Staging/iio/adc/touchscreen/MXS: remove old touchscreen detection implementation
authorJuergen Beisert <jbe@pengutronix.de>
Mon, 23 Sep 2013 14:36:00 +0000 (15:36 +0100)
committerJonathan Cameron <jic23@kernel.org>
Tue, 1 Oct 2013 15:19:17 +0000 (16:19 +0100)
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
CC: linux-arm-kernel@lists.infradead.org
CC: linux-input@vger.kernel.org
CC: devel@driverdev.osuosl.org
CC: Marek Vasut <marex@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
drivers/staging/iio/adc/mxs-lradc.c

index 9e4b6eabf1aaba479c292388d330cc4264e7df8b..18510d1ea5c85153017d09c61e70305c09c21b46 100644 (file)
@@ -186,7 +186,6 @@ struct mxs_lradc {
        bool                    use_touchbutton;
 
        struct input_dev        *ts_input;
-       struct work_struct      ts_work;
 
        enum mxs_lradc_id       soc;
        enum lradc_ts_plate     cur_plate; /* statemachine */
@@ -830,168 +829,6 @@ static const struct iio_info mxs_lradc_iio_info = {
        .read_raw               = mxs_lradc_read_raw,
 };
 
-static int mxs_lradc_ts_touched(struct mxs_lradc *lradc)
-{
-       uint32_t reg;
-
-       /* Enable touch detection. */
-       mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
-       mxs_lradc_reg_set(lradc, mxs_lradc_touch_detect_bit(lradc),
-                                                               LRADC_CTRL0);
-
-       msleep(LRADC_TS_SAMPLE_DELAY_MS);
-
-       reg = readl(lradc->base + LRADC_STATUS);
-
-       return reg & LRADC_STATUS_TOUCH_DETECT_RAW;
-}
-
-static int32_t mxs_lradc_ts_sample(struct mxs_lradc *lradc,
-                               enum lradc_ts_plate plate, int change)
-{
-       unsigned long delay, jiff;
-       uint32_t reg, ctrl0 = 0, chan = 0;
-       /* The touchscreen always uses CTRL4 slot #7. */
-       const uint8_t slot = 7;
-       uint32_t val;
-
-       /*
-        * There are three correct configurations of the controller sampling
-        * the touchscreen, each of these configuration provides different
-        * information from the touchscreen.
-        *
-        * The following table describes the sampling configurations:
-        * +-------------+-------+-------+-------+
-        * | Wire \ Axis |   X   |   Y   |   Z   |
-        * +---------------------+-------+-------+
-        * |   X+ (CH2)  |   HI  |   TS  |   TS  |
-        * +-------------+-------+-------+-------+
-        * |   X- (CH4)  |   LO  |   SH  |   HI  |
-        * +-------------+-------+-------+-------+
-        * |   Y+ (CH3)  |   SH  |   HI  |   HI  |
-        * +-------------+-------+-------+-------+
-        * |   Y- (CH5)  |   TS  |   LO  |   SH  |
-        * +-------------+-------+-------+-------+
-        *
-        * HI ... strong '1'  ; LO ... strong '0'
-        * SH ... sample here ; TS ... tri-state
-        *
-        * There are a few other ways of obtaining the Z coordinate
-        * (aka. pressure), but the one in the table seems to be the
-        * most reliable one.
-        */
-       switch (plate) {
-       case LRADC_SAMPLE_X:
-               ctrl0 = mxs_lradc_drive_x_plate(lradc);
-               chan = 3;
-               break;
-       case LRADC_SAMPLE_Y:
-               ctrl0 = mxs_lradc_drive_y_plate(lradc);
-               chan = 4;
-               break;
-       case LRADC_SAMPLE_PRESSURE:
-               ctrl0 = mxs_lradc_drive_pressure(lradc);
-               chan = 5;
-               break;
-       }
-
-       if (change) {
-               mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc),
-                                               LRADC_CTRL0);
-               mxs_lradc_reg_set(lradc, ctrl0, LRADC_CTRL0);
-
-               mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(slot),
-                                               LRADC_CTRL4);
-               mxs_lradc_reg_set(lradc,
-                               chan << LRADC_CTRL4_LRADCSELECT_OFFSET(slot),
-                               LRADC_CTRL4);
-       }
-
-       mxs_lradc_reg_clear(lradc, 0xffffffff, LRADC_CH(slot));
-       mxs_lradc_reg_set(lradc, 1 << slot, LRADC_CTRL0);
-
-       delay = jiffies + msecs_to_jiffies(LRADC_TS_SAMPLE_DELAY_MS);
-       do {
-               jiff = jiffies;
-               reg = readl_relaxed(lradc->base + LRADC_CTRL1);
-               if (reg & LRADC_CTRL1_LRADC_IRQ(slot))
-                       break;
-       } while (time_before(jiff, delay));
-
-       mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(slot), LRADC_CTRL1);
-
-       if (time_after_eq(jiff, delay))
-               return -ETIMEDOUT;
-
-       val = readl(lradc->base + LRADC_CH(slot));
-       val &= LRADC_CH_VALUE_MASK;
-
-       return val;
-}
-
-static int32_t mxs_lradc_ts_sample_filter(struct mxs_lradc *lradc,
-                               enum lradc_ts_plate plate)
-{
-       int32_t val, tot = 0;
-       int i;
-
-       val = mxs_lradc_ts_sample(lradc, plate, 1);
-
-       /* Delay a bit so the touchscreen is stable. */
-       mdelay(2);
-
-       for (i = 0; i < LRADC_TS_SAMPLE_AMOUNT; i++) {
-               val = mxs_lradc_ts_sample(lradc, plate, 0);
-               tot += val;
-       }
-
-       return tot / LRADC_TS_SAMPLE_AMOUNT;
-}
-
-static void mxs_lradc_ts_work(struct work_struct *ts_work)
-{
-       struct mxs_lradc *lradc = container_of(ts_work,
-                               struct mxs_lradc, ts_work);
-       int val_x, val_y, val_p;
-       bool valid = false;
-
-       while (mxs_lradc_ts_touched(lradc)) {
-               /* Disable touch detector so we can sample the touchscreen. */
-               mxs_lradc_reg_clear(lradc, mxs_lradc_touch_detect_bit(lradc),
-                                               LRADC_CTRL0);
-
-               if (likely(valid)) {
-                       input_report_abs(lradc->ts_input, ABS_X, val_x);
-                       input_report_abs(lradc->ts_input, ABS_Y, val_y);
-                       input_report_abs(lradc->ts_input, ABS_PRESSURE, val_p);
-                       input_report_key(lradc->ts_input, BTN_TOUCH, 1);
-                       input_sync(lradc->ts_input);
-               }
-
-               valid = false;
-
-               val_x = mxs_lradc_ts_sample_filter(lradc, LRADC_SAMPLE_X);
-               if (val_x < 0)
-                       continue;
-               val_y = mxs_lradc_ts_sample_filter(lradc, LRADC_SAMPLE_Y);
-               if (val_y < 0)
-                       continue;
-               val_p = mxs_lradc_ts_sample_filter(lradc, LRADC_SAMPLE_PRESSURE);
-               if (val_p < 0)
-                       continue;
-
-               valid = true;
-       }
-
-       input_report_abs(lradc->ts_input, ABS_PRESSURE, 0);
-       input_report_key(lradc->ts_input, BTN_TOUCH, 0);
-       input_sync(lradc->ts_input);
-
-       /* Restart the touchscreen interrupts. */
-       mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ, LRADC_CTRL1);
-       mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
-}
-
 static int mxs_lradc_ts_open(struct input_dev *dev)
 {
        struct mxs_lradc *lradc = input_get_drvdata(dev);