw;
+ struct hermes_idstring list;
+ unsigned char *p = (unsigned char *)&list.val;
+ int err = 0;
+ int num;
+ int i;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES,
+ sizeof(list), NULL, &list);
+ orinoco_unlock(priv, &flags);
+
+ if (err)
+ return err;
+
+ num = le16_to_cpu(list.len);
+ *numrates = num;
+ num = min(num, max);
+
+ for (i = 0; i < num; i++) {
+ rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */
+ }
+
+ return 0;
+}
+
+static int orinoco_ioctl_getname(struct net_device *dev,
+ struct iw_request_info *info,
+ char *name,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int numrates;
+ int err;
+
+ err = orinoco_hw_get_bitratelist(priv, &numrates, NULL, 0);
+
+ if (!err && (numrates > 2))
+ strcpy(name, "IEEE 802.11b");
+ else
+ strcpy(name, "IEEE 802.11-DS");
+
+ return 0;
+}
+
+static int orinoco_ioctl_setwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = -EINPROGRESS; /* Call commit handler */
+ unsigned long flags;
+ static const u8 off_addr[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ static const u8 any_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ /* Enable automatic roaming - no sanity checks are needed */
+ if (memcmp(&ap_addr->sa_data, off_addr, ETH_ALEN) == 0 ||
+ memcmp(&ap_addr->sa_data, any_addr, ETH_ALEN) == 0) {
+ priv->bssid_fixed = 0;
+ memset(priv->desired_bssid, 0, ETH_ALEN);
+
+ /* "off" means keep existing connection */
+ if (ap_addr->sa_data[0] == 0) {
+ __orinoco_hw_set_wap(priv);
+ err = 0;
+ }
+ goto out;
+ }
+
+ if (priv->firmware_type == FIRMWARE_TYPE_AGERE) {
+ printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't "
+ "support manual roaming\n",
+ dev->name);
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ if (priv->iw_mode != IW_MODE_INFRA) {
+ printk(KERN_WARNING "%s: Manual roaming supported only in "
+ "managed mode\n", dev->name);
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ /* Intersil firmware hangs without Desired ESSID */
+ if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL &&
+ strlen(priv->desired_essid) == 0) {
+ printk(KERN_WARNING "%s: Desired ESSID must be set for "
+ "manual roaming\n", dev->name);
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ /* Finally, enable manual roaming */
+ priv->bssid_fixed = 1;
+ memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN);
+
+ out:
+ orinoco_unlock(priv, &flags);
+ return err;
+}
+
+static int orinoco_ioctl_getwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ ap_addr->sa_family = ARPHRD_ETHER;
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
+ ETH_ALEN, NULL, ap_addr->sa_data);
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_setmode(struct net_device *dev,
+ struct iw_request_info *info,
+ u32 *mode,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = -EINPROGRESS; /* Call commit handler */
+ unsigned long flags;
+
+ if (priv->iw_mode == *mode)
+ return 0;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ switch (*mode) {
+ case IW_MODE_ADHOC:
+ if (!priv->has_ibss && !priv->has_port3)
+ err = -EOPNOTSUPP;
+ break;
+
+ case IW_MODE_INFRA:
+ break;
+
+ case IW_MODE_MONITOR:
+ if (priv->broken_monitor && !force_monitor) {
+ printk(KERN_WARNING "%s: Monitor mode support is "
+ "buggy in this firmware, not enabling\n",
+ dev->name);
+ err = -EOPNOTSUPP;
+ }
+ break;
+
+ default:
+ err = -EOPNOTSUPP;
+ break;
+ }
+
+ if (err == -EINPROGRESS) {
+ priv->iw_mode = *mode;
+ set_port_type(priv);
+ }
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getmode(struct net_device *dev,
+ struct iw_request_info *info,
+ u32 *mode,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ *mode = priv->iw_mode;
+ return 0;
+}
+
+static int orinoco_ioctl_getiwrange(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *rrq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+ struct iw_range *range = (struct iw_range *) extra;
+ int numrates;
+ int i, k;
+
+ rrq->length = sizeof(struct iw_range);
+ memset(range, 0, sizeof(struct iw_range));
+
+ range->we_version_compiled = WIRELESS_EXT;
+ range->we_version_source = 22;
+
+ /* Set available channels/frequencies */
+ range->num_channels = NUM_CHANNELS;
+ k = 0;
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ if (priv->channel_mask & (1 << i)) {
+ range->freq[k].i = i + 1;
+ range->freq[k].m = channel_frequency[i] * 100000;
+ range->freq[k].e = 1;
+ k++;
+ }
+
+ if (k >= IW_MAX_FREQUENCIES)
+ break;
+ }
+ range->num_frequency = k;
+ range->sensitivity = 3;
+
+ if (priv->has_wep) {
+ range->max_encoding_tokens = ORINOCO_MAX_KEYS;
+ range->encoding_size[0] = SMALL_KEY_SIZE;
+ range->num_encoding_sizes = 1;
+
+ if (priv->has_big_wep) {
+ range->encoding_size[1] = LARGE_KEY_SIZE;
+ range->num_encoding_sizes = 2;
+ }
+ }
+
+ if (priv->has_wpa)
+ range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_CIPHER_TKIP;
+
+ if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){
+ /* Quality stats meaningless in ad-hoc mode */
+ } else {
+ range->max_qual.qual = 0x8b - 0x2f;
+ range->max_qual.level = 0x2f - 0x95 - 1;
+ range->max_qual.noise = 0x2f - 0x95 - 1;
+ /* Need to get better values */
+ range->avg_qual.qual = 0x24;
+ range->avg_qual.level = 0xC2;
+ range->avg_qual.noise = 0x9E;
+ }
+
+ err = orinoco_hw_get_bitratelist(priv, &numrates,
+ range->bitrate, IW_MAX_BITRATES);
+ if (err)
+ return err;
+ range->num_bitrates = numrates;
+
+ /* Set an indication of the max TCP throughput in bit/s that we can
+ * expect using this interface. May be use for QoS stuff...
+ * Jean II */
+ if (numrates > 2)
+ range->throughput = 5 * 1000 * 1000; /* ~5 Mb/s */
+ else
+ range->throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */
+
+ range->min_rts = 0;
+ range->max_rts = 2347;
+ range->min_frag = 256;
+ range->max_frag = 2346;
+
+ range->min_pmp = 0;
+ range->max_pmp = 65535000;
+ range->min_pmt = 0;
+ range->max_pmt = 65535 * 1000; /* ??? */
+ range->pmp_flags = IW_POWER_PERIOD;
+ range->pmt_flags = IW_POWER_TIMEOUT;
+ range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R;
+
+ range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
+ range->retry_flags = IW_RETRY_LIMIT;
+ range->r_time_flags = IW_RETRY_LIFETIME;
+ range->min_retry = 0;
+ range->max_retry = 65535; /* ??? */
+ range->min_r_time = 0;
+ range->max_r_time = 65535 * 1000; /* ??? */
+
+ if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
+ range->scan_capa = IW_SCAN_CAPA_ESSID;
+ else
+ range->scan_capa = IW_SCAN_CAPA_NONE;
+
+ /* Event capability (kernel) */
+ IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
+ /* Event capability (driver) */
+ IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY);
+ IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
+ IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
+ IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP);
+
+ return 0;
+}
+
+static int orinoco_ioctl_setiwencode(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq,
+ char *keybuf)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int index = (erq->flags & IW_ENCODE_INDEX) - 1;
+ int setindex = priv->tx_key;
+ int encode_alg = priv->encode_alg;
+ int restricted = priv->wep_restrict;
+ u16 xlen = 0;
+ int err = -EINPROGRESS; /* Call commit handler */
+ unsigned long flags;
+
+ if (! priv->has_wep)
+ return -EOPNOTSUPP;
+
+ if (erq->pointer) {
+ /* We actually have a key to set - check its length */
+ if (erq->length > LARGE_KEY_SIZE)
+ return -E2BIG;
+
+ if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep )
+ return -E2BIG;
+ }
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ /* Clear any TKIP key we have */
+ if ((priv->has_wpa) && (priv->encode_alg == IW_ENCODE_ALG_TKIP))
+ (void) orinoco_clear_tkip_key(priv, setindex);
+
+ if (erq->length > 0) {
+ if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
+ index = priv->tx_key;
+
+ /* Adjust key length to a supported value */
+ if (erq->length > SMALL_KEY_SIZE) {
+ xlen = LARGE_KEY_SIZE;
+ } else if (erq->length > 0) {
+ xlen = SMALL_KEY_SIZE;
+ } else
+ xlen = 0;
+
+ /* Switch on WEP if off */
+ if ((encode_alg != IW_ENCODE_ALG_WEP) && (xlen > 0)) {
+ setindex = index;
+ encode_alg = IW_ENCODE_ALG_WEP;
+ }
+ } else {
+ /* Important note : if the user do "iwconfig eth0 enc off",
+ * we will arrive there with an index of -1. This is valid
+ * but need to be taken care off... Jean II */
+ if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) {
+ if((index != -1) || (erq->flags == 0)) {
+ err = -EINVAL;
+ goto out;
+ }
+ } else {
+ /* Set the index : Check that the key is valid */
+ if(priv->keys[index].len == 0) {
+ err = -EINVAL;
+ goto out;
+ }
+ setindex = index;
+ }
+ }
+
+ if (erq->flags & IW_ENCODE_DISABLED)
+ encode_alg = IW_ENCODE_ALG_NONE;
+ if (erq->flags & IW_ENCODE_OPEN)
+ restricted = 0;
+ if (erq->flags & IW_ENCODE_RESTRICTED)
+ restricted = 1;
+
+ if (erq->pointer && erq->length > 0) {
+ priv->keys[index].len = cpu_to_le16(xlen);
+ memset(priv->keys[index].data, 0,
+ sizeof(priv->keys[index].data));
+ memcpy(priv->keys[index].data, keybuf, erq->length);
+ }
+ priv->tx_key = setindex;
+
+ /* Try fast key change if connected and only keys are changed */
+ if ((priv->encode_alg == encode_alg) &&
+ (priv->wep_restrict == restricted) &&
+ netif_carrier_ok(dev)) {
+ err = __orinoco_hw_setup_wepkeys(priv);
+ /* No need to commit if successful */
+ goto out;
+ }
+
+ priv->encode_alg = encode_alg;
+ priv->wep_restrict = restricted;
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getiwencode(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq,
+ char *keybuf)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int index = (erq->flags & IW_ENCODE_INDEX) - 1;
+ u16 xlen = 0;
+ unsigned long flags;
+
+ if (! priv->has_wep)
+ return -EOPNOTSUPP;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
+ index = priv->tx_key;
+
+ erq->flags = 0;
+ if (!priv->encode_alg)
+ erq->flags |= IW_ENCODE_DISABLED;
+ erq->flags |= index + 1;
+
+ if (priv->wep_restrict)
+ erq->flags |= IW_ENCODE_RESTRICTED;
+ else
+ erq->flags |= IW_ENCODE_OPEN;
+
+ xlen = le16_to_cpu(priv->keys[index].len);
+
+ erq->length = xlen;
+
+ memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE);
+
+ orinoco_unlock(priv, &flags);
+ return 0;
+}
+
+static int orinoco_ioctl_setessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq,
+ char *essidbuf)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it
+ * anyway... - Jean II */
+
+ /* Hum... Should not use Wireless Extension constant (may change),
+ * should use our own... - Jean II */
+ if (erq->length > IW_ESSID_MAX_SIZE)
+ return -E2BIG;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ /* NULL the string (for NULL termination & ESSID = ANY) - Jean II */
+ memset(priv->desired_essid, 0, sizeof(priv->desired_essid));
+
+ /* If not ANY, get the new ESSID */
+ if (erq->flags) {
+ memcpy(priv->desired_essid, essidbuf, erq->length);
+ }
+
+ orinoco_unlock(priv, &flags);
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+static int orinoco_ioctl_getessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq,
+ char *essidbuf)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int active;
+ int err = 0;
+ unsigned long flags;
+
+ if (netif_running(dev)) {
+ err = orinoco_hw_get_essid(priv, &active, essidbuf);
+ if (err < 0)
+ return err;
+ erq->length = err;
+ } else {
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE);
+ erq->length = strlen(priv->desired_essid);
+ orinoco_unlock(priv, &flags);
+ }
+
+ erq->flags = 1;
+
+ return 0;
+}
+
+static int orinoco_ioctl_setnick(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *nrq,
+ char *nickbuf)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ if (nrq->length > IW_ESSID_MAX_SIZE)
+ return -E2BIG;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ memset(priv->nick, 0, sizeof(priv->nick));
+ memcpy(priv->nick, nickbuf, nrq->length);
+
+ orinoco_unlock(priv, &flags);
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+static int orinoco_ioctl_getnick(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *nrq,
+ char *nickbuf)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE);
+ orinoco_unlock(priv, &flags);
+
+ nrq->length = strlen(priv->nick);
+
+ return 0;
+}
+
+static int orinoco_ioctl_setfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *frq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int chan = -1;
+ unsigned long flags;
+ int err = -EINPROGRESS; /* Call commit handler */
+
+ /* In infrastructure mode the AP sets the channel */
+ if (priv->iw_mode == IW_MODE_INFRA)
+ return -EBUSY;
+
+ if ( (frq->e == 0) && (frq->m <= 1000) ) {
+ /* Setting by channel number */
+ chan = frq->m;
+ } else {
+ /* Setting by frequency - search the table */
+ int mult = 1;
+ int i;
+
+ for (i = 0; i < (6 - frq->e); i++)
+ mult *= 10;
+
+ for (i = 0; i < NUM_CHANNELS; i++)
+ if (frq->m == (channel_frequency[i] * mult))
+ chan = i+1;
+ }
+
+ if ( (chan < 1) || (chan > NUM_CHANNELS) ||
+ ! (priv->channel_mask & (1 << (chan-1)) ) )
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ priv->channel = chan;
+ if (priv->iw_mode == IW_MODE_MONITOR) {
+ /* Fast channel change - no commit if successful */
+ hermes_t *hw = &priv->hw;
+ err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ HERMES_TEST_SET_CHANNEL,
+ chan, NULL);
+ }
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *frq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int tmp;
+
+ /* Locking done in there */
+ tmp = orinoco_hw_get_freq(priv);
+ if (tmp < 0) {
+ return tmp;
+ }
+
+ frq->m = tmp;
+ frq->e = 1;
+
+ return 0;
+}
+
+static int orinoco_ioctl_getsens(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *srq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ u16 val;
+ int err;
+ unsigned long flags;
+
+ if (!priv->has_sensitivity)
+ return -EOPNOTSUPP;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSYSTEMSCALE, &val);
+ orinoco_unlock(priv, &flags);
+
+ if (err)
+ return err;
+
+ srq->value = val;
+ srq->fixed = 0; /* auto */
+
+ return 0;
+}
+
+static int orinoco_ioctl_setsens(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *srq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int val = srq->value;
+ unsigned long flags;
+
+ if (!priv->has_sensitivity)
+ return -EOPNOTSUPP;
+
+ if ((val < 1) || (val > 3))
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ priv->ap_density = val;
+ orinoco_unlock(priv, &flags);
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+static int orinoco_ioctl_setrts(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int val = rrq->value;
+ unsigned long flags;
+
+ if (rrq->disabled)
+ val = 2347;
+
+ if ( (val < 0) || (val > 2347) )
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ priv->rts_thresh = val;
+ orinoco_unlock(priv, &flags);
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+static int orinoco_ioctl_getrts(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ rrq->value = priv->rts_thresh;
+ rrq->disabled = (rrq->value == 2347);
+ rrq->fixed = 1;
+
+ return 0;
+}
+
+static int orinoco_ioctl_setfrag(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *frq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = -EINPROGRESS; /* Call commit handler */
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (priv->has_mwo) {
+ if (frq->disabled)
+ priv->mwo_robust = 0;
+ else {
+ if (frq->fixed)
+ printk(KERN_WARNING "%s: Fixed fragmentation is "
+ "not supported on this firmware. "
+ "Using MWO robust instead.\n", dev->name);
+ priv->mwo_robust = 1;
+ }
+ } else {
+ if (frq->disabled)
+ priv->frag_thresh = 2346;
+ else {
+ if ( (frq->value < 256) || (frq->value > 2346) )
+ err = -EINVAL;
+ else
+ priv->frag_thresh = frq->value & ~0x1; /* must be even */
+ }
+ }
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getfrag(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *frq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err;
+ u16 val;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (priv->has_mwo) {
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMWOROBUST_AGERE,
+ &val);
+ if (err)
+ val = 0;
+
+ frq->value = val ? 2347 : 0;
+ frq->disabled = ! val;
+ frq->fixed = 0;
+ } else {
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
+ &val);
+ if (err)
+ val = 0;
+
+ frq->value = val;
+ frq->disabled = (val >= 2346);
+ frq->fixed = 1;
+ }
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_setrate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int ratemode = -1;
+ int bitrate; /* 100s of kilobits */
+ int i;
+ unsigned long flags;
+
+ /* As the user space doesn't know our highest rate, it uses -1
+ * to ask us to set the highest rate. Test it using "iwconfig
+ * ethX rate auto" - Jean II */
+ if (rrq->value == -1)
+ bitrate = 110;
+ else {
+ if (rrq->value % 100000)
+ return -EINVAL;
+ bitrate = rrq->value / 100000;
+ }
+
+ if ( (bitrate != 10) && (bitrate != 20) &&
+ (bitrate != 55) && (bitrate != 110) )
+ return -EINVAL;
+
+ for (i = 0; i < BITRATE_TABLE_SIZE; i++)
+ if ( (bitrate_table[i].bitrate == bitrate) &&
+ (bitrate_table[i].automatic == ! rrq->fixed) ) {
+ ratemode = i;
+ break;
+ }
+
+ if (ratemode == -1)
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ priv->bitratemode = ratemode;
+ orinoco_unlock(priv, &flags);
+
+ return -EINPROGRESS;
+}
+
+static int orinoco_ioctl_getrate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ int ratemode;
+ int i;
+ u16 val;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ ratemode = priv->bitratemode;
+
+ BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE));
+
+ rrq->value = bitrate_table[ratemode].bitrate * 100000;
+ rrq->fixed = ! bitrate_table[ratemode].automatic;
+ rrq->disabled = 0;
+
+ /* If the interface is running we try to find more about the
+ current mode */
+ if (netif_running(dev)) {
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CURRENTTXRATE, &val);
+ if (err)
+ goto out;
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE: /* Lucent style rate */
+ /* Note : in Lucent firmware, the return value of
+ * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s,
+ * and therefore is totally different from the
+ * encoding of HERMES_RID_CNFTXRATECONTROL.
+ * Don't forget that 6Mb/s is really 5.5Mb/s */
+ if (val == 6)
+ rrq->value = 5500000;
+ else
+ rrq->value = val * 1000000;
+ break;
+ case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */
+ case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */
+ for (i = 0; i < BITRATE_TABLE_SIZE; i++)
+ if (bitrate_table[i].intersil_txratectrl == val) {
+ ratemode = i;
+ break;
+ }
+ if (i >= BITRATE_TABLE_SIZE)
+ printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n",
+ dev->name, val);
+
+ rrq->value = bitrate_table[ratemode].bitrate * 100000;
+ break;
+ default:
+ BUG();
+ }
+ }
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_setpower(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *prq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = -EINPROGRESS; /* Call commit handler */
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (prq->disabled) {
+ priv->pm_on = 0;
+ } else {
+ switch (prq->flags & IW_POWER_MODE) {
+ case IW_POWER_UNICAST_R:
+ priv->pm_mcast = 0;
+ priv->pm_on = 1;
+ break;
+ case IW_POWER_ALL_R:
+ priv->pm_mcast = 1;
+ priv->pm_on = 1;
+ break;
+ case IW_POWER_ON:
+ /* No flags : but we may have a value - Jean II */
+ break;
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (prq->flags & IW_POWER_TIMEOUT) {
+ priv->pm_on = 1;
+ priv->pm_timeout = prq->value / 1000;
+ }
+ if (prq->flags & IW_POWER_PERIOD) {
+ priv->pm_on = 1;
+ priv->pm_period = prq->value / 1000;
+ }
+ /* It's valid to not have a value if we are just toggling
+ * the flags... Jean II */
+ if(!priv->pm_on) {
+ err = -EINVAL;
+ goto out;
+ }
+ }
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getpower(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *prq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u16 enable, period, timeout, mcast;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable);
+ if (err)
+ goto out;
+
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMAXSLEEPDURATION, &period);
+ if (err)
+ goto out;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout);
+ if (err)
+ goto out;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast);
+ if (err)
+ goto out;
+
+ prq->disabled = !enable;
+ /* Note : by default, display the period */
+ if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
+ prq->flags = IW_POWER_TIMEOUT;
+ prq->value = timeout * 1000;
+ } else {
+ prq->flags = IW_POWER_PERIOD;
+ prq->value = period * 1000;
+ }
+ if (mcast)
+ prq->flags |= IW_POWER_ALL_R;
+ else
+ prq->flags |= IW_POWER_UNICAST_R;
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_set_encodeext(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct iw_point *encoding = &wrqu->encoding;
+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+ int idx, alg = ext->alg, set_key = 1;
+ unsigned long flags;
+ int err = -EINVAL;
+ u16 key_len;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ /* Determine and validate the key index */
+ idx = encoding->flags & IW_ENCODE_INDEX;
+ if (idx) {
+ if ((idx < 1) || (idx > 4))
+ goto out;
+ idx--;
+ } else
+ idx = priv->tx_key;
+
+ if (encoding->flags & IW_ENCODE_DISABLED)
+ alg = IW_ENCODE_ALG_NONE;
+
+ if (priv->has_wpa && (alg != IW_ENCODE_ALG_TKIP)) {
+ /* Clear any TKIP TX key we had */
+ (void) orinoco_clear_tkip_key(priv, priv->tx_key);
+ }
+
+ if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+ priv->tx_key = idx;
+ set_key = ((alg == IW_ENCODE_ALG_TKIP) ||
+ (ext->key_len > 0)) ? 1 : 0;
+ }
+
+ if (set_key) {
+ /* Set the requested key first */
+ switch (alg) {
+ case IW_ENCODE_ALG_NONE:
+ priv->encode_alg = alg;
+ priv->keys[idx].len = 0;
+ break;
+
+ case IW_ENCODE_ALG_WEP:
+ if (ext->key_len > SMALL_KEY_SIZE)
+ key_len = LARGE_KEY_SIZE;
+ else if (ext->key_len > 0)
+ key_len = SMALL_KEY_SIZE;
+ else
+ goto out;
+
+ priv->encode_alg = alg;
+ priv->keys[idx].len = cpu_to_le16(key_len);
+
+ key_len = min(ext->key_len, key_len);
+
+ memset(priv->keys[idx].data, 0, ORINOCO_MAX_KEY_SIZE);
+ memcpy(priv->keys[idx].data, ext->key, key_len);
+ break;
+
+ case IW_ENCODE_ALG_TKIP:
+ {
+ hermes_t *hw = &priv->hw;
+ u8 *tkip_iv = NULL;
+
+ if (!priv->has_wpa ||
+ (ext->key_len > sizeof(priv->tkip_key[0])))
+ goto out;
+
+ priv->encode_alg = alg;
+ memset(&priv->tkip_key[idx], 0,
+ sizeof(priv->tkip_key[idx]));
+ memcpy(&priv->tkip_key[idx], ext->key, ext->key_len);
+
+ if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID)
+ tkip_iv = &ext->rx_seq[0];
+
+ err = __orinoco_hw_set_tkip_key(hw, idx,
+ ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY,
+ (u8 *) &priv->tkip_key[idx],
+ tkip_iv, NULL);
+ if (err)
+ printk(KERN_ERR "%s: Error %d setting TKIP key"
+ "\n", dev->name, err);
+
+ goto out;
+ }
+ default:
+ goto out;
+ }
+ }
+ err = -EINPROGRESS;
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_get_encodeext(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct iw_point *encoding = &wrqu->encoding;
+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+ int idx, max_key_len;
+ unsigned long flags;
+ int err;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = -EINVAL;
+ max_key_len = encoding->length - sizeof(*ext);
+ if (max_key_len < 0)
+ goto out;
+
+ idx = encoding->flags & IW_ENCODE_INDEX;
+ if (idx) {
+ if ((idx < 1) || (idx > 4))
+ goto out;
+ idx--;
+ } else
+ idx = priv->tx_key;
+
+ encoding->flags = idx + 1;
+ memset(ext, 0, sizeof(*ext));
+
+ ext->alg = priv->encode_alg;
+ switch (priv->encode_alg) {
+ case IW_ENCODE_ALG_NONE:
+ ext->key_len = 0;
+ encoding->flags |= IW_ENCODE_DISABLED;
+ break;
+ case IW_ENCODE_ALG_WEP:
+ ext->key_len = min_t(u16, le16_to_cpu(priv->keys[idx].len),
+ max_key_len);
+ memcpy(ext->key, priv->keys[idx].data, ext->key_len);
+ encoding->flags |= IW_ENCODE_ENABLED;
+ break;
+ case IW_ENCODE_ALG_TKIP:
+ ext->key_len = min_t(u16, sizeof(struct orinoco_tkip_key),
+ max_key_len);
+ memcpy(ext->key, &priv->tkip_key[idx], ext->key_len);
+ encoding->flags |= IW_ENCODE_ENABLED;
+ break;
+ }
+
+ err = 0;
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_set_auth(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ struct iw_param *param = &wrqu->param;
+ unsigned long flags;
+ int ret = -EINPROGRESS;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ switch (param->flags & IW_AUTH_INDEX) {
+ case IW_AUTH_WPA_VERSION:
+ case IW_AUTH_CIPHER_PAIRWISE:
+ case IW_AUTH_CIPHER_GROUP:
+ case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+ case IW_AUTH_PRIVACY_INVOKED:
+ case IW_AUTH_DROP_UNENCRYPTED:
+ /*
+ * orinoco does not use these parameters
+ */
+ break;
+
+ case IW_AUTH_KEY_MGMT:
+ /* wl_lkm implies value 2 == PSK for Hermes I
+ * which ties in with WEXT
+ * no other hints tho :(
+ */
+ priv->key_mgmt = param->value;
+ break;
+
+ case IW_AUTH_TKIP_COUNTERMEASURES:
+ /* When countermeasures are enabled, shut down the
+ * card; when disabled, re-enable the card. This must
+ * take effect immediately.
+ *
+ * TODO: Make sure that the EAPOL message is getting
+ * out before card disabled
+ */
+ if (param->value) {
+ priv->tkip_cm_active = 1;
+ ret = hermes_enable_port(hw, 0);
+ } else {
+ priv->tkip_cm_active = 0;
+ ret = hermes_disable_port(hw, 0);
+ }
+ break;
+
+ case IW_AUTH_80211_AUTH_ALG:
+ if (param->value & IW_AUTH_ALG_SHARED_KEY)
+ priv->wep_restrict = 1;
+ else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM)
+ priv->wep_restrict = 0;
+ else
+ ret = -EINVAL;
+ break;
+
+ case IW_AUTH_WPA_ENABLED:
+ if (priv->has_wpa) {
+ priv->wpa_enabled = param->value ? 1 : 0;
+ } else {
+ if (param->value)
+ ret = -EOPNOTSUPP;
+ /* else silently accept disable of WPA */
+ priv->wpa_enabled = 0;
+ }
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ orinoco_unlock(priv, &flags);
+ return ret;
+}
+
+static int orinoco_ioctl_get_auth(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct iw_param *param = &wrqu->param;
+ unsigned long flags;
+ int ret = 0;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ switch (param->flags & IW_AUTH_INDEX) {
+ case IW_AUTH_KEY_MGMT:
+ param->value = priv->key_mgmt;
+ break;
+
+ case IW_AUTH_TKIP_COUNTERMEASURES:
+ param->value = priv->tkip_cm_active;
+ break;
+
+ case IW_AUTH_80211_AUTH_ALG:
+ if (priv->wep_restrict)
+ param->value = IW_AUTH_ALG_SHARED_KEY;
+ else
+ param->value = IW_AUTH_ALG_OPEN_SYSTEM;
+ break;
+
+ case IW_AUTH_WPA_ENABLED:
+ param->value = priv->wpa_enabled;
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ orinoco_unlock(priv, &flags);
+ return ret;
+}
+
+static int orinoco_ioctl_set_genie(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ u8 *buf;
+ unsigned long flags;
+ int err = 0;
+
+ /* cut off at IEEE80211_MAX_DATA_LEN */
+ if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) ||
+ (wrqu->data.length && (extra == NULL)))
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (wrqu->data.length) {
+ buf = kmalloc(wrqu->data.length, GFP_KERNEL);
+ if (buf == NULL) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(buf, extra, wrqu->data.length);
+ kfree(priv->wpa_ie);
+ priv->wpa_ie = buf;
+ priv->wpa_ie_len = wrqu->data.length;
+ } else {
+ kfree(priv->wpa_ie);
+ priv->wpa_ie = NULL;
+ priv->wpa_ie_len = 0;
+ }
+
+ if (priv->wpa_ie) {
+ /* Looks like wl_lkm wants to check the auth alg, and
+ * somehow pass it to the firmware.
+ * Instead it just calls the key mgmt rid
+ * - we do this in set auth.
+ */
+ }
+
+out:
+ orinoco_unlock(priv, &flags);
+ return err;
+}
+
+static int orinoco_ioctl_get_genie(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+ int err = 0;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if ((priv->wpa_ie_len == 0) || (priv->wpa_ie == NULL)) {
+ wrqu->data.length = 0;
+ goto out;
+ }
+
+ if (wrqu->data.length < priv->wpa_ie_len) {
+ err = -E2BIG;
+ goto out;
+ }
+
+ wrqu->data.length = priv->wpa_ie_len;
+ memcpy(extra, priv->wpa_ie, priv->wpa_ie_len);
+
+out:
+ orinoco_unlock(priv, &flags);
+ return err;
+}
+
+static int orinoco_ioctl_set_mlme(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ struct iw_mlme *mlme = (struct iw_mlme *)extra;
+ unsigned long flags;
+ int ret = 0;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ switch (mlme->cmd) {
+ case IW_MLME_DEAUTH:
+ /* silently ignore */
+ break;
+
+ case IW_MLME_DISASSOC:
+ {
+ struct {
+ u8 addr[ETH_ALEN];
+ __le16 reason_code;
+ } __attribute__ ((packed)) buf;
+
+ memcpy(buf.addr, mlme->addr.sa_data, ETH_ALEN);
+ buf.reason_code = cpu_to_le16(mlme->reason_code);
+ ret = HERMES_WRITE_RECORD(hw, USER_BAP,
+ HERMES_RID_CNFDISASSOCIATE,
+ &buf);
+ break;
+ }
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ orinoco_unlock(priv, &flags);
+ return ret;
+}
+
+static int orinoco_ioctl_getretry(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u16 short_limit, long_limit, lifetime;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT,
+ &short_limit);
+ if (err)
+ goto out;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT,
+ &long_limit);
+ if (err)
+ goto out;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME,
+ &lifetime);
+ if (err)
+ goto out;
+
+ rrq->disabled = 0; /* Can't be disabled */
+
+ /* Note : by default, display the retry number */
+ if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
+ rrq->flags = IW_RETRY_LIFETIME;
+ rrq->value = lifetime * 1000; /* ??? */
+ } else {
+ /* By default, display the min number */
+ if ((rrq->flags & IW_RETRY_LONG)) {
+ rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
+ rrq->value = long_limit;
+ } else {
+ rrq->flags = IW_RETRY_LIMIT;
+ rrq->value = short_limit;
+ if(short_limit != long_limit)
+ rrq->flags |= IW_RETRY_SHORT;
+ }
+ }
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_reset(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ if (! capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) {
+ printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name);
+
+ /* Firmware reset */
+ orinoco_reset(&priv->reset_work);
+ } else {
+ printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name);
+
+ schedule_work(&priv->reset_work);
+ }
+
+ return 0;
+}
+
+static int orinoco_ioctl_setibssport(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
+
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int val = *( (int *) extra );
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ priv->ibss_port = val ;
+
+ /* Actually update the mode we are using */
+ set_port_type(priv);
+
+ orinoco_unlock(priv, &flags);
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+static int orinoco_ioctl_getibssport(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int *val = (int *) extra;
+
+ *val = priv->ibss_port;
+ return 0;
+}
+
+static int orinoco_ioctl_setport3(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int val = *( (int *) extra );
+ int err = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ switch (val) {
+ case 0: /* Try to do IEEE ad-hoc mode */
+ if (! priv->has_ibss) {
+ err = -EINVAL;
+ break;
+ }
+ priv->prefer_port3 = 0;
+
+ break;
+
+ case 1: /* Try to do Lucent proprietary ad-hoc mode */
+ if (! priv->has_port3) {
+ err = -EINVAL;
+ break;
+ }
+ priv->prefer_port3 = 1;
+ break;
+
+ default:
+ err = -EINVAL;
+ }
+
+ if (! err) {
+ /* Actually update the mode we are using */
+ set_port_type(priv);
+ err = -EINPROGRESS;
+ }
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getport3(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int *val = (int *) extra;
+
+ *val = priv->prefer_port3;
+ return 0;
+}
+
+static int orinoco_ioctl_setpreamble(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+ int val;
+
+ if (! priv->has_preamble)
+ return -EOPNOTSUPP;
+
+ /* 802.11b has recently defined some short preamble.
+ * Basically, the Phy header has been reduced in size.
+ * This increase performance, especially at high rates
+ * (the preamble is transmitted at 1Mb/s), unfortunately
+ * this give compatibility troubles... - Jean II */
+ val = *( (int *) extra );
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (val)
+ priv->preamble = 1;
+ else
+ priv->preamble = 0;
+
+ orinoco_unlock(priv, &flags);
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+static int orinoco_ioctl_getpreamble(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int *val = (int *) extra;
+
+ if (! priv->has_preamble)
+ return -EOPNOTSUPP;
+
+ *val = priv->preamble;
+ return 0;
+}
+
+/* ioctl interface to hermes_read_ltv()
+ * To use with iwpriv, pass the RID as the token argument, e.g.
+ * iwpriv get_rid [0xfc00]
+ * At least Wireless Tools 25 is required to use iwpriv.
+ * For Wireless Tools 25 and 26 append "dummy" are the end. */
+static int orinoco_ioctl_getrid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int rid = data->flags;
+ u16 length;
+ int err;
+ unsigned long flags;
+
+ /* It's a "get" function, but we don't want users to access the
+ * WEP key and other raw firmware data */
+ if (! capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (rid < 0xfc00 || rid > 0xffff)
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length,
+ extra);
+ if (err)
+ goto out;
+
+ data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length),
+ MAX_RID_LEN);
+
+ out:
+ orinoco_unlock(priv, &flags);
+ return err;
+}
+
+/* Trigger a scan (look for other cells in the vicinity) */
+static int orinoco_ioctl_setscan(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *srq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ struct iw_scan_req *si = (struct iw_scan_req *) extra;
+ int err = 0;
+ unsigned long flags;
+
+ /* Note : you may have realised that, as this is a SET operation,
+ * this is privileged and therefore a normal user can't
+ * perform scanning.
+ * This is not an error, while the device perform scanning,
+ * traffic doesn't flow, so it's a perfect DoS...
+ * Jean II */
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ /* Scanning with port 0 disabled would fail */
+ if (!netif_running(dev)) {
+ err = -ENETDOWN;
+ goto out;
+ }
+
+ /* In monitor mode, the scan results are always empty.
+ * Probe responses are passed to the driver as received
+ * frames and could be processed in software. */
+ if (priv->iw_mode == IW_MODE_MONITOR) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ /* Note : because we don't lock out the irq handler, the way
+ * we access scan variables in priv is critical.
+ * o scan_inprogress : not touched by irq handler
+ * o scan_mode : not touched by irq handler
+ * Before modifying anything on those variables, please think hard !
+ * Jean II */
+
+ /* Save flags */
+ priv->scan_mode = srq->flags;
+
+ /* Always trigger scanning, even if it's in progress.
+ * This way, if the info frame get lost, we will recover somewhat
+ * gracefully - Jean II */
+
+ if (priv->has_hostscan) {
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_SYMBOL:
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFHOSTSCAN_SYMBOL,
+ HERMES_HOSTSCAN_SYMBOL_ONCE |
+ HERMES_HOSTSCAN_SYMBOL_BCAST);
+ break;
+ case FIRMWARE_TYPE_INTERSIL: {
+ __le16 req[3];
+
+ req[0] = cpu_to_le16(0x3fff); /* All channels */
+ req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */
+ req[2] = 0; /* Any ESSID */
+ err = HERMES_WRITE_RECORD(hw, USER_BAP,
+ HERMES_RID_CNFHOSTSCAN, &req);
+ }
+ break;
+ case FIRMWARE_TYPE_AGERE:
+ if (priv->scan_mode & IW_SCAN_THIS_ESSID) {
+ struct hermes_idstring idbuf;
+ size_t len = min(sizeof(idbuf.val),
+ (size_t) si->essid_len);
+ idbuf.len = cpu_to_le16(len);
+ memcpy(idbuf.val, si->essid, len);
+
+ err = hermes_write_ltv(hw, USER_BAP,
+ HERMES_RID_CNFSCANSSID_AGERE,
+ HERMES_BYTES_TO_RECLEN(len + 2),
+ &idbuf);
+ } else
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSCANSSID_AGERE,
+ 0); /* Any ESSID */
+ if (err)
+ break;
+
+ if (priv->has_ext_scan) {
+ /* Clear scan results at the start of
+ * an extended scan */
+ orinoco_clear_scan_results(priv,
+ msecs_to_jiffies(15000));
+
+ /* TODO: Is this available on older firmware?
+ * Can we use it to scan specific channels
+ * for IW_SCAN_THIS_FREQ? */
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSCANCHANNELS2GHZ,
+ 0x7FFF);
+ if (err)
+ goto out;
+
+ err = hermes_inquire(hw,
+ HERMES_INQ_CHANNELINFO);
+ } else
+ err = hermes_inquire(hw, HERMES_INQ_SCAN);
+ break;
+ }
+ } else
+ err = hermes_inquire(hw, HERMES_INQ_SCAN);
+
+ /* One more client */
+ if (! err)
+ priv->scan_inprogress = 1;
+
+ out:
+ orinoco_unlock(priv, &flags);
+ return err;
+}
+
+#define MAX_CUSTOM_LEN 64
+
+/* Translate scan data returned from the card to a card independant
+ * format that the Wireless Tools will understand - Jean II */
+static inline char *orinoco_translate_scan(struct net_device *dev,
+ struct iw_request_info *info,
+ char *current_ev,
+ char *end_buf,
+ union hermes_scan_info *bss,
+ unsigned int last_scanned)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ u16 capabilities;
+ u16 channel;
+ struct iw_event iwe; /* Temporary buffer */
+ char custom[MAX_CUSTOM_LEN];
+
+ memset(&iwe, 0, sizeof(iwe));
+
+ /* First entry *MUST* be the AP MAC address */
+ iwe.cmd = SIOCGIWAP;
+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(iwe.u.ap_addr.sa_data, bss->a.bssid, ETH_ALEN);
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_ADDR_LEN);
+
+ /* Other entries will be displayed in the order we give them */
+
+ /* Add the ESSID */
+ iwe.u.data.length = le16_to_cpu(bss->a.essid_len);
+ if (iwe.u.data.length > 32)
+ iwe.u.data.length = 32;
+ iwe.cmd = SIOCGIWESSID;
+ iwe.u.data.flags = 1;
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, bss->a.essid);
+
+ /* Add mode */
+ iwe.cmd = SIOCGIWMODE;
+ capabilities = le16_to_cpu(bss->a.capabilities);
+ if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
+ if (capabilities & WLAN_CAPABILITY_ESS)
+ iwe.u.mode = IW_MODE_MASTER;
+ else
+ iwe.u.mode = IW_MODE_ADHOC;
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_UINT_LEN);
+ }
+
+ channel = bss->s.channel;
+ if ((channel >= 1) && (channel <= NUM_CHANNELS)) {
+ /* Add channel and frequency */
+ iwe.cmd = SIOCGIWFREQ;
+ iwe.u.freq.m = channel;
+ iwe.u.freq.e = 0;
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_FREQ_LEN);
+
+ iwe.u.freq.m = channel_frequency[channel-1] * 100000;
+ iwe.u.freq.e = 1;
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_FREQ_LEN);
+ }
+
+ /* Add quality statistics. level and noise in dB. No link quality */
+ iwe.cmd = IWEVQUAL;
+ iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID;
+ iwe.u.qual.level = (__u8) le16_to_cpu(bss->a.level) - 0x95;
+ iwe.u.qual.noise = (__u8) le16_to_cpu(bss->a.noise) - 0x95;
+ /* Wireless tools prior to 27.pre22 will show link quality
+ * anyway, so we provide a reasonable value. */
+ if (iwe.u.qual.level > iwe.u.qual.noise)
+ iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise;
+ else
+ iwe.u.qual.qual = 0;
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_QUAL_LEN);
+
+ /* Add encryption capability */
+ iwe.cmd = SIOCGIWENCODE;
+ if (capabilities & WLAN_CAPABILITY_PRIVACY)
+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+ else
+ iwe.u.data.flags = IW_ENCODE_DISABLED;
+ iwe.u.data.length = 0;
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, NULL);
+
+ /* Bit rate is not available in Lucent/Agere firmwares */
+ if (priv->firmware_type != FIRMWARE_TYPE_AGERE) {
+ char *current_val = current_ev + iwe_stream_lcp_len(info);
+ int i;
+ int step;
+
+ if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)
+ step = 2;
+ else
+ step = 1;
+
+ iwe.cmd = SIOCGIWRATE;
+ /* Those two flags are ignored... */
+ iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
+ /* Max 10 values */
+ for (i = 0; i < 10; i += step) {
+ /* NULL terminated */
+ if (bss->p.rates[i] == 0x0)
+ break;
+ /* Bit rate given in 500 kb/s units (+ 0x80) */
+ iwe.u.bitrate.value =
+ ((bss->p.rates[i] & 0x7f) * 500000);
+ current_val = iwe_stream_add_value(info, current_ev,
+ current_val,
+ end_buf, &iwe,
+ IW_EV_PARAM_LEN);
+ }
+ /* Check if we added any event */
+ if ((current_val - current_ev) > iwe_stream_lcp_len(info))
+ current_ev = current_val;
+ }
+
+ /* Beacon interval */
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+ "bcn_int=%d",
+ le16_to_cpu(bss->a.beacon_interv));
+ if (iwe.u.data.length)
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, custom);
+
+ /* Capabilites */
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+ "capab=0x%04x",
+ capabilities);
+ if (iwe.u.data.length)
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, custom);
+
+ /* Add EXTRA: Age to display seconds since last beacon/probe response
+ * for given network. */
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+ " Last beacon: %dms ago",
+ jiffies_to_msecs(jiffies - last_scanned));
+ if (iwe.u.data.length)
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, custom);
+
+ return current_ev;
+}
+
+static inline char *orinoco_translate_ext_scan(struct net_device *dev,
+ struct iw_request_info *info,
+ char *current_ev,
+ char *end_buf,
+ struct agere_ext_scan_info *bss,
+ unsigned int last_scanned)
+{
+ u16 capabilities;
+ u16 channel;
+ struct iw_event iwe; /* Temporary buffer */
+ char custom[MAX_CUSTOM_LEN];
+ u8 *ie;
+
+ memset(&iwe, 0, sizeof(iwe));
+
+ /* First entry *MUST* be the AP MAC address */
+ iwe.cmd = SIOCGIWAP;
+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN);
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_ADDR_LEN);
+
+ /* Other entries will be displayed in the order we give them */
+
+ /* Add the ESSID */
+ ie = bss->data;
+ iwe.u.data.length = ie[1];
+ if (iwe.u.data.length) {
+ if (iwe.u.data.length > 32)
+ iwe.u.data.length = 32;
+ iwe.cmd = SIOCGIWESSID;
+ iwe.u.data.flags = 1;
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, &ie[2]);
+ }
+
+ /* Add mode */
+ capabilities = le16_to_cpu(bss->capabilities);
+ if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
+ iwe.cmd = SIOCGIWMODE;
+ if (capabilities & WLAN_CAPABILITY_ESS)
+ iwe.u.mode = IW_MODE_MASTER;
+ else
+ iwe.u.mode = IW_MODE_ADHOC;
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_UINT_LEN);
+ }
+
+ ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_DS_PARAMS);
+ channel = ie ? ie[2] : 0;
+ if ((channel >= 1) && (channel <= NUM_CHANNELS)) {
+ /* Add channel and frequency */
+ iwe.cmd = SIOCGIWFREQ;
+ iwe.u.freq.m = channel;
+ iwe.u.freq.e = 0;
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_FREQ_LEN);
+
+ iwe.u.freq.m = channel_frequency[channel-1] * 100000;
+ iwe.u.freq.e = 1;
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_FREQ_LEN);
+ }
+
+ /* Add quality statistics. level and noise in dB. No link quality */
+ iwe.cmd = IWEVQUAL;
+ iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID;
+ iwe.u.qual.level = bss->level - 0x95;
+ iwe.u.qual.noise = bss->noise - 0x95;
+ /* Wireless tools prior to 27.pre22 will show link quality
+ * anyway, so we provide a reasonable value. */
+ if (iwe.u.qual.level > iwe.u.qual.noise)
+ iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise;
+ else
+ iwe.u.qual.qual = 0;
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_QUAL_LEN);
+
+ /* Add encryption capability */
+ iwe.cmd = SIOCGIWENCODE;
+ if (capabilities & WLAN_CAPABILITY_PRIVACY)
+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+ else
+ iwe.u.data.flags = IW_ENCODE_DISABLED;
+ iwe.u.data.length = 0;
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, NULL);
+
+ /* WPA IE */
+ ie = orinoco_get_wpa_ie(bss->data, sizeof(bss->data));
+ if (ie) {
+ iwe.cmd = IWEVGENIE;
+ iwe.u.data.length = ie[1] + 2;
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, ie);
+ }
+
+ /* RSN IE */
+ ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_RSN);
+ if (ie) {
+ iwe.cmd = IWEVGENIE;
+ iwe.u.data.length = ie[1] + 2;
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, ie);
+ }
+
+ ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_SUPP_RATES);
+ if (ie) {
+ char *p = current_ev + iwe_stream_lcp_len(info);
+ int i;
+
+ iwe.cmd = SIOCGIWRATE;
+ /* Those two flags are ignored... */
+ iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
+
+ for (i = 2; i < (ie[1] + 2); i++) {
+ iwe.u.bitrate.value = ((ie[i] & 0x7F) * 500000);
+ p = iwe_stream_add_value(info, current_ev, p, end_buf,
+ &iwe, IW_EV_PARAM_LEN);
+ }
+ /* Check if we added any event */
+ if (p > (current_ev + iwe_stream_lcp_len(info)))
+ current_ev = p;
+ }
+
+ /* Timestamp */
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length =
+ snprintf(custom, MAX_CUSTOM_LEN, "tsf=%016llx",
+ (unsigned long long) le64_to_cpu(bss->timestamp));
+ if (iwe.u.data.length)
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, custom);
+
+ /* Beacon interval */
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+ "bcn_int=%d",
+ le16_to_cpu(bss->beacon_interval));
+ if (iwe.u.data.length)
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, custom);
+
+ /* Capabilites */
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+ "capab=0x%04x",
+ capabilities);
+ if (iwe.u.data.length)
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, custom);
+
+ /* Add EXTRA: Age to display seconds since last beacon/probe response
+ * for given network. */
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+ " Last beacon: %dms ago",
+ jiffies_to_msecs(jiffies - last_scanned));
+ if (iwe.u.data.length)
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, custom);
+
+ return current_ev;
+}
+
+/* Return results of a scan */
+static int orinoco_ioctl_getscan(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *srq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+ unsigned long flags;
+ char *current_ev = extra;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (priv->scan_inprogress) {
+ /* Important note : we don't want to block the caller
+ * until results are ready for various reasons.
+ * First, managing wait queues is complex and racy.
+ * Second, we grab some rtnetlink lock before comming
+ * here (in dev_ioctl()).
+ * Third, we generate an Wireless Event, so the
+ * caller can wait itself on that - Jean II */
+ err = -EAGAIN;
+ goto out;
+ }
+
+ if (priv->has_ext_scan) {
+ struct xbss_element *bss;
+
+ list_for_each_entry(bss, &priv->bss_list, list) {
+ /* Translate this entry to WE format */
+ current_ev =
+ orinoco_translate_ext_scan(dev, info,
+ current_ev,
+ extra + srq->length,
+ &bss->bss,
+ bss->last_scanned);
+
+ /* Check if there is space for one more entry */
+ if ((extra + srq->length - current_ev)
+ <= IW_EV_ADDR_LEN) {
+ /* Ask user space to try again with a
+ * bigger buffer */
+ err = -E2BIG;
+ goto out;
+ }
+ }
+
+ } else {
+ struct bss_element *bss;
+
+ list_for_each_entry(bss, &priv->bss_list, list) {
+ /* Translate this entry to WE format */
+ current_ev = orinoco_translate_scan(dev, info,
+ current_ev,
+ extra + srq->length,
+ &bss->bss,
+ bss->last_scanned);
+
+ /* Check if there is space for one more entry */
+ if ((extra + srq->length - current_ev)
+ <= IW_EV_ADDR_LEN) {
+ /* Ask user space to try again with a
+ * bigger buffer */
+ err = -E2BIG;
+ goto out;
+ }
+ }
+ }
+
+ srq->length = (current_ev - extra);
+ srq->flags = (__u16) priv->scan_mode;
+
+out:
+ orinoco_unlock(priv, &flags);
+ return err;
+}
+
+/* Commit handler, called after set operations */
+static int orinoco_ioctl_commit(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ unsigned long flags;
+ int err = 0;
+
+ if (!priv->open)
+ return 0;
+
+ if (priv->broken_disableport) {
+ orinoco_reset(&priv->reset_work);
+ return 0;
+ }
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return err;
+
+ err = hermes_disable_port(hw, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to disable port "
+ "while reconfiguring card\n", dev->name);
+ priv->broken_disableport = 1;
+ goto out;
+ }
+
+ err = __orinoco_program_rids(dev);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to reconfigure card\n",
+ dev->name);
+ goto out;
+ }
+
+ err = hermes_enable_port(hw, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
+ dev->name);
+ goto out;
+ }
+
+ out:
+ if (err) {
+ printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
+ schedule_work(&priv->reset_work);
+ err = 0;
+ }
+
+ orinoco_unlock(priv, &flags);
+ return err;
+}
+
+static const struct iw_priv_args orinoco_privtab[] = {
+ { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" },
+ { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" },
+ { SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ 0, "set_port3" },
+ { SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_port3" },
+ { SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ 0, "set_preamble" },
+ { SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_preamble" },
+ { SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ 0, "set_ibssport" },
+ { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_ibssport" },
+ { SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN,
+ "get_rid" },
+};
+
+
+/*
+ * Structures to export the Wireless Handlers
+ */
+
+#define STD_IW_HANDLER(id, func) \
+ [IW_IOCTL_IDX(id)] = (iw_handler) func
+static const iw_handler orinoco_handler[] = {
+ STD_IW_HANDLER(SIOCSIWCOMMIT, orinoco_ioctl_commit),
+ STD_IW_HANDLER(SIOCGIWNAME, orinoco_ioctl_getname),
+ STD_IW_HANDLER(SIOCSIWFREQ, orinoco_ioctl_setfreq),
+ STD_IW_HANDLER(SIOCGIWFREQ, orinoco_ioctl_getfreq),
+ STD_IW_HANDLER(SIOCSIWMODE, orinoco_ioctl_setmode),
+ STD_IW_HANDLER(SIOCGIWMODE, orinoco_ioctl_getmode),
+ STD_IW_HANDLER(SIOCSIWSENS, orinoco_ioctl_setsens),
+ STD_IW_HANDLER(SIOCGIWSENS, orinoco_ioctl_getsens),
+ STD_IW_HANDLER(SIOCGIWRANGE, orinoco_ioctl_getiwrange),
+ STD_IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy),
+ STD_IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy),
+ STD_IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy),
+ STD_IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy),
+ STD_IW_HANDLER(SIOCSIWAP, orinoco_ioctl_setwap),
+ STD_IW_HANDLER(SIOCGIWAP, orinoco_ioctl_getwap),
+ STD_IW_HANDLER(SIOCSIWSCAN, orinoco_ioctl_setscan),
+ STD_IW_HANDLER(SIOCGIWSCAN, orinoco_ioctl_getscan),
+ STD_IW_HANDLER(SIOCSIWESSID, orinoco_ioctl_setessid),
+ STD_IW_HANDLER(SIOCGIWESSID, orinoco_ioctl_getessid),
+ STD_IW_HANDLER(SIOCSIWNICKN, orinoco_ioctl_setnick),
+ STD_IW_HANDLER(SIOCGIWNICKN, orinoco_ioctl_getnick),
+ STD_IW_HANDLER(SIOCSIWRATE, orinoco_ioctl_setrate),
+ STD_IW_HANDLER(SIOCGIWRATE, orinoco_ioctl_getrate),
+ STD_IW_HANDLER(SIOCSIWRTS, orinoco_ioctl_setrts),
+ STD_IW_HANDLER(SIOCGIWRTS, orinoco_ioctl_getrts),
+ STD_IW_HANDLER(SIOCSIWFRAG, orinoco_ioctl_setfrag),
+ STD_IW_HANDLER(SIOCGIWFRAG, orinoco_ioctl_getfrag),
+ STD_IW_HANDLER(SIOCGIWRETRY, orinoco_ioctl_getretry),
+ STD_IW_HANDLER(SIOCSIWENCODE, orinoco_ioctl_setiwencode),
+ STD_IW_HANDLER(SIOCGIWENCODE, orinoco_ioctl_getiwencode),
+ STD_IW_HANDLER(SIOCSIWPOWER, orinoco_ioctl_setpower),
+ STD_IW_HANDLER(SIOCGIWPOWER, orinoco_ioctl_getpower),
+ STD_IW_HANDLER(SIOCSIWGENIE, orinoco_ioctl_set_genie),
+ STD_IW_HANDLER(SIOCGIWGENIE, orinoco_ioctl_get_genie),
+ STD_IW_HANDLER(SIOCSIWMLME, orinoco_ioctl_set_mlme),
+ STD_IW_HANDLER(SIOCSIWAUTH, orinoco_ioctl_set_auth),
+ STD_IW_HANDLER(SIOCGIWAUTH, orinoco_ioctl_get_auth),
+ STD_IW_HANDLER(SIOCSIWENCODEEXT, orinoco_ioctl_set_encodeext),
+ STD_IW_HANDLER(SIOCGIWENCODEEXT, orinoco_ioctl_get_encodeext),
+};
+
+
+/*
+ Added typecasting since we no longer use iwreq_data -- Moustafa
+ */
+static const iw_handler orinoco_private_handler[] = {
+ [0] = (iw_handler) orinoco_ioctl_reset,
+ [1] = (iw_handler) orinoco_ioctl_reset,
+ [2] = (iw_handler) orinoco_ioctl_setport3,
+ [3] = (iw_handler) orinoco_ioctl_getport3,
+ [4] = (iw_handler) orinoco_ioctl_setpreamble,
+ [5] = (iw_handler) orinoco_ioctl_getpreamble,
+ [6] = (iw_handler) orinoco_ioctl_setibssport,
+ [7] = (iw_handler) orinoco_ioctl_getibssport,
+ [9] = (iw_handler) orinoco_ioctl_getrid,
+};
+
+static const struct iw_handler_def orinoco_handler_def = {
+ .num_standard = ARRAY_SIZE(orinoco_handler),
+ .num_private = ARRAY_SIZE(orinoco_private_handler),
+ .num_private_args = ARRAY_SIZE(orinoco_privtab),
+ .standard = orinoco_handler,
+ .private = orinoco_private_handler,
+ .private_args = orinoco_privtab,
+ .get_wireless_stats = orinoco_get_wireless_stats,
+};
+
+static void orinoco_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1);
+ strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1);
+ strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1);
+ if (dev->dev.parent)
+ strncpy(info->bus_info, dev->dev.parent->bus_id,
+ sizeof(info->bus_info) - 1);
+ else
+ snprintf(info->bus_info, sizeof(info->bus_info) - 1,
+ "PCMCIA %p", priv->hw.iobase);
+}
+
+static const struct ethtool_ops orinoco_ethtool_ops = {
+ .get_drvinfo = orinoco_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+};
+
+/********************************************************************/
+/* Module initialization */
+/********************************************************************/
+
+EXPORT_SYMBOL(alloc_orinocodev);
+EXPORT_SYMBOL(free_orinocodev);
+
+EXPORT_SYMBOL(__orinoco_up);
+EXPORT_SYMBOL(__orinoco_down);
+EXPORT_SYMBOL(orinoco_reinit_firmware);
+
+EXPORT_SYMBOL(orinoco_interrupt);
+
+/* Can't be declared "const" or the whole __initdata section will
+ * become const */
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (David Gibson <hermes@gibson.dropbear.id.au>, "
+ "Pavel Roskin <proski@gnu.org>, et al)";
+
+static int __init init_orinoco(void)
+{
+ printk(KERN_DEBUG "%s\n", version);
+ return 0;
+}
+
+static void __exit exit_orinoco(void)
+{
+}
+
+module_init(init_orinoco);
+module_exit(exit_orinoco);
--- /dev/null
+/* orinoco.h
+ *
+ * Common definitions to all pieces of the various orinoco
+ * drivers
+ */
+
+#ifndef _ORINOCO_H
+#define _ORINOCO_H
+
+#define DRIVER_VERSION "0.15"
+
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+
+#include "hermes.h"
+
+/* To enable debug messages */
+//#define ORINOCO_DEBUG 3
+
+#define WIRELESS_SPY // enable iwspy support
+
+#define MAX_SCAN_LEN 4096
+
+#define ORINOCO_MAX_KEY_SIZE 14
+#define ORINOCO_MAX_KEYS 4
+
+struct orinoco_key {
+ __le16 len; /* always stored as little-endian */
+ char data[ORINOCO_MAX_KEY_SIZE];
+} __attribute__ ((packed));
+
+#define TKIP_KEYLEN 16
+#define MIC_KEYLEN 8
+
+struct orinoco_tkip_key {
+ u8 tkip[TKIP_KEYLEN];
+ u8 tx_mic[MIC_KEYLEN];
+ u8 rx_mic[MIC_KEYLEN];
+};
+
+typedef enum {
+ FIRMWARE_TYPE_AGERE,
+ FIRMWARE_TYPE_INTERSIL,
+ FIRMWARE_TYPE_SYMBOL
+} fwtype_t;
+
+struct bss_element {
+ union hermes_scan_info bss;
+ unsigned long last_scanned;
+ struct list_head list;
+};
+
+struct xbss_element {
+ struct agere_ext_scan_info bss;
+ unsigned long last_scanned;
+ struct list_head list;
+};
+
+struct hermes_rx_descriptor;
+
+struct orinoco_rx_data {
+ struct hermes_rx_descriptor *desc;
+ struct sk_buff *skb;
+ struct list_head list;
+};
+
+struct firmware;
+
+struct orinoco_private {
+ void *card; /* Pointer to card dependent structure */
+ struct device *dev;
+ int (*hard_reset)(struct orinoco_private *);
+ int (*stop_fw)(struct orinoco_private *, int);
+
+ /* Synchronisation stuff */
+ spinlock_t lock;
+ int hw_unavailable;
+ struct work_struct reset_work;
+
+ /* Interrupt tasklets */
+ struct tasklet_struct rx_tasklet;
+ struct list_head rx_list;
+ struct orinoco_rx_data *rx_data;
+
+ /* driver state */
+ int open;
+ u16 last_linkstatus;
+ struct work_struct join_work;
+ struct work_struct wevent_work;
+
+ /* Net device stuff */
+ struct net_device *ndev;
+ struct net_device_stats stats;
+ struct iw_statistics wstats;
+
+ /* Hardware control variables */
+ hermes_t hw;
+ u16 txfid;
+
+ /* Capabilities of the hardware/firmware */
+ fwtype_t firmware_type;
+ char fw_name[32];
+ int ibss_port;
+ int nicbuf_size;
+ u16 channel_mask;
+
+ /* Boolean capabilities */
+ unsigned int has_ibss:1;
+ unsigned int has_port3:1;
+ unsigned int has_wep:1;
+ unsigned int has_big_wep:1;
+ unsigned int has_mwo:1;
+ unsigned int has_pm:1;
+ unsigned int has_preamble:1;
+ unsigned int has_sensitivity:1;
+ unsigned int has_hostscan:1;
+ unsigned int has_alt_txcntl:1;
+ unsigned int has_ext_scan:1;
+ unsigned int has_wpa:1;
+ unsigned int do_fw_download:1;
+ unsigned int broken_disableport:1;
+ unsigned int broken_monitor:1;
+
+ /* Configuration paramaters */
+ u32 iw_mode;
+ int prefer_port3;
+ u16 encode_alg, wep_restrict, tx_key;
+ struct orinoco_key keys[ORINOCO_MAX_KEYS];
+ int bitratemode;
+ char nick[IW_ESSID_MAX_SIZE+1];
+ char desired_essid[IW_ESSID_MAX_SIZE+1];
+ char desired_bssid[ETH_ALEN];
+ int bssid_fixed;
+ u16 frag_thresh, mwo_robust;
+ u16 channel;
+ u16 ap_density, rts_thresh;
+ u16 pm_on, pm_mcast, pm_period, pm_timeout;
+ u16 preamble;
+#ifdef WIRELESS_SPY
+ struct iw_spy_data spy_data; /* iwspy support */
+ struct iw_public_data wireless_data;
+#endif
+
+ /* Configuration dependent variables */
+ int port_type, createibss;
+ int promiscuous, mc_count;
+
+ /* Scanning support */
+ struct list_head bss_list;
+ struct list_head bss_free_list;
+ void *bss_xbss_data;
+
+ int scan_inprogress; /* Scan pending... */
+ u32 scan_mode; /* Type of scan done */
+
+ /* WPA support */
+ u8 *wpa_ie;
+ int wpa_ie_len;
+
+ struct orinoco_tkip_key tkip_key[ORINOCO_MAX_KEYS];
+ struct crypto_hash *rx_tfm_mic;
+ struct crypto_hash *tx_tfm_mic;
+
+ unsigned int wpa_enabled:1;
+ unsigned int tkip_cm_active:1;
+ unsigned int key_mgmt:3;
+
+ /* Cached in memory firmware to use in ->resume */
+ const struct firmware *cached_fw;
+};
+
+#ifdef ORINOCO_DEBUG
+extern int orinoco_debug;
+#define DEBUG(n, args...) do { if (orinoco_debug>(n)) printk(KERN_DEBUG args); } while(0)
+#else
+#define DEBUG(n, args...) do { } while (0)
+#endif /* ORINOCO_DEBUG */
+
+/********************************************************************/
+/* Exported prototypes */
+/********************************************************************/
+
+extern struct net_device *alloc_orinocodev(
+ int sizeof_card, struct device *device,
+ int (*hard_reset)(struct orinoco_private *),
+ int (*stop_fw)(struct orinoco_private *, int));
+extern void free_orinocodev(struct net_device *dev);
+extern int __orinoco_up(struct net_device *dev);
+extern int __orinoco_down(struct net_device *dev);
+extern int orinoco_reinit_firmware(struct net_device *dev);
+extern irqreturn_t orinoco_interrupt(int irq, void * dev_id);
+
+/********************************************************************/
+/* Locking and synchronization functions */
+/********************************************************************/
+
+static inline int orinoco_lock(struct orinoco_private *priv,
+ unsigned long *flags)
+{
+ spin_lock_irqsave(&priv->lock, *flags);
+ if (priv->hw_unavailable) {
+ DEBUG(1, "orinoco_lock() called with hw_unavailable (dev=%p)\n",
+ priv->ndev);
+ spin_unlock_irqrestore(&priv->lock, *flags);
+ return -EBUSY;
+ }
+ return 0;
+}
+
+static inline void orinoco_unlock(struct orinoco_private *priv,
+ unsigned long *flags)
+{
+ spin_unlock_irqrestore(&priv->lock, *flags);
+}
+
+#endif /* _ORINOCO_H */
--- /dev/null
+/* orinoco_cs.c (formerly known as dldwd_cs.c)
+ *
+ * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
+ * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
+ * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
+ * It should also be usable on various Prism II based cards such as the
+ * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
+ * cards such as the 3Com AirConnect and Ericsson WLAN.
+ *
+ * Copyright notice & release notes in file orinoco.c
+ */
+
+#define DRIVER_NAME "orinoco_cs"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+
+#include "orinoco.h"
+
+/********************************************************************/
+/* Module stuff */
+/********************************************************************/
+
+MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
+MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards");
+MODULE_LICENSE("Dual MPL/GPL");
+
+/* Module parameters */
+
+/* Some D-Link cards have buggy CIS. They do work at 5v properly, but
+ * don't have any CIS entry for it. This workaround it... */
+static int ignore_cis_vcc; /* = 0 */
+module_param(ignore_cis_vcc, int, 0);
+MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
+
+/********************************************************************/
+/* Data structures */
+/********************************************************************/
+
+/* PCMCIA specific device information (goes in the card field of
+ * struct orinoco_private */
+struct orinoco_pccard {
+ struct pcmcia_device *p_dev;
+ dev_node_t node;
+
+ /* Used to handle hard reset */
+ /* yuck, we need this hack to work around the insanity of the
+ * PCMCIA layer */
+ unsigned long hard_reset_in_progress;
+};
+
+
+/********************************************************************/
+/* Function prototypes */
+/********************************************************************/
+
+static int orinoco_cs_config(struct pcmcia_device *link);
+static void orinoco_cs_release(struct pcmcia_device *link);
+static void orinoco_cs_detach(struct pcmcia_device *p_dev);
+
+/********************************************************************/
+/* Device methods */
+/********************************************************************/
+
+static int
+orinoco_cs_hard_reset(struct orinoco_private *priv)
+{
+ struct orinoco_pccard *card = priv->card;
+ struct pcmcia_device *link = card->p_dev;
+ int err;
+
+ /* We need atomic ops here, because we're not holding the lock */
+ set_bit(0, &card->hard_reset_in_progress);
+
+ err = pcmcia_reset_card(link->socket);
+ if (err)
+ return err;
+
+ msleep(100);
+ clear_bit(0, &card->hard_reset_in_progress);
+
+ return 0;
+}
+
+/********************************************************************/
+/* PCMCIA stuff */
+/********************************************************************/
+
+/*
+ * This creates an "instance" of the driver, allocating local data
+ * structures for one device. The device is registered with Card
+ * Services.
+ *
+ * The dev_link structure is initialized, but we don't actually
+ * configure the card at this point -- we wait until we receive a card
+ * insertion event. */
+static int
+orinoco_cs_probe(struct pcmcia_device *link)
+{
+ struct net_device *dev;
+ struct orinoco_private *priv;
+ struct orinoco_pccard *card;
+
+ dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
+ orinoco_cs_hard_reset, NULL);
+ if (! dev)
+ return -ENOMEM;
+ priv = netdev_priv(dev);
+ card = priv->card;
+
+ /* Link both structures together */
+ card->p_dev = link;
+ link->priv = dev;
+
+ /* Interrupt setup */
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
+ link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Handler = orinoco_interrupt;
+ link->irq.Instance = dev;
+
+ /* General socket configuration defaults can go here. In this
+ * client, we assume very little, and rely on the CIS for
+ * almost everything. In most clients, many details (i.e.,
+ * number, sizes, and attributes of IO windows) are fixed by
+ * the nature of the device, and can be hard-wired here. */
+ link->conf.Attributes = 0;
+ link->conf.IntType = INT_MEMORY_AND_IO;
+
+ return orinoco_cs_config(link);
+} /* orinoco_cs_attach */
+
+/*
+ * This deletes a driver "instance". The device is de-registered with
+ * Card Services. If it has been released, all local data structures
+ * are freed. Otherwise, the structures will be freed when the device
+ * is released.
+ */
+static void orinoco_cs_detach(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ if (link->dev_node)
+ unregister_netdev(dev);
+
+ orinoco_cs_release(link);
+
+ free_orinocodev(dev);
+} /* orinoco_cs_detach */
+
+/*
+ * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
+ * event is received, to configure the PCMCIA socket, and to make the
+ * device available to the system.
+ */
+
+#define CS_CHECK(fn, ret) do { \
+ last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
+ } while (0)
+
+static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ goto next_entry;
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ /* Do we need to allocate an interrupt? */
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ goto next_entry;
+ }
+ return 0;
+
+next_entry:
+ pcmcia_disable_device(p_dev);
+ return -ENODEV;
+};
+
+static int
+orinoco_cs_config(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_pccard *card = priv->card;
+ hermes_t *hw = &priv->hw;
+ int last_fn, last_ret;
+ void __iomem *mem;
+
+ /*
+ * In this loop, we scan the CIS for configuration table
+ * entries, each of which describes a valid card
+ * configuration, including voltage, IO window, memory window,
+ * and interrupt settings.
+ *
+ * We make no assumptions about the card to be configured: we
+ * use just the information available in the CIS. In an ideal
+ * world, this would work for any PCMCIA card, but it requires
+ * a complete and accurate CIS. In practice, a driver usually
+ * "knows" most of these things without consulting the CIS,
+ * and most client drivers will only use the CIS to fill in
+ * implementation-defined details.
+ */
+ last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
+ if (last_ret) {
+ if (!ignore_cis_vcc)
+ printk(KERN_ERR PFX "GetNextTuple(): No matching "
+ "CIS configuration. Maybe you need the "
+ "ignore_cis_vcc=1 parameter.\n");
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
+ }
+
+ /*
+ * Allocate an interrupt line. Note that this does not assign
+ * a handler to the interrupt, unless the 'Handler' member of
+ * the irq structure is initialized.
+ */
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+
+ /* We initialize the hermes structure before completing PCMCIA
+ * configuration just in case the interrupt handler gets
+ * called. */
+ mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
+ if (!mem)
+ goto cs_failed;
+
+ hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
+
+ /*
+ * This actually configures the PCMCIA socket -- setting up
+ * the I/O windows and the interrupt mapping, and putting the
+ * card and host interface into "Memory and IO" mode.
+ */
+ CS_CHECK(RequestConfiguration,
+ pcmcia_request_configuration(link, &link->conf));
+
+ /* Ok, we have the configuration, prepare to register the netdev */
+ dev->base_addr = link->io.BasePort1;
+ dev->irq = link->irq.AssignedIRQ;
+ card->node.major = card->node.minor = 0;
+
+ SET_NETDEV_DEV(dev, &handle_to_dev(link));
+ /* Tell the stack we exist */
+ if (register_netdev(dev) != 0) {
+ printk(KERN_ERR PFX "register_netdev() failed\n");
+ goto failed;
+ }
+
+ /* At this point, the dev_node_t structure(s) needs to be
+ * initialized and arranged in a linked list at link->dev_node. */
+ strcpy(card->node.dev_name, dev->name);
+ link->dev_node = &card->node; /* link->dev_node being non-NULL is also
+ used to indicate that the
+ net_device has been registered */
+
+ /* Finally, report what we've done */
+ printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
+ "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
+ link->irq.AssignedIRQ, link->io.BasePort1,
+ link->io.BasePort1 + link->io.NumPorts1 - 1);
+ return 0;
+
+ cs_failed:
+ cs_error(link, last_fn, last_ret);
+
+ failed:
+ orinoco_cs_release(link);
+ return -ENODEV;
+} /* orinoco_cs_config */
+
+/*
+ * After a card is removed, orinoco_cs_release() will unregister the
+ * device, and release the PCMCIA configuration. If the device is
+ * still open, this will be postponed until it is closed.
+ */
+static void
+orinoco_cs_release(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ /* We're committed to taking the device away now, so mark the
+ * hardware as unavailable */
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->hw_unavailable++;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ pcmcia_disable_device(link);
+ if (priv->hw.iobase)
+ ioport_unmap(priv->hw.iobase);
+} /* orinoco_cs_release */
+
+static int orinoco_cs_suspend(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_pccard *card = priv->card;
+ int err = 0;
+ unsigned long flags;
+
+ /* This is probably racy, but I can't think of
+ a better way, short of rewriting the PCMCIA
+ layer to not suck :-( */
+ if (! test_bit(0, &card->hard_reset_in_progress)) {
+ spin_lock_irqsave(&priv->lock, flags);
+
+ err = __orinoco_down(dev);
+ if (err)
+ printk(KERN_WARNING "%s: Error %d downing interface\n",
+ dev->name, err);
+
+ netif_device_detach(dev);
+ priv->hw_unavailable++;
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+
+ return 0;
+}
+
+static int orinoco_cs_resume(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_pccard *card = priv->card;
+ int err = 0;
+ unsigned long flags;
+
+ if (! test_bit(0, &card->hard_reset_in_progress)) {
+ err = orinoco_reinit_firmware(dev);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
+ dev->name, err);
+ return -EIO;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ netif_device_attach(dev);
+ priv->hw_unavailable--;
+
+ if (priv->open && ! priv->hw_unavailable) {
+ err = __orinoco_up(dev);
+ if (err)
+ printk(KERN_ERR "%s: Error %d restarting card\n",
+ dev->name, err);
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+
+ return err;
+}
+
+
+/********************************************************************/
+/* Module initialization */
+/********************************************************************/
+
+/* Can't be declared "const" or the whole __initdata section will
+ * become const */
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (David Gibson <hermes@gibson.dropbear.id.au>, "
+ "Pavel Roskin <proski@gnu.org>, et al)";
+
+static struct pcmcia_device_id orinoco_cs_ids[] = {
+ PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
+ PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
+ PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
+ PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
+ PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
+ PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
+ PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
+ PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
+ PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
+ PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
+ PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
+ PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
+ PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
+ PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
+ PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
+ PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
+ PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
+ PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
+ PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
+ PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
+ PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
+ PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
+ PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
+ PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
+ PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
+ PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
+ PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
+ PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
+ PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
+ PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
+ PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
+ PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
+ PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
+ PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
+ PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
+ PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
+ PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
+ PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
+ PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
+ PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
+ PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
+ PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
+ PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
+ PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
+ PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
+ PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
+ PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
+ PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
+ PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
+ PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
+ PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
+ PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
+ PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
+ PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
+ PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
+ PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
+ PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
+ PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
+ PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
+ PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
+ PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
+ PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
+ PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
+ PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
+ PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
+ PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
+ PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
+ PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
+ PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
+ PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
+ PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39),
+ PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
+ PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
+ PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
+ PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
+ PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
+ PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
+ PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
+ PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
+ PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
+ PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
+ PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
+
+static struct pcmcia_driver orinoco_driver = {
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = DRIVER_NAME,
+ },
+ .probe = orinoco_cs_probe,
+ .remove = orinoco_cs_detach,
+ .id_table = orinoco_cs_ids,
+ .suspend = orinoco_cs_suspend,
+ .resume = orinoco_cs_resume,
+};
+
+static int __init
+init_orinoco_cs(void)
+{
+ printk(KERN_DEBUG "%s\n", version);
+
+ return pcmcia_register_driver(&orinoco_driver);
+}
+
+static void __exit
+exit_orinoco_cs(void)
+{
+ pcmcia_unregister_driver(&orinoco_driver);
+}
+
+module_init(init_orinoco_cs);
+module_exit(exit_orinoco_cs);
--- /dev/null
+/* orinoco_nortel.c
+ *
+ * Driver for Prism II devices which would usually be driven by orinoco_cs,
+ * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in
+ * Nortel emobility, Symbol LA-4113 and Symbol LA-4123.
+ *
+ * Copyright (C) 2002 Tobias Hoffmann
+ * (C) 2003 Christoph Jungegger <disdos@traum404.de>
+ *
+ * Some of this code is borrowed from orinoco_plx.c
+ * Copyright (C) 2001 Daniel Barlow
+ * Some of this code is borrowed from orinoco_pci.c
+ * Copyright (C) 2001 Jean Tourrilhes
+ * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
+ * has been copied from it. linux-wlan-ng-0.1.10 is originally :
+ * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#define DRIVER_NAME "orinoco_nortel"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <pcmcia/cisreg.h>
+
+#include "orinoco.h"
+#include "orinoco_pci.h"
+
+#define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */
+#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
+
+
+/*
+ * Do a soft reset of the card using the Configuration Option Register
+ * We need this to get going...
+ * This is the part of the code that is strongly inspired from wlan-ng
+ *
+ * Note bis : Don't try to access HERMES_CMD during the reset phase.
+ * It just won't work !
+ */
+static int orinoco_nortel_cor_reset(struct orinoco_private *priv)
+{
+ struct orinoco_pci_card *card = priv->card;
+
+ /* Assert the reset until the card notices */
+ iowrite16(8, card->bridge_io + 2);
+ ioread16(card->attr_io + COR_OFFSET);
+ iowrite16(0x80, card->attr_io + COR_OFFSET);
+ mdelay(1);
+
+ /* Give time for the card to recover from this hard effort */
+ iowrite16(0, card->attr_io + COR_OFFSET);
+ iowrite16(0, card->attr_io + COR_OFFSET);
+ mdelay(1);
+
+ /* Set COR as usual */
+ iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
+ iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
+ mdelay(1);
+
+ iowrite16(0x228, card->bridge_io + 2);
+
+ return 0;
+}
+
+static int orinoco_nortel_hw_init(struct orinoco_pci_card *card)
+{
+ int i;
+ u32 reg;
+
+ /* Setup bridge */
+ if (ioread16(card->bridge_io) & 1) {
+ printk(KERN_ERR PFX "brg1 answer1 wrong\n");
+ return -EBUSY;
+ }
+ iowrite16(0x118, card->bridge_io + 2);
+ iowrite16(0x108, card->bridge_io + 2);
+ mdelay(30);
+ iowrite16(0x8, card->bridge_io + 2);
+ for (i = 0; i < 30; i++) {
+ mdelay(30);
+ if (ioread16(card->bridge_io) & 0x10) {
+ break;
+ }
+ }
+ if (i == 30) {
+ printk(KERN_ERR PFX "brg1 timed out\n");
+ return -EBUSY;
+ }
+ if (ioread16(card->attr_io + COR_OFFSET) & 1) {
+ printk(KERN_ERR PFX "brg2 answer1 wrong\n");
+ return -EBUSY;
+ }
+ if (ioread16(card->attr_io + COR_OFFSET + 2) & 1) {
+ printk(KERN_ERR PFX "brg2 answer2 wrong\n");
+ return -EBUSY;
+ }
+ if (ioread16(card->attr_io + COR_OFFSET + 4) & 1) {
+ printk(KERN_ERR PFX "brg2 answer3 wrong\n");
+ return -EBUSY;
+ }
+
+ /* Set the PCMCIA COR register */
+ iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
+ mdelay(1);
+ reg = ioread16(card->attr_io + COR_OFFSET);
+ if (reg != COR_VALUE) {
+ printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n",
+ reg);
+ return -EBUSY;
+ }
+
+ /* Set LEDs */
+ iowrite16(1, card->bridge_io + 10);
+ return 0;
+}
+
+static int orinoco_nortel_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int err;
+ struct orinoco_private *priv;
+ struct orinoco_pci_card *card;
+ struct net_device *dev;
+ void __iomem *hermes_io, *bridge_io, *attr_io;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot enable PCI device\n");
+ return err;
+ }
+
+ err = pci_request_regions(pdev, DRIVER_NAME);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
+ goto fail_resources;
+ }
+
+ bridge_io = pci_iomap(pdev, 0, 0);
+ if (!bridge_io) {
+ printk(KERN_ERR PFX "Cannot map bridge registers\n");
+ err = -EIO;
+ goto fail_map_bridge;
+ }
+
+ attr_io = pci_iomap(pdev, 1, 0);
+ if (!attr_io) {
+ printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n");
+ err = -EIO;
+ goto fail_map_attr;
+ }
+
+ hermes_io = pci_iomap(pdev, 2, 0);
+ if (!hermes_io) {
+ printk(KERN_ERR PFX "Cannot map chipset registers\n");
+ err = -EIO;
+ goto fail_map_hermes;
+ }
+
+ /* Allocate network device */
+ dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
+ orinoco_nortel_cor_reset, NULL);
+ if (!dev) {
+ printk(KERN_ERR PFX "Cannot allocate network device\n");
+ err = -ENOMEM;
+ goto fail_alloc;
+ }
+
+ priv = netdev_priv(dev);
+ card = priv->card;
+ card->bridge_io = bridge_io;
+ card->attr_io = attr_io;
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
+
+ err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
+ dev->name, dev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
+ err = -EBUSY;
+ goto fail_irq;
+ }
+
+ err = orinoco_nortel_hw_init(card);
+ if (err) {
+ printk(KERN_ERR PFX "Hardware initialization failed\n");
+ goto fail;
+ }
+
+ err = orinoco_nortel_cor_reset(priv);
+ if (err) {
+ printk(KERN_ERR PFX "Initial reset failed\n");
+ goto fail;
+ }
+
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot register network device\n");
+ goto fail;
+ }
+
+ pci_set_drvdata(pdev, dev);
+ printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
+ pci_name(pdev));
+
+ return 0;
+
+ fail:
+ free_irq(pdev->irq, dev);
+
+ fail_irq:
+ pci_set_drvdata(pdev, NULL);
+ free_orinocodev(dev);
+
+ fail_alloc:
+ pci_iounmap(pdev, hermes_io);
+
+ fail_map_hermes:
+ pci_iounmap(pdev, attr_io);
+
+ fail_map_attr:
+ pci_iounmap(pdev, bridge_io);
+
+ fail_map_bridge:
+ pci_release_regions(pdev);
+
+ fail_resources:
+ pci_disable_device(pdev);
+
+ return err;
+}
+
+static void __devexit orinoco_nortel_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_pci_card *card = priv->card;
+
+ /* Clear LEDs */
+ iowrite16(0, card->bridge_io + 10);
+
+ unregister_netdev(dev);
+ free_irq(pdev->irq, dev);
+ pci_set_drvdata(pdev, NULL);
+ free_orinocodev(dev);
+ pci_iounmap(pdev, priv->hw.iobase);
+ pci_iounmap(pdev, card->attr_io);
+ pci_iounmap(pdev, card->bridge_io);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+static struct pci_device_id orinoco_nortel_id_table[] = {
+ /* Nortel emobility PCI */
+ {0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,},
+ /* Symbol LA-4123 PCI */
+ {0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,},
+ {0,},
+};
+
+MODULE_DEVICE_TABLE(pci, orinoco_nortel_id_table);
+
+static struct pci_driver orinoco_nortel_driver = {
+ .name = DRIVER_NAME,
+ .id_table = orinoco_nortel_id_table,
+ .probe = orinoco_nortel_init_one,
+ .remove = __devexit_p(orinoco_nortel_remove_one),
+ .suspend = orinoco_pci_suspend,
+ .resume = orinoco_pci_resume,
+};
+
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)";
+MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>");
+MODULE_DESCRIPTION
+ ("Driver for wireless LAN cards using the Nortel PCI bridge");
+MODULE_LICENSE("Dual MPL/GPL");
+
+static int __init orinoco_nortel_init(void)
+{
+ printk(KERN_DEBUG "%s\n", version);
+ return pci_register_driver(&orinoco_nortel_driver);
+}
+
+static void __exit orinoco_nortel_exit(void)
+{
+ pci_unregister_driver(&orinoco_nortel_driver);
+}
+
+module_init(orinoco_nortel_init);
+module_exit(orinoco_nortel_exit);
+
+/*
+ * Local variables:
+ * c-indent-level: 8
+ * c-basic-offset: 8
+ * tab-width: 8
+ * End:
+ */
--- /dev/null
+/* orinoco_pci.c
+ *
+ * Driver for Prism 2.5/3 devices that have a direct PCI interface
+ * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge).
+ * The card contains only one PCI region, which contains all the usual
+ * hermes registers, as well as the COR register.
+ *
+ * Current maintainers are:
+ * Pavel Roskin <proski AT gnu.org>
+ * and David Gibson <hermes AT gibson.dropbear.id.au>
+ *
+ * Some of this code is borrowed from orinoco_plx.c
+ * Copyright (C) 2001 Daniel Barlow <dan AT telent.net>
+ * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
+ * has been copied from it. linux-wlan-ng-0.1.10 is originally :
+ * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
+ * This file originally written by:
+ * Copyright (C) 2001 Jean Tourrilhes <jt AT hpl.hp.com>
+ * And is now maintained by:
+ * (C) Copyright David Gibson, IBM Corp. 2002-2003.
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#define DRIVER_NAME "orinoco_pci"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+
+#include "orinoco.h"
+#include "orinoco_pci.h"
+
+/* Offset of the COR register of the PCI card */
+#define HERMES_PCI_COR (0x26)
+
+/* Bitmask to reset the card */
+#define HERMES_PCI_COR_MASK (0x0080)
+
+/* Magic timeouts for doing the reset.
+ * Those times are straight from wlan-ng, and it is claimed that they
+ * are necessary. Alan will kill me. Take your time and grab a coffee. */
+#define HERMES_PCI_COR_ONT (250) /* ms */
+#define HERMES_PCI_COR_OFFT (500) /* ms */
+#define HERMES_PCI_COR_BUSYT (500) /* ms */
+
+/*
+ * Do a soft reset of the card using the Configuration Option Register
+ * We need this to get going...
+ * This is the part of the code that is strongly inspired from wlan-ng
+ *
+ * Note : This code is done with irq enabled. This mean that many
+ * interrupts will occur while we are there. This is why we use the
+ * jiffies to regulate time instead of a straight mdelay(). Usually we
+ * need only around 245 iteration of the loop to do 250 ms delay.
+ *
+ * Note bis : Don't try to access HERMES_CMD during the reset phase.
+ * It just won't work !
+ */
+static int orinoco_pci_cor_reset(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ unsigned long timeout;
+ u16 reg;
+
+ /* Assert the reset until the card notices */
+ hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK);
+ mdelay(HERMES_PCI_COR_ONT);
+
+ /* Give time for the card to recover from this hard effort */
+ hermes_write_regn(hw, PCI_COR, 0x0000);
+ mdelay(HERMES_PCI_COR_OFFT);
+
+ /* The card is ready when it's no longer busy */
+ timeout = jiffies + (HERMES_PCI_COR_BUSYT * HZ / 1000);
+ reg = hermes_read_regn(hw, CMD);
+ while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
+ mdelay(1);
+ reg = hermes_read_regn(hw, CMD);
+ }
+
+ /* Still busy? */
+ if (reg & HERMES_CMD_BUSY) {
+ printk(KERN_ERR PFX "Busy timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int orinoco_pci_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int err;
+ struct orinoco_private *priv;
+ struct orinoco_pci_card *card;
+ struct net_device *dev;
+ void __iomem *hermes_io;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot enable PCI device\n");
+ return err;
+ }
+
+ err = pci_request_regions(pdev, DRIVER_NAME);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
+ goto fail_resources;
+ }
+
+ hermes_io = pci_iomap(pdev, 0, 0);
+ if (!hermes_io) {
+ printk(KERN_ERR PFX "Cannot remap chipset registers\n");
+ err = -EIO;
+ goto fail_map_hermes;
+ }
+
+ /* Allocate network device */
+ dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
+ orinoco_pci_cor_reset, NULL);
+ if (!dev) {
+ printk(KERN_ERR PFX "Cannot allocate network device\n");
+ err = -ENOMEM;
+ goto fail_alloc;
+ }
+
+ priv = netdev_priv(dev);
+ card = priv->card;
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING);
+
+ err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
+ dev->name, dev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
+ err = -EBUSY;
+ goto fail_irq;
+ }
+
+ err = orinoco_pci_cor_reset(priv);
+ if (err) {
+ printk(KERN_ERR PFX "Initial reset failed\n");
+ goto fail;
+ }
+
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot register network device\n");
+ goto fail;
+ }
+
+ pci_set_drvdata(pdev, dev);
+ printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
+ pci_name(pdev));
+
+ return 0;
+
+ fail:
+ free_irq(pdev->irq, dev);
+
+ fail_irq:
+ pci_set_drvdata(pdev, NULL);
+ free_orinocodev(dev);
+
+ fail_alloc:
+ pci_iounmap(pdev, hermes_io);
+
+ fail_map_hermes:
+ pci_release_regions(pdev);
+
+ fail_resources:
+ pci_disable_device(pdev);
+
+ return err;
+}
+
+static void __devexit orinoco_pci_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ unregister_netdev(dev);
+ free_irq(pdev->irq, dev);
+ pci_set_drvdata(pdev, NULL);
+ free_orinocodev(dev);
+ pci_iounmap(pdev, priv->hw.iobase);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+static struct pci_device_id orinoco_pci_id_table[] = {
+ /* Intersil Prism 3 */
+ {0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,},
+ /* Intersil Prism 2.5 */
+ {0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,},
+ /* Samsung MagicLAN SWL-2210P */
+ {0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID,},
+ {0,},
+};
+
+MODULE_DEVICE_TABLE(pci, orinoco_pci_id_table);
+
+static struct pci_driver orinoco_pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = orinoco_pci_id_table,
+ .probe = orinoco_pci_init_one,
+ .remove = __devexit_p(orinoco_pci_remove_one),
+ .suspend = orinoco_pci_suspend,
+ .resume = orinoco_pci_resume,
+};
+
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (Pavel Roskin <proski@gnu.org>,"
+ " David Gibson <hermes@gibson.dropbear.id.au> &"
+ " Jean Tourrilhes <jt@hpl.hp.com>)";
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>");
+MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface");
+MODULE_LICENSE("Dual MPL/GPL");
+
+static int __init orinoco_pci_init(void)
+{
+ printk(KERN_DEBUG "%s\n", version);
+ return pci_register_driver(&orinoco_pci_driver);
+}
+
+static void __exit orinoco_pci_exit(void)
+{
+ pci_unregister_driver(&orinoco_pci_driver);
+}
+
+module_init(orinoco_pci_init);
+module_exit(orinoco_pci_exit);
+
+/*
+ * Local variables:
+ * c-indent-level: 8
+ * c-basic-offset: 8
+ * tab-width: 8
+ * End:
+ */
--- /dev/null
+/* orinoco_pci.h
+ *
+ * Common code for all Orinoco drivers for PCI devices, including
+ * both native PCI and PCMCIA-to-PCI bridges.
+ *
+ * Copyright (C) 2005, Pavel Roskin.
+ * See orinoco.c for license.
+ */
+
+#ifndef _ORINOCO_PCI_H
+#define _ORINOCO_PCI_H
+
+#include <linux/netdevice.h>
+
+/* Driver specific data */
+struct orinoco_pci_card {
+ void __iomem *bridge_io;
+ void __iomem *attr_io;
+};
+
+#ifdef CONFIG_PM
+static int orinoco_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+ int err;
+
+ err = orinoco_lock(priv, &flags);
+ if (err) {
+ printk(KERN_ERR "%s: cannot lock hardware for suspend\n",
+ dev->name);
+ return err;
+ }
+
+ err = __orinoco_down(dev);
+ if (err)
+ printk(KERN_WARNING "%s: error %d bringing interface down "
+ "for suspend\n", dev->name, err);
+
+ netif_device_detach(dev);
+
+ priv->hw_unavailable++;
+
+ orinoco_unlock(priv, &flags);
+
+ free_irq(pdev->irq, dev);
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+static int orinoco_pci_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+ int err;
+
+ pci_set_power_state(pdev, 0);
+ err = pci_enable_device(pdev);
+ if (err) {
+ printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
+ dev->name);
+ return err;
+ }
+ pci_restore_state(pdev);
+
+ err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
+ dev->name, dev);
+ if (err) {
+ printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n",
+ dev->name);
+ pci_disable_device(pdev);
+ return -EBUSY;
+ }
+
+ err = orinoco_reinit_firmware(dev);
+ if (err) {
+ printk(KERN_ERR "%s: error %d re-initializing firmware "
+ "on resume\n", dev->name, err);
+ return err;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ netif_device_attach(dev);
+
+ priv->hw_unavailable--;
+
+ if (priv->open && (! priv->hw_unavailable)) {
+ err = __orinoco_up(dev);
+ if (err)
+ printk(KERN_ERR "%s: Error %d restarting card on resume\n",
+ dev->name, err);
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+#else
+#define orinoco_pci_suspend NULL
+#define orinoco_pci_resume NULL
+#endif
+
+#endif /* _ORINOCO_PCI_H */
--- /dev/null
+/* orinoco_plx.c
+ *
+ * Driver for Prism II devices which would usually be driven by orinoco_cs,
+ * but are connected to the PCI bus by a PLX9052.
+ *
+ * Current maintainers are:
+ * Pavel Roskin <proski AT gnu.org>
+ * and David Gibson <hermes AT gibson.dropbear.id.au>
+ *
+ * (C) Copyright David Gibson, IBM Corp. 2001-2003.
+ * Copyright (C) 2001 Daniel Barlow
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ *
+ * Here's the general details on how the PLX9052 adapter works:
+ *
+ * - Two PCI I/O address spaces, one 0x80 long which contains the
+ * PLX9052 registers, and one that's 0x40 long mapped to the PCMCIA
+ * slot I/O address space.
+ *
+ * - One PCI memory address space, mapped to the PCMCIA attribute space
+ * (containing the CIS).
+ *
+ * Using the later, you can read through the CIS data to make sure the
+ * card is compatible with the driver. Keep in mind that the PCMCIA
+ * spec specifies the CIS as the lower 8 bits of each word read from
+ * the CIS, so to read the bytes of the CIS, read every other byte
+ * (0,2,4,...). Passing that test, you need to enable the I/O address
+ * space on the PCMCIA card via the PCMCIA COR register. This is the
+ * first byte following the CIS. In my case (which may not have any
+ * relation to what's on the PRISM2 cards), COR was at offset 0x800
+ * within the PCI memory space. Write 0x41 to the COR register to
+ * enable I/O mode and to select level triggered interrupts. To
+ * confirm you actually succeeded, read the COR register back and make
+ * sure it actually got set to 0x41, in case you have an unexpected
+ * card inserted.
+ *
+ * Following that, you can treat the second PCI I/O address space (the
+ * one that's not 0x80 in length) as the PCMCIA I/O space.
+ *
+ * Note that in the Eumitcom's source for their drivers, they register
+ * the interrupt as edge triggered when registering it with the
+ * Windows kernel. I don't recall how to register edge triggered on
+ * Linux (if it can be done at all). But in some experimentation, I
+ * don't see much operational difference between using either
+ * interrupt mode. Don't mess with the interrupt mode in the COR
+ * register though, as the PLX9052 wants level triggers with the way
+ * the serial EEPROM configures it on the WL11000.
+ *
+ * There's some other little quirks related to timing that I bumped
+ * into, but I don't recall right now. Also, there's two variants of
+ * the WL11000 I've seen, revision A1 and T2. These seem to differ
+ * slightly in the timings configured in the wait-state generator in
+ * the PLX9052. There have also been some comments from Eumitcom that
+ * cards shouldn't be hot swapped, apparently due to risk of cooking
+ * the PLX9052. I'm unsure why they believe this, as I can't see
+ * anything in the design that would really cause a problem, except
+ * for crashing drivers not written to expect it. And having developed
+ * drivers for the WL11000, I'd say it's quite tricky to write code
+ * that will successfully deal with a hot unplug. Very odd things
+ * happen on the I/O side of things. But anyway, be warned. Despite
+ * that, I've hot-swapped a number of times during debugging and
+ * driver development for various reasons (stuck WAIT# line after the
+ * radio card's firmware locks up).
+ */
+
+#define DRIVER_NAME "orinoco_plx"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <pcmcia/cisreg.h>
+
+#include "orinoco.h"
+#include "orinoco_pci.h"
+
+#define COR_OFFSET (0x3e0) /* COR attribute offset of Prism2 PC card */
+#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
+#define COR_RESET (0x80) /* reset bit in the COR register */
+#define PLX_RESET_TIME (500) /* milliseconds */
+
+#define PLX_INTCSR 0x4c /* Interrupt Control & Status Register */
+#define PLX_INTCSR_INTEN (1<<6) /* Interrupt Enable bit */
+
+/*
+ * Do a soft reset of the card using the Configuration Option Register
+ */
+static int orinoco_plx_cor_reset(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ struct orinoco_pci_card *card = priv->card;
+ unsigned long timeout;
+ u16 reg;
+
+ iowrite8(COR_VALUE | COR_RESET, card->attr_io + COR_OFFSET);
+ mdelay(1);
+
+ iowrite8(COR_VALUE, card->attr_io + COR_OFFSET);
+ mdelay(1);
+
+ /* Just in case, wait more until the card is no longer busy */
+ timeout = jiffies + (PLX_RESET_TIME * HZ / 1000);
+ reg = hermes_read_regn(hw, CMD);
+ while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
+ mdelay(1);
+ reg = hermes_read_regn(hw, CMD);
+ }
+
+ /* Still busy? */
+ if (reg & HERMES_CMD_BUSY) {
+ printk(KERN_ERR PFX "Busy timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int orinoco_plx_hw_init(struct orinoco_pci_card *card)
+{
+ int i;
+ u32 csr_reg;
+ static const u8 cis_magic[] = {
+ 0x01, 0x03, 0x00, 0x00, 0xff, 0x17, 0x04, 0x67
+ };
+
+ printk(KERN_DEBUG PFX "CIS: ");
+ for (i = 0; i < 16; i++) {
+ printk("%02X:", ioread8(card->attr_io + (i << 1)));
+ }
+ printk("\n");
+
+ /* Verify whether a supported PC card is present */
+ /* FIXME: we probably need to be smarted about this */
+ for (i = 0; i < sizeof(cis_magic); i++) {
+ if (cis_magic[i] != ioread8(card->attr_io + (i << 1))) {
+ printk(KERN_ERR PFX "The CIS value of Prism2 PC "
+ "card is unexpected\n");
+ return -ENODEV;
+ }
+ }
+
+ /* bjoern: We need to tell the card to enable interrupts, in
+ case the serial eprom didn't do this already. See the
+ PLX9052 data book, p8-1 and 8-24 for reference. */
+ csr_reg = ioread32(card->bridge_io + PLX_INTCSR);
+ if (!(csr_reg & PLX_INTCSR_INTEN)) {
+ csr_reg |= PLX_INTCSR_INTEN;
+ iowrite32(csr_reg, card->bridge_io + PLX_INTCSR);
+ csr_reg = ioread32(card->bridge_io + PLX_INTCSR);
+ if (!(csr_reg & PLX_INTCSR_INTEN)) {
+ printk(KERN_ERR PFX "Cannot enable interrupts\n");
+ return -EIO;
+ }
+ }
+
+ return 0;
+}
+
+static int orinoco_plx_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int err;
+ struct orinoco_private *priv;
+ struct orinoco_pci_card *card;
+ struct net_device *dev;
+ void __iomem *hermes_io, *attr_io, *bridge_io;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot enable PCI device\n");
+ return err;
+ }
+
+ err = pci_request_regions(pdev, DRIVER_NAME);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
+ goto fail_resources;
+ }
+
+ bridge_io = pci_iomap(pdev, 1, 0);
+ if (!bridge_io) {
+ printk(KERN_ERR PFX "Cannot map bridge registers\n");
+ err = -EIO;
+ goto fail_map_bridge;
+ }
+
+ attr_io = pci_iomap(pdev, 2, 0);
+ if (!attr_io) {
+ printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n");
+ err = -EIO;
+ goto fail_map_attr;
+ }
+
+ hermes_io = pci_iomap(pdev, 3, 0);
+ if (!hermes_io) {
+ printk(KERN_ERR PFX "Cannot map chipset registers\n");
+ err = -EIO;
+ goto fail_map_hermes;
+ }
+
+ /* Allocate network device */
+ dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
+ orinoco_plx_cor_reset, NULL);
+ if (!dev) {
+ printk(KERN_ERR PFX "Cannot allocate network device\n");
+ err = -ENOMEM;
+ goto fail_alloc;
+ }
+
+ priv = netdev_priv(dev);
+ card = priv->card;
+ card->bridge_io = bridge_io;
+ card->attr_io = attr_io;
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
+
+ err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
+ dev->name, dev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
+ err = -EBUSY;
+ goto fail_irq;
+ }
+
+ err = orinoco_plx_hw_init(card);
+ if (err) {
+ printk(KERN_ERR PFX "Hardware initialization failed\n");
+ goto fail;
+ }
+
+ err = orinoco_plx_cor_reset(priv);
+ if (err) {
+ printk(KERN_ERR PFX "Initial reset failed\n");
+ goto fail;
+ }
+
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot register network device\n");
+ goto fail;
+ }
+
+ pci_set_drvdata(pdev, dev);
+ printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
+ pci_name(pdev));
+
+ return 0;
+
+ fail:
+ free_irq(pdev->irq, dev);
+
+ fail_irq:
+ pci_set_drvdata(pdev, NULL);
+ free_orinocodev(dev);
+
+ fail_alloc:
+ pci_iounmap(pdev, hermes_io);
+
+ fail_map_hermes:
+ pci_iounmap(pdev, attr_io);
+
+ fail_map_attr:
+ pci_iounmap(pdev, bridge_io);
+
+ fail_map_bridge:
+ pci_release_regions(pdev);
+
+ fail_resources:
+ pci_disable_device(pdev);
+
+ return err;
+}
+
+static void __devexit orinoco_plx_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_pci_card *card = priv->card;
+
+ unregister_netdev(dev);
+ free_irq(pdev->irq, dev);
+ pci_set_drvdata(pdev, NULL);
+ free_orinocodev(dev);
+ pci_iounmap(pdev, priv->hw.iobase);
+ pci_iounmap(pdev, card->attr_io);
+ pci_iounmap(pdev, card->bridge_io);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+static struct pci_device_id orinoco_plx_id_table[] = {
+ {0x111a, 0x1023, PCI_ANY_ID, PCI_ANY_ID,}, /* Siemens SpeedStream SS1023 */
+ {0x1385, 0x4100, PCI_ANY_ID, PCI_ANY_ID,}, /* Netgear MA301 */
+ {0x15e8, 0x0130, PCI_ANY_ID, PCI_ANY_ID,}, /* Correga - does this work? */
+ {0x1638, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* SMC EZConnect SMC2602W,
+ Eumitcom PCI WL11000,
+ Addtron AWA-100 */
+ {0x16ab, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* Global Sun Tech GL24110P */
+ {0x16ab, 0x1101, PCI_ANY_ID, PCI_ANY_ID,}, /* Reported working, but unknown */
+ {0x16ab, 0x1102, PCI_ANY_ID, PCI_ANY_ID,}, /* Linksys WDT11 */
+ {0x16ec, 0x3685, PCI_ANY_ID, PCI_ANY_ID,}, /* USR 2415 */
+ {0xec80, 0xec00, PCI_ANY_ID, PCI_ANY_ID,}, /* Belkin F5D6000 tested by
+ Brendan W. McAdams <rit AT jacked-in.org> */
+ {0x10b7, 0x7770, PCI_ANY_ID, PCI_ANY_ID,}, /* 3Com AirConnect PCI tested by
+ Damien Persohn <damien AT persohn.net> */
+ {0,},
+};
+
+MODULE_DEVICE_TABLE(pci, orinoco_plx_id_table);
+
+static struct pci_driver orinoco_plx_driver = {
+ .name = DRIVER_NAME,
+ .id_table = orinoco_plx_id_table,
+ .probe = orinoco_plx_init_one,
+ .remove = __devexit_p(orinoco_plx_remove_one),
+ .suspend = orinoco_pci_suspend,
+ .resume = orinoco_pci_resume,
+};
+
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (Pavel Roskin <proski@gnu.org>,"
+ " David Gibson <hermes@gibson.dropbear.id.au>,"
+ " Daniel Barlow <dan@telent.net>)";
+MODULE_AUTHOR("Daniel Barlow <dan@telent.net>");
+MODULE_DESCRIPTION("Driver for wireless LAN cards using the PLX9052 PCI bridge");
+MODULE_LICENSE("Dual MPL/GPL");
+
+static int __init orinoco_plx_init(void)
+{
+ printk(KERN_DEBUG "%s\n", version);
+ return pci_register_driver(&orinoco_plx_driver);
+}
+
+static void __exit orinoco_plx_exit(void)
+{
+ pci_unregister_driver(&orinoco_plx_driver);
+}
+
+module_init(orinoco_plx_init);
+module_exit(orinoco_plx_exit);
+
+/*
+ * Local variables:
+ * c-indent-level: 8
+ * c-basic-offset: 8
+ * tab-width: 8
+ * End:
+ */
--- /dev/null
+/* orinoco_tmd.c
+ *
+ * Driver for Prism II devices which would usually be driven by orinoco_cs,
+ * but are connected to the PCI bus by a TMD7160.
+ *
+ * Copyright (C) 2003 Joerg Dorchain <joerg AT dorchain.net>
+ * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ *
+ * The actual driving is done by orinoco.c, this is just resource
+ * allocation stuff.
+ *
+ * This driver is modeled after the orinoco_plx driver. The main
+ * difference is that the TMD chip has only IO port ranges and doesn't
+ * provide access to the PCMCIA attribute space.
+ *
+ * Pheecom sells cards with the TMD chip as "ASIC version"
+ */
+
+#define DRIVER_NAME "orinoco_tmd"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <pcmcia/cisreg.h>
+
+#include "orinoco.h"
+#include "orinoco_pci.h"
+
+#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
+#define COR_RESET (0x80) /* reset bit in the COR register */
+#define TMD_RESET_TIME (500) /* milliseconds */
+
+/*
+ * Do a soft reset of the card using the Configuration Option Register
+ */
+static int orinoco_tmd_cor_reset(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ struct orinoco_pci_card *card = priv->card;
+ unsigned long timeout;
+ u16 reg;
+
+ iowrite8(COR_VALUE | COR_RESET, card->bridge_io);
+ mdelay(1);
+
+ iowrite8(COR_VALUE, card->bridge_io);
+ mdelay(1);
+
+ /* Just in case, wait more until the card is no longer busy */
+ timeout = jiffies + (TMD_RESET_TIME * HZ / 1000);
+ reg = hermes_read_regn(hw, CMD);
+ while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
+ mdelay(1);
+ reg = hermes_read_regn(hw, CMD);
+ }
+
+ /* Still busy? */
+ if (reg & HERMES_CMD_BUSY) {
+ printk(KERN_ERR PFX "Busy timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+
+static int orinoco_tmd_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int err;
+ struct orinoco_private *priv;
+ struct orinoco_pci_card *card;
+ struct net_device *dev;
+ void __iomem *hermes_io, *bridge_io;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot enable PCI device\n");
+ return err;
+ }
+
+ err = pci_request_regions(pdev, DRIVER_NAME);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
+ goto fail_resources;
+ }
+
+ bridge_io = pci_iomap(pdev, 1, 0);
+ if (!bridge_io) {
+ printk(KERN_ERR PFX "Cannot map bridge registers\n");
+ err = -EIO;
+ goto fail_map_bridge;
+ }
+
+ hermes_io = pci_iomap(pdev, 2, 0);
+ if (!hermes_io) {
+ printk(KERN_ERR PFX "Cannot map chipset registers\n");
+ err = -EIO;
+ goto fail_map_hermes;
+ }
+
+ /* Allocate network device */
+ dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
+ orinoco_tmd_cor_reset, NULL);
+ if (!dev) {
+ printk(KERN_ERR PFX "Cannot allocate network device\n");
+ err = -ENOMEM;
+ goto fail_alloc;
+ }
+
+ priv = netdev_priv(dev);
+ card = priv->card;
+ card->bridge_io = bridge_io;
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
+
+ err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
+ dev->name, dev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
+ err = -EBUSY;
+ goto fail_irq;
+ }
+
+ err = orinoco_tmd_cor_reset(priv);
+ if (err) {
+ printk(KERN_ERR PFX "Initial reset failed\n");
+ goto fail;
+ }
+
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot register network device\n");
+ goto fail;
+ }
+
+ pci_set_drvdata(pdev, dev);
+ printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
+ pci_name(pdev));
+
+ return 0;
+
+ fail:
+ free_irq(pdev->irq, dev);
+
+ fail_irq:
+ pci_set_drvdata(pdev, NULL);
+ free_orinocodev(dev);
+
+ fail_alloc:
+ pci_iounmap(pdev, hermes_io);
+
+ fail_map_hermes:
+ pci_iounmap(pdev, bridge_io);
+
+ fail_map_bridge:
+ pci_release_regions(pdev);
+
+ fail_resources:
+ pci_disable_device(pdev);
+
+ return err;
+}
+
+static void __devexit orinoco_tmd_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_pci_card *card = priv->card;
+
+ unregister_netdev(dev);
+ free_irq(pdev->irq, dev);
+ pci_set_drvdata(pdev, NULL);
+ free_orinocodev(dev);
+ pci_iounmap(pdev, priv->hw.iobase);
+ pci_iounmap(pdev, card->bridge_io);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+static struct pci_device_id orinoco_tmd_id_table[] = {
+ {0x15e8, 0x0131, PCI_ANY_ID, PCI_ANY_ID,}, /* NDC and OEMs, e.g. pheecom */
+ {0,},
+};
+
+MODULE_DEVICE_TABLE(pci, orinoco_tmd_id_table);
+
+static struct pci_driver orinoco_tmd_driver = {
+ .name = DRIVER_NAME,
+ .id_table = orinoco_tmd_id_table,
+ .probe = orinoco_tmd_init_one,
+ .remove = __devexit_p(orinoco_tmd_remove_one),
+ .suspend = orinoco_pci_suspend,
+ .resume = orinoco_pci_resume,
+};
+
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (Joerg Dorchain <joerg@dorchain.net>)";
+MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
+MODULE_DESCRIPTION("Driver for wireless LAN cards using the TMD7160 PCI bridge");
+MODULE_LICENSE("Dual MPL/GPL");
+
+static int __init orinoco_tmd_init(void)
+{
+ printk(KERN_DEBUG "%s\n", version);
+ return pci_register_driver(&orinoco_tmd_driver);
+}
+
+static void __exit orinoco_tmd_exit(void)
+{
+ pci_unregister_driver(&orinoco_tmd_driver);
+}
+
+module_init(orinoco_tmd_init);
+module_exit(orinoco_tmd_exit);
+
+/*
+ * Local variables:
+ * c-indent-level: 8
+ * c-basic-offset: 8
+ * tab-width: 8
+ * End:
+ */
--- /dev/null
+/*
+ * Driver for 802.11b cards using RAM-loadable Symbol firmware, such as
+ * Symbol Wireless Networker LA4137, CompactFlash cards by Socket
+ * Communications and Intel PRO/Wireless 2011B.
+ *
+ * The driver implements Symbol firmware download. The rest is handled
+ * in hermes.c and orinoco.c.
+ *
+ * Utilities for downloading the Symbol firmware are available at
+ * http://sourceforge.net/projects/orinoco/
+ *
+ * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org>
+ * Portions based on orinoco_cs.c:
+ * Copyright (C) David Gibson, Linuxcare Australia
+ * Portions based on Spectrum24tDnld.c from original spectrum24 driver:
+ * Copyright (C) Symbol Technologies.
+ *
+ * See copyright notice in file orinoco.c.
+ */
+
+#define DRIVER_NAME "spectrum_cs"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+
+#include "orinoco.h"
+
+/********************************************************************/
+/* Module stuff */
+/********************************************************************/
+
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>");
+MODULE_DESCRIPTION("Driver for Symbol Spectrum24 Trilogy cards with firmware downloader");
+MODULE_LICENSE("Dual MPL/GPL");
+
+/* Module parameters */
+
+/* Some D-Link cards have buggy CIS. They do work at 5v properly, but
+ * don't have any CIS entry for it. This workaround it... */
+static int ignore_cis_vcc; /* = 0 */
+module_param(ignore_cis_vcc, int, 0);
+MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
+
+/********************************************************************/
+/* Data structures */
+/********************************************************************/
+
+/* PCMCIA specific device information (goes in the card field of
+ * struct orinoco_private */
+struct orinoco_pccard {
+ struct pcmcia_device *p_dev;
+ dev_node_t node;
+};
+
+/********************************************************************/
+/* Function prototypes */
+/********************************************************************/
+
+static int spectrum_cs_config(struct pcmcia_device *link);
+static void spectrum_cs_release(struct pcmcia_device *link);
+
+/* Constants for the CISREG_CCSR register */
+#define HCR_RUN 0x07 /* run firmware after reset */
+#define HCR_IDLE 0x0E /* don't run firmware after reset */
+#define HCR_MEM16 0x10 /* memory width bit, should be preserved */
+
+
+#define CS_CHECK(fn, ret) \
+ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+/*
+ * Reset the card using configuration registers COR and CCSR.
+ * If IDLE is 1, stop the firmware, so that it can be safely rewritten.
+ */
+static int
+spectrum_reset(struct pcmcia_device *link, int idle)
+{
+ int last_ret, last_fn;
+ conf_reg_t reg;
+ u_int save_cor;
+
+ /* Doing it if hardware is gone is guaranteed crash */
+ if (!pcmcia_dev_present(link))
+ return -ENODEV;
+
+ /* Save original COR value */
+ reg.Function = 0;
+ reg.Action = CS_READ;
+ reg.Offset = CISREG_COR;
+ CS_CHECK(AccessConfigurationRegister,
+ pcmcia_access_configuration_register(link, ®));
+ save_cor = reg.Value;
+
+ /* Soft-Reset card */
+ reg.Action = CS_WRITE;
+ reg.Offset = CISREG_COR;
+ reg.Value = (save_cor | COR_SOFT_RESET);
+ CS_CHECK(AccessConfigurationRegister,
+ pcmcia_access_configuration_register(link, ®));
+ udelay(1000);
+
+ /* Read CCSR */
+ reg.Action = CS_READ;
+ reg.Offset = CISREG_CCSR;
+ CS_CHECK(AccessConfigurationRegister,
+ pcmcia_access_configuration_register(link, ®));
+
+ /*
+ * Start or stop the firmware. Memory width bit should be
+ * preserved from the value we've just read.
+ */
+ reg.Action = CS_WRITE;
+ reg.Offset = CISREG_CCSR;
+ reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16);
+ CS_CHECK(AccessConfigurationRegister,
+ pcmcia_access_configuration_register(link, ®));
+ udelay(1000);
+
+ /* Restore original COR configuration index */
+ reg.Action = CS_WRITE;
+ reg.Offset = CISREG_COR;
+ reg.Value = (save_cor & ~COR_SOFT_RESET);
+ CS_CHECK(AccessConfigurationRegister,
+ pcmcia_access_configuration_register(link, ®));
+ udelay(1000);
+ return 0;
+
+ cs_failed:
+ cs_error(link, last_fn, last_ret);
+ return -ENODEV;
+}
+
+/********************************************************************/
+/* Device methods */
+/********************************************************************/
+
+static int
+spectrum_cs_hard_reset(struct orinoco_private *priv)
+{
+ struct orinoco_pccard *card = priv->card;
+ struct pcmcia_device *link = card->p_dev;
+
+ /* Soft reset using COR and HCR */
+ spectrum_reset(link, 0);
+
+ return 0;
+}
+
+static int
+spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle)
+{
+ struct orinoco_pccard *card = priv->card;
+ struct pcmcia_device *link = card->p_dev;
+
+ return spectrum_reset(link, idle);
+}
+
+/********************************************************************/
+/* PCMCIA stuff */
+/********************************************************************/
+
+/*
+ * This creates an "instance" of the driver, allocating local data
+ * structures for one device. The device is registered with Card
+ * Services.
+ *
+ * The dev_link structure is initialized, but we don't actually
+ * configure the card at this point -- we wait until we receive a card
+ * insertion event. */
+static int
+spectrum_cs_probe(struct pcmcia_device *link)
+{
+ struct net_device *dev;
+ struct orinoco_private *priv;
+ struct orinoco_pccard *card;
+
+ dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
+ spectrum_cs_hard_reset,
+ spectrum_cs_stop_firmware);
+ if (! dev)
+ return -ENOMEM;
+ priv = netdev_priv(dev);
+ card = priv->card;
+
+ /* Link both structures together */
+ card->p_dev = link;
+ link->priv = dev;
+
+ /* Interrupt setup */
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
+ link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Handler = orinoco_interrupt;
+ link->irq.Instance = dev;
+
+ /* General socket configuration defaults can go here. In this
+ * client, we assume very little, and rely on the CIS for
+ * almost everything. In most clients, many details (i.e.,
+ * number, sizes, and attributes of IO windows) are fixed by
+ * the nature of the device, and can be hard-wired here. */
+ link->conf.Attributes = 0;
+ link->conf.IntType = INT_MEMORY_AND_IO;
+
+ return spectrum_cs_config(link);
+} /* spectrum_cs_attach */
+
+/*
+ * This deletes a driver "instance". The device is de-registered with
+ * Card Services. If it has been released, all local data structures
+ * are freed. Otherwise, the structures will be freed when the device
+ * is released.
+ */
+static void spectrum_cs_detach(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ if (link->dev_node)
+ unregister_netdev(dev);
+
+ spectrum_cs_release(link);
+
+ free_orinocodev(dev);
+} /* spectrum_cs_detach */
+
+/*
+ * spectrum_cs_config() is scheduled to run after a CARD_INSERTION
+ * event is received, to configure the PCMCIA socket, and to make the
+ * device available to the system.
+ */
+
+static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ goto next_entry;
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ /* Do we need to allocate an interrupt? */
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ goto next_entry;
+ }
+ return 0;
+
+next_entry:
+ pcmcia_disable_device(p_dev);
+ return -ENODEV;
+};
+
+static int
+spectrum_cs_config(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_pccard *card = priv->card;
+ hermes_t *hw = &priv->hw;
+ int last_fn, last_ret;
+ void __iomem *mem;
+
+ /*
+ * In this loop, we scan the CIS for configuration table
+ * entries, each of which describes a valid card
+ * configuration, including voltage, IO window, memory window,
+ * and interrupt settings.
+ *
+ * We make no assumptions about the card to be configured: we
+ * use just the information available in the CIS. In an ideal
+ * world, this would work for any PCMCIA card, but it requires
+ * a complete and accurate CIS. In practice, a driver usually
+ * "knows" most of these things without consulting the CIS,
+ * and most client drivers will only use the CIS to fill in
+ * implementation-defined details.
+ */
+ last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
+ if (last_ret) {
+ if (!ignore_cis_vcc)
+ printk(KERN_ERR PFX "GetNextTuple(): No matching "
+ "CIS configuration. Maybe you need the "
+ "ignore_cis_vcc=1 parameter.\n");
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
+ }
+
+ /*
+ * Allocate an interrupt line. Note that this does not assign
+ * a handler to the interrupt, unless the 'Handler' member of
+ * the irq structure is initialized.
+ */
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+
+ /* We initialize the hermes structure before completing PCMCIA
+ * configuration just in case the interrupt handler gets
+ * called. */
+ mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
+ if (!mem)
+ goto cs_failed;
+
+ hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
+
+ /*
+ * This actually configures the PCMCIA socket -- setting up
+ * the I/O windows and the interrupt mapping, and putting the
+ * card and host interface into "Memory and IO" mode.
+ */
+ CS_CHECK(RequestConfiguration,
+ pcmcia_request_configuration(link, &link->conf));
+
+ /* Ok, we have the configuration, prepare to register the netdev */
+ dev->base_addr = link->io.BasePort1;
+ dev->irq = link->irq.AssignedIRQ;
+ card->node.major = card->node.minor = 0;
+
+ /* Reset card */
+ if (spectrum_cs_hard_reset(priv) != 0) {
+ goto failed;
+ }
+
+ SET_NETDEV_DEV(dev, &handle_to_dev(link));
+ /* Tell the stack we exist */
+ if (register_netdev(dev) != 0) {
+ printk(KERN_ERR PFX "register_netdev() failed\n");
+ goto failed;
+ }
+
+ /* At this point, the dev_node_t structure(s) needs to be
+ * initialized and arranged in a linked list at link->dev_node. */
+ strcpy(card->node.dev_name, dev->name);
+ link->dev_node = &card->node; /* link->dev_node being non-NULL is also
+ used to indicate that the
+ net_device has been registered */
+
+ /* Finally, report what we've done */
+ printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
+ "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
+ link->irq.AssignedIRQ, link->io.BasePort1,
+ link->io.BasePort1 + link->io.NumPorts1 - 1);
+
+ return 0;
+
+ cs_failed:
+ cs_error(link, last_fn, last_ret);
+
+ failed:
+ spectrum_cs_release(link);
+ return -ENODEV;
+} /* spectrum_cs_config */
+
+/*
+ * After a card is removed, spectrum_cs_release() will unregister the
+ * device, and release the PCMCIA configuration. If the device is
+ * still open, this will be postponed until it is closed.
+ */
+static void
+spectrum_cs_release(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ /* We're committed to taking the device away now, so mark the
+ * hardware as unavailable */
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->hw_unavailable++;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ pcmcia_disable_device(link);
+ if (priv->hw.iobase)
+ ioport_unmap(priv->hw.iobase);
+} /* spectrum_cs_release */
+
+
+static int
+spectrum_cs_suspend(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+ int err = 0;
+
+ /* Mark the device as stopped, to block IO until later */
+ spin_lock_irqsave(&priv->lock, flags);
+
+ err = __orinoco_down(dev);
+ if (err)
+ printk(KERN_WARNING "%s: Error %d downing interface\n",
+ dev->name, err);
+
+ netif_device_detach(dev);
+ priv->hw_unavailable++;
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return err;
+}
+
+static int
+spectrum_cs_resume(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ netif_device_attach(dev);
+ priv->hw_unavailable--;
+ schedule_work(&priv->reset_work);
+
+ return 0;
+}
+
+
+/********************************************************************/
+/* Module initialization */
+/********************************************************************/
+
+/* Can't be declared "const" or the whole __initdata section will
+ * become const */
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (Pavel Roskin <proski@gnu.org>,"
+ " David Gibson <hermes@gibson.dropbear.id.au>, et al)";
+
+static struct pcmcia_device_id spectrum_cs_ids[] = {
+ PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */
+ PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */
+ PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless LAN PC Card", 0x816cc815, 0x6fbf459a), /* 2011B, not 2011 */
+ PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids);
+
+static struct pcmcia_driver orinoco_driver = {
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = DRIVER_NAME,
+ },
+ .probe = spectrum_cs_probe,
+ .remove = spectrum_cs_detach,
+ .suspend = spectrum_cs_suspend,
+ .resume = spectrum_cs_resume,
+ .id_table = spectrum_cs_ids,
+};
+
+static int __init
+init_spectrum_cs(void)
+{
+ printk(KERN_DEBUG "%s\n", version);
+
+ return pcmcia_register_driver(&orinoco_driver);
+}
+
+static void __exit
+exit_spectrum_cs(void)
+{
+ pcmcia_unregister_driver(&orinoco_driver);
+}
+
+module_init(init_spectrum_cs);
+module_exit(exit_spectrum_cs);
+++ /dev/null
-/* orinoco_cs.c (formerly known as dldwd_cs.c)
- *
- * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
- * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
- * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
- * It should also be usable on various Prism II based cards such as the
- * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
- * cards such as the 3Com AirConnect and Ericsson WLAN.
- *
- * Copyright notice & release notes in file orinoco.c
- */
-
-#define DRIVER_NAME "orinoco_cs"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-
-#include "orinoco.h"
-
-/********************************************************************/
-/* Module stuff */
-/********************************************************************/
-
-MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
-MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards");
-MODULE_LICENSE("Dual MPL/GPL");
-
-/* Module parameters */
-
-/* Some D-Link cards have buggy CIS. They do work at 5v properly, but
- * don't have any CIS entry for it. This workaround it... */
-static int ignore_cis_vcc; /* = 0 */
-module_param(ignore_cis_vcc, int, 0);
-MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
-
-/********************************************************************/
-/* Data structures */
-/********************************************************************/
-
-/* PCMCIA specific device information (goes in the card field of
- * struct orinoco_private */
-struct orinoco_pccard {
- struct pcmcia_device *p_dev;
- dev_node_t node;
-
- /* Used to handle hard reset */
- /* yuck, we need this hack to work around the insanity of the
- * PCMCIA layer */
- unsigned long hard_reset_in_progress;
-};
-
-
-/********************************************************************/
-/* Function prototypes */
-/********************************************************************/
-
-static int orinoco_cs_config(struct pcmcia_device *link);
-static void orinoco_cs_release(struct pcmcia_device *link);
-static void orinoco_cs_detach(struct pcmcia_device *p_dev);
-
-/********************************************************************/
-/* Device methods */
-/********************************************************************/
-
-static int
-orinoco_cs_hard_reset(struct orinoco_private *priv)
-{
- struct orinoco_pccard *card = priv->card;
- struct pcmcia_device *link = card->p_dev;
- int err;
-
- /* We need atomic ops here, because we're not holding the lock */
- set_bit(0, &card->hard_reset_in_progress);
-
- err = pcmcia_reset_card(link->socket);
- if (err)
- return err;
-
- msleep(100);
- clear_bit(0, &card->hard_reset_in_progress);
-
- return 0;
-}
-
-/********************************************************************/
-/* PCMCIA stuff */
-/********************************************************************/
-
-/*
- * This creates an "instance" of the driver, allocating local data
- * structures for one device. The device is registered with Card
- * Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a card
- * insertion event. */
-static int
-orinoco_cs_probe(struct pcmcia_device *link)
-{
- struct net_device *dev;
- struct orinoco_private *priv;
- struct orinoco_pccard *card;
-
- dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
- orinoco_cs_hard_reset, NULL);
- if (! dev)
- return -ENOMEM;
- priv = netdev_priv(dev);
- card = priv->card;
-
- /* Link both structures together */
- card->p_dev = link;
- link->priv = dev;
-
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
- link->irq.IRQInfo1 = IRQ_LEVEL_ID;
- link->irq.Handler = orinoco_interrupt;
- link->irq.Instance = dev;
-
- /* General socket configuration defaults can go here. In this
- * client, we assume very little, and rely on the CIS for
- * almost everything. In most clients, many details (i.e.,
- * number, sizes, and attributes of IO windows) are fixed by
- * the nature of the device, and can be hard-wired here. */
- link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
-
- return orinoco_cs_config(link);
-} /* orinoco_cs_attach */
-
-/*
- * This deletes a driver "instance". The device is de-registered with
- * Card Services. If it has been released, all local data structures
- * are freed. Otherwise, the structures will be freed when the device
- * is released.
- */
-static void orinoco_cs_detach(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- if (link->dev_node)
- unregister_netdev(dev);
-
- orinoco_cs_release(link);
-
- free_orinocodev(dev);
-} /* orinoco_cs_detach */
-
-/*
- * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
- * event is received, to configure the PCMCIA socket, and to make the
- * device available to the system.
- */
-
-#define CS_CHECK(fn, ret) do { \
- last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
- } while (0)
-
-static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cfg,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
- void *priv_data)
-{
- if (cfg->index == 0)
- goto next_entry;
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
- if (!ignore_cis_vcc)
- goto next_entry;
- }
- } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
- if (!ignore_cis_vcc)
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- p_dev->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
- p_dev->conf.Vpp =
- dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- /* Do we need to allocate an interrupt? */
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
- }
-
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
- goto next_entry;
- }
- return 0;
-
-next_entry:
- pcmcia_disable_device(p_dev);
- return -ENODEV;
-};
-
-static int
-orinoco_cs_config(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- struct orinoco_private *priv = netdev_priv(dev);
- struct orinoco_pccard *card = priv->card;
- hermes_t *hw = &priv->hw;
- int last_fn, last_ret;
- void __iomem *mem;
-
- /*
- * In this loop, we scan the CIS for configuration table
- * entries, each of which describes a valid card
- * configuration, including voltage, IO window, memory window,
- * and interrupt settings.
- *
- * We make no assumptions about the card to be configured: we
- * use just the information available in the CIS. In an ideal
- * world, this would work for any PCMCIA card, but it requires
- * a complete and accurate CIS. In practice, a driver usually
- * "knows" most of these things without consulting the CIS,
- * and most client drivers will only use the CIS to fill in
- * implementation-defined details.
- */
- last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
- if (last_ret) {
- if (!ignore_cis_vcc)
- printk(KERN_ERR PFX "GetNextTuple(): No matching "
- "CIS configuration. Maybe you need the "
- "ignore_cis_vcc=1 parameter.\n");
- cs_error(link, RequestIO, last_ret);
- goto failed;
- }
-
- /*
- * Allocate an interrupt line. Note that this does not assign
- * a handler to the interrupt, unless the 'Handler' member of
- * the irq structure is initialized.
- */
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-
- /* We initialize the hermes structure before completing PCMCIA
- * configuration just in case the interrupt handler gets
- * called. */
- mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
- if (!mem)
- goto cs_failed;
-
- hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
-
- /*
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping, and putting the
- * card and host interface into "Memory and IO" mode.
- */
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
-
- /* Ok, we have the configuration, prepare to register the netdev */
- dev->base_addr = link->io.BasePort1;
- dev->irq = link->irq.AssignedIRQ;
- card->node.major = card->node.minor = 0;
-
- SET_NETDEV_DEV(dev, &handle_to_dev(link));
- /* Tell the stack we exist */
- if (register_netdev(dev) != 0) {
- printk(KERN_ERR PFX "register_netdev() failed\n");
- goto failed;
- }
-
- /* At this point, the dev_node_t structure(s) needs to be
- * initialized and arranged in a linked list at link->dev_node. */
- strcpy(card->node.dev_name, dev->name);
- link->dev_node = &card->node; /* link->dev_node being non-NULL is also
- used to indicate that the
- net_device has been registered */
-
- /* Finally, report what we've done */
- printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
- "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
- link->irq.AssignedIRQ, link->io.BasePort1,
- link->io.BasePort1 + link->io.NumPorts1 - 1);
- return 0;
-
- cs_failed:
- cs_error(link, last_fn, last_ret);
-
- failed:
- orinoco_cs_release(link);
- return -ENODEV;
-} /* orinoco_cs_config */
-
-/*
- * After a card is removed, orinoco_cs_release() will unregister the
- * device, and release the PCMCIA configuration. If the device is
- * still open, this will be postponed until it is closed.
- */
-static void
-orinoco_cs_release(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
-
- /* We're committed to taking the device away now, so mark the
- * hardware as unavailable */
- spin_lock_irqsave(&priv->lock, flags);
- priv->hw_unavailable++;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- pcmcia_disable_device(link);
- if (priv->hw.iobase)
- ioport_unmap(priv->hw.iobase);
-} /* orinoco_cs_release */
-
-static int orinoco_cs_suspend(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- struct orinoco_private *priv = netdev_priv(dev);
- struct orinoco_pccard *card = priv->card;
- int err = 0;
- unsigned long flags;
-
- /* This is probably racy, but I can't think of
- a better way, short of rewriting the PCMCIA
- layer to not suck :-( */
- if (! test_bit(0, &card->hard_reset_in_progress)) {
- spin_lock_irqsave(&priv->lock, flags);
-
- err = __orinoco_down(dev);
- if (err)
- printk(KERN_WARNING "%s: Error %d downing interface\n",
- dev->name, err);
-
- netif_device_detach(dev);
- priv->hw_unavailable++;
-
- spin_unlock_irqrestore(&priv->lock, flags);
- }
-
- return 0;
-}
-
-static int orinoco_cs_resume(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- struct orinoco_private *priv = netdev_priv(dev);
- struct orinoco_pccard *card = priv->card;
- int err = 0;
- unsigned long flags;
-
- if (! test_bit(0, &card->hard_reset_in_progress)) {
- err = orinoco_reinit_firmware(dev);
- if (err) {
- printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
- dev->name, err);
- return -EIO;
- }
-
- spin_lock_irqsave(&priv->lock, flags);
-
- netif_device_attach(dev);
- priv->hw_unavailable--;
-
- if (priv->open && ! priv->hw_unavailable) {
- err = __orinoco_up(dev);
- if (err)
- printk(KERN_ERR "%s: Error %d restarting card\n",
- dev->name, err);
- }
-
- spin_unlock_irqrestore(&priv->lock, flags);
- }
-
- return err;
-}
-
-
-/********************************************************************/
-/* Module initialization */
-/********************************************************************/
-
-/* Can't be declared "const" or the whole __initdata section will
- * become const */
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
- " (David Gibson <hermes@gibson.dropbear.id.au>, "
- "Pavel Roskin <proski@gnu.org>, et al)";
-
-static struct pcmcia_device_id orinoco_cs_ids[] = {
- PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
- PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
- PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
- PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
- PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
- PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
- PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
- PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
- PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
- PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
- PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
- PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
- PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
- PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
- PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
- PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
- PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
- PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
- PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
- PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
- PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
- PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
- PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
- PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
- PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
- PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
- PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
- PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
- PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
- PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
- PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
- PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
- PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
- PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
- PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
- PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
- PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
- PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
- PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
- PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
- PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
- PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
- PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
- PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
- PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
- PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
- PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
- PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
- PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
- PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
- PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
- PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
- PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
- PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
- PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
- PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
- PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
- PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
- PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
- PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
- PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
- PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
- PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
- PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
- PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
- PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
- PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
- PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
- PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
- PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
- PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39),
- PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
- PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
- PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
- PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
- PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
- PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
- PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
- PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
- PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
- PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
- PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
-
-static struct pcmcia_driver orinoco_driver = {
- .owner = THIS_MODULE,
- .drv = {
- .name = DRIVER_NAME,
- },
- .probe = orinoco_cs_probe,
- .remove = orinoco_cs_detach,
- .id_table = orinoco_cs_ids,
- .suspend = orinoco_cs_suspend,
- .resume = orinoco_cs_resume,
-};
-
-static int __init
-init_orinoco_cs(void)
-{
- printk(KERN_DEBUG "%s\n", version);
-
- return pcmcia_register_driver(&orinoco_driver);
-}
-
-static void __exit
-exit_orinoco_cs(void)
-{
- pcmcia_unregister_driver(&orinoco_driver);
-}
-
-module_init(init_orinoco_cs);
-module_exit(exit_orinoco_cs);
+++ /dev/null
-/* orinoco_nortel.c
- *
- * Driver for Prism II devices which would usually be driven by orinoco_cs,
- * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in
- * Nortel emobility, Symbol LA-4113 and Symbol LA-4123.
- *
- * Copyright (C) 2002 Tobias Hoffmann
- * (C) 2003 Christoph Jungegger <disdos@traum404.de>
- *
- * Some of this code is borrowed from orinoco_plx.c
- * Copyright (C) 2001 Daniel Barlow
- * Some of this code is borrowed from orinoco_pci.c
- * Copyright (C) 2001 Jean Tourrilhes
- * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
- * has been copied from it. linux-wlan-ng-0.1.10 is originally :
- * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#define DRIVER_NAME "orinoco_nortel"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <pcmcia/cisreg.h>
-
-#include "orinoco.h"
-#include "orinoco_pci.h"
-
-#define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */
-#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
-
-
-/*
- * Do a soft reset of the card using the Configuration Option Register
- * We need this to get going...
- * This is the part of the code that is strongly inspired from wlan-ng
- *
- * Note bis : Don't try to access HERMES_CMD during the reset phase.
- * It just won't work !
- */
-static int orinoco_nortel_cor_reset(struct orinoco_private *priv)
-{
- struct orinoco_pci_card *card = priv->card;
-
- /* Assert the reset until the card notices */
- iowrite16(8, card->bridge_io + 2);
- ioread16(card->attr_io + COR_OFFSET);
- iowrite16(0x80, card->attr_io + COR_OFFSET);
- mdelay(1);
-
- /* Give time for the card to recover from this hard effort */
- iowrite16(0, card->attr_io + COR_OFFSET);
- iowrite16(0, card->attr_io + COR_OFFSET);
- mdelay(1);
-
- /* Set COR as usual */
- iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
- iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
- mdelay(1);
-
- iowrite16(0x228, card->bridge_io + 2);
-
- return 0;
-}
-
-static int orinoco_nortel_hw_init(struct orinoco_pci_card *card)
-{
- int i;
- u32 reg;
-
- /* Setup bridge */
- if (ioread16(card->bridge_io) & 1) {
- printk(KERN_ERR PFX "brg1 answer1 wrong\n");
- return -EBUSY;
- }
- iowrite16(0x118, card->bridge_io + 2);
- iowrite16(0x108, card->bridge_io + 2);
- mdelay(30);
- iowrite16(0x8, card->bridge_io + 2);
- for (i = 0; i < 30; i++) {
- mdelay(30);
- if (ioread16(card->bridge_io) & 0x10) {
- break;
- }
- }
- if (i == 30) {
- printk(KERN_ERR PFX "brg1 timed out\n");
- return -EBUSY;
- }
- if (ioread16(card->attr_io + COR_OFFSET) & 1) {
- printk(KERN_ERR PFX "brg2 answer1 wrong\n");
- return -EBUSY;
- }
- if (ioread16(card->attr_io + COR_OFFSET + 2) & 1) {
- printk(KERN_ERR PFX "brg2 answer2 wrong\n");
- return -EBUSY;
- }
- if (ioread16(card->attr_io + COR_OFFSET + 4) & 1) {
- printk(KERN_ERR PFX "brg2 answer3 wrong\n");
- return -EBUSY;
- }
-
- /* Set the PCMCIA COR register */
- iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
- mdelay(1);
- reg = ioread16(card->attr_io + COR_OFFSET);
- if (reg != COR_VALUE) {
- printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n",
- reg);
- return -EBUSY;
- }
-
- /* Set LEDs */
- iowrite16(1, card->bridge_io + 10);
- return 0;
-}
-
-static int orinoco_nortel_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- int err;
- struct orinoco_private *priv;
- struct orinoco_pci_card *card;
- struct net_device *dev;
- void __iomem *hermes_io, *bridge_io, *attr_io;
-
- err = pci_enable_device(pdev);
- if (err) {
- printk(KERN_ERR PFX "Cannot enable PCI device\n");
- return err;
- }
-
- err = pci_request_regions(pdev, DRIVER_NAME);
- if (err) {
- printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
- goto fail_resources;
- }
-
- bridge_io = pci_iomap(pdev, 0, 0);
- if (!bridge_io) {
- printk(KERN_ERR PFX "Cannot map bridge registers\n");
- err = -EIO;
- goto fail_map_bridge;
- }
-
- attr_io = pci_iomap(pdev, 1, 0);
- if (!attr_io) {
- printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n");
- err = -EIO;
- goto fail_map_attr;
- }
-
- hermes_io = pci_iomap(pdev, 2, 0);
- if (!hermes_io) {
- printk(KERN_ERR PFX "Cannot map chipset registers\n");
- err = -EIO;
- goto fail_map_hermes;
- }
-
- /* Allocate network device */
- dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
- orinoco_nortel_cor_reset, NULL);
- if (!dev) {
- printk(KERN_ERR PFX "Cannot allocate network device\n");
- err = -ENOMEM;
- goto fail_alloc;
- }
-
- priv = netdev_priv(dev);
- card = priv->card;
- card->bridge_io = bridge_io;
- card->attr_io = attr_io;
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
-
- err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
- dev->name, dev);
- if (err) {
- printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
- err = -EBUSY;
- goto fail_irq;
- }
-
- err = orinoco_nortel_hw_init(card);
- if (err) {
- printk(KERN_ERR PFX "Hardware initialization failed\n");
- goto fail;
- }
-
- err = orinoco_nortel_cor_reset(priv);
- if (err) {
- printk(KERN_ERR PFX "Initial reset failed\n");
- goto fail;
- }
-
- err = register_netdev(dev);
- if (err) {
- printk(KERN_ERR PFX "Cannot register network device\n");
- goto fail;
- }
-
- pci_set_drvdata(pdev, dev);
- printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
- pci_name(pdev));
-
- return 0;
-
- fail:
- free_irq(pdev->irq, dev);
-
- fail_irq:
- pci_set_drvdata(pdev, NULL);
- free_orinocodev(dev);
-
- fail_alloc:
- pci_iounmap(pdev, hermes_io);
-
- fail_map_hermes:
- pci_iounmap(pdev, attr_io);
-
- fail_map_attr:
- pci_iounmap(pdev, bridge_io);
-
- fail_map_bridge:
- pci_release_regions(pdev);
-
- fail_resources:
- pci_disable_device(pdev);
-
- return err;
-}
-
-static void __devexit orinoco_nortel_remove_one(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = netdev_priv(dev);
- struct orinoco_pci_card *card = priv->card;
-
- /* Clear LEDs */
- iowrite16(0, card->bridge_io + 10);
-
- unregister_netdev(dev);
- free_irq(pdev->irq, dev);
- pci_set_drvdata(pdev, NULL);
- free_orinocodev(dev);
- pci_iounmap(pdev, priv->hw.iobase);
- pci_iounmap(pdev, card->attr_io);
- pci_iounmap(pdev, card->bridge_io);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-}
-
-static struct pci_device_id orinoco_nortel_id_table[] = {
- /* Nortel emobility PCI */
- {0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,},
- /* Symbol LA-4123 PCI */
- {0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,},
- {0,},
-};
-
-MODULE_DEVICE_TABLE(pci, orinoco_nortel_id_table);
-
-static struct pci_driver orinoco_nortel_driver = {
- .name = DRIVER_NAME,
- .id_table = orinoco_nortel_id_table,
- .probe = orinoco_nortel_init_one,
- .remove = __devexit_p(orinoco_nortel_remove_one),
- .suspend = orinoco_pci_suspend,
- .resume = orinoco_pci_resume,
-};
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
- " (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)";
-MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>");
-MODULE_DESCRIPTION
- ("Driver for wireless LAN cards using the Nortel PCI bridge");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static int __init orinoco_nortel_init(void)
-{
- printk(KERN_DEBUG "%s\n", version);
- return pci_register_driver(&orinoco_nortel_driver);
-}
-
-static void __exit orinoco_nortel_exit(void)
-{
- pci_unregister_driver(&orinoco_nortel_driver);
-}
-
-module_init(orinoco_nortel_init);
-module_exit(orinoco_nortel_exit);
-
-/*
- * Local variables:
- * c-indent-level: 8
- * c-basic-offset: 8
- * tab-width: 8
- * End:
- */
+++ /dev/null
-/* orinoco_pci.c
- *
- * Driver for Prism 2.5/3 devices that have a direct PCI interface
- * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge).
- * The card contains only one PCI region, which contains all the usual
- * hermes registers, as well as the COR register.
- *
- * Current maintainers are:
- * Pavel Roskin <proski AT gnu.org>
- * and David Gibson <hermes AT gibson.dropbear.id.au>
- *
- * Some of this code is borrowed from orinoco_plx.c
- * Copyright (C) 2001 Daniel Barlow <dan AT telent.net>
- * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
- * has been copied from it. linux-wlan-ng-0.1.10 is originally :
- * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
- * This file originally written by:
- * Copyright (C) 2001 Jean Tourrilhes <jt AT hpl.hp.com>
- * And is now maintained by:
- * (C) Copyright David Gibson, IBM Corp. 2002-2003.
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#define DRIVER_NAME "orinoco_pci"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
-#include "orinoco.h"
-#include "orinoco_pci.h"
-
-/* Offset of the COR register of the PCI card */
-#define HERMES_PCI_COR (0x26)
-
-/* Bitmask to reset the card */
-#define HERMES_PCI_COR_MASK (0x0080)
-
-/* Magic timeouts for doing the reset.
- * Those times are straight from wlan-ng, and it is claimed that they
- * are necessary. Alan will kill me. Take your time and grab a coffee. */
-#define HERMES_PCI_COR_ONT (250) /* ms */
-#define HERMES_PCI_COR_OFFT (500) /* ms */
-#define HERMES_PCI_COR_BUSYT (500) /* ms */
-
-/*
- * Do a soft reset of the card using the Configuration Option Register
- * We need this to get going...
- * This is the part of the code that is strongly inspired from wlan-ng
- *
- * Note : This code is done with irq enabled. This mean that many
- * interrupts will occur while we are there. This is why we use the
- * jiffies to regulate time instead of a straight mdelay(). Usually we
- * need only around 245 iteration of the loop to do 250 ms delay.
- *
- * Note bis : Don't try to access HERMES_CMD during the reset phase.
- * It just won't work !
- */
-static int orinoco_pci_cor_reset(struct orinoco_private *priv)
-{
- hermes_t *hw = &priv->hw;
- unsigned long timeout;
- u16 reg;
-
- /* Assert the reset until the card notices */
- hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK);
- mdelay(HERMES_PCI_COR_ONT);
-
- /* Give time for the card to recover from this hard effort */
- hermes_write_regn(hw, PCI_COR, 0x0000);
- mdelay(HERMES_PCI_COR_OFFT);
-
- /* The card is ready when it's no longer busy */
- timeout = jiffies + (HERMES_PCI_COR_BUSYT * HZ / 1000);
- reg = hermes_read_regn(hw, CMD);
- while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
- mdelay(1);
- reg = hermes_read_regn(hw, CMD);
- }
-
- /* Still busy? */
- if (reg & HERMES_CMD_BUSY) {
- printk(KERN_ERR PFX "Busy timeout\n");
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
-static int orinoco_pci_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- int err;
- struct orinoco_private *priv;
- struct orinoco_pci_card *card;
- struct net_device *dev;
- void __iomem *hermes_io;
-
- err = pci_enable_device(pdev);
- if (err) {
- printk(KERN_ERR PFX "Cannot enable PCI device\n");
- return err;
- }
-
- err = pci_request_regions(pdev, DRIVER_NAME);
- if (err) {
- printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
- goto fail_resources;
- }
-
- hermes_io = pci_iomap(pdev, 0, 0);
- if (!hermes_io) {
- printk(KERN_ERR PFX "Cannot remap chipset registers\n");
- err = -EIO;
- goto fail_map_hermes;
- }
-
- /* Allocate network device */
- dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
- orinoco_pci_cor_reset, NULL);
- if (!dev) {
- printk(KERN_ERR PFX "Cannot allocate network device\n");
- err = -ENOMEM;
- goto fail_alloc;
- }
-
- priv = netdev_priv(dev);
- card = priv->card;
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING);
-
- err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
- dev->name, dev);
- if (err) {
- printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
- err = -EBUSY;
- goto fail_irq;
- }
-
- err = orinoco_pci_cor_reset(priv);
- if (err) {
- printk(KERN_ERR PFX "Initial reset failed\n");
- goto fail;
- }
-
- err = register_netdev(dev);
- if (err) {
- printk(KERN_ERR PFX "Cannot register network device\n");
- goto fail;
- }
-
- pci_set_drvdata(pdev, dev);
- printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
- pci_name(pdev));
-
- return 0;
-
- fail:
- free_irq(pdev->irq, dev);
-
- fail_irq:
- pci_set_drvdata(pdev, NULL);
- free_orinocodev(dev);
-
- fail_alloc:
- pci_iounmap(pdev, hermes_io);
-
- fail_map_hermes:
- pci_release_regions(pdev);
-
- fail_resources:
- pci_disable_device(pdev);
-
- return err;
-}
-
-static void __devexit orinoco_pci_remove_one(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = netdev_priv(dev);
-
- unregister_netdev(dev);
- free_irq(pdev->irq, dev);
- pci_set_drvdata(pdev, NULL);
- free_orinocodev(dev);
- pci_iounmap(pdev, priv->hw.iobase);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-}
-
-static struct pci_device_id orinoco_pci_id_table[] = {
- /* Intersil Prism 3 */
- {0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,},
- /* Intersil Prism 2.5 */
- {0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,},
- /* Samsung MagicLAN SWL-2210P */
- {0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID,},
- {0,},
-};
-
-MODULE_DEVICE_TABLE(pci, orinoco_pci_id_table);
-
-static struct pci_driver orinoco_pci_driver = {
- .name = DRIVER_NAME,
- .id_table = orinoco_pci_id_table,
- .probe = orinoco_pci_init_one,
- .remove = __devexit_p(orinoco_pci_remove_one),
- .suspend = orinoco_pci_suspend,
- .resume = orinoco_pci_resume,
-};
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
- " (Pavel Roskin <proski@gnu.org>,"
- " David Gibson <hermes@gibson.dropbear.id.au> &"
- " Jean Tourrilhes <jt@hpl.hp.com>)";
-MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>");
-MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static int __init orinoco_pci_init(void)
-{
- printk(KERN_DEBUG "%s\n", version);
- return pci_register_driver(&orinoco_pci_driver);
-}
-
-static void __exit orinoco_pci_exit(void)
-{
- pci_unregister_driver(&orinoco_pci_driver);
-}
-
-module_init(orinoco_pci_init);
-module_exit(orinoco_pci_exit);
-
-/*
- * Local variables:
- * c-indent-level: 8
- * c-basic-offset: 8
- * tab-width: 8
- * End:
- */
+++ /dev/null
-/* orinoco_pci.h
- *
- * Common code for all Orinoco drivers for PCI devices, including
- * both native PCI and PCMCIA-to-PCI bridges.
- *
- * Copyright (C) 2005, Pavel Roskin.
- * See orinoco.c for license.
- */
-
-#ifndef _ORINOCO_PCI_H
-#define _ORINOCO_PCI_H
-
-#include <linux/netdevice.h>
-
-/* Driver specific data */
-struct orinoco_pci_card {
- void __iomem *bridge_io;
- void __iomem *attr_io;
-};
-
-#ifdef CONFIG_PM
-static int orinoco_pci_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
- int err;
-
- err = orinoco_lock(priv, &flags);
- if (err) {
- printk(KERN_ERR "%s: cannot lock hardware for suspend\n",
- dev->name);
- return err;
- }
-
- err = __orinoco_down(dev);
- if (err)
- printk(KERN_WARNING "%s: error %d bringing interface down "
- "for suspend\n", dev->name, err);
-
- netif_device_detach(dev);
-
- priv->hw_unavailable++;
-
- orinoco_unlock(priv, &flags);
-
- free_irq(pdev->irq, dev);
- pci_save_state(pdev);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
-
- return 0;
-}
-
-static int orinoco_pci_resume(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
- int err;
-
- pci_set_power_state(pdev, 0);
- err = pci_enable_device(pdev);
- if (err) {
- printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
- dev->name);
- return err;
- }
- pci_restore_state(pdev);
-
- err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
- dev->name, dev);
- if (err) {
- printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n",
- dev->name);
- pci_disable_device(pdev);
- return -EBUSY;
- }
-
- err = orinoco_reinit_firmware(dev);
- if (err) {
- printk(KERN_ERR "%s: error %d re-initializing firmware "
- "on resume\n", dev->name, err);
- return err;
- }
-
- spin_lock_irqsave(&priv->lock, flags);
-
- netif_device_attach(dev);
-
- priv->hw_unavailable--;
-
- if (priv->open && (! priv->hw_unavailable)) {
- err = __orinoco_up(dev);
- if (err)
- printk(KERN_ERR "%s: Error %d restarting card on resume\n",
- dev->name, err);
- }
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- return 0;
-}
-#else
-#define orinoco_pci_suspend NULL
-#define orinoco_pci_resume NULL
-#endif
-
-#endif /* _ORINOCO_PCI_H */
+++ /dev/null
-/* orinoco_plx.c
- *
- * Driver for Prism II devices which would usually be driven by orinoco_cs,
- * but are connected to the PCI bus by a PLX9052.
- *
- * Current maintainers are:
- * Pavel Roskin <proski AT gnu.org>
- * and David Gibson <hermes AT gibson.dropbear.id.au>
- *
- * (C) Copyright David Gibson, IBM Corp. 2001-2003.
- * Copyright (C) 2001 Daniel Barlow
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- *
- * Here's the general details on how the PLX9052 adapter works:
- *
- * - Two PCI I/O address spaces, one 0x80 long which contains the
- * PLX9052 registers, and one that's 0x40 long mapped to the PCMCIA
- * slot I/O address space.
- *
- * - One PCI memory address space, mapped to the PCMCIA attribute space
- * (containing the CIS).
- *
- * Using the later, you can read through the CIS data to make sure the
- * card is compatible with the driver. Keep in mind that the PCMCIA
- * spec specifies the CIS as the lower 8 bits of each word read from
- * the CIS, so to read the bytes of the CIS, read every other byte
- * (0,2,4,...). Passing that test, you need to enable the I/O address
- * space on the PCMCIA card via the PCMCIA COR register. This is the
- * first byte following the CIS. In my case (which may not have any
- * relation to what's on the PRISM2 cards), COR was at offset 0x800
- * within the PCI memory space. Write 0x41 to the COR register to
- * enable I/O mode and to select level triggered interrupts. To
- * confirm you actually succeeded, read the COR register back and make
- * sure it actually got set to 0x41, in case you have an unexpected
- * card inserted.
- *
- * Following that, you can treat the second PCI I/O address space (the
- * one that's not 0x80 in length) as the PCMCIA I/O space.
- *
- * Note that in the Eumitcom's source for their drivers, they register
- * the interrupt as edge triggered when registering it with the
- * Windows kernel. I don't recall how to register edge triggered on
- * Linux (if it can be done at all). But in some experimentation, I
- * don't see much operational difference between using either
- * interrupt mode. Don't mess with the interrupt mode in the COR
- * register though, as the PLX9052 wants level triggers with the way
- * the serial EEPROM configures it on the WL11000.
- *
- * There's some other little quirks related to timing that I bumped
- * into, but I don't recall right now. Also, there's two variants of
- * the WL11000 I've seen, revision A1 and T2. These seem to differ
- * slightly in the timings configured in the wait-state generator in
- * the PLX9052. There have also been some comments from Eumitcom that
- * cards shouldn't be hot swapped, apparently due to risk of cooking
- * the PLX9052. I'm unsure why they believe this, as I can't see
- * anything in the design that would really cause a problem, except
- * for crashing drivers not written to expect it. And having developed
- * drivers for the WL11000, I'd say it's quite tricky to write code
- * that will successfully deal with a hot unplug. Very odd things
- * happen on the I/O side of things. But anyway, be warned. Despite
- * that, I've hot-swapped a number of times during debugging and
- * driver development for various reasons (stuck WAIT# line after the
- * radio card's firmware locks up).
- */
-
-#define DRIVER_NAME "orinoco_plx"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <pcmcia/cisreg.h>
-
-#include "orinoco.h"
-#include "orinoco_pci.h"
-
-#define COR_OFFSET (0x3e0) /* COR attribute offset of Prism2 PC card */
-#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
-#define COR_RESET (0x80) /* reset bit in the COR register */
-#define PLX_RESET_TIME (500) /* milliseconds */
-
-#define PLX_INTCSR 0x4c /* Interrupt Control & Status Register */
-#define PLX_INTCSR_INTEN (1<<6) /* Interrupt Enable bit */
-
-/*
- * Do a soft reset of the card using the Configuration Option Register
- */
-static int orinoco_plx_cor_reset(struct orinoco_private *priv)
-{
- hermes_t *hw = &priv->hw;
- struct orinoco_pci_card *card = priv->card;
- unsigned long timeout;
- u16 reg;
-
- iowrite8(COR_VALUE | COR_RESET, card->attr_io + COR_OFFSET);
- mdelay(1);
-
- iowrite8(COR_VALUE, card->attr_io + COR_OFFSET);
- mdelay(1);
-
- /* Just in case, wait more until the card is no longer busy */
- timeout = jiffies + (PLX_RESET_TIME * HZ / 1000);
- reg = hermes_read_regn(hw, CMD);
- while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
- mdelay(1);
- reg = hermes_read_regn(hw, CMD);
- }
-
- /* Still busy? */
- if (reg & HERMES_CMD_BUSY) {
- printk(KERN_ERR PFX "Busy timeout\n");
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
-static int orinoco_plx_hw_init(struct orinoco_pci_card *card)
-{
- int i;
- u32 csr_reg;
- static const u8 cis_magic[] = {
- 0x01, 0x03, 0x00, 0x00, 0xff, 0x17, 0x04, 0x67
- };
-
- printk(KERN_DEBUG PFX "CIS: ");
- for (i = 0; i < 16; i++) {
- printk("%02X:", ioread8(card->attr_io + (i << 1)));
- }
- printk("\n");
-
- /* Verify whether a supported PC card is present */
- /* FIXME: we probably need to be smarted about this */
- for (i = 0; i < sizeof(cis_magic); i++) {
- if (cis_magic[i] != ioread8(card->attr_io + (i << 1))) {
- printk(KERN_ERR PFX "The CIS value of Prism2 PC "
- "card is unexpected\n");
- return -ENODEV;
- }
- }
-
- /* bjoern: We need to tell the card to enable interrupts, in
- case the serial eprom didn't do this already. See the
- PLX9052 data book, p8-1 and 8-24 for reference. */
- csr_reg = ioread32(card->bridge_io + PLX_INTCSR);
- if (!(csr_reg & PLX_INTCSR_INTEN)) {
- csr_reg |= PLX_INTCSR_INTEN;
- iowrite32(csr_reg, card->bridge_io + PLX_INTCSR);
- csr_reg = ioread32(card->bridge_io + PLX_INTCSR);
- if (!(csr_reg & PLX_INTCSR_INTEN)) {
- printk(KERN_ERR PFX "Cannot enable interrupts\n");
- return -EIO;
- }
- }
-
- return 0;
-}
-
-static int orinoco_plx_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- int err;
- struct orinoco_private *priv;
- struct orinoco_pci_card *card;
- struct net_device *dev;
- void __iomem *hermes_io, *attr_io, *bridge_io;
-
- err = pci_enable_device(pdev);
- if (err) {
- printk(KERN_ERR PFX "Cannot enable PCI device\n");
- return err;
- }
-
- err = pci_request_regions(pdev, DRIVER_NAME);
- if (err) {
- printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
- goto fail_resources;
- }
-
- bridge_io = pci_iomap(pdev, 1, 0);
- if (!bridge_io) {
- printk(KERN_ERR PFX "Cannot map bridge registers\n");
- err = -EIO;
- goto fail_map_bridge;
- }
-
- attr_io = pci_iomap(pdev, 2, 0);
- if (!attr_io) {
- printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n");
- err = -EIO;
- goto fail_map_attr;
- }
-
- hermes_io = pci_iomap(pdev, 3, 0);
- if (!hermes_io) {
- printk(KERN_ERR PFX "Cannot map chipset registers\n");
- err = -EIO;
- goto fail_map_hermes;
- }
-
- /* Allocate network device */
- dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
- orinoco_plx_cor_reset, NULL);
- if (!dev) {
- printk(KERN_ERR PFX "Cannot allocate network device\n");
- err = -ENOMEM;
- goto fail_alloc;
- }
-
- priv = netdev_priv(dev);
- card = priv->card;
- card->bridge_io = bridge_io;
- card->attr_io = attr_io;
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
-
- err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
- dev->name, dev);
- if (err) {
- printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
- err = -EBUSY;
- goto fail_irq;
- }
-
- err = orinoco_plx_hw_init(card);
- if (err) {
- printk(KERN_ERR PFX "Hardware initialization failed\n");
- goto fail;
- }
-
- err = orinoco_plx_cor_reset(priv);
- if (err) {
- printk(KERN_ERR PFX "Initial reset failed\n");
- goto fail;
- }
-
- err = register_netdev(dev);
- if (err) {
- printk(KERN_ERR PFX "Cannot register network device\n");
- goto fail;
- }
-
- pci_set_drvdata(pdev, dev);
- printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
- pci_name(pdev));
-
- return 0;
-
- fail:
- free_irq(pdev->irq, dev);
-
- fail_irq:
- pci_set_drvdata(pdev, NULL);
- free_orinocodev(dev);
-
- fail_alloc:
- pci_iounmap(pdev, hermes_io);
-
- fail_map_hermes:
- pci_iounmap(pdev, attr_io);
-
- fail_map_attr:
- pci_iounmap(pdev, bridge_io);
-
- fail_map_bridge:
- pci_release_regions(pdev);
-
- fail_resources:
- pci_disable_device(pdev);
-
- return err;
-}
-
-static void __devexit orinoco_plx_remove_one(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = netdev_priv(dev);
- struct orinoco_pci_card *card = priv->card;
-
- unregister_netdev(dev);
- free_irq(pdev->irq, dev);
- pci_set_drvdata(pdev, NULL);
- free_orinocodev(dev);
- pci_iounmap(pdev, priv->hw.iobase);
- pci_iounmap(pdev, card->attr_io);
- pci_iounmap(pdev, card->bridge_io);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-}
-
-static struct pci_device_id orinoco_plx_id_table[] = {
- {0x111a, 0x1023, PCI_ANY_ID, PCI_ANY_ID,}, /* Siemens SpeedStream SS1023 */
- {0x1385, 0x4100, PCI_ANY_ID, PCI_ANY_ID,}, /* Netgear MA301 */
- {0x15e8, 0x0130, PCI_ANY_ID, PCI_ANY_ID,}, /* Correga - does this work? */
- {0x1638, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* SMC EZConnect SMC2602W,
- Eumitcom PCI WL11000,
- Addtron AWA-100 */
- {0x16ab, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* Global Sun Tech GL24110P */
- {0x16ab, 0x1101, PCI_ANY_ID, PCI_ANY_ID,}, /* Reported working, but unknown */
- {0x16ab, 0x1102, PCI_ANY_ID, PCI_ANY_ID,}, /* Linksys WDT11 */
- {0x16ec, 0x3685, PCI_ANY_ID, PCI_ANY_ID,}, /* USR 2415 */
- {0xec80, 0xec00, PCI_ANY_ID, PCI_ANY_ID,}, /* Belkin F5D6000 tested by
- Brendan W. McAdams <rit AT jacked-in.org> */
- {0x10b7, 0x7770, PCI_ANY_ID, PCI_ANY_ID,}, /* 3Com AirConnect PCI tested by
- Damien Persohn <damien AT persohn.net> */
- {0,},
-};
-
-MODULE_DEVICE_TABLE(pci, orinoco_plx_id_table);
-
-static struct pci_driver orinoco_plx_driver = {
- .name = DRIVER_NAME,
- .id_table = orinoco_plx_id_table,
- .probe = orinoco_plx_init_one,
- .remove = __devexit_p(orinoco_plx_remove_one),
- .suspend = orinoco_pci_suspend,
- .resume = orinoco_pci_resume,
-};
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
- " (Pavel Roskin <proski@gnu.org>,"
- " David Gibson <hermes@gibson.dropbear.id.au>,"
- " Daniel Barlow <dan@telent.net>)";
-MODULE_AUTHOR("Daniel Barlow <dan@telent.net>");
-MODULE_DESCRIPTION("Driver for wireless LAN cards using the PLX9052 PCI bridge");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static int __init orinoco_plx_init(void)
-{
- printk(KERN_DEBUG "%s\n", version);
- return pci_register_driver(&orinoco_plx_driver);
-}
-
-static void __exit orinoco_plx_exit(void)
-{
- pci_unregister_driver(&orinoco_plx_driver);
-}
-
-module_init(orinoco_plx_init);
-module_exit(orinoco_plx_exit);
-
-/*
- * Local variables:
- * c-indent-level: 8
- * c-basic-offset: 8
- * tab-width: 8
- * End:
- */
+++ /dev/null
-/* orinoco_tmd.c
- *
- * Driver for Prism II devices which would usually be driven by orinoco_cs,
- * but are connected to the PCI bus by a TMD7160.
- *
- * Copyright (C) 2003 Joerg Dorchain <joerg AT dorchain.net>
- * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- *
- * The actual driving is done by orinoco.c, this is just resource
- * allocation stuff.
- *
- * This driver is modeled after the orinoco_plx driver. The main
- * difference is that the TMD chip has only IO port ranges and doesn't
- * provide access to the PCMCIA attribute space.
- *
- * Pheecom sells cards with the TMD chip as "ASIC version"
- */
-
-#define DRIVER_NAME "orinoco_tmd"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <pcmcia/cisreg.h>
-
-#include "orinoco.h"
-#include "orinoco_pci.h"
-
-#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
-#define COR_RESET (0x80) /* reset bit in the COR register */
-#define TMD_RESET_TIME (500) /* milliseconds */
-
-/*
- * Do a soft reset of the card using the Configuration Option Register
- */
-static int orinoco_tmd_cor_reset(struct orinoco_private *priv)
-{
- hermes_t *hw = &priv->hw;
- struct orinoco_pci_card *card = priv->card;
- unsigned long timeout;
- u16 reg;
-
- iowrite8(COR_VALUE | COR_RESET, card->bridge_io);
- mdelay(1);
-
- iowrite8(COR_VALUE, card->bridge_io);
- mdelay(1);
-
- /* Just in case, wait more until the card is no longer busy */
- timeout = jiffies + (TMD_RESET_TIME * HZ / 1000);
- reg = hermes_read_regn(hw, CMD);
- while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
- mdelay(1);
- reg = hermes_read_regn(hw, CMD);
- }
-
- /* Still busy? */
- if (reg & HERMES_CMD_BUSY) {
- printk(KERN_ERR PFX "Busy timeout\n");
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
-
-static int orinoco_tmd_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- int err;
- struct orinoco_private *priv;
- struct orinoco_pci_card *card;
- struct net_device *dev;
- void __iomem *hermes_io, *bridge_io;
-
- err = pci_enable_device(pdev);
- if (err) {
- printk(KERN_ERR PFX "Cannot enable PCI device\n");
- return err;
- }
-
- err = pci_request_regions(pdev, DRIVER_NAME);
- if (err) {
- printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
- goto fail_resources;
- }
-
- bridge_io = pci_iomap(pdev, 1, 0);
- if (!bridge_io) {
- printk(KERN_ERR PFX "Cannot map bridge registers\n");
- err = -EIO;
- goto fail_map_bridge;
- }
-
- hermes_io = pci_iomap(pdev, 2, 0);
- if (!hermes_io) {
- printk(KERN_ERR PFX "Cannot map chipset registers\n");
- err = -EIO;
- goto fail_map_hermes;
- }
-
- /* Allocate network device */
- dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
- orinoco_tmd_cor_reset, NULL);
- if (!dev) {
- printk(KERN_ERR PFX "Cannot allocate network device\n");
- err = -ENOMEM;
- goto fail_alloc;
- }
-
- priv = netdev_priv(dev);
- card = priv->card;
- card->bridge_io = bridge_io;
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
-
- err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
- dev->name, dev);
- if (err) {
- printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
- err = -EBUSY;
- goto fail_irq;
- }
-
- err = orinoco_tmd_cor_reset(priv);
- if (err) {
- printk(KERN_ERR PFX "Initial reset failed\n");
- goto fail;
- }
-
- err = register_netdev(dev);
- if (err) {
- printk(KERN_ERR PFX "Cannot register network device\n");
- goto fail;
- }
-
- pci_set_drvdata(pdev, dev);
- printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
- pci_name(pdev));
-
- return 0;
-
- fail:
- free_irq(pdev->irq, dev);
-
- fail_irq:
- pci_set_drvdata(pdev, NULL);
- free_orinocodev(dev);
-
- fail_alloc:
- pci_iounmap(pdev, hermes_io);
-
- fail_map_hermes:
- pci_iounmap(pdev, bridge_io);
-
- fail_map_bridge:
- pci_release_regions(pdev);
-
- fail_resources:
- pci_disable_device(pdev);
-
- return err;
-}
-
-static void __devexit orinoco_tmd_remove_one(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = netdev_priv(dev);
- struct orinoco_pci_card *card = priv->card;
-
- unregister_netdev(dev);
- free_irq(pdev->irq, dev);
- pci_set_drvdata(pdev, NULL);
- free_orinocodev(dev);
- pci_iounmap(pdev, priv->hw.iobase);
- pci_iounmap(pdev, card->bridge_io);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-}
-
-static struct pci_device_id orinoco_tmd_id_table[] = {
- {0x15e8, 0x0131, PCI_ANY_ID, PCI_ANY_ID,}, /* NDC and OEMs, e.g. pheecom */
- {0,},
-};
-
-MODULE_DEVICE_TABLE(pci, orinoco_tmd_id_table);
-
-static struct pci_driver orinoco_tmd_driver = {
- .name = DRIVER_NAME,
- .id_table = orinoco_tmd_id_table,
- .probe = orinoco_tmd_init_one,
- .remove = __devexit_p(orinoco_tmd_remove_one),
- .suspend = orinoco_pci_suspend,
- .resume = orinoco_pci_resume,
-};
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
- " (Joerg Dorchain <joerg@dorchain.net>)";
-MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
-MODULE_DESCRIPTION("Driver for wireless LAN cards using the TMD7160 PCI bridge");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static int __init orinoco_tmd_init(void)
-{
- printk(KERN_DEBUG "%s\n", version);
- return pci_register_driver(&orinoco_tmd_driver);
-}
-
-static void __exit orinoco_tmd_exit(void)
-{
- pci_unregister_driver(&orinoco_tmd_driver);
-}
-
-module_init(orinoco_tmd_init);
-module_exit(orinoco_tmd_exit);
-
-/*
- * Local variables:
- * c-indent-level: 8
- * c-basic-offset: 8
- * tab-width: 8
- * End:
- */
+++ /dev/null
-/*
- * Driver for 802.11b cards using RAM-loadable Symbol firmware, such as
- * Symbol Wireless Networker LA4137, CompactFlash cards by Socket
- * Communications and Intel PRO/Wireless 2011B.
- *
- * The driver implements Symbol firmware download. The rest is handled
- * in hermes.c and orinoco.c.
- *
- * Utilities for downloading the Symbol firmware are available at
- * http://sourceforge.net/projects/orinoco/
- *
- * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org>
- * Portions based on orinoco_cs.c:
- * Copyright (C) David Gibson, Linuxcare Australia
- * Portions based on Spectrum24tDnld.c from original spectrum24 driver:
- * Copyright (C) Symbol Technologies.
- *
- * See copyright notice in file orinoco.c.
- */
-
-#define DRIVER_NAME "spectrum_cs"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-
-#include "orinoco.h"
-
-/********************************************************************/
-/* Module stuff */
-/********************************************************************/
-
-MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>");
-MODULE_DESCRIPTION("Driver for Symbol Spectrum24 Trilogy cards with firmware downloader");
-MODULE_LICENSE("Dual MPL/GPL");
-
-/* Module parameters */
-
-/* Some D-Link cards have buggy CIS. They do work at 5v properly, but
- * don't have any CIS entry for it. This workaround it... */
-static int ignore_cis_vcc; /* = 0 */
-module_param(ignore_cis_vcc, int, 0);
-MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
-
-/********************************************************************/
-/* Data structures */
-/********************************************************************/
-
-/* PCMCIA specific device information (goes in the card field of
- * struct orinoco_private */
-struct orinoco_pccard {
- struct pcmcia_device *p_dev;
- dev_node_t node;
-};
-
-/********************************************************************/
-/* Function prototypes */
-/********************************************************************/
-
-static int spectrum_cs_config(struct pcmcia_device *link);
-static void spectrum_cs_release(struct pcmcia_device *link);
-
-/* Constants for the CISREG_CCSR register */
-#define HCR_RUN 0x07 /* run firmware after reset */
-#define HCR_IDLE 0x0E /* don't run firmware after reset */
-#define HCR_MEM16 0x10 /* memory width bit, should be preserved */
-
-
-#define CS_CHECK(fn, ret) \
- do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
-/*
- * Reset the card using configuration registers COR and CCSR.
- * If IDLE is 1, stop the firmware, so that it can be safely rewritten.
- */
-static int
-spectrum_reset(struct pcmcia_device *link, int idle)
-{
- int last_ret, last_fn;
- conf_reg_t reg;
- u_int save_cor;
-
- /* Doing it if hardware is gone is guaranteed crash */
- if (!pcmcia_dev_present(link))
- return -ENODEV;
-
- /* Save original COR value */
- reg.Function = 0;
- reg.Action = CS_READ;
- reg.Offset = CISREG_COR;
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
- save_cor = reg.Value;
-
- /* Soft-Reset card */
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- reg.Value = (save_cor | COR_SOFT_RESET);
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
- udelay(1000);
-
- /* Read CCSR */
- reg.Action = CS_READ;
- reg.Offset = CISREG_CCSR;
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
-
- /*
- * Start or stop the firmware. Memory width bit should be
- * preserved from the value we've just read.
- */
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_CCSR;
- reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16);
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
- udelay(1000);
-
- /* Restore original COR configuration index */
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- reg.Value = (save_cor & ~COR_SOFT_RESET);
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
- udelay(1000);
- return 0;
-
- cs_failed:
- cs_error(link, last_fn, last_ret);
- return -ENODEV;
-}
-
-/********************************************************************/
-/* Device methods */
-/********************************************************************/
-
-static int
-spectrum_cs_hard_reset(struct orinoco_private *priv)
-{
- struct orinoco_pccard *card = priv->card;
- struct pcmcia_device *link = card->p_dev;
-
- /* Soft reset using COR and HCR */
- spectrum_reset(link, 0);
-
- return 0;
-}
-
-static int
-spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle)
-{
- struct orinoco_pccard *card = priv->card;
- struct pcmcia_device *link = card->p_dev;
-
- return spectrum_reset(link, idle);
-}
-
-/********************************************************************/
-/* PCMCIA stuff */
-/********************************************************************/
-
-/*
- * This creates an "instance" of the driver, allocating local data
- * structures for one device. The device is registered with Card
- * Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a card
- * insertion event. */
-static int
-spectrum_cs_probe(struct pcmcia_device *link)
-{
- struct net_device *dev;
- struct orinoco_private *priv;
- struct orinoco_pccard *card;
-
- dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
- spectrum_cs_hard_reset,
- spectrum_cs_stop_firmware);
- if (! dev)
- return -ENOMEM;
- priv = netdev_priv(dev);
- card = priv->card;
-
- /* Link both structures together */
- card->p_dev = link;
- link->priv = dev;
-
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
- link->irq.IRQInfo1 = IRQ_LEVEL_ID;
- link->irq.Handler = orinoco_interrupt;
- link->irq.Instance = dev;
-
- /* General socket configuration defaults can go here. In this
- * client, we assume very little, and rely on the CIS for
- * almost everything. In most clients, many details (i.e.,
- * number, sizes, and attributes of IO windows) are fixed by
- * the nature of the device, and can be hard-wired here. */
- link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
-
- return spectrum_cs_config(link);
-} /* spectrum_cs_attach */
-
-/*
- * This deletes a driver "instance". The device is de-registered with
- * Card Services. If it has been released, all local data structures
- * are freed. Otherwise, the structures will be freed when the device
- * is released.
- */
-static void spectrum_cs_detach(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- if (link->dev_node)
- unregister_netdev(dev);
-
- spectrum_cs_release(link);
-
- free_orinocodev(dev);
-} /* spectrum_cs_detach */
-
-/*
- * spectrum_cs_config() is scheduled to run after a CARD_INSERTION
- * event is received, to configure the PCMCIA socket, and to make the
- * device available to the system.
- */
-
-static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cfg,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
- void *priv_data)
-{
- if (cfg->index == 0)
- goto next_entry;
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
- if (!ignore_cis_vcc)
- goto next_entry;
- }
- } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
- if (!ignore_cis_vcc)
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- p_dev->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
- p_dev->conf.Vpp =
- dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- /* Do we need to allocate an interrupt? */
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
- }
-
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
- goto next_entry;
- }
- return 0;
-
-next_entry:
- pcmcia_disable_device(p_dev);
- return -ENODEV;
-};
-
-static int
-spectrum_cs_config(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- struct orinoco_private *priv = netdev_priv(dev);
- struct orinoco_pccard *card = priv->card;
- hermes_t *hw = &priv->hw;
- int last_fn, last_ret;
- void __iomem *mem;
-
- /*
- * In this loop, we scan the CIS for configuration table
- * entries, each of which describes a valid card
- * configuration, including voltage, IO window, memory window,
- * and interrupt settings.
- *
- * We make no assumptions about the card to be configured: we
- * use just the information available in the CIS. In an ideal
- * world, this would work for any PCMCIA card, but it requires
- * a complete and accurate CIS. In practice, a driver usually
- * "knows" most of these things without consulting the CIS,
- * and most client drivers will only use the CIS to fill in
- * implementation-defined details.
- */
- last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
- if (last_ret) {
- if (!ignore_cis_vcc)
- printk(KERN_ERR PFX "GetNextTuple(): No matching "
- "CIS configuration. Maybe you need the "
- "ignore_cis_vcc=1 parameter.\n");
- cs_error(link, RequestIO, last_ret);
- goto failed;
- }
-
- /*
- * Allocate an interrupt line. Note that this does not assign
- * a handler to the interrupt, unless the 'Handler' member of
- * the irq structure is initialized.
- */
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-
- /* We initialize the hermes structure before completing PCMCIA
- * configuration just in case the interrupt handler gets
- * called. */
- mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
- if (!mem)
- goto cs_failed;
-
- hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
-
- /*
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping, and putting the
- * card and host interface into "Memory and IO" mode.
- */
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
-
- /* Ok, we have the configuration, prepare to register the netdev */
- dev->base_addr = link->io.BasePort1;
- dev->irq = link->irq.AssignedIRQ;
- card->node.major = card->node.minor = 0;
-
- /* Reset card */
- if (spectrum_cs_hard_reset(priv) != 0) {
- goto failed;
- }
-
- SET_NETDEV_DEV(dev, &handle_to_dev(link));
- /* Tell the stack we exist */
- if (register_netdev(dev) != 0) {
- printk(KERN_ERR PFX "register_netdev() failed\n");
- goto failed;
- }
-
- /* At this point, the dev_node_t structure(s) needs to be
- * initialized and arranged in a linked list at link->dev_node. */
- strcpy(card->node.dev_name, dev->name);
- link->dev_node = &card->node; /* link->dev_node being non-NULL is also
- used to indicate that the
- net_device has been registered */
-
- /* Finally, report what we've done */
- printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
- "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
- link->irq.AssignedIRQ, link->io.BasePort1,
- link->io.BasePort1 + link->io.NumPorts1 - 1);
-
- return 0;
-
- cs_failed:
- cs_error(link, last_fn, last_ret);
-
- failed:
- spectrum_cs_release(link);
- return -ENODEV;
-} /* spectrum_cs_config */
-
-/*
- * After a card is removed, spectrum_cs_release() will unregister the
- * device, and release the PCMCIA configuration. If the device is
- * still open, this will be postponed until it is closed.
- */
-static void
-spectrum_cs_release(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
-
- /* We're committed to taking the device away now, so mark the
- * hardware as unavailable */
- spin_lock_irqsave(&priv->lock, flags);
- priv->hw_unavailable++;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- pcmcia_disable_device(link);
- if (priv->hw.iobase)
- ioport_unmap(priv->hw.iobase);
-} /* spectrum_cs_release */
-
-
-static int
-spectrum_cs_suspend(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
- int err = 0;
-
- /* Mark the device as stopped, to block IO until later */
- spin_lock_irqsave(&priv->lock, flags);
-
- err = __orinoco_down(dev);
- if (err)
- printk(KERN_WARNING "%s: Error %d downing interface\n",
- dev->name, err);
-
- netif_device_detach(dev);
- priv->hw_unavailable++;
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- return err;
-}
-
-static int
-spectrum_cs_resume(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- struct orinoco_private *priv = netdev_priv(dev);
-
- netif_device_attach(dev);
- priv->hw_unavailable--;
- schedule_work(&priv->reset_work);
-
- return 0;
-}
-
-
-/********************************************************************/
-/* Module initialization */
-/********************************************************************/
-
-/* Can't be declared "const" or the whole __initdata section will
- * become const */
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
- " (Pavel Roskin <proski@gnu.org>,"
- " David Gibson <hermes@gibson.dropbear.id.au>, et al)";
-
-static struct pcmcia_device_id spectrum_cs_ids[] = {
- PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */
- PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */
- PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless LAN PC Card", 0x816cc815, 0x6fbf459a), /* 2011B, not 2011 */
- PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids);
-
-static struct pcmcia_driver orinoco_driver = {
- .owner = THIS_MODULE,
- .drv = {
- .name = DRIVER_NAME,
- },
- .probe = spectrum_cs_probe,
- .remove = spectrum_cs_detach,
- .suspend = spectrum_cs_suspend,
- .resume = spectrum_cs_resume,
- .id_table = spectrum_cs_ids,
-};
-
-static int __init
-init_spectrum_cs(void)
-{
- printk(KERN_DEBUG "%s\n", version);
-
- return pcmcia_register_driver(&orinoco_driver);
-}
-
-static void __exit
-exit_spectrum_cs(void)
-{
- pcmcia_unregister_driver(&orinoco_driver);
-}
-
-module_init(init_spectrum_cs);
-module_exit(exit_spectrum_cs);
projects / firefly-linux-kernel-4.4.55.git / commitdiff