S2io: Fixes to enable multiple transmit fifos
authorRamkrishna Vepa <ram.vepa@neterion.com>
Mon, 17 Dec 2007 19:40:15 +0000 (11:40 -0800)
committerDavid S. Miller <davem@davemloft.net>
Mon, 28 Jan 2008 23:07:24 +0000 (15:07 -0800)
Multiple transmit fifo initialization -
  - Assigned equal scheduling priority for all configured FIFO's.
  - Modularized transmit traffic interrupt initialization since it is executed in
    s2io_card_up and s2io_link. Enable continuous tx interrupt when link is UP
    and vice verse.
  - Enable transmit interrupts for all configured transmit fifos.
  - Fixed typo errors.

Signed-off-by: Surjit Reang <surjit.reang@neterion.com>
Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/net/s2io.c

index e2c206c7391bb8c02038bf408046a6fdfd67e86a..5fab7d7b5d74a430dd9e72870ba347fa38d07f47 100644 (file)
@@ -84,7 +84,7 @@
 #include "s2io.h"
 #include "s2io-regs.h"
 
-#define DRV_VERSION "2.0.26.15-1"
+#define DRV_VERSION "2.0.26.15-2"
 
 /* S2io Driver name & version. */
 static char s2io_driver_name[] = "Neterion";
@@ -1078,9 +1078,68 @@ static int s2io_print_pci_mode(struct s2io_nic *nic)
        return mode;
 }
 
+/**
+ *  init_tti - Initialization transmit traffic interrupt scheme
+ *  @nic: device private variable
+ *  @link: link status (UP/DOWN) used to enable/disable continuous
+ *  transmit interrupts
+ *  Description: The function configures transmit traffic interrupts
+ *  Return Value:  SUCCESS on success and
+ *  '-1' on failure
+ */
+
+int init_tti(struct s2io_nic *nic, int link)
+{
+       struct XENA_dev_config __iomem *bar0 = nic->bar0;
+       register u64 val64 = 0;
+       int i;
+       struct config_param *config;
+
+       config = &nic->config;
+
+       for (i = 0; i < config->tx_fifo_num; i++) {
+               /*
+                * TTI Initialization. Default Tx timer gets us about
+                * 250 interrupts per sec. Continuous interrupts are enabled
+                * by default.
+                */
+               if (nic->device_type == XFRAME_II_DEVICE) {
+                       int count = (nic->config.bus_speed * 125)/2;
+                       val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count);
+               } else
+                       val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
+
+               val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
+                               TTI_DATA1_MEM_TX_URNG_B(0x10) |
+                               TTI_DATA1_MEM_TX_URNG_C(0x30) |
+                               TTI_DATA1_MEM_TX_TIMER_AC_EN;
+
+               if (use_continuous_tx_intrs && (link == LINK_UP))
+                       val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
+               writeq(val64, &bar0->tti_data1_mem);
+
+               val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
+                               TTI_DATA2_MEM_TX_UFC_B(0x20) |
+                               TTI_DATA2_MEM_TX_UFC_C(0x40) |
+                               TTI_DATA2_MEM_TX_UFC_D(0x80);
+
+               writeq(val64, &bar0->tti_data2_mem);
+
+               val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD |
+                               TTI_CMD_MEM_OFFSET(i);
+               writeq(val64, &bar0->tti_command_mem);
+
+               if (wait_for_cmd_complete(&bar0->tti_command_mem,
+                       TTI_CMD_MEM_STROBE_NEW_CMD, S2IO_BIT_RESET) != SUCCESS)
+                       return FAILURE;
+       }
+
+       return SUCCESS;
+}
+
 /**
  *  init_nic - Initialization of hardware
- *  @nic: device peivate variable
+ *  @nic: device private variable
  *  Description: The function sequentially configures every block
  *  of the H/W from their reset values.
  *  Return Value:  SUCCESS on success and
@@ -1185,9 +1244,9 @@ static int init_nic(struct s2io_nic *nic)
 
        for (i = 0, j = 0; i < config->tx_fifo_num; i++) {
                val64 |=
-                   vBIT(config->tx_cfg[i].fifo_len - 1, ((i * 32) + 19),
+                   vBIT(config->tx_cfg[i].fifo_len - 1, ((j * 32) + 19),
                         13) | vBIT(config->tx_cfg[i].fifo_priority,
-                                   ((i * 32) + 5), 3);
+                                   ((j * 32) + 5), 3);
 
                if (i == (config->tx_fifo_num - 1)) {
                        if (i % 2 == 0)
@@ -1198,17 +1257,25 @@ static int init_nic(struct s2io_nic *nic)
                case 1:
                        writeq(val64, &bar0->tx_fifo_partition_0);
                        val64 = 0;
+                       j = 0;
                        break;
                case 3:
                        writeq(val64, &bar0->tx_fifo_partition_1);
                        val64 = 0;
+                       j = 0;
                        break;
                case 5:
                        writeq(val64, &bar0->tx_fifo_partition_2);
                        val64 = 0;
+                       j = 0;
                        break;
                case 7:
                        writeq(val64, &bar0->tx_fifo_partition_3);
+                       val64 = 0;
+                       j = 0;
+                       break;
+               default:
+                       j++;
                        break;
                }
        }
@@ -1294,11 +1361,11 @@ static int init_nic(struct s2io_nic *nic)
 
        /*
         * Filling Tx round robin registers
-        * as per the number of FIFOs
+        * as per the number of FIFOs for equal scheduling priority
         */
        switch (config->tx_fifo_num) {
        case 1:
-               val64 = 0x0000000000000000ULL;
+               val64 = 0x0;
                writeq(val64, &bar0->tx_w_round_robin_0);
                writeq(val64, &bar0->tx_w_round_robin_1);
                writeq(val64, &bar0->tx_w_round_robin_2);
@@ -1306,87 +1373,78 @@ static int init_nic(struct s2io_nic *nic)
                writeq(val64, &bar0->tx_w_round_robin_4);
                break;
        case 2:
-               val64 = 0x0000010000010000ULL;
+               val64 = 0x0001000100010001ULL;
                writeq(val64, &bar0->tx_w_round_robin_0);
-               val64 = 0x0100000100000100ULL;
                writeq(val64, &bar0->tx_w_round_robin_1);
-               val64 = 0x0001000001000001ULL;
                writeq(val64, &bar0->tx_w_round_robin_2);
-               val64 = 0x0000010000010000ULL;
                writeq(val64, &bar0->tx_w_round_robin_3);
-               val64 = 0x0100000000000000ULL;
+               val64 = 0x0001000100000000ULL;
                writeq(val64, &bar0->tx_w_round_robin_4);
                break;
        case 3:
-               val64 = 0x0001000102000001ULL;
+               val64 = 0x0001020001020001ULL;
                writeq(val64, &bar0->tx_w_round_robin_0);
-               val64 = 0x0001020000010001ULL;
+               val64 = 0x0200010200010200ULL;
                writeq(val64, &bar0->tx_w_round_robin_1);
-               val64 = 0x0200000100010200ULL;
+               val64 = 0x0102000102000102ULL;
                writeq(val64, &bar0->tx_w_round_robin_2);
-               val64 = 0x0001000102000001ULL;
+               val64 = 0x0001020001020001ULL;
                writeq(val64, &bar0->tx_w_round_robin_3);
-               val64 = 0x0001020000000000ULL;
+               val64 = 0x0200010200000000ULL;
                writeq(val64, &bar0->tx_w_round_robin_4);
                break;
        case 4:
-               val64 = 0x0001020300010200ULL;
+               val64 = 0x0001020300010203ULL;
                writeq(val64, &bar0->tx_w_round_robin_0);
-               val64 = 0x0100000102030001ULL;
                writeq(val64, &bar0->tx_w_round_robin_1);
-               val64 = 0x0200010000010203ULL;
                writeq(val64, &bar0->tx_w_round_robin_2);
-               val64 = 0x0001020001000001ULL;
                writeq(val64, &bar0->tx_w_round_robin_3);
-               val64 = 0x0203000100000000ULL;
+               val64 = 0x0001020300000000ULL;
                writeq(val64, &bar0->tx_w_round_robin_4);
                break;
        case 5:
-               val64 = 0x0001000203000102ULL;
+               val64 = 0x0001020304000102ULL;
                writeq(val64, &bar0->tx_w_round_robin_0);
-               val64 = 0x0001020001030004ULL;
+               val64 = 0x0304000102030400ULL;
                writeq(val64, &bar0->tx_w_round_robin_1);
-               val64 = 0x0001000203000102ULL;
+               val64 = 0x0102030400010203ULL;
                writeq(val64, &bar0->tx_w_round_robin_2);
-               val64 = 0x0001020001030004ULL;
+               val64 = 0x0400010203040001ULL;
                writeq(val64, &bar0->tx_w_round_robin_3);
-               val64 = 0x0001000000000000ULL;
+               val64 = 0x0203040000000000ULL;
                writeq(val64, &bar0->tx_w_round_robin_4);
                break;
        case 6:
-               val64 = 0x0001020304000102ULL;
+               val64 = 0x0001020304050001ULL;
                writeq(val64, &bar0->tx_w_round_robin_0);
-               val64 = 0x0304050001020001ULL;
+               val64 = 0x0203040500010203ULL;
                writeq(val64, &bar0->tx_w_round_robin_1);
-               val64 = 0x0203000100000102ULL;
+               val64 = 0x0405000102030405ULL;
                writeq(val64, &bar0->tx_w_round_robin_2);
-               val64 = 0x0304000102030405ULL;
+               val64 = 0x0001020304050001ULL;
                writeq(val64, &bar0->tx_w_round_robin_3);
-               val64 = 0x0001000200000000ULL;
+               val64 = 0x0203040500000000ULL;
                writeq(val64, &bar0->tx_w_round_robin_4);
                break;
        case 7:
-               val64 = 0x0001020001020300ULL;
+               val64 = 0x0001020304050600ULL;
                writeq(val64, &bar0->tx_w_round_robin_0);
-               val64 = 0x0102030400010203ULL;
+               val64 = 0x0102030405060001ULL;
                writeq(val64, &bar0->tx_w_round_robin_1);
-               val64 = 0x0405060001020001ULL;
+               val64 = 0x0203040506000102ULL;
                writeq(val64, &bar0->tx_w_round_robin_2);
-               val64 = 0x0304050000010200ULL;
+               val64 = 0x0304050600010203ULL;
                writeq(val64, &bar0->tx_w_round_robin_3);
-               val64 = 0x0102030000000000ULL;
+               val64 = 0x0405060000000000ULL;
                writeq(val64, &bar0->tx_w_round_robin_4);
                break;
        case 8:
-               val64 = 0x0001020300040105ULL;
+               val64 = 0x0001020304050607ULL;
                writeq(val64, &bar0->tx_w_round_robin_0);
-               val64 = 0x0200030106000204ULL;
                writeq(val64, &bar0->tx_w_round_robin_1);
-               val64 = 0x0103000502010007ULL;
                writeq(val64, &bar0->tx_w_round_robin_2);
-               val64 = 0x0304010002060500ULL;
                writeq(val64, &bar0->tx_w_round_robin_3);
-               val64 = 0x0103020400000000ULL;
+               val64 = 0x0001020300000000ULL;
                writeq(val64, &bar0->tx_w_round_robin_4);
                break;
        }
@@ -1563,58 +1621,14 @@ static int init_nic(struct s2io_nic *nic)
            MAC_RX_LINK_UTIL_VAL(rmac_util_period);
        writeq(val64, &bar0->mac_link_util);
 
-
        /*
         * Initializing the Transmit and Receive Traffic Interrupt
         * Scheme.
         */
-       /*
-        * TTI Initialization. Default Tx timer gets us about
-        * 250 interrupts per sec. Continuous interrupts are enabled
-        * by default.
-        */
-       if (nic->device_type == XFRAME_II_DEVICE) {
-               int count = (nic->config.bus_speed * 125)/2;
-               val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count);
-       } else {
-
-               val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
-       }
-       val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
-           TTI_DATA1_MEM_TX_URNG_B(0x10) |
-           TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN;
-               if (use_continuous_tx_intrs)
-                       val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
-       writeq(val64, &bar0->tti_data1_mem);
-
-       val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
-           TTI_DATA2_MEM_TX_UFC_B(0x20) |
-           TTI_DATA2_MEM_TX_UFC_C(0x40) | TTI_DATA2_MEM_TX_UFC_D(0x80);
-       writeq(val64, &bar0->tti_data2_mem);
 
-       val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD;
-       writeq(val64, &bar0->tti_command_mem);
-
-       /*
-        * Once the operation completes, the Strobe bit of the command
-        * register will be reset. We poll for this particular condition
-        * We wait for a maximum of 500ms for the operation to complete,
-        * if it's not complete by then we return error.
-        */
-       time = 0;
-       while (TRUE) {
-               val64 = readq(&bar0->tti_command_mem);
-               if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) {
-                       break;
-               }
-               if (time > 10) {
-                       DBG_PRINT(ERR_DBG, "%s: TTI init Failed\n",
-                                 dev->name);
-                       return -ENODEV;
-               }
-               msleep(50);
-               time++;
-       }
+       /* Initialize TTI */
+       if (SUCCESS != init_tti(nic, nic->last_link_state))
+               return -ENODEV;
 
        /* RTI Initialization */
        if (nic->device_type == XFRAME_II_DEVICE) {
@@ -7443,6 +7457,7 @@ static void s2io_link(struct s2io_nic * sp, int link)
        struct net_device *dev = (struct net_device *) sp->dev;
 
        if (link != sp->last_link_state) {
+               init_tti(sp, link);
                if (link == LINK_DOWN) {
                        DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
                        netif_carrier_off(dev);
@@ -7541,7 +7556,7 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type)
 /**
  * rts_ds_steer - Receive traffic steering based on IPv4 or IPv6 TOS
  * or Traffic class respectively.
- * @nic: device peivate variable
+ * @nic: device private variable
  * Description: The function configures the receive steering to
  * desired receive ring.
  * Return Value:  SUCCESS on success and