[media] media: i2c: tvp7002: add OF support
authorLad, Prabhakar <prabhakar.csengg@gmail.com>
Sun, 11 Aug 2013 05:25:21 +0000 (02:25 -0300)
committerMauro Carvalho Chehab <m.chehab@samsung.com>
Sat, 24 Aug 2013 07:16:05 +0000 (04:16 -0300)
add OF support for the tvp7002 driver.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Documentation/devicetree/bindings/media/i2c/tvp7002.txt [new file with mode: 0644]
drivers/media/i2c/tvp7002.c

diff --git a/Documentation/devicetree/bindings/media/i2c/tvp7002.txt b/Documentation/devicetree/bindings/media/i2c/tvp7002.txt
new file mode 100644 (file)
index 0000000..5f28b5d
--- /dev/null
@@ -0,0 +1,53 @@
+* Texas Instruments TV7002 video decoder
+
+The TVP7002 device supports digitizing of video and graphics signal in RGB and
+YPbPr color space.
+
+Required Properties :
+- compatible : Must be "ti,tvp7002"
+
+Optional Properties:
+- hsync-active: HSYNC Polarity configuration for the bus. Default value when
+  this property is not specified is <0>.
+
+- vsync-active: VSYNC Polarity configuration for the bus. Default value when
+  this property is not specified is <0>.
+
+- pclk-sample: Clock polarity of the bus. Default value when this property is
+  not specified is <0>.
+
+- sync-on-green-active: Active state of Sync-on-green signal property of the
+  endpoint.
+  0 = Normal Operation (Active Low, Default)
+  1 = Inverted operation
+
+- field-even-active: Active-high Field ID output polarity control of the bus.
+  Under normal operation, the field ID output is set to logic 1 for an odd field
+  (field 1) and set to logic 0 for an even field (field 0).
+  0 = Normal Operation (Active Low, Default)
+  1 = FID output polarity inverted
+
+For further reading of port node refer Documentation/devicetree/bindings/media/
+video-interfaces.txt.
+
+Example:
+
+       i2c0@1c22000 {
+               ...
+               ...
+               tvp7002@5c {
+                       compatible = "ti,tvp7002";
+                       reg = <0x5c>;
+
+                       port {
+                               tvp7002_1: endpoint {
+                                       hsync-active = <1>;
+                                       vsync-active = <1>;
+                                       pclk-sample = <0>;
+                                       sync-on-green-active = <1>;
+                                       field-even-active = <0>;
+                               };
+                       };
+               };
+               ...
+       };
index f6b1f3fe2608a7f789444de2543c6c81ecf1b392..24a08fa7e32875fe223ed3c78aef8f9d5f984376 100644 (file)
@@ -35,6 +35,8 @@
 #include <media/v4l2-device.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ctrls.h>
+#include <media/v4l2-of.h>
+
 #include "tvp7002_reg.h"
 
 MODULE_DESCRIPTION("TI TVP7002 Video and Graphics Digitizer driver");
@@ -943,6 +945,48 @@ static const struct v4l2_subdev_ops tvp7002_ops = {
        .pad = &tvp7002_pad_ops,
 };
 
+static struct tvp7002_config *
+tvp7002_get_pdata(struct i2c_client *client)
+{
+       struct v4l2_of_endpoint bus_cfg;
+       struct tvp7002_config *pdata;
+       struct device_node *endpoint;
+       unsigned int flags;
+
+       if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
+               return client->dev.platform_data;
+
+       endpoint = v4l2_of_get_next_endpoint(client->dev.of_node, NULL);
+       if (!endpoint)
+               return NULL;
+
+       pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+       if (!pdata)
+               goto done;
+
+       v4l2_of_parse_endpoint(endpoint, &bus_cfg);
+       flags = bus_cfg.bus.parallel.flags;
+
+       if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
+               pdata->hs_polarity = 1;
+
+       if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
+               pdata->vs_polarity = 1;
+
+       if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
+               pdata->clk_polarity = 1;
+
+       if (flags & V4L2_MBUS_FIELD_EVEN_HIGH)
+               pdata->fid_polarity = 1;
+
+       if (flags & V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH)
+               pdata->sog_polarity = 1;
+
+done:
+       of_node_put(endpoint);
+       return pdata;
+}
+
 /*
  * tvp7002_probe - Probe a TVP7002 device
  * @c: ptr to i2c_client struct
@@ -954,32 +998,32 @@ static const struct v4l2_subdev_ops tvp7002_ops = {
  */
 static int tvp7002_probe(struct i2c_client *c, const struct i2c_device_id *id)
 {
+       struct tvp7002_config *pdata = tvp7002_get_pdata(c);
        struct v4l2_subdev *sd;
        struct tvp7002 *device;
        struct v4l2_dv_timings timings;
        int polarity_a;
        int polarity_b;
        u8 revision;
-
        int error;
 
+       if (pdata == NULL) {
+               dev_err(&c->dev, "No platform data\n");
+               return -EINVAL;
+       }
+
        /* Check if the adapter supports the needed features */
        if (!i2c_check_functionality(c->adapter,
                I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
                return -EIO;
 
-       if (!c->dev.platform_data) {
-               v4l_err(c, "No platform data!!\n");
-               return -ENODEV;
-       }
-
        device = devm_kzalloc(&c->dev, sizeof(struct tvp7002), GFP_KERNEL);
 
        if (!device)
                return -ENOMEM;
 
        sd = &device->sd;
-       device->pdata = c->dev.platform_data;
+       device->pdata = pdata;
        device->current_timings = tvp7002_timings;
 
        /* Tell v4l2 the device is ready */
@@ -1084,9 +1128,18 @@ static const struct i2c_device_id tvp7002_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, tvp7002_id);
 
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id tvp7002_of_match[] = {
+       { .compatible = "ti,tvp7002", },
+       { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, tvp7002_of_match);
+#endif
+
 /* I2C driver data */
 static struct i2c_driver tvp7002_driver = {
        .driver = {
+               .of_match_table = of_match_ptr(tvp7002_of_match),
                .owner = THIS_MODULE,
                .name = TVP7002_MODULE_NAME,
        },