brcmsmac: radio on led support
authorPiotr Haber <phaber@broadcom.com>
Sun, 3 Mar 2013 11:45:20 +0000 (12:45 +0100)
committerJohn W. Linville <linville@tuxdriver.com>
Wed, 6 Mar 2013 21:28:20 +0000 (16:28 -0500)
Add support for radio on led indicator.
Control led via BCMA gpio driver.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Piotr Haber <phaber@broadcom.com>
[arend@broadcom.com: modify Makefile for conditional compile led.c]
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/brcm80211/Kconfig
drivers/net/wireless/brcm80211/brcmsmac/Makefile
drivers/net/wireless/brcm80211/brcmsmac/led.c [new file with mode: 0644]
drivers/net/wireless/brcm80211/brcmsmac/led.h [new file with mode: 0644]
drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h

index 1d92d874ebb61e487a33a2a8827e864ef39f1a15..747e9317dabdfc0e195348a8696cd78f9ae14e75 100644 (file)
@@ -12,8 +12,9 @@ config BRCMSMAC
        select CORDIC
        ---help---
          This module adds support for PCIe wireless adapters based on Broadcom
-         IEEE802.11n SoftMAC chipsets.  If you choose to build a module, it'll
-         be called brcmsmac.ko.
+         IEEE802.11n SoftMAC chipsets. It also has WLAN led support, which will
+         be available if you select BCMA_DRIVER_GPIO. If you choose to build a
+         module, the driver will be called brcmsmac.ko.
 
 config BRCMFMAC
        tristate "Broadcom IEEE802.11n embedded FullMAC WLAN driver"
index d3d4151c3eda8bdd94f06110f465bfba98a96cea..cba19d839b77951e14db3fc01115c475a79b09eb 100644 (file)
@@ -43,6 +43,10 @@ BRCMSMAC_OFILES := \
        brcms_trace_events.o \
        debug.o
 
+ifdef CONFIG_BCMA_DRIVER_GPIO
+BRCMSMAC_OFILES += led.o
+endif
+
 MODULEPFX := brcmsmac
 
 obj-$(CONFIG_BRCMSMAC) += $(MODULEPFX).o
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/led.c b/drivers/net/wireless/brcm80211/brcmsmac/led.c
new file mode 100644 (file)
index 0000000..74b17ce
--- /dev/null
@@ -0,0 +1,126 @@
+#include <net/mac80211.h>
+#include <linux/bcma/bcma_driver_chipcommon.h>
+#include <linux/gpio.h>
+
+#include "mac80211_if.h"
+#include "pub.h"
+#include "main.h"
+#include "led.h"
+
+       /* number of leds */
+#define  BRCMS_LED_NO          4
+       /* behavior mask */
+#define  BRCMS_LED_BEH_MASK    0x7f
+       /* activelow (polarity) bit */
+#define  BRCMS_LED_AL_MASK     0x80
+       /* radio enabled */
+#define  BRCMS_LED_RADIO       3
+
+static void brcms_radio_led_ctrl(struct brcms_info *wl, bool state)
+{
+       if (wl->radio_led.gpio == -1)
+               return;
+
+       if (wl->radio_led.active_low)
+               state = !state;
+
+       if (state)
+               gpio_set_value(wl->radio_led.gpio, 1);
+       else
+               gpio_set_value(wl->radio_led.gpio, 0);
+}
+
+
+/* Callback from the LED subsystem. */
+static void brcms_led_brightness_set(struct led_classdev *led_dev,
+                                  enum led_brightness brightness)
+{
+       struct brcms_info *wl = container_of(led_dev,
+               struct brcms_info, led_dev);
+       brcms_radio_led_ctrl(wl, brightness);
+}
+
+void brcms_led_unregister(struct brcms_info *wl)
+{
+       if (wl->led_dev.dev)
+               led_classdev_unregister(&wl->led_dev);
+       if (wl->radio_led.gpio != -1)
+               gpio_free(wl->radio_led.gpio);
+}
+
+int brcms_led_register(struct brcms_info *wl)
+{
+       int i, err;
+       struct brcms_led *radio_led = &wl->radio_led;
+       /* get CC core */
+       struct bcma_drv_cc *cc_drv  = &wl->wlc->hw->d11core->bus->drv_cc;
+       struct gpio_chip *bcma_gpio = &cc_drv->gpio;
+       struct ssb_sprom *sprom = &wl->wlc->hw->d11core->bus->sprom;
+       u8 *leds[] = { &sprom->gpio0,
+               &sprom->gpio1,
+               &sprom->gpio2,
+               &sprom->gpio3 };
+       unsigned gpio = -1;
+       bool active_low = false;
+
+       /* none by default */
+       radio_led->gpio = -1;
+       radio_led->active_low = false;
+
+       if (!bcma_gpio || !gpio_is_valid(bcma_gpio->base))
+               return -ENODEV;
+
+       /* find radio enabled LED */
+       for (i = 0; i < BRCMS_LED_NO; i++) {
+               u8 led = *leds[i];
+               if ((led & BRCMS_LED_BEH_MASK) == BRCMS_LED_RADIO) {
+                       gpio = bcma_gpio->base + i;
+                       if (led & BRCMS_LED_AL_MASK)
+                               active_low = true;
+                       break;
+               }
+       }
+
+       if (gpio == -1 || !gpio_is_valid(gpio))
+               return -ENODEV;
+
+       /* request and configure LED gpio */
+       err = gpio_request_one(gpio,
+                               active_low ? GPIOF_OUT_INIT_HIGH
+                                       : GPIOF_OUT_INIT_LOW,
+                               "radio on");
+       if (err) {
+               wiphy_err(wl->wiphy, "requesting led gpio %d failed (err: %d)\n",
+                         gpio, err);
+               return err;
+       }
+       err = gpio_direction_output(gpio, 1);
+       if (err) {
+               wiphy_err(wl->wiphy, "cannot set led gpio %d to output (err: %d)\n",
+                         gpio, err);
+               return err;
+       }
+
+       snprintf(wl->radio_led.name, sizeof(wl->radio_led.name),
+                "brcmsmac-%s:radio", wiphy_name(wl->wiphy));
+
+       wl->led_dev.name = wl->radio_led.name;
+       wl->led_dev.default_trigger =
+               ieee80211_get_radio_led_name(wl->pub->ieee_hw);
+       wl->led_dev.brightness_set = brcms_led_brightness_set;
+       err = led_classdev_register(wiphy_dev(wl->wiphy), &wl->led_dev);
+
+       if (err) {
+               wiphy_err(wl->wiphy, "cannot register led device: %s (err: %d)\n",
+                         wl->radio_led.name, err);
+               return err;
+       }
+
+       wiphy_info(wl->wiphy, "registered radio enabled led device: %s gpio: %d\n",
+                  wl->radio_led.name,
+                  gpio);
+       radio_led->gpio = gpio;
+       radio_led->active_low = active_low;
+
+       return 0;
+}
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/led.h b/drivers/net/wireless/brcm80211/brcmsmac/led.h
new file mode 100644 (file)
index 0000000..17a0b1f
--- /dev/null
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2012 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _BRCM_LED_H_
+#define _BRCM_LED_H_
+struct brcms_led {
+       char name[32];
+       unsigned gpio;
+       bool active_low;
+};
+
+#ifdef CONFIG_BCMA_DRIVER_GPIO
+void brcms_led_unregister(struct brcms_info *wl);
+int brcms_led_register(struct brcms_info *wl);
+#else
+static inline void brcms_led_unregister(struct brcms_info *wl) {};
+static inline int brcms_led_register(struct brcms_info *wl)
+{
+       return -ENOTSUPP;
+};
+#endif
+
+#endif /* _BRCM_LED_H_ */
index c6451c61407a8c4510c97056bde23ef1ee88c060..c70cf7b654cd5b8c0d07464d465d8f40c1a0face 100644 (file)
@@ -34,6 +34,7 @@
 #include "mac80211_if.h"
 #include "main.h"
 #include "debug.h"
+#include "led.h"
 
 #define N_TX_QUEUES    4 /* #tx queues on mac80211<->driver interface */
 #define BRCMS_FLUSH_TIMEOUT    500 /* msec */
@@ -904,6 +905,7 @@ static void brcms_remove(struct bcma_device *pdev)
        struct brcms_info *wl = hw->priv;
 
        if (wl->wlc) {
+               brcms_led_unregister(wl);
                wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, false);
                wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
                ieee80211_unregister_hw(hw);
@@ -1151,6 +1153,8 @@ static int brcms_bcma_probe(struct bcma_device *pdev)
                pr_err("%s: brcms_attach failed!\n", __func__);
                return -ENODEV;
        }
+       brcms_led_register(wl);
+
        return 0;
 }
 
index 947ccacf43e6f498dacfaceed5c3853c00c99d96..4090032e81a29f5d4e9aaf0b9258ae8d8c80bfcc 100644 (file)
 #include <linux/timer.h>
 #include <linux/interrupt.h>
 #include <linux/workqueue.h>
+#include <linux/leds.h>
 
 #include "ucode_loader.h"
+#include "led.h"
 /*
  * Starting index for 5G rates in the
  * legacy rate table.
@@ -81,6 +83,8 @@ struct brcms_info {
        struct wiphy *wiphy;
        struct brcms_ucode ucode;
        bool mute_tx;
+       struct brcms_led radio_led;
+       struct led_classdev led_dev;
 };
 
 /* misc callbacks */