/*
* The Orion has fully programable address map. There's a separate address
- * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB,
+ * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB,
* Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
* address decode windows that allow it to access any of the Orion resources.
*
* CPU address decoding --
* Linux assumes that it is the boot loader that already setup the access to
* DDR and internal registers.
- * Setup access to PCI and PCI-E IO/MEM space is issued by this file.
+ * Setup access to PCI and PCIe IO/MEM space is issued by this file.
* Setup access to various devices located on the device bus interface (e.g.
* flashes, RTC, etc) should be issued by machine-setup.c according to
* specific board population (by using orion5x_setup_*_win()).
****************************************************************************/
/*
- * Identify device ID and rev from PCIE configuration header space '0'.
+ * Identify device ID and rev from PCIe configuration header space '0'.
*/
static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
{
*/
orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
- /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIE
+ /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIe
*
- * Open a special address decode windows for the PCIE WA.
+ * Open a special address decode windows for the PCIe WA.
*/
orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
ORION5X_PCIE_WA_SIZE);
orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE);
/*
- * Open a special address decode windows for the PCIE WA.
+ * Open a special address decode windows for the PCIe WA.
*/
orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
ORION5X_PCIE_WA_SIZE);
orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
/*
- * Open a special address decode windows for the PCIE WA.
+ * Open a special address decode windows for the PCIe WA.
*/
orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
ORION5X_PCIE_WA_SIZE);
QNAP_TS209_NOR_BOOT_SIZE);
/*
- * Open a special address decode windows for the PCIE WA.
+ * Open a special address decode windows for the PCIe WA.
*/
orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
ORION5X_PCIE_WA_SIZE);