ide: make ide_transfer_pc() static
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Mon, 13 Oct 2008 19:39:32 +0000 (21:39 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Mon, 13 Oct 2008 19:39:32 +0000 (21:39 +0200)
* Move ->ticks field from struct ide_floppy_obj to ide_drive_t.

* Move idefloppy_transfer_pc() to ide-atapi.c and make
  ide_transfer_pc() use it.

* Always use ide_transfer_pc as a handler in ide_issue_pc().

* Remove no longer used idefloppy_start_pc_transfer(),
  ide*_transfer_pc() and 'handler' argument from ide_issue_pc().

* Make ide_transfer_pc() static.

While at it:

* idefloppy_transfer_pc() -> ide_delayed_transfer_pc()

* IDEFLOPPY_TICKS_DELAY -> IDEFLOPPY_PC_DELAY

* ->ticks -> ->pc_delay

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/ide-atapi.c
drivers/ide/ide-floppy.c
drivers/ide/ide-floppy.h
drivers/ide/ide-tape.c
drivers/scsi/ide-scsi.c
include/linux/ide.h

index b558663418d80e85ce8eb84d5ab428efccf18fc3..2521677e1f487c9a017857f2e398ee0e97aa74f1 100644 (file)
@@ -468,12 +468,22 @@ static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
        return ireason;
 }
 
-ide_startstop_t ide_transfer_pc(ide_drive_t *drive, unsigned int timeout,
-                               ide_expiry_t *expiry)
+static int ide_delayed_transfer_pc(ide_drive_t *drive)
+{
+       /* Send the actual packet */
+       drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12);
+
+       /* Timeout for the packet command */
+       return WAIT_FLOPPY_CMD;
+}
+
+static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 {
        struct ide_atapi_pc *pc = drive->pc;
        ide_hwif_t *hwif = drive->hwif;
        struct request *rq = hwif->hwgroup->rq;
+       ide_expiry_t *expiry;
+       unsigned int timeout;
        ide_startstop_t startstop;
        u8 ireason;
 
@@ -493,6 +503,25 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, unsigned int timeout,
                return ide_do_reset(drive);
        }
 
+       /*
+        * If necessary schedule the packet transfer to occur 'timeout'
+        * miliseconds later in ide_delayed_transfer_pc() after the device
+        * says it's ready for a packet.
+        */
+       if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
+               timeout = drive->pc_delay;
+               expiry = &ide_delayed_transfer_pc;
+       } else {
+               if (drive->scsi) {
+                       timeout = ide_scsi_get_timeout(pc);
+                       expiry = ide_scsi_expiry;
+               } else {
+                       timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
+                                                              : WAIT_TAPE_CMD;
+                       expiry = NULL;
+               }
+       }
+
        /* Set the interrupt routine */
        ide_set_handler(drive, ide_pc_intr, timeout, expiry);
 
@@ -508,10 +537,8 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, unsigned int timeout,
 
        return ide_started;
 }
-EXPORT_SYMBOL_GPL(ide_transfer_pc);
 
-ide_startstop_t ide_issue_pc(ide_drive_t *drive,
-                            ide_handler_t *handler, unsigned int timeout,
+ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
                             ide_expiry_t *expiry)
 {
        struct ide_atapi_pc *pc = drive->pc;
@@ -550,12 +577,12 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive,
 
        /* Issue the packet command */
        if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
-               ide_execute_command(drive, ATA_CMD_PACKET, handler,
+               ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
                                    timeout, NULL);
                return ide_started;
        } else {
                ide_execute_pkt_cmd(drive);
-               return (*handler)(drive);
+               return ide_transfer_pc(drive);
        }
 }
 EXPORT_SYMBOL_GPL(ide_issue_pc);
index 7be3cd5daa9da35daaed2e0d7dda15967ded8fb7..2a34f1ad22841b27ec28594cb3fe7df5b72206b9 100644 (file)
 #define CAPACITY_CURRENT       0x02
 #define CAPACITY_NO_CARTRIDGE  0x03
 
-#define IDEFLOPPY_TICKS_DELAY  HZ/20   /* default delay for ZIP 100 (50ms) */
+/*
+ * The following delay solves a problem with ATAPI Zip 100 drive where BSY bit
+ * was apparently being deasserted before the unit was ready to receive data.
+ */
+#define IDEFLOPPY_PC_DELAY     (HZ/20) /* default delay for ZIP 100 (50ms) */
 
 /* Error code returned in rq->errors to the higher part of the driver. */
 #define        IDEFLOPPY_ERROR_GENERAL         101
@@ -193,51 +197,6 @@ static void ide_floppy_callback(ide_drive_t *drive, int dsc)
        idefloppy_end_request(drive, uptodate, 0);
 }
 
-/*
- * What we have here is a classic case of a top half / bottom half interrupt
- * service routine. In interrupt mode, the device sends an interrupt to signal
- * that it is ready to receive a packet. However, we need to delay about 2-3
- * ticks before issuing the packet or we gets in trouble.
- */
-static int idefloppy_transfer_pc(ide_drive_t *drive)
-{
-       /* Send the actual packet */
-       drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12);
-
-       /* Timeout for the packet command */
-       return WAIT_FLOPPY_CMD;
-}
-
-/*
- * Called as an interrupt (or directly). When the device says it's ready for a
- * packet, we schedule the packet transfer to occur about 2-3 ticks later in
- * transfer_pc.
- */
-static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive)
-{
-       idefloppy_floppy_t *floppy = drive->driver_data;
-       ide_expiry_t *expiry;
-       unsigned int timeout;
-
-       /*
-        * The following delay solves a problem with ATAPI Zip 100 drives
-        * where the Busy flag was apparently being deasserted before the
-        * unit was ready to receive data. This was happening on a
-        * 1200 MHz Athlon system. 10/26/01 25msec is too short,
-        * 40 and 50msec work well. ide_pc_intr will not be actually
-        * used until after the packet is moved in about 50 msec.
-        */
-       if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
-               timeout = floppy->ticks;
-               expiry = &idefloppy_transfer_pc;
-       } else {
-               timeout = WAIT_FLOPPY_CMD;
-               expiry = NULL;
-       }
-
-       return ide_transfer_pc(drive, timeout, expiry);
-}
-
 static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
                                    struct ide_atapi_pc *pc)
 {
@@ -281,8 +240,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
 
        pc->retries++;
 
-       return ide_issue_pc(drive, idefloppy_start_pc_transfer,
-                           WAIT_FLOPPY_CMD, NULL);
+       return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
 }
 
 void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
@@ -597,21 +555,7 @@ static sector_t idefloppy_capacity(ide_drive_t *drive)
 ide_devset_rw_field(bios_cyl, bios_cyl);
 ide_devset_rw_field(bios_head, bios_head);
 ide_devset_rw_field(bios_sect, bios_sect);
-
-static int get_ticks(ide_drive_t *drive)
-{
-       idefloppy_floppy_t *floppy = drive->driver_data;
-       return floppy->ticks;
-}
-
-static int set_ticks(ide_drive_t *drive, int arg)
-{
-       idefloppy_floppy_t *floppy = drive->driver_data;
-       floppy->ticks = arg;
-       return 0;
-}
-
-IDE_DEVSET(ticks, DS_SYNC, get_ticks, set_ticks);
+ide_devset_rw_field(ticks, pc_delay);
 
 static const struct ide_proc_devset idefloppy_settings[] = {
        IDE_PROC_DEVSET(bios_cyl,  0, 1023),
@@ -647,7 +591,7 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
        if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) {
                drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
                /* This value will be visible in the /proc/ide/hdx/settings */
-               floppy->ticks = IDEFLOPPY_TICKS_DELAY;
+               drive->pc_delay = IDEFLOPPY_PC_DELAY;
                blk_queue_max_sectors(drive->queue, 64);
        }
 
index ced5ceb474de7b5311b59543692bdc076be77b3f..00ad5f992dc00f0d71a8e103604160d8c7d32644 100644 (file)
@@ -20,8 +20,7 @@ typedef struct ide_floppy_obj {
 
        /* Last error information */
        u8 sense_key, asc, ascq;
-       /* delay this long before sending packet command */
-       u8 ticks;
+
        int progress_indication;
 
        /* Device information */
index a148de623af01236a8820fde12c2cbf1ed81bc54..622d5fed2dc57aca60e4b001752bcb7b2714c53c 100644 (file)
@@ -654,10 +654,6 @@ static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
  * again, the callback function will be called and then we will handle the next
  * request.
  */
-static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
-{
-       return ide_transfer_pc(drive, WAIT_TAPE_CMD, NULL);
-}
 
 static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
                struct ide_atapi_pc *pc)
@@ -705,7 +701,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
 
        pc->retries++;
 
-       return ide_issue_pc(drive, idetape_transfer_pc, WAIT_TAPE_CMD, NULL);
+       return ide_issue_pc(drive, WAIT_TAPE_CMD, NULL);
 }
 
 /* A mode sense command is used to "sense" tape parameters. */
index 8733fe3492546b9b81c157dd5e974de609e9f4d7..7d3d03f989144cd84011295551c530bf54b91a59 100644 (file)
@@ -270,12 +270,6 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
        return 0;
 }
 
-static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive)
-{
-       return ide_transfer_pc(drive, ide_scsi_get_timeout(drive->pc),
-                              ide_scsi_expiry);
-}
-
 static inline int idescsi_set_direction(struct ide_atapi_pc *pc)
 {
        switch (pc->c[0]) {
@@ -321,8 +315,7 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive,
        /* Set the current packet command */
        drive->pc = pc;
 
-       return ide_issue_pc(drive, idescsi_transfer_pc,
-                           ide_scsi_get_timeout(pc), ide_scsi_expiry);
+       return ide_issue_pc(drive, ide_scsi_get_timeout(pc), ide_scsi_expiry);
 }
 
 /*
index 449a1094700ff1fb61126bc155c71e89900e9dcc..85cb96c1fd6157eb56fd3ce0b1120f2b4e71a644 100644 (file)
@@ -531,6 +531,9 @@ struct ide_drive_s {
        u8      bios_head;      /* BIOS/fdisk/LILO number of heads */
        u8      bios_sect;      /* BIOS/fdisk/LILO sectors per track */
 
+       /* delay this long before sending packet command */
+       u8 pc_delay;
+
        unsigned int    bios_cyl;       /* BIOS/fdisk/LILO number of cyls */
        unsigned int    cyl;            /* "real" number of cyls */
        unsigned int    drive_data;     /* used by set_pio_mode/selectproc */
@@ -1188,9 +1191,7 @@ static inline unsigned long ide_scsi_get_timeout(struct ide_atapi_pc *pc)
 
 int ide_scsi_expiry(ide_drive_t *);
 
-ide_startstop_t ide_transfer_pc(ide_drive_t *, unsigned int, ide_expiry_t *);
-ide_startstop_t ide_issue_pc(ide_drive_t *,
-                            ide_handler_t *, unsigned int, ide_expiry_t *);
+ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int, ide_expiry_t *);
 
 ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);