#include <mach/io.h>
#include <mach/gpio.h>
#include <mach/iomux.h>
+
/*set touchscreen different type header*/
#if defined(CONFIG_TOUCHSCREEN_XPT2046_NORMAL_SPI)
#include "../../../drivers/input/touchscreen/xpt2046_ts.h"
static rk_sensor_user_init_data_s* rk_init_data_sensor_1_p = NULL;
#include "../../../drivers/media/video/rk30_camera.c"
-#endif
+#endif /* CONFIG_VIDEO_RK29 */
#if defined(CONFIG_TOUCHSCREEN_GT8XX)
#define TOUCH_RESET_PIN RK30_PIN4_PD0
{
int ret;
printk("goodix_init_platform_hw\n");
- if(TOUCH_PWR_PIN != INVALID_GPIO)
- {
+ if (TOUCH_PWR_PIN != INVALID_GPIO) {
ret = gpio_request(TOUCH_PWR_PIN, "goodix power pin");
- if(ret != 0){
+ if (ret != 0) {
gpio_free(TOUCH_PWR_PIN);
printk("goodix power error\n");
return -EIO;
}
gpio_direction_output(TOUCH_PWR_PIN, 0);
- gpio_set_value(TOUCH_PWR_PIN,GPIO_LOW);
+ gpio_set_value(TOUCH_PWR_PIN, GPIO_LOW);
msleep(100);
}
-
- if(TOUCH_RESET_PIN != INVALID_GPIO)
- {
+
+ if (TOUCH_RESET_PIN != INVALID_GPIO) {
ret = gpio_request(TOUCH_RESET_PIN, "goodix reset pin");
- if(ret != 0){
+ if (ret != 0) {
gpio_free(TOUCH_RESET_PIN);
printk("goodix gpio_request error\n");
return -EIO;
}
gpio_direction_output(TOUCH_RESET_PIN, 0);
- gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
+ gpio_set_value(TOUCH_RESET_PIN, GPIO_LOW);
msleep(10);
- gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
+ gpio_set_value(TOUCH_RESET_PIN, GPIO_HIGH);
msleep(500);
}
return 0;
}
struct goodix_platform_data goodix_info = {
- .model= 8105,
- .irq_pin = RK30_PIN4_PC2,
- .rest_pin = TOUCH_RESET_PIN,
- .init_platform_hw = goodix_init_platform_hw,
+ .model = 8105,
+ .irq_pin = RK30_PIN4_PC2,
+ .rest_pin = TOUCH_RESET_PIN,
+ .init_platform_hw = goodix_init_platform_hw,
};
#endif
-
/*****************************************************************************************
* xpt2046 touch panel
* author: hhb@rock-chips.com
*****************************************************************************************/
#if defined(CONFIG_TOUCHSCREEN_XPT2046_NORMAL_SPI) || defined(CONFIG_TOUCHSCREEN_XPT2046_TSLIB_SPI)
-#define XPT2046_GPIO_INT RK30_PIN4_PC2
+#define XPT2046_GPIO_INT RK30_PIN4_PC2
#define DEBOUNCE_REPTIME 3
-
static struct xpt2046_platform_data xpt2046_info = {
- .model = 2046,
- .keep_vref_on = 1,
- .swap_xy = 0,
- .debounce_max = 7,
- .debounce_rep = DEBOUNCE_REPTIME,
- .debounce_tol = 20,
- .gpio_pendown = XPT2046_GPIO_INT,
- .pendown_iomux_name = GPIO4C2_SMCDATA2_TRACEDATA2_NAME,
- .pendown_iomux_mode = GPIO4C_GPIO4C2,
+ .model = 2046,
+ .keep_vref_on = 1,
+ .swap_xy = 0,
+ .debounce_max = 7,
+ .debounce_rep = DEBOUNCE_REPTIME,
+ .debounce_tol = 20,
+ .gpio_pendown = XPT2046_GPIO_INT,
+ .pendown_iomux_name = GPIO4C2_SMCDATA2_TRACEDATA2_NAME,
+ .pendown_iomux_mode = GPIO4C_GPIO4C2,
.touch_virtualkey_length = 60,
.penirq_recheck_delay_usecs = 1,
#if defined(CONFIG_TOUCHSCREEN_480X800)
- .x_min = 0,
- .x_max = 480,
- .y_min = 0,
- .y_max = 800,
+ .x_min = 0,
+ .x_max = 480,
+ .y_min = 0,
+ .y_max = 800,
.touch_ad_top = 3940,
.touch_ad_bottom = 310,
.touch_ad_left = 3772,
.touch_ad_right = 340,
#elif defined(CONFIG_TOUCHSCREEN_800X480)
- .x_min = 0,
- .x_max = 800,
- .y_min = 0,
- .y_max = 480,
+ .x_min = 0,
+ .x_max = 800,
+ .y_min = 0,
+ .y_max = 480,
.touch_ad_top = 2447,
.touch_ad_bottom = 207,
.touch_ad_left = 5938,
.touch_ad_right = 153,
#elif defined(CONFIG_TOUCHSCREEN_320X480)
- .x_min = 0,
- .x_max = 320,
- .y_min = 0,
- .y_max = 480,
+ .x_min = 0,
+ .x_max = 320,
+ .y_min = 0,
+ .y_max = 480,
.touch_ad_top = 3166,
.touch_ad_bottom = 256,
.touch_ad_left = 3658,
.touch_ad_right = 380,
-#endif
+#endif
};
#elif defined(CONFIG_TOUCHSCREEN_XPT2046_CBN_SPI)
static struct xpt2046_platform_data xpt2046_info = {
- .model = 2046,
- .keep_vref_on = 1,
- .swap_xy = 0,
- .debounce_max = 7,
- .debounce_rep = DEBOUNCE_REPTIME,
- .debounce_tol = 20,
- .gpio_pendown = XPT2046_GPIO_INT,
- .pendown_iomux_name = GPIO4C2_SMCDATA2_TRACEDATA2_NAME,
- .pendown_iomux_mode = GPIO4C_GPIO4C2,
+ .model = 2046,
+ .keep_vref_on = 1,
+ .swap_xy = 0,
+ .debounce_max = 7,
+ .debounce_rep = DEBOUNCE_REPTIME,
+ .debounce_tol = 20,
+ .gpio_pendown = XPT2046_GPIO_INT,
+ .pendown_iomux_name = GPIO4C2_SMCDATA2_TRACEDATA2_NAME,
+ .pendown_iomux_mode = GPIO4C_GPIO4C2,
.touch_virtualkey_length = 60,
.penirq_recheck_delay_usecs = 1,
-
+
#if defined(CONFIG_TOUCHSCREEN_480X800)
- .x_min = 0,
- .x_max = 480,
- .y_min = 0,
- .y_max = 800,
- .screen_x = { 70, 410, 70, 410, 240},
- .screen_y = { 50, 50, 740, 740, 400},
- .uncali_x_default = { 3267, 831, 3139, 715, 1845 },
- .uncali_y_default = { 3638, 3664, 564, 591, 2087 },
+ .x_min = 0,
+ .x_max = 480,
+ .y_min = 0,
+ .y_max = 800,
+ .screen_x = {70, 410, 70, 410, 240},
+ .screen_y = {50, 50, 740, 740, 400},
+ .uncali_x_default = {3267, 831, 3139, 715, 1845},
+ .uncali_y_default = {3638, 3664, 564, 591, 2087},
#elif defined(CONFIG_TOUCHSCREEN_800X480)
- .x_min = 0,
- .x_max = 800,
- .y_min = 0,
- .y_max = 480,
- .screen_x[5] = { 50, 750, 50, 750, 400};
- .screen_y[5] = { 40, 40, 440, 440, 240};
- .uncali_x_default[5] = { 438, 565, 3507, 3631, 2105 };
- .uncali_y_default[5] = { 3756, 489, 3792, 534, 2159 };
+ .x_min = 0,
+ .x_max = 800,
+ .y_min = 0,
+ .y_max = 480,
+ .screen_x[5] = {50, 750, 50, 750, 400};
+ .screen_y[5] = {40, 40, 440, 440, 240};
+ .uncali_x_default[5] = {438, 565, 3507, 3631, 2105};
+ .uncali_y_default[5] = {3756, 489, 3792, 534, 2159};
#elif defined(CONFIG_TOUCHSCREEN_320X480)
- .x_min = 0,
- .x_max = 320,
- .y_min = 0,
- .y_max = 480,
- .screen_x[5] = { 50, 270, 50, 270, 160};
- .screen_y[5] = { 40, 40, 440, 440, 240};
- .uncali_x_default[5] = { 812, 3341, 851, 3371, 2183 };
- .uncali_y_default[5] = { 442, 435, 3193, 3195, 2004 };
-#endif
+ .x_min = 0,
+ .x_max = 320,
+ .y_min = 0,
+ .y_max = 480,
+ .screen_x[5] = {50, 270, 50, 270, 160};
+ .screen_y[5] = {40, 40, 440, 440, 240};
+ .uncali_x_default[5] = {812, 3341, 851, 3371, 2183};
+ .uncali_y_default[5] = {442, 435, 3193, 3195, 2004};
+#endif
};
#endif
#if defined(CONFIG_TOUCHSCREEN_XPT2046_SPI)
.max_speed_hz = 1 * 1000 * 800,/* (max sample rate @ 3V) * (cmd + data + overhead) */
.bus_num = 0,
.irq = XPT2046_GPIO_INT,
- .platform_data = &xpt2046_info,
+ .platform_data = &xpt2046_info,
.controller_data = &xpt2046_chip,
},
#endif
};
-
/***********************************************************
* rk30 backlight
************************************************************/
// rk30_mux_api_set(BL_EN_MUX_NAME, BL_EN_MUX_MODE);
ret = gpio_request(BL_EN_PIN, NULL);
- if(ret != 0)
- {
+ if (ret != 0) {
gpio_free(BL_EN_PIN);
}
gpio_direction_output(BL_EN_PIN, 0);
gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
#endif
- return ret;
+ return ret;
}
static int rk29_backlight_io_deinit(void)
#ifdef LCD_DISP_ON_PIN
gpio_free(BL_EN_PIN);
#endif
- rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
- return ret;
+ rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
+ return ret;
}
static int rk29_backlight_pwm_suspend(void)
}
static struct rk29_bl_info rk29_bl_info = {
- .pwm_id = PWM_ID,
- .bl_ref = PWM_EFFECT_VALUE,
- .io_init = rk29_backlight_io_init,
- .io_deinit = rk29_backlight_io_deinit,
- .pwm_suspend = rk29_backlight_pwm_suspend,
- .pwm_resume = rk29_backlight_pwm_resume,
+ .pwm_id = PWM_ID,
+ .bl_ref = PWM_EFFECT_VALUE,
+ .io_init = rk29_backlight_io_init,
+ .io_deinit = rk29_backlight_io_deinit,
+ .pwm_suspend = rk29_backlight_pwm_suspend,
+ .pwm_resume = rk29_backlight_pwm_resume,
};
-
static struct platform_device rk29_device_backlight = {
.name = "rk29_backlight",
.id = -1,
- .dev = {
- .platform_data = &rk29_bl_info,
- }
+ .dev = {
+ .platform_data = &rk29_bl_info,
+ }
};
#endif
{
rk30_mux_api_set(GPIO4C0_SMCDATA0_TRACEDATA0_NAME, GPIO4C_GPIO4C0);
- if(gpio_request(MMA8452_INT_PIN,NULL) != 0){
+ if (gpio_request(MMA8452_INT_PIN, NULL) != 0) {
gpio_free(MMA8452_INT_PIN);
printk("mma8452_init_platform_hw gpio_request error\n");
return -EIO;
return 0;
}
-
static struct mma8452_platform_data mma8452_info = {
- .model= 8452,
+ .model = 8452,
.swap_xy = 0,
.swap_xyz = 1,
- .init_platform_hw= mma8452_init_platform_hw,
- .orientation = { -1, 0, 0, 0, 0, 1, 0, -1, 0},
+ .init_platform_hw = mma8452_init_platform_hw,
+ .orientation = {-1, 0, 0, 0, 0, 1, 0, -1, 0},
};
#endif
#if defined (CONFIG_COMPASS_AK8975)
.m_layout =
{
{
- {1, 0, 0 },
- {0, -1, 0 },
- {0, 0, -1 },
+ {1, 0, 0},
+ {0, -1, 0},
+ {0, 0, -1},
},
{
- {1, 0, 0 },
- {0, 1, 0 },
- {0, 0, 1 },
+ {1, 0, 0},
+ {0, 1, 0},
+ {0, 0, 1},
},
{
- {1, 0, 0 },
- {0, 1, 0 },
- {0, 0, 1 },
+ {1, 0, 0},
+ {0, 1, 0},
+ {0, 0, 1},
},
{
- {1, 0, 0 },
- {0, 1, 0 },
- {0, 0, 1 },
+ {1, 0, 0},
+ {0, 1, 0},
+ {0, 0, 1},
},
}
-
};
#endif
{
#if 0
if (gpio_request(CM3217_POWER_PIN, NULL) != 0) {
- gpio_free(CM3217_POWER_PIN);
- printk("%s: request cm3217 power pin error\n", __func__);
- return -EIO;
+ gpio_free(CM3217_POWER_PIN);
+ printk("%s: request cm3217 power pin error\n", __func__);
+ return -EIO;
}
gpio_pull_updown(CM3217_POWER_PIN, PullDisable);
if (gpio_request(CM3217_IRQ_PIN, NULL) != 0) {
- gpio_free(CM3217_IRQ_PIN);
- printk("%s: request cm3217 int pin error\n", __func__);
- return -EIO;
+ gpio_free(CM3217_IRQ_PIN);
+ printk("%s: request cm3217 int pin error\n", __func__);
+ return -EIO;
}
gpio_pull_updown(CM3217_IRQ_PIN, PullDisable);
#endif
};
#endif
-
-
#ifdef CONFIG_FB_ROCKCHIP
static struct resource resource_fb[] = {
[0] = {
};
static struct platform_device device_fb = {
- .name = "rk-fb",
- .id = -1,
- .num_resources = ARRAY_SIZE(resource_fb),
- .resource = resource_fb,
+ .name = "rk-fb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(resource_fb),
+ .resource = resource_fb,
};
#endif
.gpios = timed_gpios,
};
-struct platform_device rk29_device_vibrator ={
+struct platform_device rk29_device_vibrator = {
.name = "timed-gpio",
.id = -1,
.dev = {
.platform_data = &rk29_vibrator_info,
- },
+ },
};
-#endif
+#endif
#ifdef CONFIG_LEDS_GPIO_PLATFORM
struct gpio_led rk29_leds[] = {
- {
- .name = "button-backlight",
- .gpio = RK30_PIN4_PD7,
- .default_trigger = "timer",
- .active_low = 0,
- .retain_state_suspended = 0,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
+ {
+ .name = "button-backlight",
+ .gpio = RK30_PIN4_PD7,
+ .default_trigger = "timer",
+ .active_low = 0,
+ .retain_state_suspended = 0,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
};
struct gpio_led_platform_data rk29_leds_pdata = {
.leds = &rk29_leds,
- .num_leds = ARRAY_SIZE(rk29_leds),
+ .num_leds = ARRAY_SIZE(rk29_leds),
};
struct platform_device rk29_device_gpio_leds = {
.name = "leds-gpio",
- .id = -1,
+ .id = -1,
.dev = {
- .platform_data = &rk29_leds_pdata,
+ .platform_data = &rk29_leds_pdata,
},
};
#endif
//irda irq pin
ret = gpio_request(IRDA_IRQ_PIN, NULL);
- if(ret != 0)
- {
- gpio_free(IRDA_IRQ_PIN);
- printk(">>>>>> IRDA_IRQ_PIN gpio_request err \n ");
+ if (ret != 0) {
+ gpio_free(IRDA_IRQ_PIN);
+ printk(">>>>>> IRDA_IRQ_PIN gpio_request err \n ");
}
gpio_pull_updown(IRDA_IRQ_PIN, PullDisable);
gpio_direction_input(IRDA_IRQ_PIN);
static struct platform_device irda_device = {
#ifdef CONFIG_RK_IRDA_NET
- .name = "rk_irda",
+ .name = "rk_irda",
#else
- .name = "bu92747_irda",
+ .name = "bu92747_irda",
#endif
- .id = -1,
- .dev = {
- .platform_data = &rk29_irda_info,
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_irda_info,
}
};
#endif
static struct platform_device *devices[] __initdata = {
#ifdef CONFIG_BACKLIGHT_RK29_BL
&rk29_device_backlight,
-#endif
+#endif
#ifdef CONFIG_FB_ROCKCHIP
&device_fb,
#endif
#ifdef CONFIG_I2C0_RK30
static struct i2c_board_info __initdata i2c0_info[] = {
#if defined (CONFIG_GS_MMA8452)
- {
- .type = "gs_mma8452",
- .addr = 0x1c,
- .flags = 0,
- .irq = MMA8452_INT_PIN,
- .platform_data = &mma8452_info,
- },
+ {
+ .type = "gs_mma8452",
+ .addr = 0x1c,
+ .flags = 0,
+ .irq = MMA8452_INT_PIN,
+ .platform_data = &mma8452_info,
+ },
#endif
#if defined (CONFIG_COMPASS_AK8975)
{
- .type = "ak8975",
- .addr = 0x0d,
- .flags = 0,
- .irq = RK30_PIN4_PC1,
- .platform_data = &akm8975_info,
+ .type = "ak8975",
+ .addr = 0x0d,
+ .flags = 0,
+ .irq = RK30_PIN4_PC1,
+ .platform_data = &akm8975_info,
},
#endif
#if defined (CONFIG_GYRO_L3G4200D)
{
- .type = "l3g4200d_gryo",
- .addr = 0x69,
- .flags = 0,
- .irq = L3G4200D_INT_PIN,
- .platform_data = &l3g4200d_info,
+ .type = "l3g4200d_gryo",
+ .addr = 0x69,
+ .flags = 0,
+ .irq = L3G4200D_INT_PIN,
+ .platform_data = &l3g4200d_info,
},
#endif
-
#if defined (CONFIG_SND_SOC_RK1000)
{
- .type = "rk1000_i2c_codec",
- .addr = 0x60,
- .flags = 0,
+ .type = "rk1000_i2c_codec",
+ .addr = 0x60,
+ .flags = 0,
},
{
- .type = "rk1000_control",
- .addr = 0x40,
- .flags = 0,
- },
+ .type = "rk1000_control",
+ .addr = 0x40,
+ .flags = 0,
+ },
#endif
};
#endif
static struct i2c_board_info __initdata i2c1_info[] = {
#if defined (CONFIG_MFD_WM831X_I2C)
{
- .type = "wm8326",
- .addr = 0x36, //0x34 ,is Decided by cs
- .flags = 0,
- .irq = RK30_PIN6_PA4,
- .platform_data = &wm831x_platdata,
+ .type = "wm8326",
+ .addr = 0x36, //0x34 ,is Decided by cs
+ .flags = 0,
+ .irq = RK30_PIN6_PA4,
+ .platform_data = &wm831x_platdata,
},
#endif
};
#ifdef CONFIG_I2C2_RK30
static struct i2c_board_info __initdata i2c2_info[] = {
#if defined (CONFIG_TOUCHSCREEN_GT8XX)
- {
- .type = "Goodix-TS",
- .addr = 0x55,
- .flags =0,
- .irq =RK30_PIN4_PC2,
- .platform_data = &goodix_info,
- },
+ {
+ .type = "Goodix-TS",
+ .addr = 0x55,
+ .flags = 0,
+ .irq = RK30_PIN4_PC2,
+ .platform_data = &goodix_info,
+ },
#endif
#if defined (CONFIG_LS_CM3217)
{
- .type = "lightsensor",
- .addr = 0x20,
- .flags = 0,
- .irq = CM3217_IRQ_PIN,
- .platform_data = &cm3217_info,
+ .type = "lightsensor",
+ .addr = 0x20,
+ .flags = 0,
+ .irq = CM3217_IRQ_PIN,
+ .platform_data = &cm3217_info,
},
#endif
-
};
#endif
}
//end of i2c
-
/**************************************************************************************************
* SDMMC devices, include the module of SD,MMC,and sdio.noted by xbw at 2012-03-05
**************************************************************************************************/
#include "board-rk30-sdk-sdmmc.c"
#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
-#define SDMMC0_WRITE_PROTECT_PIN RK30_PIN3_PB7 //According to your own project to set the value of write-protect-pin.
+#define SDMMC0_WRITE_PROTECT_PIN RK30_PIN3_PB7 //According to your own project to set the value of write-protect-pin.
#endif
#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
-#define SDMMC1_WRITE_PROTECT_PIN RK30_PIN3_PC7 //According to your own project to set the value of write-protect-pin.
+#define SDMMC1_WRITE_PROTECT_PIN RK30_PIN3_PC7 //According to your own project to set the value of write-protect-pin.
#endif
#define RK29SDK_WIFI_SDIO_CARD_DETECT_N RK30_PIN6_PB2
#endif //endif ---#ifdef CONFIG_SDMMC_RK29
-
#ifdef CONFIG_SDMMC0_RK29
static int rk29_sdmmc0_cfg_gpio(void)
{
-#ifdef CONFIG_SDMMC_RK29_OLD
- rk30_mux_api_set(GPIO3B1_SDMMC0CMD_NAME, GPIO3B_SDMMC0_CMD);
- rk30_mux_api_set(GPIO3B0_SDMMC0CLKOUT_NAME, GPIO3B_SDMMC0_CLKOUT);
- rk30_mux_api_set(GPIO3B2_SDMMC0DATA0_NAME, GPIO3B_SDMMC0_DATA0);
- rk30_mux_api_set(GPIO3B3_SDMMC0DATA1_NAME, GPIO3B_SDMMC0_DATA1);
- rk30_mux_api_set(GPIO3B4_SDMMC0DATA2_NAME, GPIO3B_SDMMC0_DATA2);
- rk30_mux_api_set(GPIO3B5_SDMMC0DATA3_NAME, GPIO3B_SDMMC0_DATA3);
-
+#ifdef CONFIG_SDMMC_RK29_OLD
+ rk30_mux_api_set(GPIO3B1_SDMMC0CMD_NAME, GPIO3B_SDMMC0_CMD);
+ rk30_mux_api_set(GPIO3B0_SDMMC0CLKOUT_NAME, GPIO3B_SDMMC0_CLKOUT);
+ rk30_mux_api_set(GPIO3B2_SDMMC0DATA0_NAME, GPIO3B_SDMMC0_DATA0);
+ rk30_mux_api_set(GPIO3B3_SDMMC0DATA1_NAME, GPIO3B_SDMMC0_DATA1);
+ rk30_mux_api_set(GPIO3B4_SDMMC0DATA2_NAME, GPIO3B_SDMMC0_DATA2);
+ rk30_mux_api_set(GPIO3B5_SDMMC0DATA3_NAME, GPIO3B_SDMMC0_DATA3);
+
rk30_mux_api_set(GPIO3B6_SDMMC0DETECTN_NAME, GPIO3B_GPIO3B6);
- rk30_mux_api_set(GPIO3A7_SDMMC0PWREN_NAME, GPIO3A_GPIO3A7);
- gpio_request(RK30_PIN3_PA7,"sdmmc-power");
- gpio_direction_output(RK30_PIN3_PA7,GPIO_LOW);
-
+ rk30_mux_api_set(GPIO3A7_SDMMC0PWREN_NAME, GPIO3A_GPIO3A7);
+ gpio_request(RK30_PIN3_PA7, "sdmmc-power");
+ gpio_direction_output(RK30_PIN3_PA7, GPIO_LOW);
+
#else
- rk29_sdmmc_set_iomux(0, 0xFFFF);
-
+ rk29_sdmmc_set_iomux(0, 0xFFFF);
+
rk30_mux_api_set(GPIO3B6_SDMMC0DETECTN_NAME, GPIO3B_SDMMC0_DETECT_N);
- #if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
- gpio_request(SDMMC0_WRITE_PROTECT_PIN,"sdmmc-wp");
- gpio_direction_input(SDMMC0_WRITE_PROTECT_PIN);
- #endif
+#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
+ gpio_request(SDMMC0_WRITE_PROTECT_PIN, "sdmmc-wp");
+ gpio_direction_input(SDMMC0_WRITE_PROTECT_PIN);
+#endif
#endif
#define CONFIG_SDMMC0_USE_DMA
struct rk29_sdmmc_platform_data default_sdmmc0_data = {
- .host_ocr_avail = (MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
- MMC_VDD_30_31|MMC_VDD_31_32|MMC_VDD_32_33|
- MMC_VDD_33_34|MMC_VDD_34_35| MMC_VDD_35_36),
- .host_caps = (MMC_CAP_4_BIT_DATA|MMC_CAP_MMC_HIGHSPEED|MMC_CAP_SD_HIGHSPEED),
+ .host_ocr_avail =
+ (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
+ MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
+ MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36),
+ .host_caps =
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
.io_init = rk29_sdmmc0_cfg_gpio,
-
-#if !defined(CONFIG_SDMMC_RK29_OLD)
+
+#if !defined(CONFIG_SDMMC_RK29_OLD)
.set_iomux = rk29_sdmmc_set_iomux,
#endif
.dma_name = "sd_mmc",
#ifdef CONFIG_SDMMC0_USE_DMA
- .use_dma = 1,
+ .use_dma = 1,
#else
.use_dma = 0,
#endif
- .detect_irq = RK30_PIN3_PB6, // INVALID_GPIO
+ .detect_irq = RK30_PIN3_PB6, // INVALID_GPIO
.enable_sd_wakeup = 0,
#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
- .write_prt = SDMMC0_WRITE_PROTECT_PIN,
+ .write_prt = SDMMC0_WRITE_PROTECT_PIN,
#else
- .write_prt = INVALID_GPIO,
+ .write_prt = INVALID_GPIO,
#endif
};
-#endif//endif--#ifdef CONFIG_SDMMC0_RK29
+#endif // CONFIG_SDMMC0_RK29
#ifdef CONFIG_SDMMC1_RK29
#define CONFIG_SDMMC1_USE_DMA
{
#if defined(CONFIG_SDMMC_RK29_OLD)
rk30_mux_api_set(GPIO3C0_SMMC1CMD_NAME, GPIO3C_SMMC1_CMD);
- rk30_mux_api_set(GPIO3C5_SDMMC1CLKOUT_NAME, GPIO3C_SDMMC1_CLKOUT);
- rk30_mux_api_set(GPIO3C1_SDMMC1DATA0_NAME, GPIO3C_SDMMC1_DATA0);
- rk30_mux_api_set(GPIO3C2_SDMMC1DATA1_NAME, GPIO3C_SDMMC1_DATA1);
- rk30_mux_api_set(GPIO3C3_SDMMC1DATA2_NAME, GPIO3C_SDMMC1_DATA2);
- rk30_mux_api_set(GPIO3C4_SDMMC1DATA3_NAME, GPIO3C_SDMMC1_DATA3);
+ rk30_mux_api_set(GPIO3C5_SDMMC1CLKOUT_NAME, GPIO3C_SDMMC1_CLKOUT);
+ rk30_mux_api_set(GPIO3C1_SDMMC1DATA0_NAME, GPIO3C_SDMMC1_DATA0);
+ rk30_mux_api_set(GPIO3C2_SDMMC1DATA1_NAME, GPIO3C_SDMMC1_DATA1);
+ rk30_mux_api_set(GPIO3C3_SDMMC1DATA2_NAME, GPIO3C_SDMMC1_DATA2);
+ rk30_mux_api_set(GPIO3C4_SDMMC1DATA3_NAME, GPIO3C_SDMMC1_DATA3);
//rk30_mux_api_set(GPIO3C6_SDMMC1DETECTN_NAME, GPIO3C_SDMMC1_DETECT_N);
#else
#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
- gpio_request(SDMMC1_WRITE_PROTECT_PIN,"sdio-wp");
- gpio_direction_input(SDMMC1_WRITE_PROTECT_PIN);
+ gpio_request(SDMMC1_WRITE_PROTECT_PIN, "sdio-wp");
+ gpio_direction_input(SDMMC1_WRITE_PROTECT_PIN);
#endif
#endif
return 0;
}
-
struct rk29_sdmmc_platform_data default_sdmmc1_data = {
- .host_ocr_avail = (MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28|MMC_VDD_28_29|
- MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32|
- MMC_VDD_32_33|MMC_VDD_33_34),
-
-#if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
- .host_caps = (MMC_CAP_4_BIT_DATA|MMC_CAP_SDIO_IRQ|
- MMC_CAP_MMC_HIGHSPEED|MMC_CAP_SD_HIGHSPEED),
+ .host_ocr_avail =
+ (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
+ MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
+ MMC_VDD_33_34),
+
+#if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
+ .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
#else
- .host_caps = (MMC_CAP_4_BIT_DATA|MMC_CAP_MMC_HIGHSPEED|MMC_CAP_SD_HIGHSPEED),
+ .host_caps =
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
#endif
.io_init = rk29_sdmmc1_cfg_gpio,
-
-#if !defined(CONFIG_SDMMC_RK29_OLD)
+
+#if !defined(CONFIG_SDMMC_RK29_OLD)
.set_iomux = rk29_sdmmc_set_iomux,
-#endif
+#endif
.dma_name = "sdio",
#ifdef CONFIG_SDMMC1_USE_DMA
- .use_dma = 1,
+ .use_dma = 1,
#else
.use_dma = 0,
#endif
#if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
#ifdef CONFIG_WIFI_CONTROL_FUNC
- .status = rk29sdk_wifi_status,
- .register_status_notify = rk29sdk_wifi_status_register,
+ .status = rk29sdk_wifi_status,
+ .register_status_notify = rk29sdk_wifi_status_register,
#endif
#if 0
- .detect_irq = RK29SDK_WIFI_SDIO_CARD_DETECT_N,
+ .detect_irq = RK29SDK_WIFI_SDIO_CARD_DETECT_N,
#endif
#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
- .write_prt = SDMMC1_WRITE_PROTECT_PIN,
+ .write_prt = SDMMC1_WRITE_PROTECT_PIN,
#else
- .write_prt = INVALID_GPIO,
-#endif
+ .write_prt = INVALID_GPIO,
+#endif
#else
- .detect_irq = INVALID_GPIO,
- .enable_sd_wakeup = 0,
+ .detect_irq = INVALID_GPIO,
+ .enable_sd_wakeup = 0,
#endif
};
static void __init rk30_reserve(void)
{
#ifdef CONFIG_ION
- rk30_ion_pdata.heaps[0].base = board_mem_reserve_add("ion",ION_RESERVE_SIZE);
+ rk30_ion_pdata.heaps[0].base = board_mem_reserve_add("ion", ION_RESERVE_SIZE);
#endif
#ifdef CONFIG_FB_ROCKCHIP
- resource_fb[0].start = board_mem_reserve_add("fb0",RK30_FB0_MEM_SIZE);
+ resource_fb[0].start = board_mem_reserve_add("fb0", RK30_FB0_MEM_SIZE);
resource_fb[0].end = resource_fb[0].start + RK30_FB0_MEM_SIZE - 1;
- resource_fb[1].start = board_mem_reserve_add("ipp buf",RK30_FB0_MEM_SIZE);
+ resource_fb[1].start = board_mem_reserve_add("ipp buf", RK30_FB0_MEM_SIZE);
resource_fb[1].end = resource_fb[1].start + RK30_FB0_MEM_SIZE - 1;
- resource_fb[2].start = board_mem_reserve_add("fb2",RK30_FB0_MEM_SIZE);
- resource_fb[2].end = resource_fb[2].start + RK30_FB0_MEM_SIZE - 1;
+ resource_fb[2].start = board_mem_reserve_add("fb2", RK30_FB0_MEM_SIZE);
+ resource_fb[2].end = resource_fb[2].start + RK30_FB0_MEM_SIZE - 1;
#endif
#ifdef CONFIG_VIDEO_RK29
rk30_camera_request_reserve_mem();
projects / firefly-linux-kernel-4.4.55.git / commitdiff