ARM: S3C64XX: Add hookup for Tomatin module on Cragganmore
authorMark Brown <broonie@opensource.wolfsonmicro.com>
Thu, 12 Jan 2012 02:04:56 +0000 (11:04 +0900)
committerKukjin Kim <kgene.kim@samsung.com>
Fri, 20 Jan 2012 00:39:37 +0000 (09:39 +0900)
The Tomatin module carries a WM0010 audio DSP. Provide basic hookup for
this, though additional platform data will be needed to fully integrate
with the driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
arch/arm/mach-s3c64xx/mach-crag6410-module.c
arch/arm/mach-s3c64xx/mach-crag6410.c

index cd3c97e2ee75045afb4a855f7adf03066bca478b..b4ed351e701d88a5db7673efdb440251c1a4caec 100644 (file)
@@ -11,6 +11,7 @@
 #include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
+#include <linux/spi/spi.h>
 
 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/gpio.h>
 #include <sound/wm8962.h>
 #include <sound/wm9081.h>
 
+#include <plat/s3c64xx-spi.h>
+
 #include <mach/crag6410.h>
 
+static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
+       .set_level = gpio_set_value,
+       .line = S3C64XX_GPC(3),
+};
+
+static struct spi_board_info wm1253_devs[] = {
+       [0] = {
+               .modalias       = "wm0010",
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .mode           = SPI_MODE_0,
+               .controller_data = &wm0010_spi_csinfo,
+       },
+};
+
 static struct wm5100_pdata wm5100_pdata = {
        .ldo_ena = S3C64XX_GPN(7),
        .irq_flags = IRQF_TRIGGER_HIGH,
@@ -158,6 +176,8 @@ static __devinitdata const struct {
        const char *name;
        const struct i2c_board_info *i2c_devs;
        int num_i2c_devs;
+       const struct spi_board_info *spi_devs;
+       int num_spi_devs;
 } gf_mods[] = {
        { .id = 0x01, .name = "1250-EV1 Springbank" },
        { .id = 0x02, .name = "1251-EV1 Jura" },
@@ -165,7 +185,8 @@ static __devinitdata const struct {
        { .id = 0x11, .name = "6249-EV2 Glenfarclas", },
        { .id = 0x21, .name = "1275-EV1 Mortlach" },
        { .id = 0x25, .name = "1274-EV1 Glencadam" },
-       { .id = 0x31, .name = "1253-EV1 Tomatin", },
+       { .id = 0x31, .name = "1253-EV1 Tomatin",
+         .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
        { .id = 0x39, .name = "1254-EV1 Dallas Dhu",
          .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
        { .id = 0x3a, .name = "1259-EV1 Tobermory",
@@ -197,12 +218,16 @@ static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
        if (i < ARRAY_SIZE(gf_mods)) {
                dev_info(&i2c->dev, "%s revision %d\n",
                         gf_mods[i].name, rev + 1);
+
                for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
                        if (!i2c_new_device(i2c->adapter,
                                            &(gf_mods[i].i2c_devs[j])))
                                dev_err(&i2c->dev,
                                        "Failed to register dev: %d\n", ret);
                }
+
+               spi_register_board_info(gf_mods[i].spi_devs,
+                                       gf_mods[i].num_spi_devs);
        } else {
                dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n",
                         id, rev + 1);
index 7539a2999178ef9869855248b33877bdc9dafcc8..f93caad1dd9bc492b130f7276de4c44ca8290788 100644 (file)
@@ -576,11 +576,19 @@ static struct s3c2410_platform_i2c i2c0_pdata = {
        .frequency = 400000,
 };
 
+static struct regulator_consumer_supply pvdd_1v2_consumers[] __initdata = {
+       REGULATOR_SUPPLY("DCVDD", "spi0.0"),
+       REGULATOR_SUPPLY("AVDD", "spi0.0"),
+};
+
 static struct regulator_init_data pvdd_1v2 __initdata = {
        .constraints = {
                .name = "PVDD_1V2",
-               .always_on = 1,
+               .valid_ops_mask = REGULATOR_CHANGE_STATUS,
        },
+
+       .consumer_supplies = pvdd_1v2_consumers,
+       .num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers),
 };
 
 static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
@@ -594,6 +602,7 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
        REGULATOR_SUPPLY("AVDD2", "1-001a"),
        REGULATOR_SUPPLY("DCVDD", "1-001a"),
        REGULATOR_SUPPLY("AVDD", "1-001a"),
+       REGULATOR_SUPPLY("DBVDD", "spi0.0"),
 };
 
 static struct regulator_init_data pvdd_1v8 __initdata = {