igb: Add support for i354 devices
authorCarolyn Wyborny <carolyn.wyborny@intel.com>
Thu, 18 Apr 2013 22:21:30 +0000 (22:21 +0000)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Thu, 18 Apr 2013 23:40:35 +0000 (16:40 -0700)
This patch adds base support for new i354 devices.  Loopback test is
unsupported for this release.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 files changed:
drivers/net/ethernet/intel/igb/e1000_82575.c
drivers/net/ethernet/intel/igb/e1000_82575.h
drivers/net/ethernet/intel/igb/e1000_defines.h
drivers/net/ethernet/intel/igb/e1000_hw.h
drivers/net/ethernet/intel/igb/e1000_mac.c
drivers/net/ethernet/intel/igb/e1000_nvm.c
drivers/net/ethernet/intel/igb/e1000_phy.c
drivers/net/ethernet/intel/igb/e1000_regs.h
drivers/net/ethernet/intel/igb/igb.h
drivers/net/ethernet/intel/igb/igb_ethtool.c
drivers/net/ethernet/intel/igb/igb_main.c
drivers/net/ethernet/intel/igb/igb_ptp.c

index 8ff938d94912b2c13ed6760606f5f7199601ba5c..c9bba39d50bd130cd581a801f7c2abfb33de73ef 100644 (file)
@@ -100,6 +100,7 @@ static bool igb_sgmii_uses_mdio_82575(struct e1000_hw *hw)
                break;
        case e1000_82580:
        case e1000_i350:
+       case e1000_i354:
        case e1000_i210:
        case e1000_i211:
                reg = rd32(E1000_MDICNFG);
@@ -149,6 +150,7 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
                switch (hw->mac.type) {
                case e1000_82580:
                case e1000_i350:
+               case e1000_i354:
                        phy->ops.read_reg = igb_read_phy_reg_82580;
                        phy->ops.write_reg = igb_write_phy_reg_82580;
                        break;
@@ -174,13 +176,14 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
 
        /* Verify phy id and set remaining function pointers */
        switch (phy->id) {
+       case M88E1545_E_PHY_ID:
        case I347AT4_E_PHY_ID:
        case M88E1112_E_PHY_ID:
        case M88E1111_I_PHY_ID:
                phy->type               = e1000_phy_m88;
+               phy->ops.check_polarity = igb_check_polarity_m88;
                phy->ops.get_phy_info   = igb_get_phy_info_m88;
-               if (phy->id == I347AT4_E_PHY_ID ||
-                   phy->id == M88E1112_E_PHY_ID)
+               if (phy->id != M88E1111_I_PHY_ID)
                        phy->ops.get_cable_length =
                                         igb_get_cable_length_m88_gen2;
                else
@@ -287,6 +290,7 @@ static s32 igb_init_nvm_params_82575(struct e1000_hw *hw)
                        nvm->ops.read = igb_read_nvm_spi;
                nvm->ops.write = igb_write_nvm_spi;
                break;
+       case e1000_i354:
        case e1000_i350:
                nvm->ops.validate = igb_validate_nvm_checksum_i350;
                nvm->ops.update = igb_update_nvm_checksum_i350;
@@ -352,6 +356,7 @@ static s32 igb_init_mac_params_82575(struct e1000_hw *hw)
                mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
                break;
        case e1000_i350:
+       case e1000_i354:
                mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
                break;
        default:
@@ -445,6 +450,11 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
        case E1000_DEV_ID_I211_COPPER:
                mac->type = e1000_i211;
                break;
+       case E1000_DEV_ID_I354_BACKPLANE_1GBPS:
+       case E1000_DEV_ID_I354_SGMII:
+       case E1000_DEV_ID_I354_BACKPLANE_2_5GBPS:
+               mac->type = e1000_i354;
+               break;
        default:
                return -E1000_ERR_MAC_INIT;
                break;
@@ -642,6 +652,7 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
                        break;
                case e1000_82580:
                case e1000_i350:
+               case e1000_i354:
                case e1000_i210:
                case e1000_i211:
                        mdic = rd32(E1000_MDICNFG);
@@ -1272,7 +1283,7 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw)
 
        /* Disabling VLAN filtering */
        hw_dbg("Initializing the IEEE VLAN\n");
-       if (hw->mac.type == e1000_i350)
+       if ((hw->mac.type == e1000_i350) || (hw->mac.type == e1000_i354))
                igb_clear_vfta_i350(hw);
        else
                igb_clear_vfta(hw);
@@ -1348,6 +1359,7 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
                switch (hw->phy.id) {
                case I347AT4_E_PHY_ID:
                case M88E1112_E_PHY_ID:
+               case M88E1545_E_PHY_ID:
                case I210_I_PHY_ID:
                        ret_val = igb_copper_link_setup_m88_gen2(hw);
                        break;
@@ -1804,6 +1816,7 @@ void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
                reg_offset = E1000_DTXSWC;
                break;
        case e1000_i350:
+       case e1000_i354:
                reg_offset = E1000_TXSWC;
                break;
        default:
@@ -1845,6 +1858,7 @@ void igb_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable)
                        dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
                wr32(E1000_DTXSWC, dtxswc);
                break;
+       case e1000_i354:
        case e1000_i350:
                dtxswc = rd32(E1000_TXSWC);
                if (enable)
@@ -2365,6 +2379,108 @@ out:
        return ret_val;
 }
 
+/**
+ *  igb_set_eee_i354 - Enable/disable EEE support
+ *  @hw: pointer to the HW structure
+ *
+ *  Enable/disable EEE legacy mode based on setting in dev_spec structure.
+ *
+ **/
+s32 igb_set_eee_i354(struct e1000_hw *hw)
+{
+       struct e1000_phy_info *phy = &hw->phy;
+       s32 ret_val = 0;
+       u16 phy_data;
+
+       if ((hw->phy.media_type != e1000_media_type_copper) ||
+           (phy->id != M88E1545_E_PHY_ID))
+               goto out;
+
+       if (!hw->dev_spec._82575.eee_disable) {
+               /* Switch to PHY page 18. */
+               ret_val = phy->ops.write_reg(hw, E1000_M88E1545_PAGE_ADDR, 18);
+               if (ret_val)
+                       goto out;
+
+               ret_val = phy->ops.read_reg(hw, E1000_M88E1545_EEE_CTRL_1,
+                                           &phy_data);
+               if (ret_val)
+                       goto out;
+
+               phy_data |= E1000_M88E1545_EEE_CTRL_1_MS;
+               ret_val = phy->ops.write_reg(hw, E1000_M88E1545_EEE_CTRL_1,
+                                            phy_data);
+               if (ret_val)
+                       goto out;
+
+               /* Return the PHY to page 0. */
+               ret_val = phy->ops.write_reg(hw, E1000_M88E1545_PAGE_ADDR, 0);
+               if (ret_val)
+                       goto out;
+
+               /* Turn on EEE advertisement. */
+               ret_val = igb_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
+                                            E1000_EEE_ADV_DEV_I354,
+                                            &phy_data);
+               if (ret_val)
+                       goto out;
+
+               phy_data |= E1000_EEE_ADV_100_SUPPORTED |
+                           E1000_EEE_ADV_1000_SUPPORTED;
+               ret_val = igb_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
+                                               E1000_EEE_ADV_DEV_I354,
+                                               phy_data);
+       } else {
+               /* Turn off EEE advertisement. */
+               ret_val = igb_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
+                                            E1000_EEE_ADV_DEV_I354,
+                                            &phy_data);
+               if (ret_val)
+                       goto out;
+
+               phy_data &= ~(E1000_EEE_ADV_100_SUPPORTED |
+                             E1000_EEE_ADV_1000_SUPPORTED);
+               ret_val = igb_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
+                                             E1000_EEE_ADV_DEV_I354,
+                                             phy_data);
+       }
+
+out:
+       return ret_val;
+}
+
+/**
+ *  igb_get_eee_status_i354 - Get EEE status
+ *  @hw: pointer to the HW structure
+ *  @status: EEE status
+ *
+ *  Get EEE status by guessing based on whether Tx or Rx LPI indications have
+ *  been received.
+ **/
+s32 igb_get_eee_status_i354(struct e1000_hw *hw, bool *status)
+{
+       struct e1000_phy_info *phy = &hw->phy;
+       s32 ret_val = 0;
+       u16 phy_data;
+
+       /* Check if EEE is supported on this device. */
+       if ((hw->phy.media_type != e1000_media_type_copper) ||
+           (phy->id != M88E1545_E_PHY_ID))
+               goto out;
+
+       ret_val = igb_read_xmdio_reg(hw, E1000_PCS_STATUS_ADDR_I354,
+                                    E1000_PCS_STATUS_DEV_I354,
+                                    &phy_data);
+       if (ret_val)
+               goto out;
+
+       *status = phy_data & (E1000_PCS_STATUS_TX_LPI_RCVD |
+                             E1000_PCS_STATUS_RX_LPI_RCVD) ? true : false;
+
+out:
+       return ret_val;
+}
+
 static const u8 e1000_emc_temp_data[4] = {
        E1000_EMC_INTERNAL_DATA,
        E1000_EMC_DIODE1_DATA,
index 0d318ac1481894ddfd497e34c1e5dc2160c0dc1d..74a1506b42359d02305ea9d78cda7e536633559f 100644 (file)
@@ -265,6 +265,7 @@ void igb_vmdq_set_replication_pf(struct e1000_hw *, bool);
 u16 igb_rxpbs_adjust_82580(u32 data);
 s32 igb_read_emi_reg(struct e1000_hw *, u16 addr, u16 *data);
 s32 igb_set_eee_i350(struct e1000_hw *);
+s32 igb_set_eee_i354(struct e1000_hw *);
 s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *);
 s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw);
 
index f3d87d7b9fdccd89ec65a30580fb46a86c871c51..31a0f82cc650b9ae1eca5940d2f939632c337dcc 100644 (file)
 #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000
 /* BMC external code execution disabled */
 
+#define E1000_STATUS_2P5_SKU           0x00001000 /* Val of 2.5GBE SKU strap */
+#define E1000_STATUS_2P5_SKU_OVER      0x00002000 /* Val of 2.5GBE SKU Over */
 /* Constants used to intrepret the masked PCI-X bus speed. */
 
 #define SPEED_10    10
 #define SPEED_100   100
 #define SPEED_1000  1000
+#define SPEED_2500  2500
 #define HALF_DUPLEX 1
 #define FULL_DUPLEX 2
 
 #define I350_I_PHY_ID        0x015403B0
 #define M88_VENDOR           0x0141
 #define I210_I_PHY_ID        0x01410C00
+#define M88E1545_E_PHY_ID    0x01410EA0
 
 /* M88E1000 Specific Registers */
 #define M88E1000_PHY_SPEC_CTRL     0x10  /* PHY Specific Control Register */
 #define E1000_EEE_LP_ADV_DEV_I210    7           /* EEE LP Adv Device */
 #define E1000_EEE_LP_ADV_ADDR_I210   61          /* EEE LP Adv Register */
 #define E1000_MMDAC_FUNC_DATA        0x4000      /* Data, no post increment */
+#define E1000_M88E1545_PAGE_ADDR       0x16       /* Page Offset Register */
+#define E1000_M88E1545_EEE_CTRL_1      0x0
+#define E1000_M88E1545_EEE_CTRL_1_MS   0x0001     /* EEE Master/Slave */
+#define E1000_EEE_ADV_DEV_I354         7
+#define E1000_EEE_ADV_ADDR_I354                60
+#define E1000_EEE_ADV_100_SUPPORTED    (1 << 1)   /* 100BaseTx EEE Supported */
+#define E1000_EEE_ADV_1000_SUPPORTED   (1 << 2)   /* 1000BaseT EEE Supported */
+#define E1000_PCS_STATUS_DEV_I354      3
+#define E1000_PCS_STATUS_ADDR_I354     1
+#define E1000_PCS_STATUS_TX_LPI_IND    0x0200     /* Tx in LPI state */
+#define E1000_PCS_STATUS_RX_LPI_RCVD   0x0400
+#define E1000_PCS_STATUS_TX_LPI_RCVD   0x0800
 
 /* SerDes Control */
 #define E1000_GEN_CTL_READY             0x80000000
index 84df815ea0e883908ac619a2934567fc72c50816..1138ccaf95ff13ad3a78eb74c1a74f6dcccd010d 100644 (file)
@@ -70,6 +70,9 @@ struct e1000_hw;
 #define E1000_DEV_ID_I210_SERDES               0x1537
 #define E1000_DEV_ID_I210_SGMII                        0x1538
 #define E1000_DEV_ID_I211_COPPER               0x1539
+#define E1000_DEV_ID_I354_BACKPLANE_1GBPS      0x1F40
+#define E1000_DEV_ID_I354_SGMII                        0x1F41
+#define E1000_DEV_ID_I354_BACKPLANE_2_5GBPS    0x1F45
 
 #define E1000_REVISION_2 2
 #define E1000_REVISION_4 4
@@ -90,6 +93,7 @@ enum e1000_mac_type {
        e1000_82576,
        e1000_82580,
        e1000_i350,
+       e1000_i354,
        e1000_i210,
        e1000_i211,
        e1000_num_macs  /* List is 1-based, so subtract 1 for true count. */
index afbab053269b0051dea18129411007229ae1e915..2559d70a2321b717b05b167a2c1c3a5b4f9f44a6 100644 (file)
@@ -214,7 +214,7 @@ s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add)
                else
                        vfta &= ~mask;
        }
-       if (hw->mac.type == e1000_i350)
+       if ((hw->mac.type == e1000_i350) || (hw->mac.type == e1000_i354))
                igb_write_vfta_i350(hw, index, vfta);
        else
                igb_write_vfta(hw, index, vfta);
@@ -1171,6 +1171,17 @@ s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
                hw_dbg("Half Duplex\n");
        }
 
+       /* Check if it is an I354 2.5Gb backplane connection. */
+       if (hw->mac.type == e1000_i354) {
+               if ((status & E1000_STATUS_2P5_SKU) &&
+                   !(status & E1000_STATUS_2P5_SKU_OVER)) {
+                       *speed = SPEED_2500;
+                       *duplex = FULL_DUPLEX;
+                       hw_dbg("2500 Mbs, ");
+                       hw_dbg("Full Duplex\n");
+               }
+       }
+
        return 0;
 }
 
index 5e0dd0a8d7a8488c6ec4bed9064a3c56fbb4fb24..7f9cd7cbd353debcbb5eb20ba44ebd36ec61abcc 100644 (file)
@@ -721,6 +721,7 @@ void igb_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers)
        case e1000_82575:
        case e1000_82576:
        case e1000_82580:
+       case e1000_i354:
        case e1000_i350:
        case e1000_i210:
                break;
@@ -739,6 +740,7 @@ void igb_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers)
 
        switch (hw->mac.type) {
        case e1000_i210:
+       case e1000_i354:
        case e1000_i350:
                /* find combo image version */
                hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset);
index 72a44095c5068697aea2e2c2da24f845e8379e3c..fd46add6c4e43edced517b3bdcffbb77d1cad969 100644 (file)
@@ -1682,6 +1682,7 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw)
                phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
                phy->cable_length = phy_data / (is_cm ? 100 : 1);
                break;
+       case M88E1545_E_PHY_ID:
        case I347AT4_E_PHY_ID:
                /* Remember the original page select and set it to 7 */
                ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
index bdfc0403c6fc292de502e7f4aa43bf0f9fbc862b..82632c6c53afcb37239f2898eea9a01f5f95edfd 100644 (file)
@@ -65,6 +65,7 @@
 #define E1000_TIPG     0x00410  /* TX Inter-packet gap -RW */
 #define E1000_AIT      0x00458  /* Adaptive Interframe Spacing Throttle - RW */
 #define E1000_LEDCTL   0x00E00  /* LED Control - RW */
+#define E1000_LEDMUX   0x08130  /* LED MUX Control */
 #define E1000_PBA      0x01000  /* Packet Buffer Allocation - RW */
 #define E1000_PBS      0x01008  /* Packet Buffer Size */
 #define E1000_EEMNGCTL 0x01010  /* MNG EEprom Control */
@@ -83,6 +84,9 @@
 #define E1000_I2C_DATA_IN   0x00001000  /* I2C- Data In */
 #define E1000_I2C_CLK_OE_N  0x00002000  /* I2C- Clock Output Enable */
 #define E1000_I2C_CLK_IN    0x00004000  /* I2C- Clock In */
+#define E1000_MPHY_ADDR_CTRL   0x0024 /* GbE MPHY Address Control */
+#define E1000_MPHY_DATA                0x0E10 /* GBE MPHY Data */
+#define E1000_MPHY_STAT                0x0E0C /* GBE MPHY Statistics */
 
 /* IEEE 1588 TIMESYNCH */
 #define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */
index d47ac2ae1b41d1743bda42349fe4ba8dbad44572..c92115e71ebea810287df4515f98611bd908fcf5 100644 (file)
@@ -122,9 +122,9 @@ struct vf_data_storage {
  *           descriptors until either it has this many to write back, or the
  *           ITR timer expires.
  */
-#define IGB_RX_PTHRESH 8
+#define IGB_RX_PTHRESH ((hw->mac.type == e1000_i354) ? 12 : 8)
 #define IGB_RX_HTHRESH 8
-#define IGB_TX_PTHRESH 8
+#define IGB_TX_PTHRESH ((hw->mac.type == e1000_i354) ? 20 : 8)
 #define IGB_TX_HTHRESH 1
 #define IGB_RX_WTHRESH ((hw->mac.type == e1000_82576 && \
                          adapter->msix_entries) ? 1 : 4)
index 8412f9746c78440b3d1ac4a61efa10572e234b94..48b594701efa7f51f5b975ec37aac3e70602b1f1 100644 (file)
@@ -181,18 +181,29 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
                ecmd->phy_address = hw->phy.addr;
                ecmd->transceiver = XCVR_INTERNAL;
        } else {
-               ecmd->supported   = (SUPPORTED_1000baseT_Full |
-                                    SUPPORTED_100baseT_Full |
-                                    SUPPORTED_Autoneg |
-                                    SUPPORTED_FIBRE |
-                                    SUPPORTED_Pause);
+               ecmd->supported = (SUPPORTED_1000baseT_Full |
+                                  SUPPORTED_100baseT_Full |
+                                  SUPPORTED_FIBRE |
+                                  SUPPORTED_Autoneg |
+                                  SUPPORTED_Pause);
+               if (hw->mac.type == e1000_i354)
+                               ecmd->supported |= SUPPORTED_2500baseX_Full;
 
                ecmd->advertising = ADVERTISED_FIBRE;
 
-               if (adapter->link_speed == SPEED_100)
-                       ecmd->advertising = ADVERTISED_100baseT_Full;
-               else if (adapter->link_speed == SPEED_1000)
+               switch (adapter->link_speed) {
+               case SPEED_2500:
+                       ecmd->advertising = ADVERTISED_2500baseX_Full;
+                       break;
+               case SPEED_1000:
                        ecmd->advertising = ADVERTISED_1000baseT_Full;
+                       break;
+               case SPEED_100:
+                       ecmd->advertising = ADVERTISED_100baseT_Full;
+                       break;
+               default:
+                       break;
+               }
 
                if (hw->mac.autoneg == 1)
                        ecmd->advertising |= ADVERTISED_Autoneg;
@@ -204,21 +215,23 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
        status = rd32(E1000_STATUS);
 
        if (status & E1000_STATUS_LU) {
-
-               if (status & E1000_STATUS_SPEED_1000)
-                       ethtool_cmd_speed_set(ecmd, SPEED_1000);
+               if ((hw->mac.type == e1000_i354) &&
+                   (status & E1000_STATUS_2P5_SKU) &&
+                   !(status & E1000_STATUS_2P5_SKU_OVER))
+                       ecmd->speed = SPEED_2500;
+               else if (status & E1000_STATUS_SPEED_1000)
+                       ecmd->speed = SPEED_1000;
                else if (status & E1000_STATUS_SPEED_100)
-                       ethtool_cmd_speed_set(ecmd, SPEED_100);
+                       ecmd->speed = SPEED_100;
                else
-                       ethtool_cmd_speed_set(ecmd, SPEED_10);
-
+                       ecmd->speed = SPEED_10;
                if ((status & E1000_STATUS_FD) ||
                    hw->phy.media_type != e1000_media_type_copper)
                        ecmd->duplex = DUPLEX_FULL;
                else
                        ecmd->duplex = DUPLEX_HALF;
        } else {
-               ethtool_cmd_speed_set(ecmd, -1);
+               ecmd->speed = -1;
                ecmd->duplex = -1;
        }
 
@@ -281,12 +294,22 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
                        hw->phy.autoneg_advertised = ecmd->advertising |
                                                     ADVERTISED_FIBRE |
                                                     ADVERTISED_Autoneg;
-                       if (adapter->link_speed == SPEED_1000)
+                       switch (adapter->link_speed) {
+                       case SPEED_2500:
+                               hw->phy.autoneg_advertised =
+                                       ADVERTISED_2500baseX_Full;
+                               break;
+                       case SPEED_1000:
                                hw->phy.autoneg_advertised =
                                        ADVERTISED_1000baseT_Full;
-                       else if (adapter->link_speed == SPEED_100)
+                               break;
+                       case SPEED_100:
                                hw->phy.autoneg_advertised =
                                        ADVERTISED_100baseT_Full;
+                               break;
+                       default:
+                               break;
+                       }
                } else {
                        hw->phy.autoneg_advertised = ecmd->advertising |
                                                     ADVERTISED_TP |
@@ -1225,6 +1248,7 @@ static int igb_reg_test(struct igb_adapter *adapter, u64 *data)
 
        switch (adapter->hw.mac.type) {
        case e1000_i350:
+       case e1000_i354:
                test = reg_test_i350;
                toggle = 0x7FEFF3FF;
                break;
@@ -1387,6 +1411,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
                ics_mask = 0x77DCFED5;
                break;
        case e1000_i350:
+       case e1000_i354:
        case e1000_i210:
        case e1000_i211:
                ics_mask = 0x77DCFED5;
@@ -1881,6 +1906,13 @@ static int igb_loopback_test(struct igb_adapter *adapter, u64 *data)
                *data = 0;
                goto out;
        }
+
+       if (adapter->hw.mac.type == e1000_i354) {
+               dev_info(&adapter->pdev->dev,
+                       "Loopback test not supported on i354.\n");
+               *data = 0;
+               goto out;
+       }
        *data = igb_setup_desc_rings(adapter);
        if (*data)
                goto out;
@@ -2311,6 +2343,7 @@ static int igb_get_ts_info(struct net_device *dev,
        case e1000_82576:
        case e1000_82580:
        case e1000_i350:
+       case e1000_i354:
        case e1000_i210:
        case e1000_i211:
                info->so_timestamping =
index 666f87c4bfa311badebb52fe6cbf69369bf92b2b..38590252be642a34206ee179e51c51761cd6c2a0 100644 (file)
@@ -77,6 +77,9 @@ static const struct e1000_info *igb_info_tbl[] = {
 };
 
 static DEFINE_PCI_DEVICE_TABLE(igb_pci_tbl) = {
+       { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_1GBPS) },
+       { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_SGMII) },
+       { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_2_5GBPS) },
        { PCI_VDEVICE(INTEL, E1000_DEV_ID_I211_COPPER), board_82575 },
        { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER), board_82575 },
        { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_FIBER), board_82575 },
@@ -735,6 +738,7 @@ static void igb_cache_ring_register(struct igb_adapter *adapter)
        case e1000_82575:
        case e1000_82580:
        case e1000_i350:
+       case e1000_i354:
        case e1000_i210:
        case e1000_i211:
        default:
@@ -820,6 +824,7 @@ static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector)
                break;
        case e1000_82580:
        case e1000_i350:
+       case e1000_i354:
        case e1000_i210:
        case e1000_i211:
                /* On 82580 and newer adapters the scheme is similar to 82576
@@ -887,6 +892,7 @@ static void igb_configure_msix(struct igb_adapter *adapter)
        case e1000_82576:
        case e1000_82580:
        case e1000_i350:
+       case e1000_i354:
        case e1000_i210:
        case e1000_i211:
                /* Turn on MSI-X capability first, or our settings
@@ -1238,7 +1244,8 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter,
                if (adapter->hw.mac.type >= e1000_82576)
                        set_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags);
 
-               /* On i350, i210, and i211, loopback VLAN packets
+               /*
+                * On i350, i354, i210, and i211, loopback VLAN packets
                 * have the tag byte-swapped.
                 */
                if (adapter->hw.mac.type >= e1000_i350)
@@ -1713,6 +1720,7 @@ void igb_reset(struct igb_adapter *adapter)
         */
        switch (mac->type) {
        case e1000_i350:
+       case e1000_i354:
        case e1000_82580:
                pba = rd32(E1000_RXPBS);
                pba = igb_rxpbs_adjust_82580(pba);
@@ -2317,17 +2325,20 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
        igb_ptp_init(adapter);
 
        dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n");
-       /* print bus type/speed/width info */
-       dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n",
-                netdev->name,
-                ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
-                 (hw->bus.speed == e1000_bus_speed_5000) ? "5.0Gb/s" :
-                  "unknown"),
-                ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
-                 (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" :
-                 (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" :
-                  "unknown"),
-                netdev->dev_addr);
+       /* print bus type/speed/width info, not applicable to i354 */
+       if (hw->mac.type != e1000_i354) {
+               dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n",
+                        netdev->name,
+                        ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
+                         (hw->bus.speed == e1000_bus_speed_5000) ? "5.0Gb/s" :
+                          "unknown"),
+                        ((hw->bus.width == e1000_bus_width_pcie_x4) ?
+                         "Width x4" :
+                         (hw->bus.width == e1000_bus_width_pcie_x2) ?
+                         "Width x2" :
+                         (hw->bus.width == e1000_bus_width_pcie_x1) ?
+                         "Width x1" : "unknown"), netdev->dev_addr);
+       }
 
        ret_val = igb_read_part_string(hw, part_str, E1000_PBANUM_LENGTH);
        if (ret_val)
@@ -2344,6 +2355,13 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
        case e1000_i211:
                igb_set_eee_i350(hw);
                break;
+       case e1000_i354:
+               if (hw->phy.media_type == e1000_media_type_copper) {
+                       if ((rd32(E1000_CTRL_EXT) &
+                           E1000_CTRL_EXT_LINK_MODE_SGMII))
+                               igb_set_eee_i354(hw);
+               }
+               break;
        default:
                break;
        }
@@ -2597,6 +2615,7 @@ static void igb_init_queue_configuration(struct igb_adapter *adapter)
                }
                /* fall through */
        case e1000_82580:
+       case e1000_i354:
        default:
                max_rss_queues = IGB_MAX_RX_QUEUES;
                break;
@@ -2621,6 +2640,7 @@ static void igb_init_queue_configuration(struct igb_adapter *adapter)
                /* fall through */
        case e1000_82580:
        case e1000_i350:
+       case e1000_i354:
        case e1000_i210:
        default:
                /* If rss_queues > half of max_rss_queues, pair the queues in
@@ -7649,6 +7669,7 @@ static void igb_vmm_control(struct igb_adapter *adapter)
        case e1000_82575:
        case e1000_i210:
        case e1000_i211:
+       case e1000_i354:
        default:
                /* replication is not supported for 82575 */
                return;
@@ -7722,7 +7743,9 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
                        reg |= (1000 >> 5);
 
                        /* Disable BMC-to-OS Watchdog Enable */
-                       reg &= ~E1000_DMACR_DC_BMC2OSW_EN;
+                       if (hw->mac.type != e1000_i354)
+                               reg &= ~E1000_DMACR_DC_BMC2OSW_EN;
+
                        wr32(E1000_DMACR, reg);
 
                        /* no lower threshold to disable
index 9f7da269edc330ed6e26fcb23f6fe87f645463a3..7e8c477b0ab9fb6e2758a763411dbde42ae57769 100644 (file)
@@ -171,6 +171,7 @@ static void igb_ptp_systim_to_hwtstamp(struct igb_adapter *adapter,
        switch (adapter->hw.mac.type) {
        case e1000_82576:
        case e1000_82580:
+       case e1000_i354:
        case e1000_i350:
                spin_lock_irqsave(&adapter->tmreg_lock, flags);
 
@@ -735,6 +736,7 @@ void igb_ptp_init(struct igb_adapter *adapter)
                wr32(E1000_TIMINCA, INCPERIOD_82576 | INCVALUE_82576);
                break;
        case e1000_82580:
+       case e1000_i354:
        case e1000_i350:
                snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr);
                adapter->ptp_caps.owner = THIS_MODULE;
@@ -823,6 +825,7 @@ void igb_ptp_stop(struct igb_adapter *adapter)
        switch (adapter->hw.mac.type) {
        case e1000_82576:
        case e1000_82580:
+       case e1000_i354:
        case e1000_i350:
                cancel_delayed_work_sync(&adapter->ptp_overflow_work);
                break;
@@ -867,6 +870,7 @@ void igb_ptp_reset(struct igb_adapter *adapter)
                wr32(E1000_TIMINCA, INCPERIOD_82576 | INCVALUE_82576);
                break;
        case e1000_82580:
+       case e1000_i354:
        case e1000_i350:
        case e1000_i210:
        case e1000_i211: