powerpc: Add relocation on exception vector handlers
authorMichael Neuling <mikey@neuling.org>
Fri, 2 Nov 2012 06:21:43 +0000 (17:21 +1100)
committerBenjamin Herrenschmidt <benh@kernel.crashing.org>
Thu, 15 Nov 2012 04:08:05 +0000 (15:08 +1100)
POWER8/v2.07 allows exceptions to be taken with the MMU still on.

A new set of exception vectors is added at 0xc000_0000_0000_4xxx.  When the HW
takes us here, MSR IR/DR will be set already and we no longer need a costly
RFID to turn the MMU back on again.

The original 0x0 based exception vectors remain for when the HW can't leave the
MMU on.  Examples of this are when we can't trust the current MMU mappings,
like when we are changing from guest to hypervisor (HV 0 -> 1) or when the MMU
was off already.  In these cases the HW will take us to the original 0x0 based
exception vectors with the MMU off as before.

This uses the new macros added previously too implement these new execption
vectors at 0xc000_0000_0000_4xxx.  We exit these exception vectors using
mflr/blr (rather than mtspr SSR0/RFID), since we don't need the costly MMU
switch anymore.

This moves the __end_interrupts marker down past these new 0x4000 vectors since
they will need to be copied down to 0x0 when the kernel is not at 0x0.

Signed-off-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
arch/powerpc/include/asm/exception-64s.h
arch/powerpc/kernel/exceptions-64s.S
arch/powerpc/kernel/head_64.S

index 10787d3673ac8a963c337d1ba2c85807613b163b..ad708dda3ba371a5a63b9f5e970870dd0e9aaa71 100644 (file)
        mfspr   r10,SPRN_CFAR;                                          \
        std     r10,area+EX_CFAR(r13);                                  \
        END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66);         \
+       SAVE_LR(r10, area);                                             \
        mfcr    r9;                                                     \
        extra(vec);                                                     \
        std     r11,area+EX_R11(r13);                                   \
@@ -215,6 +216,7 @@ do_kvm_##n:                                                         \
        sth     r1,PACA_TRAP_SAVE(r13);                                    \
        std     r3,area+EX_R3(r13);                                        \
        addi    r3,r13,area;            /* r3 -> where regs are saved*/    \
+       RESTORE_LR(r1, area);                                              \
        b       bad_stack;                                                 \
 3:     std     r9,_CCR(r1);            /* save CR in stackframe        */ \
        std     r11,_NIP(r1);           /* save SRR0 in stackframe      */ \
@@ -240,8 +242,8 @@ do_kvm_##n:                                                         \
        ld      r10,area+EX_CFAR(r13);                                     \
        std     r10,ORIG_GPR3(r1);                                         \
        END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66);            \
+       GET_LR(r9,area);                /* Get LR, later save to stack  */ \
        ld      r2,PACATOC(r13);        /* get kernel TOC into r2       */ \
-       mflr    r9;                     /* save LR in stackframe        */ \
        std     r9,_LINK(r1);                                              \
        mfctr   r10;                    /* save CTR in stackframe       */ \
        std     r10,_CTR(r1);                                              \
index 4dc1a045052ac786c33d6151d40d3b53aa3a9d5f..4665e82fa37739a2ee9dec60880f033a68f060cf 100644 (file)
 /*
  * We layout physical memory as follows:
  * 0x0000 - 0x00ff : Secondary processor spin code
- * 0x0100 - 0x2fff : pSeries Interrupt prologs
- * 0x3000 - 0x5fff : interrupt support common interrupt prologs
- * 0x6000 - 0x6fff : Initial (CPU0) segment table
+ * 0x0100 - 0x17ff : pSeries Interrupt prologs
+ * 0x1800 - 0x4000 : interrupt support common interrupt prologs
+ * 0x4000 - 0x5fff : pSeries interrupts with IR=1,DR=1
+ * 0x6000 - 0x6fff : more interrupt support including for IR=1,DR=1
  * 0x7000 - 0x7fff : FWNMI data area
- * 0x8000 -        : Early init and support code
+ * 0x8000 - 0x8fff : Initial (CPU0) segment table
+ * 0x9000 -        : Early init and support code
  */
        /* Syscall routine is used twice, in reloc-off and reloc-on paths */
 #define SYSCALL_PSERIES_1                                      \
@@ -619,10 +621,6 @@ slb_miss_user_pseries:
        b       .                               /* prevent spec. execution */
 #endif /* __DISABLED__ */
 
-       .align  7
-       .globl  __end_interrupts
-__end_interrupts:
-
 /*
  * Code from here down to __end_handlers is invoked from the
  * exception prologs above.  Because the prologs assemble the
@@ -673,7 +671,158 @@ machine_check_common:
        STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
 #endif /* CONFIG_CBE_RAS */
 
+       /*
+        * Relocation-on interrupts: A subset of the interrupts can be delivered
+        * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering
+        * it.  Addresses are the same as the original interrupt addresses, but
+        * offset by 0xc000000000004000.
+        * It's impossible to receive interrupts below 0x300 via this mechanism.
+        * KVM: None of these traps are from the guest ; anything that escalated
+        * to HV=1 from HV=0 is delivered via real mode handlers.
+        */
+
+       /*
+        * This uses the standard macro, since the original 0x300 vector
+        * only has extra guff for STAB-based processors -- which never
+        * come here.
+        */
+       STD_RELON_EXCEPTION_PSERIES(0x4300, 0x300, data_access)
+       . = 0x4380
+       .globl data_access_slb_relon_pSeries
+data_access_slb_relon_pSeries:
+       HMT_MEDIUM
+       SET_SCRATCH0(r13)
+       EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x380)
+       std     r3,PACA_EXSLB+EX_R3(r13)
+       mfspr   r3,SPRN_DAR
+       mfspr   r12,SPRN_SRR1
+#ifndef CONFIG_RELOCATABLE
+       b       .slb_miss_realmode
+#else
+       /*
+        * We can't just use a direct branch to .slb_miss_realmode
+        * because the distance from here to there depends on where
+        * the kernel ends up being put.
+        */
+       mfctr   r11
+       ld      r10,PACAKBASE(r13)
+       LOAD_HANDLER(r10, .slb_miss_realmode)
+       mtctr   r10
+       bctr
+#endif
+
+       STD_RELON_EXCEPTION_PSERIES(0x4400, 0x400, instruction_access)
+       . = 0x4480
+       .globl instruction_access_slb_relon_pSeries
+instruction_access_slb_relon_pSeries:
+       HMT_MEDIUM
+       SET_SCRATCH0(r13)
+       EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x480)
+       std     r3,PACA_EXSLB+EX_R3(r13)
+       mfspr   r3,SPRN_SRR0            /* SRR0 is faulting address */
+       mfspr   r12,SPRN_SRR1
+#ifndef CONFIG_RELOCATABLE
+       b       .slb_miss_realmode
+#else
+       mfctr   r11
+       ld      r10,PACAKBASE(r13)
+       LOAD_HANDLER(r10, .slb_miss_realmode)
+       mtctr   r10
+       bctr
+#endif
+
+       . = 0x4500
+       .globl hardware_interrupt_relon_pSeries;
+       .globl hardware_interrupt_relon_hv;
+hardware_interrupt_relon_pSeries:
+hardware_interrupt_relon_hv:
+       BEGIN_FTR_SECTION
+               _MASKABLE_RELON_EXCEPTION_PSERIES(0x502, hardware_interrupt, EXC_HV, SOFTEN_TEST_HV)
+       FTR_SECTION_ELSE
+               _MASKABLE_RELON_EXCEPTION_PSERIES(0x500, hardware_interrupt, EXC_STD, SOFTEN_TEST_PR)
+       ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_206)
+       STD_RELON_EXCEPTION_PSERIES(0x4600, 0x600, alignment)
+       STD_RELON_EXCEPTION_PSERIES(0x4700, 0x700, program_check)
+       STD_RELON_EXCEPTION_PSERIES(0x4800, 0x800, fp_unavailable)
+       MASKABLE_RELON_EXCEPTION_PSERIES(0x4900, 0x900, decrementer)
+       STD_RELON_EXCEPTION_HV(0x4980, 0x982, hdecrementer)
+       STD_RELON_EXCEPTION_PSERIES(0x4b00, 0xb00, trap_0b)
+
+       . = 0x4c00
+       .globl system_call_relon_pSeries
+system_call_relon_pSeries:
+       HMT_MEDIUM
+       SYSCALL_PSERIES_1
+       SYSCALL_PSERIES_2_DIRECT
+       SYSCALL_PSERIES_3
+
+       STD_RELON_EXCEPTION_PSERIES(0x4d00, 0xd00, single_step)
+
+       . = 0x4e00
+       b       h_data_storage_relon_hv
+
+       . = 0x4e20
+       b       h_instr_storage_relon_hv
+
+       . = 0x4e40
+       b       emulation_assist_relon_hv
+
+       . = 0x4e50
+       b       hmi_exception_relon_hv
+
+       . = 0x4e60
+       b       hmi_exception_relon_hv
+
+       /* For when we support the doorbell interrupt:
+       STD_RELON_EXCEPTION_HYPERVISOR(0x4e80, 0xe80, doorbell_hyper)
+       */
+
+performance_monitor_relon_pSeries_1:
+       . = 0x4f00
+       b       performance_monitor_relon_pSeries
+
+altivec_unavailable_relon_pSeries_1:
+       . = 0x4f20
+       b       altivec_unavailable_relon_pSeries
+
+vsx_unavailable_relon_pSeries_1:
+       . = 0x4f40
+       b       vsx_unavailable_relon_pSeries
+
+#ifdef CONFIG_CBE_RAS
+       STD_RELON_EXCEPTION_HV(0x5200, 0x1202, cbe_system_error)
+#endif /* CONFIG_CBE_RAS */
+       STD_RELON_EXCEPTION_PSERIES(0x5300, 0x1300, instruction_breakpoint)
+#ifdef CONFIG_PPC_DENORMALISATION
+       . = 0x5500
+       b       denorm_exception_hv
+#endif
+#ifdef CONFIG_CBE_RAS
+       STD_RELON_EXCEPTION_HV(0x5600, 0x1602, cbe_maintenance)
+#else
+#ifdef CONFIG_HVC_SCOM
+       STD_RELON_EXCEPTION_HV(0x5600, 0x1600, maintence_interrupt)
+       KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1600)
+#endif /* CONFIG_HVC_SCOM */
+#endif /* CONFIG_CBE_RAS */
+       STD_RELON_EXCEPTION_PSERIES(0x5700, 0x1700, altivec_assist)
+#ifdef CONFIG_CBE_RAS
+       STD_RELON_EXCEPTION_HV(0x5800, 0x1802, cbe_thermal)
+#endif /* CONFIG_CBE_RAS */
+
+       /* Other future vectors */
+       .align  7
+       .globl  __end_interrupts
+__end_interrupts:
+
        .align  7
+system_call_entry_direct:
+#if defined(CONFIG_RELOCATABLE)
+       /* The first level prologue may have used LR to get here, saving
+        * orig in r10.  To save hacking/ifdeffing common code, restore here.
+        */
+       mtlr    r10
+#endif
 system_call_entry:
        b       system_call_common
 
@@ -1196,6 +1345,21 @@ _GLOBAL(do_stab_bolted)
        rfid
        b       .       /* prevent speculative execution */
 
+
+       /* Equivalents to the above handlers for relocation-on interrupt vectors */
+       STD_RELON_EXCEPTION_HV(., 0xe00, h_data_storage)
+       KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe00)
+       STD_RELON_EXCEPTION_HV(., 0xe20, h_instr_storage)
+       KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe20)
+       STD_RELON_EXCEPTION_HV(., 0xe40, emulation_assist)
+       KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe40)
+       STD_RELON_EXCEPTION_HV(., 0xe60, hmi_exception)
+       KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe60)
+
+       STD_RELON_EXCEPTION_PSERIES(., 0xf00, performance_monitor)
+       STD_RELON_EXCEPTION_PSERIES(., 0xf20, altivec_unavailable)
+       STD_RELON_EXCEPTION_PSERIES(., 0xf40, vsx_unavailable)
+
 #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
 /*
  * Data area reserved for FWNMI option.
index 11a4df9dd58089a896325a19baf214a06301dedc..116f0868695bc65a689d0759f9391247dc14eed3 100644 (file)
@@ -432,7 +432,8 @@ _STATIC(__after_prom_start)
        cmplwi  cr0,r7,1
        bne     3f
 
-       li      r5,__end_interrupts - _stext    /* just copy interrupts */
+       /* just copy interrupts */
+       LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext)
        b       5f
 3:
 #endif