usb: gadget: s3c-hsotg: stall ep0 in set_halt function
authorRobert Baldyga <r.baldyga@samsung.com>
Tue, 14 Jan 2014 07:36:00 +0000 (08:36 +0100)
committerFelipe Balbi <balbi@ti.com>
Tue, 18 Feb 2014 16:52:54 +0000 (10:52 -0600)
When s3c_hsotg_ep_sethalt() function is called for ep0 it should be stalled
in the same way that it is in s3c_hsotg_process_control() function, because
SET_HALT for ep0 is delayed response for setup request. Endpoint 0, if
halted, it doesn't need CLEAR_HALT because it clears "stalled" state
automatically when next setup request is received.

For this reason this patch moves code setting ep0 to "stalled" state to new
function named s3c_hsotg_stall_ep0() which is called in
s3c_hsotg_process_control() function as an immediate response for setup
request, and in s3c_hsotg_ep_sethalt() function as a delayed response for
setup request.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
drivers/usb/gadget/s3c-hsotg.c

index 930c490dd83b5e4d391687e36a739bf074bcaa76..99c8e3ca6a3ccddc3ddecba03edaf69f148ffc56 100644 (file)
@@ -1185,6 +1185,41 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
 static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
 static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg);
 
+/**
+ * s3c_hsotg_stall_ep0 - stall ep0
+ * @hsotg: The device state
+ *
+ * Set stall for ep0 as response for setup request.
+ */
+static void s3c_hsotg_stall_ep0(struct s3c_hsotg *hsotg) {
+       struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
+       u32 reg;
+       u32 ctrl;
+
+       dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in);
+       reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0;
+
+       /*
+        * DxEPCTL_Stall will be cleared by EP once it has
+        * taken effect, so no need to clear later.
+        */
+
+       ctrl = readl(hsotg->regs + reg);
+       ctrl |= DxEPCTL_Stall;
+       ctrl |= DxEPCTL_CNAK;
+       writel(ctrl, hsotg->regs + reg);
+
+       dev_dbg(hsotg->dev,
+               "written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
+               ctrl, reg, readl(hsotg->regs + reg));
+
+        /*
+         * complete won't be called, so we enqueue
+         * setup request here
+         */
+        s3c_hsotg_enqueue_setup(hsotg);
+}
+
 /**
  * s3c_hsotg_process_control - process a control request
  * @hsotg: The device state
@@ -1262,38 +1297,8 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
         * so respond with a STALL for the status stage to indicate failure.
         */
 
-       if (ret < 0) {
-               u32 reg;
-               u32 ctrl;
-
-               dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in);
-               reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0;
-
-               /*
-                * DxEPCTL_Stall will be cleared by EP once it has
-                * taken effect, so no need to clear later.
-                */
-
-               ctrl = readl(hsotg->regs + reg);
-               ctrl |= DxEPCTL_Stall;
-               ctrl |= DxEPCTL_CNAK;
-               writel(ctrl, hsotg->regs + reg);
-
-               dev_dbg(hsotg->dev,
-                       "written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
-                       ctrl, reg, readl(hsotg->regs + reg));
-
-               /*
-                * don't believe we need to anything more to get the EP
-                * to reply with a STALL packet
-                */
-
-                /*
-                 * complete won't be called, so we enqueue
-                 * setup request here
-                 */
-                s3c_hsotg_enqueue_setup(hsotg);
-       }
+       if (ret < 0)
+               s3c_hsotg_stall_ep0(hsotg);
 }
 
 /**
@@ -2832,6 +2837,15 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
 
        dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value);
 
+       if (index == 0) {
+               if (value)
+                       s3c_hsotg_stall_ep0(hs);
+               else
+                       dev_warn(hs->dev,
+                                "%s: can't clear halt on ep0\n", __func__);
+               return 0;
+       }
+
        /* write both IN and OUT control registers */
 
        epreg = DIEPCTL(index);