i2c: nomadik: factor platform data into state container
authorLinus Walleij <linus.walleij@linaro.org>
Mon, 3 Feb 2014 10:27:26 +0000 (11:27 +0100)
committerWolfram Sang <wsa@the-dreams.de>
Wed, 5 Mar 2014 16:10:26 +0000 (17:10 +0100)
Move the former platform data struct nmk_i2c_controller into the
per-device state container struct i2c_nmk_client, and remove all
the platform data probe path hacks.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[wsa: use 100kHz as default]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
drivers/i2c/busses/i2c-nomadik.c

index 4443613514ee6e8c34166dcd1cc2e84ed833eaa2..e2a890d84fb7a24fb0468771b744f2dccb43cbe9 100644 (file)
@@ -110,22 +110,6 @@ enum i2c_freq_mode {
        I2C_FREQ_MODE_FAST_PLUS,        /* up to 1 Mb/s */
 };
 
-/**
- * struct nmk_i2c_controller - client specific controller configuration
- * @clk_freq:  clock frequency for the operation mode
- * @tft:       Tx FIFO Threshold in bytes
- * @rft:       Rx FIFO Threshold in bytes
- * @timeout    Slave response timeout(ms)
- * @sm:                speed mode
- */
-struct nmk_i2c_controller {
-       u32             clk_freq;
-       unsigned char   tft;
-       unsigned char   rft;
-       int timeout;
-       enum i2c_freq_mode      sm;
-};
-
 /**
  * struct i2c_vendor_data - per-vendor variations
  * @has_mtdws: variant has the MTDWS bit
@@ -174,8 +158,12 @@ struct i2c_nmk_client {
  * @irq: interrupt line for the controller.
  * @virtbase: virtual io memory area.
  * @clk: hardware i2c block clock.
- * @cfg: machine provided controller configuration.
  * @cli: holder of client specific data.
+ * @clk_freq: clock frequency for the operation mode
+ * @tft: Tx FIFO Threshold in bytes
+ * @rft: Rx FIFO Threshold in bytes
+ * @timeout Slave response timeout (ms)
+ * @sm: speed mode
  * @stop: stop condition.
  * @xfer_complete: acknowledge completion for a I2C message.
  * @result: controller propogated result.
@@ -188,8 +176,12 @@ struct nmk_i2c_dev {
        int                             irq;
        void __iomem                    *virtbase;
        struct clk                      *clk;
-       struct nmk_i2c_controller       cfg;
        struct i2c_nmk_client           cli;
+       u32                             clk_freq;
+       unsigned char                   tft;
+       unsigned char                   rft;
+       int                             timeout;
+       enum i2c_freq_mode              sm;
        int                             stop;
        struct completion               xfer_complete;
        int                             result;
@@ -386,7 +378,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
         * slsu = cycles / (1000000000 / f) + 1
         */
        ns = DIV_ROUND_UP_ULL(1000000000ULL, i2c_clk);
-       switch (dev->cfg.sm) {
+       switch (dev->sm) {
        case I2C_FREQ_MODE_FAST:
        case I2C_FREQ_MODE_FAST_PLUS:
                slsu = DIV_ROUND_UP(100, ns); /* Fast */
@@ -409,7 +401,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
         * 2 whereas it is 3 for fast and fastplus mode of
         * operation. TODO - high speed support.
         */
-       div = (dev->cfg.clk_freq > 100000) ? 3 : 2;
+       div = (dev->clk_freq > 100000) ? 3 : 2;
 
        /*
         * generate the mask for baud rate counters. The controller
@@ -419,7 +411,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
         * so set brcr1 to 0.
         */
        brcr1 = 0 << 16;
-       brcr2 = (i2c_clk/(dev->cfg.clk_freq * div)) & 0xffff;
+       brcr2 = (i2c_clk/(dev->clk_freq * div)) & 0xffff;
 
        /* set the baud rate counter register */
        writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
@@ -430,7 +422,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
         * TODO - support for fast mode plus (up to 1Mb/s)
         * and high speed (up to 3.4 Mb/s)
         */
-       if (dev->cfg.sm > I2C_FREQ_MODE_FAST) {
+       if (dev->sm > I2C_FREQ_MODE_FAST) {
                dev_err(&dev->adev->dev,
                        "do not support this mode defaulting to std. mode\n");
                brcr2 = i2c_clk/(100000 * 2) & 0xffff;
@@ -438,11 +430,11 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
                writel(I2C_FREQ_MODE_STANDARD << 4,
                                dev->virtbase + I2C_CR);
        }
-       writel(dev->cfg.sm << 4, dev->virtbase + I2C_CR);
+       writel(dev->sm << 4, dev->virtbase + I2C_CR);
 
        /* set the Tx and Rx FIFO threshold */
-       writel(dev->cfg.tft, dev->virtbase + I2C_TFTR);
-       writel(dev->cfg.rft, dev->virtbase + I2C_RFTR);
+       writel(dev->tft, dev->virtbase + I2C_TFTR);
+       writel(dev->rft, dev->virtbase + I2C_RFTR);
 }
 
 /**
@@ -958,63 +950,32 @@ static const struct i2c_algorithm nmk_i2c_algo = {
        .functionality  = nmk_i2c_functionality
 };
 
-static struct nmk_i2c_controller u8500_i2c = {
-       .tft            = 1,      /* Tx FIFO threshold */
-       .rft            = 8,      /* Rx FIFO threshold */
-       .clk_freq       = 400000, /* fast mode operation */
-       .timeout        = 200,    /* Slave response timeout(ms) */
-       .sm             = I2C_FREQ_MODE_FAST,
-};
-
 static void nmk_i2c_of_probe(struct device_node *np,
-                       struct nmk_i2c_controller *pdata)
+                            struct nmk_i2c_dev *nmk)
 {
-       of_property_read_u32(np, "clock-frequency", &pdata->clk_freq);
+       /* Default to 100 kHz if no frequency is given in the node */
+       if (of_property_read_u32(np, "clock-frequency", &nmk->clk_freq))
+               nmk->clk_freq = 100000;
 
        /* This driver only supports 'standard' and 'fast' modes of operation. */
-       if (pdata->clk_freq <= 100000)
-               pdata->sm = I2C_FREQ_MODE_STANDARD;
+       if (nmk->clk_freq <= 100000)
+               nmk->sm = I2C_FREQ_MODE_STANDARD;
        else
-               pdata->sm = I2C_FREQ_MODE_FAST;
+               nmk->sm = I2C_FREQ_MODE_FAST;
+       nmk->tft = 1; /* Tx FIFO threshold */
+       nmk->rft = 8; /* Rx FIFO threshold */
+       nmk->timeout = 200; /* Slave response timeout(ms) */
 }
 
 static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 {
        int ret = 0;
-       struct nmk_i2c_controller *pdata = dev_get_platdata(&adev->dev);
        struct device_node *np = adev->dev.of_node;
        struct nmk_i2c_dev      *dev;
        struct i2c_adapter *adap;
        struct i2c_vendor_data *vendor = id->data;
        u32 max_fifo_threshold = (vendor->fifodepth / 2) - 1;
 
-       if (!pdata) {
-               if (np) {
-                       pdata = devm_kzalloc(&adev->dev, sizeof(*pdata), GFP_KERNEL);
-                       if (!pdata) {
-                               ret = -ENOMEM;
-                               goto err_no_mem;
-                       }
-                       /* Provide the default configuration as a base. */
-                       memcpy(pdata, &u8500_i2c, sizeof(struct nmk_i2c_controller));
-                       nmk_i2c_of_probe(np, pdata);
-               } else
-                       /* No i2c configuration found, using the default. */
-                       pdata = &u8500_i2c;
-       }
-
-       if (pdata->tft > max_fifo_threshold) {
-               dev_warn(&adev->dev, "requested TX FIFO threshold %u, adjusted down to %u\n",
-                       pdata->tft, max_fifo_threshold);
-               pdata->tft = max_fifo_threshold;
-       }
-
-       if (pdata->rft > max_fifo_threshold) {
-               dev_warn(&adev->dev, "requested RX FIFO threshold %u, adjusted down to %u\n",
-                       pdata->rft, max_fifo_threshold);
-               pdata->rft = max_fifo_threshold;
-       }
-
        dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL);
        if (!dev) {
                dev_err(&adev->dev, "cannot allocate memory\n");
@@ -1024,6 +985,20 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
        dev->vendor = vendor;
        dev->busy = false;
        dev->adev = adev;
+       nmk_i2c_of_probe(np, dev);
+
+       if (dev->tft > max_fifo_threshold) {
+               dev_warn(&adev->dev, "requested TX FIFO threshold %u, adjusted down to %u\n",
+                        dev->tft, max_fifo_threshold);
+               dev->tft = max_fifo_threshold;
+       }
+
+       if (dev->rft > max_fifo_threshold) {
+               dev_warn(&adev->dev, "requested RX FIFO threshold %u, adjusted down to %u\n",
+                       dev->rft, max_fifo_threshold);
+               dev->rft = max_fifo_threshold;
+       }
+
        amba_set_drvdata(adev, dev);
 
        /* Select default pin state */
@@ -1060,16 +1035,10 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
        adap->owner     = THIS_MODULE;
        adap->class     = I2C_CLASS_HWMON | I2C_CLASS_SPD;
        adap->algo      = &nmk_i2c_algo;
-       adap->timeout   = msecs_to_jiffies(pdata->timeout);
+       adap->timeout   = msecs_to_jiffies(dev->timeout);
        snprintf(adap->name, sizeof(adap->name),
                 "Nomadik I2C at %pR", &adev->res);
 
-       /* fetch the controller configuration from machine */
-       dev->cfg.clk_freq = pdata->clk_freq;
-       dev->cfg.tft    = pdata->tft;
-       dev->cfg.rft    = pdata->rft;
-       dev->cfg.sm     = pdata->sm;
-
        i2c_set_adapdata(adap, dev);
 
        dev_info(&adev->dev,