*/
#include "bcma_private.h"
+#include <linux/slab.h>
#include <linux/bcma/bcma.h>
#include <linux/pci.h>
iowrite32(value, core->bus->mmio + offset);
}
+ #ifdef CONFIG_BCMA_BLOCKIO
+ void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+ {
+ void __iomem *addr = core->bus->mmio + offset;
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ switch (reg_width) {
+ case sizeof(u8):
+ ioread8_rep(addr, buffer, count);
+ break;
+ case sizeof(u16):
+ WARN_ON(count & 1);
+ ioread16_rep(addr, buffer, count >> 1);
+ break;
+ case sizeof(u32):
+ WARN_ON(count & 3);
+ ioread32_rep(addr, buffer, count >> 2);
+ break;
+ default:
+ WARN_ON(1);
+ }
+ }
+
+ void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+ {
+ void __iomem *addr = core->bus->mmio + offset;
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ switch (reg_width) {
+ case sizeof(u8):
+ iowrite8_rep(addr, buffer, count);
+ break;
+ case sizeof(u16):
+ WARN_ON(count & 1);
+ iowrite16_rep(addr, buffer, count >> 1);
+ break;
+ case sizeof(u32):
+ WARN_ON(count & 3);
+ iowrite32_rep(addr, buffer, count >> 2);
+ break;
+ default:
+ WARN_ON(1);
+ }
+ }
+ #endif
+
static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset)
{
if (core->bus->mapped_core != core)
.write8 = bcma_host_pci_write8,
.write16 = bcma_host_pci_write16,
.write32 = bcma_host_pci_write32,
+ #ifdef CONFIG_BCMA_BLOCKIO
+ .block_read = bcma_host_pci_block_read,
+ .block_write = bcma_host_pci_block_write,
+ #endif
.aread32 = bcma_host_pci_aread32,
.awrite32 = bcma_host_pci_awrite32,
};
#include <linux/etherdevice.h>
#include <linux/device.h>
+#include <linux/interrupt.h>
#include <linux/leds.h>
#include <linux/completion.h>
struct ath_txq {
int mac80211_qnum; /* mac80211 queue number, -1 means not mac80211 Q */
u32 axq_qnum; /* ath9k hardware queue number */
- u32 *axq_link;
+ void *axq_link;
struct list_head axq_q;
spinlock_t axq_lock;
u32 axq_depth;
bool axq_tx_inprogress;
struct list_head axq_acq;
struct list_head txq_fifo[ATH_TXFIFO_DEPTH];
- struct list_head txq_fifo_pending;
u8 txq_headidx;
u8 txq_tailidx;
int pending_frames;
void ath_hw_pll_work(struct work_struct *work);
void ath_paprd_calibrate(struct work_struct *work);
void ath_ani_calibrate(unsigned long data);
+ void ath_start_ani(struct ath_common *common);
/**********/
/* BTCOEX */
const struct ath_bus_ops *bus_ops);
void ath9k_deinit_device(struct ath_softc *sc);
void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw);
- int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
- struct ath9k_channel *hchan);
- void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw);
void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw);
- bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode);
bool ath9k_uses_beacons(int type);
#ifdef CONFIG_ATH9K_PCI
module_param_named(pio, b43_modparam_pio, int, 0644);
MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO");
+ #ifdef CONFIG_B43_BCMA
+ static const struct bcma_device_id b43_bcma_tbl[] = {
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x17, BCMA_ANY_CLASS),
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x18, BCMA_ANY_CLASS),
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1D, BCMA_ANY_CLASS),
+ BCMA_CORETABLE_END
+ };
+ MODULE_DEVICE_TABLE(bcma, b43_bcma_tbl);
+ #endif
+
static const struct ssb_device_id b43_ssb_tbl[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 6),
{
u32 low, high;
- B43_WARN_ON(dev->sdev->id.revision < 3);
+ B43_WARN_ON(dev->dev->core_rev < 3);
/* The hardware guarantees us an atomic read, if we
* read the low register first. */
{
u32 low, high;
- B43_WARN_ON(dev->sdev->id.revision < 3);
+ B43_WARN_ON(dev->dev->core_rev < 3);
low = tsf;
high = (tsf >> 32);
b43_ram_write(dev, i * 4, buffer[i]);
b43_write16(dev, 0x0568, 0x0000);
- if (dev->sdev->id.revision < 11)
+ if (dev->dev->core_rev < 11)
b43_write16(dev, 0x07C0, 0x0000);
else
b43_write16(dev, 0x07C0, 0x0100);
b43_write32(dev, B43_MMIO_MACCTL, macctl);
/* Commit write */
b43_read32(dev, B43_MMIO_MACCTL);
- if (awake && dev->sdev->id.revision >= 5) {
+ if (awake && dev->dev->core_rev >= 5) {
/* Wait for the microcode to wake up. */
for (i = 0; i < 100; i++) {
ucstat = b43_shm_read16(dev, B43_SHM_SHARED,
}
}
- static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, u32 flags)
+ static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, bool gmode)
{
+ struct ssb_device *sdev = dev->dev->sdev;
u32 tmslow;
+ u32 flags = 0;
+ if (gmode)
+ flags |= B43_TMSLOW_GMODE;
flags |= B43_TMSLOW_PHYCLKEN;
flags |= B43_TMSLOW_PHYRESET;
if (dev->phy.type == B43_PHYTYPE_N)
flags |= B43_TMSLOW_PHY_BANDWIDTH_20MHZ; /* Make 20 MHz def */
- ssb_device_enable(dev->sdev, flags);
+ b43_device_enable(dev, flags);
msleep(2); /* Wait for the PLL to turn on. */
/* Now take the PHY out of Reset again */
- tmslow = ssb_read32(dev->sdev, SSB_TMSLOW);
+ tmslow = ssb_read32(sdev, SSB_TMSLOW);
tmslow |= SSB_TMSLOW_FGC;
tmslow &= ~B43_TMSLOW_PHYRESET;
- ssb_write32(dev->sdev, SSB_TMSLOW, tmslow);
- ssb_read32(dev->sdev, SSB_TMSLOW); /* flush */
+ ssb_write32(sdev, SSB_TMSLOW, tmslow);
+ ssb_read32(sdev, SSB_TMSLOW); /* flush */
msleep(1);
tmslow &= ~SSB_TMSLOW_FGC;
- ssb_write32(dev->sdev, SSB_TMSLOW, tmslow);
- ssb_read32(dev->sdev, SSB_TMSLOW); /* flush */
+ ssb_write32(sdev, SSB_TMSLOW, tmslow);
+ ssb_read32(sdev, SSB_TMSLOW); /* flush */
msleep(1);
}
- void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
+ void b43_wireless_core_reset(struct b43_wldev *dev, bool gmode)
{
u32 macctl;
- b43_ssb_wireless_core_reset(dev, flags);
+ b43_ssb_wireless_core_reset(dev, gmode);
/* Turn Analog ON, but only if we already know the PHY-type.
* This protects against very early setup where we don't know the
macctl = b43_read32(dev, B43_MMIO_MACCTL);
macctl &= ~B43_MACCTL_GMODE;
- if (flags & B43_TMSLOW_GMODE)
+ if (gmode)
macctl |= B43_MACCTL_GMODE;
macctl |= B43_MACCTL_IHR_ENABLED;
b43_write32(dev, B43_MMIO_MACCTL, macctl);
{
u32 dummy;
- if (dev->sdev->id.revision < 5)
+ if (dev->dev->core_rev < 5)
return;
/* Read all entries from the microcode TXstatus FIFO
* and throw them away.
/* Get the mask of available antennas. */
if (dev->phy.gmode)
- antenna_mask = dev->sdev->bus->sprom.ant_available_bg;
+ antenna_mask = dev->dev->bus_sprom->ant_available_bg;
else
- antenna_mask = dev->sdev->bus->sprom.ant_available_a;
+ antenna_mask = dev->dev->bus_sprom->ant_available_a;
if (!(antenna_mask & (1 << (antenna_nr - 1)))) {
/* This antenna is not available. Fall back to default. */
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
- if (dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO) {
+ if (b43_bus_host_is_sdio(dev->dev)) {
/* wl->mutex is enough. */
b43_do_beacon_update_trigger_work(dev);
mmiowb();
static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int)
{
b43_time_lock(dev);
- if (dev->sdev->id.revision >= 3) {
+ if (dev->dev->core_rev >= 3) {
b43_write32(dev, B43_MMIO_TSF_CFP_REP, (beacon_int << 16));
b43_write32(dev, B43_MMIO_TSF_CFP_START, (beacon_int << 10));
} else {
B43_WARN_ON(1);
return -ENOSYS;
}
- err = request_firmware(&blob, ctx->fwname, ctx->dev->sdev->dev);
+ err = request_firmware(&blob, ctx->fwname, ctx->dev->dev->dev);
if (err == -ENOENT) {
snprintf(ctx->errors[ctx->req_type],
sizeof(ctx->errors[ctx->req_type]),
{
struct b43_wldev *dev = ctx->dev;
struct b43_firmware *fw = &ctx->dev->fw;
- const u8 rev = ctx->dev->sdev->id.revision;
+ const u8 rev = ctx->dev->dev->core_rev;
const char *filename;
u32 tmshigh;
int err;
switch (dev->phy.type) {
case B43_PHYTYPE_A:
if ((rev >= 5) && (rev <= 10)) {
- tmshigh = ssb_read32(dev->sdev, SSB_TMSHIGH);
+ tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
filename = "a0g1initvals5";
else
switch (dev->phy.type) {
case B43_PHYTYPE_A:
if ((rev >= 5) && (rev <= 10)) {
- tmshigh = ssb_read32(dev->sdev, SSB_TMSHIGH);
+ tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
filename = "a0g1bsinitvals5";
else
snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u",
dev->fw.rev, dev->fw.patch);
- wiphy->hw_version = dev->sdev->id.coreid;
+ wiphy->hw_version = dev->dev->core_id;
if (b43_is_old_txhdr_format(dev)) {
/* We're over the deadline, but we keep support for old fw
*/
static struct ssb_device *b43_ssb_gpio_dev(struct b43_wldev *dev)
{
- struct ssb_bus *bus = dev->sdev->bus;
+ struct ssb_bus *bus = dev->dev->sdev->bus;
#ifdef CONFIG_SSB_DRIVER_PCICORE
return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
mask = 0x0000001F;
set = 0x0000000F;
- if (dev->sdev->bus->chip_id == 0x4301) {
+ if (dev->dev->chip_id == 0x4301) {
mask |= 0x0060;
set |= 0x0060;
}
mask |= 0x0180;
set |= 0x0180;
}
- if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) {
+ if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) {
b43_write16(dev, B43_MMIO_GPIO_MASK,
b43_read16(dev, B43_MMIO_GPIO_MASK)
| 0x0200);
mask |= 0x0200;
set |= 0x0200;
}
- if (dev->sdev->id.revision >= 2)
+ if (dev->dev->core_rev >= 2)
mask |= 0x0010; /* FIXME: This is redundant. */
gpiodev = b43_ssb_gpio_dev(dev);
/* Workaround: On old hardware the HW-MAC-address-filter
* doesn't work properly, so always run promisc in filter
* it in software. */
- if (dev->sdev->id.revision <= 4)
+ if (dev->dev->core_rev <= 4)
ctl |= B43_MACCTL_PROMISC;
b43_write32(dev, B43_MMIO_MACCTL, ctl);
cfp_pretbtt = 2;
if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) {
- if (dev->sdev->bus->chip_id == 0x4306 &&
- dev->sdev->bus->chip_rev == 3)
+ if (dev->dev->chip_id == 0x4306 &&
+ dev->dev->chip_rev == 3)
cfp_pretbtt = 100;
else
cfp_pretbtt = 50;
b43_write16(dev, 0x005E, value16);
}
b43_write32(dev, 0x0100, 0x01000000);
- if (dev->sdev->id.revision < 5)
+ if (dev->dev->core_rev < 5)
b43_write32(dev, 0x010C, 0x01000000);
b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
/* Initially set the wireless operation mode. */
b43_adjust_opmode(dev);
- if (dev->sdev->id.revision < 3) {
+ if (dev->dev->core_rev < 3) {
b43_write16(dev, 0x060E, 0x0000);
b43_write16(dev, 0x0610, 0x8000);
b43_write16(dev, 0x0604, 0x0000);
b43_shm_write32(dev, B43_SHM_SHARED, 0, backup0);
b43_shm_write32(dev, B43_SHM_SHARED, 4, backup4);
- if ((dev->sdev->id.revision >= 3) && (dev->sdev->id.revision <= 10)) {
+ if ((dev->dev->core_rev >= 3) && (dev->dev->core_rev <= 10)) {
/* The 32bit register shadows the two 16bit registers
* with update sideeffects. Validate this. */
b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA);
/* Disable interrupts on the device. */
b43_set_status(dev, B43_STAT_INITIALIZED);
- if (dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO) {
+ if (b43_bus_host_is_sdio(dev->dev)) {
/* wl->mutex is locked. That is enough. */
b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */
/* Synchronize and free the interrupt handlers. Unlock to avoid deadlocks. */
orig_dev = dev;
mutex_unlock(&wl->mutex);
- if (dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO) {
+ if (b43_bus_host_is_sdio(dev->dev)) {
b43_sdio_free_irq(dev);
} else {
- synchronize_irq(dev->sdev->irq);
- free_irq(dev->sdev->irq, dev);
+ synchronize_irq(dev->dev->irq);
+ free_irq(dev->dev->irq, dev);
}
mutex_lock(&wl->mutex);
dev = wl->current_dev;
B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED);
drain_txstatus_queue(dev);
- if (dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO) {
+ if (b43_bus_host_is_sdio(dev->dev)) {
err = b43_sdio_request_irq(dev, b43_sdio_interrupt_handler);
if (err) {
b43err(dev->wl, "Cannot request SDIO IRQ\n");
goto out;
}
} else {
- err = request_threaded_irq(dev->sdev->irq, b43_interrupt_handler,
+ err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler,
b43_interrupt_thread_handler,
IRQF_SHARED, KBUILD_MODNAME, dev);
if (err) {
b43err(dev->wl, "Cannot request IRQ-%d\n",
- dev->sdev->irq);
+ dev->dev->irq);
goto out;
}
}
#endif
default:
unsupported = 1;
- };
+ }
if (unsupported) {
b43err(dev->wl, "FOUND UNSUPPORTED PHY "
"(Analog %u, Type %u, Revision %u)\n",
analog_type, phy_type, phy_rev);
/* Get RADIO versioning */
- if (dev->sdev->bus->chip_id == 0x4317) {
- if (dev->sdev->bus->chip_rev == 0)
+ if (dev->dev->chip_id == 0x4317) {
+ if (dev->dev->chip_rev == 0)
tmp = 0x3205017F;
- else if (dev->sdev->bus->chip_rev == 1)
+ else if (dev->dev->chip_rev == 1)
tmp = 0x4205017F;
else
tmp = 0x5205017F;
static void b43_bluetooth_coext_enable(struct b43_wldev *dev)
{
- struct ssb_sprom *sprom = &dev->sdev->bus->sprom;
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
u64 hf;
if (!modparam_btcoex)
static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
{
- struct ssb_bus *bus = dev->sdev->bus;
+ struct ssb_bus *bus;
u32 tmp;
+ if (dev->dev->bus_type != B43_BUS_SSB)
+ return;
+
+ bus = dev->dev->sdev->bus;
+
if ((bus->chip_id == 0x4311 && bus->chip_rev == 2) ||
(bus->chip_id == 0x4312)) {
- tmp = ssb_read32(dev->sdev, SSB_IMCFGLO);
+ tmp = ssb_read32(dev->dev->sdev, SSB_IMCFGLO);
tmp &= ~SSB_IMCFGLO_REQTO;
tmp &= ~SSB_IMCFGLO_SERTO;
tmp |= 0x3;
- ssb_write32(dev->sdev, SSB_IMCFGLO, tmp);
+ ssb_write32(dev->dev->sdev, SSB_IMCFGLO, tmp);
ssb_commit_settings(bus);
}
}
dev->wl->current_beacon = NULL;
}
- ssb_device_disable(dev->sdev, 0);
- ssb_bus_may_powerdown(dev->sdev->bus);
+ b43_device_disable(dev, 0);
+ b43_bus_may_powerdown(dev);
}
/* Initialize a wireless core */
static int b43_wireless_core_init(struct b43_wldev *dev)
{
struct ssb_bus *bus = dev->sdev->bus;
- struct ssb_sprom *sprom = &bus->sprom;
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
struct b43_phy *phy = &dev->phy;
int err;
u64 hf;
- u32 tmp;
B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
- err = ssb_bus_powerup(bus, 0);
+ err = b43_bus_powerup(dev, 0);
if (err)
goto out;
- if (!ssb_device_is_enabled(dev->sdev)) {
- tmp = phy->gmode ? B43_TMSLOW_GMODE : 0;
- b43_wireless_core_reset(dev, tmp);
- }
+ if (!b43_device_is_enabled(dev))
+ b43_wireless_core_reset(dev, phy->gmode);
/* Reset all data structures. */
setup_struct_wldev_for_init(dev);
if (err)
goto err_busdown;
b43_shm_write16(dev, B43_SHM_SHARED,
- B43_SHM_SH_WLCOREREV, dev->sdev->id.revision);
+ B43_SHM_SH_WLCOREREV, dev->dev->core_rev);
hf = b43_hf_read(dev);
if (phy->type == B43_PHYTYPE_G) {
hf |= B43_HF_SYMW;
/* Maximum Contention Window */
b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF);
- if ((dev->sdev->bus->bustype == SSB_BUSTYPE_PCMCIA) ||
- (dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO) ||
+ if (b43_bus_host_is_pcmcia(dev->dev) ||
+ b43_bus_host_is_sdio(dev->dev) ||
dev->use_pio) {
dev->__using_pio_transfers = 1;
err = b43_pio_init(dev);
b43_set_synth_pu_delay(dev, 1);
b43_bluetooth_coext_enable(dev);
- ssb_bus_powerup(bus, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW));
+ b43_bus_powerup(dev, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW));
b43_upload_card_macaddress(dev);
b43_security_init(dev);
err_chip_exit:
b43_chip_exit(dev);
err_busdown:
- ssb_bus_may_powerdown(bus);
+ b43_bus_may_powerdown(dev);
B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
return err;
}
struct pci_dev *pdev = (bus->bustype == SSB_BUSTYPE_PCI) ? bus->host_pci : NULL;
int err;
bool have_2ghz_phy = 0, have_5ghz_phy = 0;
- u32 tmp;
/* Do NOT do any device initialization here.
* Do it in wireless_core_init() instead.
* that in core_init(), too.
*/
- err = ssb_bus_powerup(bus, 0);
+ err = b43_bus_powerup(dev, 0);
if (err) {
b43err(wl, "Bus powerup failed\n");
goto out;
}
/* Get the PHY type. */
- if (dev->sdev->id.revision >= 5) {
+ if (dev->dev->core_rev >= 5) {
u32 tmshigh;
tmshigh = ssb_read32(dev->sdev, SSB_TMSHIGH);
dev->phy.gmode = have_2ghz_phy;
dev->phy.radio_on = 1;
- tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
- b43_wireless_core_reset(dev, tmp);
+ b43_wireless_core_reset(dev, dev->phy.gmode);
err = b43_phy_versioning(dev);
if (err)
goto err_powerdown;
dev->phy.gmode = have_2ghz_phy;
- tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
- b43_wireless_core_reset(dev, tmp);
+ b43_wireless_core_reset(dev, dev->phy.gmode);
err = b43_validate_chipaccess(dev);
if (err)
INIT_WORK(&dev->restart_work, b43_chip_reset);
dev->phy.ops->switch_analog(dev, 0);
- ssb_device_disable(dev->sdev, 0);
- ssb_bus_may_powerdown(bus);
+ b43_device_disable(dev, 0);
+ b43_bus_may_powerdown(dev);
out:
return err;
err_phy_free:
b43_phy_free(dev);
err_powerdown:
- ssb_bus_may_powerdown(bus);
+ b43_bus_may_powerdown(dev);
return err;
}
- static void b43_one_core_detach(struct ssb_device *dev)
+ static void b43_one_core_detach(struct b43_bus_dev *dev)
{
struct b43_wldev *wldev;
struct b43_wl *wl;
/* Do not cancel ieee80211-workqueue based work here.
* See comment in b43_remove(). */
- wldev = ssb_get_drvdata(dev);
+ wldev = ssb_get_drvdata(dev->sdev);
wl = wldev->wl;
b43_debugfs_remove_device(wldev);
b43_wireless_core_detach(wldev);
list_del(&wldev->list);
wl->nr_devs--;
- ssb_set_drvdata(dev, NULL);
+ ssb_set_drvdata(dev->sdev, NULL);
kfree(wldev);
}
- static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl)
+ static int b43_one_core_attach(struct b43_bus_dev *dev, struct b43_wl *wl)
{
struct b43_wldev *wldev;
int err = -ENOMEM;
goto out;
wldev->use_pio = b43_modparam_pio;
- wldev->sdev = dev;
+ wldev->dev = dev;
+ wldev->sdev = dev->sdev; /* TODO: Remove when not needed */
wldev->wl = wl;
b43_set_status(wldev, B43_STAT_UNINIT);
wldev->bad_frames_preempt = modparam_bad_frames_preempt;
list_add(&wldev->list, &wl->devlist);
wl->nr_devs++;
- ssb_set_drvdata(dev, wldev);
+ ssb_set_drvdata(dev->sdev, wldev);
b43_debugfs_add_device(wldev);
out:
}
}
- static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl)
+ static void b43_wireless_exit(struct b43_bus_dev *dev, struct b43_wl *wl)
{
struct ieee80211_hw *hw = wl->hw;
- ssb_set_devtypedata(dev, NULL);
+ ssb_set_devtypedata(dev->sdev, NULL);
ieee80211_free_hw(hw);
}
return wl;
}
- static int b43_ssb_probe(struct ssb_device *dev, const struct ssb_device_id *id)
+ #ifdef CONFIG_B43_BCMA
+ static int b43_bcma_probe(struct bcma_device *core)
+ {
+ b43err(NULL, "BCMA is not supported yet!");
+ return -EOPNOTSUPP;
+ }
+
+ static void b43_bcma_remove(struct bcma_device *core)
+ {
+ /* TODO */
+ }
+
+ static struct bcma_driver b43_bcma_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = b43_bcma_tbl,
+ .probe = b43_bcma_probe,
+ .remove = b43_bcma_remove,
+ };
+ #endif
+
+ static
+ int b43_ssb_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
{
+ struct b43_bus_dev *dev;
struct b43_wl *wl;
int err;
int first = 0;
- wl = ssb_get_devtypedata(dev);
+ dev = b43_bus_dev_ssb_init(sdev);
+
+ wl = ssb_get_devtypedata(sdev);
if (!wl) {
/* Probing the first core. Must setup common struct b43_wl */
first = 1;
- b43_sprom_fixup(dev->bus);
- wl = b43_wireless_init(dev);
+ b43_sprom_fixup(sdev->bus);
+ wl = b43_wireless_init(sdev);
if (IS_ERR(wl)) {
err = PTR_ERR(wl);
goto out;
}
- ssb_set_devtypedata(dev, wl);
- B43_WARN_ON(ssb_get_devtypedata(dev) != wl);
+ ssb_set_devtypedata(sdev, wl);
+ B43_WARN_ON(ssb_get_devtypedata(sdev) != wl);
}
err = b43_one_core_attach(dev, wl);
if (err)
return err;
}
- static void b43_ssb_remove(struct ssb_device *dev)
+ static void b43_ssb_remove(struct ssb_device *sdev)
{
- struct b43_wl *wl = ssb_get_devtypedata(dev);
- struct b43_wldev *wldev = ssb_get_drvdata(dev);
+ struct b43_wl *wl = ssb_get_devtypedata(sdev);
+ struct b43_wldev *wldev = ssb_get_drvdata(sdev);
/* We must cancel any work here before unregistering from ieee80211,
* as the ieee80211 unreg will destroy the workqueue. */
ieee80211_unregister_hw(wl->hw);
}
- b43_one_core_detach(dev);
+ b43_one_core_detach(wldev->dev);
if (list_empty(&wl->devlist)) {
b43_leds_unregister(wl);
/* Last core on the chip unregistered.
* We can destroy common struct b43_wl.
*/
- b43_wireless_exit(dev, wl);
+ b43_wireless_exit(wldev->dev, wl);
}
}
err = b43_sdio_init();
if (err)
goto err_pcmcia_exit;
- err = ssb_driver_register(&b43_ssb_driver);
+ #ifdef CONFIG_B43_BCMA
+ err = bcma_driver_register(&b43_bcma_driver);
if (err)
goto err_sdio_exit;
+ #endif
+ err = ssb_driver_register(&b43_ssb_driver);
+ if (err)
+ goto err_bcma_driver_exit;
b43_print_driverinfo();
return err;
+ err_bcma_driver_exit:
+ #ifdef CONFIG_B43_BCMA
+ bcma_driver_unregister(&b43_bcma_driver);
err_sdio_exit:
+ #endif
b43_sdio_exit();
err_pcmcia_exit:
b43_pcmcia_exit();
static void __exit b43_exit(void)
{
ssb_driver_unregister(&b43_ssb_driver);
+ #ifdef CONFIG_B43_BCMA
+ bcma_driver_unregister(&b43_bcma_driver);
+ #endif
b43_sdio_exit();
b43_pcmcia_exit();
b43_debugfs_exit();
struct b43legacy_firmware *fw = &dev->fw;
const u8 rev = dev->dev->id.revision;
const char *filename;
- u32 tmshigh;
int err;
- tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH);
+ /* do dummy read */
+ ssb_read32(dev->dev, SSB_TMSHIGH);
if (!fw->ucode) {
if (rev == 2)
filename = "ucode2";
unsigned long flags;
unsigned int new_phymode = 0xFFFF;
int antenna_tx;
- int antenna_rx;
int err = 0;
antenna_tx = B43legacy_ANTENNA_DEFAULT;
- antenna_rx = B43legacy_ANTENNA_DEFAULT;
mutex_lock(&wl->mutex);
dev = wl->current_dev;
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev;
- struct b43legacy_phy *phy;
unsigned long flags;
mutex_lock(&wl->mutex);
B43legacy_WARN_ON(wl->vif != vif);
dev = wl->current_dev;
- phy = &dev->phy;
/* Disable IRQs while reconfiguring the device.
* This makes it possible to drop the spinlock throughout
break;
default:
unsupported = 1;
- };
+ }
if (unsupported) {
b43legacyerr(dev->wl, "FOUND UNSUPPORTED PHY "
"(Analog %u, Type %u, Revision %u)\n",
#ifndef __iwl_dev_h__
#define __iwl_dev_h__
+#include <linux/interrupt.h>
#include <linux/pci.h> /* for struct pci_device_id */
#include <linux/kernel.h>
#include <linux/wait.h>
#endif
};
- /*
- * iwl_switch_rxon: "channel switch" structure
- *
- * @ switch_in_progress: channel switch in progress
- * @ channel: new channel
- */
- struct iwl_switch_rxon {
- bool switch_in_progress;
- __le16 channel;
- };
-
/*
* schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
* to perform continuous uCode event logging operation if enabled
struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
- struct iwl_switch_rxon switch_rxon;
+ __le16 switch_channel;
struct {
u32 error_event_table;
return -EBUSY;
if (rt2x00_is_pci(rt2x00dev)) {
- if (rt2x00_rt(rt2x00dev, RT5390)) {
+ if (rt2x00_rt(rt2x00dev, RT3572) ||
+ rt2x00_rt(rt2x00dev, RT5390)) {
rt2800_register_read(rt2x00dev, AUX_CTRL, ®);
rt2x00_set_field32(®, AUX_CTRL_FORCE_PCIE_CLK, 1);
rt2x00_set_field32(®, AUX_CTRL_WAKE_PCIE_EN, 1);
}
EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
- static bool rt2800_txdone_entry_check(struct queue_entry *entry, u32 reg)
- {
- __le32 *txwi;
- u32 word;
- int wcid, ack, pid;
- int tx_wcid, tx_ack, tx_pid;
-
- wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
- ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
- pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
-
- /*
- * This frames has returned with an IO error,
- * so the status report is not intended for this
- * frame.
- */
- if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) {
- rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
- return false;
- }
-
- /*
- * Validate if this TX status report is intended for
- * this entry by comparing the WCID/ACK/PID fields.
- */
- txwi = rt2800_drv_get_txwi(entry);
-
- rt2x00_desc_read(txwi, 1, &word);
- tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
- tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK);
- tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID);
-
- if ((wcid != tx_wcid) || (ack != tx_ack) || (pid != tx_pid)) {
- WARNING(entry->queue->rt2x00dev,
- "TX status report missed for queue %d entry %d\n",
- entry->queue->qid, entry->entry_idx);
- rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN);
- return false;
- }
-
- return true;
- }
-
void rt2800_txdone_entry(struct queue_entry *entry, u32 status)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
}
EXPORT_SYMBOL_GPL(rt2800_txdone_entry);
- void rt2800_txdone(struct rt2x00_dev *rt2x00dev)
- {
- struct data_queue *queue;
- struct queue_entry *entry;
- u32 reg;
- u8 qid;
-
- while (kfifo_get(&rt2x00dev->txstatus_fifo, ®)) {
-
- /* TX_STA_FIFO_PID_QUEUE is a 2-bit field, thus
- * qid is guaranteed to be one of the TX QIDs
- */
- qid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE);
- queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
- if (unlikely(!queue)) {
- WARNING(rt2x00dev, "Got TX status for an unavailable "
- "queue %u, dropping\n", qid);
- continue;
- }
-
- /*
- * Inside each queue, we process each entry in a chronological
- * order. We first check that the queue is not empty.
- */
- entry = NULL;
- while (!rt2x00queue_empty(queue)) {
- entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
- if (rt2800_txdone_entry_check(entry, reg))
- break;
- }
-
- if (!entry || rt2x00queue_empty(queue))
- break;
-
- rt2800_txdone_entry(entry, reg);
- }
- }
- EXPORT_SYMBOL_GPL(rt2800_txdone);
-
void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
gf20_rate = gf40_rate = 0x0003;
}
break;
- };
+ }
/* check for STAs not supporting greenfield mode */
if (any_sta_nongf)
}
EXPORT_SYMBOL_GPL(rt2800_config_erp);
+ static void rt2800_config_3572bt_ant(struct rt2x00_dev *rt2x00dev)
+ {
+ u32 reg;
+ u16 eeprom;
+ u8 led_ctrl, led_g_mode, led_r_mode;
+
+ rt2800_register_read(rt2x00dev, GPIO_SWITCH, ®);
+ if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
+ rt2x00_set_field32(®, GPIO_SWITCH_0, 1);
+ rt2x00_set_field32(®, GPIO_SWITCH_1, 1);
+ } else {
+ rt2x00_set_field32(®, GPIO_SWITCH_0, 0);
+ rt2x00_set_field32(®, GPIO_SWITCH_1, 0);
+ }
+ rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
+
+ rt2800_register_read(rt2x00dev, LED_CFG, ®);
+ led_g_mode = rt2x00_get_field32(reg, LED_CFG_LED_POLAR) ? 3 : 0;
+ led_r_mode = rt2x00_get_field32(reg, LED_CFG_LED_POLAR) ? 0 : 3;
+ if (led_g_mode != rt2x00_get_field32(reg, LED_CFG_G_LED_MODE) ||
+ led_r_mode != rt2x00_get_field32(reg, LED_CFG_R_LED_MODE)) {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
+ led_ctrl = rt2x00_get_field16(eeprom, EEPROM_FREQ_LED_MODE);
+ if (led_ctrl == 0 || led_ctrl > 0x40) {
+ rt2x00_set_field32(®, LED_CFG_G_LED_MODE, led_g_mode);
+ rt2x00_set_field32(®, LED_CFG_R_LED_MODE, led_r_mode);
+ rt2800_register_write(rt2x00dev, LED_CFG, reg);
+ } else {
+ rt2800_mcu_request(rt2x00dev, MCU_BAND_SELECT, 0xff,
+ (led_g_mode << 2) | led_r_mode, 1);
+ }
+ }
+ }
+
static void rt2800_set_ant_diversity(struct rt2x00_dev *rt2x00dev,
enum antenna ant)
{
rt2800_bbp_read(rt2x00dev, 1, &r1);
rt2800_bbp_read(rt2x00dev, 3, &r3);
+ if (rt2x00_rt(rt2x00dev, RT3572) &&
+ test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags))
+ rt2800_config_3572bt_ant(rt2x00dev);
+
/*
* Configure the TX antenna.
*/
rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
break;
case 2:
- rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
+ if (rt2x00_rt(rt2x00dev, RT3572) &&
+ test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags))
+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 1);
+ else
+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
break;
case 3:
rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
break;
case 2:
- rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
+ if (rt2x00_rt(rt2x00dev, RT3572) &&
+ test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
+ rt2x00_set_field8(&r3, BBP3_RX_ADC, 1);
+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA,
+ rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
+ rt2800_set_ant_diversity(rt2x00dev, ANTENNA_B);
+ } else {
+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
+ }
break;
case 3:
rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
}
+ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf,
+ struct rf_channel *rf,
+ struct channel_info *info)
+ {
+ u8 rfcsr;
+ u32 reg;
+
+ if (rf->channel <= 14) {
+ rt2800_bbp_write(rt2x00dev, 25, 0x15);
+ rt2800_bbp_write(rt2x00dev, 26, 0x85);
+ } else {
+ rt2800_bbp_write(rt2x00dev, 25, 0x09);
+ rt2800_bbp_write(rt2x00dev, 26, 0xff);
+ }
+
+ rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
+ rt2800_rfcsr_write(rt2x00dev, 3, rf->rf3);
+
+ rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2);
+ if (rf->channel <= 14)
+ rt2x00_set_field8(&rfcsr, RFCSR6_TXDIV, 2);
+ else
+ rt2x00_set_field8(&rfcsr, RFCSR6_TXDIV, 1);
+ rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 5, &rfcsr);
+ if (rf->channel <= 14)
+ rt2x00_set_field8(&rfcsr, RFCSR5_R1, 1);
+ else
+ rt2x00_set_field8(&rfcsr, RFCSR5_R1, 2);
+ rt2800_rfcsr_write(rt2x00dev, 5, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr);
+ if (rf->channel <= 14) {
+ rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 3);
+ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
+ (info->default_power1 & 0x3) |
+ ((info->default_power1 & 0xC) << 1));
+ } else {
+ rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 7);
+ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
+ (info->default_power1 & 0x3) |
+ ((info->default_power1 & 0xC) << 1));
+ }
+ rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr);
+ if (rf->channel <= 14) {
+ rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 3);
+ rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
+ (info->default_power2 & 0x3) |
+ ((info->default_power2 & 0xC) << 1));
+ } else {
+ rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 7);
+ rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
+ (info->default_power2 & 0x3) |
+ ((info->default_power2 & 0xC) << 1));
+ }
+ rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
+ if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
+ if (rf->channel <= 14) {
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
+ }
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
+ } else {
+ switch (rt2x00dev->default_ant.tx_chain_num) {
+ case 1:
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
+ case 2:
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
+ break;
+ }
+
+ switch (rt2x00dev->default_ant.rx_chain_num) {
+ case 1:
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
+ case 2:
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
+ break;
+ }
+ }
+ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
+ rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
+
+ rt2800_rfcsr_write(rt2x00dev, 24,
+ rt2x00dev->calibration[conf_is_ht40(conf)]);
+ rt2800_rfcsr_write(rt2x00dev, 31,
+ rt2x00dev->calibration[conf_is_ht40(conf)]);
+
+ if (rf->channel <= 14) {
+ rt2800_rfcsr_write(rt2x00dev, 7, 0xd8);
+ rt2800_rfcsr_write(rt2x00dev, 9, 0xc3);
+ rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
+ rt2800_rfcsr_write(rt2x00dev, 11, 0xb9);
+ rt2800_rfcsr_write(rt2x00dev, 15, 0x53);
+ rt2800_rfcsr_write(rt2x00dev, 16, 0x4c);
+ rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
+ rt2800_rfcsr_write(rt2x00dev, 19, 0x93);
+ rt2800_rfcsr_write(rt2x00dev, 20, 0xb3);
+ rt2800_rfcsr_write(rt2x00dev, 25, 0x15);
+ rt2800_rfcsr_write(rt2x00dev, 26, 0x85);
+ rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 29, 0x9b);
+ } else {
+ rt2800_rfcsr_write(rt2x00dev, 7, 0x14);
+ rt2800_rfcsr_write(rt2x00dev, 9, 0xc0);
+ rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
+ rt2800_rfcsr_write(rt2x00dev, 11, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 15, 0x43);
+ rt2800_rfcsr_write(rt2x00dev, 16, 0x7a);
+ rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
+ if (rf->channel <= 64) {
+ rt2800_rfcsr_write(rt2x00dev, 19, 0xb7);
+ rt2800_rfcsr_write(rt2x00dev, 20, 0xf6);
+ rt2800_rfcsr_write(rt2x00dev, 25, 0x3d);
+ } else if (rf->channel <= 128) {
+ rt2800_rfcsr_write(rt2x00dev, 19, 0x74);
+ rt2800_rfcsr_write(rt2x00dev, 20, 0xf4);
+ rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
+ } else {
+ rt2800_rfcsr_write(rt2x00dev, 19, 0x72);
+ rt2800_rfcsr_write(rt2x00dev, 20, 0xf3);
+ rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
+ }
+ rt2800_rfcsr_write(rt2x00dev, 26, 0x87);
+ rt2800_rfcsr_write(rt2x00dev, 27, 0x01);
+ rt2800_rfcsr_write(rt2x00dev, 29, 0x9f);
+ }
+
+ rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
+ rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT7, 0);
+ if (rf->channel <= 14)
+ rt2x00_set_field32(®, GPIO_CTRL_CFG_BIT7, 1);
+ else
+ rt2x00_set_field32(®, GPIO_CTRL_CFG_BIT7, 0);
+ rt2800_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+
+ rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
+ rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
+ }
#define RT5390_POWER_BOUND 0x27
#define RT5390_FREQ_OFFSET_BOUND 0x5f
rt2x00_rf(rt2x00dev, RF3020) ||
rt2x00_rf(rt2x00dev, RF3021) ||
rt2x00_rf(rt2x00dev, RF3022) ||
- rt2x00_rf(rt2x00dev, RF3052) ||
rt2x00_rf(rt2x00dev, RF3320))
rt2800_config_channel_rf3xxx(rt2x00dev, conf, rf, info);
+ else if (rt2x00_rf(rt2x00dev, RF3052))
+ rt2800_config_channel_rf3052(rt2x00dev, conf, rf, info);
else if (rt2x00_rf(rt2x00dev, RF5370) ||
rt2x00_rf(rt2x00dev, RF5390))
rt2800_config_channel_rf53xx(rt2x00dev, conf, rf, info);
}
}
} else {
- rt2800_bbp_write(rt2x00dev, 82, 0xf2);
+ if (rt2x00_rt(rt2x00dev, RT3572))
+ rt2800_bbp_write(rt2x00dev, 82, 0x94);
+ else
+ rt2800_bbp_write(rt2x00dev, 82, 0xf2);
if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags))
rt2800_bbp_write(rt2x00dev, 75, 0x46);
rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14);
rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg);
+ if (rt2x00_rt(rt2x00dev, RT3572))
+ rt2800_rfcsr_write(rt2x00dev, 8, 0);
+
tx_pin = 0;
/* Turn on unused PA or LNA when not using 1T or 1R */
if (rt2x00dev->default_ant.tx_chain_num == 2) {
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN,
+ rf->channel > 14);
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN,
+ rf->channel <= 14);
}
/* Turn on unused PA or LNA when not using 1T or 1R */
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
+ if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags))
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
+ else
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN,
+ rf->channel <= 14);
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
+ if (rt2x00_rt(rt2x00dev, RT3572))
+ rt2800_rfcsr_write(rt2x00dev, 8, 0x80);
+
rt2800_bbp_read(rt2x00dev, 4, &bbp);
rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
rt2800_bbp_write(rt2x00dev, 4, bbp);
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000030);
+ } else if (rt2x00_rt(rt2x00dev, RT3572)) {
+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
+ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
} else if (rt2x00_rt(rt2x00dev, RT5390)) {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
}
if (rt2800_is_305x_soc(rt2x00dev) ||
+ rt2x00_rt(rt2x00dev, RT3572) ||
rt2x00_rt(rt2x00dev, RT5390))
rt2800_bbp_write(rt2x00dev, 31, 0x08);
rt2x00_rt(rt2x00dev, RT3071) ||
rt2x00_rt(rt2x00dev, RT3090) ||
rt2x00_rt(rt2x00dev, RT3390) ||
+ rt2x00_rt(rt2x00dev, RT3572) ||
rt2x00_rt(rt2x00dev, RT5390)) {
rt2800_bbp_write(rt2x00dev, 79, 0x13);
rt2800_bbp_write(rt2x00dev, 80, 0x05);
rt2x00_rt_rev_gte(rt2x00dev, RT3071, REV_RT3071E) ||
rt2x00_rt_rev_gte(rt2x00dev, RT3090, REV_RT3090E) ||
rt2x00_rt_rev_gte(rt2x00dev, RT3390, REV_RT3390E) ||
+ rt2x00_rt(rt2x00dev, RT3572) ||
rt2x00_rt(rt2x00dev, RT5390) ||
rt2800_is_305x_soc(rt2x00dev))
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
if (rt2x00_rt(rt2x00dev, RT3071) ||
rt2x00_rt(rt2x00dev, RT3090) ||
rt2x00_rt(rt2x00dev, RT3390) ||
+ rt2x00_rt(rt2x00dev, RT3572) ||
rt2x00_rt(rt2x00dev, RT5390)) {
rt2800_bbp_read(rt2x00dev, 138, &value);
!rt2x00_rt(rt2x00dev, RT3071) &&
!rt2x00_rt(rt2x00dev, RT3090) &&
!rt2x00_rt(rt2x00dev, RT3390) &&
+ !rt2x00_rt(rt2x00dev, RT3572) &&
!rt2x00_rt(rt2x00dev, RT5390) &&
!rt2800_is_305x_soc(rt2x00dev))
return 0;
rt2800_rfcsr_write(rt2x00dev, 29, 0x8f);
rt2800_rfcsr_write(rt2x00dev, 30, 0x20);
rt2800_rfcsr_write(rt2x00dev, 31, 0x0f);
+ } else if (rt2x00_rt(rt2x00dev, RT3572)) {
+ rt2800_rfcsr_write(rt2x00dev, 0, 0x70);
+ rt2800_rfcsr_write(rt2x00dev, 1, 0x81);
+ rt2800_rfcsr_write(rt2x00dev, 2, 0xf1);
+ rt2800_rfcsr_write(rt2x00dev, 3, 0x02);
+ rt2800_rfcsr_write(rt2x00dev, 4, 0x4c);
+ rt2800_rfcsr_write(rt2x00dev, 5, 0x05);
+ rt2800_rfcsr_write(rt2x00dev, 6, 0x4a);
+ rt2800_rfcsr_write(rt2x00dev, 7, 0xd8);
+ rt2800_rfcsr_write(rt2x00dev, 9, 0xc3);
+ rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
+ rt2800_rfcsr_write(rt2x00dev, 11, 0xb9);
+ rt2800_rfcsr_write(rt2x00dev, 12, 0x70);
+ rt2800_rfcsr_write(rt2x00dev, 13, 0x65);
+ rt2800_rfcsr_write(rt2x00dev, 14, 0xa0);
+ rt2800_rfcsr_write(rt2x00dev, 15, 0x53);
+ rt2800_rfcsr_write(rt2x00dev, 16, 0x4c);
+ rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
+ rt2800_rfcsr_write(rt2x00dev, 18, 0xac);
+ rt2800_rfcsr_write(rt2x00dev, 19, 0x93);
+ rt2800_rfcsr_write(rt2x00dev, 20, 0xb3);
+ rt2800_rfcsr_write(rt2x00dev, 21, 0xd0);
+ rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 23, 0x3c);
+ rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
+ rt2800_rfcsr_write(rt2x00dev, 25, 0x15);
+ rt2800_rfcsr_write(rt2x00dev, 26, 0x85);
+ rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 29, 0x9b);
+ rt2800_rfcsr_write(rt2x00dev, 30, 0x09);
+ rt2800_rfcsr_write(rt2x00dev, 31, 0x10);
} else if (rt2800_is_305x_soc(rt2x00dev)) {
rt2800_rfcsr_write(rt2x00dev, 0, 0x50);
rt2800_rfcsr_write(rt2x00dev, 1, 0x01);
rt2800_register_read(rt2x00dev, GPIO_SWITCH, ®);
rt2x00_set_field32(®, GPIO_SWITCH_5, 0);
rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
+ } else if (rt2x00_rt(rt2x00dev, RT3572)) {
+ rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1);
+ rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
+
+ rt2800_register_read(rt2x00dev, LDO_CFG0, ®);
+ rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3);
+ rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1);
+ rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
+ msleep(1);
+ rt2800_register_read(rt2x00dev, LDO_CFG0, ®);
+ rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1);
+ rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
}
/*
rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
} else if (rt2x00_rt(rt2x00dev, RT3071) ||
rt2x00_rt(rt2x00dev, RT3090) ||
- rt2x00_rt(rt2x00dev, RT3390)) {
+ rt2x00_rt(rt2x00dev, RT3390) ||
+ rt2x00_rt(rt2x00dev, RT3572)) {
rt2x00dev->calibration[0] =
rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x13);
rt2x00dev->calibration[1] =
break;
default:
break;
- };
+ }
}
static void rt2800pci_kick_queue(struct data_queue *queue)
rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
- if (rt2x00_rt(rt2x00dev, RT5390)) {
+ if (rt2x00_is_pcie(rt2x00dev) &&
+ (rt2x00_rt(rt2x00dev, RT3572) ||
+ rt2x00_rt(rt2x00dev, RT5390))) {
rt2x00pci_register_read(rt2x00dev, AUX_CTRL, ®);
rt2x00_set_field32(®, AUX_CTRL_FORCE_PCIE_CLK, 1);
rt2x00_set_field32(®, AUX_CTRL_WAKE_PCIE_EN, 1);
config GENERIC_FIND_FIRST_BIT
bool
-config GENERIC_FIND_NEXT_BIT
- bool
-
-config GENERIC_FIND_BIT_LE
- bool
-
-config GENERIC_FIND_LAST_BIT
- bool
- default y
-
config CRC_CCITT
tristate "CRC-CCITT functions"
help
require M here. See Castagnoli93.
Module will be libcrc32c.
+ config CRC8
+ tristate "CRC8 function"
+ help
+ This option provides CRC8 function. Drivers may select this
+ when they need to do cyclic redundancy check according CRC8
+ algorithm. Module will be called crc8.
+
config AUDIT_GENERIC
bool
depends on AUDIT && !AUDIT_ARCH
If unsure, say N.
+ config CORDIC
+ tristate "Cordic function"
+ help
+ The option provides arithmetic function using cordic algorithm
+ so its calculations are in fixed point. Modules can select this
+ when they require this function. Module will be called cordic.
+
endmenu
idr.o int_sqrt.o extable.o prio_tree.o \
sha1.o irq_regs.o reciprocal_div.o argv_split.o \
proportions.o prio_heap.o ratelimit.o show_mem.o \
- is_single_threaded.o plist.o decompress.o
+ is_single_threaded.o plist.o decompress.o find_next_bit.o
lib-$(CONFIG_MMU) += ioremap.o
lib-$(CONFIG_SMP) += cpumask.o
obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \
string_helpers.o gcd.o lcm.o list_sort.o uuid.o flex_array.o \
- bsearch.o
+ bsearch.o find_last_bit.o
obj-y += kstrtox.o
obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o
obj-$(CONFIG_DEBUG_SPINLOCK) += spinlock_debug.o
lib-$(CONFIG_RWSEM_GENERIC_SPINLOCK) += rwsem-spinlock.o
lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
-lib-$(CONFIG_GENERIC_FIND_FIRST_BIT) += find_next_bit.o
-lib-$(CONFIG_GENERIC_FIND_NEXT_BIT) += find_next_bit.o
-lib-$(CONFIG_GENERIC_FIND_BIT_LE) += find_next_bit.o
-obj-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o
CFLAGS_hweight.o = $(subst $(quote),,$(CONFIG_ARCH_HWEIGHT_CFLAGS))
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
obj-$(CONFIG_CRC32) += crc32.o
obj-$(CONFIG_CRC7) += crc7.o
obj-$(CONFIG_LIBCRC32C) += libcrc32c.o
+ obj-$(CONFIG_CRC8) += crc8.o
obj-$(CONFIG_GENERIC_ALLOCATOR) += genalloc.o
obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate/
obj-$(CONFIG_CPU_RMAP) += cpu_rmap.o
+ obj-$(CONFIG_CORDIC) += cordic.o
+
hostprogs-y := gen_crc32table
clean-files := crc32table.h