staging: et131x: improve indenting in et131x_adjust_link()
authorMark Einon <mark.einon@gmail.com>
Thu, 5 Dec 2013 22:37:40 +0000 (22:37 +0000)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 6 Dec 2013 20:55:48 +0000 (12:55 -0800)
Negate some 'if' checks to return early, allowing a large block of code
to be un-indented.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/et131x/et131x.c

index e3a71d3fafccc8dbae119a654953e0dddce5db27..8a30726518a067adc8a3247ec7af93670a576e20 100644 (file)
@@ -3754,97 +3754,99 @@ static void et131x_adjust_link(struct net_device *netdev)
        struct et131x_adapter *adapter = netdev_priv(netdev);
        struct  phy_device *phydev = adapter->phydev;
 
-       if (phydev && phydev->link != adapter->link) {
-               /* Check to see if we are in coma mode and if
-                * so, disable it because we will not be able
-                * to read PHY values until we are out.
-                */
-               if (et1310_in_phy_coma(adapter))
-                       et1310_disable_phy_coma(adapter);
-
-               adapter->link = phydev->link;
-               phy_print_status(phydev);
-
-               if (phydev->link) {
-                       adapter->boot_coma = 20;
-                       if (phydev && phydev->speed == SPEED_10) {
-                               /* NOTE - Is there a way to query this without
-                                * TruePHY?
-                                * && TRU_QueryCoreType(adapter->hTruePhy, 0)==
-                                * EMI_TRUEPHY_A13O) {
-                                */
-                               u16 register18;
-
-                               et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
-                                                &register18);
-                               et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
-                                                register18 | 0x4);
-                               et131x_mii_write(adapter, PHY_INDEX_REG,
-                                                register18 | 0x8402);
-                               et131x_mii_write(adapter, PHY_DATA_REG,
-                                                register18 | 511);
-                               et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
-                                                register18);
-                       }
+       if (!phydev)
+               return;
+       if (phydev->link == adapter->link)
+               return;
 
-                       et1310_config_flow_control(adapter);
+       /* Check to see if we are in coma mode and if
+        * so, disable it because we will not be able
+        * to read PHY values until we are out.
+        */
+       if (et1310_in_phy_coma(adapter))
+               et1310_disable_phy_coma(adapter);
 
-                       if (phydev && phydev->speed == SPEED_1000 &&
-                                       adapter->registry_jumbo_packet > 2048) {
-                               u16 reg;
+       adapter->link = phydev->link;
+       phy_print_status(phydev);
 
-                               et131x_mii_read(adapter, PHY_CONFIG, &reg);
-                               reg &= ~ET_PHY_CONFIG_TX_FIFO_DEPTH;
-                               reg |= ET_PHY_CONFIG_FIFO_DEPTH_32;
-                               et131x_mii_write(adapter, PHY_CONFIG, reg);
-                       }
+       if (phydev->link) {
+               adapter->boot_coma = 20;
+               if (phydev && phydev->speed == SPEED_10) {
+                       /* NOTE - Is there a way to query this without
+                        * TruePHY?
+                        * && TRU_QueryCoreType(adapter->hTruePhy, 0)==
+                        * EMI_TRUEPHY_A13O) {
+                        */
+                       u16 register18;
+
+                       et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
+                                        &register18);
+                       et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
+                                        register18 | 0x4);
+                       et131x_mii_write(adapter, PHY_INDEX_REG,
+                                        register18 | 0x8402);
+                       et131x_mii_write(adapter, PHY_DATA_REG,
+                                        register18 | 511);
+                       et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
+                                        register18);
+               }
 
-                       et131x_set_rx_dma_timer(adapter);
-                       et1310_config_mac_regs2(adapter);
-               } else {
-                       adapter->boot_coma = 0;
+               et1310_config_flow_control(adapter);
 
-                       if (phydev->speed == SPEED_10) {
-                               /* NOTE - Is there a way to query this without
-                                * TruePHY?
-                                * && TRU_QueryCoreType(adapter->hTruePhy, 0) ==
-                                * EMI_TRUEPHY_A13O)
-                                */
-                               u16 register18;
-
-                               et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
-                                                &register18);
-                               et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
-                                                register18 | 0x4);
-                               et131x_mii_write(adapter, PHY_INDEX_REG,
-                                                register18 | 0x8402);
-                               et131x_mii_write(adapter, PHY_DATA_REG,
-                                                register18 | 511);
-                               et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
-                                                register18);
-                       }
+               if (phydev && phydev->speed == SPEED_1000 &&
+                   adapter->registry_jumbo_packet > 2048) {
+                       u16 reg;
 
-                       /* Free the packets being actively sent & stopped */
-                       et131x_free_busy_send_packets(adapter);
+                       et131x_mii_read(adapter, PHY_CONFIG, &reg);
+                       reg &= ~ET_PHY_CONFIG_TX_FIFO_DEPTH;
+                       reg |= ET_PHY_CONFIG_FIFO_DEPTH_32;
+                       et131x_mii_write(adapter, PHY_CONFIG, reg);
+               }
 
-                       /* Re-initialize the send structures */
-                       et131x_init_send(adapter);
+               et131x_set_rx_dma_timer(adapter);
+               et1310_config_mac_regs2(adapter);
+       } else {
+               adapter->boot_coma = 0;
 
-                       /* Bring the device back to the state it was during
-                        * init prior to autonegotiation being complete. This
-                        * way, when we get the auto-neg complete interrupt,
-                        * we can complete init by calling config_mac_regs2.
+               if (phydev->speed == SPEED_10) {
+                       /* NOTE - Is there a way to query this without
+                        * TruePHY?
+                        * && TRU_QueryCoreType(adapter->hTruePhy, 0) ==
+                        * EMI_TRUEPHY_A13O)
                         */
-                       et131x_soft_reset(adapter);
+                       u16 register18;
+
+                       et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
+                                        &register18);
+                       et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
+                                        register18 | 0x4);
+                       et131x_mii_write(adapter, PHY_INDEX_REG,
+                                        register18 | 0x8402);
+                       et131x_mii_write(adapter, PHY_DATA_REG,
+                                        register18 | 511);
+                       et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
+                                        register18);
+               }
 
-                       /* Setup ET1310 as per the documentation */
-                       et131x_adapter_setup(adapter);
+               /* Free the packets being actively sent & stopped */
+               et131x_free_busy_send_packets(adapter);
 
-                       /* perform reset of tx/rx */
-                       et131x_disable_txrx(netdev);
-                       et131x_enable_txrx(netdev);
-               }
+               /* Re-initialize the send structures */
+               et131x_init_send(adapter);
+
+               /* Bring the device back to the state it was during
+                * init prior to autonegotiation being complete. This
+                * way, when we get the auto-neg complete interrupt,
+                * we can complete init by calling config_mac_regs2.
+                */
+               et131x_soft_reset(adapter);
+
+               /* Setup ET1310 as per the documentation */
+               et131x_adapter_setup(adapter);
 
+               /* perform reset of tx/rx */
+               et131x_disable_txrx(netdev);
+               et131x_enable_txrx(netdev);
        }
 }