--- /dev/null
+Christoph Hellwig <hch@lst.de>
"qcom,kpss-acc-v1"
"qcom,kpss-acc-v2"
"rockchip,rk3066-smp"
+ "ste,dbx500-smp"
- cpu-release-addr
Usage: required for systems that have an "enable-method"
VERSION = 4
PATCHLEVEL = 2
SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*
PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS)
+bootpImage uImage: zImage
+zImage: Image
+
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
ranges = <0 0x2000 0x2000>;
scm_conf: scm_conf@0 {
- compatible = "syscon";
+ compatible = "syscon", "simple-bus";
reg = <0x0 0x1400>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
<&clks IMX6QDL_CLK_LVDS1_GATE>,
<&clks IMX6QDL_CLK_PCIE_REF_125M>;
<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
};
};
+
+ mdio: mdio@24200f00 {
+ compatible = "ti,keystone_mdio", "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x24200f00 0x100>;
+ status = "disabled";
+ clocks = <&clkcpgmac>;
+ clock-names = "fck";
+ bus_freq = <2500000>;
+ };
/include/ "k2e-netcp.dtsi"
};
};
-
-&mdio {
- reg = <0x24200f00 0x100>;
-};
#gpio-cells = <2>;
gpio,syscon-dev = <&devctrl 0x25c>;
};
+
+ mdio: mdio@02090300 {
+ compatible = "ti,keystone_mdio", "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x02090300 0x100>;
+ status = "disabled";
+ clocks = <&clkcpgmac>;
+ clock-names = "fck";
+ bus_freq = <2500000>;
+ };
/include/ "k2hk-netcp.dtsi"
};
};
};
soc {
-
/include/ "k2l-clocks.dtsi"
uart2: serial@02348400 {
#gpio-cells = <2>;
gpio,syscon-dev = <&devctrl 0x24c>;
};
+
+ mdio: mdio@26200f00 {
+ compatible = "ti,keystone_mdio", "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x26200f00 0x100>;
+ status = "disabled";
+ clocks = <&clkcpgmac>;
+ clock-names = "fck";
+ bus_freq = <2500000>;
+ };
/include/ "k2l-netcp.dtsi"
};
};
/* Pin muxed. Enabled and configured by Bootloader */
status = "disabled";
};
-
-&mdio {
- reg = <0x26200f00 0x100>;
-};
1 0 0x21000A00 0x00000100>;
};
- mdio: mdio@02090300 {
- compatible = "ti,keystone_mdio", "ti,davinci_mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x02090300 0x100>;
- status = "disabled";
- clocks = <&clkpa>;
- clock-names = "fck";
- bus_freq = <2500000>;
- };
-
kirq0: keystone_irq@26202a0 {
compatible = "ti,keystone-irq";
interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
};
scm_conf: scm_conf@270 {
- compatible = "syscon";
+ compatible = "syscon",
+ "simple-bus";
reg = <0x270 0x240>;
#address-cells = <1>;
#size-cells = <1>;
};
omap4_padconf_global: omap4_padconf_global@5a0 {
- compatible = "syscon";
+ compatible = "syscon",
+ "simple-bus";
reg = <0x5a0 0x170>;
#address-cells = <1>;
#size-cells = <1>;
};
omap5_padconf_global: omap5_padconf_global@5a0 {
- compatible = "syscon";
+ compatible = "syscon",
+ "simple-bus";
reg = <0x5a0 0xec>;
#address-cells = <1>;
#size-cells = <1>;
#include "skeleton.dtsi"
/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "ste,dbx500-smp";
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ };
+ };
+ CPU0: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x300>;
+ };
+ CPU1: cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x301>;
+ };
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
ranges;
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&CPU0>;
- };
- core1 {
- cpu = <&CPU1>;
- };
- };
- };
- CPU0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <0>;
- };
- CPU1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <1>;
- };
- };
-
ptm@801ae000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0x801ae000 0x1000>;
}
/* the mmap semaphore is taken only if not in an atomic context */
- atomic = in_atomic();
+ atomic = faulthandler_disabled();
if (!atomic)
down_read(¤t->mm->mmap_sem);
pd->base = of_iomap(np, 0);
if (!pd->base) {
pr_warn("%s: failed to map memory\n", __func__);
- kfree(pd->pd.name);
+ kfree_const(pd->pd.name);
kfree(pd);
- of_node_put(np);
continue;
}
.irq_mask = wakeupgen_mask,
.irq_unmask = wakeupgen_unmask,
.irq_retrigger = irq_chip_retrigger_hierarchy,
+ .irq_set_type = irq_chip_set_type_parent,
.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND,
#ifdef CONFIG_SMP
.irq_set_affinity = irq_chip_set_affinity_parent,
SAVE_STATIC
move s0, t2
move a0, sp
- daddiu a1, v0, __NR_64_Linux
+ move a1, v0
jal syscall_trace_enter
bltz v0, 2f # seccomp failed? Skip syscall
SAVE_STATIC
move s0, t2
move a0, sp
- daddiu a1, v0, __NR_N32_Linux
+ move a1, v0
jal syscall_trace_enter
bltz v0, 2f # seccomp failed? Skip syscall
#else /* CONFIG_X86_32 */
/* frame pointer must be last for get_wchan */
-#define SAVE_CONTEXT "pushq %%rbp ; movq %%rsi,%%rbp\n\t"
-#define RESTORE_CONTEXT "movq %%rbp,%%rsi ; popq %%rbp\t"
+#define SAVE_CONTEXT "pushf ; pushq %%rbp ; movq %%rsi,%%rbp\n\t"
+#define RESTORE_CONTEXT "movq %%rbp,%%rsi ; popq %%rbp ; popf\t"
#define __EXTRA_CLOBBER \
, "rcx", "rbx", "rdx", "r8", "r9", "r10", "r11", \
- "r12", "r13", "r14", "r15", "flags"
+ "r12", "r13", "r14", "r15"
#ifdef CONFIG_CC_STACKPROTECTOR
#define __switch_canary \
#define __switch_canary_iparam
#endif /* CC_STACKPROTECTOR */
-/*
- * There is no need to save or restore flags, because flags are always
- * clean in kernel mode, with the possible exception of IOPL. Kernel IOPL
- * has no effect.
- */
+/* Save restore flags to clear handle leaking NT */
#define switch_to(prev, next, last) \
asm volatile(SAVE_CONTEXT \
"movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */ \
irq_data->chip = &lapic_controller;
irq_data->chip_data = data;
irq_data->hwirq = virq + i;
- err = assign_irq_vector_policy(virq, irq_data->node, data,
+ err = assign_irq_vector_policy(virq + i, irq_data->node, data,
info);
if (err)
goto error;
dst_fpu->fpregs_active = 0;
dst_fpu->last_cpu = -1;
- if (src_fpu->fpstate_active)
+ if (src_fpu->fpstate_active && cpu_has_fpu)
fpu_copy(dst_fpu, src_fpu);
return 0;
write_cr0(cr0);
/* Flush out any pending x87 state: */
- asm volatile ("fninit");
+#ifdef CONFIG_MATH_EMULATION
+ if (!cpu_has_fpu)
+ fpstate_init_soft(¤t->thread.fpu.state.soft);
+ else
+#endif
+ asm volatile ("fninit");
}
/*
static void mwait_idle(void)
{
if (!current_set_polling_and_test()) {
+ trace_cpu_idle_rcuidle(1, smp_processor_id());
if (this_cpu_has(X86_BUG_CLFLUSH_MONITOR)) {
smp_mb(); /* quirk */
clflush((void *)¤t_thread_info()->flags);
__sti_mwait(0, 0);
else
local_irq_enable();
+ trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
} else {
local_irq_enable();
}
struct desc_struct *desc;
unsigned long base;
- seg &= ~7UL;
+ seg >>= 3;
mutex_lock(&child->mm->context.lock);
if (unlikely(!child->mm->context.ldt ||
- (seg >> 3) >= child->mm->context.ldt->size))
+ seg >= child->mm->context.ldt->size))
addr = -1L; /* bogus selector, access would fault */
else {
desc = &child->mm->context.ldt->entries[seg];
#include <asm/uaccess.h>
#include <asm/traps.h>
-#include <asm/desc.h>
#include <asm/user.h>
#include <asm/fpu/internal.h>
math_abort(FPU_info, SIGILL);
}
- code_descriptor = LDT_DESCRIPTOR(FPU_CS);
+ code_descriptor = FPU_get_ldt_descriptor(FPU_CS);
if (SEG_D_SIZE(code_descriptor)) {
/* The above test may be wrong, the book is not clear */
/* Segmented 32 bit protected mode */
#include <linux/kernel.h>
#include <linux/mm.h>
-/* s is always from a cpu register, and the cpu does bounds checking
- * during register load --> no further bounds checks needed */
-#define LDT_DESCRIPTOR(s) (((struct desc_struct *)current->mm->context.ldt)[(s) >> 3])
+#include <asm/desc.h>
+#include <asm/mmu_context.h>
+
+static inline struct desc_struct FPU_get_ldt_descriptor(unsigned seg)
+{
+ static struct desc_struct zero_desc;
+ struct desc_struct ret = zero_desc;
+
+#ifdef CONFIG_MODIFY_LDT_SYSCALL
+ seg >>= 3;
+ mutex_lock(¤t->mm->context.lock);
+ if (current->mm->context.ldt && seg < current->mm->context.ldt->size)
+ ret = current->mm->context.ldt->entries[seg];
+ mutex_unlock(¤t->mm->context.lock);
+#endif
+ return ret;
+}
+
#define SEG_D_SIZE(x) ((x).b & (3 << 21))
#define SEG_G_BIT(x) ((x).b & (1 << 23))
#define SEG_GRANULARITY(x) (((x).b & (1 << 23)) ? 4096 : 1)
#include <linux/stddef.h>
#include <asm/uaccess.h>
-#include <asm/desc.h>
#include "fpu_system.h"
#include "exception.h"
addr->selector = PM_REG_(segment);
}
- descriptor = LDT_DESCRIPTOR(PM_REG_(segment));
+ descriptor = FPU_get_ldt_descriptor(addr->selector);
base_address = SEG_BASE_ADDR(descriptor);
address = base_address + offset;
limit = base_address
select PARAVIRT_CLOCK
select XEN_HAVE_PVMMU
depends on X86_64 || (X86_32 && X86_PAE)
- depends on X86_TSC
+ depends on X86_LOCAL_APIC && X86_TSC
help
This is the Linux Xen port. Enabling this will allow the
kernel to boot in a paravirtualized environment under the
config XEN_DOM0
def_bool y
depends on XEN && PCI_XEN && SWIOTLB_XEN
- depends on X86_LOCAL_APIC && X86_IO_APIC && ACPI && PCI
+ depends on X86_IO_APIC && ACPI && PCI
config XEN_PVHVM
def_bool y
* Description:
* Enables a low level driver to set a hard upper limit,
* max_hw_sectors, on the size of requests. max_hw_sectors is set by
- * the device driver based upon the combined capabilities of I/O
- * controller and storage device.
+ * the device driver based upon the capabilities of the I/O
+ * controller.
*
* max_sectors is a soft limit imposed by the block layer for
* filesystem type requests. This value can be overridden on a
struct scatterlist *cipher = areq_ctx->cipher;
struct scatterlist *hsg = areq_ctx->hsg;
struct scatterlist *tsg = areq_ctx->tsg;
- struct scatterlist *assoc1;
- struct scatterlist *assoc2;
unsigned int ivsize = crypto_aead_ivsize(authenc_esn);
unsigned int cryptlen = req->cryptlen;
struct page *dstp;
cryptlen += ivsize;
}
- if (sg_is_last(assoc))
- return -EINVAL;
-
- assoc1 = assoc + 1;
- if (sg_is_last(assoc1))
- return -EINVAL;
-
- assoc2 = assoc + 2;
- if (!sg_is_last(assoc2))
+ if (assoc->length < 12)
return -EINVAL;
sg_init_table(hsg, 2);
- sg_set_page(hsg, sg_page(assoc), assoc->length, assoc->offset);
- sg_set_page(hsg + 1, sg_page(assoc2), assoc2->length, assoc2->offset);
+ sg_set_page(hsg, sg_page(assoc), 4, assoc->offset);
+ sg_set_page(hsg + 1, sg_page(assoc), 4, assoc->offset + 8);
sg_init_table(tsg, 1);
- sg_set_page(tsg, sg_page(assoc1), assoc1->length, assoc1->offset);
+ sg_set_page(tsg, sg_page(assoc), 4, assoc->offset + 4);
areq_ctx->cryptlen = cryptlen;
- areq_ctx->headlen = assoc->length + assoc2->length;
- areq_ctx->trailen = assoc1->length;
+ areq_ctx->headlen = 8;
+ areq_ctx->trailen = 4;
areq_ctx->sg = dst;
areq_ctx->complete = authenc_esn_geniv_ahash_done;
struct scatterlist *cipher = areq_ctx->cipher;
struct scatterlist *hsg = areq_ctx->hsg;
struct scatterlist *tsg = areq_ctx->tsg;
- struct scatterlist *assoc1;
- struct scatterlist *assoc2;
unsigned int ivsize = crypto_aead_ivsize(authenc_esn);
struct page *srcp;
u8 *vsrc;
cryptlen += ivsize;
}
- if (sg_is_last(assoc))
- return -EINVAL;
-
- assoc1 = assoc + 1;
- if (sg_is_last(assoc1))
- return -EINVAL;
-
- assoc2 = assoc + 2;
- if (!sg_is_last(assoc2))
+ if (assoc->length < 12)
return -EINVAL;
sg_init_table(hsg, 2);
- sg_set_page(hsg, sg_page(assoc), assoc->length, assoc->offset);
- sg_set_page(hsg + 1, sg_page(assoc2), assoc2->length, assoc2->offset);
+ sg_set_page(hsg, sg_page(assoc), 4, assoc->offset);
+ sg_set_page(hsg + 1, sg_page(assoc), 4, assoc->offset + 8);
sg_init_table(tsg, 1);
- sg_set_page(tsg, sg_page(assoc1), assoc1->length, assoc1->offset);
+ sg_set_page(tsg, sg_page(assoc), 4, assoc->offset + 4);
areq_ctx->cryptlen = cryptlen;
- areq_ctx->headlen = assoc->length + assoc2->length;
- areq_ctx->trailen = assoc1->length;
+ areq_ctx->headlen = 8;
+ areq_ctx->trailen = 4;
areq_ctx->sg = src;
areq_ctx->complete = authenc_esn_verify_ahash_done;
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/types.h>
+#include <linux/workqueue.h>
#include <acpi/video.h>
ACPI_MODULE_NAME("video");
static bool backlight_notifier_registered;
static struct notifier_block backlight_nb;
+static struct work_struct backlight_notify_work;
static enum acpi_backlight_type acpi_backlight_cmdline = acpi_backlight_undef;
static enum acpi_backlight_type acpi_backlight_dmi = acpi_backlight_undef;
{ },
};
+/* This uses a workqueue to avoid various locking ordering issues */
+static void acpi_video_backlight_notify_work(struct work_struct *work)
+{
+ if (acpi_video_get_backlight_type() != acpi_backlight_video)
+ acpi_video_unregister_backlight();
+}
+
static int acpi_video_backlight_notify(struct notifier_block *nb,
unsigned long val, void *bd)
{
/* A raw bl registering may change video -> native */
if (backlight->props.type == BACKLIGHT_RAW &&
- val == BACKLIGHT_REGISTERED &&
- acpi_video_get_backlight_type() != acpi_backlight_video)
- acpi_video_unregister_backlight();
+ val == BACKLIGHT_REGISTERED)
+ schedule_work(&backlight_notify_work);
return NOTIFY_OK;
}
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, find_video, NULL,
&video_caps, NULL);
+ INIT_WORK(&backlight_notify_work,
+ acpi_video_backlight_notify_work);
backlight_nb.notifier_call = acpi_video_backlight_notify;
backlight_nb.priority = 0;
if (backlight_register_notifier(&backlight_nb) == 0)
* Other architectures (e.g., ARM) either do not support big endian, or
* else leave I/O in little endian mode.
*/
- if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
return __raw_readl(addr);
else
return readl_relaxed(addr);
static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
{
/* See brcm_sata_readreg() comments */
- if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
__raw_writel(val, addr);
else
writel_relaxed(val, addr);
priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
}
+#ifdef CONFIG_PM_SLEEP
static int brcm_ahci_suspend(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
brcm_sata_phys_enable(priv);
return ahci_platform_resume(dev);
}
+#endif
static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT(DRV_NAME),
* RETURNS:
* Block address read from @tf.
*/
-u64 ata_tf_read_block(const struct ata_taskfile *tf, struct ata_device *dev)
+u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
{
u64 block = 0;
- if (!dev || tf->flags & ATA_TFLAG_LBA) {
+ if (tf->flags & ATA_TFLAG_LBA) {
if (tf->flags & ATA_TFLAG_LBA48) {
block |= (u64)tf->hob_lbah << 40;
block |= (u64)tf->hob_lbam << 32;
return 0;
}
-static void ata_dev_config_sense_reporting(struct ata_device *dev)
-{
- unsigned int err_mask;
-
- if (!ata_id_has_sense_reporting(dev->id))
- return;
-
- if (ata_id_sense_reporting_enabled(dev->id))
- return;
-
- err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1);
- if (err_mask) {
- ata_dev_dbg(dev,
- "failed to enable Sense Data Reporting, Emask 0x%x\n",
- err_mask);
- }
-}
-
/**
* ata_dev_configure - Configure the specified ATA/ATAPI device
* @dev: Target device to configure
dev->devslp_timing[i] = sata_setting[j];
}
}
- ata_dev_config_sense_reporting(dev);
+
dev->cdb_len = 16;
}
tf->hob_lbah = buf[10];
tf->nsect = buf[12];
tf->hob_nsect = buf[13];
- if (ata_id_has_ncq_autosense(dev->id))
- tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
return 0;
}
return err_mask;
}
-/**
- * ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT
- * @dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to
- * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
- * @dfl_sense_key: default sense key to use
- *
- * Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK
- * SENSE. This function is EH helper.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * encoded sense data on success, 0 on failure or if sense data
- * is not available.
- */
-static u32 ata_eh_request_sense(struct ata_queued_cmd *qc,
- struct scsi_cmnd *cmd)
-{
- struct ata_device *dev = qc->dev;
- struct ata_taskfile tf;
- unsigned int err_mask;
-
- if (!cmd)
- return 0;
-
- DPRINTK("ATA request sense\n");
- ata_dev_warn(dev, "request sense\n");
- if (!ata_id_sense_reporting_enabled(dev->id)) {
- ata_dev_warn(qc->dev, "sense data reporting disabled\n");
- return 0;
- }
- ata_tf_init(dev, &tf);
-
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
- tf.command = ATA_CMD_REQ_SENSE_DATA;
- tf.protocol = ATA_PROT_NODATA;
-
- err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
- /*
- * ACS-4 states:
- * The device may set the SENSE DATA AVAILABLE bit to one in the
- * STATUS field and clear the ERROR bit to zero in the STATUS field
- * to indicate that the command returned completion without an error
- * and the sense data described in table 306 is available.
- *
- * IOW the 'ATA_SENSE' bit might not be set even though valid
- * sense data is available.
- * So check for both.
- */
- if ((tf.command & ATA_SENSE) ||
- tf.lbah != 0 || tf.lbam != 0 || tf.lbal != 0) {
- ata_scsi_set_sense(cmd, tf.lbah, tf.lbam, tf.lbal);
- qc->flags |= ATA_QCFLAG_SENSE_VALID;
- ata_dev_warn(dev, "sense data %02x/%02x/%02x\n",
- tf.lbah, tf.lbam, tf.lbal);
- } else {
- ata_dev_warn(dev, "request sense failed stat %02x emask %x\n",
- tf.command, err_mask);
- }
- return err_mask;
-}
-
/**
* atapi_eh_request_sense - perform ATAPI REQUEST_SENSE
* @dev: device to perform REQUEST_SENSE to
memcpy(&qc->result_tf, &tf, sizeof(tf));
qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
- if (qc->result_tf.auxiliary) {
- char sense_key, asc, ascq;
-
- sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
- asc = (qc->result_tf.auxiliary >> 8) & 0xff;
- ascq = qc->result_tf.auxiliary & 0xff;
- ata_dev_dbg(dev, "NCQ Autosense %02x/%02x/%02x\n",
- sense_key, asc, ascq);
- ata_scsi_set_sense(qc->scsicmd, sense_key, asc, ascq);
- ata_scsi_set_sense_information(qc->scsicmd, &qc->result_tf);
- qc->flags |= ATA_QCFLAG_SENSE_VALID;
- }
-
ehc->i.err_mask &= ~AC_ERR_DEV;
}
return ATA_EH_RESET;
}
- /*
- * Sense data reporting does not work if the
- * device fault bit is set.
- */
- if ((stat & ATA_SENSE) && !(stat & ATA_DF) &&
- !(qc->flags & ATA_QCFLAG_SENSE_VALID)) {
- if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) {
- tmp = ata_eh_request_sense(qc, qc->scsicmd);
- if (tmp)
- qc->err_mask |= tmp;
- else
- ata_scsi_set_sense_information(qc->scsicmd, tf);
- } else {
- ata_dev_warn(qc->dev, "sense data available but port frozen\n");
- }
- }
-
- /* Set by NCQ autosense or request sense above */
- if (qc->flags & ATA_QCFLAG_SENSE_VALID)
- return 0;
-
if (stat & (ATA_ERR | ATA_DF))
qc->err_mask |= AC_ERR_DEV;
else
#ifdef CONFIG_ATA_VERBOSE_ERROR
if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
- ATA_SENSE | ATA_ERR)) {
+ ATA_ERR)) {
if (res->command & ATA_BUSY)
ata_dev_err(qc->dev, "status: { Busy }\n");
else
- ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n",
+ ata_dev_err(qc->dev, "status: { %s%s%s%s}\n",
res->command & ATA_DRDY ? "DRDY " : "",
res->command & ATA_DF ? "DF " : "",
res->command & ATA_DRQ ? "DRQ " : "",
- res->command & ATA_SENSE ? "SENSE " : "",
res->command & ATA_ERR ? "ERR " : "");
}
ata_scsi_park_show, ata_scsi_park_store);
EXPORT_SYMBOL_GPL(dev_attr_unload_heads);
-void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
+static void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
{
- if (!cmd)
- return;
-
cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq);
}
-void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
- const struct ata_taskfile *tf)
-{
- u64 information;
-
- if (!cmd)
- return;
-
- information = ata_tf_read_block(tf, NULL);
- scsi_set_sense_information(cmd->sense_buffer, information);
-}
-
static ssize_t
ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
((cdb[2] & 0x20) || need_sense)) {
ata_gen_passthru_sense(qc);
} else {
- if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
- cmd->result = SAM_STAT_CHECK_CONDITION;
- } else if (!need_sense) {
+ if (!need_sense) {
cmd->result = SAM_STAT_GOOD;
} else {
/* TODO: decide which descriptor format to use
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
unsigned int tag);
-extern u64 ata_tf_read_block(const struct ata_taskfile *tf,
- struct ata_device *dev);
+extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
extern unsigned ata_exec_internal(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
int dma_dir, void *buf, unsigned int buflen,
struct scsi_host_template *sht);
extern void ata_scsi_scan_host(struct ata_port *ap, int sync);
extern int ata_scsi_offline_dev(struct ata_device *dev);
-extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq);
-extern void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
- const struct ata_taskfile *tf);
extern void ata_scsi_media_change_notify(struct ata_device *dev);
extern void ata_scsi_hotplug(struct work_struct *work);
extern void ata_schedule_scsi_eh(struct Scsi_Host *shost);
readl(mmio + PDC_SDRAM_CONTROL);
/* Turn on for ECC */
- pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
- PDC_DIMM_SPD_TYPE, &spd0);
+ if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
+ PDC_DIMM_SPD_TYPE, &spd0)) {
+ pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n",
+ PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
+ return 1;
+ }
if (spd0 == 0x02) {
data |= (0x01 << 16);
writel(data, mmio + PDC_SDRAM_CONTROL);
/* ECC initiliazation. */
- pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
- PDC_DIMM_SPD_TYPE, &spd0);
+ if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
+ PDC_DIMM_SPD_TYPE, &spd0)) {
+ pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n",
+ PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
+ return 1;
+ }
if (spd0 == 0x02) {
void *buf;
VPRINTK("Start ECC initialization\n");
BUG_ON(!imxtm->base);
imxtm->type = type;
+ imxtm->irq = irq;
_mxc_timer_init(imxtm);
}
ret = exynos5250_cpufreq_init(exynos_info);
} else {
pr_err("%s: Unknown SoC type\n", __func__);
- return -ENODEV;
+ ret = -ENODEV;
}
if (ret)
if (exynos_info->set_freq == NULL) {
dev_err(&pdev->dev, "No set_freq function (ERR)\n");
+ ret = -EINVAL;
goto err_vdd_arm;
}
arm_regulator = regulator_get(NULL, "vdd_arm");
if (IS_ERR(arm_regulator)) {
dev_err(&pdev->dev, "failed to get resource vdd_arm\n");
+ ret = -EINVAL;
goto err_vdd_arm;
}
regulator_put(arm_regulator);
err_vdd_arm:
kfree(exynos_info);
- return -EINVAL;
+ return ret;
}
static struct platform_driver exynos_cpufreq_platdrv = {
state->buflen_1;
u32 *sh_desc = ctx->sh_desc_fin, *desc;
dma_addr_t ptr = ctx->sh_desc_fin_dma;
- int sec4_sg_bytes;
+ int sec4_sg_bytes, sec4_sg_src_index;
int digestsize = crypto_ahash_digestsize(ahash);
struct ahash_edesc *edesc;
int ret = 0;
int sh_len;
- sec4_sg_bytes = (1 + (buflen ? 1 : 0)) * sizeof(struct sec4_sg_entry);
+ sec4_sg_src_index = 1 + (buflen ? 1 : 0);
+ sec4_sg_bytes = sec4_sg_src_index * sizeof(struct sec4_sg_entry);
/* allocate space for base edesc and hw desc commands, link tables */
edesc = kmalloc(sizeof(struct ahash_edesc) + DESC_JOB_IO_LEN +
state->buf_dma = try_buf_map_to_sec4_sg(jrdev, edesc->sec4_sg + 1,
buf, state->buf_dma, buflen,
last_buflen);
- (edesc->sec4_sg + sec4_sg_bytes - 1)->len |= SEC4_SG_LEN_FIN;
+ (edesc->sec4_sg + sec4_sg_src_index - 1)->len |= SEC4_SG_LEN_FIN;
edesc->sec4_sg_dma = dma_map_single(jrdev, edesc->sec4_sg,
sec4_sg_bytes, DMA_TO_DEVICE);
struct sha256_state *sctx = shash_desc_ctx(desc);
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
- struct nx_sg *in_sg;
struct nx_sg *out_sg;
u64 to_process = 0, leftover, total;
unsigned long irq_flags;
NX_CPB_FDM(csbcpb) |= NX_FDM_INTERMEDIATE;
NX_CPB_FDM(csbcpb) |= NX_FDM_CONTINUATION;
- in_sg = nx_ctx->in_sg;
max_sg_len = min_t(u64, nx_ctx->ap->sglen,
nx_driver.of.max_sg_len/sizeof(struct nx_sg));
max_sg_len = min_t(u64, max_sg_len,
}
do {
- /*
- * to_process: the SHA256_BLOCK_SIZE data chunk to process in
- * this update. This value is also restricted by the sg list
- * limits.
- */
- to_process = total - to_process;
- to_process = to_process & ~(SHA256_BLOCK_SIZE - 1);
+ int used_sgs = 0;
+ struct nx_sg *in_sg = nx_ctx->in_sg;
if (buf_len) {
data_len = buf_len;
- in_sg = nx_build_sg_list(nx_ctx->in_sg,
+ in_sg = nx_build_sg_list(in_sg,
(u8 *) sctx->buf,
&data_len,
max_sg_len);
rc = -EINVAL;
goto out;
}
+ used_sgs = in_sg - nx_ctx->in_sg;
}
+ /* to_process: SHA256_BLOCK_SIZE aligned chunk to be
+ * processed in this iteration. This value is restricted
+ * by sg list limits and number of sgs we already used
+ * for leftover data. (see above)
+ * In ideal case, we could allow NX_PAGE_SIZE * max_sg_len,
+ * but because data may not be aligned, we need to account
+ * for that too. */
+ to_process = min_t(u64, total,
+ (max_sg_len - 1 - used_sgs) * NX_PAGE_SIZE);
+ to_process = to_process & ~(SHA256_BLOCK_SIZE - 1);
+
data_len = to_process - buf_len;
in_sg = nx_build_sg_list(in_sg, (u8 *) data,
&data_len, max_sg_len);
nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) * sizeof(struct nx_sg);
- to_process = (data_len + buf_len);
+ to_process = data_len + buf_len;
leftover = total - to_process;
/*
struct sha512_state *sctx = shash_desc_ctx(desc);
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
- struct nx_sg *in_sg;
struct nx_sg *out_sg;
u64 to_process, leftover = 0, total;
unsigned long irq_flags;
NX_CPB_FDM(csbcpb) |= NX_FDM_INTERMEDIATE;
NX_CPB_FDM(csbcpb) |= NX_FDM_CONTINUATION;
- in_sg = nx_ctx->in_sg;
max_sg_len = min_t(u64, nx_ctx->ap->sglen,
nx_driver.of.max_sg_len/sizeof(struct nx_sg));
max_sg_len = min_t(u64, max_sg_len,
}
do {
- /*
- * to_process: the SHA512_BLOCK_SIZE data chunk to process in
- * this update. This value is also restricted by the sg list
- * limits.
- */
- to_process = total - leftover;
- to_process = to_process & ~(SHA512_BLOCK_SIZE - 1);
- leftover = total - to_process;
+ int used_sgs = 0;
+ struct nx_sg *in_sg = nx_ctx->in_sg;
if (buf_len) {
data_len = buf_len;
- in_sg = nx_build_sg_list(nx_ctx->in_sg,
+ in_sg = nx_build_sg_list(in_sg,
(u8 *) sctx->buf,
&data_len, max_sg_len);
rc = -EINVAL;
goto out;
}
+ used_sgs = in_sg - nx_ctx->in_sg;
}
+ /* to_process: SHA512_BLOCK_SIZE aligned chunk to be
+ * processed in this iteration. This value is restricted
+ * by sg list limits and number of sgs we already used
+ * for leftover data. (see above)
+ * In ideal case, we could allow NX_PAGE_SIZE * max_sg_len,
+ * but because data may not be aligned, we need to account
+ * for that too. */
+ to_process = min_t(u64, total,
+ (max_sg_len - 1 - used_sgs) * NX_PAGE_SIZE);
+ to_process = to_process & ~(SHA512_BLOCK_SIZE - 1);
+
data_len = to_process - buf_len;
in_sg = nx_build_sg_list(in_sg, (u8 *) data,
&data_len, max_sg_len);
goto out;
}
- to_process = (data_len + buf_len);
+ to_process = data_len + buf_len;
leftover = total - to_process;
/*
struct dma_chan *ch = dma_request_slave_channel_reason(dev, name);
if (IS_ERR(ch))
return NULL;
+
+ dma_cap_set(DMA_PRIVATE, ch->device->cap_mask);
+ ch->device->privatecnt++;
+
return ch;
}
EXPORT_SYMBOL_GPL(dma_request_slave_channel);
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int atmel_hlcdc_dc_drm_suspend(struct device *dev)
{
struct drm_device *drm_dev = dev_get_drvdata(dev);
from an EDID retrieval */
if (port->connector) {
mutex_lock(&mgr->destroy_connector_lock);
- list_add(&port->connector->destroy_list, &mgr->destroy_connector_list);
+ list_add(&port->next, &mgr->destroy_connector_list);
mutex_unlock(&mgr->destroy_connector_lock);
schedule_work(&mgr->destroy_connector_work);
+ return;
}
drm_dp_port_teardown_pdt(port, port->pdt);
static void drm_dp_destroy_connector_work(struct work_struct *work)
{
struct drm_dp_mst_topology_mgr *mgr = container_of(work, struct drm_dp_mst_topology_mgr, destroy_connector_work);
- struct drm_connector *connector;
+ struct drm_dp_mst_port *port;
/*
* Not a regular list traverse as we have to drop the destroy
*/
for (;;) {
mutex_lock(&mgr->destroy_connector_lock);
- connector = list_first_entry_or_null(&mgr->destroy_connector_list, struct drm_connector, destroy_list);
- if (!connector) {
+ port = list_first_entry_or_null(&mgr->destroy_connector_list, struct drm_dp_mst_port, next);
+ if (!port) {
mutex_unlock(&mgr->destroy_connector_lock);
break;
}
- list_del(&connector->destroy_list);
+ list_del(&port->next);
mutex_unlock(&mgr->destroy_connector_lock);
- mgr->cbs->destroy_connector(mgr, connector);
+ mgr->cbs->destroy_connector(mgr, port->connector);
+
+ drm_dp_port_teardown_pdt(port, port->pdt);
+
+ if (!port->input && port->vcpi.vcpi > 0)
+ drm_dp_mst_put_payload_id(mgr, port->vcpi.vcpi);
+ kfree(port);
}
}
struct drm_atomic_state *state,
bool async)
{
- int ret;
- int i;
+ struct drm_crtc_state *crtc_state;
+ struct drm_crtc *crtc;
+ int ret, i;
if (async) {
DRM_DEBUG_KMS("i915 does not yet support async commit\n");
return ret;
/* Point of no return */
-
- /*
- * FIXME: The proper sequence here will eventually be:
- *
- * drm_atomic_helper_swap_state(dev, state)
- * drm_atomic_helper_commit_modeset_disables(dev, state);
- * drm_atomic_helper_commit_planes(dev, state);
- * drm_atomic_helper_commit_modeset_enables(dev, state);
- * drm_atomic_helper_wait_for_vblanks(dev, state);
- * drm_atomic_helper_cleanup_planes(dev, state);
- * drm_atomic_state_free(state);
- *
- * once we have full atomic modeset. For now, just manually update
- * plane states to avoid clobbering good states with dummy states
- * while nuclear pageflipping.
- */
- for (i = 0; i < dev->mode_config.num_total_plane; i++) {
- struct drm_plane *plane = state->planes[i];
-
- if (!plane)
- continue;
-
- plane->state->state = state;
- swap(state->plane_states[i], plane->state);
- plane->state->state = NULL;
- }
+ drm_atomic_helper_swap_state(dev, state);
/* swap crtc_scaler_state */
- for (i = 0; i < dev->mode_config.num_crtc; i++) {
- struct drm_crtc *crtc = state->crtcs[i];
- if (!crtc) {
- continue;
- }
-
- to_intel_crtc(crtc)->config->scaler_state =
- to_intel_crtc_state(state->crtc_states[i])->scaler_state;
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);
if (INTEL_INFO(dev)->gen >= 9)
skl_detach_scalers(to_intel_crtc(crtc));
+
+ drm_atomic_helper_commit_planes_on_crtc(crtc_state);
}
- drm_atomic_helper_commit_planes(dev, state);
drm_atomic_helper_wait_for_vblanks(dev, state);
drm_atomic_helper_cleanup_planes(dev, state);
drm_atomic_state_free(state);
const union child_device_config *p_child;
union child_device_config *child_dev_ptr;
int i, child_device_num, count;
- u8 expected_size;
- u16 block_size;
+ u16 block_size;
p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
if (!p_defs) {
DRM_DEBUG_KMS("No general definition block is found, no devices defined.\n");
return;
}
- if (bdb->version < 195) {
- expected_size = 33;
- } else if (bdb->version == 195) {
- expected_size = 37;
- } else if (bdb->version <= 197) {
- expected_size = 38;
- } else {
- expected_size = 38;
- DRM_DEBUG_DRIVER("Expected child_device_config size for BDB version %u not known; assuming %u\n",
- expected_size, bdb->version);
- }
-
- if (expected_size > sizeof(*p_child)) {
- DRM_ERROR("child_device_config cannot fit in p_child\n");
- return;
- }
-
- if (p_defs->child_dev_size != expected_size) {
- DRM_ERROR("Size mismatch; child_device_config size=%u (expected %u); bdb->version: %u\n",
- p_defs->child_dev_size, expected_size, bdb->version);
+ if (p_defs->child_dev_size < sizeof(*p_child)) {
+ DRM_ERROR("General definiton block child device size is too small.\n");
return;
}
/* get the block size of general definitions */
child_dev_ptr = dev_priv->vbt.child_dev + count;
count++;
- memcpy(child_dev_ptr, p_child, p_defs->child_dev_size);
+ memcpy(child_dev_ptr, p_child, sizeof(*p_child));
}
return;
}
goto encoder_retry;
}
- pipe_config->dither = pipe_config->pipe_bpp != base_bpp;
+ /* Dithering seems to not pass-through bits correctly when it should, so
+ * only enable it on 6bpc panels. */
+ pipe_config->dither = pipe_config->pipe_bpp == 6*3;
DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
modeset_update_crtc_power_domains(state);
- drm_atomic_helper_commit_planes(dev, state);
-
/* Now enable the clocks, plane, pipe, and connectors that we set up. */
for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (!needs_modeset(crtc->state) || !crtc->state->enable)
+ if (!needs_modeset(crtc->state) || !crtc->state->enable) {
+ drm_atomic_helper_commit_planes_on_crtc(crtc_state);
continue;
+ }
update_scanline_offset(to_intel_crtc(crtc));
dev_priv->display.crtc_enable(crtc);
- intel_crtc_enable_planes(crtc);
+ drm_atomic_helper_commit_planes_on_crtc(crtc_state);
}
/* FIXME: add subpixel order */
return 0;
}
-static bool primary_plane_visible(struct drm_crtc *crtc)
-{
- struct intel_plane_state *plane_state =
- to_intel_plane_state(crtc->primary->state);
-
- return plane_state->visible;
-}
-
static int intel_crtc_set_config(struct drm_mode_set *set)
{
struct drm_device *dev;
struct drm_atomic_state *state = NULL;
struct intel_crtc_state *pipe_config;
- bool primary_plane_was_visible;
int ret;
BUG_ON(!set);
intel_update_pipe_size(to_intel_crtc(set->crtc));
- primary_plane_was_visible = primary_plane_visible(set->crtc);
-
ret = intel_set_mode_with_config(set->crtc, pipe_config, true);
- if (ret == 0 &&
- pipe_config->base.enable &&
- pipe_config->base.planes_changed &&
- !needs_modeset(&pipe_config->base)) {
- struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
-
- /*
- * We need to make sure the primary plane is re-enabled if it
- * has previously been turned off.
- */
- if (ret == 0 && !primary_plane_was_visible &&
- primary_plane_visible(set->crtc)) {
- WARN_ON(!intel_crtc->active);
- intel_post_enable_primary(set->crtc);
- }
-
- /*
- * In the fastboot case this may be our only check of the
- * state after boot. It would be better to only do it on
- * the first update, but we don't have a nice way of doing that
- * (and really, set_config isn't used much for high freq page
- * flipping, so increasing its cost here shouldn't be a big
- * deal).
- */
- if (i915.fastboot && ret == 0)
- intel_modeset_check_state(set->crtc->dev);
- }
-
if (ret) {
DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n",
set->crtc->base.id, ret);
*/
if (IS_BROADWELL(dev))
intel_crtc->atomic.wait_vblank = true;
+
+ if (crtc_state)
+ intel_crtc->atomic.post_enable_primary = true;
}
/*
if (!state->visible || !fb)
intel_crtc->atomic.disable_ips = true;
+ if (!state->visible && old_state->visible &&
+ crtc_state && !needs_modeset(&crtc_state->base))
+ intel_crtc->atomic.pre_disable_primary = true;
+
intel_crtc->atomic.fb_bits |=
INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
struct intel_plane_state *plane_state;
memset(crtc->config, 0, sizeof(*crtc->config));
+ crtc->config->base.crtc = &crtc->base;
crtc->config->quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE;
static const int skl_rates[] = { 162000, 216000, 270000,
324000, 432000, 540000 };
-static const int chv_rates[] = { 162000, 202500, 210000, 216000,
- 243000, 270000, 324000, 405000,
- 420000, 432000, 540000 };
static const int default_rates[] = { 162000, 270000, 540000 };
/**
return (intel_dp_max_link_bw(intel_dp) >> 3) + 1;
}
+static bool intel_dp_source_supports_hbr2(struct drm_device *dev)
+{
+ /* WaDisableHBR2:skl */
+ if (IS_SKYLAKE(dev) && INTEL_REVID(dev) <= SKL_REVID_B0)
+ return false;
+
+ if ((IS_HASWELL(dev) && !IS_HSW_ULX(dev)) || IS_BROADWELL(dev) ||
+ (INTEL_INFO(dev)->gen >= 9))
+ return true;
+ else
+ return false;
+}
+
static int
intel_dp_source_rates(struct drm_device *dev, const int **source_rates)
{
if (IS_SKYLAKE(dev)) {
*source_rates = skl_rates;
return ARRAY_SIZE(skl_rates);
- } else if (IS_CHERRYVIEW(dev)) {
- *source_rates = chv_rates;
- return ARRAY_SIZE(chv_rates);
}
*source_rates = default_rates;
- if (IS_SKYLAKE(dev) && INTEL_REVID(dev) <= SKL_REVID_B0)
- /* WaDisableHBR2:skl */
- return (DP_LINK_BW_2_7 >> 3) + 1;
- else if (INTEL_INFO(dev)->gen >= 8 ||
- (IS_HASWELL(dev) && !IS_HSW_ULX(dev)))
+ /* This depends on the fact that 5.4 is last value in the array */
+ if (intel_dp_source_supports_hbr2(dev))
return (DP_LINK_BW_5_4 >> 3) + 1;
else
return (DP_LINK_BW_2_7 >> 3) + 1;
}
}
- /* Training Pattern 3 support, both source and sink */
+ /* Training Pattern 3 support, Intel platforms that support HBR2 alone
+ * have support for TP3 hence that check is used along with dpcd check
+ * to ensure TP3 can be enabled.
+ * SKL < B0: due it's WaDisableHBR2 is the only exception where TP3 is
+ * supported but still not enabled.
+ */
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x12 &&
intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED &&
- (IS_HASWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 8)) {
+ intel_dp_source_supports_hbr2(dev)) {
intel_dp->use_tps3 = true;
DRM_DEBUG_KMS("Displayport TPS3 supported\n");
} else
ret = intel_pin_and_map_ringbuffer_obj(ring->dev, ringbuf);
if (ret)
goto unpin_ctx_obj;
+
+ ctx_obj->dirty = true;
}
return ret;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
+ /* we can race here at startup, some boards seem to trigger
+ * hotplug irqs when they shouldn't. */
+ if (!rdev->mode_info.mode_config_initialized)
+ return;
+
mutex_lock(&mode_config->mutex);
if (mode_config->num_connector) {
list_for_each_entry(connector, &mode_config->connector_list, head)
printk(KERN_ERR MOD
"Unexpected cqe_status 0x%x for QPID=0x%0x\n",
CQE_STATUS(&cqe), CQE_QPID(&cqe));
- ret = -EINVAL;
+ wc->status = IB_WC_FATAL_ERR;
}
}
out:
* convert it to descriptor.
*/
if (!button->gpiod && gpio_is_valid(button->gpio)) {
- unsigned flags = 0;
+ unsigned flags = GPIOF_IN;
if (button->active_low)
flags |= GPIOF_ACTIVE_LOW;
.irq_mask = irq_chip_mask_parent,
.irq_unmask = irq_chip_unmask_parent,
.irq_retrigger = irq_chip_retrigger_hierarchy,
- .irq_set_wake = irq_chip_set_wake_parent,
+ .irq_set_type = irq_chip_set_type_parent,
+ .flags = IRQCHIP_MASK_ON_SUSPEND |
+ IRQCHIP_SKIP_SET_WAKE,
#ifdef CONFIG_SMP
.irq_set_affinity = irq_chip_set_affinity_parent,
#endif
config DVB_TS2020
tristate "Montage Tehnology TS2020 based tuners"
- depends on DVB_CORE
+ depends on DVB_CORE && I2C
select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
tristate "Cisco Cobalt support"
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
depends on PCI_MSI && MTD_COMPLEX_MAPPINGS && GPIOLIB
+ depends on SND
select I2C_ALGOBIT
select VIDEO_ADV7604
select VIDEO_ADV7511
also know about dropped frames. */
cb->vb.v4l2_buf.sequence = s->sequence++;
vb2_buffer_done(&cb->vb, (skip || s->unstable_frame) ?
- VB2_BUF_STATE_QUEUED : VB2_BUF_STATE_DONE);
+ VB2_BUF_STATE_REQUEUEING : VB2_BUF_STATE_DONE);
}
irqreturn_t cobalt_irq_handler(int irq, void *dev_id)
int mantis_dma_init(struct mantis_pci *mantis)
{
- int err = 0;
+ int err;
dprintk(MANTIS_DEBUG, 1, "Mantis DMA init");
- if (mantis_alloc_buffers(mantis) < 0) {
+ err = mantis_alloc_buffers(mantis);
+ if (err < 0) {
dprintk(MANTIS_ERROR, 1, "Error allocating DMA buffer");
/* Stop RISC Engine */
return -EINVAL;
}
-static struct ir_raw_timings_manchester ir_rc5_timings = {
- .leader = RC5_UNIT,
- .pulse_space_start = 0,
- .clock = RC5_UNIT,
- .trailer_space = RC5_UNIT * 10,
-};
-
-static struct ir_raw_timings_manchester ir_rc5x_timings[2] = {
- {
- .leader = RC5_UNIT,
- .pulse_space_start = 0,
- .clock = RC5_UNIT,
- .trailer_space = RC5X_SPACE,
- },
- {
- .clock = RC5_UNIT,
- .trailer_space = RC5_UNIT * 10,
- },
-};
-
-static struct ir_raw_timings_manchester ir_rc5_sz_timings = {
- .leader = RC5_UNIT,
- .pulse_space_start = 0,
- .clock = RC5_UNIT,
- .trailer_space = RC5_UNIT * 10,
-};
-
-static int ir_rc5_validate_filter(const struct rc_scancode_filter *scancode,
- unsigned int important_bits)
-{
- /* all important bits of scancode should be set in mask */
- if (~scancode->mask & important_bits)
- return -EINVAL;
- /* extra bits in mask should be zero in data */
- if (scancode->mask & scancode->data & ~important_bits)
- return -EINVAL;
- return 0;
-}
-
-/**
- * ir_rc5_encode() - Encode a scancode as a stream of raw events
- *
- * @protocols: allowed protocols
- * @scancode: scancode filter describing scancode (helps distinguish between
- * protocol subtypes when scancode is ambiguous)
- * @events: array of raw ir events to write into
- * @max: maximum size of @events
- *
- * Returns: The number of events written.
- * -ENOBUFS if there isn't enough space in the array to fit the
- * encoding. In this case all @max events will have been written.
- * -EINVAL if the scancode is ambiguous or invalid.
- */
-static int ir_rc5_encode(u64 protocols,
- const struct rc_scancode_filter *scancode,
- struct ir_raw_event *events, unsigned int max)
-{
- int ret;
- struct ir_raw_event *e = events;
- unsigned int data, xdata, command, commandx, system;
-
- /* Detect protocol and convert scancode to raw data */
- if (protocols & RC_BIT_RC5 &&
- !ir_rc5_validate_filter(scancode, 0x1f7f)) {
- /* decode scancode */
- command = (scancode->data & 0x003f) >> 0;
- commandx = (scancode->data & 0x0040) >> 6;
- system = (scancode->data & 0x1f00) >> 8;
- /* encode data */
- data = !commandx << 12 | system << 6 | command;
-
- /* Modulate the data */
- ret = ir_raw_gen_manchester(&e, max, &ir_rc5_timings, RC5_NBITS,
- data);
- if (ret < 0)
- return ret;
- } else if (protocols & RC_BIT_RC5X &&
- !ir_rc5_validate_filter(scancode, 0x1f7f3f)) {
- /* decode scancode */
- xdata = (scancode->data & 0x00003f) >> 0;
- command = (scancode->data & 0x003f00) >> 8;
- commandx = (scancode->data & 0x004000) >> 14;
- system = (scancode->data & 0x1f0000) >> 16;
- /* commandx and system overlap, bits must match when encoded */
- if (commandx == (system & 0x1))
- return -EINVAL;
- /* encode data */
- data = 1 << 18 | system << 12 | command << 6 | xdata;
-
- /* Modulate the data */
- ret = ir_raw_gen_manchester(&e, max, &ir_rc5x_timings[0],
- CHECK_RC5X_NBITS,
- data >> (RC5X_NBITS-CHECK_RC5X_NBITS));
- if (ret < 0)
- return ret;
- ret = ir_raw_gen_manchester(&e, max - (e - events),
- &ir_rc5x_timings[1],
- RC5X_NBITS - CHECK_RC5X_NBITS,
- data);
- if (ret < 0)
- return ret;
- } else if (protocols & RC_BIT_RC5_SZ &&
- !ir_rc5_validate_filter(scancode, 0x2fff)) {
- /* RC5-SZ scancode is raw enough for Manchester as it is */
- ret = ir_raw_gen_manchester(&e, max, &ir_rc5_sz_timings,
- RC5_SZ_NBITS, scancode->data & 0x2fff);
- if (ret < 0)
- return ret;
- } else {
- return -EINVAL;
- }
-
- return e - events;
-}
-
static struct ir_raw_handler rc5_handler = {
.protocols = RC_BIT_RC5 | RC_BIT_RC5X | RC_BIT_RC5_SZ,
.decode = ir_rc5_decode,
- .encode = ir_rc5_encode,
};
static int __init ir_rc5_decode_init(void)
return -EINVAL;
}
-static struct ir_raw_timings_manchester ir_rc6_timings[4] = {
- {
- .leader = RC6_PREFIX_PULSE,
- .pulse_space_start = 0,
- .clock = RC6_UNIT,
- .invert = 1,
- .trailer_space = RC6_PREFIX_SPACE,
- },
- {
- .clock = RC6_UNIT,
- .invert = 1,
- },
- {
- .clock = RC6_UNIT * 2,
- .invert = 1,
- },
- {
- .clock = RC6_UNIT,
- .invert = 1,
- .trailer_space = RC6_SUFFIX_SPACE,
- },
-};
-
-static int ir_rc6_validate_filter(const struct rc_scancode_filter *scancode,
- unsigned int important_bits)
-{
- /* all important bits of scancode should be set in mask */
- if (~scancode->mask & important_bits)
- return -EINVAL;
- /* extra bits in mask should be zero in data */
- if (scancode->mask & scancode->data & ~important_bits)
- return -EINVAL;
- return 0;
-}
-
-/**
- * ir_rc6_encode() - Encode a scancode as a stream of raw events
- *
- * @protocols: allowed protocols
- * @scancode: scancode filter describing scancode (helps distinguish between
- * protocol subtypes when scancode is ambiguous)
- * @events: array of raw ir events to write into
- * @max: maximum size of @events
- *
- * Returns: The number of events written.
- * -ENOBUFS if there isn't enough space in the array to fit the
- * encoding. In this case all @max events will have been written.
- * -EINVAL if the scancode is ambiguous or invalid.
- */
-static int ir_rc6_encode(u64 protocols,
- const struct rc_scancode_filter *scancode,
- struct ir_raw_event *events, unsigned int max)
-{
- int ret;
- struct ir_raw_event *e = events;
-
- if (protocols & RC_BIT_RC6_0 &&
- !ir_rc6_validate_filter(scancode, 0xffff)) {
-
- /* Modulate the preamble */
- ret = ir_raw_gen_manchester(&e, max, &ir_rc6_timings[0], 0, 0);
- if (ret < 0)
- return ret;
-
- /* Modulate the header (Start Bit & Mode-0) */
- ret = ir_raw_gen_manchester(&e, max - (e - events),
- &ir_rc6_timings[1],
- RC6_HEADER_NBITS, (1 << 3));
- if (ret < 0)
- return ret;
-
- /* Modulate Trailer Bit */
- ret = ir_raw_gen_manchester(&e, max - (e - events),
- &ir_rc6_timings[2], 1, 0);
- if (ret < 0)
- return ret;
-
- /* Modulate rest of the data */
- ret = ir_raw_gen_manchester(&e, max - (e - events),
- &ir_rc6_timings[3], RC6_0_NBITS,
- scancode->data);
- if (ret < 0)
- return ret;
-
- } else if (protocols & (RC_BIT_RC6_6A_20 | RC_BIT_RC6_6A_24 |
- RC_BIT_RC6_6A_32 | RC_BIT_RC6_MCE) &&
- !ir_rc6_validate_filter(scancode, 0x8fffffff)) {
-
- /* Modulate the preamble */
- ret = ir_raw_gen_manchester(&e, max, &ir_rc6_timings[0], 0, 0);
- if (ret < 0)
- return ret;
-
- /* Modulate the header (Start Bit & Header-version 6 */
- ret = ir_raw_gen_manchester(&e, max - (e - events),
- &ir_rc6_timings[1],
- RC6_HEADER_NBITS, (1 << 3 | 6));
- if (ret < 0)
- return ret;
-
- /* Modulate Trailer Bit */
- ret = ir_raw_gen_manchester(&e, max - (e - events),
- &ir_rc6_timings[2], 1, 0);
- if (ret < 0)
- return ret;
-
- /* Modulate rest of the data */
- ret = ir_raw_gen_manchester(&e, max - (e - events),
- &ir_rc6_timings[3],
- fls(scancode->mask),
- scancode->data);
- if (ret < 0)
- return ret;
-
- } else {
- return -EINVAL;
- }
-
- return e - events;
-}
-
static struct ir_raw_handler rc6_handler = {
.protocols = RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 |
RC_BIT_RC6_6A_24 | RC_BIT_RC6_6A_32 |
RC_BIT_RC6_MCE,
.decode = ir_rc6_decode,
- .encode = ir_rc6_encode,
};
static int __init ir_rc6_decode_init(void)
return 0;
}
-static int nvt_write_wakeup_codes(struct rc_dev *dev,
- const u8 *wakeup_sample_buf, int count)
-{
- int i = 0;
- u8 reg, reg_learn_mode;
- unsigned long flags;
- struct nvt_dev *nvt = dev->priv;
-
- nvt_dbg_wake("writing wakeup samples");
-
- reg = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRCON);
- reg_learn_mode = reg & ~CIR_WAKE_IRCON_MODE0;
- reg_learn_mode |= CIR_WAKE_IRCON_MODE1;
-
- /* Lock the learn area to prevent racing with wake-isr */
- spin_lock_irqsave(&nvt->nvt_lock, flags);
-
- /* Enable fifo writes */
- nvt_cir_wake_reg_write(nvt, reg_learn_mode, CIR_WAKE_IRCON);
-
- /* Clear cir wake rx fifo */
- nvt_clear_cir_wake_fifo(nvt);
-
- if (count > WAKE_FIFO_LEN) {
- nvt_dbg_wake("HW FIFO too small for all wake samples");
- count = WAKE_FIFO_LEN;
- }
-
- if (count)
- pr_info("Wake samples (%d) =", count);
- else
- pr_info("Wake sample fifo cleared");
-
- /* Write wake samples to fifo */
- for (i = 0; i < count; i++) {
- pr_cont(" %02x", wakeup_sample_buf[i]);
- nvt_cir_wake_reg_write(nvt, wakeup_sample_buf[i],
- CIR_WAKE_WR_FIFO_DATA);
- }
- pr_cont("\n");
-
- /* Switch cir to wakeup mode and disable fifo writing */
- nvt_cir_wake_reg_write(nvt, reg, CIR_WAKE_IRCON);
-
- /* Set number of bytes needed for wake */
- nvt_cir_wake_reg_write(nvt, count ? count :
- CIR_WAKE_FIFO_CMP_BYTES,
- CIR_WAKE_FIFO_CMP_DEEP);
-
- spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-
- return 0;
-}
-
-static int nvt_ir_raw_set_wakeup_filter(struct rc_dev *dev,
- struct rc_scancode_filter *sc_filter)
-{
- u8 *reg_buf;
- u8 buf_val;
- int i, ret, count;
- unsigned int val;
- struct ir_raw_event *raw;
- bool complete;
-
- /* Require both mask and data to be set before actually committing */
- if (!sc_filter->mask || !sc_filter->data)
- return 0;
-
- raw = kmalloc_array(WAKE_FIFO_LEN, sizeof(*raw), GFP_KERNEL);
- if (!raw)
- return -ENOMEM;
-
- ret = ir_raw_encode_scancode(dev->enabled_wakeup_protocols, sc_filter,
- raw, WAKE_FIFO_LEN);
- complete = (ret != -ENOBUFS);
- if (!complete)
- ret = WAKE_FIFO_LEN;
- else if (ret < 0)
- goto out_raw;
-
- reg_buf = kmalloc_array(WAKE_FIFO_LEN, sizeof(*reg_buf), GFP_KERNEL);
- if (!reg_buf) {
- ret = -ENOMEM;
- goto out_raw;
- }
-
- /* Inspect the ir samples */
- for (i = 0, count = 0; i < ret && count < WAKE_FIFO_LEN; ++i) {
- val = NS_TO_US((raw[i]).duration) / SAMPLE_PERIOD;
-
- /* Split too large values into several smaller ones */
- while (val > 0 && count < WAKE_FIFO_LEN) {
-
- /* Skip last value for better comparison tolerance */
- if (complete && i == ret - 1 && val < BUF_LEN_MASK)
- break;
-
- /* Clamp values to BUF_LEN_MASK at most */
- buf_val = (val > BUF_LEN_MASK) ? BUF_LEN_MASK : val;
-
- reg_buf[count] = buf_val;
- val -= buf_val;
- if ((raw[i]).pulse)
- reg_buf[count] |= BUF_PULSE_BIT;
- count++;
- }
- }
-
- ret = nvt_write_wakeup_codes(dev, reg_buf, count);
-
- kfree(reg_buf);
-out_raw:
- kfree(raw);
-
- return ret;
-}
-
-/* Dummy implementation. nuvoton is agnostic to the protocol used */
-static int nvt_ir_raw_change_wakeup_protocol(struct rc_dev *dev,
- u64 *rc_type)
-{
- return 0;
-}
-
/*
* nvt_tx_ir
*
/* Set up the rc device */
rdev->priv = nvt;
rdev->driver_type = RC_DRIVER_IR_RAW;
- rdev->encode_wakeup = true;
rdev->allowed_protocols = RC_BIT_ALL;
rdev->open = nvt_open;
rdev->close = nvt_close;
rdev->tx_ir = nvt_tx_ir;
rdev->s_tx_carrier = nvt_set_tx_carrier;
- rdev->s_wakeup_filter = nvt_ir_raw_set_wakeup_filter;
- rdev->change_wakeup_protocol = nvt_ir_raw_change_wakeup_protocol;
rdev->input_name = "Nuvoton w836x7hg Infrared Remote Transceiver";
rdev->input_phys = "nuvoton/cir0";
rdev->input_id.bustype = BUS_HOST;
*/
#define TX_BUF_LEN 256
#define RX_BUF_LEN 32
-#define WAKE_FIFO_LEN 67
struct nvt_dev {
struct pnp_dev *pdev;
u64 protocols; /* which are handled by this handler */
int (*decode)(struct rc_dev *dev, struct ir_raw_event event);
- int (*encode)(u64 protocols, const struct rc_scancode_filter *scancode,
- struct ir_raw_event *events, unsigned int max);
/* These two should only be used by the lirc decoder */
int (*raw_register)(struct rc_dev *dev);
#define TO_US(duration) DIV_ROUND_CLOSEST((duration), 1000)
#define TO_STR(is_pulse) ((is_pulse) ? "pulse" : "space")
-/* functions for IR encoders */
-
-static inline void init_ir_raw_event_duration(struct ir_raw_event *ev,
- unsigned int pulse,
- u32 duration)
-{
- init_ir_raw_event(ev);
- ev->duration = duration;
- ev->pulse = pulse;
-}
-
-/**
- * struct ir_raw_timings_manchester - Manchester coding timings
- * @leader: duration of leader pulse (if any) 0 if continuing
- * existing signal (see @pulse_space_start)
- * @pulse_space_start: 1 for starting with pulse (0 for starting with space)
- * @clock: duration of each pulse/space in ns
- * @invert: if set clock logic is inverted
- * (0 = space + pulse, 1 = pulse + space)
- * @trailer_space: duration of trailer space in ns
- */
-struct ir_raw_timings_manchester {
- unsigned int leader;
- unsigned int pulse_space_start:1;
- unsigned int clock;
- unsigned int invert:1;
- unsigned int trailer_space;
-};
-
-int ir_raw_gen_manchester(struct ir_raw_event **ev, unsigned int max,
- const struct ir_raw_timings_manchester *timings,
- unsigned int n, unsigned int data);
-
/*
* Routines from rc-raw.c to be used internally and by decoders
*/
u64 ir_raw_get_allowed_protocols(void);
-u64 ir_raw_get_encode_protocols(void);
int ir_raw_event_register(struct rc_dev *dev);
void ir_raw_event_unregister(struct rc_dev *dev);
int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
static DEFINE_MUTEX(ir_raw_handler_lock);
static LIST_HEAD(ir_raw_handler_list);
static u64 available_protocols;
-static u64 encode_protocols;
static int ir_raw_event_thread(void *data)
{
return protocols;
}
-/* used internally by the sysfs interface */
-u64
-ir_raw_get_encode_protocols(void)
-{
- u64 protocols;
-
- mutex_lock(&ir_raw_handler_lock);
- protocols = encode_protocols;
- mutex_unlock(&ir_raw_handler_lock);
- return protocols;
-}
-
static int change_protocol(struct rc_dev *dev, u64 *rc_type)
{
/* the caller will update dev->enabled_protocols */
return 0;
}
-/**
- * ir_raw_gen_manchester() - Encode data with Manchester (bi-phase) modulation.
- * @ev: Pointer to pointer to next free event. *@ev is incremented for
- * each raw event filled.
- * @max: Maximum number of raw events to fill.
- * @timings: Manchester modulation timings.
- * @n: Number of bits of data.
- * @data: Data bits to encode.
- *
- * Encodes the @n least significant bits of @data using Manchester (bi-phase)
- * modulation with the timing characteristics described by @timings, writing up
- * to @max raw IR events using the *@ev pointer.
- *
- * Returns: 0 on success.
- * -ENOBUFS if there isn't enough space in the array to fit the
- * full encoded data. In this case all @max events will have been
- * written.
- */
-int ir_raw_gen_manchester(struct ir_raw_event **ev, unsigned int max,
- const struct ir_raw_timings_manchester *timings,
- unsigned int n, unsigned int data)
-{
- bool need_pulse;
- unsigned int i;
- int ret = -ENOBUFS;
-
- i = 1 << (n - 1);
-
- if (timings->leader) {
- if (!max--)
- return ret;
- if (timings->pulse_space_start) {
- init_ir_raw_event_duration((*ev)++, 1, timings->leader);
-
- if (!max--)
- return ret;
- init_ir_raw_event_duration((*ev), 0, timings->leader);
- } else {
- init_ir_raw_event_duration((*ev), 1, timings->leader);
- }
- i >>= 1;
- } else {
- /* continue existing signal */
- --(*ev);
- }
- /* from here on *ev will point to the last event rather than the next */
-
- while (n && i > 0) {
- need_pulse = !(data & i);
- if (timings->invert)
- need_pulse = !need_pulse;
- if (need_pulse == !!(*ev)->pulse) {
- (*ev)->duration += timings->clock;
- } else {
- if (!max--)
- goto nobufs;
- init_ir_raw_event_duration(++(*ev), need_pulse,
- timings->clock);
- }
-
- if (!max--)
- goto nobufs;
- init_ir_raw_event_duration(++(*ev), !need_pulse,
- timings->clock);
- i >>= 1;
- }
-
- if (timings->trailer_space) {
- if (!(*ev)->pulse)
- (*ev)->duration += timings->trailer_space;
- else if (!max--)
- goto nobufs;
- else
- init_ir_raw_event_duration(++(*ev), 0,
- timings->trailer_space);
- }
-
- ret = 0;
-nobufs:
- /* point to the next event rather than last event before returning */
- ++(*ev);
- return ret;
-}
-EXPORT_SYMBOL(ir_raw_gen_manchester);
-
-/**
- * ir_raw_encode_scancode() - Encode a scancode as raw events
- *
- * @protocols: permitted protocols
- * @scancode: scancode filter describing a single scancode
- * @events: array of raw events to write into
- * @max: max number of raw events
- *
- * Attempts to encode the scancode as raw events.
- *
- * Returns: The number of events written.
- * -ENOBUFS if there isn't enough space in the array to fit the
- * encoding. In this case all @max events will have been written.
- * -EINVAL if the scancode is ambiguous or invalid, or if no
- * compatible encoder was found.
- */
-int ir_raw_encode_scancode(u64 protocols,
- const struct rc_scancode_filter *scancode,
- struct ir_raw_event *events, unsigned int max)
-{
- struct ir_raw_handler *handler;
- int ret = -EINVAL;
-
- mutex_lock(&ir_raw_handler_lock);
- list_for_each_entry(handler, &ir_raw_handler_list, list) {
- if (handler->protocols & protocols && handler->encode) {
- ret = handler->encode(protocols, scancode, events, max);
- if (ret >= 0 || ret == -ENOBUFS)
- break;
- }
- }
- mutex_unlock(&ir_raw_handler_lock);
-
- return ret;
-}
-EXPORT_SYMBOL(ir_raw_encode_scancode);
-
/*
* Used to (un)register raw event clients
*/
list_for_each_entry(raw, &ir_raw_client_list, list)
ir_raw_handler->raw_register(raw->dev);
available_protocols |= ir_raw_handler->protocols;
- if (ir_raw_handler->encode)
- encode_protocols |= ir_raw_handler->protocols;
mutex_unlock(&ir_raw_handler_lock);
return 0;
list_for_each_entry(raw, &ir_raw_client_list, list)
ir_raw_handler->raw_unregister(raw->dev);
available_protocols &= ~ir_raw_handler->protocols;
- if (ir_raw_handler->encode)
- encode_protocols &= ~ir_raw_handler->protocols;
mutex_unlock(&ir_raw_handler_lock);
}
EXPORT_SYMBOL(ir_raw_handler_unregister);
#include <linux/device.h>
#include <linux/module.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <media/rc-core.h>
#define DRIVER_NAME "rc-loopback"
return 0;
}
-static int loop_set_wakeup_filter(struct rc_dev *dev,
- struct rc_scancode_filter *sc_filter)
-{
- static const unsigned int max = 512;
- struct ir_raw_event *raw;
- int ret;
- int i;
-
- /* fine to disable filter */
- if (!sc_filter->mask)
- return 0;
-
- /* encode the specified filter and loop it back */
- raw = kmalloc_array(max, sizeof(*raw), GFP_KERNEL);
- ret = ir_raw_encode_scancode(dev->enabled_wakeup_protocols, sc_filter,
- raw, max);
- /* still loop back the partial raw IR even if it's incomplete */
- if (ret == -ENOBUFS)
- ret = max;
- if (ret >= 0) {
- /* do the loopback */
- for (i = 0; i < ret; ++i)
- ir_raw_event_store(dev, &raw[i]);
- ir_raw_event_handle(dev);
-
- ret = 0;
- }
-
- kfree(raw);
-
- return ret;
-}
-
static int __init loop_init(void)
{
struct rc_dev *rc;
rc->map_name = RC_MAP_EMPTY;
rc->priv = &loopdev;
rc->driver_type = RC_DRIVER_IR_RAW;
- rc->encode_wakeup = true;
rc->allowed_protocols = RC_BIT_ALL;
rc->timeout = 100 * 1000 * 1000; /* 100 ms */
rc->min_timeout = 1;
rc->s_idle = loop_set_idle;
rc->s_learning_mode = loop_set_learning_mode;
rc->s_carrier_report = loop_set_carrier_report;
- rc->s_wakeup_filter = loop_set_wakeup_filter;
loopdev.txmask = RXMASK_REGULAR;
loopdev.txcarrier = 36000;
} else {
enabled = dev->enabled_wakeup_protocols;
allowed = dev->allowed_wakeup_protocols;
- if (dev->encode_wakeup && !allowed)
- allowed = ir_raw_get_encode_protocols();
}
mutex_unlock(&dev->lock);
path ? path : "N/A");
kfree(path);
- if (dev->driver_type == RC_DRIVER_IR_RAW || dev->encode_wakeup) {
+ if (dev->driver_type == RC_DRIVER_IR_RAW) {
/* Load raw decoders, if they aren't already */
if (!raw_init) {
IR_dprintk(1, "Loading raw decoders\n");
ir_raw_init();
raw_init = true;
}
- }
-
- if (dev->driver_type == RC_DRIVER_IR_RAW) {
/* calls ir_register_device so unlock mutex here*/
mutex_unlock(&dev->lock);
rc = ir_raw_event_register(dev);
break;
case VB2_BUF_STATE_PREPARING:
case VB2_BUF_STATE_DEQUEUED:
+ case VB2_BUF_STATE_REQUEUEING:
/* nothing */
break;
}
if (WARN_ON(state != VB2_BUF_STATE_DONE &&
state != VB2_BUF_STATE_ERROR &&
- state != VB2_BUF_STATE_QUEUED))
+ state != VB2_BUF_STATE_QUEUED &&
+ state != VB2_BUF_STATE_REQUEUEING))
state = VB2_BUF_STATE_ERROR;
#ifdef CONFIG_VIDEO_ADV_DEBUG
for (plane = 0; plane < vb->num_planes; ++plane)
call_void_memop(vb, finish, vb->planes[plane].mem_priv);
- /* Add the buffer to the done buffers list */
spin_lock_irqsave(&q->done_lock, flags);
- vb->state = state;
- if (state != VB2_BUF_STATE_QUEUED)
+ if (state == VB2_BUF_STATE_QUEUED ||
+ state == VB2_BUF_STATE_REQUEUEING) {
+ vb->state = VB2_BUF_STATE_QUEUED;
+ } else {
+ /* Add the buffer to the done buffers list */
list_add_tail(&vb->done_entry, &q->done_list);
+ vb->state = state;
+ }
atomic_dec(&q->owned_by_drv_count);
spin_unlock_irqrestore(&q->done_lock, flags);
- if (state == VB2_BUF_STATE_QUEUED) {
+ switch (state) {
+ case VB2_BUF_STATE_QUEUED:
+ return;
+ case VB2_BUF_STATE_REQUEUEING:
if (q->start_streaming_called)
__enqueue_in_driver(vb);
return;
+ default:
+ /* Inform any processes that may be waiting for buffers */
+ wake_up(&q->done_wq);
+ break;
}
-
- /* Inform any processes that may be waiting for buffers */
- wake_up(&q->done_wq);
}
EXPORT_SYMBOL_GPL(vb2_buffer_done);
static void vb2_warn_zero_bytesused(struct vb2_buffer *vb)
{
- static bool __check_once __read_mostly;
+ static bool check_once;
- if (__check_once)
+ if (check_once)
return;
- __check_once = true;
- __WARN();
+ check_once = true;
+ WARN_ON(1);
- pr_warn_once("use of bytesused == 0 is deprecated and will be removed in the future,\n");
+ pr_warn("use of bytesused == 0 is deprecated and will be removed in the future,\n");
if (vb->vb2_queue->allow_zero_bytesused)
- pr_warn_once("use VIDIOC_DECODER_CMD(V4L2_DEC_CMD_STOP) instead.\n");
+ pr_warn("use VIDIOC_DECODER_CMD(V4L2_DEC_CMD_STOP) instead.\n");
else
- pr_warn_once("use the actual size instead.\n");
+ pr_warn("use the actual size instead.\n");
}
/**
{
int i;
+ if (!gpmc_base)
+ return;
+
gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE);
gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
{
int i;
+ if (!gpmc_base)
+ return;
+
gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig);
gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable);
gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl);
struct device *dev = &adapter->pdev->dev;
int status;
- if (lancer_chip(adapter) || BEx_chip(adapter))
+ if (lancer_chip(adapter) || BEx_chip(adapter) || be_is_mc(adapter))
return;
if (adapter->flags & BE_FLAGS_VXLAN_OFFLOADS) {
{
struct be_adapter *adapter = netdev_priv(netdev);
- if (lancer_chip(adapter) || BEx_chip(adapter))
+ if (lancer_chip(adapter) || BEx_chip(adapter) || be_is_mc(adapter))
return;
if (adapter->vxlan_port != port)
/* Start Rx/Tx DMA and enable the interrupts */
gfar_start(priv);
+ /* force link state update after mac reset */
+ priv->oldlink = 0;
+ priv->oldspeed = 0;
+ priv->oldduplex = -1;
+
phy_start(priv->phydev);
enable_napi(priv);
static inline bool fm10k_page_is_reserved(struct page *page)
{
- return (page_to_nid(page) != numa_mem_id()) || page->pfmemalloc;
+ return (page_to_nid(page) != numa_mem_id()) || page_is_pfmemalloc(page);
}
static bool fm10k_can_reuse_rx_page(struct fm10k_rx_buffer *rx_buffer,
static inline bool igb_page_is_reserved(struct page *page)
{
- return (page_to_nid(page) != numa_mem_id()) || page->pfmemalloc;
+ return (page_to_nid(page) != numa_mem_id()) || page_is_pfmemalloc(page);
}
static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer,
static inline bool ixgbe_page_is_reserved(struct page *page)
{
- return (page_to_nid(page) != numa_mem_id()) || page->pfmemalloc;
+ return (page_to_nid(page) != numa_mem_id()) || page_is_pfmemalloc(page);
}
/**
static inline bool ixgbevf_page_is_reserved(struct page *page)
{
- return (page_to_nid(page) != numa_mem_id()) || page->pfmemalloc;
+ return (page_to_nid(page) != numa_mem_id()) || page_is_pfmemalloc(page);
}
/**
sg_dma_address(&tx_ctl->sg) = dma_map_single(adapter->dev,
tx_ctl->buf, DMA_BUFFER_SIZE, DMA_TO_DEVICE);
- err = dma_mapping_error(adapter->dev,
- sg_dma_address(&tx_ctl->sg));
- if (err) {
+ if (dma_mapping_error(adapter->dev, sg_dma_address(&tx_ctl->sg))) {
+ err = -ENOMEM;
sg_dma_address(&tx_ctl->sg) = 0;
goto err;
}
bool needs_aneg = false, do_suspend = false;
enum phy_state old_state;
int err = 0;
+ int old_link;
mutex_lock(&phydev->lock);
phydev->adjust_link(phydev->attached_dev);
break;
case PHY_RUNNING:
- /* Only register a CHANGE if we are
- * polling or ignoring interrupts
+ /* Only register a CHANGE if we are polling or ignoring
+ * interrupts and link changed since latest checking.
*/
- if (!phy_interrupt_is_valid(phydev))
- phydev->state = PHY_CHANGELINK;
+ if (!phy_interrupt_is_valid(phydev)) {
+ old_link = phydev->link;
+ err = phy_read_status(phydev);
+ if (err)
+ break;
+
+ if (old_link != phydev->link)
+ phydev->state = PHY_CHANGELINK;
+ }
break;
case PHY_CHANGELINK:
err = phy_read_status(phydev);
}
/*
- * The LAN8710/LAN8720 requires a minimum of 2 link pulses within 64ms of each
- * other in order to set the ENERGYON bit and exit EDPD mode. If a link partner
- * does send the pulses within this interval, the PHY will remained powered
- * down.
- *
- * This workaround will manually toggle the PHY on/off upon calls to read_status
- * in order to generate link test pulses if the link is down. If a link partner
- * is present, it will respond to the pulses, which will cause the ENERGYON bit
- * to be set and will cause the EDPD mode to be exited.
+ * The LAN87xx suffers from rare absence of the ENERGYON-bit when Ethernet cable
+ * plugs in while LAN87xx is in Energy Detect Power-Down mode. This leads to
+ * unstable detection of plugging in Ethernet cable.
+ * This workaround disables Energy Detect Power-Down mode and waiting for
+ * response on link pulses to detect presence of plugged Ethernet cable.
+ * The Energy Detect Power-Down mode is enabled again in the end of procedure to
+ * save approximately 220 mW of power if cable is unplugged.
*/
static int lan87xx_read_status(struct phy_device *phydev)
{
int err = genphy_read_status(phydev);
+ int i;
if (!phydev->link) {
/* Disable EDPD to wake up PHY */
if (rc < 0)
return rc;
- /* Sleep 64 ms to allow ~5 link test pulses to be sent */
- msleep(64);
+ /* Wait max 640 ms to detect energy */
+ for (i = 0; i < 64; i++) {
+ /* Sleep to allow link test pulses to be sent */
+ msleep(10);
+ rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+ if (rc < 0)
+ return rc;
+ if (rc & MII_LAN83C185_ENERGYON)
+ break;
+ }
/* Re-enable EDPD */
rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
/* basic functions */
.config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
+ .read_status = lan87xx_read_status,
.config_init = smsc_phy_config_init,
.soft_reset = smsc_phy_reset,
static void ppp_ccp_closed(struct ppp *ppp);
static struct compressor *find_compressor(int type);
static void ppp_get_stats(struct ppp *ppp, struct ppp_stats *st);
-static struct ppp *ppp_create_interface(struct net *net, int unit, int *retp);
+static struct ppp *ppp_create_interface(struct net *net, int unit,
+ struct file *file, int *retp);
static void init_ppp_file(struct ppp_file *pf, int kind);
-static void ppp_shutdown_interface(struct ppp *ppp);
static void ppp_destroy_interface(struct ppp *ppp);
static struct ppp *ppp_find_unit(struct ppp_net *pn, int unit);
static struct channel *ppp_find_channel(struct ppp_net *pn, int unit);
file->private_data = NULL;
if (pf->kind == INTERFACE) {
ppp = PF_TO_PPP(pf);
+ rtnl_lock();
if (file == ppp->owner)
- ppp_shutdown_interface(ppp);
+ unregister_netdevice(ppp->dev);
+ rtnl_unlock();
}
if (atomic_dec_and_test(&pf->refcnt)) {
switch (pf->kind) {
mutex_lock(&ppp_mutex);
if (pf->kind == INTERFACE) {
ppp = PF_TO_PPP(pf);
+ rtnl_lock();
if (file == ppp->owner)
- ppp_shutdown_interface(ppp);
+ unregister_netdevice(ppp->dev);
+ rtnl_unlock();
}
if (atomic_long_read(&file->f_count) < 2) {
ppp_release(NULL, file);
/* Create a new ppp unit */
if (get_user(unit, p))
break;
- ppp = ppp_create_interface(net, unit, &err);
+ ppp = ppp_create_interface(net, unit, file, &err);
if (!ppp)
break;
file->private_data = &ppp->file;
- ppp->owner = file;
err = -EFAULT;
if (put_user(ppp->file.index, p))
break;
static __net_exit void ppp_exit_net(struct net *net)
{
struct ppp_net *pn = net_generic(net, ppp_net_id);
+ struct ppp *ppp;
+ LIST_HEAD(list);
+ int id;
+
+ rtnl_lock();
+ idr_for_each_entry(&pn->units_idr, ppp, id)
+ unregister_netdevice_queue(ppp->dev, &list);
+
+ unregister_netdevice_many(&list);
+ rtnl_unlock();
idr_destroy(&pn->units_idr);
}
return 0;
}
+static void ppp_dev_uninit(struct net_device *dev)
+{
+ struct ppp *ppp = netdev_priv(dev);
+ struct ppp_net *pn = ppp_pernet(ppp->ppp_net);
+
+ ppp_lock(ppp);
+ ppp->closing = 1;
+ ppp_unlock(ppp);
+
+ mutex_lock(&pn->all_ppp_mutex);
+ unit_put(&pn->units_idr, ppp->file.index);
+ mutex_unlock(&pn->all_ppp_mutex);
+
+ ppp->owner = NULL;
+
+ ppp->file.dead = 1;
+ wake_up_interruptible(&ppp->file.rwait);
+}
+
static const struct net_device_ops ppp_netdev_ops = {
.ndo_init = ppp_dev_init,
+ .ndo_uninit = ppp_dev_uninit,
.ndo_start_xmit = ppp_start_xmit,
.ndo_do_ioctl = ppp_net_ioctl,
.ndo_get_stats64 = ppp_get_stats64,
* or if there is already a unit with the requested number.
* unit == -1 means allocate a new number.
*/
-static struct ppp *
-ppp_create_interface(struct net *net, int unit, int *retp)
+static struct ppp *ppp_create_interface(struct net *net, int unit,
+ struct file *file, int *retp)
{
struct ppp *ppp;
struct ppp_net *pn;
ppp->mru = PPP_MRU;
init_ppp_file(&ppp->file, INTERFACE);
ppp->file.hdrlen = PPP_HDRLEN - 2; /* don't count proto bytes */
+ ppp->owner = file;
for (i = 0; i < NUM_NP; ++i)
ppp->npmode[i] = NPMODE_PASS;
INIT_LIST_HEAD(&ppp->channels);
init_waitqueue_head(&pf->rwait);
}
-/*
- * Take down a ppp interface unit - called when the owning file
- * (the one that created the unit) is closed or detached.
- */
-static void ppp_shutdown_interface(struct ppp *ppp)
-{
- struct ppp_net *pn;
-
- pn = ppp_pernet(ppp->ppp_net);
- mutex_lock(&pn->all_ppp_mutex);
-
- /* This will call dev_close() for us. */
- ppp_lock(ppp);
- if (!ppp->closing) {
- ppp->closing = 1;
- ppp_unlock(ppp);
- unregister_netdev(ppp->dev);
- unit_put(&pn->units_idr, ppp->file.index);
- } else
- ppp_unlock(ppp);
-
- ppp->file.dead = 1;
- ppp->owner = NULL;
- wake_up_interruptible(&ppp->file.rwait);
-
- mutex_unlock(&pn->all_ppp_mutex);
-}
-
/*
* Free the memory used by a ppp unit. This is only called once
* there are no channels connected to the unit and no file structs
{QMI_FIXED_INTF(0x413c, 0x81a4, 8)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
{QMI_FIXED_INTF(0x413c, 0x81a8, 8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
{QMI_FIXED_INTF(0x413c, 0x81a9, 8)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
+ {QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)}, /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
{QMI_FIXED_INTF(0x03f0, 0x581d, 4)}, /* HP lt4112 LTE/HSPA+ Gobi 4G Module (Huawei me906e) */
/* 4. Gobi 1000 devices */
# PCI configuration
#
config PCI_BUS_ADDR_T_64BIT
- def_bool y if (ARCH_DMA_ADDR_T_64BIT || 64BIT)
+ def_bool y if (ARCH_DMA_ADDR_T_64BIT || (64BIT && !PARISC))
depends on PCI
config PCI_MSI
else if (type == PCI_EXP_TYPE_UPSTREAM ||
type == PCI_EXP_TYPE_DOWNSTREAM) {
parent = pci_upstream_bridge(pdev);
- if (!parent->has_secondary_link)
+
+ /*
+ * Usually there's an upstream device (Root Port or Switch
+ * Downstream Port), but we can't assume one exists.
+ */
+ if (parent && !parent->has_secondary_link)
pdev->has_secondary_link = 1;
}
}
if (resp) {
resp(sp, fp, arg);
res = true;
- } else if (!IS_ERR(fp)) {
- fc_frame_free(fp);
}
spin_lock_bh(&ep->ex_lock);
* If new exch resp handler is valid then call that
* first.
*/
- fc_invoke_resp(ep, sp, fp);
+ if (!fc_invoke_resp(ep, sp, fp))
+ fc_frame_free(fp);
fc_exch_release(ep);
return;
fc_exch_hold(ep);
if (!rc)
fc_exch_delete(ep);
- fc_invoke_resp(ep, sp, fp);
+ if (!fc_invoke_resp(ep, sp, fp))
+ fc_frame_free(fp);
if (has_rec)
fc_exch_timer_set(ep, ep->r_a_tov);
fc_exch_release(ep);
fc_fcp_pkt_hold(fsp);
spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
- if (!fc_fcp_lock_pkt(fsp)) {
+ spin_lock_bh(&fsp->scsi_pkt_lock);
+ if (!(fsp->state & FC_SRB_COMPL)) {
+ fsp->state |= FC_SRB_COMPL;
+ /*
+ * TODO: dropping scsi_pkt_lock and then reacquiring
+ * again around fc_fcp_cleanup_cmd() is required,
+ * since fc_fcp_cleanup_cmd() calls into
+ * fc_seq_set_resp() and that func preempts cpu using
+ * schedule. May be schedule and related code should be
+ * removed instead of unlocking here to avoid scheduling
+ * while atomic bug.
+ */
+ spin_unlock_bh(&fsp->scsi_pkt_lock);
+
fc_fcp_cleanup_cmd(fsp, error);
+
+ spin_lock_bh(&fsp->scsi_pkt_lock);
fc_io_compl(fsp);
- fc_fcp_unlock_pkt(fsp);
}
+ spin_unlock_bh(&fsp->scsi_pkt_lock);
fc_fcp_pkt_release(fsp);
spin_lock_irqsave(&si->scsi_queue_lock, flags);
{
struct iscsi_conn *conn = cls_conn->dd_data;
struct iscsi_session *session = conn->session;
- unsigned long flags;
del_timer_sync(&conn->transport_timer);
+ mutex_lock(&session->eh_mutex);
spin_lock_bh(&session->frwd_lock);
conn->c_stage = ISCSI_CONN_CLEANUP_WAIT;
if (session->leadconn == conn) {
}
spin_unlock_bh(&session->frwd_lock);
- /*
- * Block until all in-progress commands for this connection
- * time out or fail.
- */
- for (;;) {
- spin_lock_irqsave(session->host->host_lock, flags);
- if (!atomic_read(&session->host->host_busy)) { /* OK for ERL == 0 */
- spin_unlock_irqrestore(session->host->host_lock, flags);
- break;
- }
- spin_unlock_irqrestore(session->host->host_lock, flags);
- msleep_interruptible(500);
- iscsi_conn_printk(KERN_INFO, conn, "iscsi conn_destroy(): "
- "host_busy %d host_failed %d\n",
- atomic_read(&session->host->host_busy),
- session->host->host_failed);
- /*
- * force eh_abort() to unblock
- */
- wake_up(&conn->ehwait);
- }
-
/* flush queued up work because we free the connection below */
iscsi_suspend_tx(conn);
if (session->leadconn == conn)
session->leadconn = NULL;
spin_unlock_bh(&session->frwd_lock);
+ mutex_unlock(&session->eh_mutex);
iscsi_destroy_conn(cls_conn);
}
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
-#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
}
}
EXPORT_SYMBOL(scsi_build_sense_buffer);
-
-/**
- * scsi_set_sense_information - set the information field in a
- * formatted sense data buffer
- * @buf: Where to build sense data
- * @info: 64-bit information value to be set
- *
- **/
-void scsi_set_sense_information(u8 *buf, u64 info)
-{
- if ((buf[0] & 0x7f) == 0x72) {
- u8 *ucp, len;
-
- len = buf[7];
- ucp = (char *)scsi_sense_desc_find(buf, len + 8, 0);
- if (!ucp) {
- buf[7] = len + 0xa;
- ucp = buf + 8 + len;
- }
- ucp[0] = 0;
- ucp[1] = 0xa;
- ucp[2] = 0x80; /* Valid bit */
- ucp[3] = 0;
- put_unaligned_be64(info, &ucp[4]);
- } else if ((buf[0] & 0x7f) == 0x70) {
- buf[0] |= 0x80;
- put_unaligned_be64(info, &buf[3]);
- }
-}
-EXPORT_SYMBOL(scsi_set_sense_information);
max_xfer = sdkp->max_xfer_blocks;
max_xfer <<= ilog2(sdp->sector_size) - 9;
- max_xfer = min_not_zero(queue_max_hw_sectors(sdkp->disk->queue),
- max_xfer);
- blk_queue_max_hw_sectors(sdkp->disk->queue, max_xfer);
+ sdkp->disk->queue->limits.max_sectors =
+ min_not_zero(queue_max_hw_sectors(sdkp->disk->queue), max_xfer);
+
set_capacity(disk, sdkp->capacity);
sd_config_write_same(sdkp);
kfree(buffer);
cmd->cmd_flags |= ICF_NON_IMMEDIATE_UNSOLICITED_DATA;
conn->sess->init_task_tag = cmd->init_task_tag = hdr->itt;
- if (hdr->flags & ISCSI_FLAG_CMD_READ) {
+ if (hdr->flags & ISCSI_FLAG_CMD_READ)
cmd->targ_xfer_tag = session_get_next_ttt(conn->sess);
- } else if (hdr->flags & ISCSI_FLAG_CMD_WRITE)
+ else
cmd->targ_xfer_tag = 0xFFFFFFFF;
cmd->cmd_sn = be32_to_cpu(hdr->cmdsn);
cmd->exp_stat_sn = be32_to_cpu(hdr->exp_statsn);
if (!strcmp(t->tf_ops->name, fo->name)) {
BUG_ON(atomic_read(&t->tf_access_cnt));
list_del(&t->tf_list);
+ mutex_unlock(&g_tf_lock);
+ /*
+ * Wait for any outstanding fabric se_deve_entry->rcu_head
+ * callbacks to complete post kfree_rcu(), before allowing
+ * fabric driver unload of TFO->module to proceed.
+ */
+ rcu_barrier();
kfree(t);
- break;
+ return;
}
}
mutex_unlock(&g_tf_lock);
list_for_each_entry(tb, &backend_list, list) {
if (tb->ops == ops) {
list_del(&tb->list);
+ mutex_unlock(&backend_mutex);
+ /*
+ * Wait for any outstanding backend driver ->rcu_head
+ * callbacks to complete post TBO->free_device() ->
+ * call_rcu(), before allowing backend driver module
+ * unload of target_backend_ops->owner to proceed.
+ */
+ rcu_barrier();
kfree(tb);
- break;
+ return;
}
}
mutex_unlock(&backend_mutex);
struct se_dev_entry *deve;
struct se_session *sess = cmd->se_sess;
struct se_node_acl *nacl;
+ struct scsi_lun slun;
unsigned char *buf;
u32 lun_count = 0, offset = 8;
-
- if (cmd->data_length < 16) {
- pr_warn("REPORT LUNS allocation length %u too small\n",
- cmd->data_length);
- return TCM_INVALID_CDB_FIELD;
- }
+ __be32 len;
buf = transport_kmap_data_sg(cmd);
- if (!buf)
+ if (cmd->data_length && !buf)
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
/*
* coming via a target_core_mod PASSTHROUGH op, and not through
* a $FABRIC_MOD. In that case, report LUN=0 only.
*/
- if (!sess) {
- int_to_scsilun(0, (struct scsi_lun *)&buf[offset]);
- lun_count = 1;
+ if (!sess)
goto done;
- }
+
nacl = sess->se_node_acl;
rcu_read_lock();
* See SPC2-R20 7.19.
*/
lun_count++;
- if ((offset + 8) > cmd->data_length)
+ if (offset >= cmd->data_length)
continue;
- int_to_scsilun(deve->mapped_lun, (struct scsi_lun *)&buf[offset]);
+ int_to_scsilun(deve->mapped_lun, &slun);
+ memcpy(buf + offset, &slun,
+ min(8u, cmd->data_length - offset));
offset += 8;
}
rcu_read_unlock();
* See SPC3 r07, page 159.
*/
done:
- lun_count *= 8;
- buf[0] = ((lun_count >> 24) & 0xff);
- buf[1] = ((lun_count >> 16) & 0xff);
- buf[2] = ((lun_count >> 8) & 0xff);
- buf[3] = (lun_count & 0xff);
- transport_kunmap_data_sg(cmd);
+ /*
+ * If no LUNs are accessible, report virtual LUN 0.
+ */
+ if (lun_count == 0) {
+ int_to_scsilun(0, &slun);
+ if (cmd->data_length > 8)
+ memcpy(buf + offset, &slun,
+ min(8u, cmd->data_length - offset));
+ lun_count = 1;
+ }
+
+ if (buf) {
+ len = cpu_to_be32(lun_count * 8);
+ memcpy(buf, &len, min_t(int, sizeof len, cmd->data_length));
+ transport_kunmap_data_sg(cmd);
+ }
target_complete_cmd_with_length(cmd, GOOD, 8 + lun_count * 8);
return 0;
* registered cooling device.
* @cpufreq_state: integer value representing the current state of cpufreq
* cooling devices.
- * @cpufreq_val: integer value representing the absolute value of the clipped
+ * @clipped_freq: integer value representing the absolute value of the clipped
* frequency.
* @max_level: maximum cooling level. One less than total number of valid
* cpufreq frequencies.
int id;
struct thermal_cooling_device *cool_dev;
unsigned int cpufreq_state;
- unsigned int cpufreq_val;
+ unsigned int clipped_freq;
unsigned int max_level;
unsigned int *freq_table; /* In descending order */
struct cpumask allowed_cpus;
static DEFINE_IDR(cpufreq_idr);
static DEFINE_MUTEX(cooling_cpufreq_lock);
+static unsigned int cpufreq_dev_count;
+
+static DEFINE_MUTEX(cooling_list_lock);
static LIST_HEAD(cpufreq_dev_list);
/**
{
struct cpufreq_cooling_device *cpufreq_dev;
- mutex_lock(&cooling_cpufreq_lock);
+ mutex_lock(&cooling_list_lock);
list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) {
- mutex_unlock(&cooling_cpufreq_lock);
+ mutex_unlock(&cooling_list_lock);
return get_level(cpufreq_dev, freq);
}
}
- mutex_unlock(&cooling_cpufreq_lock);
+ mutex_unlock(&cooling_list_lock);
pr_err("%s: cpu:%d not part of any cooling device\n", __func__, cpu);
return THERMAL_CSTATE_INVALID;
unsigned long event, void *data)
{
struct cpufreq_policy *policy = data;
- unsigned long max_freq = 0;
+ unsigned long clipped_freq;
struct cpufreq_cooling_device *cpufreq_dev;
- switch (event) {
+ if (event != CPUFREQ_ADJUST)
+ return NOTIFY_DONE;
- case CPUFREQ_ADJUST:
- mutex_lock(&cooling_cpufreq_lock);
- list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
- if (!cpumask_test_cpu(policy->cpu,
- &cpufreq_dev->allowed_cpus))
- continue;
+ mutex_lock(&cooling_list_lock);
+ list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
+ if (!cpumask_test_cpu(policy->cpu, &cpufreq_dev->allowed_cpus))
+ continue;
- max_freq = cpufreq_dev->cpufreq_val;
+ /*
+ * policy->max is the maximum allowed frequency defined by user
+ * and clipped_freq is the maximum that thermal constraints
+ * allow.
+ *
+ * If clipped_freq is lower than policy->max, then we need to
+ * readjust policy->max.
+ *
+ * But, if clipped_freq is greater than policy->max, we don't
+ * need to do anything.
+ */
+ clipped_freq = cpufreq_dev->clipped_freq;
- if (policy->max != max_freq)
- cpufreq_verify_within_limits(policy, 0,
- max_freq);
- }
- mutex_unlock(&cooling_cpufreq_lock);
+ if (policy->max > clipped_freq)
+ cpufreq_verify_within_limits(policy, 0, clipped_freq);
break;
- default:
- return NOTIFY_DONE;
}
+ mutex_unlock(&cooling_list_lock);
return NOTIFY_OK;
}
clip_freq = cpufreq_device->freq_table[state];
cpufreq_device->cpufreq_state = state;
- cpufreq_device->cpufreq_val = clip_freq;
+ cpufreq_device->clipped_freq = clip_freq;
cpufreq_update_policy(cpu);
pr_debug("%s: freq:%u KHz\n", __func__, freq);
}
- cpufreq_dev->cpufreq_val = cpufreq_dev->freq_table[0];
+ cpufreq_dev->clipped_freq = cpufreq_dev->freq_table[0];
cpufreq_dev->cool_dev = cool_dev;
mutex_lock(&cooling_cpufreq_lock);
+ mutex_lock(&cooling_list_lock);
+ list_add(&cpufreq_dev->node, &cpufreq_dev_list);
+ mutex_unlock(&cooling_list_lock);
+
/* Register the notifier for first cpufreq cooling device */
- if (list_empty(&cpufreq_dev_list))
+ if (!cpufreq_dev_count++)
cpufreq_register_notifier(&thermal_cpufreq_notifier_block,
CPUFREQ_POLICY_NOTIFIER);
- list_add(&cpufreq_dev->node, &cpufreq_dev_list);
-
mutex_unlock(&cooling_cpufreq_lock);
return cool_dev;
return;
cpufreq_dev = cdev->devdata;
- mutex_lock(&cooling_cpufreq_lock);
- list_del(&cpufreq_dev->node);
/* Unregister the notifier for the last cpufreq cooling device */
- if (list_empty(&cpufreq_dev_list))
+ mutex_lock(&cooling_cpufreq_lock);
+ if (!--cpufreq_dev_count)
cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block,
CPUFREQ_POLICY_NOTIFIER);
+
+ mutex_lock(&cooling_list_lock);
+ list_del(&cpufreq_dev->node);
+ mutex_unlock(&cooling_list_lock);
+
mutex_unlock(&cooling_cpufreq_lock);
thermal_cooling_device_unregister(cpufreq_dev->cool_dev);
max_allocatable_power, current_temp,
(s32)control_temp - (s32)current_temp);
- devm_kfree(&tz->device, req_power);
+ kfree(req_power);
unlock:
mutex_unlock(&tz->lock);
return -EINVAL;
}
- params = devm_kzalloc(&tz->device, sizeof(*params), GFP_KERNEL);
+ params = kzalloc(sizeof(*params), GFP_KERNEL);
if (!params)
return -ENOMEM;
return 0;
free:
- devm_kfree(&tz->device, params);
+ kfree(params);
return ret;
}
static void power_allocator_unbind(struct thermal_zone_device *tz)
{
dev_dbg(&tz->device, "Unbinding from thermal zone %d\n", tz->id);
- devm_kfree(&tz->device, tz->governor_data);
+ kfree(tz->governor_data);
tz->governor_data = NULL;
}
err = -EINVAL;
if (old) {
- struct fuse_dev *fud = fuse_get_dev(old);
+ struct fuse_dev *fud = NULL;
+
+ /*
+ * Check against file->f_op because CUSE
+ * uses the same ioctl handler.
+ */
+ if (old->f_op == file->f_op &&
+ old->f_cred->user_ns == file->f_cred->user_ns)
+ fud = fuse_get_dev(old);
if (fud) {
mutex_lock(&fuse_mutex);
uint8_t num_h_tile, num_v_tile;
uint8_t tile_h_loc, tile_v_loc;
uint16_t tile_h_size, tile_v_size;
-
- struct list_head destroy_list;
};
/**
return (eld[DRM_ELD_CEA_EDID_VER_MNL] & DRM_ELD_MNL_MASK) >> DRM_ELD_MNL_SHIFT;
}
+/**
+ * drm_eld_sad - Get ELD SAD structures.
+ * @eld: pointer to an eld memory structure with sad_count set
+ */
+static inline const uint8_t *drm_eld_sad(const uint8_t *eld)
+{
+ unsigned int ver, mnl;
+
+ ver = (eld[DRM_ELD_VER] & DRM_ELD_VER_MASK) >> DRM_ELD_VER_SHIFT;
+ if (ver != 2 && ver != 31)
+ return NULL;
+
+ mnl = drm_eld_mnl(eld);
+ if (mnl > 16)
+ return NULL;
+
+ return eld + DRM_ELD_CEA_SAD(mnl, 0);
+}
+
/**
* drm_eld_sad_count - Get ELD SAD count.
* @eld: pointer to an eld memory structure with sad_count set
SATA_SSP = 0x06, /* Software Settings Preservation */
SATA_DEVSLP = 0x09, /* Device Sleep */
- SETFEATURE_SENSE_DATA = 0xC3, /* Sense Data Reporting feature */
-
/* feature values for SET_MAX */
ATA_SET_MAX_ADDR = 0x00,
ATA_SET_MAX_PASSWD = 0x01,
#define ata_id_cdb_intr(id) (((id)[ATA_ID_CONFIG] & 0x60) == 0x20)
#define ata_id_has_da(id) ((id)[ATA_ID_SATA_CAPABILITY_2] & (1 << 4))
#define ata_id_has_devslp(id) ((id)[ATA_ID_FEATURE_SUPP] & (1 << 8))
-#define ata_id_has_ncq_autosense(id) \
- ((id)[ATA_ID_FEATURE_SUPP] & (1 << 7))
static inline bool ata_id_has_hipm(const u16 *id)
{
return false;
}
-static inline bool ata_id_has_sense_reporting(const u16 *id)
-{
- if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15)))
- return false;
- return id[ATA_ID_COMMAND_SET_3] & (1 << 6);
-}
-
-static inline bool ata_id_sense_reporting_enabled(const u16 *id)
-{
- if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15)))
- return false;
- return id[ATA_ID_COMMAND_SET_4] & (1 << 6);
-}
-
/**
* ata_id_major_version - get ATA level of drive
* @id: Identify data
extern int irq_chip_set_wake_parent(struct irq_data *data, unsigned int on);
extern int irq_chip_set_vcpu_affinity_parent(struct irq_data *data,
void *vcpu_info);
+extern int irq_chip_set_type_parent(struct irq_data *data, unsigned int type);
#endif
/* Handling of unhandled and spurious interrupts: */
return atomic_read(&(page)->_mapcount) >= 0;
}
+/*
+ * Return true only if the page has been allocated with
+ * ALLOC_NO_WATERMARKS and the low watermark was not
+ * met implying that the system is under some pressure.
+ */
+static inline bool page_is_pfmemalloc(struct page *page)
+{
+ /*
+ * Page index cannot be this large so this must be
+ * a pfmemalloc page.
+ */
+ return page->index == -1UL;
+}
+
+/*
+ * Only to be called by the page allocator on a freshly allocated
+ * page.
+ */
+static inline void set_page_pfmemalloc(struct page *page)
+{
+ page->index = -1UL;
+}
+
+static inline void clear_page_pfmemalloc(struct page *page)
+{
+ page->index = 0;
+}
+
/*
* Different kinds of faults, as returned by handle_mm_fault().
* Used to decide whether a process gets delivered SIGBUS or
union {
pgoff_t index; /* Our offset within mapping. */
void *freelist; /* sl[aou]b first free object */
- bool pfmemalloc; /* If set by the page allocator,
- * ALLOC_NO_WATERMARKS was set
- * and the low watermark was not
- * met implying that the system
- * is under some pressure. The
- * caller should try ensure
- * this page is only used to
- * free other pages.
- */
};
union {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
/*
- * Propagate page->pfmemalloc to the skb if we can. The problem is
- * that not all callers have unique ownership of the page. If
- * pfmemalloc is set, we check the mapping as a mapping implies
- * page->index is set (index and pfmemalloc share space).
- * If it's a valid mapping, we cannot use page->pfmemalloc but we
- * do not lose pfmemalloc information as the pages would not be
- * allocated using __GFP_MEMALLOC.
+ * Propagate page pfmemalloc to the skb if we can. The problem is
+ * that not all callers have unique ownership of the page but rely
+ * on page_is_pfmemalloc doing the right thing(tm).
*/
frag->page.p = page;
frag->page_offset = off;
skb_frag_size_set(frag, size);
page = compound_head(page);
- if (page->pfmemalloc && !page->mapping)
+ if (page_is_pfmemalloc(page))
skb->pfmemalloc = true;
}
static inline void skb_propagate_pfmemalloc(struct page *page,
struct sk_buff *skb)
{
- if (page && page->pfmemalloc)
+ if (page_is_pfmemalloc(page))
skb->pfmemalloc = true;
}
* @input_dev: the input child device used to communicate events to userspace
* @driver_type: specifies if protocol decoding is done in hardware or software
* @idle: used to keep track of RX state
- * @encode_wakeup: wakeup filtering uses IR encode API, therefore the allowed
- * wakeup protocols is the set of all raw encoders
* @allowed_protocols: bitmask with the supported RC_BIT_* protocols
* @enabled_protocols: bitmask with the enabled RC_BIT_* protocols
* @allowed_wakeup_protocols: bitmask with the supported RC_BIT_* wakeup protocols
struct input_dev *input_dev;
enum rc_driver_type driver_type;
bool idle;
- bool encode_wakeup;
u64 allowed_protocols;
u64 enabled_protocols;
u64 allowed_wakeup_protocols;
#define US_TO_NS(usec) ((usec) * 1000)
#define MS_TO_US(msec) ((msec) * 1000)
#define MS_TO_NS(msec) ((msec) * 1000 * 1000)
-#define NS_TO_US(nsec) DIV_ROUND_UP(nsec, 1000L)
void ir_raw_event_handle(struct rc_dev *dev);
int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev);
int ir_raw_event_store_with_filter(struct rc_dev *dev,
struct ir_raw_event *ev);
void ir_raw_event_set_idle(struct rc_dev *dev, bool idle);
-int ir_raw_encode_scancode(u64 protocols,
- const struct rc_scancode_filter *scancode,
- struct ir_raw_event *events, unsigned int max);
static inline void ir_raw_event_reset(struct rc_dev *dev)
{
* @VB2_BUF_STATE_PREPARING: buffer is being prepared in videobuf
* @VB2_BUF_STATE_PREPARED: buffer prepared in videobuf and by the driver
* @VB2_BUF_STATE_QUEUED: buffer queued in videobuf, but not in driver
+ * @VB2_BUF_STATE_REQUEUEING: re-queue a buffer to the driver
* @VB2_BUF_STATE_ACTIVE: buffer queued in driver and possibly used
* in a hardware operation
* @VB2_BUF_STATE_DONE: buffer returned from driver to videobuf, but
VB2_BUF_STATE_PREPARING,
VB2_BUF_STATE_PREPARED,
VB2_BUF_STATE_QUEUED,
+ VB2_BUF_STATE_REQUEUEING,
VB2_BUF_STATE_ACTIVE,
VB2_BUF_STATE_DONE,
VB2_BUF_STATE_ERROR,
u64 * info_out);
extern void scsi_build_sense_buffer(int desc, u8 *buf, u8 key, u8 asc, u8 ascq);
-extern void scsi_set_sense_information(u8 *buf, u64 info);
extern int scsi_ioctl_reset(struct scsi_device *, int __user *);
int io_ops_count;
};
+#ifdef CONFIG_SND_SOC_TOPOLOGY
+
/* gets a pointer to data from the firmware block header */
static inline const void *snd_soc_tplg_get_data(struct snd_soc_tplg_hdr *hdr)
{
const struct snd_soc_tplg_widget_events *events, int num_events,
u16 event_type);
+#else
+
+static inline int snd_soc_tplg_component_remove(struct snd_soc_component *comp,
+ u32 index)
+{
+ return 0;
+}
+
+#endif
+
#endif
#include <linux/types.h>
#include <sound/asound.h>
+#ifndef __KERNEL__
+#error This API is an early revision and not enabled in the current
+#error kernel release, it will be enabled in a future kernel version
+#error with incompatible changes to what is here.
+#endif
+
/*
* Maximum number of channels topology kcontrol can represent.
*/
spin_unlock_irq(&callback_lock);
/* use trialcs->mems_allowed as a temp variable */
- update_nodemasks_hier(cs, &cs->mems_allowed);
+ update_nodemasks_hier(cs, &trialcs->mems_allowed);
done:
return retval;
}
return -ENOSYS;
}
+/**
+ * irq_chip_set_type_parent - Set IRQ type on the parent interrupt
+ * @data: Pointer to interrupt specific data
+ * @type: IRQ_TYPE_{LEVEL,EDGE}_* value - see include/linux/irq.h
+ *
+ * Conditional, as the underlying parent chip might not implement it.
+ */
+int irq_chip_set_type_parent(struct irq_data *data, unsigned int type)
+{
+ data = data->parent_data;
+
+ if (data->chip->irq_set_type)
+ return data->chip->irq_set_type(data, type);
+
+ return -ENOSYS;
+}
+
/**
* irq_chip_retrigger_hierarchy - Retrigger an interrupt in hardware
* @data: Pointer to interrupt specific data
if (data->chip && data->chip->irq_retrigger)
return data->chip->irq_retrigger(data);
- return -ENOSYS;
+ return 0;
}
/**
spin_unlock(&base->lock);
base = new_base;
spin_lock(&base->lock);
- timer->flags &= ~TIMER_BASEMASK;
- timer->flags |= base->cpu;
+ WRITE_ONCE(timer->flags,
+ (timer->flags & ~TIMER_BASEMASK) | base->cpu);
}
}
set_page_owner(page, order, gfp_flags);
/*
- * page->pfmemalloc is set when ALLOC_NO_WATERMARKS was necessary to
+ * page is set pfmemalloc when ALLOC_NO_WATERMARKS was necessary to
* allocate the page. The expectation is that the caller is taking
* steps that will free more memory. The caller should avoid the page
* being used for !PFMEMALLOC purposes.
*/
- page->pfmemalloc = !!(alloc_flags & ALLOC_NO_WATERMARKS);
+ if (alloc_flags & ALLOC_NO_WATERMARKS)
+ set_page_pfmemalloc(page);
+ else
+ clear_page_pfmemalloc(page);
return 0;
}
atomic_add(size - 1, &page->_count);
/* reset page count bias and offset to start of new frag */
- nc->pfmemalloc = page->pfmemalloc;
+ nc->pfmemalloc = page_is_pfmemalloc(page);
nc->pagecnt_bias = size;
nc->offset = size;
}
}
/* Record if ALLOC_NO_WATERMARKS was set when allocating the slab */
- if (unlikely(page->pfmemalloc))
+ if (page_is_pfmemalloc(page))
pfmemalloc_active = true;
nr_pages = (1 << cachep->gfporder);
add_zone_page_state(page_zone(page),
NR_SLAB_UNRECLAIMABLE, nr_pages);
__SetPageSlab(page);
- if (page->pfmemalloc)
+ if (page_is_pfmemalloc(page))
SetPageSlabPfmemalloc(page);
if (kmemcheck_enabled && !(cachep->flags & SLAB_NOTRACK)) {
inc_slabs_node(s, page_to_nid(page), page->objects);
page->slab_cache = s;
__SetPageSlab(page);
- if (page->pfmemalloc)
+ if (page_is_pfmemalloc(page))
SetPageSlabPfmemalloc(page);
start = page_address(page);
/* increase the refcounter of the related vlan */
vlan = batadv_softif_vlan_get(bat_priv, vid);
if (WARN(!vlan, "adding TT local entry %pM to non-existent VLAN %d",
- addr, BATADV_PRINT_VID(vid)))
+ addr, BATADV_PRINT_VID(vid))) {
+ kfree(tt_local);
+ tt_local = NULL;
goto out;
+ }
batadv_dbg(BATADV_DBG_TT, bat_priv,
"Creating new local tt entry: %pM (vid: %d, ttvn: %d)\n",
break;
}
- if (skb_trimmed)
+ if (skb_trimmed && skb_trimmed != skb)
kfree_skb(skb_trimmed);
return err;
break;
}
- if (skb_trimmed)
+ if (skb_trimmed && skb_trimmed != skb)
kfree_skb(skb_trimmed);
return err;
if (skb && frag_size) {
skb->head_frag = 1;
- if (virt_to_head_page(data)->pfmemalloc)
+ if (page_is_pfmemalloc(virt_to_head_page(data)))
skb->pfmemalloc = 1;
}
return skb;
* Otherwise returns the provided skb. Returns NULL in error cases
* (e.g. transport_len exceeds skb length or out-of-memory).
*
- * Caller needs to set the skb transport header and release the returned skb.
- * Provided skb is consumed.
+ * Caller needs to set the skb transport header and free any returned skb if it
+ * differs from the provided skb.
*/
static struct sk_buff *skb_checksum_maybe_trim(struct sk_buff *skb,
unsigned int transport_len)
unsigned int len = skb_transport_offset(skb) + transport_len;
int ret;
- if (skb->len < len) {
- kfree_skb(skb);
+ if (skb->len < len)
return NULL;
- } else if (skb->len == len) {
+ else if (skb->len == len)
return skb;
- }
skb_chk = skb_clone(skb, GFP_ATOMIC);
- kfree_skb(skb);
-
if (!skb_chk)
return NULL;
* If the skb has data beyond the given transport length, then a
* trimmed & cloned skb is checked and returned.
*
- * Caller needs to set the skb transport header and release the returned skb.
- * Provided skb is consumed.
+ * Caller needs to set the skb transport header and free any returned skb if it
+ * differs from the provided skb.
*/
struct sk_buff *skb_checksum_trimmed(struct sk_buff *skb,
unsigned int transport_len,
skb_chk = skb_checksum_maybe_trim(skb, transport_len);
if (!skb_chk)
- return NULL;
+ goto err;
- if (!pskb_may_pull(skb_chk, offset)) {
- kfree_skb(skb_chk);
- return NULL;
- }
+ if (!pskb_may_pull(skb_chk, offset))
+ goto err;
__skb_pull(skb_chk, offset);
ret = skb_chkf(skb_chk);
__skb_push(skb_chk, offset);
- if (ret) {
- kfree_skb(skb_chk);
- return NULL;
- }
+ if (ret)
+ goto err;
return skb_chk;
+
+err:
+ if (skb_chk && skb_chk != skb)
+ kfree_skb(skb_chk);
+
+ return NULL;
+
}
EXPORT_SYMBOL(skb_checksum_trimmed);
key = l->key + 1;
iter->pos++;
- if (pos-- <= 0)
+ if (--pos <= 0)
break;
l = NULL;
struct sk_buff *skb_chk;
unsigned int transport_len;
unsigned int len = skb_transport_offset(skb) + sizeof(struct igmphdr);
- int ret;
+ int ret = -EINVAL;
transport_len = ntohs(ip_hdr(skb)->tot_len) - ip_hdrlen(skb);
- skb_get(skb);
skb_chk = skb_checksum_trimmed(skb, transport_len,
ip_mc_validate_checksum);
if (!skb_chk)
- return -EINVAL;
+ goto err;
- if (!pskb_may_pull(skb_chk, len)) {
- kfree_skb(skb_chk);
- return -EINVAL;
- }
+ if (!pskb_may_pull(skb_chk, len))
+ goto err;
ret = ip_mc_check_igmp_msg(skb_chk);
- if (ret) {
- kfree_skb(skb_chk);
- return ret;
- }
+ if (ret)
+ goto err;
if (skb_trimmed)
*skb_trimmed = skb_chk;
- else
+ /* free now unneeded clone */
+ else if (skb_chk != skb)
kfree_skb(skb_chk);
- return 0;
+ ret = 0;
+
+err:
+ if (ret && skb_chk && skb_chk != skb)
+ kfree_skb(skb_chk);
+
+ return ret;
}
/**
* @skb_trimmed: to store an skb pointer trimmed to IPv4 packet tail (optional)
*
* Checks whether an IPv4 packet is a valid IGMP packet. If so sets
- * skb network and transport headers accordingly and returns zero.
+ * skb transport header accordingly and returns zero.
*
* -EINVAL: A broken packet was detected, i.e. it violates some internet
* standard
* to leave the original skb and its full frame unchanged (which might be
* desirable for layer 2 frame jugglers).
*
- * The caller needs to release a reference count from any returned skb_trimmed.
+ * Caller needs to set the skb network header and free any returned skb if it
+ * differs from the provided skb.
*/
int ip_mc_check_igmp(struct sk_buff *skb, struct sk_buff **skb_trimmed)
{
}
spin_unlock(&queue->syn_wait_lock);
- if (del_timer_sync(&req->rsk_timer))
+ if (timer_pending(&req->rsk_timer) && del_timer_sync(&req->rsk_timer))
reqsk_put(req);
return found;
}
static int tcp_syn_retries_max = MAX_TCP_SYNCNT;
static int ip_ping_group_range_min[] = { 0, 0 };
static int ip_ping_group_range_max[] = { GID_T_MAX, GID_T_MAX };
-static int min_sndbuf = SOCK_MIN_SNDBUF;
-static int min_rcvbuf = SOCK_MIN_RCVBUF;
/* Update system visible IP port range */
static void set_local_port_range(struct net *net, int range[2])
.maxlen = sizeof(sysctl_tcp_wmem),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
- .extra1 = &min_sndbuf,
+ .extra1 = &one,
},
{
.procname = "tcp_notsent_lowat",
.maxlen = sizeof(sysctl_tcp_rmem),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
- .extra1 = &min_rcvbuf,
+ .extra1 = &one,
},
{
.procname = "tcp_app_win",
.maxlen = sizeof(sysctl_udp_rmem_min),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
- .extra1 = &min_rcvbuf,
+ .extra1 = &one
},
{
.procname = "udp_wmem_min",
.maxlen = sizeof(sysctl_udp_wmem_min),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
- .extra1 = &min_sndbuf,
+ .extra1 = &one
},
{ }
};
*ppcpu_rt = NULL;
}
}
+
+ non_pcpu_rt->rt6i_pcpu = NULL;
}
static void rt6_release(struct rt6_info *rt)
struct sk_buff *skb_chk = NULL;
unsigned int transport_len;
unsigned int len = skb_transport_offset(skb) + sizeof(struct mld_msg);
- int ret;
+ int ret = -EINVAL;
transport_len = ntohs(ipv6_hdr(skb)->payload_len);
transport_len -= skb_transport_offset(skb) - sizeof(struct ipv6hdr);
- skb_get(skb);
skb_chk = skb_checksum_trimmed(skb, transport_len,
ipv6_mc_validate_checksum);
if (!skb_chk)
- return -EINVAL;
+ goto err;
- if (!pskb_may_pull(skb_chk, len)) {
- kfree_skb(skb_chk);
- return -EINVAL;
- }
+ if (!pskb_may_pull(skb_chk, len))
+ goto err;
ret = ipv6_mc_check_mld_msg(skb_chk);
- if (ret) {
- kfree_skb(skb_chk);
- return ret;
- }
+ if (ret)
+ goto err;
if (skb_trimmed)
*skb_trimmed = skb_chk;
- else
+ /* free now unneeded clone */
+ else if (skb_chk != skb)
kfree_skb(skb_chk);
- return 0;
+ ret = 0;
+
+err:
+ if (ret && skb_chk && skb_chk != skb)
+ kfree_skb(skb_chk);
+
+ return ret;
}
/**
* @skb_trimmed: to store an skb pointer trimmed to IPv6 packet tail (optional)
*
* Checks whether an IPv6 packet is a valid MLD packet. If so sets
- * skb network and transport headers accordingly and returns zero.
+ * skb transport header accordingly and returns zero.
*
* -EINVAL: A broken packet was detected, i.e. it violates some internet
* standard
* to leave the original skb and its full frame unchanged (which might be
* desirable for layer 2 frame jugglers).
*
- * The caller needs to release a reference count from any returned skb_trimmed.
+ * Caller needs to set the skb network header and free any returned skb if it
+ * differs from the provided skb.
*/
int ipv6_mc_check_mld(struct sk_buff *skb, struct sk_buff **skb_trimmed)
{
/* allocate dst with ip6_dst_ops */
static struct rt6_info *__ip6_dst_alloc(struct net *net,
struct net_device *dev,
- int flags,
- struct fib6_table *table)
+ int flags)
{
struct rt6_info *rt = dst_alloc(&net->ipv6.ip6_dst_ops, dev,
0, DST_OBSOLETE_FORCE_CHK, flags);
static struct rt6_info *ip6_dst_alloc(struct net *net,
struct net_device *dev,
- int flags,
- struct fib6_table *table)
+ int flags)
{
- struct rt6_info *rt = __ip6_dst_alloc(net, dev, flags, table);
+ struct rt6_info *rt = __ip6_dst_alloc(net, dev, flags);
if (rt) {
rt->rt6i_pcpu = alloc_percpu_gfp(struct rt6_info *, GFP_ATOMIC);
if (ort->rt6i_flags & (RTF_CACHE | RTF_PCPU))
ort = (struct rt6_info *)ort->dst.from;
- rt = __ip6_dst_alloc(dev_net(ort->dst.dev), ort->dst.dev,
- 0, ort->rt6i_table);
+ rt = __ip6_dst_alloc(dev_net(ort->dst.dev), ort->dst.dev, 0);
if (!rt)
return NULL;
struct rt6_info *pcpu_rt;
pcpu_rt = __ip6_dst_alloc(dev_net(rt->dst.dev),
- rt->dst.dev, rt->dst.flags,
- rt->rt6i_table);
+ rt->dst.dev, rt->dst.flags);
if (!pcpu_rt)
return NULL;
/* It should be called with read_lock_bh(&tb6_lock) acquired */
static struct rt6_info *rt6_get_pcpu_route(struct rt6_info *rt)
{
- struct rt6_info *pcpu_rt, *prev, **p;
+ struct rt6_info *pcpu_rt, **p;
p = this_cpu_ptr(rt->rt6i_pcpu);
pcpu_rt = *p;
- if (pcpu_rt)
- goto done;
+ if (pcpu_rt) {
+ dst_hold(&pcpu_rt->dst);
+ rt6_dst_from_metrics_check(pcpu_rt);
+ }
+ return pcpu_rt;
+}
+
+static struct rt6_info *rt6_make_pcpu_route(struct rt6_info *rt)
+{
+ struct fib6_table *table = rt->rt6i_table;
+ struct rt6_info *pcpu_rt, *prev, **p;
pcpu_rt = ip6_rt_pcpu_alloc(rt);
if (!pcpu_rt) {
struct net *net = dev_net(rt->dst.dev);
- pcpu_rt = net->ipv6.ip6_null_entry;
- goto done;
+ dst_hold(&net->ipv6.ip6_null_entry->dst);
+ return net->ipv6.ip6_null_entry;
}
- prev = cmpxchg(p, NULL, pcpu_rt);
- if (prev) {
- /* If someone did it before us, return prev instead */
+ read_lock_bh(&table->tb6_lock);
+ if (rt->rt6i_pcpu) {
+ p = this_cpu_ptr(rt->rt6i_pcpu);
+ prev = cmpxchg(p, NULL, pcpu_rt);
+ if (prev) {
+ /* If someone did it before us, return prev instead */
+ dst_destroy(&pcpu_rt->dst);
+ pcpu_rt = prev;
+ }
+ } else {
+ /* rt has been removed from the fib6 tree
+ * before we have a chance to acquire the read_lock.
+ * In this case, don't brother to create a pcpu rt
+ * since rt is going away anyway. The next
+ * dst_check() will trigger a re-lookup.
+ */
dst_destroy(&pcpu_rt->dst);
- pcpu_rt = prev;
+ pcpu_rt = rt;
}
-
-done:
dst_hold(&pcpu_rt->dst);
rt6_dst_from_metrics_check(pcpu_rt);
+ read_unlock_bh(&table->tb6_lock);
return pcpu_rt;
}
rt->dst.lastuse = jiffies;
rt->dst.__use++;
pcpu_rt = rt6_get_pcpu_route(rt);
- read_unlock_bh(&table->tb6_lock);
+
+ if (pcpu_rt) {
+ read_unlock_bh(&table->tb6_lock);
+ } else {
+ /* We have to do the read_unlock first
+ * because rt6_make_pcpu_route() may trigger
+ * ip6_dst_gc() which will take the write_lock.
+ */
+ dst_hold(&rt->dst);
+ read_unlock_bh(&table->tb6_lock);
+ pcpu_rt = rt6_make_pcpu_route(rt);
+ dst_release(&rt->dst);
+ }
return pcpu_rt;
+
}
}
if (unlikely(!idev))
return ERR_PTR(-ENODEV);
- rt = ip6_dst_alloc(net, dev, 0, NULL);
+ rt = ip6_dst_alloc(net, dev, 0);
if (unlikely(!rt)) {
in6_dev_put(idev);
dst = ERR_PTR(-ENOMEM);
if (!table)
goto out;
- rt = ip6_dst_alloc(net, NULL, (cfg->fc_flags & RTF_ADDRCONF) ? 0 : DST_NOCOUNT, table);
+ rt = ip6_dst_alloc(net, NULL,
+ (cfg->fc_flags & RTF_ADDRCONF) ? 0 : DST_NOCOUNT);
if (!rt) {
err = -ENOMEM;
{
struct net *net = dev_net(idev->dev);
struct rt6_info *rt = ip6_dst_alloc(net, net->loopback_dev,
- DST_NOCOUNT, NULL);
+ DST_NOCOUNT);
if (!rt)
return ERR_PTR(-ENOMEM);
static inline void
minstrel_sort_best_tp_rates(struct minstrel_sta_info *mi, int i, u8 *tp_list)
{
- int j = MAX_THR_RATES;
- struct minstrel_rate_stats *tmp_mrs = &mi->r[j - 1].stats;
+ int j;
+ struct minstrel_rate_stats *tmp_mrs;
struct minstrel_rate_stats *cur_mrs = &mi->r[i].stats;
- while (j > 0 && (minstrel_get_tp_avg(&mi->r[i], cur_mrs->prob_ewma) >
- minstrel_get_tp_avg(&mi->r[tp_list[j - 1]], tmp_mrs->prob_ewma))) {
- j--;
+ for (j = MAX_THR_RATES; j > 0; --j) {
tmp_mrs = &mi->r[tp_list[j - 1]].stats;
+ if (minstrel_get_tp_avg(&mi->r[i], cur_mrs->prob_ewma) <=
+ minstrel_get_tp_avg(&mi->r[tp_list[j - 1]], tmp_mrs->prob_ewma))
+ break;
}
if (j < MAX_THR_RATES - 1)
SND_PCI_QUIRK(0x1028, 0x06d9, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x06da, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x06de, "Dell", ALC292_FIXUP_DISABLE_AAMIX),
+ SND_PCI_QUIRK(0x1028, 0x06db, "Dell", ALC292_FIXUP_DISABLE_AAMIX),
SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2),
SND_PCI_QUIRK(0x17aa, 0x220c, "Thinkpad T440s", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x220e, "Thinkpad T440p", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2210, "Thinkpad T540p", ALC292_FIXUP_TPT440_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x2211, "Thinkpad W541", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2212, "Thinkpad T440", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2214, "Thinkpad X240", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2215, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
bool
select SND_DMAENGINE_PCM
+config SND_SOC_TOPOLOGY
+ bool
+
# All the supported SoCs
source "sound/soc/adi/Kconfig"
source "sound/soc/atmel/Kconfig"
snd-soc-core-objs := soc-core.o soc-dapm.o soc-jack.o soc-cache.o soc-utils.o
snd-soc-core-objs += soc-pcm.o soc-compress.o soc-io.o soc-devres.o soc-ops.o
+
+ifneq ($(CONFIG_SND_SOC_TOPOLOGY),)
snd-soc-core-objs += soc-topology.o
+endif
ifneq ($(CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM),)
snd-soc-core-objs += soc-generic-dmaengine-pcm.o
int err = -ENODEV;
down_read(&chip->shutdown_rwsem);
- if (chip->probing && chip->in_pm)
+ if (chip->probing || chip->in_pm)
err = 0;
else if (!chip->shutdown)
err = usb_autopm_get_interface(chip->pm_intf);
goto out_child;
}
+ /*
+ * Normally perf_session__new would do this, but it doesn't have the
+ * evlist.
+ */
+ if (rec->tool.ordered_events && !perf_evlist__sample_id_all(rec->evlist)) {
+ pr_warning("WARNING: No sample_id_all support, falling back to unordered processing\n");
+ rec->tool.ordered_events = false;
+ }
+
if (!rec->evlist->nr_groups)
perf_header__clear_feat(&session->header, HEADER_GROUP_DESC);
.tool = {
.sample = process_sample_event,
.fork = perf_event__process_fork,
+ .exit = perf_event__process_exit,
.comm = perf_event__process_comm,
.mmap = perf_event__process_mmap,
.mmap2 = perf_event__process_mmap2,
+ .ordered_events = true,
},
};
static void display_setup_sig(void)
{
- signal(SIGSEGV, display_sig);
- signal(SIGFPE, display_sig);
+ signal(SIGSEGV, sighandler_dump_stack);
+ signal(SIGFPE, sighandler_dump_stack);
signal(SIGINT, display_sig);
signal(SIGQUIT, display_sig);
signal(SIGTERM, display_sig);
event->fork.ptid);
int err = 0;
+ if (dump_trace)
+ perf_event__fprintf_task(event, stdout);
+
+ /*
+ * There may be an existing thread that is not actually the parent,
+ * either because we are processing events out of order, or because the
+ * (fork) event that would have removed the thread was lost. Assume the
+ * latter case and continue on as best we can.
+ */
+ if (parent->pid_ != (pid_t)event->fork.ppid) {
+ dump_printf("removing erroneous parent thread %d/%d\n",
+ parent->pid_, parent->tid);
+ machine__remove_thread(machine, parent);
+ thread__put(parent);
+ parent = machine__findnew_thread(machine, event->fork.ppid,
+ event->fork.ptid);
+ }
+
/* if a thread currently exists for the thread id remove it */
if (thread != NULL) {
machine__remove_thread(machine, thread);
thread = machine__findnew_thread(machine, event->fork.pid,
event->fork.tid);
- if (dump_trace)
- perf_event__fprintf_task(event, stdout);
if (thread == NULL || parent == NULL ||
thread__fork(thread, parent, sample->time) < 0) {
if (thread->pid_ == parent->pid_)
return 0;
+ if (thread->mg == parent->mg) {
+ pr_debug("broken map groups on thread %d/%d parent %d/%d\n",
+ thread->pid_, thread->tid, parent->pid_, parent->tid);
+ return 0;
+ }
+
/* But this one is new process, copy maps. */
for (i = 0; i < MAP__NR_TYPES; ++i)
if (map_groups__clone(thread->mg, parent->mg, i) < 0)