mmc: sdhci: add support for programmable clock mode

Host Controller v3.00 supports programmable clock mode as an optional
feature. The support for this mode is indicated by non-zero value in
bits 48-55 of the Capabilities register. If supported, the actual
value of Clock Multiplier is one more than the value provided in the
bit fields. We only set Clock Generator Select (bit 5) and SDCLK
Frequency Select (bits 8-15) of the Clock Control register in case
Preset Value Enable is not set, otherwise these fields are automatically
set by the Host Controller based on the UHS mode selected. Also, since
the maximum and minimum clock frequency in this mode can be
(Base Clock * Clock Mul) and (Base Clock * Clock Mul)/1024 respectively,
f_max and f_min have been recalculated to reflect this change.

Tested by Zhangfei Gao with a Toshiba uhs card and general hs card,
on mmp2 in SDMA mode.

Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Reviewed-by: Philip Rakity <prakity@marvell.com>
Tested-by: Philip Rakity <prakity@marvell.com>
Acked-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a1ab22415883445d6f3ad6371dfe01470253f941..07cca557c4b5346690d7f3d6294f7fd995d5fe86 100644 (file)
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1013,8 +1013,8 @@ static void sdhci_finish_command(struct sdhci_host *host)
 
 static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 {
-       int div;
-       u16 clk;
+       int div = 0; /* Initialized for compiler warning */
+       u16 clk = 0;
        unsigned long timeout;
 
        if (clock == host->clock)
@@ -1032,14 +1032,45 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
                goto out;
 
        if (host->version >= SDHCI_SPEC_300) {
-               /* Version 3.00 divisors must be a multiple of 2. */
-               if (host->max_clk <= clock)
-                       div = 1;
-               else {
-                       for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; div += 2) {
-                               if ((host->max_clk / div) <= clock)
-                                       break;
+               /*
+                * Check if the Host Controller supports Programmable Clock
+                * Mode.
+                */
+               if (host->clk_mul) {
+                       u16 ctrl;
+
+                       /*
+                        * We need to figure out whether the Host Driver needs
+                        * to select Programmable Clock Mode, or the value can
+                        * be set automatically by the Host Controller based on
+                        * the Preset Value registers.
+                        */
+                       ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+                       if (!(ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
+                               for (div = 1; div <= 1024; div++) {
+                                       if (((host->max_clk * host->clk_mul) /
+                                             div) <= clock)
+                                               break;
+                               }
+                               /*
+                                * Set Programmable Clock Mode in the Clock
+                                * Control register.
+                                */
+                               clk = SDHCI_PROG_CLOCK_MODE;
+                               div--;
+                       }
+               } else {
+                       /* Version 3.00 divisors must be a multiple of 2. */
+                       if (host->max_clk <= clock)
+                               div = 1;
+                       else {
+                               for (div = 2; div < SDHCI_MAX_DIV_SPEC_300;
+                                    div += 2) {
+                                       if ((host->max_clk / div) <= clock)
+                                               break;
+                               }
                        }
+                       div >>= 1;
                }
        } else {
                /* Version 2.00 divisors must be a power of 2. */
@@ -1047,10 +1078,10 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
                        if ((host->max_clk / div) <= clock)
                                break;
                }
+               div >>= 1;
        }
-       div >>= 1;
 
-       clk = (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
+       clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
        clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
                << SDHCI_DIVIDER_HI_SHIFT;
        clk |= SDHCI_CLOCK_INT_EN;
@@ -2307,18 +2338,38 @@ int sdhci_add_host(struct sdhci_host *host)
        if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
                host->timeout_clk *= 1000;
 
+       /*
+        * In case of Host Controller v3.00, find out whether clock
+        * multiplier is supported.
+        */
+       host->clk_mul = (caps[1] & SDHCI_CLOCK_MUL_MASK) >>
+                       SDHCI_CLOCK_MUL_SHIFT;
+
+       /*
+        * In case the value in Clock Multiplier is 0, then programmable
+        * clock mode is not supported, otherwise the actual clock
+        * multiplier is one more than the value of Clock Multiplier
+        * in the Capabilities Register.
+        */
+       if (host->clk_mul)
+               host->clk_mul += 1;
+
        /*
         * Set host parameters.
         */
        mmc->ops = &sdhci_ops;
+       mmc->f_max = host->max_clk;
        if (host->ops->get_min_clock)
                mmc->f_min = host->ops->get_min_clock(host);
-       else if (host->version >= SDHCI_SPEC_300)
-               mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
-       else
+       else if (host->version >= SDHCI_SPEC_300) {
+               if (host->clk_mul) {
+                       mmc->f_min = (host->max_clk * host->clk_mul) / 1024;
+                       mmc->f_max = host->max_clk * host->clk_mul;
+               } else
+                       mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
+       } else
                mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
 
-       mmc->f_max = host->max_clk;
        mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE;
 
        /*

diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index e62367491eeec286a095126ec0f72710d45c48e6..6b0a0ee9ac6eb87afecb66a656cd99849a01e1b3 100644 (file)
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -101,6 +101,7 @@
 #define  SDHCI_DIV_MASK        0xFF
 #define  SDHCI_DIV_MASK_LEN    8
 #define  SDHCI_DIV_HI_MASK     0x300
+#define  SDHCI_PROG_CLOCK_MODE 0x0020
 #define  SDHCI_CLOCK_CARD_EN   0x0004
 #define  SDHCI_CLOCK_INT_STABLE        0x0002
 #define  SDHCI_CLOCK_INT_EN    0x0001
@@ -191,6 +192,8 @@
 #define  SDHCI_DRIVER_TYPE_C   0x00000020
 #define  SDHCI_DRIVER_TYPE_D   0x00000040
 #define  SDHCI_USE_SDR50_TUNING        0x00002000
+#define  SDHCI_CLOCK_MUL_MASK  0x00FF0000
+#define  SDHCI_CLOCK_MUL_SHIFT 16
 
 #define SDHCI_CAPABILITIES_1   0x44
 

diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index b74c8530e95921c1cc56997efcf3721356c2264b..a88a799ed7c3529879547085943af7590b6507df 100644 (file)
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -117,6 +117,7 @@ struct sdhci_host {
 
        unsigned int max_clk;   /* Max possible freq (MHz) */
        unsigned int timeout_clk;       /* Timeout freq (KHz) */
+       unsigned int clk_mul;   /* Clock Muliplier value */
 
        unsigned int clock;     /* Current clock (MHz) */
        u8 pwr;                 /* Current voltage */