ide: remove some obsoleted kernel params (v2)
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sat, 3 Mar 2007 16:48:55 +0000 (17:48 +0100)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sat, 3 Mar 2007 16:48:55 +0000 (17:48 +0100)
Remove

* "hdx=serialize"
* "idex=noautotune"
* "idex=autotune"

kernel params, they have been obsoleted for ages.

"idex=serialize", "hdx=noautotune" and "hdx=autotune" are still available
so there is no funcionality loss caused by this patch.

v2:

* fix CONFIG_BLK_DEV_4DRIVES=y build broken by version 1 of the patch
  [ /me wearing brown paper bag ]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Documentation/ide.txt
drivers/ide/ide.c
drivers/ide/legacy/qd65xx.c
drivers/ide/pci/opti621.c

index 786c3a766995f09ad8ad443c042be0af0a6484f3..82349f5cd3d7552e8e9571e50fe7a6dfc7d8ba5e 100644 (file)
@@ -232,7 +232,9 @@ Summary of ide driver parameters for kernel command line
 
  "hdx=remap63"         : remap the drive: add 63 to all sector numbers
                          (for DM OnTrack)
+
+ "idex=noautotune"     : driver will NOT attempt to tune interface speed
+
  "hdx=autotune"                : driver will attempt to tune interface speed
                          to the fastest PIO mode supported,
                          if possible for this drive only.
@@ -267,17 +269,6 @@ Summary of ide driver parameters for kernel command line
  "idex=base,ctl"       : specify both base and ctl
 
  "idex=base,ctl,irq"   : specify base, ctl, and irq number
- "idex=autotune"       : driver will attempt to tune interface speed
-                         to the fastest PIO mode supported,
-                         for all drives on this interface.
-                         Not fully supported by all chipset types,
-                         and quite likely to cause trouble with
-                         older/odd IDE drives.
-
- "idex=noautotune"     : driver will NOT attempt to tune interface speed 
-                         This is the default for most chipsets,
-                         except the cmd640.
 
  "idex=serialize"      : do not overlap operations on idex. Please note
                          that you will have to specify this option for
index 48a087dfc592ff70d141c136040febb390658a78..ac1a720f182ab0fb2e0607875c4912a936fccaa3 100644 (file)
@@ -1578,7 +1578,7 @@ static int __init ide_setup(char *s)
         */
        if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
                const char *hd_words[] = {
-                       "none", "noprobe", "nowerr", "cdrom", "serialize",
+                       "none", "noprobe", "nowerr", "cdrom", "minus5",
                        "autotune", "noautotune", "minus8", "swapdata", "bswap",
                        "noflush", "remap", "remap63", "scsi", NULL };
                unit = s[2] - 'a';
@@ -1606,9 +1606,6 @@ static int __init ide_setup(char *s)
                                drive->ready_stat = 0;
                                hwif->noprobe = 0;
                                goto done;
-                       case -5: /* "serialize" */
-                               printk(" -- USE \"ide%d=serialize\" INSTEAD", hw);
-                               goto do_serialize;
                        case -6: /* "autotune" */
                                drive->autotune = IDE_TUNE_AUTO;
                                goto obsolete_option;
@@ -1669,7 +1666,7 @@ static int __init ide_setup(char *s)
                 * (-8, -9, -10) are reserved to ease the hardcoding.
                 */
                static const char *ide_words[] = {
-                       "noprobe", "serialize", "autotune", "noautotune", 
+                       "noprobe", "serialize", "minus3", "minus4",
                        "reset", "dma", "ata66", "minus8", "minus9",
                        "minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb",
                        "dtc2278", "umc8672", "ali14xx", NULL };
@@ -1740,12 +1737,17 @@ static int __init ide_setup(char *s)
                                hwif->chipset = mate->chipset = ide_4drives;
                                mate->irq = hwif->irq;
                                memcpy(mate->io_ports, hwif->io_ports, sizeof(hwif->io_ports));
-                               goto do_serialize;
+                               hwif->mate = mate;
+                               mate->mate = hwif;
+                               hwif->serialized = mate->serialized = 1;
+                               goto obsolete_option;
                        }
 #endif /* CONFIG_BLK_DEV_4DRIVES */
                        case -10: /* minus10 */
                        case -9: /* minus9 */
                        case -8: /* minus8 */
+                       case -4:
+                       case -3:
                                goto bad_option;
                        case -7: /* ata66 */
 #ifdef CONFIG_BLK_DEV_IDEPCI
@@ -1760,16 +1762,7 @@ static int __init ide_setup(char *s)
                        case -5: /* "reset" */
                                hwif->reset = 1;
                                goto obsolete_option;
-                       case -4: /* "noautotune" */
-                               hwif->drives[0].autotune = IDE_TUNE_NOAUTO;
-                               hwif->drives[1].autotune = IDE_TUNE_NOAUTO;
-                               goto obsolete_option;
-                       case -3: /* "autotune" */
-                               hwif->drives[0].autotune = IDE_TUNE_AUTO;
-                               hwif->drives[1].autotune = IDE_TUNE_AUTO;
-                               goto obsolete_option;
                        case -2: /* "serialize" */
-                       do_serialize:
                                hwif->mate = &ide_hwifs[hw^1];
                                hwif->mate->mate = hwif;
                                hwif->serialized = hwif->mate->serialized = 1;
index 584e26c96b46a1be3e20e1be9c5406d1861e55f9..ab482c85e41554293e5e95f6b5331fd7b9d45841 100644 (file)
@@ -16,8 +16,8 @@
  * Please set local bus speed using kernel parameter idebus
  *     for example, "idebus=33" stands for 33Mhz VLbus
  * To activate controller support, use "ide0=qd65xx"
- * To enable tuning, use "ide0=autotune"
- * To enable second channel tuning (qd6580 only), use "ide1=autotune"
+ * To enable tuning, use "hda=autotune hdb=autotune"
+ * To enable 2nd channel tuning (qd6580 only), use "hdc=autotune hdd=autotune"
  */
 
 /*
index af9aaafa55b684317069df3744d9dbe0490ecf1e..aede7eee9246fc087daa5c3c1541563a031a4e0f 100644 (file)
@@ -57,7 +57,7 @@
  * There is a 25/33MHz switch in configuration
  * register, but driver is written for use at any frequency which get
  * (use idebus=xx to select PCI bus speed).
- * Use ide0=autotune for automatical tune of the PIO modes.
+ * Use hda=autotune and hdb=autotune for automatical tune of the PIO modes.
  * If you get strange results, do not use this and set PIO manually
  * by hdparm.
  *