ath5k: Increase PHY settling parameters for turo mode
authorNick Kossifidis <mickflemm@gmail.com>
Tue, 23 Nov 2010 19:04:43 +0000 (21:04 +0200)
committerJohn W. Linville <linville@tuxdriver.com>
Tue, 30 Nov 2010 18:52:34 +0000 (13:52 -0500)
 * On turbo mode increase PHY settling times, note that
 we only increase switch settling time on AR5212 as indicated
 by initvals.

 * A few cleanups: Move frame control settings for AR5210 from
 reset_tx_queue to tweak_initvals and remove phy_scal settings
 from tweak_initvals (we tweak them alread on set_sleep_clock).

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath/ath5k/ath5k.h
drivers/net/wireless/ath/ath5k/qcu.c
drivers/net/wireless/ath/ath5k/reg.h
drivers/net/wireless/ath/ath5k/reset.c

index c9535447a8ab62245a3b47ec8ea53ce4569c40f7..005cad025170a035755b44e987ca55b869ef6c1c 100644 (file)
 #define        AR5K_INIT_TX_LAT_BG                     384
 /* Tx latency for 40MHz (turbo) operation (min ?) */
 #define        AR5K_INIT_TX_LAT_MIN                    32
+/* Default Tx/Rx latencies (same for 5211)*/
+#define AR5K_INIT_TX_LATENCY_5210              54
+#define        AR5K_INIT_RX_LATENCY_5210               29
 
 /* Tx frame to Tx data start delay */
 #define AR5K_INIT_TXF2TXD_START_DEFAULT                14
 #define AR5K_INIT_TXF2TXD_START_DELAY_10MHZ    12
 #define AR5K_INIT_TXF2TXD_START_DELAY_5MHZ     13
 
-/* Default Tx/Rx latencies (same for 5211)*/
-#define AR5K_INIT_TX_LATENCY_5210              54
-#define        AR5K_INIT_RX_LATENCY_5210               29
+/* We need to increase PHY switch and agc settling time
+ * on turbo mode */
+#define        AR5K_SWITCH_SETTLING                    5760
+#define        AR5K_SWITCH_SETTLING_TURBO              7168
+
+#define        AR5K_AGC_SETTLING                       28
+/* 38 on 5210 but shouldn't matter */
+#define        AR5K_AGC_SETTLING_TURBO                 37
 
 
 /* GENERIC CHIPSET DEFINITIONS */
index f89bc9403f8f319ccc759e8847c42fe63698d918..00c490833ba7d860f882f3826a9eef389275055b 100644 (file)
@@ -271,19 +271,6 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
                ath5k_hw_reg_write(ah, (ah->ah_bwmode == AR5K_BWMODE_40MHZ) ?
                        AR5K_INIT_PROTO_TIME_CNTRL_TURBO :
                        AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1);
-               /* Set AR5K_PHY_SETTLING */
-               ath5k_hw_reg_write(ah, (ah->ah_bwmode == AR5K_BWMODE_40MHZ) ?
-                       (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
-                       | 0x38 :
-                       (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
-                       | 0x1C,
-                       AR5K_PHY_SETTLING);
-               /* Set Frame Control Register */
-               ath5k_hw_reg_write(ah, (ah->ah_bwmode == AR5K_BWMODE_40MHZ) ?
-                       (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE |
-                       AR5K_PHY_TURBO_SHORT | 0x2020) :
-                       (AR5K_PHY_FRAME_CTL_INI | 0x1020),
-                       AR5K_PHY_FRAME_CTL_5210);
        }
 
        /*
index 4d610617af3c70c3f516d31e50bdc3c1e57fb953..dc213bb121e6bd116b71766e29693b11c3277b08 100644 (file)
 #define        AR5K_PHY_FRAME_CTL              (ah->ah_version == AR5K_AR5210 ? \
                                        AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211)
 /*---[5111+]---*/
+#define        AR5K_PHY_FRAME_CTL_WIN_LEN      0x00000003      /* Force window length (?) */
+#define        AR5K_PHY_FRAME_CTL_WIN_LEN_S    0
 #define        AR5K_PHY_FRAME_CTL_TX_CLIP      0x00000038      /* Mask for tx clip (?) */
 #define        AR5K_PHY_FRAME_CTL_TX_CLIP_S    3
 #define        AR5K_PHY_FRAME_CTL_PREP_CHINFO  0x00010000      /* Prepend chan info */
index c9e5bad7cffc00a0fbaf46bdadf0b4de2d84a48e..c871d40b1ad7ca913dcdec4dbaa4c5c6c5766547 100644 (file)
@@ -688,19 +688,6 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
                AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
                                AR5K_TXCFG_DCU_DBL_BUF_DIS);
 
-       /* Set DAC/ADC delays */
-       if (ah->ah_version == AR5K_AR5212) {
-               u32 scal;
-               struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-               if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
-                       scal = AR5K_PHY_SCAL_32MHZ_2417;
-               else if (ee->ee_is_hb63)
-                       scal = AR5K_PHY_SCAL_32MHZ_HB63;
-               else
-                       scal = AR5K_PHY_SCAL_32MHZ;
-               ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);
-       }
-
        /* Set fast ADC */
        if ((ah->ah_radio == AR5K_RF5413) ||
        (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
@@ -740,6 +727,45 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
                AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
                                        AR5K_DIAG_SW_ECO_ENABLE);
        }
+
+       if (ah->ah_bwmode) {
+               /* Increase PHY switch and AGC settling time
+                * on turbo mode (ath5k_hw_commit_eeprom_settings
+                * will override settling time if available) */
+               if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) {
+
+                       AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
+                                               AR5K_PHY_SETTLING_AGC,
+                                               AR5K_AGC_SETTLING_TURBO);
+
+                       /* XXX: Initvals indicate we only increase
+                        * switch time on AR5212, 5211 and 5210
+                        * only change agc time (bug?) */
+                       if (ah->ah_version == AR5K_AR5212)
+                               AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
+                                               AR5K_PHY_SETTLING_SWITCH,
+                                               AR5K_SWITCH_SETTLING_TURBO);
+
+                       if (ah->ah_version == AR5K_AR5210) {
+                               /* Set Frame Control Register */
+                               ath5k_hw_reg_write(ah,
+                                       (AR5K_PHY_FRAME_CTL_INI |
+                                       AR5K_PHY_TURBO_MODE |
+                                       AR5K_PHY_TURBO_SHORT | 0x2020),
+                                       AR5K_PHY_FRAME_CTL_5210);
+                       }
+               /* On 5413 PHY force window length for half/quarter rate*/
+               } else if ((ah->ah_mac_srev >= AR5K_SREV_AR5424) &&
+               (ah->ah_mac_srev <= AR5K_SREV_AR5414)) {
+                       AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL_5211,
+                                               AR5K_PHY_FRAME_CTL_WIN_LEN,
+                                               3);
+               }
+       } else if (ah->ah_version == AR5K_AR5210) {
+               /* Set Frame Control Register for normal operation */
+               ath5k_hw_reg_write(ah, (AR5K_PHY_FRAME_CTL_INI | 0x1020),
+                                               AR5K_PHY_FRAME_CTL_5210);
+       }
 }
 
 static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,