atl1c_main.c: add wait_for_idle routine
authorJoe Perches <joe@perches.com>
Sun, 31 May 2009 20:44:54 +0000 (20:44 +0000)
committerDavid S. Miller <davem@davemloft.net>
Mon, 1 Jun 2009 10:13:12 +0000 (03:13 -0700)
Slight refactoring of duplicated wait for idle checks
Spelling fix

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: jie.yang@atheros.com
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/atl1c/atl1c_main.c

index ac76136d70f9e965962805ce1c72c26582d174a0..cd547a205fb96d9d9a71f37cfbc57286686f31d2 100644 (file)
@@ -163,6 +163,24 @@ static inline void atl1c_irq_reset(struct atl1c_adapter *adapter)
        atl1c_irq_enable(adapter);
 }
 
+/*
+ * atl1c_wait_until_idle - wait up to AT_HW_MAX_IDLE_DELAY reads
+ * of the idle status register until the device is actually idle
+ */
+static u32 atl1c_wait_until_idle(struct atl1c_hw *hw)
+{
+       int timeout;
+       u32 data;
+
+       for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
+               AT_READ_REG(hw, REG_IDLE_STATUS, &data);
+               if ((data & IDLE_STATUS_MASK) == 0)
+                       return 0;
+               msleep(1);
+       }
+       return data;
+}
+
 /*
  * atl1c_phy_config - Timer Call-back
  * @data: pointer to netdev cast into an unsigned long
@@ -1106,7 +1124,6 @@ static void atl1c_configure_dma(struct atl1c_adapter *adapter)
 static int atl1c_stop_mac(struct atl1c_hw *hw)
 {
        u32 data;
-       int timeout;
 
        AT_READ_REG(hw, REG_RXQ_CTRL, &data);
        data &= ~(RXQ1_CTRL_EN | RXQ2_CTRL_EN |
@@ -1117,25 +1134,13 @@ static int atl1c_stop_mac(struct atl1c_hw *hw)
        data &= ~TXQ_CTRL_EN;
        AT_WRITE_REG(hw, REG_TWSI_CTRL, data);
 
-       for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
-               AT_READ_REG(hw, REG_IDLE_STATUS, &data);
-               if ((data & (IDLE_STATUS_RXQ_NO_IDLE |
-                       IDLE_STATUS_TXQ_NO_IDLE)) == 0)
-                       break;
-               msleep(1);
-       }
+       atl1c_wait_until_idle(hw);
 
        AT_READ_REG(hw, REG_MAC_CTRL, &data);
        data &= ~(MAC_CTRL_TX_EN | MAC_CTRL_RX_EN);
        AT_WRITE_REG(hw, REG_MAC_CTRL, data);
 
-       for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
-               AT_READ_REG(hw, REG_IDLE_STATUS, &data);
-               if ((data & IDLE_STATUS_MASK) == 0)
-                       return 0;
-               msleep(1);
-       }
-       return data;
+       return (int)atl1c_wait_until_idle(hw);
 }
 
 static void atl1c_enable_rx_ctrl(struct atl1c_hw *hw)
@@ -1178,8 +1183,6 @@ static int atl1c_reset_mac(struct atl1c_hw *hw)
 {
        struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter;
        struct pci_dev *pdev = adapter->pdev;
-       u32 idle_status_data = 0;
-       int timeout = 0;
        int ret;
 
        AT_WRITE_REG(hw, REG_IMR, 0);
@@ -1198,15 +1201,10 @@ static int atl1c_reset_mac(struct atl1c_hw *hw)
        AT_WRITE_FLUSH(hw);
        msleep(10);
        /* Wait at least 10ms for All module to be Idle */
-       for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
-               AT_READ_REG(hw, REG_IDLE_STATUS, &idle_status_data);
-               if ((idle_status_data & IDLE_STATUS_MASK) == 0)
-                       break;
-               msleep(1);
-       }
-       if (timeout >= AT_HW_MAX_IDLE_DELAY) {
+
+       if (atl1c_wait_until_idle(hw)) {
                dev_err(&pdev->dev,
-                       "MAC state machine cann't be idle since"
+                       "MAC state machine can't be idle since"
                        " disabled for 10ms second\n");
                return -1;
        }