i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg
authorJarkko Nikula <jarkko.nikula@nokia.com>
Fri, 21 Nov 2008 21:39:45 +0000 (13:39 -0800)
committerTony Lindgren <tony@atomide.com>
Fri, 21 Nov 2008 21:39:45 +0000 (13:39 -0800)
If there is a signal pending and wait_for_completion_interruptible_timeout
terminates with -ERESTARTSYS, we return and disable the i2c clocks in
omap_i2c_xfer.

If we terminate before sending last i2c message with a stop condition, the
bus remains busy and we are not able to send new messages into bus with
successive omap_i2c_xfer calls. Therefore a pending signal is not caught
here and we return only because of timeout or i2c error.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
drivers/i2c/busses/i2c-omap.c

index 608038d64f81e7b6f0856fcad9b2faeae6fa830e..17476ecd97829ccf1849ee253f7d992da0d7dab7 100644 (file)
@@ -328,8 +328,12 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
                w |= OMAP_I2C_CON_STP;
        omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
 
-       r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
-                                                     OMAP_I2C_TIMEOUT);
+       /*
+        * REVISIT: We should abort the transfer on signals, but the bus goes
+        * into arbitration and we're currently unable to recover from it.
+        */
+       r = wait_for_completion_timeout(&dev->cmd_complete,
+                                       OMAP_I2C_TIMEOUT);
        dev->buf_len = 0;
        if (r < 0)
                return r;