mmc: omap_hsmmc: Enable HSPE bit for high speed cards
authorHebbar, Gururaja <gururaja.hebbar@ti.com>
Mon, 19 Nov 2012 16:29:58 +0000 (21:59 +0530)
committerChris Ball <cjb@laptop.org>
Thu, 6 Dec 2012 18:54:56 +0000 (13:54 -0500)
HSMMC IP on AM33xx need a special setting to handle High-speed cards.
Other platforms like TI81xx, OMAP4 may need this as-well. This depends
on the HSMMC IP timing closure done for the high speed cards.

From AM335x TRM (SPRUH73F - 18.3.12 Output Signals Generation):

The MMC/SD/SDIO output signals can be driven on either falling edge or
rising edge depending on the SD_HCTL[2] HSPE bit. This feature allows
to reach better timing performance, and thus to increase data transfer
frequency.

There are few pre-requisites for enabling the HSPE bit
- Controller should support High-Speed-Enable Bit and
- Controller should not be using DDR Mode and
- Controller should advertise that it supports High Speed in
  capabilities register and
- MMC/SD clock coming out of controller > 25MHz

Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: Venkatraman S <svenkatr@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
arch/arm/plat-omap/include/plat/mmc.h
drivers/mmc/host/omap_hsmmc.c

index be76a23b34c408133bb1d397c2c3395cac59c66a..ed271fc255b23c5d3595f1a1725687cb74d077be 100644 (file)
@@ -19,6 +19,7 @@ ti,dual-volt: boolean, supports dual voltage cards
 "supply-name" examples are "vmmc", "vmmc_aux" etc
 ti,non-removable: non-removable slot (like eMMC)
 ti,needs-special-reset: Requires a special softreset sequence
+ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
 
 Example:
        mmc1: mmc@0x4809c000 {
index 8b4e4f2da2f5456c1d05321a641e5e473214fd62..346af5b490be0f02e187b3c080b3140f6192941a 100644 (file)
@@ -126,6 +126,7 @@ struct omap_mmc_platform_data {
                /* we can put the features above into this variable */
 #define HSMMC_HAS_PBIAS                (1 << 0)
 #define HSMMC_HAS_UPDATED_RESET        (1 << 1)
+#define HSMMC_HAS_HSPE_SUPPORT (1 << 2)
                unsigned features;
 
                int switch_pin;                 /* gpio (card detect) */
index 571cd80521c7336df718fd4ff35982931100864e..18d3f19ef4e5ab8dd473b0893d97fe7b8166db85 100644 (file)
@@ -63,6 +63,7 @@
 
 #define VS18                   (1 << 26)
 #define VS30                   (1 << 25)
+#define HSS                    (1 << 21)
 #define SDVS18                 (0x5 << 9)
 #define SDVS30                 (0x6 << 9)
 #define SDVS33                 (0x7 << 9)
@@ -90,6 +91,7 @@
 #define MSBS                   (1 << 5)
 #define BCE                    (1 << 1)
 #define FOUR_BIT               (1 << 1)
+#define HSPE                   (1 << 2)
 #define DDR                    (1 << 19)
 #define DW8                    (1 << 5)
 #define CC                     0x1
@@ -495,6 +497,7 @@ static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host)
        struct mmc_ios *ios = &host->mmc->ios;
        unsigned long regval;
        unsigned long timeout;
+       unsigned long clkdiv;
 
        dev_vdbg(mmc_dev(host->mmc), "Set clock to %uHz\n", ios->clock);
 
@@ -502,7 +505,8 @@ static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host)
 
        regval = OMAP_HSMMC_READ(host->base, SYSCTL);
        regval = regval & ~(CLKD_MASK | DTO_MASK);
-       regval = regval | (calc_divisor(host, ios) << 6) | (DTO << 16);
+       clkdiv = calc_divisor(host, ios);
+       regval = regval | (clkdiv << 6) | (DTO << 16);
        OMAP_HSMMC_WRITE(host->base, SYSCTL, regval);
        OMAP_HSMMC_WRITE(host->base, SYSCTL,
                OMAP_HSMMC_READ(host->base, SYSCTL) | ICE);
@@ -513,6 +517,27 @@ static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host)
                && time_before(jiffies, timeout))
                cpu_relax();
 
+       /*
+        * Enable High-Speed Support
+        * Pre-Requisites
+        *      - Controller should support High-Speed-Enable Bit
+        *      - Controller should not be using DDR Mode
+        *      - Controller should advertise that it supports High Speed
+        *        in capabilities register
+        *      - MMC/SD clock coming out of controller > 25MHz
+        */
+       if ((mmc_slot(host).features & HSMMC_HAS_HSPE_SUPPORT) &&
+           (ios->timing != MMC_TIMING_UHS_DDR50) &&
+           ((OMAP_HSMMC_READ(host->base, CAPA) & HSS) == HSS)) {
+               regval = OMAP_HSMMC_READ(host->base, HCTL);
+               if (clkdiv && (clk_get_rate(host->fclk)/clkdiv) > 25000000)
+                       regval |= HSPE;
+               else
+                       regval &= ~HSPE;
+
+               OMAP_HSMMC_WRITE(host->base, HCTL, regval);
+       }
+
        omap_hsmmc_start_clock(host);
 }
 
@@ -1715,6 +1740,9 @@ static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
        if (!of_property_read_u32(np, "max-frequency", &max_freq))
                pdata->max_freq = max_freq;
 
+       if (of_find_property(np, "ti,needs-special-hs-handling", NULL))
+               pdata->slots[0].features |= HSMMC_HAS_HSPE_SUPPORT;
+
        return pdata;
 }
 #else