Code cleanup. Moved used sections to other source files.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
#include "d11.h"
#include "types.h"
-#include "cfg.h"
#include "scb.h"
#include "pub.h"
#include "key.h"
#include "alloc.h"
#include "rate.h"
-#include "bsscfg.h"
#include "phy/phy_hal.h"
#include "channel.h"
#include "main.h"
#include <d11.h>
#include "types.h"
-#include "cfg.h"
#include "rate.h"
#include "scb.h"
#include "pub.h"
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-#include <cfg.h>
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include "types.h"
#include "pmu.h"
#include "d11.h"
-#include "cfg.h"
#include "rate.h"
#include "scb.h"
#include "pub.h"
+++ /dev/null
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _BRCM_BSSCFG_H_
-#define _BRCM_BSSCFG_H_
-
-/* Check if a particular BSS config is AP or STA */
-#define BSSCFG_AP(cfg) (0)
-#define BSSCFG_STA(cfg) (1)
-
-#define BSSCFG_IBSS(cfg) (!(cfg)->BSS)
-
-#define NTXRATE 64 /* # tx MPDUs rate is reported for */
-#define MAXMACLIST 64 /* max # source MAC matches */
-#define BCN_TEMPLATE_COUNT 2
-
-/* Iterator for "associated" STA bss configs:
- (struct wlc_info *wlc, int idx, struct wlc_bsscfg *cfg) */
-#define FOREACH_AS_STA(wlc, idx, cfg) \
- for (idx = 0; (int) idx < WLC_MAXBSSCFG; idx++) \
- if ((cfg = (wlc)->bsscfg[idx]) && BSSCFG_STA(cfg) && cfg->associated)
-
-/* As above for all non-NULL BSS configs */
-#define FOREACH_BSS(wlc, idx, cfg) \
- for (idx = 0; (int) idx < WLC_MAXBSSCFG; idx++) \
- if ((cfg = (wlc)->bsscfg[idx]))
-
-/* BSS configuration state */
-struct wlc_bsscfg {
- struct wlc_info *wlc; /* wlc to which this bsscfg belongs to. */
- bool up; /* is this configuration up operational */
- bool enable; /* is this configuration enabled */
- bool associated; /* is BSS in ASSOCIATED state */
- bool BSS; /* infraustructure or adhac */
- bool dtim_programmed;
-
- u8 SSID_len; /* the length of SSID */
- u8 SSID[IEEE80211_MAX_SSID_LEN]; /* SSID string */
- struct scb *bcmc_scb[MAXBANDS]; /* one bcmc_scb per band */
- s8 _idx; /* the index of this bsscfg,
- * assigned at wlc_bsscfg_alloc()
- */
- /* MAC filter */
- uint nmac; /* # of entries on maclist array */
- int macmode; /* allow/deny stations on maclist array */
- struct ether_addr *maclist; /* list of source MAC addrs to match */
-
- /* security */
- u32 wsec; /* wireless security bitvec */
- s16 auth; /* 802.11 authentication: Open, Shared Key, WPA */
- s16 openshared; /* try Open auth first, then Shared Key */
- bool wsec_restrict; /* drop unencrypted packets if wsec is enabled */
- bool eap_restrict; /* restrict data until 802.1X auth succeeds */
- u16 WPA_auth; /* WPA: authenticated key management */
- bool wpa2_preauth; /* default is true, wpa_cap sets value */
- bool wsec_portopen; /* indicates keys are plumbed */
- wsec_iv_t wpa_none_txiv; /* global txiv for WPA_NONE, tkip and aes */
- int wsec_index; /* 0-3: default tx key, -1: not set */
- wsec_key_t *bss_def_keys[WLC_DEFAULT_KEYS]; /* default key storage */
-
- /* TKIP countermeasures */
- bool tkip_countermeasures; /* flags TKIP no-assoc period */
- u32 tk_cm_dt; /* detect timer */
- u32 tk_cm_bt; /* blocking timer */
- u32 tk_cm_bt_tmstmp; /* Timestamp when TKIP BT is activated */
- bool tk_cm_activate; /* activate countermeasures after EAPOL-Key sent */
-
- u8 BSSID[ETH_ALEN]; /* BSSID (associated) */
- u8 cur_etheraddr[ETH_ALEN]; /* h/w address */
- u16 bcmc_fid; /* the last BCMC FID queued to TX_BCMC_FIFO */
- u16 bcmc_fid_shm; /* the last BCMC FID written to shared mem */
-
- u32 flags; /* WLC_BSSCFG flags; see below */
-
- u8 *bcn; /* AP beacon */
- uint bcn_len; /* AP beacon length */
- bool ar_disassoc; /* disassociated in associated recreation */
-
- int auth_atmptd; /* auth type (open/shared) attempted */
-
- pmkid_cand_t pmkid_cand[MAXPMKID]; /* PMKID candidate list */
- uint npmkid_cand; /* num PMKID candidates */
- pmkid_t pmkid[MAXPMKID]; /* PMKID cache */
- uint npmkid; /* num cached PMKIDs */
-
- wlc_bss_info_t *current_bss; /* BSS parms in ASSOCIATED state */
-
- /* PM states */
- bool PMawakebcn; /* bcn recvd during current waking state */
- bool PMpending; /* waiting for tx status with PM indicated set */
- bool priorPMstate; /* Detecting PM state transitions */
- bool PSpoll; /* whether there is an outstanding PS-Poll frame */
-
- /* BSSID entry in RCMTA, use the wsec key management infrastructure to
- * manage the RCMTA entries.
- */
- wsec_key_t *rcmta;
-
- /* 'unique' ID of this bsscfg, assigned at bsscfg allocation */
- u16 ID;
-
- uint txrspecidx; /* index into tx rate circular buffer */
- ratespec_t txrspec[NTXRATE][2]; /* circular buffer of prev MPDUs tx rates */
-};
-
-#define WLC_BSSCFG_11N_DISABLE 0x1000 /* Do not advertise .11n IEs for this BSS */
-#define WLC_BSSCFG_HW_BCN 0x20 /* The BSS is generating beacons in HW */
-
-#define HWBCN_ENAB(cfg) (((cfg)->flags & WLC_BSSCFG_HW_BCN) != 0)
-#define HWPRB_ENAB(cfg) (((cfg)->flags & WLC_BSSCFG_HW_PRB) != 0)
-
-/* Extend N_ENAB to per-BSS */
-#define BSS_N_ENAB(wlc, cfg) \
- (N_ENAB((wlc)->pub) && !((cfg)->flags & WLC_BSSCFG_11N_DISABLE))
-
-#define MBSS_BCN_ENAB(cfg) 0
-#define MBSS_PRB_ENAB(cfg) 0
-#define SOFTBCN_ENAB(pub) (0)
-#define SOFTPRB_ENAB(pub) (0)
-#define wlc_bsscfg_tx_check(a) do { } while (0);
-
-#endif /* _BRCM_BSSCFG_H_ */
+++ /dev/null
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _BRCM_CFG_H_
-#define _BRCM_CFG_H_
-
-#define NBANDS(wlc) ((wlc)->pub->_nbands)
-#define NBANDS_PUB(pub) ((pub)->_nbands)
-#define NBANDS_HW(hw) ((hw)->_nbands)
-
-#define IS_SINGLEBAND_5G(device) 0
-
-/* **** Core type/rev defaults **** */
-#define D11_DEFAULT 0x0fffffb0 /* Supported D11 revs: 4, 5, 7-27
- * also need to update wlc.h MAXCOREREV
- */
-
-#define NPHY_DEFAULT 0x000001ff /* Supported nphy revs:
- * 0 4321a0
- * 1 4321a1
- * 2 4321b0/b1/c0/c1
- * 3 4322a0
- * 4 4322a1
- * 5 4716a0
- * 6 43222a0, 43224a0
- * 7 43226a0
- * 8 5357a0, 43236a0
- */
-
-#define LCNPHY_DEFAULT 0x00000007 /* Supported lcnphy revs:
- * 0 4313a0, 4336a0, 4330a0
- * 1
- * 2 4330a0
- */
-
-#define SSLPNPHY_DEFAULT 0x0000000f /* Supported sslpnphy revs:
- * 0 4329a0/k0
- * 1 4329b0/4329C0
- * 2 4319a0
- * 3 5356a0
- */
-
-
-/* For undefined values, use defaults */
-#ifndef D11CONF
-#define D11CONF D11_DEFAULT
-#endif
-#ifndef NCONF
-#define NCONF NPHY_DEFAULT
-#endif
-#ifndef LCNCONF
-#define LCNCONF LCNPHY_DEFAULT
-#endif
-
-#ifndef SSLPNCONF
-#define SSLPNCONF SSLPNPHY_DEFAULT
-#endif
-
-/********************************************************************
- * Phy/Core Configuration. Defines macros to to check core phy/rev *
- * compile-time configuration. Defines default core support. *
- * ******************************************************************
- */
-
-/* Basic macros to check a configuration bitmask */
-
-#define CONF_HAS(config, val) ((config) & (1 << (val)))
-#define CONF_MSK(config, mask) ((config) & (mask))
-#define MSK_RANGE(low, hi) ((1 << ((hi)+1)) - (1 << (low)))
-#define CONF_RANGE(config, low, hi) (CONF_MSK(config, MSK_RANGE(low, high)))
-
-#define CONF_IS(config, val) ((config) == (1 << (val)))
-#define CONF_GE(config, val) ((config) & (0-(1 << (val))))
-#define CONF_GT(config, val) ((config) & (0-2*(1 << (val))))
-#define CONF_LT(config, val) ((config) & ((1 << (val))-1))
-#define CONF_LE(config, val) ((config) & (2*(1 << (val))-1))
-
-/* Wrappers for some of the above, specific to config constants */
-
-#define NCONF_HAS(val) CONF_HAS(NCONF, val)
-#define NCONF_MSK(mask) CONF_MSK(NCONF, mask)
-#define NCONF_IS(val) CONF_IS(NCONF, val)
-#define NCONF_GE(val) CONF_GE(NCONF, val)
-#define NCONF_GT(val) CONF_GT(NCONF, val)
-#define NCONF_LT(val) CONF_LT(NCONF, val)
-#define NCONF_LE(val) CONF_LE(NCONF, val)
-
-#define LCNCONF_HAS(val) CONF_HAS(LCNCONF, val)
-#define LCNCONF_MSK(mask) CONF_MSK(LCNCONF, mask)
-#define LCNCONF_IS(val) CONF_IS(LCNCONF, val)
-#define LCNCONF_GE(val) CONF_GE(LCNCONF, val)
-#define LCNCONF_GT(val) CONF_GT(LCNCONF, val)
-#define LCNCONF_LT(val) CONF_LT(LCNCONF, val)
-#define LCNCONF_LE(val) CONF_LE(LCNCONF, val)
-
-#define D11CONF_HAS(val) CONF_HAS(D11CONF, val)
-#define D11CONF_MSK(mask) CONF_MSK(D11CONF, mask)
-#define D11CONF_IS(val) CONF_IS(D11CONF, val)
-#define D11CONF_GE(val) CONF_GE(D11CONF, val)
-#define D11CONF_GT(val) CONF_GT(D11CONF, val)
-#define D11CONF_LT(val) CONF_LT(D11CONF, val)
-#define D11CONF_LE(val) CONF_LE(D11CONF, val)
-
-#define PHYCONF_HAS(val) CONF_HAS(PHYTYPE, val)
-#define PHYCONF_IS(val) CONF_IS(PHYTYPE, val)
-
-#define NREV_IS(var, val) (NCONF_HAS(val) && (NCONF_IS(val) || ((var) == (val))))
-#define NREV_GE(var, val) (NCONF_GE(val) && (!NCONF_LT(val) || ((var) >= (val))))
-#define NREV_GT(var, val) (NCONF_GT(val) && (!NCONF_LE(val) || ((var) > (val))))
-#define NREV_LT(var, val) (NCONF_LT(val) && (!NCONF_GE(val) || ((var) < (val))))
-#define NREV_LE(var, val) (NCONF_LE(val) && (!NCONF_GT(val) || ((var) <= (val))))
-
-#define LCNREV_IS(var, val) (LCNCONF_HAS(val) && (LCNCONF_IS(val) || ((var) == (val))))
-#define LCNREV_GE(var, val) (LCNCONF_GE(val) && (!LCNCONF_LT(val) || ((var) >= (val))))
-#define LCNREV_GT(var, val) (LCNCONF_GT(val) && (!LCNCONF_LE(val) || ((var) > (val))))
-#define LCNREV_LT(var, val) (LCNCONF_LT(val) && (!LCNCONF_GE(val) || ((var) < (val))))
-#define LCNREV_LE(var, val) (LCNCONF_LE(val) && (!LCNCONF_GT(val) || ((var) <= (val))))
-
-#define D11REV_IS(var, val) (D11CONF_HAS(val) && (D11CONF_IS(val) || ((var) == (val))))
-#define D11REV_GE(var, val) (D11CONF_GE(val) && (!D11CONF_LT(val) || ((var) >= (val))))
-#define D11REV_GT(var, val) (D11CONF_GT(val) && (!D11CONF_LE(val) || ((var) > (val))))
-#define D11REV_LT(var, val) (D11CONF_LT(val) && (!D11CONF_GE(val) || ((var) < (val))))
-#define D11REV_LE(var, val) (D11CONF_LE(val) && (!D11CONF_GT(val) || ((var) <= (val))))
-
-#define PHYTYPE_IS(var, val) (PHYCONF_HAS(val) && (PHYCONF_IS(val) || ((var) == (val))))
-
-/* Finally, early-exit from switch case if anyone wants it... */
-
-#define CASECHECK(config, val) if (!(CONF_HAS(config, val))) break
-#define CASEMSK(config, mask) if (!(CONF_MSK(config, mask))) break
-
-#if (D11CONF ^ (D11CONF & D11_DEFAULT))
-#error "Unsupported MAC revision configured"
-#endif
-#if (NCONF ^ (NCONF & NPHY_DEFAULT))
-#error "Unsupported NPHY revision configured"
-#endif
-#if (LCNCONF ^ (LCNCONF & LCNPHY_DEFAULT))
-#error "Unsupported LPPHY revision configured"
-#endif
-
-/* *** Consistency checks *** */
-#if !D11CONF
-#error "No MAC revisions configured!"
-#endif
-
-#if !NCONF && !LCNCONF && !SSLPNCONF
-#error "No PHY configured!"
-#endif
-
-/* Set up PHYTYPE automatically: (depends on PHY_TYPE_X, from d11.h) */
-
-#define _PHYCONF_N (1 << PHY_TYPE_N)
-
-#if LCNCONF
-#define _PHYCONF_LCN (1 << PHY_TYPE_LCN)
-#else
-#define _PHYCONF_LCN 0
-#endif /* LCNCONF */
-
-#if SSLPNCONF
-#define _PHYCONF_SSLPN (1 << PHY_TYPE_SSN)
-#else
-#define _PHYCONF_SSLPN 0
-#endif /* SSLPNCONF */
-
-#define PHYTYPE (_PHYCONF_N | _PHYCONF_LCN | _PHYCONF_SSLPN)
-
-/* Utility macro to identify 802.11n (HT) capable PHYs */
-#define PHYTYPE_11N_CAP(phytype) \
- (PHYTYPE_IS(phytype, PHY_TYPE_N) || \
- PHYTYPE_IS(phytype, PHY_TYPE_LCN) || \
- PHYTYPE_IS(phytype, PHY_TYPE_SSN))
-
-/* Last but not least: shorter wlc-specific var checks */
-#define WLCISNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_N)
-#define WLCISLCNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_LCN)
-#define WLCISSSLPNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_SSN)
-
-#define WLC_PHY_11N_CAP(band) PHYTYPE_11N_CAP((band)->phytype)
-
-/**********************************************************************
- * ------------- End of Core phy/rev configuration. ----------------- *
- * ********************************************************************
- */
-
-/*************************************************
- * Defaults for tunables (e.g. sizing constants)
- *
- * For each new tunable, add a member to the end
- * of wlc_tunables_t in wlc_pub.h to enable
- * runtime checks of tunable values. (Directly
- * using the macros in code invalidates ROM code)
- *
- * ***********************************************
- */
-#ifndef NTXD
-#define NTXD 256 /* Max # of entries in Tx FIFO based on 4kb page size */
-#endif /* NTXD */
-#ifndef NRXD
-#define NRXD 256 /* Max # of entries in Rx FIFO based on 4kb page size */
-#endif /* NRXD */
-
-#ifndef NRXBUFPOST
-#define NRXBUFPOST 32 /* try to keep this # rbufs posted to the chip */
-#endif /* NRXBUFPOST */
-
-#ifndef MAXSCB /* station control blocks in cache */
-#define MAXSCB 32 /* Maximum SCBs in cache for STA */
-#endif /* MAXSCB */
-
-#ifndef AMPDU_NUM_MPDU
-#define AMPDU_NUM_MPDU 16 /* max allowed number of mpdus in an ampdu (2 streams) */
-#endif /* AMPDU_NUM_MPDU */
-
-#ifndef AMPDU_NUM_MPDU_3STREAMS
-#define AMPDU_NUM_MPDU_3STREAMS 32 /* max allowed number of mpdus in an ampdu for 3+ streams */
-#endif /* AMPDU_NUM_MPDU_3STREAMS */
-
-/* Count of packet callback structures. either of following
- * 1. Set to the number of SCBs since a STA
- * can queue up a rate callback for each IBSS STA it knows about, and an AP can
- * queue up an "are you there?" Null Data callback for each associated STA
- * 2. controlled by tunable config file
- */
-#ifndef MAXPKTCB
-#define MAXPKTCB MAXSCB /* Max number of packet callbacks */
-#endif /* MAXPKTCB */
-
-#ifndef CTFPOOLSZ
-#define CTFPOOLSZ 128
-#endif /* CTFPOOLSZ */
-
-/* NetBSD also needs to keep track of this */
-#define WLC_MAX_UCODE_BSS (16) /* Number of BSS handled in ucode bcn/prb */
-#define WLC_MAX_UCODE_BSS4 (4) /* Number of BSS handled in sw bcn/prb */
-#ifndef WLC_MAXBSSCFG
-#define WLC_MAXBSSCFG (1) /* max # BSS configs */
-#endif /* WLC_MAXBSSCFG */
-
-#ifndef MAXBSS
-#define MAXBSS 64 /* max # available networks */
-#endif /* MAXBSS */
-
-#ifndef WLC_DATAHIWAT
-#define WLC_DATAHIWAT 50 /* data msg txq hiwat mark */
-#endif /* WLC_DATAHIWAT */
-
-#ifndef WLC_AMPDUDATAHIWAT
-#define WLC_AMPDUDATAHIWAT 255
-#endif /* WLC_AMPDUDATAHIWAT */
-
-/* bounded rx loops */
-#ifndef RXBND
-#define RXBND 8 /* max # frames to process in wlc_recv() */
-#endif /* RXBND */
-#ifndef TXSBND
-#define TXSBND 8 /* max # tx status to process in wlc_txstatus() */
-#endif /* TXSBND */
-
-#define BAND_5G(bt) ((bt) == WLC_BAND_5G)
-#define BAND_2G(bt) ((bt) == WLC_BAND_2G)
-
-#define WLBANDINITDATA(_data) _data
-#define WLBANDINITFN(_fn) _fn
-
-#endif /* _BRCM_CFG_H_ */
#include "types.h"
#include "d11.h"
-#include "cfg.h"
#include "scb.h"
#include "pub.h"
#include "key.h"
#define WLC_TXPWR_DB_FACTOR 4 /* conversion for phy txpwr cacluations that use .25 dB units */
+
struct wlc_info;
/* maxpwr mapping to 5GHz band channels:
#define WLC_MAXPWR_TBL_SIZE 6 /* max of BAND_5G_PWR_LVLS and 6 for 2.4 GHz */
#define WLC_MAXPWR_MIMO_TBL_SIZE 14 /* max of BAND_5G_PWR_LVLS and 14 for 2.4 GHz */
+#define NBANDS(wlc) ((wlc)->pub->_nbands)
+#define NBANDS_PUB(pub) ((pub)->_nbands)
+#define NBANDS_HW(hw) ((hw)->_nbands)
+
+#define IS_SINGLEBAND_5G(device) 0
+
/* locale channel and power info. */
typedef struct {
u32 valid_channels;
#include "phy/phy_int.h"
#include "d11.h"
#include "types.h"
-#include "cfg.h"
#include "key.h"
#include "channel.h"
#include "scb.h"
#include "pmu.h"
#include "d11.h"
#include "types.h"
-#include "cfg.h"
#include "rate.h"
#include "scb.h"
#include "pub.h"
#include "key.h"
-#include "bsscfg.h"
#include "phy/phy_hal.h"
#include "channel.h"
#include "main.h"
#define _WLC_PREC_VO 12 /* Vo - Voice */
#define _WLC_PREC_NC 14 /* NC - Network Control */
+#define MAXMACLIST 64 /* max # source MAC matches */
+#define BCN_TEMPLATE_COUNT 2
+
+#define WLC_BSSCFG_HW_BCN 0x20 /* The BSS is generating beacons in HW */
+
+#define HWBCN_ENAB(cfg) (((cfg)->flags & WLC_BSSCFG_HW_BCN) != 0)
+#define HWPRB_ENAB(cfg) (((cfg)->flags & WLC_BSSCFG_HW_PRB) != 0)
+
+#define MBSS_BCN_ENAB(cfg) 0
+#define MBSS_PRB_ENAB(cfg) 0
+#define SOFTBCN_ENAB(pub) (0)
+
/* 802.1D Priority to precedence queue mapping */
const u8 wlc_prio2prec_map[] = {
_WLC_PREC_BE, /* 0 BE - Best-effort */
_WLC_PREC_NC, /* 7 NC - Network Control */
};
+/* Check if a particular BSS config is AP or STA */
+#define BSSCFG_AP(cfg) (0)
+#define BSSCFG_STA(cfg) (1)
+#define BSSCFG_IBSS(cfg) (!(cfg)->BSS)
+
+/* Iterator for "associated" STA bss configs:
+ (struct wlc_info *wlc, int idx, struct wlc_bsscfg *cfg) */
+#define FOREACH_AS_STA(wlc, idx, cfg) \
+ for (idx = 0; (int) idx < WLC_MAXBSSCFG; idx++) \
+ if ((cfg = (wlc)->bsscfg[idx]) && BSSCFG_STA(cfg) && cfg->associated)
+
+/* As above for all non-NULL BSS configs */
+#define FOREACH_BSS(wlc, idx, cfg) \
+ for (idx = 0; (int) idx < WLC_MAXBSSCFG; idx++) \
+ if ((cfg = (wlc)->bsscfg[idx]))
+
/* Sanity check for tx_prec_map and fifo synchup
* Either there are some packets pending for the fifo, else if fifo is empty then
* all the corresponding precmap bits should be set
#define EDCF_AIFSN_MIN 1
#define FRAGNUM_MASK 0xF
+#define NTXRATE 64 /* # tx MPDUs rate is reported for */
+
#define WLC_BITSCNT(x) brcmu_bitcount((u8 *)&(x), sizeof(u8))
/* Maximum wait time for a MAC suspend */
wlc_antselcfg_t antcfg_cur; /* current antenna config (auto) */
};
+/* BSS configuration state */
+struct wlc_bsscfg {
+ struct wlc_info *wlc; /* wlc to which this bsscfg belongs to. */
+ bool up; /* is this configuration up operational */
+ bool enable; /* is this configuration enabled */
+ bool associated; /* is BSS in ASSOCIATED state */
+ bool BSS; /* infraustructure or adhac */
+ bool dtim_programmed;
+
+ u8 SSID_len; /* the length of SSID */
+ u8 SSID[IEEE80211_MAX_SSID_LEN]; /* SSID string */
+ struct scb *bcmc_scb[MAXBANDS]; /* one bcmc_scb per band */
+ s8 _idx; /* the index of this bsscfg,
+ * assigned at wlc_bsscfg_alloc()
+ */
+ /* MAC filter */
+ uint nmac; /* # of entries on maclist array */
+ int macmode; /* allow/deny stations on maclist array */
+ struct ether_addr *maclist; /* list of source MAC addrs to match */
+
+ /* security */
+ u32 wsec; /* wireless security bitvec */
+ s16 auth; /* 802.11 authentication: Open, Shared Key, WPA */
+ s16 openshared; /* try Open auth first, then Shared Key */
+ bool wsec_restrict; /* drop unencrypted packets if wsec is enabled */
+ bool eap_restrict; /* restrict data until 802.1X auth succeeds */
+ u16 WPA_auth; /* WPA: authenticated key management */
+ bool wpa2_preauth; /* default is true, wpa_cap sets value */
+ bool wsec_portopen; /* indicates keys are plumbed */
+ wsec_iv_t wpa_none_txiv; /* global txiv for WPA_NONE, tkip and aes */
+ int wsec_index; /* 0-3: default tx key, -1: not set */
+ wsec_key_t *bss_def_keys[WLC_DEFAULT_KEYS]; /* default key storage */
+
+ /* TKIP countermeasures */
+ bool tkip_countermeasures; /* flags TKIP no-assoc period */
+ u32 tk_cm_dt; /* detect timer */
+ u32 tk_cm_bt; /* blocking timer */
+ u32 tk_cm_bt_tmstmp; /* Timestamp when TKIP BT is activated */
+ bool tk_cm_activate; /* activate countermeasures after EAPOL-Key sent */
+
+ u8 BSSID[ETH_ALEN]; /* BSSID (associated) */
+ u8 cur_etheraddr[ETH_ALEN]; /* h/w address */
+ u16 bcmc_fid; /* the last BCMC FID queued to TX_BCMC_FIFO */
+ u16 bcmc_fid_shm; /* the last BCMC FID written to shared mem */
+
+ u32 flags; /* WLC_BSSCFG flags; see below */
+
+ u8 *bcn; /* AP beacon */
+ uint bcn_len; /* AP beacon length */
+ bool ar_disassoc; /* disassociated in associated recreation */
+
+ int auth_atmptd; /* auth type (open/shared) attempted */
+
+ pmkid_cand_t pmkid_cand[MAXPMKID]; /* PMKID candidate list */
+ uint npmkid_cand; /* num PMKID candidates */
+ pmkid_t pmkid[MAXPMKID]; /* PMKID cache */
+ uint npmkid; /* num cached PMKIDs */
+
+ wlc_bss_info_t *current_bss; /* BSS parms in ASSOCIATED state */
+
+ /* PM states */
+ bool PMawakebcn; /* bcn recvd during current waking state */
+ bool PMpending; /* waiting for tx status with PM indicated set */
+ bool priorPMstate; /* Detecting PM state transitions */
+ bool PSpoll; /* whether there is an outstanding PS-Poll frame */
+
+ /* BSSID entry in RCMTA, use the wsec key management infrastructure to
+ * manage the RCMTA entries.
+ */
+ wsec_key_t *rcmta;
+
+ /* 'unique' ID of this bsscfg, assigned at bsscfg allocation */
+ u16 ID;
+
+ uint txrspecidx; /* index into tx rate circular buffer */
+ ratespec_t txrspec[NTXRATE][2]; /* circular buffer of prev MPDUs tx rates */
+};
+
#define CHANNEL_BANDUNIT(wlc, ch) (((ch) <= CH_MAX_2G_CHANNEL) ? BAND_2G_INDEX : BAND_5G_INDEX)
#define OTHERBANDUNIT(wlc) ((uint)((wlc)->band->bandunit ? BAND_2G_INDEX : BAND_5G_INDEX))
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-#include <cfg.h>
-
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/bitops.h>
#include <linux/string.h>
#include <linux/bitops.h>
#include <linux/delay.h>
-#include <cfg.h>
#include <linux/pci.h>
#include <brcmu_utils.h>
#include <aiutils.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <defs.h>
-#include <cfg.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <aiutils.h>
#include <pmu.h>
#include "types.h"
-#include "cfg.h"
#include "d11.h"
#include "rate.h"
#include "scb.h"
#include "types.h"
#include "d11.h"
-#include "cfg.h"
#include "scb.h"
#include "pub.h"
#include "rate.h"
#include "types.h"
#include "d11.h"
-#include "cfg.h"
#include "rate.h"
#include "scb.h"
#include "pub.h"
#define BOARD_GPIO_12 0x1000 /* gpio 12 */
#define BOARD_GPIO_13 0x2000 /* gpio 13 */
+/* **** Core type/rev defaults **** */
+#define D11CONF 0x0fffffb0 /* Supported D11 revs: 4, 5, 7-27
+ * also need to update wlc.h MAXCOREREV
+ */
+
+#define NCONF 0x000001ff /* Supported nphy revs:
+ * 0 4321a0
+ * 1 4321a1
+ * 2 4321b0/b1/c0/c1
+ * 3 4322a0
+ * 4 4322a1
+ * 5 4716a0
+ * 6 43222a0, 43224a0
+ * 7 43226a0
+ * 8 5357a0, 43236a0
+ */
+
+#define LCNCONF 0x00000007 /* Supported lcnphy revs:
+ * 0 4313a0, 4336a0, 4330a0
+ * 1
+ * 2 4330a0
+ */
+
+#define SSLPNCONF 0x0000000f /* Supported sslpnphy revs:
+ * 0 4329a0/k0
+ * 1 4329b0/4329C0
+ * 2 4319a0
+ * 3 5356a0
+ */
+
+/********************************************************************
+ * Phy/Core Configuration. Defines macros to to check core phy/rev *
+ * compile-time configuration. Defines default core support. *
+ * ******************************************************************
+ */
+
+/* Basic macros to check a configuration bitmask */
+
+#define CONF_HAS(config, val) ((config) & (1 << (val)))
+#define CONF_MSK(config, mask) ((config) & (mask))
+#define MSK_RANGE(low, hi) ((1 << ((hi)+1)) - (1 << (low)))
+#define CONF_RANGE(config, low, hi) (CONF_MSK(config, MSK_RANGE(low, high)))
+
+#define CONF_IS(config, val) ((config) == (1 << (val)))
+#define CONF_GE(config, val) ((config) & (0-(1 << (val))))
+#define CONF_GT(config, val) ((config) & (0-2*(1 << (val))))
+#define CONF_LT(config, val) ((config) & ((1 << (val))-1))
+#define CONF_LE(config, val) ((config) & (2*(1 << (val))-1))
+
+/* Wrappers for some of the above, specific to config constants */
+
+#define NCONF_HAS(val) CONF_HAS(NCONF, val)
+#define NCONF_MSK(mask) CONF_MSK(NCONF, mask)
+#define NCONF_IS(val) CONF_IS(NCONF, val)
+#define NCONF_GE(val) CONF_GE(NCONF, val)
+#define NCONF_GT(val) CONF_GT(NCONF, val)
+#define NCONF_LT(val) CONF_LT(NCONF, val)
+#define NCONF_LE(val) CONF_LE(NCONF, val)
+
+#define LCNCONF_HAS(val) CONF_HAS(LCNCONF, val)
+#define LCNCONF_MSK(mask) CONF_MSK(LCNCONF, mask)
+#define LCNCONF_IS(val) CONF_IS(LCNCONF, val)
+#define LCNCONF_GE(val) CONF_GE(LCNCONF, val)
+#define LCNCONF_GT(val) CONF_GT(LCNCONF, val)
+#define LCNCONF_LT(val) CONF_LT(LCNCONF, val)
+#define LCNCONF_LE(val) CONF_LE(LCNCONF, val)
+
+#define D11CONF_HAS(val) CONF_HAS(D11CONF, val)
+#define D11CONF_MSK(mask) CONF_MSK(D11CONF, mask)
+#define D11CONF_IS(val) CONF_IS(D11CONF, val)
+#define D11CONF_GE(val) CONF_GE(D11CONF, val)
+#define D11CONF_GT(val) CONF_GT(D11CONF, val)
+#define D11CONF_LT(val) CONF_LT(D11CONF, val)
+#define D11CONF_LE(val) CONF_LE(D11CONF, val)
+
+#define PHYCONF_HAS(val) CONF_HAS(PHYTYPE, val)
+#define PHYCONF_IS(val) CONF_IS(PHYTYPE, val)
+
+#define NREV_IS(var, val) (NCONF_HAS(val) && (NCONF_IS(val) || ((var) == (val))))
+#define NREV_GE(var, val) (NCONF_GE(val) && (!NCONF_LT(val) || ((var) >= (val))))
+#define NREV_GT(var, val) (NCONF_GT(val) && (!NCONF_LE(val) || ((var) > (val))))
+#define NREV_LT(var, val) (NCONF_LT(val) && (!NCONF_GE(val) || ((var) < (val))))
+#define NREV_LE(var, val) (NCONF_LE(val) && (!NCONF_GT(val) || ((var) <= (val))))
+
+#define LCNREV_IS(var, val) (LCNCONF_HAS(val) && (LCNCONF_IS(val) || ((var) == (val))))
+#define LCNREV_GE(var, val) (LCNCONF_GE(val) && (!LCNCONF_LT(val) || ((var) >= (val))))
+#define LCNREV_GT(var, val) (LCNCONF_GT(val) && (!LCNCONF_LE(val) || ((var) > (val))))
+#define LCNREV_LT(var, val) (LCNCONF_LT(val) && (!LCNCONF_GE(val) || ((var) < (val))))
+#define LCNREV_LE(var, val) (LCNCONF_LE(val) && (!LCNCONF_GT(val) || ((var) <= (val))))
+
+#define D11REV_IS(var, val) (D11CONF_HAS(val) && (D11CONF_IS(val) || ((var) == (val))))
+#define D11REV_GE(var, val) (D11CONF_GE(val) && (!D11CONF_LT(val) || ((var) >= (val))))
+#define D11REV_GT(var, val) (D11CONF_GT(val) && (!D11CONF_LE(val) || ((var) > (val))))
+#define D11REV_LT(var, val) (D11CONF_LT(val) && (!D11CONF_GE(val) || ((var) < (val))))
+#define D11REV_LE(var, val) (D11CONF_LE(val) && (!D11CONF_GT(val) || ((var) <= (val))))
+
+#define PHYTYPE_IS(var, val) (PHYCONF_HAS(val) && (PHYCONF_IS(val) || ((var) == (val))))
+
+/* Finally, early-exit from switch case if anyone wants it... */
+
+#define CASECHECK(config, val) if (!(CONF_HAS(config, val))) break
+#define CASEMSK(config, mask) if (!(CONF_MSK(config, mask))) break
+
+/* Set up PHYTYPE automatically: (depends on PHY_TYPE_X, from d11.h) */
+
+#define _PHYCONF_N (1 << PHY_TYPE_N)
+#define _PHYCONF_LCN (1 << PHY_TYPE_LCN)
+#define _PHYCONF_SSLPN (1 << PHY_TYPE_SSN)
+
+#define PHYTYPE (_PHYCONF_N | _PHYCONF_LCN | _PHYCONF_SSLPN)
+
+/* Utility macro to identify 802.11n (HT) capable PHYs */
+#define PHYTYPE_11N_CAP(phytype) \
+ (PHYTYPE_IS(phytype, PHY_TYPE_N) || \
+ PHYTYPE_IS(phytype, PHY_TYPE_LCN) || \
+ PHYTYPE_IS(phytype, PHY_TYPE_SSN))
+
+/* Last but not least: shorter wlc-specific var checks */
+#define WLCISNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_N)
+#define WLCISLCNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_LCN)
+#define WLCISSSLPNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_SSN)
+
+#define WLC_PHY_11N_CAP(band) PHYTYPE_11N_CAP((band)->phytype)
+
+/**********************************************************************
+ * ------------- End of Core phy/rev configuration. ----------------- *
+ * ********************************************************************
+ */
+
+/*************************************************
+ * Defaults for tunables (e.g. sizing constants)
+ *
+ * For each new tunable, add a member to the end
+ * of wlc_tunables_t in wlc_pub.h to enable
+ * runtime checks of tunable values. (Directly
+ * using the macros in code invalidates ROM code)
+ *
+ * ***********************************************
+ */
+#define NTXD 256 /* Max # of entries in Tx FIFO based on 4kb page size */
+#define NRXD 256 /* Max # of entries in Rx FIFO based on 4kb page size */
+#define NRXBUFPOST 32 /* try to keep this # rbufs posted to the chip */
+#define MAXSCB 32 /* Maximum SCBs in cache for STA */
+#define AMPDU_NUM_MPDU 16 /* max allowed number of mpdus in an ampdu (2 streams) */
+
+/* Count of packet callback structures. either of following
+ * 1. Set to the number of SCBs since a STA
+ * can queue up a rate callback for each IBSS STA it knows about, and an AP can
+ * queue up an "are you there?" Null Data callback for each associated STA
+ * 2. controlled by tunable config file
+ */
+#define MAXPKTCB MAXSCB /* Max number of packet callbacks */
+
+/* NetBSD also needs to keep track of this */
+#define WLC_MAX_UCODE_BSS (16) /* Number of BSS handled in ucode bcn/prb */
+#define WLC_MAX_UCODE_BSS4 (4) /* Number of BSS handled in sw bcn/prb */
+#define WLC_MAXBSSCFG (1) /* max # BSS configs */
+#define MAXBSS 64 /* max # available networks */
+#define WLC_DATAHIWAT 50 /* data msg txq hiwat mark */
+#define WLC_AMPDUDATAHIWAT 255
+
+/* bounded rx loops */
+#define RXBND 8 /* max # frames to process in wlc_recv() */
+#define TXSBND 8 /* max # tx status to process in wlc_txstatus() */
+
+#define WLBANDINITFN(_fn) _fn
+
+#define BAND_5G(bt) ((bt) == WLC_BAND_5G)
+#define BAND_2G(bt) ((bt) == WLC_BAND_2G)
+
#define BCMMSG(dev, fmt, args...) \
do { \
if (brcm_msg_level & LOG_TRACE_VAL) \
#define SET_REG(r, mask, val) \
W_REG((r), ((R_REG(r) & ~(mask)) | (val)))
+
/* forward declarations */
struct sk_buff;
struct brcms_info;
projects / firefly-linux-kernel-4.4.55.git / commitdiff