*
* @dev: the device structure
*
+ * Return: 0 on success, <0 on failure.
*/
int mei_amthif_host_init(struct mei_device *dev)
{
return mei_amthif_send_cmd(dev, cb);
}
/**
- * mei_amthif_run_next_cmd
+ * mei_amthif_run_next_cmd - send next amt command from queue
*
* @dev: the device structure
*/
}
/**
- * mei_amthif_irq_read_message - read routine after ISR to
+ * mei_amthif_irq_read_msg - read routine after ISR to
* handle the read amthif message
*
* @dev: the device structure
* mei_cl_flush_queues - flushes queue lists belonging to cl.
*
* @cl: host client
+ *
+ * Return: 0 on success, -EINVAL if cl or cl->dev is NULL.
*/
int mei_cl_flush_queues(struct mei_cl *cl)
{
* mei_cl_unlink - remove me_cl from the list
*
* @cl: host client
+ *
+ * Return: always 0
*/
int mei_cl_unlink(struct mei_cl *cl)
{
* mei_cl_read_start - the start read client message function.
*
* @cl: host client
+ * @length: number of bytes to read
*
* Return: 0 on success, <0 on failure.
*/
*
* @cl: host client
* @cb: write callback with filled data
+ * @blocking: block until completed
*
* Return: number of bytes sent on success, <0 on failure.
*/
*
* @dev: the mei device structure
* @name: the mei device name
+ *
+ * Return: 0 on success, <0 on failure.
*/
int mei_dbgfs_register(struct mei_device *dev, const char *name)
{
* @cl: client
* @hbm_cmd: host bus message command
* @len: buffer length
+ *
+ * Return: 0 on success, <0 on failure.
*/
static inline
int mei_hbm_cl_write(struct mei_device *dev,
* and ignores the H_IS bit for it is write-one-to-zero.
*
* @hw: the me hardware structure
+ * @hcsr: new register value
*/
static inline void mei_hcsr_set(struct mei_me_hw *hw, u32 hcsr)
{
*
* @dev: mei device
* @fw_status: fw status register values
+ *
+ * Return: 0 on success, error otherwise
*/
static int mei_me_fw_status(struct mei_device *dev,
struct mei_fw_status *fw_status)
* mei_me_pg_state - translate internal pg state
* to the mei power gating state
*
- * @hw - me hardware
- * returns: MEI_PG_OFF if aliveness is on and MEI_PG_ON otherwise
+ * @dev: mei device
+ *
+ * Return: MEI_PG_OFF if aliveness is on and MEI_PG_ON otherwise
*/
static inline enum mei_pg_state mei_me_pg_state(struct mei_device *dev)
{
}
/**
- * mei_clear_interrupts - clear and stop interrupts
+ * mei_me_intr_clear - clear and stop interrupts
*
* @dev: the device structure
*/
}
/**
- * mei_disable_interrupts - disables mei device interrupts
+ * mei_me_intr_disable - disables mei device interrupts
*
* @dev: the device structure
*/
*
* @dev: the device structure
* @intr_enable: if interrupt should be enabled after reset.
+ *
+ * Return: always 0
*/
static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable)
{
/**
* mei_me_host_set_ready - enable device
*
- * @dev - mei device
- * returns bool
+ * @dev: mei device
*/
-
static void mei_me_host_set_ready(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
hw->host_hw_state |= H_IE | H_IG | H_RDY;
mei_hcsr_set(hw, hw->host_hw_state);
}
+
/**
* mei_me_host_is_ready - check whether the host has turned ready
*
return (hw->me_hw_state & ME_RDY_HRA) == ME_RDY_HRA;
}
+/**
+ * mei_me_hw_ready_wait - wait until the me(hw) has turned ready
+ * or timeout is reached
+ *
+ * @dev: mei device
+ * Return: 0 on success, error otherwise
+ */
static int mei_me_hw_ready_wait(struct mei_device *dev)
{
mutex_unlock(&dev->device_lock);
return 0;
}
+/**
+ * mei_me_hw_start - hw start routine
+ *
+ * @dev: mei device
+ * Return: 0 on success, error otherwise
+ */
static int mei_me_hw_start(struct mei_device *dev)
{
int ret = mei_me_hw_ready_wait(dev);
return empty_slots;
}
+/**
+ * mei_me_hbuf_max_len - returns size of hw buffer.
+ *
+ * @dev: the device structure
+ *
+ * Return: size of hw buffer in bytes
+ */
static size_t mei_me_hbuf_max_len(const struct mei_device *dev)
{
return dev->hbuf_depth * sizeof(u32) - sizeof(struct mei_msg_hdr);
* @dev: the device structure
* @buffer: message buffer will be written
* @buffer_length: message size will be read
+ *
+ * Return: always 0
*/
static int mei_me_read_slots(struct mei_device *dev, unsigned char *buffer,
unsigned long buffer_length)
#define MEI_ME_RPM_TIMEOUT 500 /* ms */
/**
+ * struct mei_me_hw - me hw specific data
+ *
* @cfg: per device generation config and ops
+ * @mem_addr: io memory address
+ * @host_hw_state: cached host state
+ * @me_hw_state: cached me (fw) state
+ * @pg_state: power gating state
*/
struct mei_me_hw {
const struct mei_cfg *cfg;
#include "hbm.h"
/**
- * mei_txe_reg_read - Reads 32bit data from the device
+ * mei_txe_reg_read - Reads 32bit data from the txe device
*
* @base_addr: registers base address
* @offset: register offset
*
+ * Return: register value
*/
static inline u32 mei_txe_reg_read(void __iomem *base_addr,
unsigned long offset)
}
/**
- * mei_txe_reg_write - Writes 32bit data to the device
+ * mei_txe_reg_write - Writes 32bit data to the txe device
*
* @base_addr: registers base address
* @offset: register offset
/**
* mei_txe_sec_reg_read_silent - Reads 32bit data from the SeC BAR
*
- * @dev: the device structure
+ * @hw: the txe hardware structure
* @offset: register offset
*
* Doesn't check for aliveness while Reads 32bit data from the SeC BAR
+ *
+ * Return: register value
*/
static inline u32 mei_txe_sec_reg_read_silent(struct mei_txe_hw *hw,
unsigned long offset)
/**
* mei_txe_sec_reg_read - Reads 32bit data from the SeC BAR
*
- * @dev: the device structure
+ * @hw: the txe hardware structure
* @offset: register offset
*
* Reads 32bit data from the SeC BAR and shout loud if aliveness is not set
+ *
+ * Return: register value
*/
static inline u32 mei_txe_sec_reg_read(struct mei_txe_hw *hw,
unsigned long offset)
/**
* mei_txe_br_reg_read - Reads 32bit data from the Bridge BAR
*
- * @hw: the device structure
+ * @hw: the txe hardware structure
* @offset: offset from which to read the data
*
+ * Return: the byte read.
*/
static inline u32 mei_txe_br_reg_read(struct mei_txe_hw *hw,
unsigned long offset)
* Request for aliveness change and returns true if the change is
* really needed and false if aliveness is already
* in the requested state
- * Requires device lock to be held
+ *
+ * Locking: called under "dev->device_lock" lock
+ *
+ * Return: true if request was send
*/
static bool mei_txe_aliveness_set(struct mei_device *dev, u32 req)
{
*
* Extract HICR_HOST_ALIVENESS_RESP_ACK bit from
* from HICR_HOST_ALIVENESS_REQ register value
+ *
+ * Return: SICR_HOST_ALIVENESS_REQ_REQUESTED bit value
*/
static u32 mei_txe_aliveness_req_get(struct mei_device *dev)
{
/**
* mei_txe_aliveness_get - get aliveness response register value
+ *
* @dev: the device structure
*
- * Extract HICR_HOST_ALIVENESS_RESP_ACK bit
- * from HICR_HOST_ALIVENESS_RESP register value
+ * Return: HICR_HOST_ALIVENESS_RESP_ACK bit from HICR_HOST_ALIVENESS_RESP
+ * register
*/
static u32 mei_txe_aliveness_get(struct mei_device *dev)
{
* mei_txe_aliveness_set_sync - sets an wait for aliveness to complete
*
* @dev: the device structure
+ * @req: requested aliveness value
*
* Return: 0 on success and < 0 otherwise
*/
* mei_txe_is_input_ready - check if TXE is ready for receiving data
*
* @dev: the device structure
+ *
+ * Return: true if INPUT STATUS READY bit is set
*/
static bool mei_txe_is_input_ready(struct mei_device *dev)
{
*
* Checks if there are pending interrupts
* only Aliveness, Readiness, Input ready, and Output doorbell are relevant
+ *
+ * Return: true if there are pending interrupts
*/
static bool mei_txe_pending_interrupts(struct mei_device *dev)
{
/* Readiness */
/**
- * mei_txe_readiness_set_host_rdy
+ * mei_txe_readiness_set_host_rdy - set host readiness bit
*
* @dev: the device structure
*/
}
/**
- * mei_txe_readiness_clear
+ * mei_txe_readiness_clear - clear host readiness bit
*
* @dev: the device structure
*/
* mei_txe_readiness_is_sec_rdy - check readiness
* for HICR_SEC_IPC_READINESS_SEC_RDY
*
- * @readiness - cached readiness state
+ * @readiness: cached readiness state
+ *
+ * Return: true if readiness bit is set
*/
static inline bool mei_txe_readiness_is_sec_rdy(u32 readiness)
{
* mei_txe_hw_is_ready - check if the hw is ready
*
* @dev: the device structure
+ *
+ * Return: true if sec is ready
*/
static bool mei_txe_hw_is_ready(struct mei_device *dev)
{
* mei_txe_host_is_ready - check if the host is ready
*
* @dev: the device structure
+ *
+ * Return: true if host is ready
*/
static inline bool mei_txe_host_is_ready(struct mei_device *dev)
{
*
* @dev: mei device
* @fw_status: fw status register values
+ *
+ * Return: 0 on success, error otherwise
*/
static int mei_txe_fw_status(struct mei_device *dev,
struct mei_fw_status *fw_status)
* @header: header of message
* @buf: message buffer will be written
*
- * Return: if success, 0 - otherwise.
+ * Return: 0 if success, <0 - otherwise.
*/
static int mei_txe_write(struct mei_device *dev,
*
* @dev: the device structure
*
- * Return: PAYLOAD_SIZE - 4
+ * Return: the PAYLOAD_SIZE - 4
*/
static size_t mei_txe_hbuf_max_len(const struct mei_device *dev)
{
*
* @dev: the device structure
*
- * Return: 0 on success and < 0 in case of error
+ * Return: 0 on success an error code otherwise
*/
static int mei_txe_hw_start(struct mei_device *dev)
{
*
* @dev: the device structure
* @do_ack: acknowledge interrupts
+ *
+ * Return: true if found interrupts to process.
*/
static bool mei_txe_check_and_ack_intrs(struct mei_device *dev, bool do_ack)
{
* @dev_id: pointer to the device structure
*
* Return: IRQ_HANDLED
- *
*/
irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id)
{
/**
* mei_txe_dev_init - allocates and initializes txe hardware specific structure
*
- * @pdev - pci device
- *
- * Return: struct mei_device * on success or NULL;
+ * @pdev: pci device
*
+ * Return: struct mei_device * on success or NULL
*/
struct mei_device *mei_txe_dev_init(struct pci_dev *pdev)
{
* @dev: the device structure
* @addr: physical address start of the range
* @range: physical range size
+ *
+ * Return: 0 on success an error code otherwise
*/
int mei_txe_setup_satt2(struct mei_device *dev, phys_addr_t addr, u32 range)
{
* @mem_addr: SeC and BRIDGE bars
* @aliveness: aliveness (power gating) state of the hardware
* @readiness: readiness state of the hardware
+ * @slots: number of empty slots
* @wait_aliveness_resp: aliveness wait queue
* @intr_cause: translated interrupt cause
*/
* @MEI_HBMS_NOT_ALLOWED : operation not allowed
* @MEI_HBMS_ALREADY_STARTED : system is already started
* @MEI_HBMS_NOT_STARTED : system not started
+ *
+ * @MEI_HBMS_MAX : sentinel
*/
enum mei_hbm_status {
MEI_HBMS_SUCCESS = 0,
* mei_cancel_work - Cancel mei background jobs
*
* @dev: the device structure
- *
- * Return: 0 on success or < 0 if the reset hasn't succeeded
*/
void mei_cancel_work(struct mei_device *dev)
{
* mei_reset - resets host and fw.
*
* @dev: the device structure
+ *
+ * Return: 0 on success or < 0 if the reset hasn't succeeded
*/
int mei_reset(struct mei_device *dev)
{
}
/**
- * mei_irq_read_client_message - process client message
+ * mei_cl_irq_read_msg - process client message
*
* @dev: the device structure
* @mei_hdr: header of mei client message
/**
- * mei_cl_irq_close - processes client read related operation from the
+ * mei_cl_irq_read - processes client read related operation from the
* interrupt thread context - request for flow control credits
*
* @cl: client
/**
* enum mei_cb_file_ops - file operation associated with the callback
- * @MEI_FOP_READ - read
- * @MEI_FOP_WRITE - write
- * @MEI_FOP_CONNECT - connect
- * @MEI_FOP_DISCONNECT - disconnect
- * @MEI_FOP_DISCONNECT_RSP - disconnect response
+ * @MEI_FOP_READ: read
+ * @MEI_FOP_WRITE: write
+ * @MEI_FOP_CONNECT: connect
+ * @MEI_FOP_DISCONNECT: disconnect
+ * @MEI_FOP_DISCONNECT_RSP: disconnect response
*/
enum mei_cb_file_ops {
MEI_FOP_READ = 0,
* @list: link in callback queue
* @cl: file client who is running this operation
* @fop_type: file operation type
+ * @request_buffer: buffer to store request data
+ * @response_buffer: buffer to store response data
+ * @buf_idx: last read index
+ * @read_time: last read operation time stamp (iamthif)
+ * @file_object: pointer to file structure
+ * @internal: communication between driver and FW flag
*/
struct mei_cl_cb {
struct list_head list;
u32 internal:1;
};
-/* MEI client instance carried as file->private_data*/
+/**
+ * struct mei_cl - me client host representation
+ * carried in file->private_data
+ *
+ * @link: link in the clients list
+ * @dev: mei parent device
+ * @state: file operation state
+ * @tx_wait: wait queue for tx completion
+ * @rx_wait: wait queue for rx completion
+ * @wait: wait queue for management operation
+ * @status: connection status
+ * @cl_uuid: client uuid name
+ * @host_client_id: host id
+ * @me_client_id: me/fw id
+ * @mei_flow_ctrl_creds: transmit flow credentials
+ * @timer_count: watchdog timer for operation completion
+ * @reading_state: state of the rx
+ * @writing_state: state of the tx
+ * @read_cb: current pending reading callback
+ *
+ * @device: device on the mei client bus
+ * @device_link: link to bus clients
+ */
struct mei_cl {
struct list_head link;
struct mei_device *dev;
wait_queue_head_t rx_wait;
wait_queue_head_t wait;
int status;
- /* ID of client connected */
uuid_le cl_uuid;
u8 host_client_id;
u8 me_client_id;
* @dev: linux driver model device pointer
* @cl: mei client
* @ops: ME transport ops
+ * @event_work: async work to execute event callback
* @event_cb: Drivers register this callback to get asynchronous ME
* events (e.g. Rx buffer pending) notifications.
+ * @event_context: event callback run context
* @events: Events bitmask sent to the driver.
* @priv_data: client private data
*/
};
- /**
+/**
* enum mei_pg_event - power gating transition events
*
* @MEI_PG_EVENT_IDLE: the driver is not in power gating transition
/**
* struct mei_device - MEI private device struct
-
+ *
* @dev : device on a bus
* @cdev : character device
* @minor : minor number allocated for device
*
- * @reset_count : limits the number of consecutive resets
- * @hbm_state : state of host bus message protocol
+ * @read_list : read completion list
+ * @write_list : write pending list
+ * @write_waiting_list : write completion list
+ * @ctrl_wr_list : pending control write list
+ * @ctrl_rd_list : pending control read list
*
- * @hbm_f_pg_supported : hbm feature pgi protocol
+ * @file_list : list of opened handles
+ * @open_handle_count: number of opened handles
+ *
+ * @device_lock : big device lock
+ * @timer_work : MEI timer delayed work (timeouts)
+ *
+ * @recvd_hw_ready : hw ready message received flag
+ *
+ * @wait_hw_ready : wait queue for receive HW ready message form FW
+ * @wait_pg : wait queue for receive PG message from FW
+ * @wait_hbm_start : wait queue for receive HBM start message from FW
+ * @wait_stop_wd : wait queue for receive WD stop message from FW
+ *
+ * @reset_count : number of consecutive resets
+ * @dev_state : device state
+ * @hbm_state : state of host bus message protocol
+ * @init_clients_timer : HBM init handshake timeout
*
* @pg_event : power gating event
- * @mem_addr : mem mapped base register address
-
+ * @pg_domain : runtime PM domain
+ *
+ * @rd_msg_buf : control messages buffer
+ * @rd_msg_hdr : read message header storage
+ *
* @hbuf_depth : depth of hardware host/write buffer is slots
* @hbuf_is_ready : query if the host host/write buffer is ready
* @wr_msg : the buffer for hbm control messages
+ *
+ * @version : HBM protocol version in use
+ * @hbm_f_pg_supported : hbm feature pgi protocol
+ *
+ * @me_clients : list of FW clients
+ * @me_clients_map : FW clients bit map
+ * @host_clients_map : host clients id pool
+ * @me_client_index : last FW client index in enumeration
+ *
+ * @wd_cl : watchdog client
+ * @wd_state : watchdog client state
+ * @wd_pending : watchdog command is pending
+ * @wd_timeout : watchdog expiration timeout
+ * @wd_data : watchdog message buffer
+ *
+ * @amthif_cmd_list : amthif list for cmd waiting
+ * @amthif_rd_complete_list : amthif list for reading completed cmd data
+ * @iamthif_file_object : file for current amthif operation
+ * @iamthif_cl : amthif host client
+ * @iamthif_current_cb : amthif current operation callback
+ * @iamthif_open_count : number of opened amthif connections
+ * @iamthif_mtu : amthif client max message length
+ * @iamthif_timer : time stamp of current amthif command completion
+ * @iamthif_stall_timer : timer to detect amthif hang
+ * @iamthif_msg_buf : amthif current message buffer
+ * @iamthif_msg_buf_size : size of current amthif message request buffer
+ * @iamthif_msg_buf_index : current index in amthif message request buffer
+ * @iamthif_state : amthif processor state
+ * @iamthif_flow_control_pending: amthif waits for flow control
+ * @iamthif_ioctl : wait for completion if amthif control message
+ * @iamthif_canceled : current amthif command is canceled
+ *
+ * @init_work : work item for the device init
+ * @reset_work : work item for the device reset
+ *
+ * @device_list : mei client bus list
+ *
+ * @dbgfs_dir : debugfs mei root directory
+ *
+ * @ops: : hw specific operations
+ * @hw : hw specific data
*/
struct mei_device {
struct device *dev;
struct cdev cdev;
int minor;
- /*
- * lists of queues
- */
- /* array of pointers to aio lists */
- struct mei_cl_cb read_list; /* driver read queue */
- struct mei_cl_cb write_list; /* driver write queue */
- struct mei_cl_cb write_waiting_list; /* write waiting queue */
- struct mei_cl_cb ctrl_wr_list; /* managed write IOCTL list */
- struct mei_cl_cb ctrl_rd_list; /* managed read IOCTL list */
+ struct mei_cl_cb read_list;
+ struct mei_cl_cb write_list;
+ struct mei_cl_cb write_waiting_list;
+ struct mei_cl_cb ctrl_wr_list;
+ struct mei_cl_cb ctrl_rd_list;
- /*
- * list of files
- */
struct list_head file_list;
long open_handle_count;
- /*
- * lock for the device
- */
- struct mutex device_lock; /* device lock */
- struct delayed_work timer_work; /* MEI timer delayed work (timeouts) */
+ struct mutex device_lock;
+ struct delayed_work timer_work;
bool recvd_hw_ready;
/*
struct dev_pm_domain pg_domain;
#endif /* CONFIG_PM_RUNTIME */
- unsigned char rd_msg_buf[MEI_RD_MSG_BUF_SIZE]; /* control messages */
+ unsigned char rd_msg_buf[MEI_RD_MSG_BUF_SIZE];
u32 rd_msg_hdr;
/* write buffer */
/**
* mei_data2slots - get slots - number of (dwords) from a message length
* + size of the mei header
+ *
* @length: size of the messages in bytes
*
* Return: number of slots
}
/**
- * mei_slots2data- get data in slots - bytes from slots
+ * mei_slots2data - get data in slots - bytes from slots
+ *
* @slots: number of available slots
+ *
* Return: number of bytes in slots
*/
static inline u32 mei_slots2data(int slots)
* @cl: NFC host client
* @cl_info: NFC info host client
* @init_work: perform connection to the info client
+ * @send_wq: send completion wait queue
* @fw_ivn: NFC Interface Version Number
* @vendor_id: NFC manufacturer ID
* @radio_type: NFC radio type
+ * @bus_name: bus name
+ *
+ * @req_id: message counter
+ * @recv_req_id: reception message counter
*/
struct mei_nfc_dev {
struct mei_cl *cl;
#endif /* CONFIG_PM_RUNTIME */
/**
- * mei_quirk_probe - probe for devices that doesn't valid ME interface
+ * mei_me_quirk_probe - probe for devices that doesn't valid ME interface
*
* @pdev: PCI device structure
* @cfg: per generation config
}
/**
- * mei_probe - Device Initialization Routine
+ * mei_me_probe - Device Initialization Routine
*
* @pdev: PCI device structure
* @ent: entry in kcs_pci_tbl
}
/**
- * mei_remove - Device Removal Routine
+ * mei_me_remove - Device Removal Routine
*
* @pdev: PCI device structure
*
projects / firefly-linux-kernel-4.4.55.git / commitdiff